Matijević, Božidar and Pedišić, Ljiljana and Vlašić, Leon (2012) The influence of quenchant composition on the cooling rate. = The influence of quenchant composition on the cooling rate. HTM Journal of Heat Treatment and Materials, 67 (2). pp. 100-105. ISSN 0341-101X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Full text not available from this repository.Abstract
Adequate selection of quenching media decreases the risk of tensile stresses, and also of cracking and workpiece distortion. High-performance quenching oils must have very high oxidation and thermal resistance and low sludge formation, must be non-staining and have a high lash point and acceptable heat-transfer characteristics. The quenching media contain a base oil and different types of additives according to application requirements. Mineral oils, synthetic and natural oils, used separately or in combination, may be used as base oils. Mineral base oils are widely used because of their advantages with respect to stability in comparison to natural oils, or lower prices in comparison to synthetic oils. There are numerous compounds available for use but, besides their functional properties, the environmental and safety requirements have to be considered in the selection of components. Based on that, barium additives must be replaced with less harmful compounds. Petroleum derivatives should be replaced with renewable base stocks that are biodegradable, which is a general trend in lubricant development. By changing the composition of quenching oils, base oils and additives, heat transfer characteristics are also changed. In this study, the results of investigation into physical and chemical properties and also cooling characteristics of new quenching oils with different compositions are presented. Cooling curves for different compositions have been evaluated according to the ISO 9950 Standard. © 2012 Carl Hanser Verlag, München.
| Item Type: | Article (["eprint_fieldopt_article_type_article" not defined]) |
|---|---|
| Keywords (Croatian): | Application requirements; Base oil; Base stock; Cooling characteristics; Cooling curve; Cooling rates; Functional properties; General trends; Harmful compounds; Heat transfer characteristics; Mineral base oil; Natural oil; Physical and chemical properties; Quenchants; Quenching media; Quenching Oil; Safety requirements; Sludge formation; Synthetic oil; Work pieces; Heat-transfer characteristics; Metal heat treatments; Barium; Chemical properties; Hardening; Mineral oils; Phase diagrams; Quenching |
| Subjects: | TECHNICAL SCIENCE |
| Divisions: | 1000 Department of Materials > 1020 Chair of Heat Treatment and Surface Engineering |
| Indexed in Web of Science: | No |
| Indexed in Current Contents: | No |
| Citations SCOPUS: | 0 (14.03.2016.) |
| Date Deposited: | 28 Apr 2015 12:28 |
| Last Modified: | 14 Mar 2016 13:14 |
| URI: | http://repozitorij.fsb.hr/id/eprint/3942 |
Actions (login required)
 |
View Item |
Citations:
Citations: