Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces

Liščić, Božidar and Singer, Saša and Beitz, Hartmut (2012) Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces. = Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces. In: 18th International Federation for Heat Treatment and Surface Engineering Congress, IFHTSE 2010, 26-30.07.2010., Rio de Janeiro; Brazil.

[img]
Preview
Text
Dummy article.pdf - Draft Version Jezik dokumenta:English

Download (79kB) | Preview
Official URL: http://www.scopus.com/inward/record.url?eid=2-s2.0...

Abstract

For computer simulation of a quenching process, the fundamental prerequisite is to have the relevant heat transfer coefficient (HTC) calculated as function of workpiece's surface temperature and time respectively. In order to calculate the HTC, experimental measurement of the temperature-time history (cooling curve) near the workpiece surface is necessary. In this investigation, cylindrical probes of 20, 50, and 80 mm diameter are used. The cooling curve was measured always at 1 mm below the surface of the probe. Special care has been taken to keep all other factors (design of the probes, temperature measurement, quenching conditions, and calculation procedure), which can influence on the calculated HTC, constant to assure that the only variable is the diameter of the probe. Supposing a radially symmetrical heat flow at half length of the probe, the HTC was calculated using one-dimensional (1-D) inverse heat conduction method. The unexpected striking result of this investigation is the fact that for biggest probe diameter (80 mm), the calculated HTC as function of surface temperature does not show the film boiling phase. A plausible explanation of this effect is given based on the critical heat flux density. The possibility to establish a simple fixed relation (a correction factor) between the HTC and the diameter of cylinders is discussed. Copyright © 2011 by ASTM International.

Item Type: Conference or Workshop Item (Lecture)
Keywords (Croatian): Atmospheric temperature; Computer simulation; Heat flux; Heat transfer coefficients; Phase diagrams; Probes; Surface properties; Surfaces; Temperature measurement; Calculation procedure; Cooling curve; Correction factors; Experimental measurements; Film boiling; Inverse heat conduction; Inverse heat conduction methods; Quenching process; Surface temperatures; Quenching
Subjects: NATURAL SCIENCES > Mathematics
TECHNICAL SCIENCE > Mechanical Engineering
Divisions: 1000 Department of Materials
Indexed in Web of Science: No
Indexed in Current Contents: No
Citations SCOPUS: 0 (10.7.2015.)
Date Deposited: 24 Apr 2015 11:59
Last Modified: 10 Jul 2015 09:06
URI: http://repozitorij.fsb.hr/id/eprint/3984

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

Nema podataka za dohvacanje citata