Oblikovanje postolja za dvoručni robot

Ban, Michael (2016) Oblikovanje postolja za dvoručni robot. = Design of a stand for two-handed robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

[img]
Preview
Text
Ban_2016_zavrsni_preddiplomski.pdf - Published Version Jezik dokumenta:Croatian

Download (3MB) | Preview

Abstract (Croatian)

U ovom radu provodi se konstrukcija postolja za dvoručnog UR5 robota. Konstrukcija počinje odabirom materijala za postolje i odabirom standardiziranih profila koji se nalaze na tržištu. Nakon toga, proučava se trag baze (eng. footprint) UR5 robota kako bi se procijenilo koja bi se veličina poprečnog presjeka mogla primjeniti. Procijenjena veličina poprečnog presjeka profila, analizira se metodom konačnih elemenata koja pokazuje je li procjena dobra. Nakon konstrukcije osnovnog dijela postolja, slijedi dodavanje elemenata koji će osigurati stabilnost konstrukcije, te smanjiti naprezanja u osnovnom dijelu postolja. Nakon toga slijedi konstrukcija trokutastog nosača stola, te se riješava problem njegove montaže na postolje. Za spajanje robota s postoljem, konstruiraju se spojni elementi, čiji oblik proizlazi iz optimizacije orijentacije baze. Analizom težine postolja odabiru se kotači i noge. Za kraj, prikazuje se kalibracijski alat za kalibraciju robota nakon montaže i demontaže postolja.

Abstract

In this paper, the construction for the stand of the two-handed UR5 robot is carried out. Construction begins with the selection of stand material and standardized profiles which are available on the market. After that, the footprint of UR5 robot, to estimate which dimension of cross-section is applicable, is examined. The chosen profile is analyzed with FEM that indicates whether the estimation was good. After the construction of the base elements of the stand, followed by addition of elements which will secure the construction stability and reduce stress in the base elements of the stand, the construction of triangular table carrier is made and the problem of fitting the stand is being solved. To connect the robot to the stand, the coupling elements are being constructed, whose shape is derived from the optimization of the robot base orientation. Legs and wheels are chosen by analyzing the stand weight. In the end, the calibration tool is presented for calibration of robot after assembly and disassembly of the stand.

Item Type: Thesis (Undergraduate thesis)
Uncontrolled Keywords: dvoručni robot; postolje; mke; stabilnost; kalibracija
Keywords (Croatian): two-handed robot; stand; FEM; stability; calibration
Subjects: TECHNICAL SCIENCE > Mechanical Engineering
Divisions: 900 Department of Robotics and Production System Automation > 920 Chair of Manufacturing and Assembly System Planning
Date Deposited: 19 Sep 2016 09:02
Last Modified: 19 Sep 2016 09:02
URI: http://repozitorij.fsb.hr/id/eprint/6287

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

Nema podataka za dohvacanje citata