Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel

Landek, Darko and Cajner, Franjo and Kovačić, Saša and Alar, Vesna and Macura, Vladimir (2015) Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel. = Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel. In: The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20-22.05.2015, Venecija, Italija.

Full text not available from this repository.

Abstract

The paper compares the corrosion resistance of the TiN/TiCN coatings applied to samples of hardened and tempered tool steel for cold work grade K390 MC in relation to the plasma nitrided and non-coated samples. The multilayer coating of the TiN/TiCN is produced by a plasma-assisted chemical deposition from the vapor phase (PACVD) in industrial furnaces with hot wall. Plasma nitriding is performed in the same furnace in a separate cycle. Corrosion tests for determining the density of corrosion current, corrosion potential and corrosion rate were carried out using electrochemical polarization in aqueous 3.5% NaCl. Investigation of factors affecting coating’s corrosion resistance included testing of surface roughness before and after deposition, testing of chemical composition and structure of the coating. The microstructure and chemical composition of the coatings were examined by scanning electron microscopy (SEM). The results showing the increasing of the corrosion resistance of the TiN/TiCN coating three times in comparison with non-coated samples and the samples were plasma nitrided without a compound layer. The multilayer TiN/TiCN coating corrodes with a pitting corrosion, while non-coated and plasma nitrided samples corrode with local and general corrosion.

Item Type: Conference or Workshop Item (Lecture)
Keywords (Croatian): DC PACVD, TiN/TiCN coating, K390 MC tool steel, corrosion resistance, Tafel extrapolation
Subjects: TECHNICAL SCIENCE > Mechanical Engineering
Divisions: 1000 Department of Materials > 1020 Chair of Heat Treatment and Surface Engineering
1100 Department of Welded Structures > 1120 Chair of Materials Protection
Date Deposited: 20 Sep 2016 08:24
Last Modified: 20 Sep 2016 08:24
URI: http://repozitorij.fsb.hr/id/eprint/6455

Actions (login required)

View Item View Item

Nema podataka za dohvacanje citata