Characterization of the cooling liquid after the machining of alumina ceramics

Pedišić, Ljiljana and Ćurković, Lidija and Ciglar, Damir and Matijašić, Gordana (2011) Characterization of the cooling liquid after the machining of alumina ceramics. = Characterization of the cooling liquid after the machining of alumina ceramics. In: Computer integrated manufacturing and high speed machining, 16-18.06.2011., Biograd, Hrvatska.

Full text not available from this repository.
Official URL: https://bib.irb.hr/prikazi-rad?&rad=517646

Abstract

A synthetic liquid (5 % water solution) was used during the fine grinding of alumina (Al2O3) ceramics. In order to characterize the synthetic liquid, its physical and chemical properties, corrosion protection, foaming, coolant and lubricant properties were determined. These parameters were determined before machining and after fine grinding. The liquid contains particles of the treated material after fine grinding. Therefore, the particle size distribution was determined in order to select a method for removing solid particles before the liquid is reused. Results of investigation indicated that the physical and chemical properties of the used synthetic liquid did not change after machining, which means that the liquid can be reused after an adequate solid-liquid separation method has been applied.

Item Type: Conference or Workshop Item (Poster)
Keywords (Croatian): synthetic liquid, fine grinding, Al2O3 ceramics.
Subjects: NATURAL SCIENCES > Chemistry
TECHNICAL SCIENCE > Mechanical Engineering
Divisions: 1000 Department of Materials > 1010 Chair of Materials and Tribology
1200 Department of Technology > 1230 Chair of Machine Tools
Date Deposited: 20 Sep 2016 14:22
Last Modified: 20 Sep 2016 14:22
URI: http://repozitorij.fsb.hr/id/eprint/6530

Actions (login required)

View Item View Item

Nema podataka za dohvacanje citata