Compression of aluminium foams with different strain rate

Grilec, Krešimir and Marić, Gojko and Alar, Željko (2013) Compression of aluminium foams with different strain rate. = Compression of aluminium foams with different strain rate. In: 3rd International Conference on Mechanical Technologies and Structural Materials, Split, Hrvatska.

Full text not available from this repository.

Abstract

Aluminium foam is, principally, a composite material consisting of aluminium or aluminium alloy matrix and of pores filled up with a gas distributed throughout the matrix. Foamed materials in general, and aluminium foams in particular, demonstrate a number of interesting properties due to their porous structure, which makes them usable in a wide range of applications. Under compression, foamed materials show a unique stress – strain response with a plateau region in which the stress is nearly constant over a wide range of strain. In this paper, several samples of closed cell aluminium foams were produced from an Alulight AlMgSi 0, 6 TiH2 - 0, 4 precursor. The compressive deformation was examined using universal test machine. The strain rate was 10-3 s-1 and 10-2 s- 1. Results show that the stress-strain curves depends on strain rate in a range of quasi-static compression and curves are similar but not overlapping. The higher speed tests have less expressed and lower value of the plateau stress.

Item Type: Conference or Workshop Item (Lecture)
Keywords (Croatian): aluminium foam, compression test, strain rate
Subjects: TECHNICAL SCIENCE > Mechanical Engineering
Divisions: 1000 Department of Materials > 1010 Chair of Materials and Tribology
Date Deposited: 21 Sep 2016 06:45
Last Modified: 21 Sep 2016 06:45
URI: http://repozitorij.fsb.hr/id/eprint/6560

Actions (login required)

View Item View Item

Nema podataka za dohvacanje citata