Numerička analiza zamora u korijenu zuba cilindričnog zupčanika

Čular, Ivan (2017) Numerička analiza zamora u korijenu zuba cilindričnog zupčanika. = Numerical fatigue analysis of a spur gear tooth root. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

[img]
Preview
Text
Čular_2017_diplomski.pdf - Published Version Jezik dokumenta:Croatian

Download (6MB) | Preview
[img] Text
Čular_Ivan_autorska_izjava_diplomski_2017.pdf - Published Version
Restricted to Repository staff only Jezik dokumenta:Croatian

Download (500kB)

Abstract (Croatian)

U ovom radu korištenjem metode konačnih elemenata i principa lokalne deformacije (ε-N metoda) te programskih paketa Abaqus i FE-Safe izvršena je simulacija nastanka pukotine u korijenu zuba cilindričnih čeličnih zupčanika s ravnim zubima. Budući da je potrebno sa što većom točnošću aproksimirati stvarne uvjete eksperimenta, faktori kao što su centrifugalna sila, trenje, hrapavost površine i zaostala naprezanja uslijed obrade površine su također uzeti u obzir. Kako bi se ubrzao proces loma zuba zupčanika a samim time i vrijeme do nastanka pukotine, u korijenu zuba napravljen je zarez EDM (Electrical Discharge Machining) postupkom. Dobiveni rezultati, odnosno broj ciklusa do nastanka pukotine u korijenu zuba uspoređeni su s eksperimentalnim rezultatima iz kojih su preuzeti podaci o zupčanicima, kao i s drugim numeričkim analizama iz dostupne literature.

Abstract

In this thesis, finite element method and local stress-strain fatigue method (ε-N) are used in combination with software programs Abaqus and FE-Safe to carry out a crack initiation simulation in the area of cylindrical spur gear tooth root. In order to increase the accuracy of the simulaction, real life conditions have to be taken into account such as centrifugal force, friction, material surface finish and residual stress as a result of heat treatment processes. In the interest of saving time, a small notch was created in the tooth root via EDM method, resulting in a significant decrease in gear work life, subsequently reducing the time needed for the crack initiation. Results obtained by numerical analyses, i.e. number of cycles needed for crack initiation are then compared to the experimental and numerical results provided in the avaliable literature from where geometrical and material parameters of the gear pair were obtained.

Item Type: Thesis (Master's thesis (Bologna))
Uncontrolled Keywords: zupčanik, niskociklički zamor materijala, ciklus naprezanja, tanki vijenac, metoda konačnih elemenata, MKE, princip lokalne deformacije
Keywords (Croatian): gear, low-cycle fatigue, stress cycle, thin rim, finite element method, FEM, stress-strain method
Subjects: TECHNICAL SCIENCE > Mechanical Engineering
Divisions: 100 Department of Design > 120 Chair of Machine Elements
Date Deposited: 13 Jul 2017 08:28
Last Modified: 18 Mar 2020 12:19
URI: http://repozitorij.fsb.hr/id/eprint/7778

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year