Items where Author is "Markučič, Damir"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 19.

Thesis

Markučič, Damir (1998) Razvoj metodologije ultrazvučne kontrole podvodnih konstrukcija. = Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krstelj, Vjera.

Article

Mihaljević, Morana and Cajner, Hrvoje and Runje, Biserka and Markučič, Damir and Keran, Zdenka (2017) Analysis of the couplant influence on the ultrasonic thickness measurement of the steel grade S355J0 = Untersuchung des Einflusses des Koppelmittels auf die Ultraschall-Messung der Probendicke des Stahls S355J0. = Analysis of the couplant influence on the ultrasonic thickness measurement of the steel grade S355J0 = Untersuchung des Einflusses des Koppelmittels auf die Ultraschall-Messung der Probendicke des Stahls S355J0. Materialwissenschaft und Werkstofftechnik, 48 (8). pp. 803-813. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2017). Točan broj autora: 5.

Keran, Zdenka and Mihaljević, Morana and Runje, Biserka and Markučič, Damir (2017) Ultrasonic testing of grain distortion direction in cold formed aluminium profile. = Ultrasonic testing of grain distortion direction in cold formed aluminium profile. Archives of Civil and Mechanical Engineering, 17 (2). pp. 375-381. ISSN 1644-9665. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Mihaljević, Morana and Markučič, Damir and Runje, Biserka (2015) Analysis of influential factors for ultrasonic disc size evaluation. = Analysis of influential factors for ultrasonic disc size evaluation. Materials Testing, 57 (7-8). pp. 674-679. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Hrman, Danijela and Rakvin, Marko and Markučič, Damir (2013) Optimization of scanning parameters of computed radiography for characterization of expanded polystyrene. = Optimization of scanning parameters of computed radiography for characterization of expanded polystyrene. Transactions of FAMENA, 37 (3). pp. 53-64. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Medić, Srđan and Runje, Biserka and Groš, Josip and Markučič, Damir (2013) Postupci primjene norme ISO/TS 29001:2010 u proizvodnim tvrtkama RH. = Procedures for the implementation of ISO/TS 29001:2010 in the Croatian manufacturing companies. Tehnički glasnik, 7 (3). pp. 306-310. ISSN 1864-6168. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Markučič, Damir and Runje, Biserka and Stepanić, Josip (2011) Assessment of uncertainty in modelled ultrasonic thickness measurements. = Assessment of uncertainty in modelled ultrasonic thickness measurements. Materialprufung, 53 (4). pp. 233-237. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.

Markučič, Damir and Mihaljević, Morana and Guliš, Matija (2011) Simulation of ultrasonic pulse propagation through multiple curved boundaries. = Simulation of ultrasonic pulse propagation through multiple curved boundaries. Transactions of FAMENA, 35 (3). pp. 1-12. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.

Conference or Workshop Item

Vukoja, Matija and Markučič, Damir and Mihaljević, Morana (2017) Analysis of the standard requirements for characterization procedures for ultrasonic thickness gauges. = Analysis of the standard requirements for characterization procedures for ultrasonic thickness gauges. In: MTECH international conference on materials, 04-07.10.2017., Zadar, Hrvatska.

Mihaljević, Morana and Markučič, Damir (2017) Ultrasound velocity measurement of calibration block no. 1 in accordance to the standard HRN EN ISO 2400. = Ultrasound velocity measurement of calibration block no. 1 in accordance to the standard HRN EN ISO 2400. In: MTECH international conference on materials, 04-07.10.2017., Zadar, Hrvatska.

Mihaljević, Morana and Markučič, Damir (2016) Procjena mjerne nesigurnosti ultrazvučnoga mjerenja debljine stijenke. = Measurement uncertainty estimation of the ultrasonic wall thickness measurements. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.

Stepanić, Josip and Markučič, Damir (2016) Uspostavljanje sustava osposobljavanja operatera bespilotnih letjelica. = Establishing a system for training the operators of unmanned aerial vehicles. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.

Markučič, Damir and Katić, Marko (2015) Comparison of x-ray vision systems. = Comparison of x-ray vision systems. In: 15. International scientific conference on production engineering, 10-13.06.2015., Vodice, Hrvatska.

Rakvin, Marko and Markučič, Damir and Dragojević, Andreja (2014) Application of Computed Radiography (CR) for characterization of historical documents. = Application of Computed Radiography (CR) for characterization of historical documents. In: 11th European Conference on Non-Destructive Testing (ECNDT 2014), 06-11.10.2014., Prag, Češka.

Rakvin, Marko and Markučič, Damir and Hižman, Boris (2014) Evaluation of pipe wall thickness based on contrast measurement using Computed Radiography (CR). = Evaluation of pipe wall thickness based on contrast measurement using Computed Radiography (CR). In: 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013, 23.-26.10.2013., Zadar, Hrvatska.

Barle, Jani and Franulović, Marina and Jurčević Lulić, Tanja and Kladarić, Ivica and Markučič, Damir and Radić, Gojmir (2014) Izrada kataloga znanja, vještina i kompetencija za studije strojarstva u Republici Hrvatskoj. = Development of catalogue of knowledge, skills and competences for mechanical engineering studies in Croatia. In: Međunarodna stručna konferencija ME4CataLOgue, 04-05.12.2014., Slavonski Brod, Hrvatska.

Medić, Srđan and Runje, Biserka and Groš, Josip and Markučič, Damir (2013) Implementacija zahtjeva norme ISO/TS 29001:2010 u hrvatske proizvodne tvrtke. = Implementation of ISO/TS 29001:2010 requirements in Croatian production companies. In: 13.hrvatska konferencija o kvaliteti i 4.znanstveni skup hrvatskog društva za kvalitetu, 09–11.05.2013., Brijuni, Hrvatska.

Markučič, Damir and Rakvin, Marko (2012) Analysis of computed radiography scanning parameters in NDT applications. = Analysis of computed radiography scanning parameters in NDT applications. In: Eurojoin 8, 24-26.05.2012., Pula, Hrvatska.

Mihaljević, Morana and Markučič, Damir and Stepanić, Josip (2010) Statistical analysis of ultrasonic reflector response. = Statistical analysis of ultrasonic reflector response. In: The 21ST DAAAM World Symposium, "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23.10.2010., Zadar; Croatia.

This list was generated on Tue Jul 16 18:18:19 2019 CEST.