Items where Division is "100 Department of Design > 120 Chair of Machine Elements" and Year is 2013

B

Bešlić, Josip (2013) Uređaj za savijanje cijevi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

C

Cesar, Filip (2013) Nosač solarnog fotonaponskog sustava. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

D

Domitran, Zoran (2013) Utjecaj odstupanja dimenzija na životni vijek polimernih zupčanika. = Investigation of dimensional tolerances on the polymer gear life. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.

H

Hoić, Matija and Herold, Zvonko and Kranjčević, Nenad and Deur, Joško and Ivanović, Vladimir (2013) Experimental characterization and modeling of dry dual clutch thermal expansion effects. = Experimental characterization and modeling of dry dual clutch thermal expansion effects. SAE International Journal of Passenger Cars - Mechanical Systems, 6 (2). pp. 775-785. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

K

Komes, Draženka and Belščak-Cvitanović, Ana and Domitran, Zoran and Opalić, Milan (2013) The content of saccharides, antioxidant and sensory properties of pear cultivar „Abate Fetel“ affected by ultrasound pre - treatment and air - drying duration. = The content of saccharides, antioxidant and sensory properties of pear cultivar „Abate Fetel“ affected by ultrasound pre - treatment and air - drying duration. Journal of food and nutrition research, 52 (4). pp. 239-250. ISSN 1336-8672. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.

Kondić, Živko and Kondić, Veljko and Kljajin, Milan and Opalić, Milan (2013) Environmental management systems in urban areas - process of ISO 14000 standards series implementation. = Environmental management systems in urban areas - process of ISO 14000 standards series implementation. In: 3rd International Conference "Ecology of Urban Areas 2013", 11.10.2013., Zrenjanin, Srbija.

Kranjčević, Nenad and Stegić, Milenko and Vranković, Nikola (2013) A novel algorithm for solving MDOF systems with clearances. = A novel algorithm for solving MDOF systems with clearances. In: The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13), 8-12.09.2013., Jeju, Južna Koreja.

Kranjčević, Nenad and Stegić, Milenko and Vukšić, Mario (2013) Loading of Pipeline Supports in a Micro-tunnel. = Loading of Pipeline Supports in a Micro-tunnel. Transactions of FAMENA, 37 (1). pp. 1-14. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

M

Milutinović, Milan and Kranjčević, Nenad and Deur, Joško (2013) Multi-mass dynamic model of a variable-length tether used in a high altitude wind energy system. = Multi-mass dynamic model of a variable-length tether used in a high altitude wind energy system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Muminović, Adil and Repčić, Nedžad and Žeželj, Dragan (2013) The efficiency of worm gears lubricated with oils of mineral and synthetic bases. = The efficiency of worm gears lubricated with oils of mineral and synthetic bases. Transactions of FAMENA, 37 (4). pp. 65-72. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

P

Pavković, Danijel and Kranjčević, Nenad and Kostelac, Milan (2013) Projektiranje sustava regulacije vertikalne sile tribometra s uzorkom na disku uključujući aktivno i pasivno prigušenje vertikalnih vibracija. = Design of normal force control system for a pin-on-disk tribometer including active and passive suppression of vertical vibrations. Automatika : časopis za automatiku, mjerenje, elektroniku, računarstvo i komunikacije, 54 (3). pp. 364-375. ISSN 0005-1144. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Perković, Luka and Silva, Pedro and Ban, Marko and Kranjčević, Nenad and Duić, Neven (2013) Harvesting high altitude wind energy for power production: The concept based on Magnus' effect. = Harvesting high altitude wind energy for power production: The concept based on Magnus' effect. Applied Energy, 101. pp. 151-160. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 5.

V

Vučković, Krešimir and Galić, Ivica and Čegec, Nikola (2013) Trajna dinamička čvrstoća korijena zuba zupčanika. = Spur gear tooth root fatigue strength. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.