Items where Division is "1000 Department of Materials > 1010 Chair of Materials and Tribology" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | F | G | H | I | J | K | L | M | N | P | R | S | T | V | Ć | Č | Š | Ž
Number of items: 82.

A

Agić, Filip (2010) Ispitivanje materijala vizira kaciga. = Testing the properties of helmet visor. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Alar, Vesna and Runje, Biserka and Alar, Željko (2010) Waste water treatment after removal of thermic oxides from stainless steel welding joints. = Waste water treatment after removal of thermic oxides from stainless steel welding joints. Scholarly Research Exchange Engineering, 3. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Alar, Željko and Franz, Mladen and Aleksandrov Fabijanić, Tamara (2010) Investigation of test force of reference hardness standard of Croatia. = Investigation of test force of reference hardness standard of Croatia. In: 21st Conference on Measurement of Force, Mass and Torque, 21.-25.11.2010., Pattaya; Thailand.

Alfier, Luka (2010) Utjecaj količine aditiva na reološke karakteristike Al2O3 suspenzije. = Influence of amount and type aditive on reological characteristics Al2O3 suspension. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Aluga, Ranko (2010) Ispitivanje žilavosti kompozitnih materijala. = Toughness testing of composite materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

B

Ban, Karlo (2010) Utjecaj površinskih slojeva na svojstva kovački zavarenih materijala. = Influence of surface layers on properties of forge welding joints. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Bujas, Krešimir (2010) Utjecaj količine aditiva na gustoću Al2O3 keramike. = Influence of amount and type of aditive on density of alumina ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

C

Cvrtila, Tomislav (2010) Određivanje Weibullovog modula pri ispitivanju tvrdoće aluminij oksidne keramike. = Determination of Weibullova modul for hardness of Al2O3 ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

F

Filetin, Tomislav (2010) Bending stiffness of aluminium foams. = Bending stiffness of aluminium foams. Rad Hrvatske akademije znanosti i umjetnosti. Tehničke znanosti, 506 (15). pp. 81-105. ISSN 1330-0822. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Filetin, Tomislav and Marić, Gojko and Alar, Željko (2010) Mechanical properties of aluminium foam after heat treatment and reinforcing. = Mechanical properties of aluminium foam after heat treatment and reinforcing. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Filetin, Tomislav and Šolić, Sanja and Jakovljević, Suzana (2010) Microhardness of the nacreous and prismatic seashell’s structures. = Microhardness of the nacreous and prismatic seashell’s structures. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Filetin, Tomislav and Žmak, Irena and Šolić, Sanja and Jakovljević, Suzana (2010) Microhardness of Mollusc Seashell Structures. = Microhardness of Mollusc Seashell Structures. In: International Conference on Innovative Technologies IN-TECH, 14-16.09.2010., Prag; Czech Republic.

Frušti, Josip (2010) Utjecaj mikrostrukture na mehanička svojstva aluminijske legure AlMgSi1. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

G

Grilec, Krešimir and Hrabrić, Ivan and Marić, Gojko (2010) Apsorpcija energije ojačanih aluminijskih pjena. = Energy Absorption of Reinforced Aluminium Foams. In: 1st International Conference Mechanical Technologies and Structural Materials, 21-22.10.2010., Split; Croatia.

Grilec, Krešimir and Jakovljević, Suzana and Prusac, Denis (2010) Erosion of ductile cast iron with quartz particles. = Erosion of ductile cast iron with quartz particles. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (1). pp. 17-22. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Grilec, Krešimir and Krapinec, Zvonimir (2010) Tlačno ispitivanje aluminijskih pjena različitim brzinama tlačenja. = Compression testing of aluminium foams with different displacement rate. In: Međunarodno savjetovanje o materijalima, tribologiji, recikliranju, 23-25.06.2010., Vela Luka; Croatia.

Grilec, Krešimir and Kumić, Ivan and Ćurković, Lidija and Baršić, Gorana (2010) The erosion of AIN ceramics by sand particles. = The erosion of AIN ceramics by sand particles. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Grilec, Krešimir and Marić, Gojko and Jakovljević, Suzana (2010) A study on energy absorption of aluminium foam. = A study on energy absorption of aluminium foam. Berg- und Huettenmaennische Monatshefte., 155 (5). pp. 231-234. ISSN 0005-8912. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

H

Hmura, Bruno (2010) Određivanje tvrdoće i lomne žilavosti SiC keramike. = Influence of surface roughness on mechanical properties of SiC ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Hrabrić, Ivan (2010) Apsorpcija energije ojačanih aluminijskih pjena. = Energy absorption of reinforced aluminium foams. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

I

Idek, Viktor (2010) Određivanje Vickersove tvrdoće tehničke keramike primjenom različitih sila utiskivanja. = Determination of Vickers hardness of technical ceramics applying different loads. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Ivanković, Hrvoje and Tkalčec, Emilija and Orlić, Sebastijan and Gallego Ferrer, Gloria and Schauperl, Zdravko (2010) Hydroxyapatite formation from cuttlefish bones: Kinetics. = Hydroxyapatite formation from cuttlefish bones: Kinetics. Journal of Materials Science: Materials in Medicine, 21 (10). pp. 2711-2722. ISSN 0957-4530. . .

J

Jakopčić, Mirko and Grilec, Krešimir (2010) Influence of artillery weapon barrel superheat on erosion wear resistance of material. = Influence of artillery weapon barrel superheat on erosion wear resistance of material. Transactions of FAMENA, 34 (2). pp. 27-36. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 2.

Jakopčić, Mirko and Grilec, Krešimir (2010) Influence on artillery weapon barrel superheat on abrasion wear resistance of material. = Influence on artillery weapon barrel superheat on abrasion wear resistance of material. In: Međunarodno savjetovanje o materijalima, tribologiji, recikliranju, 23-25.06.2010., Vela Luka; Croatia.

Jugović, Jelena (2010) Kemijska postojanost aluminij oksidne keramike u nitratnoj kiselini. = Chemical stability of alumina ceramics in nitric acid. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

K

Karačić, Iva (2010) Utjecaj precipitiranih faza na krhkost dupleks čelika. = Embrittling effect of intermetallic phases on duplex stainless steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Katalinić, Marko (2010) Osnivanje pomoćne brodice na napuhavanje s krutim prozirnim dnom. = Design of auxiliary inflatable boat with rigid transparent bottom. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana and Grubišić, Izvor.

Krajinović, Mario and Marić, Gojko (2010) Izrada polimernog kompozita ojačanog prirodnim vlaknima. = Construction of natural fiber reinforced polymer composite. In: 1st International Conference MTSM 2010, 21-22.10.2010., Split; Croatia.

Krapinec, Zvonimir (2010) Određivanje apsorpcije energije aluminijske pjene. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Križan, Ivan (2010) Karakterizacija sol-gel TiO2 filmova na staklenom supstratu. = Characterization of sol-gel TiO2 films on glass supstrate. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Kukmanović, Goran (2010) Ispitivanje mehaničkih i toplinskih svojstava folija za izradu polietilenskih vrećica. = Testing mechanical and thermal properties of films for production of polyethylene bags. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Kumić, Ivan and Grilec, Krešimir and Ćurković, Lidija (2010) Solid particle erosion of alumina ceramics at different impact angles. = Solid particle erosion of alumina ceramics at different impact angles. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Kumić, Ivan and Grilec, Krešimir and Ćurković, Lidija (2010) Solid particle erosion of alumina ceramics at different impact angles. = Solid particle erosion of alumina ceramics at different impact angles. In: International conference on materials, tribology, recycling, MATRIB 2010, Zagreb, Hrvatska.

L

Lalić, Marijo and Ćurković, Lidija (2010) Utjecaj sadržaja Darvana na reološke karakteristike 70%-tne Al2O3 suspenzije. = Influence of Darvan amount on rheological properties of 70% alumina suspension. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Ljubas, Davor and Ćurković, Lidija and Dobrović, Slaven (2010) Photocatalytic degradation of an AZO dye by UV irradiation at 254 and 365 nm. = Photocatalytic degradation of an AZO dye by UV irradiation at 254 and 365 nm. Transactions of FAMENA, 34 (1). pp. 19-28. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Ljubas, Davor and Ćurković, Lidija and Juretić, Hrvoje and Dobrović, Slaven and Šimara, Matija (2010) Photocatalytic behavior of sol-gel TiO2 films. = Photocatalytic behavior of sol-gel TiO2 films. In: International conference on materials, tribology, recycling, MATRIB 2110, 23-25.06.2010., Vela Luka; Croatia.

Lukač, Josip (2010) Mogućnosti ojačanja metalnih pjena. = Possibilities reinforcement of metal foams. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

M

Mak, Nikola (2010) Priprema i karakterizacija TiO2 sol-gel prevlaka. = Synthesis and characterization of sol-gel TiO2 coatings. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Marić, Gojko and Jančić, Marko (2010) Ponašanje pri savijanju toplinski obrađenih aluminijskih pjena. = Influence of heat treatment on bending resistance of aluminium foam. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Marković, Ivan (2010) Utjecaj količine i vrste aditiva na tvrdoću Al2O3 keramike. = Influence of amount and type of aditive on hardness of alumina ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Martinko, Matija (2010) Utjecaj količine i vrste aditiva na mikrostrukturu aluminij oksidne keramike. = Influence of amount and type of aditive on microstructure of alumina ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Mehulić, Ketij and Svetličić, Vesna and Vojvodić, Denis and Šegota, Suzana and Schauperl, Zdravko and Runje, Biserka (2010) Surface structural changes of feldspathic ceramics before and after immersion in corrosive medium using Atomic Force Microscopy. = Surface structural changes of feldspathic ceramics before and after immersion in corrosive medium using Atomic Force Microscopy. Materials Testing, 52 (4). pp. 234-240. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 6.

N

Nikl, Ivan (2010) Svojstva polimernog kompozita ojačanog prirodnim vlaknima. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

P

Pavlović, Nikola (2010) Korištenje apsorpcije energije aluminijske pjene kod zaštitno odbojnih ograda. = Energy absorption protective road barrier of aluminum foam. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 21st International DAAAM Symposium, 20-23.10.2010., Zadar; Croatia.

Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Nova Gorica; Slovenia.

R

Renjo, Robert (2010) Utjecaj predopterećenja na rezultate vlačnog umjeravanja kidalice. = Influence of preload on results of tensile calibration of testing machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko and Kodvanj, Janoš.

Rezić, Iva and Ćurković, Lidija and Ujević, Magdalena (2010) Simple methods for characterization of metals in historical textile threads. = Simple methods for characterization of metals in historical textile threads. Talanta, 82 (1). pp. 237-244. ISSN 0039-9140. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2010). Točan broj autora: 3.

Rezić, Iva and Ćurković, Lidija and Ujević, Magdalena (2010) Study of microstructure and corrosion kinetic of steel guitar strings in artificial sweat solution. = Study of microstructure and corrosion kinetic of steel guitar strings in artificial sweat solution. Materials and Corrosion, 61 (6). pp. 524-529. ISSN 0947-5117. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2010). Točan broj autora: 3.

Rolich, Tomislav and Rezić, Iva and Ćurković, Lidija (2010) Estimation of steel guitar strings corrosion by artificial neural network. = Estimation of steel guitar strings corrosion by artificial neural network. Corrosion Science, 52 (3). pp. 996-1002. ISSN 0010-938X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2010). Točan broj autora: 3.

Runje, Biserka and Baršić, Gorana and Alar, Željko (2010) Uncertainty estimation of coating thickness measurement results. = Uncertainty estimation of coating thickness measurement results. Materials Testing, 52 (3). pp. 182-186. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

S

Savić, Loreta (2010) Utjecaj usmjerenosti strukture dupleks čelika na rezultate mjerenja mikrotvrdoće. = Effect of directionality in duplex stainless steel structure on the result of microhardness measurement. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Schauperl, Zdravko and Šnajdar, Mateja (2010) Zbornik radova međunarodnog savjetovanja MATRIB 2010. = Proceedings of international conference MATRIB 2010. [Editorial Book]

Schauperl, Zdravko and Šnajdar, Mateja (2010) Zbornik sažetaka Međunarodnog savjetovanja MATRIB 2010. = Abstracts Book of International Conference MATRIB 2010. [Editorial Book]

Skorupski, Mario (2010) Analiza čestica trošenja metodom ferografije. = Ferrography analysis of wear particles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Sovulj, Ivan (2010) Karakterizacija materijala nehrđajućeg čelika. = Microstructural characterization of stainless steel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Staniša, Branko and Ćurković, Lidija and Schauperl, Zdravko (2010) Analiza istaloženih soli u protočnom dijelu parne turbine 210 MW. = Analysis of Deposited Salts in the Through-Flow Area of a 210 MW Steam Turbine. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Sušić, Aleksandar and Štorga, Mario and Majić, Marijana (2010) Ergonomic assessment in conceptual and embodiment design. = Ergonomic assessment in conceptual and embodiment design. In: 11th International Design Conference, DESIGN 2010, 17-20.05.2010., Dubrovnik; Croatia.

Sušić, Aleksandar and Štorga, Mario and Majić, Marijana (2010) Rapid ergonomic assessment methodology for engineering design. = Rapid ergonomic assessment methodology for engineering design. In: 4th International Ergonomics Conference, 30.06.-03.07.2010., Stubičke Toplice; Croatia.

T

Tolić, Ilija (2010) Utjecaj hrapavost površine na tvrdoću hladno izostatički oblikovane Al2O3 keramike. = Influence of roughness of cold isostatically pressed alumina ceramics on hardness. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

V

Vučić, Sven (2010) Ispitivanje utjecaja nagiba prijenosnog etalona sile pri tlačnom umjeravanju kidalice. = Investigation of the influence of force transducer position on results of testing machine compressive calibration. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Ć

Ćorić, Danko and Aleksandrov Fabijanić, Tamara and Trstenjak, Siniša (2010) Significance of preload in the testing machine calibration procedure. = Significance of preload in the testing machine calibration procedure. Transactions of FAMENA, 34 (2). pp. 59-70. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Ćorić, Danko and Franz, Mladen and Schauperl, Zdravko (2010) Istraživanje uzroka loma kuglaste slavine. = Investigation of Ball Valve Fracture. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Ćurković, Lidija (2010) Depth Profile Analysis of Ni-P coating by Glow Discharge Optical Emmission Specrometry. = Depth Profile Analysis of Ni-P coating by Glow Discharge Optical Emmission Specrometry. In: 10th International Foundrymen Conference-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Ćurković, Lidija and Ašperger, Danijela and Mutavdžić Pavlović, Dragana and Šnajdar, Mateja and Živković, Jadranka (2010) Characterization of folk instrument strings. = Characterization of folk instrument strings. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Ćurković, Lidija and Bakić, Ante and Kodvanj, Janoš and Haramina, Tatjana (2010) Flexural strength of alumina ceramics: Weibull analysis. = Flexural strength of alumina ceramics: Weibull analysis. Transactions of FAMENA, 34 (1). pp. 13-18. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 4.

Ćurković, Lidija and Kumić, Ivan and Grilec, Krešimir (2010) SEM analysis of erosion mehanisms of alumina ceramics. = SEM analysis of erosion mehanisms of alumina ceramics. In: 42nd International October Conference on Mining and Metallurgy, 10-13.10.2010., Kladovo; Serbia.

Ćurković, Lidija and Ljubas, Davor (2010) Photoactivity of Suspended and Immobilized P-25 TiO2 Nanoparticles on Example of Diazo Congo Red dye Degradation. = Photoactivity of Suspended and Immobilized P-25 TiO2 Nanoparticles on Example of Diazo Congo Red dye Degradation. In: Handbook of Research on Chemoinformatics & Chemical Engineering. Chemical Engineering Methods and Technology . Nova Science Publishers, New York, pp. 9-25. ISBN 978-1-61668-504-1

Ćurković, Lidija and Ljubas, Davor and Juretić, Hrvoje (2010) Photocatalytic decolorization kinetics of diazo dye Congo red aqueous solution by UV/TiO2 nanoparticles. = Photocatalytic decolorization kinetics of diazo dye Congo red aqueous solution by UV/TiO2 nanoparticles. Reaction Kinetics, Mechanisms and Catalysis, 99 (1). pp. 201-208. ISSN 1878-5190. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Ćurković, Lidija and Ljubas, Davor and Marinović, Veronika (2010) Characterization of TiO2 films prepared by sol-gel method. = Characterization of TiO2 films prepared by sol-gel method. In: 42nd International October Conference on Mining and Metallurgy, 10-13.10.2010., Kladovo; Serbia.

Ćurković, Lidija and Rede, Vera and Grilec, Krešimir (2010) Utjecaj opterećenja na izmjerenu tvrdoću silicijeve karbidne keramike. = Indentation size effect on the hardness of silicon carbide ceramics. Kemija u industriji/Journal of Chemists and Chemical Engineers, 59 (10). pp. 483-488. ISSN 0022-9830. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Ćurković, Lidija and Rezić, Iva (2010) Characterization and monitoring of dissolution of metal strings. = Characterization and monitoring of dissolution of metal strings. In: Handbook of Research on Chemoinformatics & Chemical Engineering. Chemical Engineering Methods and Technology . Nova Science Publishers, New York, pp. 27-38. ISBN 978-1-61668-504-1

Ćurković, Lidija and Ćorić, Danko (2010) Load dependence of knoop hardness for SiC ceramics. = Load dependence of knoop hardness for SiC ceramics. In: 42nd International October Conference on Mining and Metallurgy, 10-13.10.2010., Kladovo; Serbia.

Ćurković, Lidija and Ćorić, Danko (2010) Load dependence of knoop hardness for sic ceramics. = Load dependence of knoop hardness for sic ceramics. In: 42nd International October Conference on Mining and Metallurgy, Kladovo, Srbija.

Ćurković, Lidija and Ćorić, Danko (2010) Load dependence of knoop hardness for sic ceramics. = Load dependence of knoop hardness for sic ceramics. In: 42nd International October Conference on Mining and Metallurgy, 10-13.10.2010., Kladovo, Srbija.

Ćurković, Lidija and Šegota, Suzana and Ljubas, Davor and Svetličić, Vesna (2010) Preparation and characterization of sol-gel TiO2 films by Atomic Force Microscopy. = Preparation and characterization of sol-gel TiO2 films by Atomic Force Microscopy. In: International conference on materials, tribology, recycling, MATRIB 2110, 23-25.06.2010., Vela Luka; Croatia.

Č

Čatić, Igor and Barić, Gordana and Haramina, Tatjana and Rujnić-Sokele, Maja (2010) Od kugle do svemira - Plastika i guma u suvremenom svijetu. = From ball to space - plastics and rubber in modern world. Katalog izložbe Od kugle do svemira - Plastika i guma u suvremenom svijetu. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4. (In Press)

Š

Šajnović, Željko (2010) Utjecaj veličine otiska na Knoopovu tvrdoću SiC keramike. = Indentation size effect on Knoop hardness of SiC ceramics. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Šimičić, Marko (2010) Svojstva polimernog kompozita s ojačalima od prirodnih vlakana. = The properties of polymer composites with reinforcement of natural fibers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Šupica, Saša (2010) Otpornost na abrazijsko trošenje poliuretana i polivinil acetata. = Abrasion resistance of polyurethane and polyvinyl acetate. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Ž

Žmak, Irena and Filetin, Tomislav (2010) Predicting thermal conductivity of steels using artificial neural networks. = Predicting thermal conductivity of steels using artificial neural networks. Transactions of FAMENA, 34 (3). pp. 11-20. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 2.

Žmak, Irena and Ćurković, Lidija and Filetin, Tomislav (2010) The use of artificial neural network (ANN) for prediction of removal of Co2+ and Ni2+ ions from waste water by electric furnace slag. = The use of artificial neural network (ANN) for prediction of removal of Co2+ and Ni2+ ions from waste water by electric furnace slag. In: 69th World Foundry Congress 2010, WFC 2010, 16-20.10.2010., Hangzhou; China.

This list was generated on Wed Feb 21 05:33:25 2024 CET.