Items where Division is "1000 Department of Materials > 1010 Chair of Materials and Tribology" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | F | G | H | I | J | K | L | M | P | R | S | T | Ć | Š | Ž
Number of items: 60.

A

Aleksandrov Fabijanić, Tamara and Alar, Željko and Franz, Mladen and Ćorić, Danko (2011) Investigation of the reference hardness block quality. = Investigation of the reference hardness block quality. In: INTERNATIONAL CONFERENCE MATRIB 2011., 29.06-01.07.2011, Vela Luka, Korčula.

B

Bišćan, Marija (2011) Ispitivanje zrakoplovnih sendvič materijala prema ASTM C365-03. = Testing of sandwich cores according to ASTM C365-03. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Bolanča, Tomislav and Ukić, Šime and Ćurković, Lidija and Šiljeg, Mario (2011) Removal of Iron Ions Form Water by Using Clinoptilolite - Rich Rock and its Na - Enriched Form: a Kinetic Approach. = Removal of Iron Ions Form Water by Using Clinoptilolite - Rich Rock and its Na - Enriched Form: a Kinetic Approach. In: CET 2011 - World Congress on Engineering and Technology, Šangaj, Kina.

Brkić, Antonija (2011) Izbor materijala u petrokemijskoj industriji. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Bukovčan, Marko (2011) Termovizijsko praćenje stanja tribosustava. = Thermovision condition monitoring of tribosystem. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

C

Carek, Andreja and Živko-Babić, Jasenka and Schauperl, Zdravko and Badel, Tomislav (2011) Mechanical Properties of Co-Cr Alloys for Metal Base Framework. = Mechanical Properties of Co-Cr Alloys for Metal Base Framework. International Journal of Prosthodontics and Restoratve Dentistry, 1 (1). pp. 13-19. ISSN 2231-6361. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

D

Dananić, Mario (2011) Analiza strukture i svojstva kompozita staklena vlakna-epoksidna smola. = Structure and properties of E glass fibers - epoxy composites. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Domazet, Goran (2011) Smanjenje umora površine zupčanika izborom odgovarajućeg ulja. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Dragojević, Roman (2011) Ojačane metalne pjene. = Reinforced metal foams. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Drezga, Danijel (2011) Utjecaj temperature na mehanička svojstva sendvič kompozita. = Influence of temperature on mechanical properties of sandwich composites. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

F

Filetin, Tomislav (2011) Put ka hrvatskom industrijskom identitetu utemeljenom na vlastitim resursima i potencijalima. = A way towards the Croatian industrial identity based on own resources and potentials. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (3). pp. 411-416. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .

G

Gašparić, Ksenija (2011) Svojstva drvno polimernog kompozita. = Properties of wood polymer composite. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Grbec, Vladimir (2011) Utjecaj kvalitete etalonskih pločica na umjeravanje tvrdomjera. = The influence of the hardness blocks quality on calibration of hardness testing machines. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Franz, Mladen.

Grilec, Krešimir and Hrabrić, Ivan and Marić, Gojko (2011) Energy absorption of reinforced aluminium foams. = Energy absorption of reinforced aluminium foams. Strojarstvo, 53 (4). pp. 259-264. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .

Grilec, Krešimir and Ćurković, Lidija and Kumić, Ivan and Baršić, Gorana (2011) Erosion mechanisms of aluminium nitride ceramics at different impact angles. = Erosion mechanisms of aluminium nitride ceramics at different impact angles. Materialwissenschaft und Werkstofftechnik, 42 (8). pp. 712-717. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .

H

Haramina, Tatjana and Jelavić, Tomislav and Šolić, Tomislav and Katalinić, Marko and Pilipović, Ana (2011) Analiza mogućnosti recikliranja diskontinuiranih E-staklenih vlakana. = Analysis of recycling possibilities of discontinuous E-glass fibres. Polimeri : časopis za plastiku i gumu, 32 (2). pp. 52-61. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Haramina, Tatjana and Pilipović, Ana and Jelavić, Tomislav and Šolić, Tomislav (2011) Recikliranje otpada od diskontinuiranih E-staklenih vlakana u građevinskim materijalima. = Recycling of discontinuous E-glass fibers in construction materials. In: International conference on materials, tribology, recycling, 29.06 - 01.07.2011., Vela Luka, Hrvatska.

I

Ilić, Marko and Schauperl, Zdravko and Šolić, Sanja (2011) Karakterizacija izotermički poboljšanog nodularnog lijeva. = Characterization of austempered ductile iron. In: Međunarodno savjetovanje MATRIB 2011, materijali, tribologija, recikliranje, Vela Luka, Hrvatska.

Ivanec, Tomislav (2011) Svojstva kompozita na bazi poli(oksimetilena) ojačanog recikliranim staklenim vlaknima. = Properties of poly(oxymethylene) based composite with recycled glass fibers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Ivaniš, Davor (2011) Karakterizacija prevlaka dobivenih HVOF postupkom. = Characterisation of HVOF coatings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Ivaniš, Davor and Schauperl, Zdravko and Šolić, Sanja (2011) Otpornost na trošenje prevlaka dobivenih HVOF postupkom. = Wear resistance of HVOF coatings. In: Međunarodno savjetovanje MATRIB 2011, materijali, tribologija, recikliranje, Vela Luka, Hrvatska.

Ivanišević, Marko (2011) Trendovi razvoja industrije polimera u Republici Hrvatskoj. = Developement trends in the Croatian plastics industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Španiček, Đurđica.

Ivušić, Vinko and Franz, Mladen and Španiček, Đurđica and Ćurković, Lidija (2011) Materijali I. = Materials I. Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-11-2 (Unpublished)

J

Jakopčić, Mirko and Grilec, Krešimir (2011) Utjecaj pregrijavanja cijevi topničkog oružja na otpornost prema abrazijskom trošenju materijala. = Influence of artillery weapon barrel superheat on abrasion wear resistance of material. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2). pp. 173-177. ISSN 1330-3651. Kvartili JCR: Q4 (2011). .

K

Kasupović, Enes (2011) Utvrđivanje otpornosti na umor površine. = Surface fatigue resistance. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Keser, Matej (2011) Tlačno ispitivanje ojačanih aluminijskih pjena. = Compression testing of reinforced aluminium foams. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Kostanjevec, Marija and Sajko, Dino and Rede, Vera and Ćurković, Lidija (2011) Kemijska postojanost keramičkih dimovodnih cijevi. = Chemical stability of ceramics chimney flue pipes. In: MATRIB 2011, 29.06.-01.07.2011., Vela Luka, Hrvatska.

Krajinović, Mario (2011) Mehanička svojstva aluminij oksidne keramike. = Mechanical properties of alumina ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Krajinović, Mario and Marić, Gojko and Šnajdar, Mateja (2011) Design of natural fiber reinforced polymer composite. = Design of natural fiber reinforced polymer composite. Strojarstvo, 53 (4). pp. 265-270. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .

Krsnik, Bojan (2011) Utjecaj veličine erozivnih čestica na erozijsku otpornost aluminij oksidne keramike. = Influence of erosive particles size on erosion resistance of alumina ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Kurajica, Stanislav and Tkalčec, Emilija and Matijašić, Gordana and Ćurković, Lidija and Schauperl, Zdravko and Šipušić, Juraj and Mandić, Vilko (2011) Influence of agglomeration and contamination in the course of amorphous powder grinding on structure and microstructure of sintered mullite. = Influence of agglomeration and contamination in the course of amorphous powder grinding on structure and microstructure of sintered mullite. Croatica Chemica Acta, 84 (1). pp. 63-71. ISSN 0011-1643. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .

L

Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Lübben, Thomas (2011) End-quench hardenability test for gas quenched steels. = End-quench hardenability test for gas quenched steels. Strojarstvo, 53 (1). pp. 33-37. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .

Landek, Darko and Župan, Josip and Filetin, Tomislav (2011) Systematical analysis of cooling curves for liquid quenchants. = Systematical analysis of cooling curves for liquid quenchants. In: The IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.

M

Majić, Marijana and Mulabdić, Alen and Ćurković, Lidija (2011) Analiza energetske bilance pri mjerenju knoopove tvrdoće aluminij oksidne keramike. = An energy - balance analysis of the alumina ceramics knoop hardness testing. In: MATRIB 2011, Vela Luka, Hrvatska.

Majić, Marijana and Ćurković, Lidija and Ćorić, Danko (2011) Load dependence of the apparent Knoop hardness of SiC ceramics in a wide range of loads. = Load dependence of the apparent Knoop hardness of SiC ceramics in a wide range of loads. Materialwissenschaft und Werkstofftechnik, 42 (3). pp. 234-238. ISSN 0933-5137. . .

Matijević, Božidar and Ćurković, Lidija and Rede, Vera (2011) Characterisation and determination of Ni-P coating sputtering rate. = Characterisation and determination of Ni-P coating sputtering rate. International Journal of Microstructure and Materials Properties, 6 (6). pp. 479-485. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Matijević, Božidar and Ćurković, Lidija and Rede, Vera (2011) Characterization and determination of Ni-P coating sputtering rate. = Characterization and determination of Ni - P coating sputtering rate. International Journal of Microstructure and Materials Properties, 6 (6). pp. 479-485. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2011) Properties of different compositions of oils as quenchants. = Properties of different compositions of oils as quenchants. In: IFHTSE Congress (19 ; 2011), 17.-20.10.2011., Glasgow, Škotska.

Meštrović, Krešimir (2011) Ispitivanje simetičnosti opterećenja etalona sile. = Testing the symmetry of the load of the reference force standard. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Milinović, Andrijana and Grilec, Krešimir and Glavaš, Danko and Marušić, Vlatko (2011) Tribološki pristup problemu oštećivanja cijevi u kotlovima loženim komunalnim otpadom. = Tribological approach to the problem of damaging of pipes in communal waste fired boilers. In: International conference Matrib 2011., Vela Luka, Hrvatska.

Mišur, Ivo (2011) Iskoristivost apsorpcije energije aluminijskih pjena. = Efficiency of energy absorption of aliminium foams. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Mulabdić, Alen (2011) Analiza utjecaja opterećenja na Knoopovu tvrdoću aluminij oksidne keramike. = Analysis of indentation size effect on Knoop hardness of alumina ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Muža, Marko (2011) Ispitivanje zrakoplovnih sendvič materijala prema ASTM C364-99. = Testing of sandwich cores according to ASTM C364-99. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

P

Pedišić, Ljiljana and Ćurković, Lidija and Ciglar, Damir and Matijašić, Gordana (2011) Characterization of the cooling liquid after the machining of alumina ceramics. = Characterization of the cooling liquid after the machining of alumina ceramics. In: Computer integrated manufacturing and high speed machining, 16-18.06.2011., Biograd, Hrvatska.

Pedišić, Ljiljana and Ćurković, Lidija and Matijašić, Gordana and Sladojević, Milan (2011) Characterization of the cooling liquid after the machining of Si and SiO2. = Characterization of the cooling liquid after the machining of Si and SiO2. Transactions of FAMENA, 35 (1). pp. 75-82. ISSN 1333-1124. Vrsta rada: Original scientific paper. Kvartili JCR: Q4 (2011). .

Previšić, Pero and Grilec, Krešimir and Jakovljević, Suzana (2011) Iskoristivost apsorpcije energije aluminijskih pjena. = Efficiency of energy absorption of aluminium foams. In: International conference on materials, tribology and recycling, Vela Luka, Hrvatska.

R

Raos, Marko (2011) Svojstva kompozita na osnovi polietilena visoke gustoće ojačanog recikliranim staklenim vlaknima. = Properties of high density polyethilene based composites with recycled glass fibers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

S

Salopek, Sara (2011) Utjecaj polivinil alkohola na reološke karakteristike koloidnih Al2O3 suspenzija. = Effect of polyvinyl alcohol on rheology characteristics of colloidal alumina suspensions. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Salopek, Sara and Ćurković, Lidija and Šegota, Suzana (2011) Analiza sol - gel TiO2 prevlaka na čeličnoj podlozi mikroskopijom atomskih sila. = Atomic force microscopy analysis of sol - gel TiO2 coatings deposited on steel substrate. In: MATRIB 2011, Vela Luka, Hrvatska.

Savić, Loreta (2011) Utjecaj opterećenja na tvrdoću dupleks čelika. = Load effect on the hardness of a duplex steel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Skorupski, Mario (2011) Primjena aluminijske pjene za izradu ploča sustava grijanja i hlađenja. = Heating and cooling panels made of aluminium foam. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Stojanović, Miroslav (2011) Ispitivanje zrakoplovnih sendvič materijala prema ASTM C393-00. = Testing of sandwich cores according to ASTM C 393-00. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

T

Tkalec, Andrija (2011) Analiza trošenja kliznog tribo para zub - zubna udlaga. = Analysis of the wear of sliding tribo pair of teeth - dental splint. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Ć

Ćurković, Lidija and Kumić, Ivan and Grilec, Krešimir (2011) Solid particle erosion behaviour of high purity alumina ceramics. = Solid particle erosion behaviour of high purity alumina ceramics. Ceramics International, 37 (1). pp. 29-35. ISSN 0272-8842. . .

Ćurković, Lidija and Rastovčan-Mioč, Alenka and Majić Renjo, Marijana and Župan, Josip (2011) Application of different isotherm models on lead ions sorption onto electric furnace slag. = Application of different isotherm models on lead ions sorption onto electric furnace slag. THE HOLISTIC APPROACH TO ENVIRONMENT, 1 (1). pp. 13-18. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Ćurković, Lidija and Rede, Vera and Lalić, Marijo (2011) Statistical analysis of fracture toughness of SiC ceramics determined by Vickers indentation method. = Statistical analysis of fracture toughness of SiC ceramics determined by Vickers indentation method. International Journal of Microstructure and Materials Properties, 6 (5). pp. 359-365. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Ćurković, Lidija and Trgo, Marina and Rožić, Mirela and Vukojević Medvidović, Nediljka (2011) Kinetics and thermodynamics study of copper ions removal by natura clinoptilolite. = Kinetics and thermodynamics study of copper ions removal by natura clinoptilolite. Indian journal of chemical technology, 18 (2). pp. 137-143. ISSN 0971-457X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Ćurković, Lidija and Trgo, Marina and Rožić, Mirela and Vukojević Medvidović, Nediljka (2011) Kinetics and thermodynamics study of copper ions removal by natural clinoptilolite. = Kinetics and thermodynamics study of copper ions removal by natural clinoptilolite. Indian Journal of Chemical Technology, 18 (2). pp. 137-144. ISSN 0971-457X. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .

Š

Šegota, Suzana and Ćurković, Lidija and Ljubas, Davor and Svetličić, Vesna and Fiamengo Houra, Ivona and Tomašić, Nenad (2011) Synthesis, characterization and photocatalytic properties of sol-gel TiO2 films. = Synthesis, characterization and photocatalytic properties of sol-gel TiO2 films. Ceramics International, 37 (4). pp. 1153-1160. ISSN 0272-8842. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 6.

Ž

Župan, Josip and Filetin, Tomislav and Landek, Darko (2011) Cooling characteristics of the water based nanofluids in quenching. = Cooling characteristics of the water based nanofluids in quenching. In: International Conference MATRIB 2011. : Materials/tribology/Recycling, Vela Luka, Hrvatska.

This list was generated on Wed Feb 21 22:58:03 2024 CET.