Items where Division is "1000 Department of Materials > 1010 Chair of Materials and Tribology" and Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | D | G | H | J | L | M | O | P | R | S | T | Ć | Š | Ž
Number of items: 45.

A

Alar, Vesna and Baršić, Gorana and Runje, Biserka and Alar, Željko (2012) The influence of the surface finishing on the electrochemical behaviour of austenitic and superaustenitic steels. = The influence of the surface finishing on the electrochemical behaviour of austenitic and superaustenitic steels. Materialwissenschaft und Werkstofftechnik, 43 (8). pp. 725-732. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 4.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Franz, Mladen (2012) Developement of reference vickers hardness blocks by the powder metallurgy process. = Developement of reference vickers hardness blocks by the powder metallurgy process. In: 20th IMEKO World Congress 2012, 9-14.10. 2012., Busan; South Korea.

Andrić, Ivana and Majić Renjo, Marijana and Ćurković, Lidija (2012) Priprava stabilne suspenzije za lijevanje kompozitne keramike. = Preparation of stable suspensions for slip casting of composite ceramics. In: International conference MATRIB 2012 "Materials, tribology, recycling", Vela Luka, Hrvatska.

D

Duić, Neven and Haramina, Tatjana and Perković, Luka (2012) High Altitude Wind Energy - HAWE Deliverable 10.3: Materials Selection and Aerodynamic Studies Report. = High Altitude Wind Energy - HAWE Deliverable 10.3: Materials Selection and Aerodynamic Studies Report. HAWE project web pages / deliverables. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3. (In Press)

G

Grilec, Krešimir and Bojanić, Vedran (2012) Ponovljivost ispitivanja svojstava apsorpcije energije aluminijske pjene. = Reproducibility of energy absorption properties of aluminium foams. Tehnički glasnik, 6 (2). pp. 183-186. ISSN 1846-6168. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Grilec, Krešimir and Bojanić, Vedran (2012) Reproducibility of aluminum foams energy absorption. = Reproducibility of aluminum foams energy absorption. In: 12th International foundrymen conference, Opatija, Hrvatska.

Grilec, Krešimir and Marić, Gojko and Miloš, Katica (2012) Aluminijske pjene u izgradnji prometnih sredstava. = Aluminium foams in the design of transport means. Promet-Traffic & Transportation, 24 (4). pp. 295-304. ISSN 0353-5320. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.

H

Henč-Brtolić, Višnja and Bočina, Tonica and Jakovljević, Suzana and Orhanović, Iva and Zpanič, Franc (2012) Damage caused by nanosecond UV laser on a previously heated metallic surface. = Damage caused by nanosecond UV laser on a previously heated metallic surface. In: Croatian Microscopy Symposium, 16-17.11.2012., Pula, Hrvatska.

Horvat, Siniša (2012) Metalne pjene kao zaštita protiv eksplozije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Husajina, Ivan (2012) Otpornost na abrazijsku eroziju duboko hlađenog izotermički poboljšanog nodularnog lijeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

J

Jakopčić, Mirko and Grilec, Krešimir and Lisjak, Dragutin (2012) Istraživanje utjecaja kemijskog sastava materijala na tvrdoću cijevi topničkih oružja. = Investigation of the material chemical composition influence on artillery weapons barrel hardness. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (4). pp. 893-898. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.

Jelavić, Tomislav and Haramina, Tatjana and Pilipović, Ana and Bleiziffer, Jelena (2012) Impact of recycling discontinuous E-glass fibres on building material properties. = Impact of recycling discontinuous E-glass fibres on building material properties. In: 8th Central European Congress on Concrete Engineering, Durability of Concrete Structures, 04.-06.10.2012., Plitvice, Hrvatska.

Jug, Vanja (2012) Transmitancija sol - gel TiO2 filmova. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

L

Landek, Darko and Župan, Josip and Filetin, Tomislav (2012) Systematic analysis of cooling curves for liquid quenchants. = Systematic analysis of cooling curves for liquid quenchants. International Heat Treatment and Surface Engineering, 6 (2). pp. 51-55. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Lisjak, Dragutin and Marić, Gojko and Štefanić, Nedeljko (2012) Istraživanje mogućnosti primjene neuronske mreže u dijagnostici četverotaktnog benzinskog motora pomoću sadržaja čestica trošenja. = Studying the possibility of neural network application in the diagnostics of a small four-stroke petrol engine by wear particle content. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (4). pp. 857-862. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.

Liščić, Božidar and Filetin, Tomislav (2012) Measurement of Quenching Intensity, Calculation of Heat Transfer Coefficient and Global Database of Liquid Quenchants. = Measurement of Quenching Intensity, Calculation of Heat Transfer Coefficient and Global Database of Liquid Quenchants. Materiálové inžinierstvo, 19 (2). pp. 52-63. ISSN 1335-0803. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

M

Majić, Marijana and Ćurković, Lidija (2012) Fracture toughness of alumina ceramics determined by vickers indentation technique. = Fracture toughness of alumina ceramics determined by vickers indentation technique. Materialpruefung/Materials Testing, 54 (4). pp. 228-232. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 2.

Majić Renjo, Marijana and Lalić, Marijo and Ćurković, Lidija and Matijašić, Gordana (2012) Rheological properties of aqueous alumina suspensions. = Rheological properties of aqueous alumina suspensions. Materialwissenschaft und Werkstofftechnik, 43 (11). pp. 979-983. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 4.

Majić Renjo, Marijana and Ćurković, Lidija and Andrić, Ivana (2012) Preparation of stable suspensions for slip casting of alumina - zirconia composite. = Preparation of stable suspensions for slip casting of alumina - zirconia composite. In: International Scientific and Expert Conference "Technique, Education, Agriculture & Management" (4 ; 2012), 17.-19.10.2012., Slavonski Brod, Hrvatska.

Majić Renjo, Marijana and Župetić, Renata and Ćurković, Lidija (2012) Ispitivanje stabilnosti al2o3 suspenzija sedimentacijskim testovima. = In: Interantional Conference on Materials, Tribology, Recycling, Vela Luka, Hrvatska.

Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2012) Effect of composition on oil quenchant performance. = Effect of composition on oil quenchant performance. International Heat Treatment and Surface Engineering, 6 (1). pp. 15-18. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2012) Properties of different compositions of oils as quenchants. = Properties of different compositions of oils as quenchants. International Heat Treatment and Surface Engineering, 6 (1). pp. 15-18. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Mioč, Boro and Rede, Vera and Mikec, Matija and Ćurković, Lidija (2012) Mikrostrukturne promjene aluminiziranog austenitnog nehrđajućeg čelika. = Microstructure changes of aluminized austenitic stainless steel. In: Interantional Conference on Materials, Tribology, Recycling, Vela Luka, Hrvatska.

O

Očić, Anđelko and Haramina, Tatjana (2012) Promjena mehaničkih svojstava procesom starenja polimernih tkanina otpornih na cijepanje i trganje. = Effect of aging on mechanical properties of polymeric ripstop fabrics. Polimeri : časopis za plastiku i gumu, 33 (3-4). pp. 118-123. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

P

Panjan, Peter and Čekada, Miha and Panjan, Matjaž and Kek-Merl, Darja and Zupanič, Franc and Ćurković, Lidija and Paskvale, Srečko (2012) Surface density of growth defects in different PVD hard coatings prepared by sputtering. = Surface density of growth defects in different PVD hard coatings prepared by sputtering. Vacuum, 86 (6). pp. 794-798. ISSN 0042-207X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 7.

R

Rede, Vera (2012) Mikrostrukturne promjene u zavarenom spoju dupleks čelika. = Microstructural changes in duplex steels joint. Zavarivanje, 55. pp. 155-163. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Rede, Vera and Mioč, Boro and Ćurković, Lidija and Majić Renjo, Marijana (2012) Synthesis and characterization of pack cemented aluminide coating on stainless steel. = Synthesis and characterization of pack cemented aluminide coating on stainless steel. In: International Scientific and Expert Conference "Technique, Education, Agriculture & Management" (4 ; 2012), 17.-19.10.2012., Slavonski Brod, Hrvatska.

Rede, Vera and Žmak, Irena (2012) Analiza osnovne mikrostrukture i mikrostrukturnih promjena u dupleks - čeliku. = Analysis of microstructure and microstructural changes in duplex steels. In: 12th International Foundrymen Conference, 24-25.05.2012., Opatija, Hrvatska.

Runje, Biserka and Medić, Srđan and Kondić, Živko and Alar, Željko and Tunjić, Đuro (2012) Statistička kontrola debljine protupožarnog premaza. = Statistical process control of fire-resistant coating production based on thickness measurements. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (3). pp. 589-593. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 5.

S

Schauperl, Zdravko and Kožuh, Zoran and Kralj, Slobodan and Šnajdar, Mateja and Glogović, Zlatko (2012) Structural transformation of steel induced by application of oxyfuel gas cutting using acetylene and propane/butane mixture. = Structural transformation of steel induced by application of oxyfuel gas cutting using acetylene and propane/butane mixture. In: 12th International Foundrymen Conference, Opatija, Hrvatska.

Schauperl, Zdravko and Nikšić, Mladen and Kolednjak, Davor (2012) Utjecaj vrste goriva na stanje motora s unutrašnjim izgaranjem. = Impact of fuel type on the internal combustion engine condition. Promet-Traffic & Transportation, 24 (4). pp. 285-293. ISSN 0353-5320. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). .

Staniša, Branko and Schauperl, Zdravko and Šnajdar, Mateja (2012) Erosion process of 66 MW steam turbine rotor blades. = Erosion process of 66 MW steam turbine rotor blades. Materials Testing, 54. pp. 157-162. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

T

Trkmić, Marija and Ćurković, Lidija and Ašperger, Danijela (2012) Chemical analysis of solid residue from liquid and solid fuel combustion: Method development and validation. = Chemical analysis of solid residue from liquid and solid fuel combustion: Method development and validation. Materialwissenschaft und Werkstofftechnik, 43 (6). pp. 503-510. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.

Trkmić, Marija and Ćurković, Lidija and Ašperger, Danijela and Schauperl, Zdravko (2012) Kemijska i morfološka analiza pepela različitih vrsta krutog goriva. = Morphology and composition of the ash of various solid fuels. In: Interantional Conference on Materials, Tribology, Recycling, 20-22.06.2012., Vela Luka, Hrvatska.

Ć

Ćorić, Danko and Filetin, Tomislav (2012) Materijali u zrakoplovstvu. = Aerospace Materials. Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, Zagreb, -. ISBN 978-953-7738-18-1 (Unpublished)

Ćorić, Danko and Franz, Mladen (2012) Behavior of thermo - mechanically treated CuZnAl - SMA. = Behavior of thermo - mechanically treated CuZnAl - SMA. Tehnicki Vjesnik-Technical Gazette, 19 (3). pp. 595-600. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Ćorić, Danko and Franz, Mladen (2012) Ponašanje termomehanički obrađene CuZnAl-SEPO. = Behaviour of thermo-mechanically treated CuZnAl-SMA. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (3). pp. 595-600. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 2.

Ćurković, Lidija and Ljubas, Davor (2012) Photoactivity of suspended and immobilized P-25 TiO2 nanoparticles on example of diazo congo red dye degradation. = Photoactivity of suspended and immobilized P-25 TiO2 nanoparticles on example of diazo congo red dye degradation. In: Handbook of research on chemoinformatics and chemical engineering. Nova Science Publishers, Inc., New York, pp. 9-25. ISBN 978-162100998-6

Ćurković, Lidija and Otmačić-Ćurković, Helena and Salopek, Sara and Majić Renjo, Marijana (2012) Poboljšanje korozijske postojanosti nehrđajućeg čelika nanostrukturiranim sol - gel TiO2 filmovima. = Improvement in corrosion resistance of stainless steel by means of nanostructured sol - gel TiO2 films. In: Interantional Conference on Materials, Tribology, Recycling, 20.-22.06.2012., Vela Luka, Hrvatska.

Ćurković, Lidija and Rezić, Iva (2012) Characterization and monitoring of dissolution of metal strings. = Characterization and monitoring of dissolution of metal strings. In: Handbook of research on chemoinformatics and chemical engineering. Nova Science Publishers, Inc., New York, pp. 27-38. ISBN 978-162100998-6

Ćurković, Lidija and Salopek, Sara and Majić Renjo, Marijana and Šegota, Suzana (2012) Morphology of nanostructured sol – gel TiO2 films on stainless steel. = Morphology of nanostructured sol – gel TiO2 films on stainless steel. In: International Scientific and Expert Conference "Technique, Education, Agriculture & Management" (4 ; 2012), Slavonski Brod, Hrvatska.

Ćurković, Lidija and Salopek, Sara and Majić Renjo, Marijana and Šegota, Suzana (2012) Preparation and characterization of nanostructured sol - gel TiO2 coatings on stainless steel. = Preparation and characterization of nanostructured sol - gel TiO2 coatings on stainless steel. In: International Foundrymen Conference Sustainble Development in Foundry Materials and Technologies (12 ; 2012), 24.-25.05.2012., Opatija, Hrvatska.

Š

Šolić, Sanja and Jakovljević, Suzana (2012) Utjecaj dubokog hlađenja na svojstva izotermički poboljšanog nodularnog lijeva. = Influence of deep cryogenic treatment on properties of ADI. In: 8th European Conference EUROJOIN 8, on welding, joining and cutting, 24. - 26. 05. 2012., Pula, Hrvatska.

Ž

Župan, Josip and Filetin, Tomislav and Landek, Darko (2012) The effect of TiO2 nanoparticles on fluid quenching characteristics. = The effect of TiO2 nanoparticles on fluid quenching characteristics. International Heat Treatment and Surface Engineering, 6 (2). pp. 56-60. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Župan, Josip and Filetin, Tomislav and Žmak, Irena (2012) Enhancement of heat transfer characteristics of liquid quenchants. = Enhancement of heat transfer characteristics of liquid quenchants. In: 6th International Quenching and Control of Distortion Conference: Quenching Control and Distortion, 09-13.09.2012., Chicago, IL; United States.

This list was generated on Wed Feb 21 02:07:49 2024 CET.