Items where Division is "1000 Department of Materials > 1010 Chair of Materials and Tribology" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | H | J | K | M | P | R | S | T | V | Ć | Č | Š | Ž
Number of items: 78.

A

Alar, Vesna and Žmak, Irena and Runje, Biserka and Horvatić Novak, Amalija (2016) Development of models for prediction of corrosion and pitting potential on AISI 304 stainless steel in different environmental conditions. = Development of models for prediction of corrosion and pitting potential on AISI 304 stainless steel in different environmental conditions. International Journal of Electrochemical Science, 11. pp. 7674-7689. ISSN 1452-3981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 4.

Alar, Vesna and Žmak, Irena and Stojanović, Ivan and Šimunović, Vinko and Čeralinac, Zoran (2016) Abrasion and erosion wear of electrodeposited Ni-SiC nano-composite coatings. = Abrasion and erosion wear of electrodeposited Ni-SiC nano-composite coatings. In: 16th International Conference on New Trends in Fatigue and Fracture - NT2F16, 24-27.05.2016., Hrvatska, Dubrovnik.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Sakoman, Matija (2016) Multilayer gradient PACVD coating on cemented carbides. = Multilayer gradient PACVD coating on cemented carbides. In: World PM2016 Congress/Exhibition, 09-13.10.2016, Hamburg, Njemačka.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Ćorić, Danko (2016) Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides. = Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides. International journal of refractory metals & hard materials, 54. pp. 82-89. ISSN 0263-4368. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.

Aleksandrov Fabijanić, Tamara and Franz, Mladen and Alar, Željko (2016) Influential factors on hardness uniformity of vickers hardness blocks for high hardness range. = Influential factors on hardness uniformity of vickers hardness blocks for high hardness range. Measurement, 78. pp. 358-365. ISSN 0263-2241. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.

Aleksandrov Fabijanić, Tamara and Jakovljević, Suzana and Franz, Mladen and Jeren, Ivan (2016) Influence of grain growth inhibitors and powder size on the properties of ultrafine and nanostructured cemented carbides sintered in hydrogen. = Influence of grain growth inhibitors and powder size on the properties of ultrafine and nanostructured cemented carbides sintered in hydrogen. Metals, 6 (9). ISSN 2075-4701. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

B

Balaton, Antun (2016) Utjecaj usmjerenosti strukture na savojnu čvrstoću drva. = Effect of anisotropy on bending strength of wood. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Balić, Merima and Lucić, Ružica and Mehadžić, Korina and Bago, Ivona and Anić, Ivica and Jakovljević, Suzana and Plečko, Vanda (2016) The efficacy of photon-initiated photoacoustic streaming and sonic activated irrigation combined with QMiX solution or sodium hypochlorite against intracanal biofilm. = The efficacy of photon-initiated photoacoustic streaming and sonic activated irrigation combined with QMiX solution or sodium hypochlorite against intracanal biofilm. Lasers in medical science, 31 (2). pp. 335-342. ISSN 0268-8921. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 7.

Balog, Martin and Viskić, Joško and Krizik, Peter and Schauperl, Zdravko and Šnajdar, Mateja and Stanec, Zlatko and Ćatić, Amir (2016) CP Ti fabricated by low temperature extrusion of HDH powder: application in dentistry. = CP Ti fabricated by low temperature extrusion of HDH powder: application in dentistry. Key engineering materials, 704. pp. 351-359. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.

Bačić, Ivana and Otmačić Ćurković, Helena and Ćurković, Lidija and Mandić, Vilko and Šokčević, Zrinka (2016) Corrosion Protection of AISI 316L Stainless Steel with the Sol-Gel Yttria Stabilized ZrO2 Films: Effects of Sintering Temperature and Doping. = Corrosion Protection of AISI 316L Stainless Steel with the Sol-Gel Yttria Stabilized ZrO2 Films: Effects of Sintering Temperature and Doping. International Journal of Electrochemical Science, 11 (11). pp. 9192-9205. ISSN 1452-3981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 5.

Bašić, Bojan (2016) Karakterozacija vruće valjane okrugle šipke iz čelika 39NiCrMo3. = Characterisation of hot rolled round bar of steel grade 39NiCrMo3. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Benjak, Mateja (2016) Trošenje noža za kosilicu. = Wear of lawn mover blades. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Botić, Slaven (2016) Utjecaj hrapavosti površine na prionjivost PACVD prevlake na tvrdim metalima. = Influence of the surface roughness on the adhesion of PACVD coating on hardmetals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Brlić, Tin and Rešković, Stoja and Jakovljević, Suzana and Jandrlić, Ivan (2016) Distribution control of trace elements in aluminium oxide ceramics by scanning electron microscope equipped with EDS detector. = Distribution control of trace elements in aluminium oxide ceramics by scanning electron microscope equipped with EDS detector. In: MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.

C

Crnčević, Luka (2016) Mehanička svojstva ortopedskih gipseva. = Mechanical properties of orthopedic casts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Crnčević, Luka and Haramina, Tatjana and Andabak, Anko (2016) Mehanička svojstva ortopedskih gipseva. = Mechanical properties of orthopedic casts. In: 17th International Conference on Materials, Tribology and Recycling MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.

D

Delić, Korana (2016) Tribološka svojstva prevučenih i neprevučenih tvrdih metala. = Tribological properties of coated and uncoated hardmetals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

G

Galić, Iva (2016) Svojstva i primjena piezoelektričnih keramika. = Properties and application of piezoelectric ceramics. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Grlić, Danijel (2016) Mjerna sposobnost optičkog sustava za očitanje veličine otiska tvrdoće. = Measurement capability of an optical system for reading the hardness indentation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

H

Habulan, Marino (2016) Utjecaj nanopunila na mehanička svojstva polimernih kompozita. = Influence of nanoparticles on properties of polymer composite matrix. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Hammer, Vedran (2016) Otpornost na trošenje naplataka automobilskih kotača. = Wear resistance of automotive wheel rims. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Henč-Bartolić, Višnja and Bončina, Tonica and Jakovljević, Suzana and Panjan, Petar and Zupanič, Franc (2016) Damage caused by a nanosecond UV laser on a heated copper surface. = Damage caused by a nanosecond UV laser on a heated copper surface. Applied surface science, 378. pp. 357-361. ISSN 0169-4332. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.

J

Jakovac, Filip (2016) Karakterizacija PACVD prevlake na tvrdom metalu. = Characterization of PACVD coating on hardmetal. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Jakovljević, Suzana (2016) Materials and hip in hip replacement. = Materials and hip in hip replacement. In: HIP A la Carte, 02-03.04.2016., Pula, Hrvatska.

Jokić, Denis (2016) Procjena mjerne nesigurnosti rezultata statičkog vlačnog ispitivanja. = Estimation of measuring uncertenty for results of static tensile testing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

K

Kerekeš, Nikola (2016) Tribološka analiza materijala cijevi jurišne puške. = Tribologycal analysis of assault rifle barrel materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakopčić, Mirko.

Kerolli-Mustafa, Mihone and Mandić, Vilko and Ćurković, Lidija and Šipušić, Juraj (2016) Investigation of thermal decomposition of jarosite tailing waste - A prerequisite for comprehensive jarosite reuse and waste minimization. = Investigation of thermal decomposition of jarosite tailing waste - A prerequisite for comprehensive jarosite reuse and waste minimization. Journal of thermal analysis and calorimetry, 123 (1). pp. 421-430. ISSN 1388-6150. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.

Kerolli-Mustafa, Mihone and Ćurković, Lidija (2016) Analysing the characteristics and application potentials of jarosite waste in kosovo. = Analysing the characteristics and application potentials of jarosite waste in kosovo. Global NEST Journal, 18 (1). pp. 89-97. ISSN 1790-7632. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 2.

Knezović, Ivan (2016) Karakterizacija metalnih kompozita pomoću računalne tomografije. = Characterisation of metal matrix composites by use of the computer tomography. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Kovač, Mia (2016) Karakterizacija biokompozita primjenom skenirajućeg elektronskog mikroskopa. = Characterization of biocomposite in application of scaning electron microscopy. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

M

Mahović Poljaček, Sanja and Tomašegović, Tamara and Cigula, Tomislav and Donevski, Davor and Jakovljević, Suzana (2016) Accelerated Aging of Photopolymeric Material used in Flexography. = Accelerated Aging of Photopolymeric Material used in Flexography. In: ICMIME 2016: 18th International Conference on Materials, Industrial, and Manufacturing Engineering, 11.-12.4. 2016., Venecija, Italija.

Majdak, Ivan (2016) Korozijska postojanost nanostrukturiranih tvrdih metala. = Corrosion resistance of nanostructured hardmetals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

Majdak, Ivan and Alar, Željko (2016) Korozijska postojanost nanostrukturiranih tvrdih metala. = Corrosion stability of nanostructured hardmetals. In: MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.

Majić Renjo, Marijana (2016) Poboljšanje svojstava Al2O3 keramike dodatkom nanočestica ZrO2. = The improvement of Al2O3 ceramics properties by the addition of ZrO2 nanoparticles. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Majić Renjo, Marijana and Ćurković, Lidija and Grilec, Krešimir and Šokčević, Zrinka (2016) Wear performance of slip cast monolithic and composite ceramics. = Wear performance of slip cast monolithic and composite ceramics. In: The 48th International October Conference on Mining and Metallurgy, 28.09.-01.10.2016., Bor, Srbija.

Marinović, Veronika and Ljubas, Davor and Ćurković, Lidija (2016) Effects of concentration and UV radiation wavelengths on photolytic and photocatalytic degradation of azo dyes aqueous solutions by sol-gel TiO2 films. = Effects of concentration and UV radiation wavelengths on photolytic and photocatalytic degradation of azo dyes aqueous solutions by sol-gel TiO2 films. The Holistic Approach to Environment, 7 (1). pp. 3-14. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Markač, Tomislav (2016) Sedimentacija koloidnih Al2O3 suspenzija koje sadrže reciklirani prah;. = Sedimentation of colloid Al2O3 suspension which contain recycled alumina powder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2016) Quenching oil selection based on cooling effects of different oils composition. = Quenching oil selection based on cooling effects of different oils composition. In: 3rd Mediterranean Conference on Heat Treatment and Surface Engineering, 26-28.09.2016., Portorož, Slovenija.

Mićanović, Robert and Rede, Vera (2016) Mehanička svojstva drvno - plastičnih kompozita. = Mechanical properties of wood - plastic composites. In: International Conference on Materials, Tribology, Recycling - MATRIB 2016, 23.-25. 06. 2016., Vela Luka, Hrvatska.

Muslić, Merima and Maksimović, Vesna and Rede, Vera and Šokčević, Zrinka (2016) Utjecaj dodatka lebdećeg pepela i plastične deformacije na korozijsku otpornost Al-legure. = Influence of fly ash addition and plastic deformation on the corrosion resistance of Al-alloy. In: International Conference on Materials, Tribology, Recycling - MATRIB 2016, 23.-25. 06. 2016., Vela Luka, Hrvatska.

P

Pavlica, Nikola (2016) UV-degradacija biorazgradivih polimernih folija. = UV-degradation of biodegradable polymer foils. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Penava, Frano (2016) Primjena bambusa pri izradi bicikla. = Application of bamboo in bicycle. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Penava, Frano and Jakovljević, Suzana and Alar, Željko (2016) Bamboo bicycle – Past or future? = Bamboo bicycle – Past or future? Interdisciplinary description of complex systems, 14 (1). pp. 70-79. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Petruša, Jelena (2016) Polimerni kompoziti za oplatu natjecateljskih motocikala. = Polymer Composites in Racing Motorcycle Bodywork. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Polanović, Tihomir (2016) Određivanje mehaničkih svojstava tankih tvrdih prevlaka. = Determination of mechanical properties for thin hard coatings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

Pongrac, Marko (2016) Materijali za tlačne posude. = Materials for pressure vessels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Primorac, Ivan and Grilec, Krešimir and Jakovljević, Suzana (2016) Ojačane aluminijske pjene. = Reinforced aluminium foams. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016., Vela Luka, Hrvatska.

Pugar, Daniel (2016) Polimer - najzastupljeniji ambalažni materijal današnjice. = Polymer - the most widely used packaging material. In: 20th International Conference on Printing, Design and Graphic Communications Blaž Baromić 2016, 08-10.09.2016., Senj, Hrvatska.

Pugar, Daniel and Haramina, Tatjana (2016) Aktivna i inteligentna ambalaža za pakiranje hrane. = Active and intelligent food packaging. In: 17th International Conference on Materials, Tribology and Recycling MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.

Pustički, Daniel (2016) Utjecaj ECAP postupka na mikrostrukturu Al legura. = Influence of ECAP on Al-alloy microstructure. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

R

Radonić, Luka (2016) Konsolidacija aluminijskog praha. = Consolidation of Al-powder. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Rede, Vera and Šokčević, Zrinka and Budim, Antonio (2016) Utjecaj završne obrade na korozijsku otpornost nehrđajućeg dupleks čeličnog lijeva. = Influence of surface finish on the corrosion resistance of duplex stainless steel casting. In: 15 th INTERNATIONAL FOUNDRYMEN CONFERENCE INNOVATION – The Foundation of Competitive Casting Production, 11–13. 5. 2016., Opatija, Hrvatska.

Repar, Karlo (2016) Izrada glazbenog instrumenta bubnja od zelenog kompozita. = Drum as a musical instrument made from green composite. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Repar, Karlo and Žmak, Irena (2016) Mehanička svojstva lanom ojačanog zelenog kompozita. = Mechanical properties of flax reinforced green composite. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016., Vela Luka, Hrvatska.

Ropuš, Ivana and Haramina, Tatjana and Jagdale, Pravin and Tagliaferro, Alberto (2016) Mechanical properties of epoxy based nanocomposites containing MWCNT as a filler. = Mechanical properties of epoxy based nanocomposites containing MWCNT as a filler. In: 4th International Symposium on Environmental Management - Towards Circular Economy, 7-9.12.2016., Zagreb, Hrvatska.

S

Sakoman, Matija and Ćorić, Danko and Aleksandrov Fabijanić, Tamara and Kovačić, Saša (2016) Potential for PACVD coating on hardmetals. = Potential for PACVD coating on hardmetals. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016, Vela Luka, Hrvatska.

Sakoman, Matija and Ćorić, Danko and Vuić, Dario (2016) Load dependece of hardness and fracture toughness values on hardmetals. = Load dependece of hardness and fracture toughness values on hardmetals. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016., Vela Luka, Hrvatska.

Sambolek, Anamarija (2016) Utjecaj tretiranja površine piezo keramike plazmom na adheziju silikona. = The effect of plasma treatment of piezo ceramics on adhesion of silicone. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Stanec, Zlatko and Halambek, Jasna and Maldini, Krešimir and Balog, Martin and Krizik, Peter and Schauperl, Zdravko and Ćatić, Amir (2016) Titanium ions release from an innovative titanium-magnesium composite: An in vitro study. = Titanium ions release from an innovative titanium-magnesium composite: An in vitro study. Acta stomatologica Croatica, 50 (1). pp. 40-48. ISSN 0001-7019. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.

T

Trupina, Ivan (2016) Karakterizacija čelika nepoznatog sastava. = Characterisation of unknown steel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

V

Vidak, Josip (2016) Trošenje dentalnih svrdala. = Wear of dental burs. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Viderščak, Dalibor (2016) Materijali dijelova mobilnog telefona. = Materials of mobile phone components. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Vindiš, Matija (2016) Rekonstrukcija referentnog etalona sile nazivne vrijednosti 1000 N. = Reconstruction of a reference force standard with the nominal capacity of 1000 N. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

Vrsalović, Ladislav and Paić, Tomislav and Alar, Vesna and Stojanović, Ivan and Jakovljević, Suzana and Gudić, Senka and Smoljko, Ivana (2016) The effects of surface treatment AISI 316L welded joints on its corrosion behaviour in chloride solution. = The effects of surface treatment AISI 316L welded joints on its corrosion behaviour in chloride solution. Kovové materiály, 54 (3). pp. 167-174. ISSN 0023-432X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 7.

Ć

Ćorić, Danko (2016) Svojstva i primjena titana i njegovih legura (Prvi dio). = Properties and Application of Titanium and Titanium Alloys (First Part). Zavarivanje, 59 (5/6). pp. 125-131. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Ćorić, Danko and Majić Renjo, Marijana and Ćurković, Lidija and Žmak, Irena (2016) Indentation fracture toughness of Y-TZP dental ceramics. = Indentation fracture toughness of Y-TZP dental ceramics. In: 16th International Conference on New Trends in Fatigue and Fracture NT2F16, 24-27.05.2016., Dubrovnik, Hrvatska.

Ćurković, Lidija and Bačić, Ivana and Otmačić-Ćurković, Helena and Šokčević, Zrinka (2016) GDOES analysis of sol-gel ZrO2 thin films on austenitic stainless steel. = GDOES analysis of sol-gel ZrO2 thin films on austenitic stainless steel. In: 15th International Foundrymen conference innovation – The Foundation of Competitive Casting Production, 11-13.05.2016., Opatija, Hrvatska.

Ćurković, Lidija and Jukić, Mirela and Šipušić, Juraj and Šokčević, Zrinka (2016) Sorption kinetics of ionic dye from aqueous solution on biomass fly ash. = Sorption kinetics of ionic dye from aqueous solution on biomass fly ash. In: 2nd International and 6th Croatian Scientific and Professional Conference Water For All, 18.03.2016., Osijek.

Ćurković, Lidija and Ljubas, Davor and Marinović, Veronika and Babić, Sandra and Čizmić, Mirta and Majić Renjo, Marijana (2016) Photocatalytic degradation of methyl orange by sol-gel TiO2 films. = Photocatalytic degradation of methyl orange by sol-gel TiO2 films. In: The 48th International October Conference on Mining and Metallurgy, 28.09.-01.10.2016., Bor, Srbija.

Č

Čizmić, Mirta and Ljubas, Davor and Ćurković, Lidija and Babić, Sandra (2016) Photolytic and photocatalytic degradation of pharmaceuticals. = Photolytic and photocatalytic degradation of pharmaceuticals. In: 2nd International and 6th Croatian Scientific and Professional Conference Water for all, 18.03.2016., Osijek.

Š

Šimeg, Lana (2016) Izrada kalupa za ispitna tijela na bazi polimera. = Mould making for test specimens of plastic based materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Šnajdar Musa, Mateja and Marić, Gojko and Grilec, Krešimir (2016) Nanoindentation of closed cell Al alloy foams subjected to different heat treatment regimes. = Nanoindentation of closed cell Al alloy foams subjected to different heat treatment regimes. Composites Part B: Engineering, 89. pp. 383-387. ISSN 1359-8368. Vrsta rada: Editorial. Kvartili JCR: Q1 (2016). Točan broj autora: 3.

Šolić, Sanja and Godec, Matjaž and Schauperl, Zdravko (2016) EBSD analiza acikularnog i bainitnog ferita u zavarima čelika iso 3183 x80m u ovisnosti o udjelu co2 u zaštitnom plinu pri mag zavarivanju. = EBSD Analysis of accicular and bainite ferrite in ISO 3183 X80M steel dependingof CO2 content in shielding gas in MAG welding. In: 41st CWS International conference Welding - Zavarivanje 2016, Opatija, Hrvatska.

Šolić, Sanja and Godec, Matjaž and Schauperl, Zdravko and Donik, Črtomir (2016) Improvement in abrasion wear resistance and microstructural changes with deep cryogenic treatment of austempered ductile cast iron (ADI). = Improvement in abrasion wear resistance and microstructural changes with deep cryogenic treatment of austempered ductile cast iron (ADI). Metallurgical and Materials Transactions A, 47 (10). pp. 5058-5070. ISSN 1073-5623. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Ž

Živčić, Ivančica (2016) Analiza mikrostrukture keltskog mača. = Microstructure analysis of the Celtic sword. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Žmak, Irena and Filetin, Tomislav and Unkić, Faruk (2016) Ductile iron microstructure prediction based on melt thermal analysis using artificial neural networks. = Ductile iron microstructure prediction based on melt thermal analysis using artificial neural networks. In: The 48th International October Conference on Mining and Metallurgy, 28.09.-01.10.2016., Bor, Srbija.

Žmak, Irena and Schauperl, Zdravko and Grilec, Krešimir (2016) Inženjerstvo materijala – temelj inovativne ekonomije. = Materials engineering – the basics of innovative economy. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016., Vela Luka, Hrvatska.

Žmak, Irena and Vurnek, Vjekoslav and Šundrica, Jadran (2016) Flexural modulus of polyester Resin/Miscanthus×giganteus biocomposites. = Flexural modulus of polyester Resin/Miscanthus×giganteus biocomposites. In: 16th International Conference on New Trends in Fatigue and Fracture - NT2F16, 24-27.05.2016., Hrvatska, Dubrovnik.

This list was generated on Thu Feb 22 01:10:27 2024 CET.