Items where Division is "1000 Department of Materials > 1020 Chair of Heat Treatment and Surface Engineering" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | C | G | J | K | L | M | P | R | S | T | V | Z | Ć | Š
Number of items: 25.

B

Barać, Ivan (2010) Pregled postupaka i opreme za toplinsku obradu u Republici Hrvatskoj. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Belić, Tomislav (2010) Kinetika niskotemperaturnog aluminiziranja legiranih čelika. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

C

Cajner, Franjo and Landek, Darko and Leskovšek, Vojteh (2010) Surface modifications of maraging steels used in the manufacture of moulds and dies. = Surface modifications of maraging steels used in the manufacture of moulds and dies. Materiali in Tehnologije, 44 (2). pp. 85-91. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. Journal of Engineering and Technology, 1 (1). pp. 1-9. ISSN 1338-2330. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. In: 10th International Scientific Conference New Ways in Manufacturing Technologies, 17-19. 06. 2010., Prešov; Slovakia.

G

Grilec, Krešimir and Kumić, Ivan and Ćurković, Lidija and Baršić, Gorana (2010) The erosion of AIN ceramics by sand particles. = The erosion of AIN ceramics by sand particles. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

J

Jurić, Ivan (2010) Solarni apsorpcijski rashladni uređaji za hlađenje hotela. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

K

Kodba, Davor (2010) Usporedba direktnog i indirektnog sustava hlađenja objekta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Krsnik, Bojan (2010) Usporedba površinskih slojeva otpornih na trošenje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Kumić, Ivan and Grilec, Krešimir and Ćurković, Lidija (2010) Solid particle erosion of alumina ceramics at different impact angles. = Solid particle erosion of alumina ceramics at different impact angles. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Kumić, Ivan and Grilec, Krešimir and Ćurković, Lidija (2010) Solid particle erosion of alumina ceramics at different impact angles. = Solid particle erosion of alumina ceramics at different impact angles. In: International conference on materials, tribology, recycling, MATRIB 2010, Zagreb, Hrvatska.

L

Landek, Darko and Cajner, Franjo and Kovačić, Saša and Peharec, Ivan (2010) Utjecaj naknadne oksidacije na otpornost trošenju i korozijsku postojanost nitrokarburiranog čelika. = The effect of post oxidizing of nitrocarburized steel on its wear and corrosion resistance. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Lepoša, Leon (2010) Projekt energetske učinkovitosti - rekonstrukcija sustava ventilacije i grijanja bazena ŠRC u Sisku. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir and Grozdek, Marino.

Liščić, Božidar (2010) O nekim aktualnostima u temeljnim fizikalnim i inženjerskim istraživanjima - Iz djelatnosti Stalnog odbora za fizikalne i inženjerske znanosti (PESC) Europske znanstvene zaklade (ESF). = About some actual fundamental research in physical and engineering sciences - From the activity of the Standing Committee for Physical and Engineering Sciences – PESC, of the European Science Foundation – ESF. Bilten Razreda za tehničke znanosti HAZU, XI (1). pp. 7-37. ISSN 1313-6818. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

M

Matijević, Božidar (2010) A low temperature aluminizing treatment of hot work tool steel. = A low temperature aluminizing treatment of hot work tool steel. In: 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, 26-30.7.2010., Rio de Janeiro; Brazil.

P

Popijač, Tomislav (2010) Kovanje odljevaka od bakrenih legura. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Pustaić, Dragan and Cajner, Franjo (2010) Influence of Microstructure of 65 Si 7 Steel on its Mechanical Properties. = Influence of Microstructure of 65 Si 7 Steel on its Mechanical Properties. In: 6th International Conference on Materials Structure & Micromechanics of Fracture, 28-30.06.2010., Brno; Czech Republic.

R

Rabuzin, Dejan (2010) Utjecaj dubokog hlađenja i prevlačenja na trošenje brzoreznog čelika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

S

Stupnišek, Mladen (2010) Heat treatment in an environmentally-Friendly gas atmosphere. = Heat treatment in an environmentally-Friendly gas atmosphere. In: 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, 26-30.7.2010., Rio de Janeiro; Brazil.

T

Tkalec, Andrija (2010) Postupci oksidacije aluminiziranih čelika za topil rad. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Turbuk, Igor (2010) Utjecaj toplinske obrade na trajnost reznih alata. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

V

Vujnović, Aljoša (2010) Kalupi za tlačni lijev aluminijskih legura. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Z

Zdelarec, Ivica (2010) Utjecaj dubokog hlađenja na pojave pri popuštanju brzoreznog čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Ć

Ćurković, Lidija and Kumić, Ivan and Grilec, Krešimir (2010) SEM analysis of erosion mehanisms of alumina ceramics. = SEM analysis of erosion mehanisms of alumina ceramics. In: 42nd International October Conference on Mining and Metallurgy, 10-13.10.2010., Kladovo; Serbia.

Š

Šolić, Sanja and Cajner, Franjo and Leskovšek, Vojteh and Rafael, Hrvoje (2010) Utjecaj parametara toplinske obrade na svojstva brzoreznog čelika PM S390 MC. = Influence of heat treatment parameters on PM S390 MC high speed steel properties. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

This list was generated on Sun Sep 23 06:30:03 2018 CEST.