Items where Division is "1000 Department of Materials > 1020 Chair of Heat Treatment and Surface Engineering" and Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | C | H | K | L | M | P | S | Z | Ž
Number of items: 25.

B

Babić, Damir (2014) Karakterizacija aluminiziranih slojeva nehrđajučih čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Boban, Luka (2014) Parametarska analiza bušotinskog izmjenjivača topline u tlu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

C

Cajner, Franjo and Landek, Darko and Cajner, Hrvoje and Rafael, Hrvoje and Kovačić, Saša (2014) Characteristics of Warm Baths for the quenching of Tool Steels. = Characteristics of Warm Baths for the quenching of Tool Steels. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 09.-11.04.2014., Ljubljana, Slovenija.

Cajner, Franjo and Landek, Darko and Kumić, Ivan and Kovačić, Saša and Rafael, Hrvoje (2014) Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. = Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Cajner, Franjo and Leskovšek, Vojteh and Pustaić, Dragan (2014) Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. = Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.

H

Hren, Ivan (2014) Utjecaj načina gašenja dubokog hlađenja na popuštanje čelika K490 Microclean. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

K

Kozmar, Hrvoje and Liščić, Božidar and Senjanović, Ivo and Čorić, Većeslav and Tomić, Marko and Hadžić, Neven (2014) Off shore Wind Power Plant in the Adriatic Sea: An Opportunity for the Croatian Economy. = Off shore Wind Power Plant in the Adriatic Sea: An Opportunity for the Croatian Economy. Transactions on maritime science, 2. pp. 103-110. ISSN 1848-3305. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

L

Landek, Darko and Cajner, Franjo and Rafael, Hrvoje and Ćavar, Antonio (2014) Effect of Application of Deep - cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC. = Effect of Application of Deep - cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 9-11.04.2014., Ljubljana, Slovenija.

Landek, Darko and Lisjak, Dragutin and Lübben, Thomas and Župan, Josip (2014) Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling. = Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling. Materials Performance and Characterization, 3 (4). pp. 99-117. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Župan, Josip (2014) Selection of optimal conditions for immersion quenching. = Selection of optimal conditions for immersion quenching. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Landek, Darko and Župan, Josip and Filetin, Tomislav (2014) A Prediction of Quenching Parameters Using Inverse Analysis. = A Prediction of Quenching Parameters Using Inverse Analysis. Materials Performance and Characterization, 3 (4). ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Liščić, Božidar and Filetin, Tomislav and Landek, Darko and Župan, Josip (2014) Current Investigations at Quenching Research Centre. = Current Investigations at Quenching Research Centre. Materials Performance and Characterization, 3 (4). pp. 3-18. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

M

Matijević, Božidar (2014) Evaluation of Boride Layer Growth on Carbon Steel Surfaces. = Evaluation of Boride Layer Growth on Carbon Steel Surfaces. Metal Science and Heat Treatment, 56 (5-6). pp. 269-273. ISSN 0026-0673. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 1.

Matijević, Božidar (2014) Study of the growth of boride layer on the surface carbon steel. = Study of the growth of boride layer on the surface carbon steel. Metallovedenie i termicheskaya obrabotka metallov, 153. pp. 41-45. ISSN 0026-0819. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Matijević, Božidar and Pedišić, Ljiljana (2014) Influence of additive chemistry on the physical, chemical and cooling properties of quenching oils. = Influence of additive chemistry on the physical, chemical and cooling properties of quenching oils. Materials performancemance and Characterization, 4 (3). pp. 283-292. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Mustafić, Haris (2014) Duplex postupci prevlačenja čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

P

Pajan, Matija (2014) Mehanizmi dotrajavanja kalupa za tlačni lijev. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Pedišić, Ljiljana and Matijević, Božidar and NOVINA, Bruno (2014) Quenching oil selection based on tribological effects at metal cooling processes. = Quenching oil selection based on tribological effects at metal cooling processes. In: 8th Int. Conference on Tribology BALKANTRIB'14, 30.10 - 1.11.2014., Sinaia, Romania.

Prester, Jasna and Matijević, Božidar (2014) Organization of the Purchasing Function for Innovation. = Organization of the Purchasing Function for Innovation. In: ICOMS 2014: XII International Conference on Operations Management and Strategy, 13-14.11.2014, Venecija, Italija.

Pustaić, Dragan and Cajner, Franjo (2014) Influence of heat treatment on crack tip opening displacement and on resistance of crack propagation of alloyed steel. = Influence of heat treatment on crack tip opening displacement and on resistance of crack propagation of alloyed steel. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.

S

Stanečić, Josip (2014) Karakterizacija PACVD slojeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Z

Zoričić, Mate (2014) Otpornost čelika X155CrVMo-12 na abrazivnu eroziju česticama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Ž

Župan, Josip and Filetin, Tomislav and Landek, Darko (2014) Analysis of the quenching oil' s cooling curves with agitation and with addition of nanoparticles. = Analysis of the quenching oil' s cooling curves with agitation and with addition of nanoparticles. In: European Conference on Heat Treatment and 21st IFHTSE Congress, Minhen, Njemačka.

Župan, Josip and Filetin, Tomislav and Landek, Darko (2014) Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles. = Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Župan, Josip and Landek, Darko and Filetin, Tomislav (2014) Cooling characteristics of water based nanofluids with agitation. = Cooling characteristics of water based nanofluids with agitation. Materials Performance and Characterization, 3 (4). pp. 326-336. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

This list was generated on Sun Sep 23 06:30:00 2018 CEST.