Items where Division is "1000 Department of Materials > 1020 Chair of Heat Treatment and Surface Engineering" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | H | J | K | L | M | R | S | V
Number of items: 22.

B

Babić, Damir (2016) Utjecaj kemijskog sastava čelika na svojstva aluminiziranih slojeva. = Influence of chemical composition of steels on properties of aluminized layers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Babić, Domagoj (2016) Utjecaj debljine TiCN prevlake na otpornost abrazijskom trošenju visokolegiranih alatnih čelika za hladni rad. = Influence of TiCN coating thickness on abrasion wear resistance of high alloyed cold work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Bogdanić, Dino and Landek, Darko (2016) Povećanje otpornosti na abrazijsko trošenje primjenom tvrdih PACVD prevlaka. = Improvement of abrasion wear resistance by using hard PACVD coating. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.

Budim, Antonio (2016) Utjecaj stanja površine na korozijsku postojanost nehrđajućeg dupleks čeličnog lijeva. = Effects of surface state on the corrosion resistance of a cast duplex stainless steel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

H

Horgas, Vedran (2016) Termodifuzijski postupak boriranja čelika. = Thermo diffusion process boriding of steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Horvat, Tomislav (2016) Povišenje otpornosti na adhezijsko trošenje titanove legure Ti6Al4V primjenom prevlake PACVD TiN. = Increasing resistance to adhesive wear of titanium alloy Ti6Al4V applying coating PACVD TiN. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

J

Jačan, Jurica (2016) Ispitivanje otpornosti na erozijsko trošenje tvrdih prevlaka proizvedenih PACVD postupkom. = Erosion wear testing of hard coatings produced by PACVD process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Jačan, Jurica and Landek, Darko (2016) Ispitivanje otpornosti na erozijsko trošenje tvrdih prevlaka proizvedenih PACVD postupkom. = Erosion wear testing of hard coatings produced by PACVD process. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.

K

Kovačić, Saša and Cajner, Franjo and Landek, Darko (2016) Influence of steel substrate on the properties of PACVD gradient multilayer TiCN coating. = Influence of steel substrate on the properties of PACVD gradient multilayer TiCN coating. In: 3rd Mediterranean Conference on Heat Treatment and Surface Engineering, 26-28.09.2016., Portorož, Slovenija.

L

Liščić, Božidar and Matijević, Božidar and Totten, George Edward and Canale, Lauralice de C.F. (2016) Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil and Canola Oil Based on Temperature Gradients. = Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil and Canola Oil Based on Temperature Gradients. In: The 5th Asian Conference on Heat Treatment and Surface Engineering, 12-14.11.2016., Hangzhou, China.

Liščić, Božidar and Totten, George Edward and Canale, Lauralice de C.F. and Matijević, Božidar (2016) A New Probe to Measure and Evaluate the Real Quenching Intensity Based on Temperature Gradients. = A New Probe to Measure and Evaluate the Real Quenching Intensity Based on Temperature Gradients. In: 23rd IFHTSE CONGRESS, 18-21.04.2016., SAVANNA H, GEORGIA, USA.

M

Macura, Vladimir (2016) Ispitivanje korozijske postojanosti PACVD prevlaka na alatnim čelicima za topli rad. = Corrosion testing of the PACVD coatings deposited on hot work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2016) Quenching oil selection based on cooling effects of different oils composition. = Quenching oil selection based on cooling effects of different oils composition. In: 3rd Mediterranean Conference on Heat Treatment and Surface Engineering, 26-28.09.2016., Portorož, Slovenija.

Matić, Ante (2016) Utjecaj prethodne toplinske obrade alatnog čelika K490MC na svojstva PACVD prevlake TiN/TiCN. = Influence of the previous heat treatment of tool steel K490MC on the PACVD TiN/TiCN coating properties. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

R

Radiković, Marsel (2016) Ispitivanje adhezivnosti PACVD TiN/TiCN prevlake na alatnim čelicima za hladni rad. = Adhesivity testing of hard PACVD TiN/TiCN coating deposited on cold work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Razum, Tomislav (2016) Ispitivanje prionjivosti tvrdih PACVD prevlaka na alatnom čeliku za topli rad. = Adhesivity testing of the hard PACVD coatings applied on hot work tool steel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Rozing, Goran and Alar, Vesna and Landek, Darko (2016) Poboljšanje triboloških svojstava martenzitnih korozijski postojanih čelika. = Improvement of tribological properties of martensitic stainless steel. In: 22. Međunarodno savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb, Hrvatska.

S

Sakoman, Matija and Ćorić, Danko and Aleksandrov Fabijanić, Tamara and Kovačić, Saša (2016) Potential for PACVD coating on hardmetals. = Potential for PACVD coating on hardmetals. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016, Vela Luka, Hrvatska.

Slaćanin, Ivan (2016) Doprinos dubokog hlađenja poboljšanju svojstava visokolegiranih alatnih čelika za hladni rad. = Contribution of deep cryogenic treatment on the properties of high alloyed cold work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Smolčić, Ivan (2016) Utjecaj načina šaržiranja obradaka na svojstva PACVD prevlaka. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Stilin, Karlo (2016) Povišenje otpornosti na adhezijsko trošenje titanove legure Ti6Al4V plazmatskim nitriranjem. = Increasing adhesive wear resistance of titanium alloy Ti6Al4V by plasma nitriding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

V

Vijinigiri, Tejaswi and Kumawat, Kamal and Matijević, Božidar (2016) Effect of carbon thermodynamic activity in steels on boride layer growth. = Effect of carbon thermodynamic activity in steels on boride layer growth. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.

This list was generated on Sun Sep 23 06:29:59 2018 CEST.