Browse by Type

Novosel, Darko and Slapničar, Vedran (2012) Usporedba glavnih značajki klasičnog i vakuumskog načina prikupljanja i odvodnje sanitarne otpadne vode na brodu za rasute terete. = Comparison of main characteristics between classical and vacuum drainage of sewage on bulk carrier. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Ljubenkov, Boris and Žiha, Kalman (2014) Conceptual design of shipyard for seagoing ships on the river Danube. = Conceptual design of shipyard for seagoing ships on the river Danube. In: 15th International Congress of the International Maritime Association of the Mediterranean, IMAM 2013;, 14-17.10.2013., A Coruna; Spain.

Jurišić, Paul and Parunov, Joško and Žiha, Kalman (2012) Uncertainty in corrosion wastage prediction of oil tankers. = Uncertainty in corrosion wastage prediction of oil tankers. In: 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13 September - 16 September 2011., Genova, Italy.

Kodvanj, Janoš and Žiha, Kalman and Ljubenkov, Boris and Bakić, Ante (2012) Mechanical characteristics of the shipbuilding stainless steel at sub-zero temperatures. = Mechanical characteristics of the shipbuilding stainless steel at sub-zero temperatures. In: Conference of 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13 September - 16 September 2011., Genova, Italy.

Žiha, Kalman and Kodvanj, Janoš and Ljubenkov, Boris and Dupor, Nikola and Bakić, Ante (2012) Strength and reliability of ships 'as-built'. = Strength and reliability of ships 'as-built'. In: ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2012, 01-06.07.2012., Rio de Janeiro, Brazil.

Baleta, Jakov and Vujanović, Milan and Pachler, Klaus and Duić, Neven (2014) Implementation and validation of the mathematical model of surface tension into CFD wall film module. = Implementation and validation of the mathematical model of surface tension into CFD wall film module. In: Joint 11th World Congress on Computational Mechanics, WCCM 2014, the 5th European Conference on Computational Mechanics, ECCM 2014 and the 6th European Conference on Computational Fluid Dynamics, ECFD 2014, 20-25.07.2014., Barcelona; Spain.

Pukšec, Tomislav and Vad Mathiesen, Brian and Duić, Neven (2011) Long term energy demand projections for croatian transport sector. = Long term energy demand projections for croatian transport sector. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.

Ćosić, Boris and Markovska, Nataša and Taseska, Verica and Krajačić, Goran and Duić, Neven (2011) Improving the RES absorption capacity of the macedonian energy system. = Improving the RES absorption capacity of the macedonian energy system. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.

Krajačić, Goran and Duić, Neven and Mathiesen, Brian Vad and Da Graça Carvalho, Maria (2010) Smart energy storages for integration of renewables in 100% independent energy systems. = Smart energy storages for integration of renewables in 100% independent energy systems. In: 19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7, 28.8.-1.9.2010., Prague; Czech Republic.

Deur, Joško and Cipek, Mihael and Petrić, Joško (2010) Bond graph modeling of series-parallel hybrid electric vehicle power train dynamics. = Bond graph modeling of series-parallel hybrid electric vehicle power train dynamics. In: 9th International Conference on Bond Graph Modeling & Simulation (ICBGMS), Spring Simulation Multiconference 2010, 11-15.04.2010., Orlando, FL, United States.

Maljković, Zlatko and Stegić, Milenko and Kuterovac, Ljiljana (2010) Torsional oscillations of the turbine-generator due to network faults. = Torsional oscillations of the turbine-generator due to network faults. In: 14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010, 6-8.9.2010., Ohrid; Macedonia.

Žanić, Vedran and Andrić, Jerolim and Prebeg, Pero and Stipčević, Marko and Pirić, Karlo (2010) Ropax structural design-multi-level decision support methodology. = Ropax structural design-multi-level decision support methodology. In: 11th International Symposium on Practical Design of Ships and Other Floating Structures, PRADS 2010, 19.-24.09.2010., Rio de Janeiro; Brazil.

Matijević, Božidar (2010) A low temperature aluminizing treatment of hot work tool steel. = A low temperature aluminizing treatment of hot work tool steel. In: 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, 26-30.7.2010., Rio de Janeiro; Brazil.

Grubišić, Rajko (2010) Evaluation of propeller-hull interaction in early stage of ship design. = Evaluation of propeller-hull interaction in early stage of ship design. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Tepeš, Bojan and Deur, Joško and Kasać, Josip (2010) Optimization of control variables for automated transmission engagement. = Optimization of control variables for automated transmission engagement. In: UKACC International Conference on CONTROL 2010, 07-10.09.2010., Coventry, United Kingdom.

Parunov, Joško and Žiha, Kalman and Mage, Paulo and Jurišić, Paul (2010) Hull girder fatigue strength of corroding oil tanker. = Hull girder fatigue strength of corroding oil tanker. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Šestan, Ante and Ljubenkov, Boris and Vladimir, Nikola (2010) Investigation of propulsion system torsional vibration resonance of a catamaran vessel in service. = Investigation of propulsion system torsional vibration resonance of a catamaran vessel in service. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Pavković, Neven and Bojčetić, Nenad and Vadla, Ivan and Rohde, Danijel (2010) Embedding design rationale capturing in PLM systems - A case study with IBIS-based diagrams. = Embedding design rationale capturing in PLM systems - A case study with IBIS-based diagrams. In: 11th International Design Conference, DESIGN 2010, 17-20.05.2010., Dubrovnik; Croatia.

Štorga, Mario and Marjanović, Dorian and Kelava, Josip (2010) Dynamic engineering information traceability based on DITA standard. = Dynamic engineering information traceability based on DITA standard. In: 8th Workshop on Integrated Product Development, IPD 2010, 15-17.09.2010., Magdeburg; Germany.

Novaković, Branko (2010) Generalized relativistic Hamiltonian in an alpha field. = Generalized relativistic Hamiltonian in an alpha field. In: 9th International Conference on Computing Anticipatory Systems, CASYS'09, 03-08.08.2009., Liege, Belgium.

Deur, Joško and Assadian, Francis and Hancock, Matthew (2010) Parameter optimization of PID class of yaw rate controllers. = Parameter optimization of PID class of yaw rate controllers. In: UKACC International Conference on CONTROL 2010, 07-10.09.2010., Coventry, United Kingdom.

Petrić, Joško and Cipek, Mihael and Deur, Joško (2010) A power-split hybrid hydraulic vehicle transmission modeling and comparative analysis. = A power-split hybrid hydraulic vehicle transmission modeling and comparative analysis. In: SAE 2010 Commercial Vehicle Engineering Congress, 05-06.10.2010., Chicago, IL, United States.

Žiha, Kalman and Parunov, Joško and Ćorak, Maro and Tušek, Berislav (2010) Improving the ultimate strength of ship hull. = Improving the ultimate strength of ship hull. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Čudina, Predrag and Žanić, Vedran and Prebeg, Pero (2010) Multiattribute decision making methodology in the concept design of tankers and bulk-carriers. = Multiattribute decision making methodology in the concept design of tankers and bulk-carriers. In: 11th International Symposium on Practical Design of Ships and Other Floating Structures, PRADS 2010, 19.-24.09.2010., Rio de Janeiro; Brazil.

Slapničar, Vedran and Ukas, Božidar (2010) Aircraft carrier stability in damaged condition. = Aircraft carrier stability in damaged condition. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Žmak, Irena and Ćurković, Lidija and Filetin, Tomislav (2010) The use of artificial neural network (ANN) for prediction of removal of Co2+ and Ni2+ ions from waste water by electric furnace slag. = The use of artificial neural network (ANN) for prediction of removal of Co2+ and Ni2+ ions from waste water by electric furnace slag. In: 69th World Foundry Congress 2010, WFC 2010, 16-20.10.2010., Hangzhou; China.

Ljubenkov, Boris and Zaplatić, Tomislav and Žiha, Kalman and Bosančić, Filip (2010) Measurements for reliability of ship production and operation interaction. = Measurements for reliability of ship production and operation interaction. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Sušić, Aleksandar and Štorga, Mario and Majić, Marijana (2010) Ergonomic assessment in conceptual and embodiment design. = Ergonomic assessment in conceptual and embodiment design. In: 11th International Design Conference, DESIGN 2010, 17-20.05.2010., Dubrovnik; Croatia.

Čanžar, Predrag and Tonković, Zdenko and Kodvanj, Janoš and Bakić, Ante and Tomičević, Zvonimir and Surjak, Martin (2010) Fatigue crack initiation and propagation modelling using a cyclic plasticity constitutive formulation. = Fatigue crack initiation and propagation modelling using a cyclic plasticity constitutive formulation. In: 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, 30.08.-03.09. 2010., Dresden; Germany.

Pustaić, Dragan and Lovrenić-Jugović, Martina and Wolf, Hinko (2010) Investigation of crack opening in isotropic strain hardening material. = Investigation of crack opening in isotropic strain hardening material. In: 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, 30.08.-03.09. 2010., Dresden; Germany.

Rudan, Smiljko (2010) High cycle and low cycle fatigue in ship structures. = High cycle and low cycle fatigue in ship structures. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Perić, Nedjeljko and Jelavić, Mate and Ban, Željko and Domitrović, Hrvoje and Matijašević, Branimir and Kostelac, Milan and Mikac, Stjepan (2010) Wind turbine control research in the laboratory for renewable energy sources. = Wind turbine control research in the laboratory for renewable energy sources. In: European Wind Energy Conference and Exhibition 2010, EWEC 2010, 20-23.4.2010., Warsaw; Poland.

Kitarović, Stanislav and Andrić, Jerolim and Žanić, Vedran (2010) Extended IACS incremental-iterative method for calculation of hull girder ultimate strength in analysis and design. = Extended IACS incremental-iterative method for calculation of hull girder ultimate strength in analysis and design. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Ćurković, Petar and Jerbić, Bojan and Stipančić, Tomislav (2010) Cooperative coevolution applied to dual-arm robot motion planning. = Cooperative coevolution applied to dual-arm robot motion planning. In: 10th IFAC Workshop on Intelligent Manufacturing Systems, IMS'10, 01-02.07.2010., Lisbon, Portugal.

Cipek, Mihael and Deur, Joško and Petrić, Joško (2010) Bond graph modeling and analysis of series-parallel hybrid electric vehicle transmissions. = Bond graph modeling and analysis of series-parallel hybrid electric vehicle transmissions. In: SAE 2010 World Congress and Exhibition, 13-15-04.2010., Detroit, MI, United States.

Alar, Željko and Franz, Mladen and Aleksandrov Fabijanić, Tamara (2010) Investigation of test force of reference hardness standard of Croatia. = Investigation of test force of reference hardness standard of Croatia. In: 21st Conference on Measurement of Force, Mass and Torque, 21.-25.11.2010., Pattaya; Thailand.

Milić, Vladimir and Kasać, Josip and Majetić, Dubravko and Šitum, Željko (2010) A BPTT-like min-max optimal control algorithm for nonlinear systems. = A BPTT-like min-max optimal control algorithm for nonlinear systems. In: International Conference on Numerical Analysis and Applied Mathematics 2010, ICNAAM-2010, 19-25.09.2010., Rhodes, Greece.

Božić, Željko and Parunov, Joško and Fadljevic, Marko (2010) Fatigue crack propagation in stiffened panels under tension loading. = Fatigue crack propagation in stiffened panels under tension loading. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Munić, Ivan and Slapničar, Vedran and Stupalo, Viktor (2010) The effect of L/B and B/T variation on subdivision indexes. = The effect of L/B and B/T variation on subdivision indexes. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Ćorak, Maro and Parunov, Joško and Teixeira, Ângelo Palos and Guedes Soares, Carlos (2010) Performance of the Common Structural Rules design formulations for the ultimate strength of uniaxially loaded plates and stiffened panels. = Performance of the Common Structural Rules design formulations for the ultimate strength of uniaxially loaded plates and stiffened panels. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Senjanović, Ivo and Tomašević, Stipe and Vladimir, Nikola and Tomić, Marko and Malenica, Šime (2010) Application of an advanced beam theory to ship hydroelastic analysis. = Application of an advanced beam theory to ship hydroelastic analysis. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Stupnišek, Mladen (2010) Heat treatment in an environmentally-Friendly gas atmosphere. = Heat treatment in an environmentally-Friendly gas atmosphere. In: 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, 26-30.7.2010., Rio de Janeiro; Brazil.

Žanić, Vedran and Kitarović, Stanislav and Prebeg, Pero (2010) Safety as objective in multicriterial structural optimization. = Safety as objective in multicriterial structural optimization. In: ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2010, 6-11.06.2010., Shanghai; China.

Stanković, Tino and Bojčetić, Nenad and Marjanović, Dorian (2010) Developing computational tool for generation of operand transformation variants in technical processes. = Developing computational tool for generation of operand transformation variants in technical processes. In: 11th International Design Conference, DESIGN 2010, 17-20.05.2010., Dubrovnik; Croatia.

Osman, Krešimir and Bojčetić, Nenad and Marjanović, Dorian (2010) Multi criteria decision making in product platform development and evaluation. = Multi criteria decision making in product platform development and evaluation. In: 11th International Design Conference, DESIGN 2010, 17-20.05.2010., Dubrovnik; Croatia.

Zvizdić, Davor and Grgec Bermanec, Lovorka (2010) Proficiency test in the gauge pressure range for Croatian accredited laboratories. = Proficiency test in the gauge pressure range for Croatian accredited laboratories. In: 3rd International Metrology Conference 2010, CAFMET 2010, 18-23.4.2010., Cairo; Egypt.

Cipek, Mihael and Deur, Joško and Petrić, Joško (2010) Bond graph analysis of power flow in series-parallel hybrid electric vehicle transmissions. = Bond graph analysis of power flow in series-parallel hybrid electric vehicle transmissions. In: UKACC International Conference on CONTROL 2010, 07-10.09.2010., Coventry, United Kingdom.

Terze, Zdravko and Müller, Andreas (2010) Preface to Symposium on Computational Geometric Methods in Multibody System Dynamics. = Preface to Symposium on Computational Geometric Methods in Multibody System Dynamics. In: International Conference on Numerical Analysis and Applied Mathematics 2010, ICNAAM-2010, 19-25.09.2010., Rhodes; Greece.

Perić, Mato and Tonković, Zdenko and Karšaj, Igor (2010) Numerical analysis of residual stresses using a shell/3D modelling technique. = Numerical analysis of residual stresses using a shell/3D modelling technique. In: International Conference on Advances in Welding Science and Technology for Construction, Energy and Transportation, AWST 2010, 11-17.07.2010., Istanbul; Turkey.

Terze, Zdravko and Vrdoljak, Milan and Zlatar, Dario (2010) Geometric mathematical framework for multibody system dynamics. = Geometric mathematical framework for multibody system dynamics. In: International Conference on Numerical Analysis and Applied Mathematics 2010, ICNAAM-2010, 19-25.09.2010., Rhodes; Greece.

Rumbak, Slavko and Mudronja, Vedran and Šakić, Nikola and Cajner, Hrvoje and Bogut, Marijan (2010) Analysis of ignition risk to ball bearings in rotating equipment in explosive atmospheres. = Analysis of ignition risk to ball bearings in rotating equipment in explosive atmospheres. In: PCIC Europe 2010 Conference, PCIC EUROPE 2010, 15-17. 06. 2010., Oslo; Norway.

Žiha, Kalman and Skala, Karolj (2010) Virtual modelling in shipbuilding. = Virtual modelling in shipbuilding. In: 33rd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2010, 24-28.05.2010., Opatija; Croatia.

Keran, Zdenka and Math, Miljenko and Škunca, Marko (2010) Coining as a microforming process. = Coining as a microforming process. In: 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009), NUMIFORM 2010, 13-17.06.2010., Pohang; South Korea.

Botinčan, Matko and Glavan, Paola and Runje, Davor (2010) Verification of causality requirements in Java memory model is undecidable. = Verification of causality requirements in Java memory model is undecidable. In: 8th International Conference on Parallel Processing and Applied Mathematics, PPAM 2009, 13.-16.09.2009., Wroclaw; Poland.

Hrgetić, Mario and Deur, Joško and Pavković, Danijel and Lakehal-Ayat, Mohsen and Tseng, Eric (2009) Adaptive Kalman filter-based yaw rate estimation using accelerometers and wheel speed sensors. = Adaptive Kalman filter-based yaw rate estimation using accelerometers and wheel speed sensors. In: 2009 ASME Dynamic Systems and Control Conference, DSCC2009, 12-14.10.2009., Hollywood, CA, United States.

Stanković, Tino and Shea, Kristina and Štorga, Mario and Marjanović, Dorian (2009) Grammatical evolution of technical processes. = Grammatical evolution of technical processes. In: 2009 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009, 30.08-02.09.2009., San Diego, CA; United States.

Ivanović, Vladimir and Deur, Joško and Hancock, Matthew and Assadian, Francis (2010) A closed-loop strategy of active differential clutch control. = A closed-loop strategy of active differential clutch control. In: 2009 ASME Dynamic Systems and Control Conference, DSCC2009, 12-14.10.2009., Hollywood, CA; United States.

Terze, Zdravko and Matijašević, Dubravko and Vrdoljak, Milan and Koroman, Vladimir (2010) Differential-geometric characteristics of optimized generalized coordinates partitioned vectors for holonomic and non-holonomic multibody systems. = Differential-geometric characteristics of optimized generalized coordinates partitioned vectors for holonomic and non-holonomic multibody systems. In: 2009 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009, 30.08-02.09. 2009., San Diego, CA; United States.

Stipančić, Tomislav and Jerbić, Bojan (2010) Self-adaptive vision system. = Self-adaptive vision system. In: IFIP Advances in Information and Communication Technology, 22-24.02.2010., Costa de Caparica, Portugal.

Ćurković, Petar and Jerbić, Bojan (2010) Dual-arm robot motion planning based on cooperative coevolution. = Dual-arm robot motion planning based on cooperative coevolution. In: Doctoral conference on Computing, Electrical and Industrial Systems, DoCEIS 2010, 22-24.02.2010., Lisabon, Portugal.

Semenski, Damir and Wolf, Hinko and Božić, Željko (2010) Analysis of damaging process and crack propagation. = Analysis of damaging process and crack propagation. In: 14th International Conference on Experimental Mechanics, ICEM 2014, 04-09.07.2010., Poitiers; France.

Ćosić, Predrag and Volarević, Nikola (2010) Some aspects of process planning improvement. = Some aspects of process planning improvement. In: International Conference on Industrial Logistics: Logistics and Sustainability, ICIL 2010, 08.-11.03.2010., Rio de Janeiro; Brazil.

Horvat, Marko and Kodvanj, Janoš and Bakić, Ante (2010) The influence of contact surface shape on the mechanical properties of osteosynthetic plates. = The influence of contact surface shape on the mechanical properties of osteosynthetic plates. In: 14th International Conference on Experimental Mechanics, ICEM 2014, 04-09.07.2010., Poitiers; France.

Bakić, Ante and Semenski, Damir and Jecić, Stjepan (2010) The caustics method in the contact problems of anisotropic materials. = The caustics method in the contact problems of anisotropic materials. In: 14th International Conference on Experimental Mechanics, ICEM 2014, 04-09.07.2010., Poitiers; France.

Midžić, Ida and Stanković, Tino and Marjanović, Dorian (2010) Context-free grammar based rules for component-level product structure modelling. = Context-free grammar based rules for component-level product structure modelling. In: 11th International Design Conference, DESIGN 2010, 17-20.05.2010., Dubrovnik; Croatia.

Parunov, Joško and Ćorak, Maro and Senjanović, Ivo (2011) Environmental and operational uncertainties in long-term prediction of slamming loads of containerships. = Environmental and operational uncertainties in long-term prediction of slamming loads of containerships. In: 3rd International Conference on Marine Structures, MARSTRUCT 2011, 28-30.03.2011., Hamburg; Germany.

Keran, Zdenka and Math, Miljenko and Piljek, Petar (2011) Modified hydraulic bulging for determination of flow stress curve. = Modified hydraulic bulging for determination of flow stress curve. In: 10th International Conference on Technology of Plasticity, ICTP 2011, 25-30. 10. 2011., Aachen; Germany.

Garbatov, Yordan Y. and Rudan, Smiljko and Gaspar, Bruno and Guedes Soares, Carlos (2011) Fatigue assessment of marine structures. = Fatigue assessment of marine structures. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.

Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) A multiagent framework for industrial robotic applications. = A multiagent framework for industrial robotic applications. In: Complex Adaptive Systems, 31.10-02.11.2011., Chicago, IL, United States.

Pavković, Neven and Marjanović, Dorian and Kovačević, Antonijo and Fain, Nuša (2011) Industrial partnership in design education - Experiences from EGPR course. = Industrial partnership in design education - Experiences from EGPR course. In: 13th International Conference on Engineering and Product Design Education, E and PDE 2011, 08-09.09.2011., London; United Kingdom.

Pavković, Neven and Bojčetić, Nenad and Franić, Leonard and Marjanović, Dorian (2011) Case studies to explore indexing issues in product design traceability framework. = Case studies to explore indexing issues in product design traceability framework. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.

Ivanović, Vladimir and Deur, Joško and Milutinović, Milan and Tseng, Hongtei Eric (2011) Dynamic model of dual clutch lever-based electromechanical actuator. = Dynamic model of dual clutch lever-based electromechanical actuator. In: ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, 31.10-02.11.2011., Arlington, VA, United States.

Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko and Malenica, Šime (2011) A sophisticated beam model for hydroelastic analysis of Ultra Large Container Ships. = A sophisticated beam model for hydroelastic analysis of Ultra Large Container Ships. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.

Žiha, Kalman (2011) Modeling of worsening. = Modeling of worsening. In: International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011, 19-22.07.2011., Orlando, FL; United States.

Stanković, Tino and Shea, Kristina and Štorga, Mario and Marjanović, Dorian (2011) An approach for the automated synthesis of technical processes. = An approach for the automated synthesis of technical processes. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.

Senjanović, Ivo and Vladimir, Nikola and Malenica, Šime and Tomić, Marko (2011) Improvements of beam structural modelling in hydroelasticity of Ultra Large Container Ships. = Improvements of beam structural modelling in hydroelasticity of Ultra Large Container Ships. In: ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2011, 19 do 24. 06. 2011., Rotterdam; Netherlands.

Ćatipović, Ivan and Čorić, Većeslav and Veić, Duje (2011) Calculation of floating crane natural frequencies based on linearized multibody dynamics. = Calculation of floating crane natural frequencies based on linearized multibody dynamics. In: ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2011, 19 do 24. 06. 2011., Rotterdam; Netherlands.

Stevanović, Milan and Marjanović, Dorian (2011) The continous "Fuzzy Front End" as a part of the innovation process. = The continous "Fuzzy Front End" as a part of the innovation process. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.

Štorga, Mario and Marjanović, Dorian and Savšek, Tomaž (2011) Reference model for traceability records implementation in engineering design environment. = Reference model for traceability records implementation in engineering design environment. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.

Teixeira, Ângelo Palos and Parunov, Joško and Guedes Soares, Carlos (2011) Assessment of ship structural reliability. = Assessment of ship structural reliability. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.

Marjanović, Dorian and Štorga, Mario (2011) Product development courses in E-learning environment. = Product development courses in E-learning environment. In: 13th International Conference on Engineering and Product Design Education, E and PDE 2011, 08-09.09.2011., London; United Kingdom.

Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2011) A robot group control based on Bayesian reasoning. = A robot group control based on Bayesian reasoning. In: World Congress on Engineering 2011, WCE 2011, 06-08.07.2011., London, United Kingdom.

Tanackov, Ilija J. and Stojić, Gordan S. and Tepić, Jovan and Kostelac, Milan and Sinani, F and Sremac, Siniša R. (2011) Golden ratio (sectiona aurea) in Markovian ants AI hybrid. = Golden ratio (sectiona aurea) in Markovian ants AI hybrid. In: 2nd International Conference on Adaptive and Intelligent Systems, ICAIS 2011, 06-08.09.2011., Klagenfurt; Austria.

Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2011) Probabilistic approach to robot group control. = Probabilistic approach to robot group control. In: International Conference on Advanced Design and Manufacturing Engineering, ADME 2011, 16-18.09.2011., Guangzhou, China.

Tomić, Denis and Muftić, Osman and Biočić, Berislav (2011) A novel scheduling approach of e-learning content on cloud computing infrastructure. = A novel scheduling approach of e-learning content on cloud computing infrastructure. In: 34th International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2011, 23-27.05.2011., Opatija; Croatia.

Čatić, Igor and Barić, Gordana and Galić, Kata and Grancarić, Ana Marija and Rogić, Ana and Rujnić-Sokele, Maja and Karavanić, Ivor (2011) Draft of the basic systematization of inorganic and organic macromolecular compounds. = Draft of the basic systematization of inorganic and organic macromolecular compounds. In: 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, 01.-05.2011., Boston, MA; United States.

Deur, Joško and Hancock, Matthew and Assadian, Francis (2011) Design and comparative study of yaw rate control systems with various actuators. = Design and comparative study of yaw rate control systems with various actuators. In: SAE 2011 World Congress and Exhibition, 12-14. 4. 2011., Detroit, United States.

Kozarac, Darko and Sjerić, Momir and Ilinčić, Petar (2011) Numerical study of influencing factors and the possibility to use vibe parameters in crank-angle resolved HCCI control models. = Numerical study of influencing factors and the possibility to use vibe parameters in crank-angle resolved HCCI control models. In: SAE 2011 World Congress and Exhibition, 12-14. 4. 2011., Detroit, MI; United States.

Kozmar, Hrvoje (2011) An alternative approach to experimental simulation of wind characteristics in urban environments. = An alternative approach to experimental simulation of wind characteristics in urban environments. In: Urban Environmental Pollution 2010, 20-23.6.2010., Boston, MA; United States.

Pustaić, Dragan and Cajner, Franjo (2011) Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. = Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. In: 6th International Conference "Materials Structure and Micromechanics of Fracture, MSMF-6", 28-30.06.2010., Brno; Czech Republic.

Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Autonomous planning framework for distributed multiagent robotic systems. = Autonomous planning framework for distributed multiagent robotic systems. In: 2nd IFIP WG 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2011, 21-23.02.2011., Costa de Caparica; Portugal.

Schneider, Daniel Rolph and Kirac, Mislav and Hublin, Andrea (2011) Potential of municipal solid waste for reduction of GHG emissions and energy production in Croatia. = Potential of municipal solid waste for reduction of GHG emissions and energy production in Croatia. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.

Ilijevski, Živko and Završki, Ivica and Kitarović, Petra and Anić Vučinić, Aleksandra and Krapinec, Zvonimir and Kelava, Filip (2011) 20 MWel biomass power plant "Koprivnički Ivanec" in Croatia designed to achieve integrated prevention and control of pollution. = 20 MWel biomass power plant "Koprivnički Ivanec" in Croatia designed to achieve integrated prevention and control of pollution. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.

Tepić, Jovan and Kostelac, Milan and Stojić, Gordan S. and Tanackov, Ilija J. and Sremac, Siniša R. (2011) Applying methods to reduce rail wear in the railway systems for environmental protection. = Applying methods to reduce rail wear in the railway systems for environmental protection. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.

Veža, Ivica and Gjeldum, Nikola and Mladineo, Marko and Štefanić, Nedeljko (2011) New product introduction by using Hoshin Kanri. = New product introduction by using Hoshin Kanri. In: 21st International Conference on Production Research: Innovation in Product and Production, ICPR 2011, 31.07.-04.08.2011., Stuttgart; Germany.

Tanackov, Ilija J. and Tepić, Jovan and Kostelac, Milan and Stojić, Gordan S. and Masal, Z (2012) A virtual mass model in train aerodynamics. = A virtual mass model in train aerodynamics. In: Thirteenth International Conference on Design and Operation in Railway Engineering, 11 - 13 September 2012, New Forest, UK.

Pavković, Danijel and Kranjčević, Nenad and Kostelac, Milan and Herold, Zvonko and Deur, Joško (2012) Normal force control for a pin-on-disk tribometer including active or passive suppression of vertical vibrations. = Normal force control for a pin-on-disk tribometer including active or passive suppression of vertical vibrations. In: 2012 IEEE International Conference on Control Applications, CCA 2012, 03-05.10.2012., Dubrovnik, Croatia.

Jemcov, Aleksandar and Jasak, Hrvoje (2012) Entropy stable multi-dimensional dissipation function for the roe scheme on unstructured meshes. = Entropy stable multi-dimensional dissipation function for the roe scheme on unstructured meshes. In: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 09-12.01.2012., Nashville, TN; United States.

Pavković, Neven and Tečec Ribarić, Zlatka and Sviličić, Tamara (2012) Traceability case study on rail vehicle control unit development project. = Traceability case study on rail vehicle control unit development project. In: 12th International Design Conference, DESIGN 2012, 21.-24.05.2012., Dubrovnik; Croatia.

Zvizdić, Davor and Heinonen, Martti and Šestan, Danijel (2012) Primary dew-point generation between 1°C and 60°C at LPM. = Primary dew-point generation between 1°C and 60°C at LPM. In: 20th IMEKO World Congress 2012, 9-14.10. 2012., Busan; South Korea.

Stanković, Tino and Štorga, Mario and Stojić, Ivan and Savšek, Tomaž (2012) Traceability visualisation toolkit. = Traceability visualisation toolkit. In: 12th International Design Conference, DESIGN 2012, 21.-24.05.2012., Dubrovnik; Croatia.

Andrić, Jerolim and Grgić, Mate and Pirić, Karlo and Žanić, Vedran (2012) Structural assessment of innovative design of large livestock carrier. = Structural assessment of innovative design of large livestock carrier. In: 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13-16.09.2011., Genova, Italy.

Škugor, Branimir and Pavković, Danijel and Deur, Joško (2012) A series-parallel hybrid electric vehicle control strategy including instantaneous optimization of equivalent fuel consumption. = A series-parallel hybrid electric vehicle control strategy including instantaneous optimization of equivalent fuel consumption. In: 2012 IEEE International Conference on Control Applications, CCA 2012, 03-05.10.2012., Dubrovnik, Croatia.

Žanić, Vedran and Prebeg, Pero and Čudina, Predrag (2012) Multiattribute decision making methodology for handymax tanker design in the concept design phase-A case study. = Multiattribute decision making methodology for handymax tanker design in the concept design phase-A case study. In: 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13 September - 16 September 2011., Genova, Italy.

Tepeš, Bojan and Kasać, Josip and Deur, Joško (2012) Optimal control of automated transmission engagement process. = Optimal control of automated transmission engagement process. In: 2012 IEEE International Conference on Control Applications, CCA 2012, 03-05.10.2012., Dubrovnik, Croatia.

Cipek, Mihael and Kasać, Josip and Pavković, Danijel and Petrić, Joško and Deur, Joško (2012) Optimization of control variables of a series-parallel hybrid electric power train. = Optimization of control variables of a series-parallel hybrid electric power train. In: 2012 IEEE International Conference on Control Applications, CCA 2012, 03-05.10.2012., Dubrovnik, Croatia.

Škec, Stanko and Štorga, Mario and Stanković, Tino and Marjanović, Dorian (2012) Mapping risks in product development. = Mapping risks in product development. In: 12th International Design Conference, DESIGN 2012, 21.-24.05.2012., Dubrovnik; Croatia.

Milić, Vladimir and Di Cairano, Stefano and Kasać, Josip and Bemporad, Alberto and Šitum, Željko (2012) A numerical algorithm for nonlinear L2-gain optimal control with application to vehicle yaw stability control. = A numerical algorithm for nonlinear L2-gain optimal control with application to vehicle yaw stability control. In: 51st IEEE Conference on Decision and Control, CDC 2012, 10-13.12.2012., Maui, HI; United States.

Župan, Josip and Filetin, Tomislav and Žmak, Irena (2012) Enhancement of heat transfer characteristics of liquid quenchants. = Enhancement of heat transfer characteristics of liquid quenchants. In: 6th International Quenching and Control of Distortion Conference: Quenching Control and Distortion, 09-13.09.2012., Chicago, IL; United States.

Ivančević, Darko and Smojver, Ivica (2012) Multiscale analysis of aeronautical composite structures using High Fidelity Generalized Method of Cells. = Multiscale analysis of aeronautical composite structures using High Fidelity Generalized Method of Cells. In: 6th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, 10-14. 9. 2012., Vienna; Austria.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2011) Comparative analysis of basic procedures for shafting alignment calculation. = Comparative analysis of basic procedures for shafting alignment calculation. In: 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13 September - 16 September 2011., Genova, Italy.

Grgec Bermanec, Lovorka and Martinaga, Marin and Zvizdić, Davor and Šimunović, Vedran (2012) Development of method for determination of pressure balance piston fall rate. = Development of method for determination of pressure balance piston fall rate. In: 20th IMEKO World Congress 2012, 9-14.10. 2012., Busan; South Korea.

Ivanović, Vladimir and Deur, Joško and Tseng, Hongtei Eric (2012) Bond graph model of electromechanical actuation system for a dry dual clutch. = Bond graph model of electromechanical actuation system for a dry dual clutch. In: 10th International Conference on Bond Graph Modeling and Simulation, ICBGM 2012, 8-11.07.2012., Genova; Italy.

Cipek, Mihael and Deur, Joško and Petrić, Joško (2012) Bond graph modeling and power-flow analysis of range extended electric vehicle transmission. = Bond graph modeling and power-flow analysis of range extended electric vehicle transmission. In: 10th International Conference on Bond Graph Modeling and Simulation, ICBGM 2012, 8-11.07.2012., Genova, Italy.

Brezak, Danko and Baček, Tomislav and Majetić, Dubravko and Kasać, Josip and Novaković, Branko (2012) A comparison of feed-forward and recurrent neural networks in time series forecasting. = A comparison of feed-forward and recurrent neural networks in time series forecasting. In: 2012 IEEE Conference on Computational Intelligence for Financial Engineering and Economics, CIFEr 2012, 29-30.03.2012., New York City, NY, United States.

Baček, Tomislav and Kasać, Josip and Majetić, Dubravko and Brezak, Danko (2012) Real-time vehicle navigation in unknown environment with obstacles using analytical fuzzy controller and potential field method. = Real-time vehicle navigation in unknown environment with obstacles using analytical fuzzy controller and potential field method. In: 2012 IEEE International Conference on Fuzzy Systems, FUZZ 2012, 10-15.06.2012., Brisbane, QLD, Australia.

Milić, Vladimir and Bemporad, Alberto and Kasać, Josip and Šitum, Željko (2012) Numerical algorithm for nonlinear state feedback H∞ optimal control problem. = Numerical algorithm for nonlinear state feedback H∞ optimal control problem. In: 2012 20th Mediterranean Conference on Control and Automation, MED 2012, 03-06.07.2012., Barcelona, Spain.

Kasać, Josip and Milić, Vladimir and Novaković, Branko and Majetić, Dubravko and Brezak, Danko (2012) Initial conditions optimization of nonlinear dynamic systems with applications to output identification and control. = Initial conditions optimization of nonlinear dynamic systems with applications to output identification and control. In: 2012 20th Mediterranean Conference on Control and Automation, MED 2012, 03-06.07.2012., Barcelona, Spain.

Jokić, Andrej and Van Den Bosch, P.P.J. and Virag, Ana and Hermans, R.M. (2012) On zonal pricing for congestion management. = On zonal pricing for congestion management. In: 9th International Conference on the European Energy Market, EEM 12, 10-12.05.2012., Florence, Italy.

Virag, Ana and Jokić, Andrej and Lampropoulos, I. and Hermans, R.M. and Van Den Bosch, P.P.J. (2012) An alternative approach for real-time balancing of electrical power systems. = An alternative approach for real-time balancing of electrical power systems. In: 9th International Conference on the European Energy Market, EEM 12, 10-12.05.2012., Florence, Italy.

Senjanović, Ivo and Vladimir, Nikola and Malenica, Šime (2012) Hydroelastic loading and response of ultra large container ships. = Hydroelastic loading and response of ultra large container ships. In: 22nd International Offshore and Polar Engineering Conference, ISOPE-2012, 17-22.06.2012., Rhodes; Greece.

Ćatipović, Ivan and Čorić, Većeslav and Vukčević, Vuko (2012) Dynamics of FPSO with polyester mooring lines. = Dynamics of FPSO with polyester mooring lines. In: 22nd International Offshore and Polar Engineering Conference, ISOPE-2012, 17-22.06.2012., Rhodes; Greece.

Sjerić, Momir and Kozarac, Darko and Bogensperger, Michael (2012) Implementation of a single zone k-ε turbulence model in a multi zone combustion model. = Implementation of a single zone k-ε turbulence model in a multi zone combustion model. In: SAE 2012 World Congress and Exhibition, 24-26.04.2012., Detroit, MI; United States.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Skozrit, Ivica (2011) Modelling of nonlinear creep and recovery behaviour of cortical bone. = Modelling of nonlinear creep and recovery behaviour of cortical bone. In: 10th International Conference on Fracture and Damage Mechanics, FDM2011, 19-21.09.2011., Dubrovnik; Croatia.

Opalić, Milan and Galić, Ivica and Vučković, Krešimir (2012) Influence of the wall thickness on the allowable and failure pressures of two- and tree-way globe valve bodies. = Influence of the wall thickness on the allowable and failure pressures of two- and tree-way globe valve bodies. In: 10th International Conference on Fracture and Damage Mechanics, FDM2011, 19-21.09.2011., Dubrovnik; Croatia.

Valković, Vladivoj and Sudac, Davorin and Kollar, Robert and Domitran, Zoran and Nad, Karlo and Obhođaš, Jasmina (2012) Inspection of the objects on the sea floor for the presence of explosives. = Inspection of the objects on the sea floor for the presence of explosives. In: Detection and Sensing of Mines, Explosive Objects, and Obscured Targets XVII, 23.–27. 04.2012., Baltimore, MD; United States.

Ivančević, Darko and Smojver, Ivica (2012) Multiscale damage analysis of laminated composite structures using generalized method of cells theory and Abaqus. = Multiscale damage analysis of laminated composite structures using generalized method of cells theory and Abaqus. In: 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, 24.-28.06.2012., Venice; Italy.

Liščić, Božidar and Singer, Saša and Beitz, Hartmut (2012) Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces. = Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces. In: 18th International Federation for Heat Treatment and Surface Engineering Congress, IFHTSE 2010, 26-30.07.2010., Rio de Janeiro; Brazil.

Čanžar, Predrag and Tonković, Zdenko and Kodvanj, Janoš (2012) Influence of graphite morphology on the fatigue behaviour of nodular cast iron. = Influence of graphite morphology on the fatigue behaviour of nodular cast iron. In: 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012, 26 - 31.8.2012., Kazan; Russian Federation.

Čanžar, Predrag and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2012) Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. = Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. In: 10th International Conference on Fracture and Damage Mechanics, FDM2011, 19-21.09.2011., Dubrovnik; Croatia.

Van Blarigan, Andrew and Kozarac, Darko and Seiser, Reinhard and Chen, Jyh-Yuan and Cattolica, Robert and Dibble, Robert (2012) Experimental study of methane fuel oxycombustion in an SI engine. = Experimental study of methane fuel oxycombustion in an SI engine. In: ASME 2012 Internal Combustion Engine Division Fall Technical Conference, ICEF 2012, 23-26. 9. 2012., Vancouver, BC; Canada.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Franz, Mladen (2012) Developement of reference vickers hardness blocks by the powder metallurgy process. = Developement of reference vickers hardness blocks by the powder metallurgy process. In: 20th IMEKO World Congress 2012, 9-14.10. 2012., Busan; South Korea.

Pavković, Danijel and Hrgetić, Mario and Komljenović, Ante and Lisac, Anton and Deur, Joško (2013) Battery/ultracapacitor test setup control system design and verification. = Battery/ultracapacitor test setup control system design and verification. In: IEEE EuroCon 2013, 01-04.07.2013., Zagreb.

Šagi, Goran and Lulić, Zoran (2013) Multi-objective optimization in the conceptual phase of vehicle development. = Multi-objective optimization in the conceptual phase of vehicle development. In: 19th ISPE International Conference on Concurrent Engineering, CE 2012, 03-07.09.2012., Trier; Germany.

Alar, Vesna and Juraga, Ivan and Stojanović, Ivan and Šimunović, Vinko and Kapor, Frankica (2013) Electrochemical properties of stainless steels in the seawater. = Electrochemical properties of stainless steels in the seawater. In: European Corrosion Congress, EUROCORR 2013, 01-05.09.2013., Estoril; Portugal.

Lulić, Zoran and Tomić, Rudolf and Ilinčić, Petar and Šagi, Goran and Mahalec, Ivan (2013) Application of reverse engineering techniques in vehicle modifications. = Application of reverse engineering techniques in vehicle modifications. In: 19th ISPE International Conference on Concurrent Engineering, CE 2012, 03-07.09.2012., Trier; Germany.

Žiha, Kalman (2013) Statistical variability vs. probabilistic uncertainty. = Statistical variability vs. probabilistic uncertainty. In: 35th International Conference on Information Technology Interfaces, ITI 2013, 24-27.06.2013., Cavtat / Dubrovnik; Croatia.

Žanić, Vedran and Pirić, Karlo and Kitarović, Stanislav (2013) Reliability and robustness based design attributes for multi-criteria decision making. = Reliability and robustness based design attributes for multi-criteria decision making. In: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013, 09-14.06.2013., Nantes; France.

Terze, Zdravko and Vrdoljak, Milan and Zlatar, Dario (2013) Dynamic simulation of helicopter airborne maneuvers with numerical integration scheme in Lie-group setting. = Dynamic simulation of helicopter airborne maneuvers with numerical integration scheme in Lie-group setting. In: ECCOMAS Thematic Conference on Multibody Dynamics 2013, 01-04.07.2013., Zagreb; Croatia.

Matijašević, Dubravko and Terze, Zdravko (2013) An approach for the spatial coupling of multibody system chain in a partitioned algorithm. = An approach for the spatial coupling of multibody system chain in a partitioned algorithm. In: ECCOMAS Thematic Conference on Multibody Dynamics 2013, 01-04.07.2013., Zagreb; Croatia.

Terze, Zdravko and Müller, Andreas and Zlatar, Dario (2013) Angular momentum conserving integration scheme for multibody system dynamics in Lie-group setting. = Angular momentum conserving integration scheme for multibody system dynamics in Lie-group setting. In: ECCOMAS Thematic Conference on Multibody Dynamics 2013, 01-04.07.2013., Zagreb; Croatia.

Zvizdić, Davor and Šestan, Danijel (2013) Hysteresis of thin film IPRTs in the range 100 °c to 600 °c. = Hysteresis of thin film IPRTs in the range 100 °c to 600 °c. In: 9th International Temperature Symposium on Temperature: Its Measurement and Control in Science and Industry, ITS 2012, 19-23.03.2013., Los Angeles, CA; United States.

Zvizdić, Davor and Šestan, Danijel (2013) Tin-filled multi-entrance fixed point. = Tin-filled multi-entrance fixed point. In: 9th International Temperature Symposium on Temperature: Its Measurement and Control in Science and Industry, ITS 2012, 19-23.03.2013., Los Angeles, CA; United States.

Rudan, Smiljko and Aščić, Blanka and Višić, Ivan (2013) Crashworthiness study of LPG ship with type C tanks. = Crashworthiness study of LPG ship with type C tanks. In: 6th International Conference on Collision and Grounding of Ships and Offshore Structures, ICCGS 2013, 17-19.06.2013., Trondheim; Norway.

Ćorak, Maro and Parunov, Joško and Guedes Soares, Carlos (2013) Long-term prediction of combined wave and whipping bending moments of containership. = Long-term prediction of combined wave and whipping bending moments of containership. In: 4th International Conference on Marine Structures, MARSTRUCT 2013, 25-27.03.2013., Espoo; Finland.

Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung (2013) Simplified formulations of mass and geometric stiffness matrices in vibration and stability analyses of thin-walled structures. = Simplified formulations of mass and geometric stiffness matrices in vibration and stability analyses of thin-walled structures. In: 4th International Conference on Marine Structures, MARSTRUCT 2013, 25-27.03.2013., Espoo; Finland.

Terze, Zdravko and Vrdoljak, Milan and Zlatar, Dario (2013) Numerical flight vehicle forward dynamics with state-space lie-group integration scheme. = Numerical flight vehicle forward dynamics with state-space lie-group integration scheme. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2013, 04-07.08.2013., Portland, OR; United States.

Božić, Željko and Schmauder, Siegfried and Mlikota, Marijo and Hummel, Martin (2013) Fatigue crack growth modelling in welded stiffened panels under cyclic tension. = Fatigue crack growth modelling in welded stiffened panels under cyclic tension. In: 13th International Conference on Fracture 2013, ICF 2013, 16-21.06.2013., Beijing; China.

Terze, Zdravko and Mueller, Andreas and Zlatar, Dario (2013) Störmer-Verlet integration scheme for multibody system dynamics in lie-group setting. = Störmer-Verlet integration scheme for multibody system dynamics in lie-group setting. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2013, 04-07.08.2013., Portland, OR; United States.

Müller, Andreas and Terze, Zdravko (2013) Is there an optimal choice of configuration space for lie group integration schemes applied to constrained MBS? = Is there an optimal choice of configuration space for lie group integration schemes applied to constrained MBS? In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2013, 04-07.08.2013., Portland, OR; United States.

Boldyryev, Stanislav and Krajačić, Goran (2015) Energy efficiency and carbon footprint reduction for Croatian regions by Total Site integration. = Energy efficiency and carbon footprint reduction for Croatian regions by Total Site integration. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Rauch, Martina and Galović, Antun and Virag, Zdravko (2015) Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency. = Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Horvat, Ivan and Dović, Damir (2015) New method for calculating hourly energy need in HVAC systems. = New method for calculating hourly energy need in HVAC systems. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Rodić, Alan (2015) Pristup modelskom prediktivnom upravljanju KGH sustavima u zgradama. = Approach to model predictive control of HVAC in buildings. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Cukrov, Alen and Tuković, Željko and Galović, Antun (2015) Towards a Moving Mesh Numerical Simulation of a Heated Solid Immersion into Liquid. = Towards a Moving Mesh Numerical Simulation of a Heated Solid Immersion into Liquid. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Pasanec, Josip and Ferdelji, Nenad (2015) Spiralni izmjenjivači topline u kompaktnim parnim toplinskim stanicama. = Helical Heat Exchangers in Compact District Heating Substations. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Švaić, Vjeran and Lukenda, Željko and Županić, Danijel and Bolarić, Antonio and Jurinjak, Bojan (2015) Dynamics of skin temperature of the knees during physical exercise measured by infrared thermography. = Dynamics of skin temperature of the knees during physical exercise measured by infrared thermography. In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.

Berković-Šubić, Mihaela and Boras, Ivanka and Tonković, Zdenko and Kodvanj, Janoš and Švaić, Srećko and Rodić, Alan and Surjak, Martin and Plačko, Gordan and Frančeski, Joško (2015) Primjena infracrvene termografije kod mehaničkog ispitivanja materijala. = In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.

Županić, Doris and Bolarić, Antonio and Stančić, Mia and Piljek, Denis and Jurinjak, Bojan (2015) Thermal imaging of the outer surface of the Laboratory for engines and vehicles at the Faculty of mechanical engineering and naval architecture. = Thermal imaging of the outer surface of the Laboratory for engines and vehicles at the Faculty of mechanical engineering and naval architecture. In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.

Žiha, Kalman and Kodvanj, Janoš and Ljubenkov, Boris and Bakić, Ante (2012) Značaj eksperimentalne mehanike u brodogradnji. = Importance of experimental mechanics in shipbuilding. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Rudan, Smiljko and Urem, Jure and Zaninović, Ante (2012) Usporedba metoda za procjenu porinuća broda. = Comparison of ship launching evaluation methods. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Burazer, Ivan and Šestan, Ante and Ančić, Ivica and Vladimir, Nikola (2012) Hibridni energetski sustav malog putničkog broda. = Hybrid power system of a small passenger ship. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Čižmek, Zrinka and Degiuli, Nastia (2012) Procjena otpora glisera u mirnoj vodi. = Evaluation of resistance of planing hulls in smooth water. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Varda, Nenad and Degiuli, Nastia and Pedišić Buča, Marta (2012) Procjena otpora poludeplasmanskih brodova sa zrcalnom krmom. = Resistance prediction of semiplaning transom stern hulls. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Vukčević, Vuko and Werner, Andreja and Degiuli, Nastia (2012) SPH simulacija Poiseulleovog strujanja pri niskim Reynoldsovim brojevima. = SPH simulation of Poiseuille flow at low Reynolds numbers. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2012) EEDI kao mjera energetske učinkovitosti broda. = EEDI as a criterion of ships energy efficiency. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Žanić, Vedran and Andrić, Jerolim and Hadžić, Neven (2012) Strukturna optimizacija broda za prijevoz ukapljenog prirodnog plina. = Structural optimization of LNG carrier. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Reljić, Marin and Andrić, Jerolim and Žuvela, Domagoj (2012) Projektiranje konstrukcije putničkog katamarana. = Structural design of passenger catamaran. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Kitarović, Stanislav and Žanić, Vedran (2012) Ekstremno savijanje tankostjenih kutijastih nosača: Analize progresivnog kolapsa. = Extreme Bending of Stiffened Box-girders: Progressive collapse analyses. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Senjanović, Ivo and Vladimir, Nikola and Hadžić, Neven (2012) Analiza čvrstoće velikih kontejnerskih brodova grednim modelom prema klasifikacijskim pravilima. = Strength analysis of large container ships by using a beam model according to the classification rules. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Žuvela, Domagoj and Varda, Nenad and Senjanović, Ivo (2012) Konceptualno projektiranje cilindričnog dijela čvrstog trupa podmornice. = Conceptual design of cylindrical part of inner submarine hull. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Varda, Nenad and Čižmek, Zrinka and Ćorak, Maro and Parunov, Joško (2012) Neizvjesnost određivanja dinamičke izdržljivosti kontejnerskih brodova. = Uncertainty in hull girder fatigue assessment of containership. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Čorić, Većeslav and Ćatipović, Ivan and Radanović, Jadranka (2012) Polaganje podmorskih cjevovoda u obalnom području. = Subsea pipe laying in coastal area. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Vujasinović, Jasenko and Parunov, Joško and Ćorak, Maro and Buić, Vesna and Radolović, Vito (2012) Strukturna analiza usisnog jaružala sa skladištem. = Structural analysis of hopper suction dredger. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Žiha, Kalman (2012) Tehnička etika. = Technical ethics. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Martić, Ivana and Degiuli, Nastia and Munić, Ivan (2014) Istraživanje utjecaja dinamičke oplakane površine na otpor poludeplasmanske forme. = An investigation into the effect of dynamic wetted surface area on the resistance of semi-planing hull. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Tomić, Denis and Degiuli, Nastia (2014) Približna metoda proračuna ukupnog otpora glisera. = An approximate method for total resistance calculation of the planing hulls. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Šalamon, Mateja and Degiuli, Nastia (2014) Eksperimentalno određivanje otpora serije brzih poludeplasmanskih katamarana. = Experimental determination of resistance of high speed semi-displacement catamaran series. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Vukčević, Vuko and Jasak, Hrvoje (2014) OpenFOAM u brodskoj hidrodinamici. = OpenFOAM in Marine Hydrodynamics. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2014) Simulacija udarnih valnih opterećenja u OpenFOAM-u. = Simulation of Wave Impact Loads in OpenFOAM. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Tomić, Marko and Senjanović, Ivo and Ćatipović, Ivan (2014) Polu-spregnuta analiza dinamičkog odziva plutajućeg tijela i sidrenih linija pritegnutih pučinskih platformi. = Floater-tether semi-coupled dynamic response analysis of tension leg platforms. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Šabalja, Tomislav and Senjanović, Ivo and Hadžić, Neven (2014) Projektiranje konstrukcije podmornice klase Typhoon. = Structural design of a Typhoon class submarine. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Andrić, Jerolim and Kitarović, Stanislav and Plavšić, Maja and Žarko, Ana (2014) Uzdužna granična čvrstoća oštećenog trupa tankera. = Hull girder ultimate strength of a damaged oil tanker. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Kitarović, Stanislav and Andrić, Jerolim and Pirić, Karlo and Mikulić, Antonio (2014) Mogućnosti povećanja smične nosivosti ploča u analizi i sintezi brodskih konstrukcija. = Magnification of the plate shear load capacity in analysis and synthesis of the ship structures. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Bužančić Primorac, Branka and Parunov, Joško and Žiha, Kalman (2014) Vjerojatnosni model smanjenja granične čvrstoće oštećenog nasukanog broda. = Probabilistic model of ultimate strength reduction of grounded ship. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Bužančić Primorac, Branka and Parunov, Joško and Žiha, Kalman (2014) Utjecaj bočnog nagiba na granični moment savijanja oštećenog broda. = Influence of the heeling angle on ultimate bending capacity of damaged ship. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Jurišić, Paul and Parunov, Joško (2014) Granična čvrstoća trupa korodiranih naftnih tankera. = Hull girder ultimate strength of aging oil tankers. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Parunov, Joško and Ćorak, Maro and Žiha, Kalman and Radanović, Jadranka (2014) Pregled gamma funkcija kod akumuliranog proračuna zamora brodskih konstrukcija. = Review of gamma functions in accumulated fatigue damage assessment of ship structures. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Rožić, Filip and Rudan, Smiljko (2014) Strukturna analiza kućišta kolotura na jaružaru s grabilicom. = Structural analysis of guide sheave housing on backhoe dredger. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Mudronja, Luka and Ćorak, Maro and Parunov, Joško and Vidan, Pero and Malenica, Šime (2014) Numerička analiza operativnosti kontejnerskog broda na valovitom moru te utjecaj upravljanja na valna opterećenja. = Numerical evaluation of operability envelope for ultra large container ship in extreme seas and influence of maneuvering on wave loads. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Belamarić, Branko and Žanić, Vedran and Prebeg, Pero (2014) Višeciljno donošenje odluke o strategiji održavanja broda uzimajući u obzir utjecaj na okoliš. = Multiattribute decision making methodology for maintenance strategy with ecological considerations. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Hadžić, Neven and Tomić, Marko and Senjanović, Ivo and Vladimir, Nikola (2014) Pregled pučinskih obnovljivih izvora energije. = An overview of offshore renewable energy resources. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Katalinić, Marko and Parunov, Joško (2014) Pregled klimatskih prilika u Jadranskom moru. = Review of climatic conditions in the Adriatic Sea. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Hadžić, Neven and Ćorak, Maro and Parunov, Joško and Žiha, Kalman (2010) Računske neizvjesnosti modeliranja pouzdanosti brodskog trupa. = Computational uncertainties of ship hull girder reliability modelling. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Adum, Ivan and Slapničar, Vedran and Gugić, Danko (2010) Ekonomska mjerila kao kriterij u osnivanju broda. = Measures of merit as criteria in ship design. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko and Hadžić, Neven (2010) Hidroelastični odziv velikog kontejnerskog broda. = Hydroelastic response of a Large Container Ship. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda, Korčula.

Ljubenkov, Boris and Mihailović, Mladen and Sladoljev, Želimir and Zaplatić, Tomislav and Žiha, Kalman Konceptualni projekt brodogradilišta na Dunavu. = Conceptual design of shipyard on the river Danube. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Jurišić, Paul and Parunov, Joško (2010) Dugoročno predviđanje globalnih istrošenja trupa tankera. = Long-term prediction of global corrosion wastage of oil tankers. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Ljubičić, Petar and Kodvanj, Janoš and Ljubenkov, Boris (2010) Mehanička svojstva nehrđajućeg čelika pri niskim temperaturama. = Mechanical characteristics of the stainless steel at sub-zero temperatures. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Gugić, Danko and Slapničar, Vedran and Adum, Ivan (2010) Primjena ekonomskih mjerila vrsnoće u osnivanju broda. = Application of economic criteria of merit in ship design. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Andrić, Jerolim and Žanić, Vedran and Sponza, Dino and Dundara, Djani and Radolović, Vito and Grgić, Mate and Pirić, Karlo and Stipčević, Marko (2010) Strukturna analiza broda za prijevoz žive stoke. = Structural Analysis of Livestock Carrier. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Žiha, Kalman and Parunov, Joško and Ćorak, Maro (2010) Preispitivanje zajedničkih propisa za procjenu granične čvrstoće brodskog trupa. = The CSR ship hull girder ultimate strength check procedure revisited. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Parunov, Joško and Ćorak, Maro (2010) Primjena NMKE u projektiranju konstrukcije brodova za plovidbu u ledu. = Use of NFEM in structural design of ships with ice notation. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Krajna, Tamara and Žiha, Kalman (2010) Znanstveno i stručno izdavaštvo u hrvatskoj brodogradnji. = Scientific and professional publishing in croatian shipbuilding. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Dundara, Đani and Kuzmanović, Obrad and Žanić, Vedran and Andrić, Jerolim and Prebeg, Pero (2010) Novi inovativni projekt RoPax broda. = New Innovative Design of RoPax Ship. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Katić, Višnja and Špalj, Stjepan and Opalić, Milan and Domitran, Zoran (2014) Design of orthodontic mini-implants contributing to implantation torque. = Design of orthodontic mini-implants contributing to implantation torque. In: 2nd International Conference on Biodental Engineering, BIODENTAL 2012, 07-08.12.2012., Porto; Portugal.

Katić, Višnja and Špalj, Stjepan and Leder Horina, Jasna and Vikić-Topić, Dražen (2014) Impact of fluoride agents on mechanical properties of orthodontic wires. = Impact of fluoride agents on mechanical properties of orthodontic wires. In: 2nd International Conference on Biodental Engineering, BIODENTAL 2012, 07-08.12.2012., Porto; Portugal.

Bužančić Primorac, Branka and Parunov, Joško (2014) Reduction of the ultimate strength due to crack propagation in damaged ship structure. = Reduction of the ultimate strength due to crack propagation in damaged ship structure. In: 15th International Congress of the International Maritime Association of the Mediterranean, IMAM 2013;, 14-17.10.2013., A Coruna, Spain.

Cajner, Franjo and Leskovšek, Vojteh and Pustaić, Dragan (2014) Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. = Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.

Pustaić, Dragan and Cajner, Franjo (2014) Influence of heat treatment on crack tip opening displacement and on resistance of crack propagation of alloyed steel. = Influence of heat treatment on crack tip opening displacement and on resistance of crack propagation of alloyed steel. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.

Kram, Mateja and Tošanović, Nataša and Hegedić, Miro (2014) Kaizen approach to supply chain management: First step for transforming supply chain into lean supply chain. = Kaizen approach to supply chain management: First step for transforming supply chain into lean supply chain. In: 12th International Conference on Industrial Logistics, ICIL 2014, 11-13.06.2014, Bol, Brač; Croatia.

Pavković, Danijel and Smetko, Viktor and Hrgetić, Mario and Komljenović, Ante (2014) Dual Kalman filter-based SoC/SoH estimator for an ultracapacitor module. = Dual Kalman filter-based SoC/SoH estimator for an ultracapacitor module. In: 2014 IEEE Conference on Control Applications, CCA 2014, 08-10.10.2014., Juan Les Antibes, France.

Lončar, Dražen and Guzović, Zvonimir and Šerman, Nikola (2014) Performance improvement of biomass cogeneration plant by dual loop organic rankine cycle. = Performance improvement of biomass cogeneration plant by dual loop organic rankine cycle. In: 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2014, 23.-27.08.2014., Prague; Czech Republic.

Ćatipović, Ivan and Degiuli, Nastia and Werner, Andreja and Čorić, Većeslav and Radanović, Jadranka (2014) Numerical model of towing line in sea transport. = Numerical model of towing line in sea transport. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Taritaš, Ivan and Kozarac, Darko and Sjerić, Momir (2014) Numerical study of boosting configurations and valve strategies for high load HCCI engine in wide range of engine speed. = Numerical study of boosting configurations and valve strategies for high load HCCI engine in wide range of engine speed. In: SAE 2014 World Congress and Exhibition, 08.-10.04.2014., Detroit, MI; United States.

Vukčević, Vuko and Jasak, Hrvoje (2014) A Conservative Level Set method for interface capturing in two-phase flows. = A Conservative Level Set method for interface capturing in two-phase flows. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Jasak, Hrvoje and Rigler, Damir and Tuković, Željko (2014) Design and implementation of Immersed Boundary Method with discrete forcing approach for boundary conditions. = Design and implementation of Immersed Boundary Method with discrete forcing approach for boundary conditions. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Ivančević, Darko and Smojver, Ivica (2014) Micromechanical failure modelling of composite materials using HFGMC. = Micromechanical failure modelling of composite materials using HFGMC. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Opetuk, Tihomir and Tošić, Marina and Đukić, Goran and Šolaja, Julio (2014) Storage system with movable racks - A case study. = Storage system with movable racks - A case study. In: 12th International Conference on Industrial Logistics, ICIL 2014, 11-13.06.2014., Bol, Brač; Croatia.

Krizmanić, Severino and Virag, Zdravko and Šavar, Mario (2014) A rapidly convergent algorithm for the solution of Navier-Stokes equations. = A rapidly convergent algorithm for the solution of Navier-Stokes equations. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Staroveški, Tomislav and Brezak, Danko and Grđan, Vinko and Baček, Tomislav (2014) Medical drill wear classification using servomotor drive signals and neural networks. = Medical drill wear classification using servomotor drive signals and neural networks. In: World Congress on Engineering, WCE 2014, 02-04.07.2014., London, United Kingdom.

Milić, Vladimir and Kasać, Josip and Šitum, Željko (2014) A Newton-like algorithm for L2-gain optimal control of an electro-hydraulic servo-system. = A Newton-like algorithm for L2-gain optimal control of an electro-hydraulic servo-system. In: 22nd Mediterranean Conference on Control and Automation, MED 2014, 16-19.06.2014., Palermo, Italy.

Skozrit, Ivica and Tonković, Zdenko and Kodvanj, Janoš (2014) The creep and fracture behaviour of the polyethylene PE100. = The creep and fracture behaviour of the polyethylene PE100. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2014) Free vibration analysis of rectangular plates with multiple rectangular openings and arbitrary edge constraints. = Free vibration analysis of rectangular plates with multiple rectangular openings and arbitrary edge constraints. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Švaco, Marko and Šekoranja, Bojan and Šuligoj, Filip and Jerbić, Bojan (2014) Calibration of an industrial robot using a stereo vision system. = Calibration of an industrial robot using a stereo vision system. In: 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013, 23.-26.10.2013., Zadar, Hrvatska.

Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Župan, Josip (2014) Selection of optimal conditions for immersion quenching. = Selection of optimal conditions for immersion quenching. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Jasak, Hrvoje and Gatin, Inno and Vukčević, Vuko (2014) Numerical simulation of wave loading on static offshore structures. = Numerical simulation of wave loading on static offshore structures. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Župan, Josip and Filetin, Tomislav and Landek, Darko (2014) Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles. = Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Aleksandrov Fabijanić, Tamara and Franz, Mladen and Alar, Željko (2014) Hardness uniformity of vickers hardness blocks for the high hardness range. = Hardness uniformity of vickers hardness blocks for the high hardness range. In: 12th IMEKO TC5 Conference on the Measurement of Hardness 2014, 03-06.02.2014., Cape Town; South Africa.

Korade, Ivan and Virag, Zdravko and Šavar, Mario (2014) Numerical simulation of one-dimensional flow in elastic and viscoelastic branching tube. = Numerical simulation of one-dimensional flow in elastic and viscoelastic branching tube. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2014) Boundary conditions in a multiscale homogenization procedure. = Boundary conditions in a multiscale homogenization procedure. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

Škugor, Branimir and Ranogajec, Vanja and Deur, Joško (2014) On smoothing HEV/EREV supervisory control action using an extended ECMS approach. = On smoothing HEV/EREV supervisory control action using an extended ECMS approach. In: 27th World Electric Vehicle Symposium and Exhibition, EVS 2014, 17-20.11.2013., Barcelona; Spain.

Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung and Choi, Tae Muk (2014) Vibration analysis of thick plates - Analytical and numerical approaches. = Vibration analysis of thick plates - Analytical and numerical approaches. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Pavković, Danijel and Lobrović, Mihael and Hrgetić, Mario and Komljenović, Ante and Smetko, Viktor (2014) Battery current and voltage control system design with charging application. = Battery current and voltage control system design with charging application. In: 2014 IEEE Conference on Control Applications, CCA 2014, 08-10.10.2014., Juan Les Antibes, France.

Sjerić, Momir and Kozarac, Darko and Taritaš, Ivan (2014) Experimentally supported modeling of cycle-to-cycle variations of Si engine using cycle-simulation model. = Experimentally supported modeling of cycle-to-cycle variations of Si engine using cycle-simulation model. In: SAE 2014 World Congress and Exhibition, 08.-10.04.2014., Detroit, MI; United States.

Rudan, Smiljko and Aščić, Blanka (2014) Crashworthiness of type C tanks in LPG ship. = Crashworthiness of type C tanks in LPG ship. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Christoforidis, Georgios and Papagiannis, Grigoris and Brain, Mike and Pukšec, Tomislav (2014) Establishing an assessment framework for energy sustainability in prisons: The E-SEAP project. = Establishing an assessment framework for energy sustainability in prisons: The E-SEAP project. In: 14th International Conference on Environment and Electrical Engineering, EEEIC 2014, 10-12.05.2014., Krakow; Poland.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Slokar, Ljerka (2014) Cyclic creep and recovery behaviour of glass fibre reinforced epoxy composite. = Cyclic creep and recovery behaviour of glass fibre reinforced epoxy composite. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

Smojver, Ivica and Ivančević, Darko (2010) Bird impact at aircraft structure-Damage analysis using Coupled Euler Lagrangian Approach. = Bird impact at aircraft structure-Damage analysis using Coupled Euler Lagrangian Approach. In: 9th World Congress on Computational Mechanics, WCCM 2010, 19.-23.07.2010., Sydney; Australia.

Šekoranja, Bojan and Bašić, Denis and Švaco, Marko and Šuligoj, Filip and Jerbić, Bojan (2014) Human-robot interaction based on use of capacitive sensors. = Human-robot interaction based on use of capacitive sensors. In: 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013, 23.-26.10.2013., Zadar, Hrvatska.

Žanić, Vedran and Pirić, Karlo and Prebeg, Pero (2014) Ship structural design support methodology for the reliability based design optimization (RBDO). = Ship structural design support methodology for the reliability based design optimization (RBDO). In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Cajner, Franjo and Landek, Darko and Kumić, Ivan and Kovačić, Saša and Rafael, Hrvoje (2014) Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. = Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Bakić, Ante (2014) A constitutive model for bovine cortical bone under cyclic creep-recovery loading. = A constitutive model for bovine cortical bone under cyclic creep-recovery loading. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

Baršić, Gorana and Mahović, Sanjin and Katić, Marko and Šimunović, Vedran (2014) Long term stability of silicon roughness standards. = Long term stability of silicon roughness standards. In: 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, 02-06.06.2014., Dubrovnik; Croatia.

Klaić, Miho and Staroveški, Tomislav and Udiljak, Toma (2014) Tool wear classification using decision trees in stone drilling applications: A preliminary study. = Tool wear classification using decision trees in stone drilling applications: A preliminary study. In: 2013 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 23-26.10.2013., Zadar; Croatia.

Midžić, Ida and Štorga, Mario and Marjanović, Dorian (2014) Energy quality hierarchy and "transformity" in evaluation of product's working principles. = Energy quality hierarchy and "transformity" in evaluation of product's working principles. In: 21st CIRP Conference on Life Cycle Engineering, 18-20.06.2014., Trondheim, Norway.

Đigaš, Ana and Ćorak, Maro and Parunov, Joško (2012) Usporedba programskih alata za linearnu analizu pomorstvenosti kontejnerskih brodova. = Comparison of linear seakeeping tools for containerships. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Krajna, Tamara and Mišetić, Marijana and Matković Mikulčić, Katica (2015) The activities of the Croatian Library Association in the field of lifelong education and professional development for library and information professionals. = The activities of the Croatian Library Association in the field of lifelong education and professional development for library and information professionals. In: The 5th Colloquium of Library and Information Experts of V4+ Countries, 08-09.06.2015., Bratislava; Slovakia.

Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 21st International DAAAM Symposium, 20-23.10.2010., Zadar; Croatia.

Kožuh, Zoran and Kralj, Slobodan and Eržišnik, Jadranka (2010) Safety in underwater welding. = Safety in underwater welding. In: Welding and Joining 2010 International Conference, 25-26.01.2010., Tel Aviv; Izrael.

Kunica, Zoran (2010) Dialectics in automatic production. = Dialectics in automatic production. In: International Scientific Conference Management of Technology – Step to Sustainable Production 2010, 02-04.06.2010., Rovinj, Croatia.

Mićić Hot, Jadranka (2010) Some recent results about Jensen's operator inequality and its converses with application to operator means. = Some recent results about Jensen's operator inequality and its converses with application to operator means. In: International Conference on Mathematical Inequalities and Applications 2010 (MIA 2010), 07-13.03.2010., Lahore; Pakistan.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. In: 10th International Scientific Conference New Ways in Manufacturing Technologies, 17-19. 06. 2010., Prešov; Slovakia.

Muftić, Osman and Jurčević Lulić, Tanja (2010) Harmonical distribution of segmental masses of human body. = Harmonical distribution of segmental masses of human body. In: 4th International Ergonomics Conference, 30.06.-03.07.2010., Stubičke Toplice; Croatia.

Katić, Marko and Mudronja, Vedran and Šimunović, Vedran (2010) Edge detection uncertainty in fringe analysis. = Edge detection uncertainty in fringe analysis. In: The 21ST DAAAM World Symposium, "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23.10.2010., Zadar, Croatia.

Šimunović, Vedran and Mudronja, Vedran and Katić, Marko (2010) Stability of roundness measurement system. = Stability of roundness measurement system. In: The 21ST DAAAM World Symposium, "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23.10.2010., Zadar, Croatia.

Jasak, Hrvoje and Tuković, Željko (2010) Dynamic Mesh Handling in OpenFOAM Applied to Fluid-Structure Interaction Simulations. = Dynamic Mesh Handling in OpenFOAM Applied to Fluid-Structure Interaction Simulations. In: V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010, 14-17.06.2010., Lisbon; Portugal.

Kissling, Kathrin and Springer, Julia and Jasak, Hrvoje and Schutz, Steffen and Urban, Karsten and Piesche, Manfred (2010) A coupled pressure based solution algorithm based on the volume-of-fluid approach for two or more immiscible fluids. = A coupled pressure based solution algorithm based on the volume-of-fluid approach for two or more immiscible fluids. In: V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010, 14-17.06.2010., Lisbon; Portugal.

Alujević, Neven and Wolf, Hinko and Gardonio, Paolo (2010) Stability and performance limits for the active vibration isolation on a 2 DOF system using a reactive force actuator and velocity feedback. = Stability and performance limits for the active vibration isolation on a 2 DOF system using a reactive force actuator and velocity feedback. In: International Conference on Noise and Vibration Engineering, 20-22.09.2010., Leuven; Belgium.

Babić, Anita and Cajner, Hrvoje and Šakić, Nikola (2010) Using historical data analysis in problems of mixtures. = Using historical data analysis in problems of mixtures. In: 2nd International Scientific Conference Management of Technology - Step to Sustainable Production, 02-04.06.2010., Rovinj; Croatia.

Van Den Bosch, Paul P.J. and Jokić, Andrej and Hermans, Ralph M. and Frunt, Jasper and Kling, W.L. and Nobel, Frank A. and Boonekamp, Piet and De Boer, Wouter W. (2010) Reduced risks and improved economic operation of ancillary services. = Reduced risks and improved economic operation of ancillary services. In: IEEE International Conference on the European Energy Market 2010 (EEM2010), 23-25.06.2010., Madrid, Spain.

Brezak, Danko and Majetić, Dubravko and Udiljak, Toma and Staroveški, Tomislav (2010) Filtration of estimated flank wear widths using recurrent neural network in the tool wear regulation process. = Filtration of estimated flank wear widths using recurrent neural network in the tool wear regulation process. In: CIRP ICME ’10 - 7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 23-25.06.2010., Capri, Italy.

Budić, Ivan and Novoselović, Daniel and Bauer, Branko and Mance, Ines (2010) Određivanje zaostalih naprezanja u rešetkastoj probi. = Determination of residual stresses in stress lattice. In: 2nd International conference VALLIS AUREA Focus on: Regional development, 03.09.2010., Požega; Croatia.

Ciglar, Damir and Udiljak, Toma and Staroveški, Tomislav and Balder, Damir (2010) Granična proizvodnost postupka brušenja. = Limited Grinding Productivity. In: 2nd International conference VALLIS AUREA Focus on: Regional development, 03.09.2010., Požega; Croatia.

Čanžar, Predrag and Kodvanj, Janoš and Bakić, Ante and Tomičević, Zvonimir and Surjak, Martin (2010) Fatigue crack growth in aluminium alloy AlCu5BiPb. = Fatigue crack growth in aluminium alloy AlCu5BiPb. In: 27st Danubia-Adria Symposium on Advances in Experimental Mechanics, 22-25.09.2010, Wroclaw; Poland.

Ćosić, Predrag and Lisjak, Dragutin and Antolić, Dražen (2010) Multiobjective optimization in process planning. = Multiobjective optimization in process planning. In: International conference flexible automation and intelligent manufacturing, 12-14.07.2010., San Francisco; USA.

Ćosić, Predrag and Lisjak, Dragutin and Antolić, Dražen (2010) Multiobjective Optimization : Support In Production Improvement. = Multiobjective Optimization : Support In Production Improvement. In: Conference Advances in Materials and Processing Technologies, 24.-27.10.2010., Paris; France.

Ćosić, Boris and Krajačić, Goran and Duić, Neven (2010) Estimation of Used Cooking Oil Potential for Biofuels Production in Republic of Croatia. = Estimation of Used Cooking Oil Potential for Biofuels Production in Republic of Croatia. In: Energy and Climate 2010, 18-22.10.2010., Opatija; Croatia.

Ćosić, Boris and Stanić, Zoran and Duić, Neven (2010) Technical potential and geographic distribution of biomass for energy use: A case study of Croatia. = Technical potential and geographic distribution of biomass for energy use: A case study of Croatia. In: 2. konferencija Održivi razvoj i klimatske promene, 13-15.09.2010., Niš; Serbia.

Ćosić, Boris and Stojanović, Branislav and Stefanović, Gordana and Duić, Neven (2010) Potential, regional distribution and the cost of delivered biomass at the power plant location: A case study of the Republic of Serbia. = Potential, regional distribution and the cost of delivered biomass at the power plant location: A case study of the Republic of Serbia. In: 2. konferencija Održivi razvoj i klimatske promene, 13-15.09.2010., Niš; Serbia.

Ćosić, Predrag and Lisjak, Dragutin and Antolić, Dražen (2010) Using Multicriteria Optimization in Process Planning. = Using Multicriteria Optimization in Process Planning. In: 3rd International Conference for Entrepreneurship, Innovation and Regional Development, 27-29.05.2010., Novi Sad; Serbia.

Ćosić, Predrag and Lisjak, Dragutin and Antolić, Dražen (2010) Investigation of Using Multicriteria Optimization in Process Planning. = Investigation of Using Multicriteria Optimization in Process Planning. In: MOTSP2010, 2nd International Scientific Conference Management of Technology – Step to Sustainable Production, 02.-04.06.2010., Rovinj; Croatia.

Ćurko, Ante and Smoljan, Darko and Balen, Igor (2010) Simulacija strujanja zraka u sobi ventiliranoj vrtložnim stropnim difuzorima. = Airflow simulation in a room ventilated with ceiling vortex diffusers. In: Međunarodni kongres Energija i okoliš 2010, 18-22.10.2010., Opatija; Croatia.

Ćurković, Lidija (2010) Depth Profile Analysis of Ni-P coating by Glow Discharge Optical Emmission Specrometry. = Depth Profile Analysis of Ni-P coating by Glow Discharge Optical Emmission Specrometry. In: 10th International Foundrymen Conference-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Ćurković, Lidija and Ćorić, Danko (2010) Load dependence of knoop hardness for SiC ceramics. = Load dependence of knoop hardness for SiC ceramics. In: 42nd International October Conference on Mining and Metallurgy, 10-13.10.2010., Kladovo; Serbia.

Ćurković, Lidija and Kumić, Ivan and Grilec, Krešimir (2010) SEM analysis of erosion mehanisms of alumina ceramics. = SEM analysis of erosion mehanisms of alumina ceramics. In: 42nd International October Conference on Mining and Metallurgy, 10-13.10.2010., Kladovo; Serbia.

Ćurković, Lidija and Ljubas, Davor and Marinović, Veronika (2010) Characterization of TiO2 films prepared by sol-gel method. = Characterization of TiO2 films prepared by sol-gel method. In: 42nd International October Conference on Mining and Metallurgy, 10-13.10.2010., Kladovo; Serbia.

Ćurković, Lidija and Šegota, Suzana and Ljubas, Davor and Svetličić, Vesna (2010) Preparation and characterization of sol-gel TiO2 films by Atomic Force Microscopy. = Preparation and characterization of sol-gel TiO2 films by Atomic Force Microscopy. In: International conference on materials, tribology, recycling, MATRIB 2110, 23-25.06.2010., Vela Luka; Croatia.

Dekker, Gerben and Jokić, Andrej and Weiland, Siep (2010) Distributed H∞-based control of electrical power systems. = Distributed H∞-based control of electrical power systems. In: 2nd IFAC Workshop on Distributed Estimation and Control in Networked Systems, NecSys'10, 13-14.09.2010., Annecy, France.

Dubreta, Nikša (2010) Sustainability Within Non-technical Field of Engineering Education. = Sustainability Within Non-technical Field of Engineering Education. In: MOTSP 2010, 02-04. 06. 2010., Rovinj; Croatia.

Dundara, Djani and Radolović, Vito and Stipčević, Marko and Fischer, Niklas (2010) Implementation of lightweight sandwich panels for car deck structure. = Implementation of lightweight sandwich panels for car deck structure. In: 4. ECTPS - European Conference on Production Technologies in Shipbuilding: Outfitting in Ship Production, 29-30.04.2010., Papenburg; Germany.

Đukić, Ankica and Grubač, Zoran and Metikoš Huković, Mirjana and Firak, Mihajlo (2010) Water electrolysis on the 3D nickel foam catalyst using solar energy. = Water electrolysis on the 3D nickel foam catalyst using solar energy. In: Second Regional Symposium on Electrochemistry South-East Europe, 06-10.06.2010., Beograd; Serbia.

Đukić, Goran and Opetuk, Tihomir and Česnik, Vedran (2010) Greener Warehouses Through Increased Efficiency. = Greener Warehouses Through Increased Efficiency. In: International Conference on Industrial Logistics: Logistics and Sustainability, ICIL 2010; IME - Military Institute of Engineering, 08.-11.03.2010., Rio de Janeiro; Brazil.

Ezzeldin, Mahdy Abdelmonem M. and Van Den Bosch, P.P.J. and Jokić, Andrej and Waarsing, René (2010) Model-free optimization based feedforward control for an inkjet printhead. = Model-free optimization based feedforward control for an inkjet printhead. In: 2010 IEEE International Conference on Control Applications, CCA 2010, 08-10.09.2010., Yokohama, Japan.

Ezzeldin, Mahdy Abdelmonem M. and Jokić, Andrej and Van Den Bosch, P.P.J. (2010) A parameter varying Lyapunov function approach for tracking control for Takagi-Sugeno class of nonlinear systems. = A parameter varying Lyapunov function approach for tracking control for Takagi-Sugeno class of nonlinear systems. In: 2010 8th IEEE International Conference on Control and Automation, ICCA 2010, 09-11.06.2010., Xiamen, China.

Filetin, Tomislav and Šolić, Sanja and Jakovljević, Suzana (2010) Microhardness of the nacreous and prismatic seashell’s structures. = Microhardness of the nacreous and prismatic seashell’s structures. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Filetin, Tomislav and Žmak, Irena and Šolić, Sanja and Jakovljević, Suzana (2010) Microhardness of Mollusc Seashell Structures. = Microhardness of Mollusc Seashell Structures. In: International Conference on Innovative Technologies IN-TECH, 14-16.09.2010., Prag; Czech Republic.

Galović, Antun and Virag, Zdravko and Živić, Marija and Holik, Mario (2010) Eksergijska efikasnost procesa potpunog izgaranja zasićenih ugljikovodika. = Exergetic efficiency of the complete combustion process of some of the hydrocarbons. In: 8. skup o prirodnom plinu, toplini i vodi, 1. međunarodni skup o prirodnom plinu, toplini i vodi, 29.09.-01.10.2010., Osijek; Croatia.

Garašić, Ivica and Kralj, Slobodan and Kožuh, Zoran and Barun, Trpimir (2010) Podvodno mokro zavarivanje duplex čelika. = Underwater wet welding of duplex steel. In: III Savjetovanje o morskoj tehnologiji, 30.11.-01.12.2009., Rijeka; Croatia.

Gecevska, Valentina and Lombardi, Franco and Čuš, Franc and Angelides, Demos and Anišić, Zoran and Veža, Ivica and Ćosić, Predrag and Popovska Vasilevska, Sanja (2010) PLM Concept – Innovative View in Engineering Education. = PLM Concept – Innovative View in Engineering Education. In: XVI Skup Trendovi razvoja: Bolonja 2010: stanje, dileme i perspektive, 01-04.03.2010., Kopaonik; Serbia.

Grilec, Krešimir and Hrabrić, Ivan and Marić, Gojko (2010) Apsorpcija energije ojačanih aluminijskih pjena. = Energy Absorption of Reinforced Aluminium Foams. In: 1st International Conference Mechanical Technologies and Structural Materials, 21-22.10.2010., Split; Croatia.

Godec, Damir and Pilipović, Ana and Šercer, Mladen (2010) Application of Rapid Prototyping in Polymer Product Development - Case Studies. = Application of Rapid Prototyping in Polymer Product Development - Case Studies. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Velika Gorica; Slovenia.

Grilec, Krešimir and Krapinec, Zvonimir (2010) Tlačno ispitivanje aluminijskih pjena različitim brzinama tlačenja. = Compression testing of aluminium foams with different displacement rate. In: Međunarodno savjetovanje o materijalima, tribologiji, recikliranju, 23-25.06.2010., Vela Luka; Croatia.

Grozdek, Marino and Ćurko, Tonko and Khodabandeh, Rahmatollah and Lundqvist, Per and Soldo, Vladimir (2010) Performance Comparison Of A Static Ice-Bank And Dynamic Ice Slurry Cool Thermal Energy Storage Systems. = Performance Comparison Of A Static Ice-Bank And Dynamic Ice Slurry Cool Thermal Energy Storage Systems. In: 9th IIR Gustav Lorentzen Conference on Natural Working Fluids (GL2010), 12.-14.04.2010, Sydney; Australia.

Guzović, Zvonimir and Matijašević, Branimir (2010) Impact of national legal frameworks on increasing the implementation of small-scale hydro electricity plants (SHP) in Europe – experiences of SMART project. = Impact of national legal frameworks on increasing the implementation of small-scale hydro electricity plants (SHP) in Europe – experiences of SMART project. In: The 9th International Symposium Power and Process Plants and the 4th International Forum on Renewable Energy Sources, 29.09.-01.10.2010., Zagreb; Croatia.

Guzović, Zvonimir and Majcen, Boris (2010) Mogućnosti proizvodnje električne energije u Republici Hrvatskoj iz srednjotemperaturnih geotermalnih izvora. = Possibilities of Electric Energy Generation in Croatia from Middle-Temperature Geothermal Sources. In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Guzović, Zvonimir and Sviderek, Stanislav and Mihalić, Tihomir (2010) Characteristics of non-stationary thermal stresses in the disc of the last turbine stage. = Characteristics of non-stationary thermal stresses in the disc of the last turbine stage. In: 14th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology - TMT 2010, 11-18.09.2010., Mediterranean Cruise, Mediterranean.

Hermans, R.M. and Jokić, Andrej and Van Den Bosch, P.P.J. and Frunt, J. and Kamphuis, l.G. and Warmer, C.J. (2010) Limitations in the design of ancillary service markets imposed by communication network delays. = Limitations in the design of ancillary service markets imposed by communication network delays. In: IEEE International Conference on the European Energy Market 2010 (EEM2010), 23-25.06.2010., Madrid, Spain.

Hermans, Ralph M. and Lazar, Mircea and Jokić, Andrej (2010) Almost decentralized Lyapunov-based nonlinear model predictive control. = Almost decentralized Lyapunov-based nonlinear model predictive control. In: 2010 American Control Conference, ACC 2010, 30.06.-02.07.2010., Baltimore, USA.

Hermans, Ralph M. and Lazar, Mircea and Jokić, Andrej and Van Den Bosch, P.P.J. (2010) Almost decentralized model predictive control of power networks. = Almost decentralized model predictive control of power networks. In: 15th IEEE Mediterranean Electrotechnical Conference, MELECON 2010, 25-28.04.2010., Valletta, Malta.

Jakopčić, Mirko and Grilec, Krešimir (2010) Influence on artillery weapon barrel superheat on abrasion wear resistance of material. = Influence on artillery weapon barrel superheat on abrasion wear resistance of material. In: Međunarodno savjetovanje o materijalima, tribologiji, recikliranju, 23-25.06.2010., Vela Luka; Croatia.

Janković, Vesna (2010) Reality Hacking : ICT and Sustainable Development. = Reality Hacking : ICT and Sustainable Development. In: 2nd International Scientific Conference Management of Technology - Step to Sustainable Production, 02-04.06.2010., Rovinj; Croatia.

Kovačec, Miroslav and Pilipović, Ana (2010) Risk management in introducing the system for controlling glass container pressing procedures. = Risk management in introducing the system for controlling glass container pressing procedures. In: 2nd World Multiconference on Applied Econimics, Business & Development (AEBD '10), 03-06.05.2010., Kantaoui, Sousse; Tunisia.

Krajinović, Mario and Marić, Gojko (2010) Izrada polimernog kompozita ojačanog prirodnim vlaknima. = Construction of natural fiber reinforced polymer composite. In: 1st International Conference MTSM 2010, 21-22.10.2010., Split; Croatia.

Krankenhagen, R. and Kervalishvili, G.N. and Maierhofer, Susa M. and Maldague, X. and Boras, Ivanka (2010) Application of the Source Distribution Image (SDI) procedure Estimation of the Spatial Distribution of High Impulsed Heat Flux of the plaster-concrete bond for porosity detection in honeycomb structures Stimulations Through Infrared Thermography. = Application of the Source Distribution Image (SDI) procedure Estimation of the Spatial Distribution of High Impulsed Heat Flux of the plaster-concrete bond for porosity detection in honeycomb structures Stimulations Through Infrared Thermography. In: QIRT'10 International Conference Quantitative InfraRed Thermography, 27.-30. 07. 2010., Quebec; Canada.

Kumić, Ivan and Grilec, Krešimir and Ćurković, Lidija (2010) Solid particle erosion of alumina ceramics at different impact angles. = Solid particle erosion of alumina ceramics at different impact angles. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Lalić, Marijo and Ćurković, Lidija (2010) Utjecaj sadržaja Darvana na reološke karakteristike 70%-tne Al2O3 suspenzije. = Influence of Darvan amount on rheological properties of 70% alumina suspension. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Landek, Darko and Cajner, Franjo and Kovačić, Saša and Peharec, Ivan (2010) Utjecaj naknadne oksidacije na otpornost trošenju i korozijsku postojanost nitrokarburiranog čelika. = The effect of post oxidizing of nitrocarburized steel on its wear and corrosion resistance. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Lazar, Mircea and Jokić, Andrej (2010) On infinity norms as Lyapunov functions for piecewise affine systems. = On infinity norms as Lyapunov functions for piecewise affine systems. In: 13th ACM International Conference on Hybrid Systems: Computation and Control, HSCC'10, 12-15.04.2010., Stockholm, Sweden.

Leder Horina, Jasna and Jurčević Lulić, Tanja and Sušić, Aleksandar (2010) Ergonomic aspect of violin playing. = Ergonomic aspect of violin playing. In: 4th International Ergonomics Conference, 30.06.-03.07.2010., Stubičke Toplice; Croatia.

Lisjak, Dragutin and Čala, Ivo and Jambrak, Tomislav (2010) An example of using som neural network in identifying vibrations. = An example of using som neural network in identifying vibrations. In: Annals of DAAAM for 2010 and 21st International DAAAM Symposium Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions, 20.-23.09.2010., Zadar; Croatia.

Ljubas, Davor and Ćurković, Lidija and Juretić, Hrvoje and Dobrović, Slaven and Šimara, Matija (2010) Photocatalytic behavior of sol-gel TiO2 films. = Photocatalytic behavior of sol-gel TiO2 films. In: International conference on materials, tribology, recycling, MATRIB 2110, 23-25.06.2010., Vela Luka; Croatia.

Marić, Gojko and Jančić, Marko (2010) Ponašanje pri savijanju toplinski obrađenih aluminijskih pjena. = Influence of heat treatment on bending resistance of aluminium foam. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Marković, Dušan and Schneider, Daniel Rolph and Stefanović, Gordana (2010) Life cycle assessment of solid waste management: Case study of Zagreb, Croatia. = Life cycle assessment of solid waste management: Case study of Zagreb, Croatia. In: 2nd Conference of Sustainable Development and Climate Changes / 2. konferencija Održivi razvoj i klimatske promene, 13-15.09.2010., Niš; Serbia.

Math, Miljenko and Keran, Zdenka and Škunca, Marko (2010) Coining process from microforming point of view. = Coining process from microforming point of view. In: International Conference on Innovative Technologies IN-TECH, 14-16.09.2010., Prag; Czech Republic.

Mihaljević, Morana and Markučič, Damir and Stepanić, Josip (2010) Statistical analysis of ultrasonic reflector response. = Statistical analysis of ultrasonic reflector response. In: The 21ST DAAAM World Symposium, "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23.10.2010., Zadar; Croatia.

Mudrinić, Saša and Halasz, Boris and Galović, Antun (2010) An Experimental Study of Fluidized Bed of Pearl Barley. = An Experimental Study of Fluidized Bed of Pearl Barley. In: IDS 2010 17th International Drying Symposium, 03-06.10.2010., Magdeburg; Germany.

Müller, Andreas and Terze, Zdravko and Koroman, Vladimir (2010) Constraint Stabilization and Regularization for Multibody Systems. = Constraint Stabilization and Regularization for Multibody Systems. In: 1st European Space Agency Workshop on Multibody Dynamics for Space Applications, 02-03.02.2010., Noordwijk; Netherlands.

Mulc, Tihomir and Udiljak, Toma and Ciglar, Damir and Brezak, Danko and Staroveški, Tomislav (2010) Application of non-parametric methods for monitoring of tool chipping. = Application of non-parametric methods for monitoring of tool chipping. In: 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23.10.2010., Zadar, Croatia.

Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2010) Application of Schrödinger equation to an alpha field in nanorobotics. = Application of Schrödinger equation to an alpha field in nanorobotics. In: IV European Conference on Computational Mechanics, 16-21.05.2010., Paris, France.

Opetuk, Tihomir and Žolo, Ivan and Đukić, Goran (2010) Greening Elements in the Distribution Network. = Greening Elements in the Distribution Network. In: MOTSP 2010, 02.-04. 06. 2010., Rovinj; Croatia.

Parunov, Joško and Ćorak, Maro (2010) Influence of environmental and operational uncertainties on vertical wave bending moments of containerships. = Influence of environmental and operational uncertainties on vertical wave bending moments of containerships. In: William Froude Conference: Advances in Theoretical and Applied Hydrodynamics - Past and Future, 24-25.11.2010., Portsmouth; United Kingdom.

Parunov, Joško and Ćorak, Maro (2010) Influence of environmental and operational uncertainties on design wave loads of containerships. = Influence of environmental and operational uncertainties on design wave loads of containerships. In: Internatonal Workshop on springing and whipping of ships, 10-11.11.2010., Dubrovnik; Croatia.

Perić, Mato and Tonković, Zdenko and Karšaj, Igor (2010) Numerical analysis of Residual Stresses in Welding Process Using Shell to Solid Coupling Technique. = Numerical analysis of Residual Stresses in Welding Process Using Shell to Solid Coupling Technique. In: International Conference on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST-2010), 15.-16.07.2010., Istanbul; Turkey.

Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Nova Gorica; Slovenia.

Pustaić, Dragan and Cajner, Franjo (2010) Influence of Microstructure of 65 Si 7 Steel on its Mechanical Properties. = Influence of Microstructure of 65 Si 7 Steel on its Mechanical Properties. In: 6th International Conference on Materials Structure & Micromechanics of Fracture, 28-30.06.2010., Brno; Czech Republic.

Radolović, Vito and Dundara, Djani and Romanoff, Jani and Stipčević, Marko and Žanić, Vedran and Andrić, Jerolim and Prebeg, Pero and Hadžić, Neven and Noury, Philippe and Czaplinski, Michal and Fischer, Niklas and Lehne, Markus (2010) Deck Structures For Ro-Ro Vessels And Car Carriers : Final Report R4B. = Deck Structures For Ro-Ro Vessels And Car Carriers : Final Report R4B. In: DE-LIGHT Transport final meeting, 21.-22.01.2010., Vlissingen; Netherlands.

Rudan, Smiljko and Tabri, Kristjan and Klarić, Ivan (2010) Analysis of sloshing interaction in ship collisions by means of ALE finite element method. = Analysis of sloshing interaction in ship collisions by means of ALE finite element method. In: International Conference on Collision and grounding of Ships, 14-16.06.2010., Espoo; Finland.

Rujnić-Sokele, Maja and Šercer, Mladen and Godec, Damir (2010) Process capability analysis in the manufacturing of PET bottles. = Process capability analysis in the manufacturing of PET bottles. In: The 13th Esaform Conference on Material Forming, 07-09.04.2010., Brescia; Italy.

Runje, Biserka and Baršić, Gorana and Alar, Vesna (2010) Role of gage R&R in estimation of process capability. = Role of gage R&R in estimation of process capability. In: 14th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology - TMT 2010, 11-18.09.2010., Mediterranean Cruise, Mediterranean.

Runje, Biserka and Baršić, Gorana and Kralj, Hrvoje (2010) Utjecaj kvalitete mjernog sustava na sposobnost procesa. = Impact of measurement systems quality on process capability analysis. In: 10. Hrvatska konferencija o kvaliteti i 1. znanstveni skup HDK o kvaliteti, 10-12.05.2010., Šibenik, Croatia.

Schneider, Daniel Rolph and Bogdan, Željko (2010) Energy Recovery from Municipal Waste – Contribution to Sustainable Development of Croatia. = Energy Recovery from Municipal Waste – Contribution to Sustainable Development of Croatia. In: 2nd Conference of Sustainable Development and Climate Changes / 2. konferencija Održivi razvoj i klimatske promene, 13-15.09.2010., Niš; Serbia.

Schneider, Daniel Rolph and Kirac, Mislav and Hublin, Andrea and Bogdan, Željko (2010) Greenhouse Gas Emission Reduction and Energy Potential in Waste Management in Croatia. = Greenhouse Gas Emission Reduction and Energy Potential in Waste Management in Croatia. In: Third International Symposium on Energy from Biomass and Waste, 08-11.11.2010., Venice; Italy.

Smojver, Ivica and Ivančević, Darko (2010) Coupled Euler Lagrangian Approach Using Abaqus /Explicit in the Bird Strike Aircraft Damage Analysis. = Coupled Euler Lagrangian Approach Using Abaqus /Explicit in the Bird Strike Aircraft Damage Analysis. In: 2010 Simulia Customers Conference, 25-27.05.2010., Providence; USA.

Soldo, Vladimir and Ruševljan, Miroslav and Ćurko, Tonko and Grozdek, Marino (2010) Ground-source heat pump with a 100 m deep borehole heat exchanger – start up and first results. = Ground-source heat pump with a 100 m deep borehole heat exchanger – start up and first results. In: Sustainable Refrigeration and Heat Pump Technology, 13-16.06.2010., Stockholm; Sweden.

Soldo, Vladimir and Ruševljan, Miroslav and Grozdek, Marino and Ćurko, Tonko (2010) Ground sorce heat pump in cooling mode. = Ground sorce heat pump in cooling mode. In: Energy and the Enviroment 2010, 18-22.10.2010., Opatija; Croatia.

Staniša, Branko and Ćurković, Lidija and Schauperl, Zdravko (2010) Analiza istaloženih soli u protočnom dijelu parne turbine 210 MW. = Analysis of Deposited Salts in the Through-Flow Area of a 210 MW Steam Turbine. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Stepanić, Josip and Gavranović, Barbara (2010) Analysing team games as sociophysical systems. = Analysing team games as sociophysical systems. In: Informacijska družba − IS 2010, 11-15.10.2010., Ljubljana; Slovenia.

Sušić, Aleksandar and Štorga, Mario and Majić, Marijana (2010) Rapid ergonomic assessment methodology for engineering design. = Rapid ergonomic assessment methodology for engineering design. In: 4th International Ergonomics Conference, 30.06.-03.07.2010., Stubičke Toplice; Croatia.

Sutlović, Igor and Degiuli, Nastia and Filipan, Veljko (2010) Energy Intensity Lowering in Polyethylene Production. = Energy Intensity Lowering in Polyethylene Production. In: 14th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology - TMT 2010, 11-18.09.2010., Mediterranean Cruise, Mediterranean.

Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2010) Injection moulding and recycling of wood-thermoplastic composites. = Injection moulding and recycling of wood-thermoplastic composites. In: 7th Int. Conference on Mechanical Engineering GEPESZET 2010, 25-26.05.2010., Budapest; Hungary.

Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2010) Thermal properties of bio- and synthetic based PUR foams. = Thermal properties of bio- and synthetic based PUR foams. In: 13th ESAFORM Conference on Material Forming, 07-09.04.2010., Brescia; Italy.

Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2010) Thermal Properties of Common and Bio-Based Polyurethane. = Thermal Properties of Common and Bio-Based Polyurethane. In: International Conference on Innovative Technologies IN-TECH, 14-16.09.2010., Prag; Czech Republic.

Šercer, Mladen and Tonković, Zlatko and Raos, Pero and Stojšić, Josip (2010) Ispitivanje trajnosti membrana regulatora plina. = Testing the Durability of Gas Regulator Membrane. In: 1st International natural gas, heat and water conference, 29.09.-01.10.2010., Osijek; Croatia.

Šestan, Ante and Gomerčić, Mladen and Ljubenkov, Boris and Vladimir, Nikola (2010) Measurement of hull deflections for reliable propulsion system alignment using digital photogrammetry. = Measurement of hull deflections for reliable propulsion system alignment using digital photogrammetry. In: International Conference on Innovative Technologies IN-TECH, 14-16.09.2010., Prag; Czech Republic.

Šitum, Željko and Milić, Vladimir and Essert, Mario (2010) Throttling and volumetric control principle to an electrohydraulic velocity servomechanism. = Throttling and volumetric control principle to an electrohydraulic velocity servomechanism. In: 7th International Fluid Power Conference, 22-24.03.2010., Aachen, Germany.

Škunca, Marko and Keran, Zdenka and Math, Miljenko (2010) Recording of a true stress-strain curve by the use of the modified hydraulic bulging. = Recording of a true stress-strain curve by the use of the modified hydraulic bulging. In: International Conference on Innovative Technologies IN-TECH, 14-16.09.2010., Prag; Czech Republic.

Škunca, Marko and Math, Miljenko and Grizelj, Branko (2010) Modified hydraulic bulging in acquisition of stress - strain curve. = Modified hydraulic bulging in acquisition of stress - strain curve. In: 13th ESAFORM Conference on Material Forming, 07-09.04.2010., Brescia; Italy.

Šolić, Sanja and Cajner, Franjo and Leskovšek, Vojteh and Rafael, Hrvoje (2010) Utjecaj parametara toplinske obrade na svojstva brzoreznog čelika PM S390 MC. = Influence of heat treatment parameters on PM S390 MC high speed steel properties. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Štefanić, Nedeljko and Tošanović, Nataša and Hegedić, Miro (2010) Current state analysis of production process by value stream mapping. = Current state analysis of production process by value stream mapping. In: MOTSP 2010, 02.-04.06.2010., Rovinj; Croatia.

Štorga, Mario and Marjanović, Dorian and Pavković, Neven and Bojčetić, Nenad and Stanković, Tino (2010) Improving design communication with traceable engineering design information. = Improving design communication with traceable engineering design information. In: Fourth International Conference on Design Computing and Cognition, 08-13.07.2010., Stuttgart; Germany.

Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2010) Heuristic action planning algorithm for distributed multiagent systems. = Heuristic action planning algorithm for distributed multiagent systems. In: 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23.10.2010., Zadar, Croatia.

Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2010) A multiagent approach for development of a flexible and adaptive robotic assembly work cell. = A multiagent approach for development of a flexible and adaptive robotic assembly work cell. In: Annual International Conference on Computational Intelligence and Industrial Application, 04-05.12.2010., Wuhan, China.

Trbušić, Helena (2010) Business Ethics and Managing Reputation. = Business Ethics and Managing Reputation. In: MOTSP2010, 2nd International Scientific Conference Management of Technology – Step to Sustainable Production, 02.-04.06.2010., Rovinj; Croatia.

Vrca, Anna and Dubreta, Nikša (2010) Flexicurity in Croatia: Transitional Socio-economic Puzzle. = Flexicurity in Croatia: Transitional Socio-economic Puzzle. In: 14th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology - TMT 2010, 11-18.09.2010., Mediterranean Cruise, Mediterranean.

Vuković, Danijel and Slamić, Miroslav and Janković, Slobodan and Vrdoljak, Milan (2010) About the influence of the atmosphere over the wildfire on the flight dynamics for the helicopter simulator application. = About the influence of the atmosphere over the wildfire on the flight dynamics for the helicopter simulator application. In: 36th European Rotorcraft Forum, 07-09.09.2010., Paris; France.

Abrashi, Arijan and Štefanić, Nedeljko and Kovačec, Miroslav (2010) The Advantages of Using Diploid Chromosomes in Solving Permutation Class of problems. = The Advantages of Using Diploid Chromosomes in Solving Permutation Class of problems. In: MOTSP2010, 2nd International Scientific Conference Management of Technology – Step to Sustainable Production, 02.-04.06.2010., Rovinj; Croatia.

Barić, Gordana (2010) Plastika i guma - danas i sutra. = Plastics and rubber - today and tomorrow. In: Plastika i guma - danas i sutra, 23.09.2010., Zagreb; Croatia.

Cajner, Hrvoje and Babić, Anita and Šakić, Nikola (2010) Pokusi sa smjesama - primjena pri optimiranju svojstava materijala. = In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Čanžar, Predrag and Tonković, Zdenko and Kodvanj, Janoš and Bakić, Ante and Drvar, Nenad and Tomičević, Zvonimir and Surjak, Martin (2010) Eksperimentalno i numeričko modeliranje zamornog ponašanja materijala. = Experimental and numerical modelling of material fatigue behaviour. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Čatić, Igor (2010) Četrdeseta obljetnica osnivanja Društva za plastiku i gumu. = Fortieth anniversary of founding of Society of plastics engineers of Croatia. In: Plastika i guma - danas i sutra, 23.09.2010., Zagreb; Croatia.

Čupić, Bernard and Dundara, Djani and Andrić, Jerolim and Prebeg, Pero and Žanić, Vedran (2010) Ships hull structure FEM analysis and optimization in early design stage. = Ships hull structure FEM analysis and optimization in early design stage. In: XIX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 19th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 07-09.10.2010., Split, Lumbarda; Croatia.

Ćorić, Danko and Franz, Mladen and Schauperl, Zdravko (2010) Istraživanje uzroka loma kuglaste slavine. = Investigation of Ball Valve Fracture. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Eržišnik, Jadranka and Kožuh, Zoran and Kralj, Slobodan (2010) Safety risks and necessary protective measures in underwater welding. = Safety risks and necessary protective measures in underwater welding. In: Dani varilne tehnike 2010- Zaščita in varnost pri varjenju, 18-21.05.2010., Celje; Slovenia.

Hoster, Josip and Jarak, Tomislav and Sorić, Jurica (2010) Bezmrežna mješovita kolokacijska formulacija za rješavanje dvodimenzijskih linearno-elastičnih problema. = Meshless mixed collocation formulation for solving 2-D linear-elastic problems. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Cajner, Hrvoje and Babić, Anita and Šakić, Nikola (2010) Značaj uporabe planiranja pokusa pri optimiranju procesa i proizvoda. = Importance of using design of experiments in process and product optimization. In: 10. hrvatska konferencija o kvaliteti i 1. znanstveni skup hrvatskog društva za kvalitetu, 10-12.05.2010., Šibenik; Croatia.

Jarak, Tomislav and Sorić, Jurica (2010) Numerička analiza ljuskastih konstrukcija pomoću bezmrežne MLPG metode. = Numerical analysis of the shell-like structures by means of the MLPG method. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Jurina, Martin and Jantol, Danijel and Kodba, Davor and Soldo, Vladimir (2010) Energetska usporedba vodenog indirektnog i freonskog direktnog sustava hlađenja zgrade. = Energy comparison of water indirect cooling system and direct cooling system in building. In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Karšaj, Igor and Sorić, Jurica and Humphrey, Jay D. (2010) Trodimenzijski model rasta i promjene strukture krvne žile. = Threedimensional model of arterial growth and remodeling. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Kekez, Krešimir and Pažameta, Dražen and Stojanović, Ivan (2010) Katodna zaštita brodova – instalacija stanice za praćenje rada katodne zaštite. = Cathodic protection of boats – instalation of cathodic protection monitoring unit. In: Prvi međunarodni simpozij o koroziji i zaštiti materijala i životnoj sredini, 23-26.11.2010., Bar; Montenegro.

Krajačić, Goran and Duić, Neven and Zmijarević, Zlatko (2010) Povećanje prihvata vjetroelektrana u elektroenergetski sustav primjenom rješenja za skladištenje energije. = In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Krajna, Tamara and Martek, Alisa (2010) Implementacija standarda i protokola u integrirane knjižnične sustave. = Implementation of standards and protocols into integrated library systems. In: 11. dani specijalnih i visokoškolskih knjižnica, 01-04.04.2009., Opatija; Croatia.

Lisjak, Dragutin and Čala, Ivo and Štefanić, Nedeljko (2010) Procjena uzroka vibracija neuronskom mrežom. = The estimation of vibration causes using neural networks. In: 16. Međunarodno savjetovanje Hrvatskog društva održavatelja, 25.-27.05.2010., Šibenik; Croatia.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Skozrit, Ivica (2010) Numeričko modeliranje akumuliranja oštećenja u koštanom tkivu. = Numerical Modeling of Damage Accumulation in Bone Tissue. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Ljubas, Davor and Benčić, Tomislav and Marčić, Boris (2010) Mogućnosti transporta i skladištenja prirodnog plina u obliku plinskih hidrata. = Transportation and storage possibilities of natural gas in the form of gas hydrates. In: Međunarodni znanstveno-stručni susret stručnjaka za plin, 05-07.05.2010., Opatija; Croatia.

Martinković, Željko and Stojanović, Ivan and Mihalic, Ivana (2010) Zaštita čeličnih konstrukcija ekološkim premazima i primjeri iz prakse. = Protection of steel structures by eco-friendly coatings and practice examples. In: 19. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2010", 15.04.2010., Zagreb; Croatia.

Rujnić-Sokele, Maja (2010) Prednosti i nedostatci sintetske bioplastike. = Advantages and disadvantages of synthetic bioplastics. In: Plastika i guma - danas i sutra, 23.09.2010., Zagreb; Croatia.

Skozrit, Ivica and Tonković, Zdenko (2010) Numeričko modeliranje pukotina u polimernim materijalima. = Numerical Modelling of Cracks in Polymeric Materials. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Smojver, Ivica and Ivančević, Darko (2010) Numerička simulacija oštećenja zakrilca putničkog aviona opterećenog udarom ptice. = Numerical Simulation of Damage in Airliner Slat at Bird Impact. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Soldo, Vladimir and Ruševljan, Miroslav and Ćurko, Tonko and Grozdek, Marino (2010) Rezultati mjerenja na ispitnoj dizalici topline s bušotinskim izmjenjivačem topline. = The experimental results of the heat pump with the borehole heat exchanger. In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Švaić, Srećko and Boras, Ivanka and Dović, Damir (2010) Implementation of thermography for determination of air jet geometry in HVAC systems. = Implementation of thermography for determination of air jet geometry in HVAC systems. In: 10th International Conference on Quantitative InfraRed Thermography - QIRT, 27.-30.07.2010., Qubeck; Canada.

Virag, Lana and Šavar, Mario (2010) Metoda određivanja volumena tlačne posude za ublažavanje hidrauličkog udara. = In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Vladimir, Nikola and Ćatipović, Ivan and Čorić, Većeslav and Senjanović, Ivo (2010) Zaštitna konstrukcija za komunikacijski most između dvaju pomorskih objekata. = Safety structure for communication bridge between two floating objects. In: III Savjetovanje o morskoj tehnologiji in memoriam akademiku Zlatku Winkleru, 30.11.-01.12.2009., Rijeka; Croatia.

Zastavnik, Filip and Vrdoljak, Milan (2010) Simulacija leta helikoptera u stvarnom vremenu modelom prve razine. = Helicopter Flight Real-Time Simulation with level one model. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Ćurković, Lidija and Ašperger, Danijela and Mutavdžić Pavlović, Dragana and Šnajdar, Mateja and Živković, Jadranka (2010) Characterization of folk instrument strings. = Characterization of folk instrument strings. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Dobrović, Slaven and Blatarić, Zoran (2010) Značaj određivanja SDI indeksa za ocjenu kvalitete vode. = The significance of SDI index determination for the evaluation of water quality. In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Dobrović, Slaven and Juretić, Hrvoje and Ljubas, Davor (2010) Ekonomski i ekološki aspekti recikliranja otpadne vode u industriji. = Economic and environmental aspects of industrial wastewater recycling. In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Filetin, Tomislav and Marić, Gojko and Alar, Željko (2010) Mechanical properties of aluminium foam after heat treatment and reinforcing. = Mechanical properties of aluminium foam after heat treatment and reinforcing. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Grilec, Krešimir and Kumić, Ivan and Ćurković, Lidija and Baršić, Gorana (2010) The erosion of AIN ceramics by sand particles. = The erosion of AIN ceramics by sand particles. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Perić, Nedjeljko and Jelavić, Mate and Ban, Željko and Domitrović, Hrvoje and Matijašević, Branimir and Kostelac, Milan and Mikac, Stjepan (2010) Laboratorij za obnovljive izvore energije na Fakultetu elektrotehnike i računarstva Sveučilišta u Zagrebu. = Laboratory for the Renewable Energy Sources at Faculty of Electrical Engineering and Computing, University of Zagreb. In: Drugo savjetovanje međunarodne elektrodistribucijske konferencije CIRED, 16-19.05.2010., Umag; Croatia.

Tonković, Zdenko and Sorić, Jurica and Marenić, Eduard (2010) Numerička analiza tankostjene čelične boce za ukapljeni naftni plin. = Numerical analysis of thinwalled steel pressure vessel for liquified petroleum gas. In: 7. Hrvatski Seminar o Tlačnoj Opremi, 20.05.2010., Zagreb; Croatia.

Virag, Zdravko and Lulić, Fabijan and Džijan, Ivo (2010) Pregled hemodinamičkih modela arterijskog stabla. = In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko and Milić, Vladimir (2014) Application of control terms P1 and P2 to estimation of rotation curve of stars. = Application of control terms P1 and P2 to estimation of rotation curve of stars. In: 18th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", 10-12.09.2014., Budimpešta, Mađarska.

Baček, Tomislav and Majetić, Dubravko and Brezak, Danko (2013) Parallel levenberg-marquardt-based neural network with variable decay rate. = Parallel levenberg-marquardt-based neural network with variable decay rate. In: 14th International Scientific Conference on Production Engineering, 19-22.06.2013, Biograd, Hrvatska.

Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2013) Control of nanorobot motion in a quantum alpha field. = Control of nanorobot motion in a quantum alpha field. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.

Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2012) Coordinate transformation in nanorobotics. = Coordinate transformation in nanorobotics. In: Trends in the Development of Machinery and Associated Technology, 10-12.09.2012., Dubai, Ujedinjeni Arapski Emirati.

Baček, Tomislav and Majetić, Dubravko and Brezak, Danko and Kasać, Josip (2011) Analysis of iterative learning algorithms for the multilayer perceptron neural network. = Analysis of iterative learning algorithms for the multilayer perceptron neural network. In: The 22nd DAAAM International Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.

Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2011) Some problems and solutions in nanorobot control. = Some problems and solutions in nanorobot control. In: The 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.

Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2011) Control of nanorobot motion in a multipotential field. = Control of nanorobot motion in a multipotential field. In: 13th International Scientific Conference on Production Engineering, 16-18.06.2011., Biograd, Hrvatska.

Staroveški, Tomislav and Brezak, Danko and Udiljak, Toma and Majetić, Dubravko and Goja, Željko and Ciglar, Damir (2011) Three-axis milling machine with the enhanced machine controller. = Three-axis milling machine with the enhanced machine controller. In: CIM 2011- Computer Integrated Manufacturing and High Speed Machining, 16-18.06.2011., Biograd, Hrvatska.

Staroveški, Tomislav and Brezak, Danko and Udiljak, Toma and Majetić, Dubravko (2011) Experimental machine tool for process monitoring and control systems research. = Experimental machine tool for process monitoring and control systems research. In: The 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.

Hoić, Matija and Kranjčević, Nenad and Deur, Joško (2014) Experimental characterization of dry dual clutch elastic components with application to clutch modelling. = Experimental characterization of dry dual clutch elastic components with application to clutch modelling. In: Powertrain Modelling and Control Conference, PMC 2014, 10-12.09.2014., Bradford, Ujedinjeno Kraljevstvo.

Vranković, Nikola and Kranjčević, Nenad and Stegić, Milenko (2014) New Method for Solving Vibration Systems with Clearances. = New Method for Solving Vibration Systems with Clearances. In: 17th U.S. National Congress on Theoretical and Applied Mechanics, 15-20.06.2014., East Lansing MI, SAD.

Kranjčević, Nenad and Stegić, Milenko and Vranković, Nikola (2013) A novel algorithm for solving MDOF systems with clearances. = A novel algorithm for solving MDOF systems with clearances. In: The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13), 8-12.09.2013., Jeju, Južna Koreja.

Berković-Šubić, Mihaela and Boras, Ivanka and Frančeski, Joško and Kodvanj, Janoš and Rodić, Alan and Švaić, Srećko and Tonković, Zdenko (2015) Application of IR Thermography for Determination of Material Properties. = Application of IR Thermography for Determination of Material Properties. In: QIRT-Asia 2015 Conference on Quantitative InfraRed Thermography, 6.-10.07.2015., Mahabalipuram, Indija.

Tonković, Zdenko and Perić, Mato and Surjak, Martin and Garašić, Ivica and Boras, Ivanka and Rodić, Alan and Švaić, Srećko (2012) Numerical and Experimental Modeling of a T-joint Fillet Welding Process. = Numerical and Experimental Modeling of a T-joint Fillet Welding Process. In: Quantitative Infrared Thermography conference (11 ; 2012), 11.– 14.06.2012, Napulj, Italija.

Zore, Zvonimir and Stanec, Mladen and Filipović Zore, Irina and Metejčić, A. and Boras, Ivanka and Rodić, Alan and Švaić, Srećko (2012) Thermography in Breast Cancer Diagnosis. = Thermography in Breast Cancer Diagnosis. In: Quantitative Infrared Thermography conference (11 ; 2012), 11.– 14.06.2012, Napulj, Italija.

Jug, Matija and Boras, Ivanka and Beljo Lučić, Ružica and Čavlović, Anka Ozana and Šafran, Branimir (2011) Mogućnosti primjene infracrvene termografije u istraživanjima procesa mehaničke obrade drva. = Possibilities of infrared thermography implementation in the research of the mechanical wood processing. In: Ambienta, 21.10.2011., Zagreb, Hrvatska.

Sočev, Ana and Boras, Ivanka (2011) Analiza kvalitete izolacije i kontrola ovojnice zgrade primjenom infracrvene termografije. = Analysis of the quality of insulation and envelope control using infrared thermography. In: 21. međunarodni simpozij o grijanju, hlađenju i klimatizaciji 10. konferencija o termografiji, 7.-8. 04. 2011., Zagreb, Hrvatska.

Barkaoui, Alae-Eddine and Boldyryev, Stanislav and Duić, Neven and Krajačić, Goran and Guzović, Zvonimir (2015) Appropriate Integration of Geothermal Energy Sources by Pinch Approach: Case Study of Croatia. = Appropriate Integration of Geothermal Energy Sources by Pinch Approach: Case Study of Croatia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.-02.10.2015, Dubrovnik, Croatia.

Wang, Jin and Vujanović, Milan and Baleta, Jakov and Duić, Neven and Guzović, Zvonimir (2015) Effects of surface deposition and droplet injection on film cooling. = Effects of surface deposition and droplet injection on film cooling. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Guzović, Zvonimir and Blatarić, Zoran and Rašković, Predrag (2013) The Comparision of a Basic and a Dual‐Pressure Organic Rankine Cycles (ORC): Geothermal Power Plant Velika Ciglena Case Study. = The Comparision of a Basic and a Dual‐Pressure Organic Rankine Cycles (ORC): Geothermal Power Plant Velika Ciglena Case Study. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.

Guzović, Zvonimir and Klun, Mario and Rašković, Predrag (2013) Waste Heat Recovery of Internal Combustion Engine by Organic Rankine Cycle. = Waste Heat Recovery of Internal Combustion Engine by Organic Rankine Cycle. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.

Guzović, Zvonimir and Bačelić-Medić, Zlatko and Rašković, Predrag (2012) Effect of Working Fluids on Organic Rankine Cycle for Geothermal Power Plant „Lunjkovec-Kutnjak“. = Effect of Working Fluids on Organic Rankine Cycle for Geothermal Power Plant „Lunjkovec-Kutnjak“. In: 7th Conference on Sustainable Development of Energy, Water and Environment Systems, 01-06.07.2012., Ohrid, Makedonija.

Guzović, Zvonimir and Kovačić, Krešimir and Mihalić, Tihomir (2012) Non-stationary temperature stresses in the industrial steam turbine rotor. = Non-stationary temperature stresses in the industrial steam turbine rotor. In: The 16th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” - TMT 2012, 10.-12.09.2012., Dubai, Ujedinjeni Arapski Emirati.

Guzović, Zvonimir and Rajčić, Ante and Mihalić, Tihomir (2012) Mogućnosti iskorištavanja energije vjetra u gradskim sredinama. = Possibilities of wind energy utilization in urban surroundings. In: 10th International Symposium Power and Process Plants and 5th International Forum on Renewable Energy Sources, 24.-26.10.2012., Rovinj, Hrvatska.

Guzović, Zvonimir and Rašković, Predrag and Christoforidou, T. Lily (2012) Current Status of Small Hydropower Plants (SHP) Application in Southeast European Countries. = Current Status of Small Hydropower Plants (SHP) Application in Southeast European Countries. In: 7th Conference on Sustainable Development of Energy, Water and Environment Systems, 01-06.07.2012., Ohrid, Makedonija.

Guzović, Zvonimir and Antoniazzi, Marco and Garofalo, Elizabetta and Alterach, Julio and Peviani, Maximo and Maradin, Marinko and Gunnar Dahlhaug, Ole and Christoforidou, Lilly and Schlager, Otmar (2011) Lessons Learned from Project SMART. = Lessons Learned from Project SMART. In: The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.

Guzović, Zvonimir and Jukić, Perica and Lončar, Dražen (2011) Determination of the Operating Regimes of CHP Turbines with Stage-wise Heating of District Heating System Water. = Determination of the Operating Regimes of CHP Turbines with Stage-wise Heating of District Heating System Water. In: World Renewable Energy Congress 2011 - Sweden, 08.-13.05.2011., Linkoping, Švedska.

Guzović, Zvonimir and Martan, Boško and Majcen, Boris (2011) Possibilities of electricity generation in the Republic of Croatia by means of low temperature geothermal sources. = Possibilities of electricity generation in the Republic of Croatia by means of low temperature geothermal sources. In: Interklima 2011 - 21st. International Symposium on Heating, Refrigerating and Air Conditioning and 10th. Conference on Thermography, 07-08.04.2011., Zagreb, Republika Hrvatska.

Guzović, Zvonimir and Matijašević, Branimir and Mihalić, Tihomir (2011) Characteristics of Non-Stationary Thermal Stresses In the Low-Pressure Part of the Rotor. = Characteristics of Non-Stationary Thermal Stresses In the Low-Pressure Part of the Rotor. In: 15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” - TMT 2011, 12.-18.09.2011., Prag, Češka.

Guzović, Zvonimir and Rašković, Predrag and Cvetković, Svetislav (2011) Exergy Analysis of Electricity Generation by the Medium Temperature Geothermal Resources: Geothermal Power Plant Velika Ciglena Case Study. = Exergy Analysis of Electricity Generation by the Medium Temperature Geothermal Resources: Geothermal Power Plant Velika Ciglena Case Study. In: The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25.-29.09.2011., Dubrovnik, Hrvatska.

Matijašević, Branimir and Guzović, Zvonimir (2011) Tehničko tehnološki aspekt korištenja energije vjetra u Republici Hrvatskoj. = Technical and technological aspect of the wind energy usage in The Republic of Croatia. In: 2. međunarodni kogres "Dani inženjera strojarstva", 23.-26.03.2011., Split, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2016) Second-Order Computational Homogenization Approach Using Higher-Order Gradients at Microlevel. = Second-Order Computational Homogenization Approach Using Higher-Order Gradients at Microlevel. In: 14th International Conference on Fracture and Damage Mechanics, FDM 2015, 23.-23.09.2015., Budva; Montenegro.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2015) Second-Order Computational Homogenization Scheme Preserving Microlevel C1 Continuity. = Second-Order Computational Homogenization Scheme Preserving Microlevel C1 Continuity. In: International Conference on Fracture and Damage Mechanics, 23.-25. 09. 2014., Azori, Portugal.

Milutinović, Milan and Kranjčević, Nenad and Deur, Joško (2013) Multi-mass dynamic model of a variable-length tether used in a high altitude wind energy system. = Multi-mass dynamic model of a variable-length tether used in a high altitude wind energy system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Švaić, Srećko and Boras, Ivanka and Hiti, Mirela Infrared thermography and numerical methods in civil engineering. = Infrared thermography and numerical methods in civil engineering. In: UNDP Međunarodna konferencija Energy management in cultural heritage, 6.-8. 04. 2011., Dubrovnik, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2015) C1 Microlevel Second-Order Computational Homogenization. = C1 Microlevel Second-Order Computational Homogenization. In: International Congress of Croatian Society of Mechanics (8 ; 2015), 29.09.-02.10.2015., Opatija, Hrvatska.

Putar, Filip and Lesičar, Tomislav and Sorić, Jurica and Tonković, Zdenko (2015) Damage modeling using higher-order finite element formulation. = Damage modeling using higher-order finite element formulation. In: 8th International Congress of Croatian Society of Mechanics, 29.09. - 02.10.2015., Opatija, Hrvatska.

Skozrit, Ivica and Frančeski, Joško and Tonković, Zdenko and Surjak, Martin and Krstulović-Opara, Lovre and Vesenjak, Matej and Kodvanj, Janoš and Gunjević, Bojan and Lončarić, Damir (2015) Validation of numerical model by means of digital image correlation and thermography. = Validation of numerical model by means of digital image correlation and thermography. In: 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, VAL2015, 23-26.03.2015., Prague, Czech Republic.

Skozrit, Ivica and Tonković, Zdenko and Krstulović- Opara, Lovre and Surjak, Martin and Vesenjak, Matej and Čanžar, Predrag and Sorić, Jurica (2015) Damage Initiation and Evolution in Nodular Cast Iron for Wind Turbine Components. = Damage Initiation and Evolution in Nodular Cast Iron for Wind Turbine Components. In: 8th International Congress of Croatian Society of Mechanics, 29.09.-02.10.2015., Opatija, Croatia.

Čanžar, Predrag and Tonković, Zdenko (2013) Ductile Cast Iron Microstructure and its Influence on Mechanical Properties. = Ductile Cast Iron Microstructure and its Influence on Mechanical Properties. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25-28.09.2013., Primošten, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2013) On Boundary Conditions in Multiscale Second-Order Computational Homogenization Scheme. = On Boundary Conditions in Multiscale Second-Order Computational Homogenization Scheme. In: South-East European Conference on Computational Mechanics (3 ; 2013), 12.-14.06.2013, Kos, Grčka.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Bakić, Ante (2013) A Constitutive Model for Bovine Cortical Bone under Cyclic Creep-Recovery Loading. = A Constitutive Model for Bovine Cortical Bone under Cyclic Creep-Recovery Loading. In: 12th International Conference on Fracture and Damage Mechanics, 17-19.09.2013., Alghero, Italija.

Čanžar, Predrag and Tonković, Zdenko and Drvar, Nenad and Bakić, Ante and Kodvanj, Janoš (2012) Low-cycle fatigue investigations and numerical simulations on nodular cast iron for wind turbine components. = Low-cycle fatigue investigations and numerical simulations on nodular cast iron for wind turbine components. In: 7th International Congress of Croatian Society of Mechanics, 22-25.05.2012., Zadar, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica and Čanžar, Predrag (2012) Multiscale modelling of deformation processes of nodular cast iron. = Multiscale modelling of deformation processes of nodular cast iron. In: 7th International Congress of Croatian Society of Mechanics, 22.-25.05.2012., Zadar, Hrvatska.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2012) Experimental and numerical investigation of cyclic creep and recovery behaviour of short-fiber-filled epoxy. = Experimental and numerical investigation of cyclic creep and recovery behaviour of short-fiber-filled epoxy. In: 7th International Congress of Croatian Society of Mechanics, 23-25. 05. 2012., Zadar, Hrvatska.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Bakić, Ante and Pustaić, Dragan (2012) Numerical and experimental modelling cortical bone tissue deformation processes. = Numerical and experimental modelling cortical bone tissue deformation processes. In: First International Conference on Damage Mechanics, ICDM 1., 25-27.06.2012., Beograd, Srbija.

Čanžar, Predrag and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2011) Low-cycle Fatigue Behaviour of Nodular Cast Iron: Experiments and Numerical Modelling. = Low-cycle Fatigue Behaviour of Nodular Cast Iron: Experiments and Numerical Modelling. In: 2nd International Conference of Engineering Against Fracture, 22-24.06.2011., Mykonos, Grčka.

Čanžar, Predrag and Tonković, Zdenko and Drvar, Nenad and Bakić, Ante and Kodvanj, Janoš and Sorić, Jurica (2011) Experimental Investigation and Modelling of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. = Experimental Investigation and Modelling of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. In: Eighth International Conference on Structural Dynamics EURODYN 2011, 04-06.07.2011., Leuven, Belgija.

Galić, Ivica and Tomičević, Zvonimir and Tonković, Zdenko (2011) Fatigue testing of cast steel GP240GH. = Fatigue testing of cast steel GP240GH. In: International Conference of Engineering Against Fracture /, 22-24.06.2011, Mikonos, Grčka.

Frančeski, Joško and Tonković, Zdenko and Skozrit, Ivica and Surjak, Martin and Krstulović-Opara, Lovre and Vesenjak, Matej and Kodvanj, Janoš and Domazet, Željko (2014) Validacija numeričkog modela primjenom metoda digitalne korelacije slike i termografije. = Validation of Numerical Model by Means of Digital Image Correlation and Thermography. In: 6. susret hrvatskog društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2014) Poopćeni rubni uvjeti periodičnosti u računalnoj homogenizaciji drugog reda. = Generalized periodic boundary conditions in second-order computational homogenization. In: Šesti susret hrvatskog društva za mehaniku, 29-30. 05. 2014., Rijeka, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2013) Višerazinsko modeliranje heterogenih materijala. = Multiscale modeling of heterogeneous materials. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Slokar, Ljerka (2013) Proces deformiranja epoksidnog kompozita ojačanog staklenim vlaknima. = Deformation Processes of Short-Glass-Fiber-Filled Epoxy. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.

Skozrit, Ivica and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2013) Numeričko i eksperimentalno modeliranje procesa deformiranja polietilena PE100. = Numerical and experimental modeling of deformation process of polyethylene PE100. In: 5. susret hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.

Čanžar, Predrag and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2011) Eksperimentalno i numeričko modeliranje zamornog ponašanja nodularnog lijeva. = Experimental and numerical modeling of fatigue behaviour of nodular cast iron. In: Susret Hrvatskog društva za mehaniku (4 ; 2011), 10.06.2011., Slavonski Brod, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2011) Mikromehaničko modeliranje procesa deformiranja. = In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.

Lovrenić-Jugović, Martina and Tonković, Zdenko (2011) Numeričko modeliranje procesa puzanja kortikalnoga koštanoga tkiva. = Numerical modelling cortical bone tissue creep processes. In: Četvrti susret hrvatskog društva za mehaniku, 10.06.2011, Slavonski Brod, Hrvatska.

Marenić, Eduard and Sorić, Jurica and Tonković, Zdenko (2011) Numeričko modeliranje prijelaza s atomističkog modela na razinu mehanike kontinuuma. = Numerical modeling of atomistic-to-continuum coupling. In: Četvrti susret hrvatskog društva za mehaniku, 10.6.2011., Slavonski Brod, Hrvatska.

Skozrit, Ivica and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2011) Eksperimentalno i numeričko modeliranje zareznog djelovanja u polietilenu. = Experimental and Numerical Modelling of Notches in Polyethylene. In: Četvrti susret hrvatskog društva za mehaniku, 10.06.2011, Slavonski Brod, Hrvatska.

Skozrit, Ivica and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2012) Eksperimentalno i numeričko modeliranje zareza u polietilenu PE100. = Experimental and numerical modeling of notch in polyethylene PE100. In: 9. hrvatski seminar o tlačnoj opremi, 24.05.2012., Zagreb, Hrvatska.

Tonković, Zdenko and Skozrit, Ivica and Lesičar, Tomislav (2011) Procjena integriteta opreme pod tlakom. = Pressure Vessels Integrity Assessment. In: 8. hrvatski seminar o tlačnoj opremi, 19.05.2011, Zagreb, Hrvatska.

Stepanić, Josip and Runje, Biserka and Majetić, Dubravko and Alar, Vesna (2014) Extending the lifespan of learning outcomes applicability. = Extending the lifespan of learning outcomes applicability. In: International Professional Conference ME4CataLOgue, 04-05. 2014., Slavonski Brod, Hrvatska.

Pavković, Danijel and Komljenović, Ante and Hrgetić, Mario and Krznar, Matija (2015) Experimental characterization and development of a SoC/SoH estimator for a LiFePO4 battery cell. = Experimental characterization and development of a SoC/SoH estimator for a LiFePO4 battery cell. In: International Conference on Computer as a Tool, IEEE EUROCON 2015, 08-11.09.2015., Salamanca, Španjolska.

Pavković, Danijel and Komljenović, Ante and Hrgetić, Mario and Petrić, Joško and Smetko, Viktor (2015) Design of EKF-based SoC estimator for an ultracapacitor module. = Design of EKF-based SoC estimator for an ultracapacitor module. In: International Conference on Computer as a Tool, IEEE EUROCON 2015, 08-11.09.2015., Salamanca, Španjolska.

Pavković, Danijel and Lobrović, Mihael and Hrgetić, Mario and Komljenović, Ante (2014) A design of DC bus control system for EVs based on battery/ultracapacitor hybrid energy storage. = A design of DC bus control system for EVs based on battery/ultracapacitor hybrid energy storage. In: 2014 IEEE International Electric Vehicle Conference, IEVC 201, 17-19.12.2014., Firenza, Italija.

Sedić, Almir and Katulić, Stjepko and Pavković, Danijel (2013) Dynamics of a boiler with natural water circulation. = Dynamics of a boiler with natural water circulation. In: Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Pavković, Danijel and Hoić, Matija and Deur, Joško and Petrić, Joško (2013) Energy storage systems sizing study for airborne wind energy applications. = Energy storage systems sizing study for airborne wind energy applications. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Pavković, Danijel and Hrgetić, Mario and Komljenović, Ante (2013) Control-oriented modeling and experimental identification of an ultracapacitor module. = Control-oriented modeling and experimental identification of an ultracapacitor module. In: 17th International Conference on Electrical Drives and Power Electronics, EDPE 2013, 02-04.2013., Dubrovnik, Hrvatska.

Pavković, Danijel and Komljenović, Ante and Hrgetić, Mario (2013) Control-oriented modeling and experimental identification of a VRLA battery. = Control-oriented modeling and experimental identification of a VRLA battery. In: 17th International Conference on Electrical Drives and Power Electronics, EDPE 2013, 02-04.2013, Dubrovnik, Hrvatska.

Škugor, Branimir and Pavković, Danijel and Deur, Joško (2012) A series-parallel HEV control strategy combining SoC control and instantaneous optimisation of equivalent fuel consumption. = A series-parallel HEV control strategy combining SoC control and instantaneous optimisation of equivalent fuel consumption. In: 2nd European Electric Vehicle Congress (EEVC 2012), 19-22.11.2012., Brussels, Belgija.

Cipek, Mihael and Pavković, Danijel and Petrić, Joško (2011) A Control-oriented simulation model of a power-split hybrid electric vehicle. = A Control-oriented simulation model of a power-split hybrid electric vehicle. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2011, 25-29.09.2011., Dubrovnik, Hrvatska.

Hrgetić, Mario and Deur, Joško and Pavković, Danijel and Barber, Phil (2011) Adaptive EKF-based estimator of sideslip angle using fusion of inertial sensors and GPS. = Adaptive EKF-based estimator of sideslip angle using fusion of inertial sensors and GPS. In: SAE 2011 International Congress and Exposition, 12-14.04.2011., Detroit, MI, United States.

Pavković, Danijel and Hoić, Matija and Petrić, Joško and Herold, Zvonko and Deur, Joško (2011) An overview of energy storage systems considering renewable energy applications. = An overview of energy storage systems considering renewable energy applications. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.

Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2015) CFD modelling of Diesel spray and combustion using homogenous gas phase reactions within the Euler-Eulerian framework. = CFD modelling of Diesel spray and combustion using homogenous gas phase reactions within the Euler-Eulerian framework. In: 7th European Combustion Meeting (ECM 2015), 30.03.-02.04.2015., Budimpešta, Mađarska.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus and Schellander, David (2015) Improvement of the numerical framework for selective catalytic reduction applications. = Improvement of the numerical framework for selective catalytic reduction applications. In: 7th European Combustion Meeting (ECM 2015), 30.03.-02.04.2015., Budimpešta, Mađarska.

Boldyryev, Stanislav and Ćosić, Boris and Krajačić, Goran and Dominković, Dominic and Štefanec, Kristjan and Duić, Neven (2015) Pollution reduction in Croatian food industry via Total Site heat recovery. = Pollution reduction in Croatian food industry via Total Site heat recovery. In: 4th International Conference on Sustainability Science and Engineering, 26-29.05.2015, Balatonfured, Hungary.

Boldyryev, Stanislav and Krajačić, Goran and Duić, Neven and Novosel, Tomislav (2015) Contributing global CO2 mitigation by utilisation of food industry heat into smart Croatian DHS via Total Site heat recovery. = Contributing global CO2 mitigation by utilisation of food industry heat into smart Croatian DHS via Total Site heat recovery. In: International Conference on Smart Energy Systems and 4th Generation District Heating, 25-26.08.2015, Copenhagen, Denmark.

Dominković, Dominik Franjo and Bačeković, Ivan and Ćosić, Boris and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven and Markovska, Nataša (2015) Low Carbon Energy Supply for South East Europe. = Low Carbon Energy Supply for South East Europe. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Komušanac, Ivan and Ćosić, Boris and Perković, Luka and Duić, Neven (2015) Experience with solar-driven LiBr/H2O absorption cooling system in Vodovod Dubrovnik d.o.o. = Experience with solar-driven LiBr/H2O absorption cooling system in Vodovod Dubrovnik d.o.o. In: 12. International Conference on Accomplishment in Electrical and Mechanical Engineering and Information Technology, 29.-30.5.2015., Banja Luka, Bosna i Hercegovina.

Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Duić, Neven (2015) CFD modelling of biomass combustion in an experimental drop tube furnace. = CFD modelling of biomass combustion in an experimental drop tube furnace. In: Clean Air 2015, 5.-9.7.2015., Lisabon, Portugal.

Mikulčić, Hrvoje and Vujanović, Milan and Wang, Xuebin and Tan, Houzhang and Duić, Neven (2015) Modelling Wooden Biomass Combustion in an Vertical Experimental Furnace. = Modelling Wooden Biomass Combustion in an Vertical Experimental Furnace. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Novosel, Tomislav and Ban, Marko and Duić, Neven and Markovska, Nataša and Borozan, Vesna and Pukšec, Tomislav and Tomić, Tihomir and Krajačić, Goran (2015) Influence of district heating on future energy systems: Case study for the heat demand mapping and energy planning of the City of Osijek. = Influence of district heating on future energy systems: Case study for the heat demand mapping and energy planning of the City of Osijek. In: 17th Symposium on Thermal Science and Engineering of Serbia, 20-23.10.2015., Sokobanja, Serbia.

Novosel, Tomislav and Dedinec, Aleksandar and Ćosić, Boris and Markovska, Nataša and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven (2015) Role of district heating in energy systems with a high share of renewables – A case study for the country of Macedonia. = Role of district heating in energy systems with a high share of renewables – A case study for the country of Macedonia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Wang, Yibin and Tan, Houzhang and Du, Wenzhi and Mikulčić, Hrvoje and Duić, Neven (2015) The investigation on characterization of available salts extracted from three kinds of biomass ashes. = The investigation on characterization of available salts extracted from three kinds of biomass ashes. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Babak, Tatiana and Khavin, Gennadii and Krajačić, Goran and Duić, Neven (2014) Possibility of heat pump use in central hot water supply system. = Possibility of heat pump use in central hot water supply system. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES Ohrid 2014, 29.06.-03.07.2014., Ohrid, Makedonija.

Vujanović, Milan and Petranović, Zvonimir and Duić, Neven (2014) Modelling of Hot Diesel Injection Process Using Eulerian Multiphase Method. = Modelling of Hot Diesel Injection Process Using Eulerian Multiphase Method. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment System, 29.06-03.07.2014, Ohrid, Makedonija.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus (2014) Numerical modelling of film separation in CFD wall film module. = Numerical modelling of film separation in CFD wall film module. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus (2014) Modelling and implementation of surface tension effects into CFD wall film module. = Modelling and implementation of surface tension effects into CFD wall film module. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES Ohrid 2014, 29.06.-03.07.2014., Ohrid, Makedonija.

Batas Bjelić, Ilija and Rajaković, Nikola and Krajačić, Goran and Duić, Neven (2014) Valuing the moderation options in Serbia for higher wind penetrations. = Valuing the moderation options in Serbia for higher wind penetrations. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Dominković, Dominik Franjo and Bačelić Medić, Zlatko and Ćosić, Boris and Duić, Neven (2014) An Optimization Model for Combining Seasonal Pit Thermal Energy Storage and Biomass Trigeneration Energy System. = An Optimization Model for Combining Seasonal Pit Thermal Energy Storage and Biomass Trigeneration Energy System. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29-03.07.2014, Ohrid, Makedonija.

Gašparović, Goran and Krajačić, Goran and Duić, Neven (2014) Sustainability of Cruise Ship Conference Tourism. = Sustainability of Cruise Ship Conference Tourism. In: The 9th Conference on Sustainable Development of Energy, Water and Environment Systems, 20-27.09.2014., Venecija, Italija.

Gašparović, Goran and Prebeg, Pero and Krajačić, Goran and Duić, Neven (2014) Multi-objective Long-term Optimization of Energy Systems with High Share of Renewable Energy Resources. = Multi-objective Long-term Optimization of Energy Systems with High Share of Renewable Energy Resources. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, SEE SDEWES, Ohrid, 2014, 30.-04.07.2014., Ohrid, Makedonija.

Mikulčić, Hrvoje and Cabezas, Heriberto and Vujanović, Milan and Duić, Neven (2014) Emergy and Ecological Footprint Based Analysis of Different Cement Manufacturing Processes. = Emergy and Ecological Footprint Based Analysis of Different Cement Manufacturing Processes. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20.-27.09.2014., Venecija, Italija - Istanbul, Turska.

Novosel, Tomislav and Ćosić, Boris and Pukšec, Tomislav and Krajačić, Goran and Mustafa, Manal and Mathiesen, Brian Vad and Lund, Henrik and Duić, Neven (2014) 100% renewable energy systems using wind, PV and desalination: A case study for the country of Jordan. = 100% renewable energy systems using wind, PV and desalination: A case study for the country of Jordan. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Novosel, Tomislav and Perković, Luka and Ban, Marko and Keko, Hrvoje and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven (2014) Hourly transport energy demand modeling – Impact of EVs on the Croatian electricity grid. = Hourly transport energy demand modeling – Impact of EVs on the Croatian electricity grid. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment System, 29.06-03.07.2014, Ohrid, Makedonija.

Segurado, Raquel and Costa, Mário and Duić, Neven and Da Graça Carvalho, Maria (2014) Integrated analysis of energy and water supply in islands. Case study of S. Vicente, Cape Verde. = Integrated analysis of energy and water supply in islands. Case study of S. Vicente, Cape Verde. In: The 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2014) The O’Rourke droplet collision model for the Euler-Eulerian framework. = The O’Rourke droplet collision model for the Euler-Eulerian framework. In: 26th European Conference on Liquid Atomization and Spray Systems, 8-10.09.2014, Bremen, Njemačka.

Vujanović, Milan and Petranović, Zvonimir and Duić, Neven and Baleta, Jakov (2014) Modelling of diesel injection process using Eulerian multiphase approach. = Modelling of diesel injection process using Eulerian multiphase approach. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014S, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Lund, Henrik and Mathiesen, V. Brian and Mohsen, S. Mousa and Ashhab, S. Moh'd and Ababneh, K. Amer (2013) The desalination module in the EnergyPLAN advanced energy system analyses tool: a case study for Jordan. = The desalination module in the EnergyPLAN advanced energy system analyses tool: a case study for Jordan. In: International Conference on Integrated Renewable Energy, Desalination and Water Supply - IREDeW, 7-9.10.2013, Amman, Jordan.

Novosel, Tomislav and Pukšec, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Mohsen, S. Mousa and Ashhab, S. Moh'd and Ababneh, K. Amer (2013) The influence of renewable energy sources on Jordan's current energy system. = The influence of renewable energy sources on Jordan's current energy system. In: International Conference on Integrated Renewable Energy, Desalination and Water Supply - IREDeW, 7-9.10.2013, Amman, Jordan.

Petranović, Zvonimir and Vujanović, Milan and Duić, Neven (2013) Modelling and simulation of pollutant formation in diesel engines. = Modelling and simulation of pollutant formation in diesel engines. In: SDEWES Conference, 21-28.09.2013, Dubrovnik, Hrvatska.

Batas Bjelić, Ilija and Skokljev, Ivan and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven (2013) Integrating consumer flexibility as virtual storage option in energy system planning. = Integrating consumer flexibility as virtual storage option in energy system planning. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Mikulandrić, Robert and Krajačić, Goran and Duić, Neven and Gennadii, Khavin and Lund, Henrik and Vad Mathiesen, Brian and Østergaard, Poul (2013) Performance analysis of hybrid district heating system. = Performance analysis of hybrid district heating system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013, Dubrovnik, Hrvatska.

Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Duić, Neven (2013) CFD Simulation of Co-combustion of Biomass and Coal in a Cement Calciner. = CFD Simulation of Co-combustion of Biomass and Coal in a Cement Calciner. In: 8th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES 2013, 22.-27.09.2013., Dubrovnik, Hrvatska.

Mikulčić, Hrvoje and Vujanović, Milan and Duić, Neven (2013) CFD Simulation of Pulverized Coal Combustion in a Cement Calciner. = CFD Simulation of Pulverized Coal Combustion in a Cement Calciner. In: 8th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES 2013, 22.-27.09.2013., Dubrovnik, Hrvatska.

Novosel, Tomislav and Irsag, Bojan and Pukšec, Tomislav and Duić, Neven (2013) Economic viability of biogas plants in relation to raw material input and transportation methods. = Economic viability of biogas plants in relation to raw material input and transportation methods. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Šare, Anamarija and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven (2013) The Impact of Electrification in the Transport Sector on the Power Curve, and the Integration of Renewable Energy Sources in to the Power Systems of the Dubrovnik Region. = The Impact of Electrification in the Transport Sector on the Power Curve, and the Integration of Renewable Energy Sources in to the Power Systems of the Dubrovnik Region. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2013) Computational Fluid Dynamic Simulation of Wooden Biomass Combustion. = Computational Fluid Dynamic Simulation of Wooden Biomass Combustion. In: 6th European Combustion Meeting, 25.-28.06.2013., Lund, Švedska.

Vujanović, Milan and Duić, Neven and Tatschl, Reinhard (2013) Modeling of nitrogen pollutants in combustion systems. = Modeling of nitrogen pollutants in combustion systems. In: 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur, Malaysia, 2013., 25 - 27.06.2013., Kuala Lumpur, Malezija.

Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2013) Calcination Modelling for Cement Industry – Latest Development in FIRE. = Calcination Modelling for Cement Industry – Latest Development in FIRE. In: AVL Advanced Simulation Technologies (AST) International User Conference 2013, 18.-20.06.2013., Graz, Austria.

Baleta, Jakov and Pachler, Klaus and Vujanović, Milan and Duić, Neven (2013) Numerical investigation of wallfilm formation for SCR applications. = Numerical investigation of wallfilm formation for SCR applications. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2013) Feasibility of Serbian renewable energy policy in reaching EU2020 goals. = Feasibility of Serbian renewable energy policy in reaching EU2020 goals. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.

Cerovac, Tin and Ćosić, Boris and Pukšec, Tomislav and Duić, Neven (2013) Advanced System Analysis Using Scenario Approach – the Case Study of Croatia. = Advanced System Analysis Using Scenario Approach – the Case Study of Croatia. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.

Ćosić, Boris and Krajačić, Goran and Markovska, Nataša and Batas Bjelić, Ilija and Rajaković, Nikola and Duić, Neven (2013) 100% Renewable Energy Solutions for Regions: the Case of South East Europe. = 100% Renewable Energy Solutions for Regions: the Case of South East Europe. In: XXIX međunarodno savjetovanje ENERGETIKA 2013, 26-29.03.2013, Zlatibor, Srbija.

Ćosić, Boris and Maršić, Tomislav and Krajačić, Goran and Markovska, Nataša and Batas Bjelić, Ilija and Hasović, Zihnija and Rajaković, Nikola and Duić, Neven (2013) The Effect of Regionally Integrated Energy Systems on CO2 Emissions Reduction and Wind Integration: the Case of South East Europe. = The Effect of Regionally Integrated Energy Systems on CO2 Emissions Reduction and Wind Integration: the Case of South East Europe. In: 6th International conference on sustainable Energy and Environmental Protection, 20-23.8.2013, Maribor, Slovenija.

Ćosić, Boris and Pfeifer, Antun and Duić, Neven (2013) Energy System Planning With a High Share of Renewable Energy Sources: the Case Study of Bosnia and Herzegovina. = Energy System Planning With a High Share of Renewable Energy Sources: the Case Study of Bosnia and Herzegovina. In: 11th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, 30.06-01.07.2013, Banja Luka, Bosna i Hercegovina.

Gašparović, Goran and Krajačić, Goran and Šare, Anamarija and Duić, Neven (2013) Advanced modelling of an electric vehicle module in the H2RES energy planning software. = Advanced modelling of an electric vehicle module in the H2RES energy planning software. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, 2013-09-22-27, Dubrovnik.

Mustafa, Manal and Novosel, Tomislav and Gašparović, Goran and Duić, Neven and Krajačić, Goran (2013) Desalination and Water Storage Modeling in H2RES Energy Planning Model. = Desalination and Water Storage Modeling in H2RES Energy Planning Model. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.

Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Mohsen, Mousa and Ashhab, Sami and Ababneh, Amer (2013) Potential for the penetration of renewable energy sources in Jordan’s energy system. = Potential for the penetration of renewable energy sources in Jordan’s energy system. In: CAPE FORUM 2013, 7-10.04.2013., Graz, Austrija.

Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Mohsen, S. Mousa and Ashhab, S. Moh'd and Ababneh, K. Amer (2013) The Influence of Renewable Energy Sources and Energy Storage Technologies on Fuel Consumption in Jordan. = The Influence of Renewable Energy Sources and Energy Storage Technologies on Fuel Consumption in Jordan. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.

Perković, Luka and Ban, Marko and Krajačić, Goran and Duić, Neven (2013) Receding horizon model predictive control for smart management of microgrids under the day-ahead electricity market. = Receding horizon model predictive control for smart management of microgrids under the day-ahead electricity market. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2013) Validation of Eulerian-Eulerian Approach for Diesel Sprays, and 3D Coupling with Lagrangian Spray Approach. = Validation of Eulerian-Eulerian Approach for Diesel Sprays, and 3D Coupling with Lagrangian Spray Approach. In: 25th European Conference on Liquid Atomization and Spray Systems, 01.-04.09.2013., Chania, Kreta.

Petruschke, Philipp and Gašparović, Goran and Voll, Philip and Krajačić, Goran and Duić, Neven and Bardow, Andre (2013) RenewIslands meets optimization: Efficient synthesis of renewable energy systems. = RenewIslands meets optimization: Efficient synthesis of renewable energy systems. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, 2013-09-22-27, Dubrovnik.

Pukšec, Tomislav and Mathiesen, Brian Vad and Novosel, Tomislav and Duić, Neven (2013) Energy demand modelling and GHG emission reduction: case study Croatia. = Energy demand modelling and GHG emission reduction: case study Croatia. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.

Bačelić Medić, Zlatko and Pukšec, Tomislav and Mathiesen, Brian Vad and Duić, Neven (2012) Modelling energy demand of Croatian industry sector. = Modelling energy demand of Croatian industry sector. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 01-07.07.2012., Ohrid, Makedonija.

Khavin, Gennadiy L. and Kapustenko, Petro O. and Boldyryev, Stanislav and Duić, Neven (2012) Analysis of more efficient and sustainable future district heating networks. = Analysis of more efficient and sustainable future district heating networks. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems, 01-07.07.2012., Ohrid, Makedonija.

Mikulčić, Hrvoje and Markovska, Nataša and Vujanović, Milan and Filkoski, Risto V. and Ban, Marko and Duić, Neven (2012) Potential for CO2 emission reduction in the cement industry. = Potential for CO2 emission reduction in the cement industry. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 01.-07.07.2012., Ohrid, Makedonija.

Pukšec, Tomislav and Lulić, Zoran and Mathiesen, Brian Vad and Duić, Neven (2012) Energy Policy and Long Term Energy Demand of a Transport Sector: Case Study Croatia. = Energy Policy and Long Term Energy Demand of a Transport Sector: Case Study Croatia. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 01-07.07.2012., Ohrid, Makedonija.

Ban, Marko and Perković, Luka and Duić, Neven (2012) Mapping the High Altitude Wind Energy in Southeast Europe. = Mapping the High Altitude Wind Energy in Southeast Europe. In: 7th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2012, 01-06.07.2012., Ohrid, Makedonija.

Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2012) Optimal wind power generation in existing Serbian power system. = Optimal wind power generation in existing Serbian power system. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 1-07.07.2012, Skoplje, Makedonija.

Ćosić, Boris and Bačelić Medić, Zlatko and Duić, Neven (2012) 100% Renewable Energy Systems of Islands: the Case of Island of Hvar. = 100% Renewable Energy Systems of Islands: the Case of Island of Hvar. In: 10th International Symposium Power and Process Plants and 5th International Forum on Renewable Energy Sources, 24-26.10.2012., Rovinj, Hrvatska.

Ćosić, Boris and Krajačić, Goran and Markovska, Nataša and Duić, Neven and Batas Bjelić, Ilija (2012) Regional Approach for a 100% Renewable Energy Systems: The Case of South East Europe. = Regional Approach for a 100% Renewable Energy Systems: The Case of South East Europe. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 1-07.07.2012, Skoplje, Makedonija.

Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Mohsen, S. Mousa and Duić, Neven (2012) Integration of Renewables and Water Supply: the Case of Jordan. = Integration of Renewables and Water Supply: the Case of Jordan. In: 2nd International 100% Renewable Energy Conference and Exhibition, 28-30.06.2012, Istanbul, Turska.

Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Mohsen, S. Mousa and Duić, Neven (2012) The importance of Jordan’s Red Sea-Dead Sea project for the integration of high share of intermittent renewable energy sources. = The importance of Jordan’s Red Sea-Dead Sea project for the integration of high share of intermittent renewable energy sources. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 1-07.07.2012, Ohrid, Makedonija.

Schneider, Daniel Rolph and Sanopoulos, Dimitris and Mohsen, Mousa and Vad Mathiesen, Brian and Voutetakis, Paris and Krajačić, Goran and Duić, Neven (2012) Improving capacity of Jordanian Research in Integrated Renewable Energy and Water supply - JoRIEW project. = Improving capacity of Jordanian Research in Integrated Renewable Energy and Water supply - JoRIEW project. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 01-07.07.2012., Ohrid, Makedonija.

Pukšec, Tomislav and Duić, Neven (2011) Energetska politika i dugoročna potrošnja energije u sektoru kućanstva u Hrvatskoj. = Energy policy and long term energy demand in Croatian households sector. In: 20. forum Hrvatskog energetskog društva "Treći paket i ostale direktive iz energetike", 18.11.2011., Zagreb, Hrvatska.

Ban, Marko and Krajačić, Goran and Grozdek, Marino and Ćurko, Tonko and Duić, Neven (2011) The Role of Cool Thermal Energy Storage in Integration of Renewable Energy Sources and Peak Load Reduction. = The Role of Cool Thermal Energy Storage in Integration of Renewable Energy Sources and Peak Load Reduction. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.

Ćosić, Boris and Krajačić, Goran and Duić, Neven (2011) Towards 100% renewable energy system: the case of Macedonia. = Towards 100% renewable energy system: the case of Macedonia. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011, Dubrovnik, Hrvatska.

Irsag, Bojan and Pukšec, Tomislav and Duić, Neven (2011) Long term energy demand projection and potential for energy savings of Croatian tourist-catering trade sector. = Long term energy demand projection and potential for energy savings of Croatian tourist-catering trade sector. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011, Dubrovnik, Hrvatska.

Krajačić, Goran and Duić, Neven and Lončar, Dražen and Raguzin, Igor (2011) Large Scale Integration of Wind Energy by Financial Mechanisms for Support of Pumped Hydro Storage Installations. = Large Scale Integration of Wind Energy by Financial Mechanisms for Support of Pumped Hydro Storage Installations. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.

Krajačić, Goran and Šakić, Nikola and Duić, Neven and Lončar, Dražen (2011) Prediction of Wind Power Plants Energy Production by use of the Publicly Available Wind Measurement Data. = Prediction of Wind Power Plants Energy Production by use of the Publicly Available Wind Measurement Data. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.

Mikulčić, Hrvoje and Minić, Ivica and Von Berg, Eberhard and Fidaros, Dimitris K. and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven and Stefanović, Gordana (2011) Reducing CO2 emissions in cement industry-the calcination model. = Reducing CO2 emissions in cement industry – the calcination model. In: ECOS 2011 - The 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 04.-07.07.2011., Novi Sad, Srbija.

Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2011) CFD simulation of calcination process for cement production - model implementation and validation. = CFD simulation of calcination process for cement production - model implementation and validation. In: 9th European Conference on Industrial Furnaces and Boilers, 26.-29.04.2011., Estoril, Portugal.

Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2011) Numerical Modelling of Calcination Reaction Mechanism. = Numerical Modelling of Calcination Reaction Mechanism. In: 5th European Combustion Meeting, 28.6.-1.7.2011., Cardiff, Wales, UK.

Mikulčić, Hrvoje and Vujanović, Milan and Duić, Neven (2011) Reducing the CO2 emissions in Croatia’s cement industry – the pre-calciner model. = Reducing the CO2 emissions in Croatia’s cement industry – the pre-calciner model. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environmental Systems, 25.-29.09.2011., Dubrovnik, Hrvatska.

Pavković, Dragomir and Pukšec, Tomislav and Duić, Neven (2011) Energy demand modelling for the Croatian education sector. = Energy demand modelling for the Croatian education sector. In: 21 st. INTERNATIONAL SYMPOSIUM ON HEATING, REFRIGERATING AND AIR CONDITIONING, 07-08.04.2011., Zagreb.

Pukšec, Tomislav and Mathiesen, Brian Vad and Duić, Neven (2011) Potentials for energy savings and long term energy demands for Croatian households sector. = Potentials for energy savings and long term energy demands for Croatian households sector. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.

Sanopoulos, Dimitris and Ćosić, Boris and Mohsen, S. Mousa and Krajačić, Goran and Duić, Neven (2011) Renewable Energy Solutions for the Regions: Integrated Approach to Energy and Water Systems. = Renewable Energy Solutions for the Regions: Integrated Approach to Energy and Water Systems. In: 12th International Conference on Environmental Science and Technology CEST2011, 08-10.09.2011., Rodos, Grčka.

Markovska, Nataša and Taseska-Gjorgievska, Verica and Dedinec, Aleksandar and Obradovic Grncarovska, Teodora and Duić, Neven and Pop-Jordanov, Jordan and Kanevce, Gligor (2014) EU 2030 climate targets - a perspective of an EU candidate country. = EU 2030 climate targets - a perspective of an EU candidate country. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29.06.-03.07.2014., Ohrid, Makedonija.

Katić, Katarina and Perković, Luka and Krajačić, Goran and Duić, Neven and Ban, Marko and Novosel, Tomislav (2013) Application of the Four Step Model in Energy Planning of Electric Vehicles – Case study for the City of Zagreb, Croatia. = Application of the Four Step Model in Energy Planning of Electric Vehicles – Case study for the City of Zagreb, Croatia. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Perković, Luka and Priesching, Peter and Duić, Neven (2013) Large eddy simulation of two significantly different turbulent premixed flames in the framework of SGS model based on coherent structures. = Large eddy simulation of two significantly different turbulent premixed flames in the framework of SGS model based on coherent structures. In: 6th European Combustion Meeting, 25.-28.06.2013., Lund, Švedska.

Duić, Neven and Krajačić, Goran and Pukšec, Tomislav and Ćosić, Boris and Novosel, Tomislav and Ridjan, Iva (2012) Iskorištavanje obnovljivih izvora energije, energetska učinkovitost i smanjenje emisija stakleničkih plinova kao pokretač razvoja “zelene ekonomije” u Hrvatskoj do 2050. = Renewable Energy Sources, Energy Efficiency and Reduction of Greenhouse Gas Emissions as main sources of Development of „Green Economy“ in Croatia until 2050. In: 21. Forum: Dan energije u Hrvatskoj, 23.11.2012., Zagreb, Hrvatska.

Živić, Marija and Galović, Antun and Virag, Zdravko (2013) Application of numerical and lumped capacitance method for cooling of bodies immersed in water. = Application of numerical and lumped capacitance method for cooling of bodies immersed in water. In: 5th International Scientific and Expert Conference of the International TEAM Society, 04.-06.11.2013, Prešov, Slovak Republic.

Lulić, Fabijan and Virag, Zdravko and Korade, Ivan (2014) Comparison from invasive and non-invasive method. = Comparison from invasive and non-invasive method. In: 31th Danubia-Adria Symposium, 24.-27.09.2014., Kempten, Germany.

Korade, Ivan and Virag, Zdravko and Šavar, Mario (2012) A method of characteristics for one-dimensional fluid flow in viscoelastic tubes. = A method of characteristics for one-dimensional fluid flow in viscoelastic tubes. In: 7th International Congress of Croatian Society of Mechanics, 22-25.05.2012., Zadar, Hrvatska.

Krizmanić, Severino and Virag, Zdravko and Džijan, Ivo (2012) A novel pressure-velocity coupling algorithm. = A novel pressure-velocity coupling algorithm. In: 7th International Congress of Croatian Society of Mechanics, 22-25.05.2012., Zadar, Hrvatska.

Majić, Frane and Virag, Zdravko (2012) Aerodynamics of iced airfoil simulated by RANS code. = Aerodynamics of iced airfoil simulated by RANS code. In: 7th International Congress of Croatian Society of Mechanics, 22-25.05.2012., Zadar, Hrvatska.

Virag, Zdravko and Lulić, Fabijan and Korade, Ivan (2012) A four element visco-elastic windkessel model of the arterial tree. = A four element visco-elastic windkessel model of the arterial tree. In: 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics, 26.-29.09.2012., Beograd, Srbija.

Lulić, Fabijan and Virag, Zdravko (2011) Impact of coronary flow on parameters of a lumped model of the arterial tree. = Impact of coronary flow on parameters of a lumped model of the arterial tree. In: 28th Danubia-Adria-Symposium on Advances in Experimental Mechanics, 28.09.-01.10.2011., Siofok, Mađarska.

Korade, Ivan and Virag, Zdravko and Krizmanić, Severino (2014) Procjena mogućnosti mjerenja lokalnih parametara viskoelastične arterijske stijenke. = Assessing the possibilities of measuring local viscoelastic parameters of the arterial wall. In: 6. susret Hrvatskog društva za mehaniku, 29-30. 05. 2014., Rijeka, Hrvatska.

Korade, Ivan and Virag, Zdravko and Korbar, Radoslav (2013) Analiza pulsirajućeg strujanja u cijevi. = Analysis of oscillatory pipe flow. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.

Majić, Frane and Petrovčić, Matija and Virag, Zdravko (2011) Analiza aerodinamičkih karakteristika aeroprofila s nakupinom leda. = Aerodynamic characteristics of airfoil with ice accumulation. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.

Virag, Zdravko and Korbar, Radoslav and Šavar, Mario (2010) Matematički modeli hidrauličkog udara. = Mathematical models of waterhammer. In: 3. susret Hrvatskog društva za mehaniku, Osijek, Hrvatska.

Šavar, Mario and Wolf, Hinko and Sutlović, Igor (2015) Rehabilitacija cjevovodnih sustava. = In: 13th Natural Gas, Heat and Water Conference/6th International Natural Gas, Heat and Water Conference, 23-25. 09. 2015., Osijek, Hrvatska.

Šavar, Mario and Džijan, Ivo and Mikulčić, Hrvoje and Kuhar, Matija (2011) Strategija održavanja cjevovodnih sustava. = Maintain strategy of pipeline networks. In: Međunarodni kongres Dani inženjera strojarstva (2 ; 2011), 23.-26.03.2011, Split, Hrvatska.

Šavar, Mario and Pacak, Matija and Džijan, Ivo and Korade, Ivan (2011) Koeficijent otpora poroznog zida. = Resistance coefficient of porous wall. In: Četvrti susret Hrvatskog društva za mehaniku, 10. lipnja 2011., Slavonski brod, Croatia.

Cvijetić, Gregor and Jasak, Hrvoje and Vukčević, Vuko (2016) Finite volume implementation of the harmonic balance method for periodic non–linear flows. = Finite volume implementation of the harmonic balance method for periodic non–linear flows. In: 54th AIAA Aerospace Sciences Meeting: AIAA SciTech, 4-8.01.2016., San Diego, Kalifornija.

Contento, Giorgio and Lupieri, Guido and Jasak, Hrvoje and Vukčević, Vuko (2015) Numerical Study of Unsteady Breaking Waves Induced by a Submerged Hydrofoil at Steady Forward Speed. = Numerical Study of Unsteady Breaking Waves Induced by a Submerged Hydrofoil at Steady Forward Speed. In: NAV 2015 18th International Conference on Ships and Shipping Research, 24-26.6.2015., Lecco, Italija.

de Arujo, Manuel Silvino Batalha and Fernandes, Celio and Ferras, Luis Lima and Tuković, Željko and Jasak, Hrvoje and Nobrega, Joao Miguel (2015) Implementation of integral viscoelastic constitutive models in OpenFOAM® computational library. = Implementation of integral viscoelastic constitutive models in OpenFOAM® computational library. In: Novel Trends in Rheology VI, 28-29.7.2015., Zlin, Ceska.

Gatin, Inno and Jasak, Hrvoje and Vukčević, Vuko (2015) Validation and Verification of Steady Resistance KCS Simulations with Sinkage and Trim using Embedded Free Surface Method. = Validation and Verification of Steady Resistance KCS Simulations with Sinkage and Trim using Embedded Free Surface Method. In: Tokyo 2015 A Workshop on CFD in Ship Hydrodynamics, 2.-4.12.2015., Tokyo, Japan.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2015) CFD Validation of a Container Ship in Calm Water and Head Seas. = CFD Validation of a Container Ship in Calm Water and Head Seas. In: 18th Numerical Towing Tank Symposium, 28.09.-30.09.2015., Cortona, Italija.

Vukčević, Vuko and Jasak, Hrvoje and Malenica, Šime (2015) Solution and domain decomposition model for marine hydrodynamics: RANS and potential flow coupling. = Solution and domain decomposition model for marine hydrodynamics: RANS and potential flow coupling. In: VI International Conference on Computational Methods in Marine Engineering, 15 -17.06.2015., Rim, Italija.

Vukčević, Vuko and Jasak, Hrvoje (2015) Seakeeping Validation and Verification Using Decomposition Model Based on Embedded Free Surface Method. = Seakeeping Validation and Verification Using Decomposition Model Based on Embedded Free Surface Method. In: Tokyo 2015 A Workshop on CFD in Ship Hydrodynamics, 2.-4.12.2015., Tokyo, Japan.

Vukčević, Vuko and Jasak, Hrvoje and Malenica, Šime (2015) Assessment of Higher–Order Forces on a Vertical Cylinder with Decomposition Model Based on SWENSE Method. = Assessment of Higher–Order Forces on a Vertical Cylinder with Decomposition Model Based on SWENSE Method. In: 18th Numerical Towing Tank Symposium, 28.09.-30.09.2015., Cortona, Italija.

Jasak, Hrvoje and Vukčević, Vuko and Christ, Dominik (2014) Rapid Free Surface Simulation for Steady-State Hull Resistance with FVM using OpenFOAM. = Rapid Free Surface Simulation for Steady-State Hull Resistance with FVM using OpenFOAM. In: 30 Symposium on Naval Hydrodynamics, 2-7.11.2014., Hobart, Tasmanija.

Beaudoin, M. and Nilsson, H. and Page, M. and Jasak, Hrvoje (2014) Evaluation of an improved mixing plane interface for OpenFOAM. = Evaluation of an improved mixing plane interface for OpenFOAM. In: 27th IAHR Symposium on Hydraulic Machinery and Systems, 22-26.09.2014., Montreal, Kanada.

Jasak, Hrvoje and Beaudoin, Martin (2011) OpenFOAM turbo tools: from general purpose CFD to turbomachinery simulations. = OpenFOAM turbo tools: from general purpose CFD to turbomachinery simulations. In: ASME-JSME-KSME Joint Fluids Engineering Conference 2011, 24-29.07.2011., Hamamatsu, Shizuoka, Japan.

Favero, J.L. and Cardozo, N.S.M. and Secchi, A.R. and Jasak, Hrvoje Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam Solver. = Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam Solver. In: 20th European Symposium on Computer Aided Process Engineering ESCAPE20, lipanj 2010., Ischia, Napulj, Italija.

Favero, J.L. and Secchi, A.R. and Cardozo, N.S.M. and Jasak, Hrvoje (2010) Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam solver. = Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam solver. In: European Symposium on Computer Aided Process Engineering (20 ; 2010).

Boutanious, Ziad and Jasak, Hrvoje (2015) Viscous Treatment of the Snow Phase in Eulerian-Eulerian Simulations of Drifting Snow. = Viscous Treatment of the Snow Phase in Eulerian-Eulerian Simulations of Drifting Snow. In: 14th International Conference on Wind Engineering, 21.-26.6.2015., Porto Allegre, Brazil.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2014) Primjena Naval Hydro Paketa za Proračun Valnih Opterećenja. = Application of the Naval Hydro Pack for Wave Loads Assessment. In: Šesti susret Hrvatskoga društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Vukčević, Vuko and Jasak, Hrvoje (2014) Primjena Naval Hydro Paketa za Dvofazna Strujanja. = In: Šesti susret Hrvatskoga društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Kozmar, Hrvoje and Barić, Emil and Džijan, Ivo (2012) Computational simulation of wind flow behind a rectangular building. = Computational simulation of wind flow behind a rectangular building. In: 7th International Congress of Croatian Society of Mechanics, 22.-25.05.2012., Zadar, Hrvatska.

Andreu, Javier Felipe and Schneider, Daniel Rolph and Krajačić, Goran (2015) Evaluation of integration of solar energy into the district heating system of the City of Velika Gorica. = Evaluation of integration of solar energy into the district heating system of the City of Velika Gorica. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Tomić, Tihomir and Ćosić, Boris and Schneider, Daniel Rolph (2015) Economic viability of biomass and MSW-fuelled district heating system: case of the city of Zagreb. = Economic viability of biomass and MSW-fuelled district heating system: case of the city of Zagreb. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Vrandečić, Tin and Horina, Alen and Schneider, Daniel Rolph (2015) Stirling Engine CCHP Plant Fueled by Biomass and Biogas from Biowaste and Waste Water Treatment. = Stirling Engine CCHP Plant Fueled by Biomass and Biogas from Biowaste and Waste Water Treatment. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Hublin, Andrea and Schneider, Daniel Rolph and Džodan, Janko (2013) Utilization of biogas produced by anaerobic digestion of agro-industrial waste: energy, economic and environmental effects. = Utilization of biogas produced by anaerobic digestion of agro-industrial waste: energy, economic and environmental effects. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.

Mikulandrić, Robert and Lončar, Dražen and Schneider, Daniel Rolph and Franković, Valdi (2011) Improvement of Environmental Aspects of Thermal Power Plant Operation by Advanced Control Concepts. = Improvement of Environmental Aspects of Thermal Power Plant Operation by Advanced Control Concepts. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES2011), 25–29.09.2011., Dubrovnik, Hrvatska.

Schneider, Daniel Rolph and Kirac, Mislav and Hublin, Andrea (2011) Cost-Effectiveness of Measures for GHG Emission Reduction and Energy Recovery in Waste Management in Croatia. = Cost-Effectiveness of Measures for GHG Emission Reduction and Energy Recovery in Waste Management in Croatia. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES2011), 25–29.09.2011., Dubrovnik, Hrvatska.

Dobrović, Slaven and Juretić, Hrvoje and Ljubas, Davor and Vinković Vrček, Ivana and Milić, Mirta and Kopjar, Nevenka and Nemet, Ina and Jerić, Ivanka (2011) Nanosilver in the glass of water - a comprehensive identification of disinfection by-products and assessment of mutagenicity of disinfected drinking water in the presence of nanosilver. = Nanosilver in the glass of water - a comprehensive identification of disinfection by-products and assessment of mutagenicity of disinfected drinking water in the presence of nanosilver. In: Fourth IWA Specialty Conference on Natural Organic Matter "From Source to Tap and Beyond", 27-29. 07. 2011., Costa Mesa, Kalifornija, SAD.

Dobrović, Slaven and Zebić Avdičević, Maja and Roksandić, Roko (2015) Provjera radnih karakteristika ultrafiltracijske membrane pri obradi kišnice različite kvalitete. = Performance evaluation of the ultrafiltration membrane with rainwater of different quality. In: 6. Hrvatska konferencija o vodama s međunarodnim sudjelovanjem - Hrvatske vode na investicijskom valu, 20-23. 05. 2015., Opatija, Hrvatska.

Dobrović, Slaven and Ljubas, Davor and Džeko, Alen (2011) Analiza mogućnosti opskrbe otoka Lastova pitkom vodom korištenjem LCA metodologije. = Analysis of the potable water supply alternatives of the island of Lastovo using LCA methodology. In: Hrvatske vode pred izazovom klimatskih promjena, 18-21.05.2011., Opatija, Hrvatska.

Dobrović, Slaven and Juretić, Hrvoje and Ljubas, Davor and Smoljanić, Goran (2012) Sustavno laboratorijsko istraživanje kao preduvjet za odabir najprikladnijeg dezinfekcijskog sredstva: klor ili klorov dioksid? = Systematic laboratory research as a prerequisite for the selection of the most appropriate disinfectant: chlorine or chlorine dioxide? In: Aktualna problematika u vodoopskrbi i odvodnji, 24.-28.10.2012., Bol, Hrvatska.

Kozmar, Hrvoje and Allori, Davide and Bartoli, Gianni and Borri, Claudio (2015) Offshore wind-turbine wake in the vicinity of coastal mountains and islands. = Offshore wind-turbine wake in the vicinity of coastal mountains and islands. In: 14th International Conference on Wind Engineering, 21.-26.06.2015., Porto Alegre, Brazil.

Kozmar, Hrvoje and Allori, Davide and Marino, Enzo and Bartoli, Gianni and Borri, Claudio (2014) Wake characteristics of an offshore wind turbine in the vicinity of a coastal mountain. = Wake characteristics of an offshore wind turbine in the vicinity of a coastal mountain. In: XIII Conference of the Italian Association for Wind Engineering, 22.-25.06.2014., Genova, Italija.

Kozmar, Hrvoje and Lepri, Petra and Večenaj, Željko and Grisogono, Branko (2014) Velocity profile of the gusty Bora wind. = Velocity profile of the gusty Bora wind. In: XIII Conference of the Italian Association for Wind Engineering, 22.-25.06.2014., Genova, Italija.

Kozmar, Hrvoje and Juretić, Franjo (2012) Reynolds stress modeling in computational simulations of the urban atmospheric boundary layer flow. = Reynolds stress modeling in computational simulations of the urban atmospheric boundary layer flow. In: 7th International Congress of Croatian Society of Mechanics, 22.-25.05.2012., Zadar, Hrvatska.

Kozmar, Hrvoje and Butler, Kyle and Kareem, Ahsan (2012) Aerodynamic loads on vehicles due to the gusty bora wind. = Aerodynamic loads on vehicles due to the gusty bora wind. In: 7th International Congress of Croatian Society of Mechanics, 22.-25.05.2012., Zadar, Hrvatska.

Kozmar, Hrvoje and Jokić, Marko and Stegić, Milenko and Butler, Kyle and Kareem, Ahsan (2011) A data-driven model for transient cross-wind loads on vehicles. = A data-driven model for transient cross-wind loads on vehicles. In: 13th International Conference on Wind Engineering, 11.-15.07.2011., Amsterdam, Nizozemska.

Kozmar, Hrvoje and Butler, Kyle and Kareem, Ahsan (2011) Effects of the cross-wind gust strength on vehicle aerodynamics. = Effects of the cross-wind gust strength on vehicle aerodynamics. In: 13th International Conference on Wind Engineering, 11.-15.07.2011., Amsterdam, Nizozemska.

Ljubas, Davor and Turčić, Hrvoje and Zebić Avdičević, Maja (2014) Degradation of azo-dye aqueous solution using TiO2 nanoparticles irradiated with natural solar and artificial solar-like radiation. = Degradation of azo-dye aqueous solution using TiO2 nanoparticles irradiated with natural solar and artificial solar-like radiation. In: MATRIB 2014: materials, tribology, recycling, 26.-28.06.2014., Vela Luka, Hrvatska.

Ljubas, Davor and Bačić, Ivana and Ćurković, Lidija and Marinović, Veronika (2012) Karakterizacija sol-gel TiO2 praha IR-spektroskopijom. = Characterization of sol-gel TiO2 powder by means of the IR-spectroscopy. In: International Conference on Materials, Tribology, Recycling, 20-22.06.2012., Vela Luka, Hrvatska.

Smoljanić, Goran and Ljubas, Davor (2013) Dinamika stvaranja i taloženja kamenca u toplovodnom sustavu pri 55, 65 i 75 °C. = Dynamics of scale formation and deposition in hot water system at 55, 65 and 75 °C. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji ; 11. Konferencija o termografiji, 11.04.2013., Zagreb, Republika Hrvatska.

Mikulandrić, Robert and Lončar, Dražen and Böhning, Dorith and Böhme, Rene and Beckmann, Michael Dynamic modelling of biomass gasification processes in fixed bed gasifiers. = Dynamic modelling of biomass gasification processes in fixed bed gasifiers. In: Conference on Sustainable Development of Energy, Water and Environment Systems, 27.09-03.10.2015, Dubrovnik, Hrvatska.

Barbarić, Marina and Lončar, Dražen (2015) Strategies for micro-grid operation in grid-connected mode. = Strategies for micro-grid operation in grid-connected mode. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Balić, Dražen and Maljković, Danica and Lončar, Dražen (2015) District heating system as a dynamical energy storage – opportunities and limitations. = District heating system as a dynamical energy storage – opportunities and limitations. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09-2.10. 2015., Dubrovnik, Croatia.

Marušić, Ante and Lončar, Dražen and Batelić, Jakov and Franković, Valdi (2015) Increasing flexibility of coal power plant by control system modifications. = Increasing flexibility of coal power plant by control system modifications. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Lončar, Dražen and Balić, Dražen (2013) Impact of fluctuating electricity prices on operation strategy of trigeneration system. = Impact of fluctuating electricity prices on operation strategy of trigeneration system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27, September, 2013, Dubrovnik, Hrvatska.

Marušić, Ante and Lončar, Dražen (2013) Modela based operating strategy of combined cycle cogeneration plant. = Modela based operating strategy of combined cycle cogeneration plant. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22.-27.09.2013., Dubrovnik, Hrvatska.

Mikulandrić, Robert and Lončar, Dražen and Böhning, Dorith and Böhme, Rene (2013) Biomass gasification process modelling approaches. = Biomass gasification process modelling approaches. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22.-27.09.2013., Dubrovnik, Hrvatska.

Čehil, Mislav and Bogdan, Željko and Lončar, Dražen and Katulić, Stjepko (2011) Working fluid selection in steam cycle with heat recovery steam generator. = Working fluid selection in steam cycle with heat recovery steam generator. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.11.2011., Dubrovnik, Hrvatska.

Lončar, Dražen and Ridjan, Iva (2011) Medium Term Development Prospects of Cogeneration District Heating Systems in Transition Country – a Croatian Case. = Medium Term Development Prospects of Cogeneration District Heating Systems in Transition Country – a Croatian Case. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2011, 25-29.09.2011., Dubrovnik, Hrvatska.

Katulić, Stjepko and Čehil, Mislav and Bogdan, Željko (2012) Optimization of Cogeneration Power Plant Operation Coupled with Heat Storage Tank Used for District Heating of Zagreb Area, Croatia. = Optimization of Cogeneration Power Plant Operation Coupled with Heat Storage Tank Used for District Heating of Zagreb Area, Croatia. In: 7th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 01-07.07. 2012., Ohrid, Makedonia.

Criscione, Antonio and Kintea, Daniel and Tuković, Željko and Jakirlic, Suad and Roisman, Ilia V. and Tropea, Cameron (2012) On Computational Investigation of the Supercooled Stefan Problem. = On Computational Investigation of the Supercooled Stefan Problem. In: 12th International Conference on Liquid Atomization and Spray Systems ICLASS 2012, 02-06.09.2012., Heidelberg, Germany.

Juretić, Hrvoje and Smoljanić, Goran and Ahac, Igor (2015) Removal of natural organic matter from surface waters by enhanced coagulation. = Removal of natural organic matter from surface waters by enhanced coagulation. In: 11th International Conference Laboratory Competence 2015, 21-24.10.2015., Zadar, Hrvatska.

Boldyryev, Stanislav and Krajačić, Goran (2015) Targeting of Trade-Off for Total Site Heat Recovery. = Targeting of Trade-Off for Total Site Heat Recovery. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09-2.10.2015, Dubrovnik, Croatia.

Boldyryev, Stanislav and Mikulčić, Hrvoje and Mohorović, Zoran and Vujanović, Milan and Krajačić, Goran (2015) Heat Recovery and CHP Approach for Site of Cement Plant. = Heat Recovery and CHP Approach for Site of Cement Plant. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Gašparović, Goran and Kilkis, Siir and Krajačić, Goran (2015) Sustainability Comparison of Campus and Community Microgrids through SDEWES Index and H2RES. = Sustainability Comparison of Campus and Community Microgrids through SDEWES Index and H2RES. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, Dubrovnik 2015, 27.09.-02.10.2015., Hrvatska.

Gašparović, Goran and Prebeg, Pero and Krajačić, Goran (2015) Application of Multi-objective Optimization to a Long-term Design of Croatian National Energy System. = Application of Multi-objective Optimization to a Long-term Design of Croatian National Energy System. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, Dubrovnik 2015, 27.09.-02.10.2015., Hrvatska.

Matak, Nikola and Krajačić, Goran and Pilato, Ana Marija (2015) Joint Sustainable energy action plan for municipalities of the Korcula island according to the option 2 of the Covenant of Mayors. = Joint Sustainable energy action plan for municipalities of the Korcula island according to the option 2 of the Covenant of Mayors. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Pfeifer, Antun and Gašparović, Goran and Krajačić, Goran (2015) Integration of transport and renewable energy sectors in 100% renewable islands communities - Case study Lastovo. = Integration of transport and renewable energy sectors in 100% renewable islands communities - Case study Lastovo. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, Dubrovnik 2015, 27.09.-02.10.2015., Hrvatska.

Bogdan, Željko (2011) Analysis of Reheater Size Impact on Power Plant Performance. = Analysis of Reheater Size Impact on Power Plant Performance. In: 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT, 11-13.07.2011., Pointe Aux Piments, Mauritius.

Turković, Tin and Bogdan, Željko and Jurković, Miljenko (2011) Heating System in the Ancient World: the Example of the Southwestern Balneum in Diocletian's Palace in Split. = Heating System in the Ancient World: the Example of the Southwestern Balneum in Diocletian's Palace in Split. In: 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 11-13. 07. 2011., Pointe Aux Piments, Mauricijus.

Baleta, Jakov and Mikulčić, Hrvoje and Vujanović, Milan (2015) Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. = Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Hu, Zhongfa and Wang, Xuebin and Luo, Xiaotao and Tan, Houzhang and Mikulčić, Hrvoje and Vujanović, Milan (2015) Particulate Matter and Gas Pollutant Emissions of Biomass Co-firing: an Experimental Study in Drop Tube Furnace. = Particulate Matter and Gas Pollutant Emissions of Biomass Co-firing: an Experimental Study in Drop Tube Furnace. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015, Dubrovnik, Hrvatska.

Vujanović, Milan and Petranović, Zvonimir (2015) Modelling the spray and combustion processes in diesel engine using coupled Euler-Eulerian and Euler-Lagrangian approach. = Modelling the spray and combustion processes in diesel engine using coupled Euler-Eulerian and Euler-Lagrangian approach. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.09.2015.-02.10.2015., Dubrovnik, Republika Hrvatska.

Holik, Mario and Zmaić, Željko and Krizmanić, Severino (2012) Cooling of water in a cavity by natural convection – comparison of numerical results. = Cooling of water in a cavity by natural convection – comparison of numerical results. In: 4th International Scientific and Expert Conference TEAM 2012, 17-19. 09. 2012., Slavonski Brod, Hrvatska.

Holik, Mario and Krizmanić, Severino and Ferdelji, Nenad and Živić, Marija and Galović, Antun (2013) Zagrijavanje vode prirodnom konvekcijom pomoću horizontalno uronjenog grijača. = Water heating by natural convection with horizontal immersed heater. In: 5. susret Hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.

Gorenc, Dalibor and Ladišić, Ivan and Krizmanić, Severino and Štih, Željko (2011) Simulacija prekidanja struje u komori visokonaponskog SF6 prekidaca 123kV. = Simulation of current interruption in high-voltage SF6 circuit breaker chamber 123 kV. In: 10. savjetovanje HRO CIGRÉ, Cavtat, 6. – 10. studenoga 2011, 06.-10.11.2011, Cavtat, Hrvatska.

Ćosić, Boris and Dominković, Dominik Franjo and Ban, Marko and Perković, Luka (2015) Location optimization for biomass trigeneration system with pit thermal energy storage: the case of the city of Petrinja. = Location optimization for biomass trigeneration system with pit thermal energy storage: the case of the city of Petrinja. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Đukić, Ankica and Güttler, Ivan and Pašičko, Robert (2015) Perspectives of hydrogen automotive applications in Croatia. = Perspectives of hydrogen automotive applications in Croatia. In: Global Conference on Global Warming, 24-27.5.2015., Atena, Grčka.

Đukić, Ankica and Güttler, Ivan and Pašičko, Robert (2015) Forecasting future impact of hydrogen powered vehicles on power system development in Croatia. = Forecasting future impact of hydrogen powered vehicles on power system development in Croatia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Firak, Mihajlo and Đukić, Ankica (2015) Hydrogen transportation fuel in Croatia: Road map strategy. = Hydrogen transportation fuel in Croatia: Road map strategy. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Đukić, Ankica (2014) Autonomous hydrogen production system. = Autonomous hydrogen production system. In: International Conference on Clean Energy, 8-12.6.2014., Istanbul, Turska.

Firak, Mihajlo and Đukić, Ankica (2013) Hydrogen Economy: State of the Art and Perspectives. = Hydrogen Economy: State of the Art and Perspectives. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.

Perković, Luka and Priesching, Peter and Bogensperger, Michael and Mikulčić, Hrvoje (2015) Large Eddy Simulation of Turbulent Premixed Combustion of Laboratory-Scaled Flames. = Large Eddy Simulation of Turbulent Premixed Combustion of Laboratory-Scaled Flames. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Škec, Stanko and Štorga, Mario and Tečec Ribarić, Zlatka and Marjanović, Dorian (2015) Work sampling approach for measuring intellectual capital elements in product development context. = Work sampling approach for measuring intellectual capital elements in product development context. In: International Conference on Engineering Design (ICED 2015), 27.-31.07.2015., Milan, Italija.

Bojčetić, Nenad and Salopek, Damir and Marjanović, Dorian (2015) PLM implementation: case study. = PLM implementation: case study. In: 20th International Conference on Engineering Design (ICED 2015), 07.2015, Milano, Italija.

Midžić, Ida and Štorga, Mario and Marjanović, Dorian (2015) Eco-evaluation of Technical Systems in the Conceptual Phase. = Eco-evaluation of Technical Systems in the Conceptual Phase. In: International Conference on Engineering Design (ICED15), 27.-30.07.2015., Milano, Italija.

Osman, Krešimir and Štorga, Mario and Marjanović, Dorian (2015) An Algorithm for Behaviour Prediction of Complex Technical Systems. = An Algorithm for Behaviour Prediction of Complex Technical Systems. In: International Conference on Engineering Design (ICED 2015), 27.- 30.07.2015., Milano, Italija.

Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2015) A model of idea evaluation and selection for product innovation. = A model of idea evaluation and selection for product innovation. In: International Conference on Engineering Design 2015 (ICED 2015), 27.-30.07.2015., Milano, Italy.

Midžić, Ida and Štorga, Mario and Marjanović, Dorian (2014) Using ecodesign guidelines for concept evaluation: Findings from an experiment. = Using ecodesign guidelines for concept evaluation: Findings from an experiment. In: 13th International Design Conference DESIGN 2014, 19-22.05.2014., Dubrovnik, Hrvatska.

Osman, Krešimir and Štorga, Mario and Marjanović, Dorian (2014) An Approach to Nonlinear Behaviour Prediction of Technical Systems. = An Approach to Nonlinear Behaviour Prediction of Technical Systems. In: 13th International Design Conference, DESIGN 2014, 19-22.05.2014., Dubrovnik, Croatia.

Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2014) Idea Capacity Assessment for Product Innovation. = Idea Capacity Assessment for Product Innovation. In: 13th International Design Conference DESIGN 2014, 19-22.05.2014., Dubrovnik, Hrvatska.

Škec, Stanko and Štorga, Mario and Rohde, Danijel and Marjanović, Dorian (2014) Tailoring risk management approach for the product development environment. = Tailoring risk management approach for the product development environment. In: DESIGN 2014 Conference, 19-22.05.2014., Dubrovnik, Croatia.

Midžić, Ida and Marjanović, Dorian (2013) Estimation of environmental effects in early product development. = Estimation of environmental effects in early product development. In: 5th International Congres of International Association of Societies of Design Research "Consilience and Innovation in Design", 26 - 30.08.2013., Tokyo, Japan.

Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2013) Idea relevancy assessment in preparation of product development. = Idea relevancy assessment in preparation of product development. In: 19th International Conference on Engineering Design (ICED13), 19-22.08.2013., Seoul, Republika Korea.

Škec, Stanko and Stanković, Tino and Cash, Phil and Rohde, Danijel and Marjanović, Dorian (2013) Pragmatic risk assessment approach for product development. = Pragmatic risk assessment approach for product development. In: 9th International Workshop on Integrated Product Development IPD'12, 5-7.09.2012, Magdeburg, Njemačka.

Škec, Stanko and Štorga, Mario and Marjanović, Dorian (2013) Mapping risk analysis methods on product development process. = Mapping risk analysis methods on product development process. In: 3rd International Conference on Integration of Design, Engineering and Management for Innovation, 4-6.9.2013., Porto, Portugal.

Osman, Krešimir and Marjanović, Dorian (2012) Matrix Based Approach in Assessing Optimum Robust Product Architectures. = Matrix Based Approach in Assessing Optimum Robust Product Architectures. In: 23. DfX-Symposium, 04-05.10.2012., Bamberg, Njemačka.

Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2012) Decision Support System for Idea Selection. = Decision Support System for Idea Selection. In: 12th International Design Conference DESIGN 2012, 21-24.05.2012., Dubrovnik-Cavtat, Hrvatska.

Osman, Krešimir and Štorga, Mario and Stanković, Tino and Marjanović, Dorian (2012) Behaviour Prediction Framework in System Architecture Development. = Behaviour Prediction Framework in System Architecture Development. In: 1st International Conference on Uncertainty in Mechanical Engineering (ICUME 2011), 14-15.11.2011., Darmstadt, Njemačka.

Midžić, Ida and Marjanović, Dorian (2011) Eco design and creativity issues. = Eco design and creativity issues. In: 4th World Conference on Design Research (IASDR2011), 31.10.-04.11.2011., Delft, Nizozemska.

Božić, Mladen and Vučetić, Ante and Ilinčić, Petar and Kozarac, Darko and Lulić, Zoran (2015) Research Testbed for HCCI Engine. = Research Testbed for HCCI Engine. In: The 25th JUMV International Automotive Conference “Science and Motor Vehicles 2015″, 14-15.04.2015, Beograd, Srbija.

Božić, Mladen and Vučetić, Ante and Ilinčić, Petar and Lulić, Zoran (2013) Monitoring and Regulation of Vehicle Brake Tester. = Monitoring and Regulation of Vehicle Brake Tester. In: XXIV International Automotive Conference “Science and Motor Vehicles 2013, 23.-24.04.2013, Beograd, Srbija.

Šagi, Goran and Lulić, Zoran and Stjepandić, Josip (2013) Multi-Objective Optimization of Low-Floor Minibus Suspension System Parameters. = Multi-Objective Optimization of Low-Floor Minibus Suspension System Parameters. In: 20th ISPE International Conference on Concurrent Engineering, 2-6.09.2013., Melbourne, Australija.

Vučetić, Ante and Božić, Mladen and Ilinčić, Petar and Lulić, Zoran (2013) Acquisition and Analysis of the Vehicle Data via the EOBD Interface - Determination of Engine Characteristics. = Acquisition and Analysis of the Vehicle Data via the EOBD Interface - Determination of Engine Characteristics. In: XXIV International Automotive Conference “Science and Motor Vehicles 2013”, 23.-24.04.2013, Beograd, Srbija.

Sjerić, Momir and Kozarac, Darko and Lulić, Zoran (2012) Stratified Fractal Combustion Model. = Stratified Fractal Combustion Model. In: Austrian-Croatian-Hungarian Combustion Meeting – ACH 2012, 12-13.04.2012, Zagreb, Croatia.

Tomić, Rudolf and Sjerić, Momir and Lulić, Zoran (2012) The optimization of crankshaft offset of spark ignition engine. = The optimization of crankshaft offset of spark ignition engine. In: 16th International Research/Expert Conference "Trends in Development of Machinery and Associated Technology", 10-12.09.2012., Dubai, Ujedinjeni Arapski Emirati (UAE).

Kozarac, Darko and Sjerić, Momir and Lulić, Zoran (2011) A numerical study of boundaries of the operating range of the HCCI combustion. = A numerical study of boundaries of the operating range of the HCCI combustion. In: 13th EAEC European Automotive Congress, The Automobile in the Second Decade: Sharing all Energy Solutions, 13-16.06.2011., Valencia, Španjolska.

Tomić, Rudolf and Lulić, Zoran and Ilinčić, Petar (2011) Optical Measuring Techniques in Reconstruction and Modification of Vehicles. = Optical Measuring Techniques in Reconstruction and Modification of Vehicles. In: XXIII JUMV International Automotive Conference "Science and motor vehicles 2011", 19 - 21. 04. 2011., Beograd, Srbija.

Hoić, Matija and Deur, Joško and Herold, Zvonko and Ivanović, Vladimir (2012) Modeling of dual dry clutch thermal dynamics. = Modeling of dual dry clutch thermal dynamics. In: 1st Biannual International Conference on Powertrain Modelling and Control (PMC2012), 04-06.09.2012., West Yorkshire, United Kingdom.

Sjerić, Momir and Kozarac, Darko and Tomić, Rudolf and Taritaš, Ivan and Blažić, Mislav Modelling the multi cylinder SI engine performance using cycle-simulation model. = Modelling the multi cylinder SI engine performance using cycle-simulation model. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2015, 27.09. - 2.10.2015., Dubrovnik, Hrvatska.

Vuilleumier, David and Taritaš, Ivan and Wolk, Benjamin and Kozarac, Darko and Saxena, Samveg and Dibble, Robert W. (2015) Multi-Level Computational Exploration of Advanced Combustion Engine Operating Strategies. = Multi-Level Computational Exploration of Advanced Combustion Engine Operating Strategies. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.09-02.10.2015., Dubrovnik, Republika Hrvatska.

Kozarac, Darko and Vuilleumier, David and Saxena, Samveg and Dibble, Robert (2013) Numerical Analysis of Influence of EGR on combustion of Biogas fuelled HCCI engines and the Possibility to Use EGR for reducing the High Intake Temperature Requirements. = Numerical Analysis of Influence of EGR on combustion of Biogas fuelled HCCI engines and the Possibility to Use EGR for reducing the High Intake Temperature Requirements. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27. 09. 2013., Dubrovnik, Hrvatska.

Kozarac, Darko and Schuemie, Henrik and Ofner, Herwig and Tatschl, Reinhard (2012) Modeling of Natural Gas Engine With The Emphasis on Prediction of Knock. = Modeling of Natural Gas Engine With The Emphasis on Prediction of Knock. In: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), 10-14. 9. 2012., Beč, Austrija.

Sjerić, Momir and Kozarac, Darko and Šagi, Goran (2011) Development of a Stratified Fractal Combustion Model. = Development of a Stratified Fractal Combustion Model. In: XXIII JUMV International Automotive Conference "Science and motor vehicles 2011", 19 - 21. 04. 2011., Beograd, Srbija.

Pavković, Neven and Martinec, Tomislav and Štorga, Mario (2014) Traceability – a factor of integration and a method to deal with complexity. = Traceability – a factor of integration and a method to deal with complexity. In: 10THinternational workshop on integrated design engineering IDE workshop, 10-12.09.2014., Gommern (Magdeburg), Njemačka.

Štorga, Mario and Škec, Stanko (2014) Intellectual Capital Performance Indicators for Complex Project Management. = Intellectual Capital Performance Indicators for Complex Project Management. In: International Conference on Advanced Design Research and Education ICADRE 14, 16-18.07.2014., Singapur, Singapur.

Cash, Philip and Stanković, Tino and Štorga, Mario (2013) An Analysis of Engineers Information Seeking Activity. = An Analysis of Engineers Information Seeking Activity. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE 2013, 04-07.08.2013., Portland, SAD.

Cash, Philip and Škec, Stanko and Štorga, Mario (2013) A bibliometric analysis of the DESIGN 2012 conference. = A bibliometric analysis of the DESIGN 2012 conference. In: ICED 2013, 19-22.08.2013., Seoul, Korea.

Peters, Christoph and Škec, Stanko and Leimeister, Jan Marco and Štorga, Mario (2013) Systems Engineering Meets Service Science - Extending the Scope for Holistic Design of Product-Service-Systems Using a Telemedicine Example. = Systems Engineering Meets Service Science - Extending the Scope for Holistic Design of Product-Service-Systems Using a Telemedicine Example. In: Tag des Systems Engineering, 06.-08.11.2013., Stuttgart, Njemačka.

Štorga, Mario and Stanković, Tino and Cash, Philip (2013) Visually Augmented Analysis of Socio-Technical Networks in Engineering Systems Design Research. = Visually Augmented Analysis of Socio-Technical Networks in Engineering Systems Design Research. In: International workshop on The Future of Transdisciplinary Design (TFTD13), 24-25 .06. 2013., Luksemburg, Luksemburg.

Štorga, Mario and Stanković, Tino and Pavković, Neven and Bojčetić, Nenad (2013) Application Framework for Traceability of Engineering Information. = Application Framework for Traceability of Engineering Information. In: 19th International Conference on Engineering Design ICED 13, 19-22.08.2013., Seoul, Korea.

Savšek, Tomaž and Štorga, Mario and Cerovšek, Mitja (2012) Information traceability in PLM environment - case study for automotive industry. = Information traceability in PLM environment - case study for automotive industry. In: Innovative Automotive Technology – IAT 2012, 12-13.04.2012., Novo mesto/Dolenjske Toplice, Slovenija.

Štorga, Mario and Bojčetić, Nenad and Pavković, Neven and Stanković, Tino (2011) Traceability of Engineering Information Development in PLM Framework. = Traceability of Engineering Information Development in PLM Framework. In: 8th PLM International Conference PLM11, 11-13.07.2011., Eindhoven, Nizozemska.

Štorga, Mario and Savšek, Tomaž Sledljivost informacijam v PLM okvirju. = Sledljivost informacijam v PLM okvirju. In: 3. Industrijski forum IRT 2011, 06-07.06.2011., Portorož, Slovenija.

Pavković, Neven and Martinec, Tomislav and Rohde, Danijel and Šikić, Bruno (2015) Management and Visualization of Relationships Between Engineering Objects. = Management and Visualization of Relationships Between Engineering Objects. In: International Conference on Engineering Design (ICED 2015), 27.-31.07.2015., Milan, Italija.

Martinec, Tomislav and Pavković, Neven (2014) Visualization of Information Traceability in Product Development. = Visualization of Information Traceability in Product Development. In: DESIGN 2014 Conference, 19-22.05.2014., Dubrovnik, Hrvatska.

Bosiljkov, Tomislav and Karlović, Sven and Semenski, Damir and Brnčić, Mladen and Tripalo, Branko and Ježek, Damir and Dujmić, Filip (2014) Implementation of Ultrasound and High Hydrostatic Pressures as Useful Mechanical Methods in Food Processing. = Implementation of Ultrasound and High Hydrostatic Pressures as Useful Mechanical Methods in Food Processing. In: 31st Danubia Adria Symposium on Advances in Experimental Mechanics, 24-27.09.2014., Kempten, Njemačka.

Božić, Željko and Semenski, Damir and Wolf, Hinko (2013) Fracture analysis of plates under lateral load pressure. = Fracture analysis of plates under lateral load pressure. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25-28. 09. 2013., Primošten, Croatia.

Semenski, Damir and Wolf, Hinko and Božić, Željko (2013) Advanced Methods of Structural Damage Analysis. = Advanced Methods of Structural Damage Analysis. In: Deformation and Fracture of Composites (DFC-12) & Structural Integrity and Multi-scale Modelling (SI-6), 07-11.04.2013., Cambridge.

Katić, Višnja and Leder Horina, Jasna and Semenski, Damir and Ježek, Damir and Špalj, Stjepan (2013) Mechanical Properties of Nickel-Titanium Orthodontic Wires with Various Coatings. = Mechanical Properties of Nickel-Titanium Orthodontic Wires with Various Coatings. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25-28.09.2013., Primošten, Hrvatska.

Wolf, Hinko and Semenski, Damir and Korošić, Saša (2013) Estimation of overhead transmission line aeolian vibrations. = Estimation of overhead transmission line aeolian vibrations. In: 30th DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, 25-25. 09. 2013., Primošten, Croatia.

Semenski, Damir and Brnčić, Mladen and Bosiljkov, Tomislav and Karlović, Sven and Ježek, Damir and Tripalo, Branko (2012) Ultrasonic processing and mechanical testing in food technology and biotechnology. = Ultrasonic processing and mechanical testing in food technology and biotechnology. In: 15th International Conference on Experimental Mechanics, 22-27.07.2012., Porto, Portugal.

Bakić, Ante and Semenski, Damir and Jecić, Stjepan (2010) Contact caustics measurements expanded to anisotropic materials. = Contact caustics measurements expanded to anisotropic materials. In: 27st Danubia-Adria Symposium on Advances in Experimental Mechanics, 22-25.09.2010., Wroclaw, Poljska.

Jurčević Lulić, Tanja and Bratić, Robert and Leder Horina, Jasna (2013) A method of loads assessment in the knee joint for ergonomic practice. = A method of loads assessment in the knee joint for ergonomic practice. In: 5th International Ergonomics Conference, 12-15.06.2013., Zadar, Hrvatska.

Sušić, Aleksandar and Špehar, Mateja and Jurčević Lulić, Tanja (2013) Procedure for Correction of Lifting Task Posture for Injury Prevention. = Procedure for Correction of Lifting Task Posture for Injury Prevention. In: 5th International Conference ERGONOMICS 2013, 12-15. 06. 2013., Zadar, Croatia.

Leder Horina, Jasna and Begić, Domagoj and Jurčević Lulić, Tanja (2012) Stress Analyses in Dental Biomechanics. = Stress Analyses in Dental Biomechanics. In: 16th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, 10-12.09.2012., Dubai, Ujedinjeni Arapski Emirati.

Leder Horina, Jasna and Jurčević Lulić, Tanja (2013) Pregled modela koštane pregradnje. = Review of bone remodelling models. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.

Pamuković, Frane and Golemović, Mirna and Novoselac, Jurjana and Golubić Čepulić, Branka and Zlopaša, Gordan and Kodvanj, Janoš (2015) Experimental Measurement of Mechanical Properties of Human Umbilical Vein. = Experimental Measurement of Mechanical Properties of Human Umbilical Vein. In: 24th Congress of the European Association of Tissue Banks, 1-3.10.2015., Split, Hrvatska.

Čukelj, Fabijan and Kodvanj, Janoš and Surjak, Martin (2013) Biomechanical analysis of proximal humeral fixation using locking plates. = Biomechanical analysis of proximal humeral fixation using locking plates. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25. – 28. 09. 2013., Primošten, Hrvatska.

Kodvanj, Janoš and Beer, Rudolf and Huber, Wolfgang (2013) Mechanical analysis of the weakness of cone – coupling used in modular assembled hip-prosthesis. = Mechanical analysis of the weakness of cone – coupling used in modular assembled hip-prosthesis. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25.–28. 09. 2013., Primošten, Hrvatska.

Tomičević, Zvonimir and Hild, François and Kodvanj, Janoš and Roux, Stéphane (2013) Validation of elastic and identification of plastic parameters of Johnson-Cook law using DIC. = Validation of elastic and identification of plastic parameters of Johnson-Cook law using DIC. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25.–28. 09. 2013., Primošten, Hrvatska.

Pamuković, Frane and Surjak, Martin and Kodvanj, Janoš (2012) Application of the Optical System Aramis for Determining the Stability of External Fixator. = Application of the Optical System Aramis for Determining the Stability of External Fixator. In: Danubia-Adria Symposium on Advances in Experimental Mechanics, 26-29.09.2012., Beograd, Srbija.

Tomičević, Zvonimir and Hild, François and Kodvanj, Janoš and Roux, Stéphane and Bakić, Ante (2012) Two Scale Full-Field Measurement on Spheroidal Graphite Cast Iron. = Two Scale Full-Field Measurement on Spheroidal Graphite Cast Iron. In: Danubia-Adria Symposium on Advances in Experimental Mechanics, 26-29.09.2012., Beograd, Srbija.

Kodvanj, Janoš and Sabalić, Srećko and Surjak, Martin and Pamuković, Frane (2013) Utjecaj opterećenja na biomehaničku stabilnost prijeloma distalnog humerusa. = Influence of loading on the biomechanical stability of distal humerus fractures. In: 5. susret hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.

Kodvanj, Janoš and Surjak, Martin and Ćurko, Daria (2013) Stabilnost osteosinteze pločicom kod prijeloma proksimalnog humerusa. = Stability of fixation of proximal humerus fracture using locking plate. In: 5. susret hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.

Tomičević, Zvonimir and Pamuković, Frane and Surjak, Martin and Kodvanj, Janoš (2013) Primjena regularizacije na korelaciju digitalne slike. = Primjena regularizacije na korelaciju digitalne slike. In: 5. susret hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2015) On the Optimization of Shape Parameters in the Local Radial Point Interpolation Collocation Method for Modeling of Heterogeneous Materials. = On the Optimization of Shape Parameters in the Local Radial Point Interpolation Collocation Method for Modeling of Heterogeneous Materials. In: 8th International Congress of Croatian Society of Mechanics, 29.9.-2.10.2015., Opatija, Hrvatska.

Virag, Lana and Vindiš, Vedran and Sorić, Jurica and Karšaj, Igor (2015) Implementation of Thrombus-laden Abdominal Aortic Aneurysms into Finite Element Code. = Implementation of Thrombus-laden Abdominal Aortic Aneurysms into Finite Element Code. In: 8th International Congress of Croatian Society of Mechanics, 29.09.-02.10.2015., Opatija, Hrvatska.

Jarak, Tomislav and Hoster, Josip and Jalušić, Boris and Sorić, Jurica (2012) Numerical analysis of 2-D linear elastic problems by MLPG method. = Numerical analysis of 2-D linear elastic problems by MLPG method. In: International Congress of Croatian Society of Mechanics (7 ; 2012), 22.-25.05.2012., Zadar, Hrvatska.

Karšaj, Igor and Virag, Lana and Sorić, Jurica and Humphrey, Jay D. (2012) Application of 3-D G&R Model to Abdominal Aorta. = Application of 3-D G&R Model to Abdominal Aorta. In: 7th International Congress of Croatian Society of Mechanics, 22-25.5.2012., Zadar, Hrvatska.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2014) Bezmrežna numerička kolokacijska metoda za modeliranje heterogenih materijala. = Meshless collocation method for modeling of heterogeneous materials. In: Šesti susret Hrvatskog društva za mehaniku, 29.-30.5.2014., Rijeka, Hrvatska.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2013) O bezmrežnom modeliranju heterogenih materijala. = On meshless modeling of heterogeneous materials. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.

Jarak, Tomislav and Hoster, Josip and Sorić, Jurica (2011) Rubni uvjeti sila u bezmrežnoj mješovitoj kolokacijskoj formulaciji. = Force boundary conditions in a meshless mixed collocation formulation. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011, Slavonski Brod, Hrvatska.

Holik, Mario Janković and Galović, Antun (2013) Teorijska analiza optimalnog režima rada Braytonova ciklusa. = Theoretical analysis of the optimal operation mode of Brayton cycle. In: 11th Natural gas, Heat and Water Conference/ 4th International Gas, Heat and Water Conference, 25-27.09.2013., Osijek, Hrvatska.

Holik, Mario and Živić, Marija and Galović, Antun (2013) Thermographic quantitative analysis of temperature field around the moving heat source. = Thermographic quantitative analysis of temperature field around the moving heat source. In: Interklima 2013, 11.4.2013., Zagreb, Hrvatska.

Živić, Marija and Galović, Antun and Končić, Ružica (2013) Detailed analysis of the effect of the turbine and compressor isentropic efficiency on the thermal efficiency and the total entropy change of Brayton cycle. = Detailed analysis of the effect of the turbine and compressor isentropic efficiency on the thermal efficiency and the total entropy change of Brayton cycle. In: 8th Conference on sustainable development of energy, water and environment system, 22-27.09.2013., Dubrovnik, Hrvatska.

Galović, Antun and Živić, Marija and Zmaić, Željko and Holik, Mario (2012) Application of the lumped capacitance method for the cooling of vertical plate immersed in water. = Application of the lumped capacitance method for the cooling of vertical plate immersed in water. In: 7th International Congress of Croatian Society of Mechanics, 22-25. 05. 2012, Zadar, Hrvatska.

Holik, Mario and Janković, Zvonimir and Končić, Ružica and Živić, Marija and Galović, Antun (2012) Numerička i termografska analiza oštećenosti izolacije toplovoda. = In: 10th Natural Gas, Heat and Water Conference/ 3rd International Natural Gas, Heat and Water Conference, 26-28.09.2012., Osijek, Hrvatska.

Končić, Ružica and Kokanović, Mato and Galović, Antun (2012) Comparison of the parallel and counter flow heat exchanger - thermal analysis. = Comparison of the parallel and counter flow heat exchanger - thermal analysis. In: 4th International Scientific and Expert Conference TEAM 2012, 17-19. 09. 2012., Slavonski Brod, Hrvatska.

Galović, Antun and Živić, Marija and Holik, Mario (2011) Analiza određivanja ogrjevnih vrijednosti goriva pri potpunom izgaranju parafinskih ugljikovodika. = Determination Analysis of Heating Values by Complete Combustion of Hydrocarbons. In: 9. Skup o prirodnom plinu, toplini i vodi / 2.Međunarodni skup o prirodnom plinu, toplini i vodi, 28.- 30. 9. 2011, Osijek, Hrvatska.

Barle, Jani and Wolf, Hinko and Đukić, Predrag (2013) Experimental verification of the dynamic model for a wind turbine tower. = Experimental verification of the dynamic model for a wind turbine tower. In: Danubia-Adria, 09. - 28. 09. 2013., Primošten, R. Hrvatska.

Božić, Željko and Schmauder, Siegfried and Wolf, Hinko (2013) The Influence of Residual Stresses on Fatigue Crack Growth Rate in Stiffened Panels. = The Influence of Residual Stresses on Fatigue Crack Growth Rate in Stiffened Panels. In: 2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, 11-14. 06. 2013., Dubrovnik-Cavtat, Croatia.

Alujević, Neven and Wolf, Hinko and Domazet, Željko (2012) Auto-adaptive velocity feedback for active isolation of random vibrations in subcritical 2 dof systems. = Auto-adaptive velocity feedback for active isolation of random vibrations in subcritical 2 dof systems. In: International Conference on Noise and Vibration Engineering, 17.-19.2012., Leuven, Belgija.

Sušić, Aleksandar and Žokalj, Martina and Kasović, Mario (2013) Estimation of Lumbar Spine Load During Lifting Task Execution. = Estimation of Lumbar Spine Load During Lifting Task Execution. In: 5th International Conference ERGONOMICS 2013, 12-15. 06. 2013., Zadar, Croatia.

Virag, Lana and Karšaj, Igor and Humphrey, Jay D. (2012) Interaction of Intraluminal Thrombus and Aortic Wall - 3-D Numerical Model. = Interaction of Intraluminal Thrombus and Aortic Wall - 3-D Numerical Model. In: 8th European Solid Mechanics Conference, 9-13.7.2012., Graz, Austrija.

Vindiš, Vedran and Virag, Lana and Karšaj, Igor (2014) Implementacija numeričkog modela rasta aneurizme abdominalne aorte u paket za konačne elemente. = The implementation of numerical model of abdominal aortic aneurysm growth in finite element analysis program. In: Šesti susret Hrvatskog društva za mehaniku, 29.-30.05.2014., Rijeka, Hrvatska.

Virag, Lana and Vindiš, Vedran and Wilson, John S. and Karšaj, Igor and Humphrey, Jay D. (2014) Model rasta i restrukturiranja aneurizme abdominalne aorte. = Growth and remodeling model of abdominal aortic aneurysm. In: Šesti skup Hrvatskog društva za mehaniku, 29.-30.05.2014., Rijeka, Hrvatska.

Vindiš, Vedran and Virag, Lana and Karšaj, Igor (2013) Numerički model ponašanja intraluminalnog tromba kod aneurizme abdominale aorte pri dvoosnom opterećenju. = Numerical model of intraluminal thrombus at abdominal aortic aneurysm subjected to biaxial loading. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.

Virag, Lana and Wilson, John S. and Karšaj, Igor and Humphrey, Jay D. (2013) Međudjelovanje intraluminalnog tromba i aneurizmatične stijenke aorte. = Interaction between intraluminal thrombus and aneurysmatic aortic wall. In: 5. susret Hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.

Žakula, Tea and Balen, Igor and Šimić, Ivan (2014) Hybrid cooling of a container for telecommunication equipment. = Hybrid cooling of a container for telecommunication equipment. In: 45th International Congress on Heating, Refrigeration and Air-Conditioning - KGH, 03.-05.12.2014, Beograd, Srbija.

Ćutić, Tomislav and Baleta, Jakov and Padovan, Maksimilijan and Smoljan, Darko and Balen, Igor (2012) Analysis of annual energy demand for ventilation using a model based on hourly measured weather data. = Analysis of annual energy demand for ventilation using a model based on hourly measured weather data. In: 43. Međunarodni kongres o grejanju, hlađenju i klimatizaciji, 5-7.12.2012, Beograd, Srbija.

Ćurko, Ante and Jurić, Ivan and Balen, Igor (2011) Modelling of the Heat Pump Operation in Typical Croatian Climatic Conditions. = Modelling of the Heat Pump Operation in Typical Croatian Climatic Conditions. In: VI. Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011, Dubrovnik, Hrvatska.

Družinec, Mirna and Balen, Igor (2013) Energetska analiza sustava grijanja Nacionalne i sveučilišne knjižnice. = Energy analysis of heating system of National and university library. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji Interklima 2013, 11.04.2013, Zagreb, Hrvatska.

Smoljan, Darko and Balen, Igor (2013) Experimental investigation of a turbulent jet from two opposed radial ceiling diffusers. = Experimental investigation of a turbulent jet from two opposed radial ceiling diffusers. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji, 11.04.2013, Zagreb, Hrvatska.

Ćatipović, Ivan and Degiuli, Nastia and Werner, Andreja and Čorić, Većeslav and Radanović, Jadranka (2014) Approximation of Towline Influence on Towed Ship Motions. = Approximation of Towline Influence on Towed Ship Motions. In: 2nd International Conference on Maritime Technology and Engineering, MARTECH 2014, 15.-17.10.2014., Lisbon, Portugal.

Bužančić Primorac, Branka and Parunov, Joško (2015) Statistics of still water bending moment of damaged ship. = Statistics of still water bending moment of damaged ship. In: 5th International Conference on Marine Structures, Southampton, Engleska.

Bužančić Primorac, Branka and Parunov, Joško (2015) Structural reliability assessment of accidentally damaged oil tanker. = Structural reliability assessment of accidentally damaged oil tanker. In: 16th International Congress of the International Maritime Association of the Mediterranean, 21-24.09.2015., Pula, Hrvatska.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2015) Influence of the required EEDI reduction factor application on general cargo ships GHG emissions. = Influence of the required EEDI reduction factor application on general cargo ships GHG emissions. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015, 21-24.09.2015., Pula, Hrvatska.

Bužančić Primorac, Branka and Slapničar, Vedran and Munić, Ivan and Grubišić, Vjekoslav and Ćorak, Maro and Parunov, Joško (2015) Statistics of still water bending moment of damaged Suezmax oil tanker. = Statistics of still water bending moment of damaged Suezmax oil tanker. In: 18th International Conference on Ships and Shipping Research, 24-26.06.2015., Lecco, Italija.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2015) Modification of the EEDI for Ro-Ro passenger ships. = Modification of the EEDI for Ro-Ro passenger ships. In: the World Maritime Technology Conference 2015 (SNAME Maritime Convention), 03-07.11.2015., Providence, Rhode Island, USA.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola and Klisarić, Vedran (2014) Influence of new power sources on the attained EEDI. = Influence of new power sources on the attained EEDI. In: International Conference on Influence of EEDI on Ship Design, 24-25.09.2014., London, UK.

Vladimir, Nikola and Šestan, Ante and Ančić, Ivica and Prosinečki, Tomislav (2014) Strength assessment of two-stroke marine diesel engine piston rings in the mounting procedure. = Strength assessment of two-stroke marine diesel engine piston rings in the mounting procedure. In: Twelfth International Conference on Marine Sciences and Technologies - Black Sea 2014, 25-27.09.2014., Varna, Bugarska.

Gledić, Ivana and Parunov, Joško (2015) Application of weight function method in the assessment of crack propagation through stiffened panel. = Application of weight function method in the assessment of crack propagation through stiffened panel. In: International Congress of the International Maritime Association of the Mediterranean "Towards Green Marine Technology and Transport" (16 ; 2015), 21.-24.09.2015., Pula, Hrvatska.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2013) EEDI calculation for passenger and Ro-Ro passenger ships. = EEDI calculation for passenger and Ro-Ro passenger ships. In: International Conference on Design & Operation of Passenger Ships, 20-21.11.2013., London, Velika Britanija.

Runko Luttenberger, Lidija and Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2013) Integrated power systems in small passenger ships. = Integrated power systems in small passenger ships. In: PlugBoat 2013, 10-11.10.2013., Nica, Francuska.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2012) EEDI as a design criterion for RO-PAX ships power plant - current status and future challenges. = EEDI as a design criterion for RO-PAX ships power plant - current status and future challenges. In: International Conference on Marine Sciences and Technologies - Black Sea (11 ; 2012), 04.-06.10.2012., Varna, Bugarska.

Jurišić, Paul and Parunov, Joško (2015) Influence of corrosion-related degradation of mechanical properties of shipbuilding steel on collapse strength of plates and stiffened panels. = Influence of corrosion-related degradation of mechanical properties of shipbuilding steel on collapse strength of plates and stiffened panels. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015, 21-24.09. 2015., Pula, Hrvatska.

Katalinić, Marko and Ćorak, Maro and Parunov, Joško (2015) Analysis of wave heights and wind speeds in the Adriatic Sea. = Analysis of wave heights and wind speeds in the Adriatic Sea. In: Maritime Technology and Engineering, 05-07.10.2014., Lisbon, Portugal.

Parunov, Joško and Ćorak, Maro (2015) Design charts for quick estimation of wave loads on damaged oil tanker in the Adriatic Sea. = Design charts for quick estimation of wave loads on damaged oil tanker in the Adriatic Sea. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015 - Towards Green Marine Technology and Transport, 21.-24.9.2015., Pula, Hrvatska.

Parunov, Joško and Ćorak, Maro and Gledić, Ivana (2015) Comparison of two practical methods for seakeeping assessment of damaged ships. = Comparison of two practical methods for seakeeping assessment of damaged ships. In: 5th International Conference on Marine Structures (MARSTRUCT), 25.-27.03.2015., Southampton, UK.

Ćorak, Maro and Parunov, Joško and Guedes Soares, Carlos (2014) Short-term probabilistic combination of wave and whipping bending moments. = Short-term probabilistic combination of wave and whipping bending moments. In: 2nd International Conference on Maritime Technology and Engineering MARTECH 2014, 15-17.10.2014., Lisabon, Portugal.

Parunov, Joško and Ćorak, Maro (2013) Structural reliability of ULCS - the concept. = Structural reliability of ULCS - the concept. In: 2nd Internatonal Workshop on springing and whipping of ships, 08-10.11.2012., Split, Hrvatska.

Burić, Zrinka and Bužančić Primorac, Branka and Parunov, Joško (2012) Residual strength of damaged oil tanker in the Adriatic Sea. = Residual strength of damaged oil tanker in the Adriatic Sea. In: 17th International Conference on Ship and Shipping Research, 28-30.03.2011., Napulj, Italija.

Prpić-Oršić, Jasna and Faltinsen, Odd Magnus and Parunov, Joško (2015) The effect of voluntary speed reduction criteria on attainable ship speed. = The effect of voluntary speed reduction criteria on attainable ship speed. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015 - Towards Green Marine Technology and Transport, 21.-24.09.2015., Pula, Hrvatska.

Senjanović, Ivo and Čorić, Većeslav and Vladimir, Nikola (2012) Razvoj i dostignuća hrvatske brodogradnje - brodovi i pomorske konstrukcije. = Development and achievements of the Croatian shipbuilding - ships and offshore structures. In: IV Savjetovanje o morskoj tehnologiji in memoriam akademiku Zlatku Winkleru, 25-26.11.2011., Rijeka, Hrvatska.

Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Vladimir, Nikola and Choi, Tae Muk (2015) Application of the assumed mode method to the vibration analysis of rectangular plate structures in contact with fluid. = Application of the assumed mode method to the vibration analysis of rectangular plate structures in contact with fluid. In: 7th International Conference on Hydroelasticity in Marine Technology, 16-19.09.2015., Split, Hrvatska.

Im, Hong-Il and Vladimir, Nikola and Malenica, Šime and Ryu, Hong Ryeul and Cho, Dae Seung (2015) Fatigue analysis of HHI SkyBench™ 19000 TEU ultra large container ship with springing effect included. = Fatigue analysis of HHI SkyBench™ 19000 TEU ultra large container ship with springing effect included. In: 7th International Conference on Hydroelasticity in Marine Technology, Split, Hrvatska.

Malenica, Šime and Vladimir, Nikola and Choi, Young Myung and Senjanović, Ivo and Kwon, Sun Hong (2015) Global hydroelastic model for liquid cargo ships. = Global hydroelastic model for liquid cargo ships. In: 7th International Conference on Hydroelasticity in Marine Technology, 16-19.09.2015., Split, Hrvatska.

Senjanović, Ivo and Tomić, Marko and Vladimir, Nikola (2015) An advanced procedure for hydroelastic analysis of very large floating airport exposed to airplane load. = An advanced procedure for hydroelastic analysis of very large floating airport exposed to airplane load. In: 7th International Conference on Hydroelasticity in Marine Technology, 16-19.09.2015., Split, Hrvatska.

Ljulj, Andrija and Slapničar, Vedran (2012) Višekriterijski konceptualni projektni model ratnog broda. = Multicriterial conceptual design model of naval ship. In: Simpozij Teorija i praksa brodogradnje SORTA 2012, 27.-29.9.2012., Zagreb, Hrvatska.

Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung and Jokić, Marko and Choi, Tae Muk (2015) Comparative analysis of new shear locking-free finite element with other commonly used approaches in vibration analysis of Mindlin plates. = Comparative analysis of new shear locking-free finite element with other commonly used approaches in vibration analysis of Mindlin plates. In: 1st Pan-American Congress on Computational Mechanics – PANACM 2015, XI Argentine Congress on Computational Mechanics – MECOM 2015, 27-29.04.2015., Buenos Aires, Argentina.

Im, Hong-Il and Malenica, Šime and Vladimir, Nikola and Choi, Byung-Ki and Jung, Byoung-Hoon and Cho, Dae Seung (2014) Hydroelastic vibratory response of ultra large container ships. = Hydroelastic vibratory response of ultra large container ships. In: The Annual Autumn Conference The Society of Naval Architects of Korea, 06-07.11.2014., Changwon, Južna Koreja.

Malenica, Šime and Choi, Young Myung and Vladimir, Nikola and Kwon, Sun Hong and Chen, Xiao Bo (2014) Wave induced hydroelastic behavior of the vertical circular cylinder with liquid filled tank at the top. = Wave induced hydroelastic behavior of the vertical circular cylinder with liquid filled tank at the top. In: International Workshop on Water Waves and Floating Bodies (IWWWFB), 30.03.-02.04.2014., Osaka, Japan.

Senjanović, Ivo and Hadžić, Neven and Tomić, Marko and Vladimir, Nikola and Cho, Dae Seung (2014) Analytical and numerical methods for vibration analysis of thick rectangular plates by modified Mindlin theory. = Analytical and numerical methods for vibration analysis of thick rectangular plates by modified Mindlin theory. In: 10th International Conference on Computational Methods in Sciences and Engineering (ICCMSE 2014), 4.-7.04.2014., Atena, Grčka.

Senjanović, Ivo and Tomić, Marko and Vladimir, Nikola and Hadžić, Neven and Malenica, Šime (2014) Hydroelasticity of very large container ships analysed by coupling of 1D structural model and 3D hydrodynamic model. = Hydroelasticity of very large container ships analysed by coupling of 1D structural model and 3D hydrodynamic model. In: Design & Operation of Container Ships, 21-22.05.2014., London, Velika Britanija.

Senjanović, Ivo and Hadžić, Neven and Vladimir, Nikola (2012) Improved methodology of ship hydroelastic analysis. = Improved methodology of ship hydroelastic analysis. In: 6th International Conference on Hydroelasticity in Marine Technology, 19-21.09.2012., Tokyo, Japan.

Žanić, Vedran and Andrić, Jerolim and Prebeg, Pero and Pirić, Karlo and Radić, Lukša (2015) Design Support System application to structural design of mega-yacht. = Design Support System application to structural design of mega-yacht. In: 16th International Maritime Association of the Mediterranean Congress, 21-24.09.2015., Pula, Hrvatska.

Žanić, Vedran and Prebeg, Pero and Andrić, Jerolim (2013) Method for structural concept design of "open" ships. = Method for structural concept design of "open" ships. In: 12th International Symposium Practical Design of Ships and Other Floating Structures, PRADS 2013, 20-25.10.2013., Changwon, Korea.

Senjanović, Ivo and Vladimir, Nikola and Malenica, Šime and Cho, Dae Seung and Kwon, Sun Hong and Choi, Young Myung (2014) Advanced studies on the hydroelasticity of ships and offshore structures within project GCRC-SOP Korea. = Advanced studies on the hydroelasticity of ships and offshore structures within project GCRC-SOP Korea. In: V. Savjetovanje o morskoj tehnologiji in memoriam akademiku Zlatku Winkleru, 22-23.11.2013., Rijeka, Hrvatska.

Prebeg, Pero and Žanić, Vedran and Važić, Božo (2012) An application of a complex system optimization techniques to the ship structural design. = An application of a complex system optimization techniques to the ship structural design. In: International Marine Design Conference - IMDC, 11-14. 06. 2012., Glasgow, Velika Britanija.

Ćosić, Željko and Vladimir, Nikola and Ćatipović, Ivan (2013) Numeričko modeliranje mehaničkih naprezanja aparata visokonaponskih rasklopnih postrojenja uslijed djelovanja potresa. = Numerical modeling of mechanical stresses of high voltage apparatus under earthquake induced loads. In: 11.savjetovanje HRO CIGRE, 10-13.11.2013., Cavtat, Hrvatska.

Senjanović, Ivo and Hadžić, Neven and Tomić, Marko and Vladimir, Nikola (2012) Krutost pritegnutih platformi. = Stiffness of tension leg platforms. In: IV Savjetovanje o morskoj tehnologiji in memoriam akademiku Zlatku Winkleru, 25-26.11.2011., Rijeka, Hrvatska.

Igrec, Bojan and Bosiljevac, Marko and Šipuš, Zvonimir and Babić, Dubravko and Rudan, Smiljko (2016) Fiber-optic vibration sensor for high-power electric machines realized using 3D printing technology. = Fiber-optic vibration sensor for high-power electric machines realized using 3D printing technology. In: Photonics West 2016 - Photonic Instrumentation Engineering III, 14-19.02.2016., San Francisco, SAD.

Igrec, Bojan and Bosiljevac, Marko and Rudan, Smiljko and Šipuš, Zvonimir and Babić, Dubravko (2015) Fiber-optic vibration sensor for high-power electric machines. = Fiber-optic vibration sensor for high-power electric machines. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2015), 25.-29. svibanj 2015., Opatija, Croatia.

Hadžić, Neven (2014) Suvremene konstrukcije i oprema za marikulturu. = Modern mariculture structures and equipment. In: Morska tehnologija (offshore technology) - perspektivno područje za Republiku Hrvatsku, Zagreb, Hrvatska.

Senjanović, Ivo and Hadžić, Neven (2014) Potencijali hrvatske brodogradnje. = Potentials of the Croatian shipbuilding industry. In: Razvojni potencijali hrvatskog gospodarstva, 16.10.2014., Zagreb, Hrvatska.

Senjanović, Ivo and Hadžić, Neven and Vladimir, Nikola and Tomić, Marko (2013) Restoring stiffness formulations and their influence on ship hydroelastic response. = Restoring stiffness formulations and their influence on ship hydroelastic response. In: IMAM 2013, 14-17.10.2013., A Coruna, Španjolska.

Senjanović, Ivo and Hadžić, Neven and Bigo, Fabien (2012) Comparative study of hydroelastic response of large container ships determined by different formulations of restoring stiffness in FEM technique. = Comparative study of hydroelastic response of large container ships determined by different formulations of restoring stiffness in FEM technique. In: International Workshop on Springing & Whipping of Ships (2 ; 2012), Split, Hrvatska.

Senjanović, Ivo and Hadžić, Neven and Tomić, Marko (2011) On the linear stiffness of tension leg platforms. = On the linear stiffness of tension leg platforms. In: International Maritime Association of the Mediterranean, 13-16.09.2011., Genova, Italija.

Senjanović, Ivo and Hadžić, Neven and Tomić, Marko and Malenica, Šime (2011) On consistency of actual restoring stiffness formulations in hydroelastic analysis of marine structures. = On consistency of actual restoring stiffness formulations in hydroelastic analysis of marine structures. In: 26th International Workshop on Water Waves and Floating Bodies, 17-20.04.2011., Atena, Grcka.

Martić, Ivana and Degiuli, Nastia and Ćatipović, Ivan (2015) Seakeeping characteristics of intact and damaged ship in the Adriatic Sea. = Seakeeping characteristics of intact and damaged ship in the Adriatic Sea. In: 16th International Congress of the International Maritime Association of the Mediterranean, IMAM 2015, 21-24.09.2015., Pula.

Degiuli, Nastia and Ćatipović, Ivan and Martić, Ivana and Werner, Andreja and Čorić, Većeslav (2014) Influence of added resistance in regular waves on ship fuel consumption. = Influence of added resistance in regular waves on ship fuel consumption. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems, 20- 27.09.2014., Venice-Istanbul.

Kitarović, Stanislav and Andrić, Jerolim and Pirić, Karlo (2015) Elastic shear buckling capacity of the longitudinally stiffened flat panels. = Elastic shear buckling capacity of the longitudinally stiffened flat panels. In: 5th International Conference on Marine Structures, 25.-27.03.2015., Southampton, UK.

Kitarović, Stanislav and Andrić, Jerolim and Pirić, Karlo and Bičak, Mateja (2015) Progressive collapse analysis of a bulk carrier using IACS prescribed and NLFEM derived load - end shortening curves. = Progressive collapse analysis of a bulk carrier using IACS prescribed and NLFEM derived load - end shortening curves. In: 16th International Maritime Association of the Mediterranean Congress, 21-24.09.2015., Pula, Hrvatska.

Ćosić, Predrag (2014) Machine Tools Selection Using AHP Method and Multiobjective Optimization. = Machine Tools Selection Using AHP Method and Multiobjective Optimization. In: 2nd International Scientific Conference COMETa2014, Conferenceon Mechanical Engineering Technology and Applications, 2.-5.12.2014., Istočno Sarajevo, Bih.

Ćosić, Predrag Estimation of production times as a part of decision support. = Estimation of production times as a part of decision support. In: 11th International Conference on Automation Technology, Doliou, Tajvan.

Trstenjak, Maja and Ćosić, Predrag (2015) Decision support for machine tools selection in process planning and equipment investment. = Decision support for machine tools selection in process planning and equipment investment. In: 25th International Conference on Flexible Automation and Intelligent Manufacturing, 23.-26. srpanj 2015., Wolverhampton, United Kingdom.

Trstenjak, Maja and Ćosić, Predrag (2015) New machines selection tools using analytic hierarchy process. = New machines selection tools using analytic hierarchy process. In: 7th International Scientific Conference Management of Technology - Step to Sustainable Production, MOTSP2015, 10-12 June 2015, Brela, Makarska, Croatia, 10.-12.06.2015., Brela, Makarska, Hrvatska.

Cerovšek, Katarina and Ćosić, Predrag (2014) Machine tools selection in process planning using the AHP method. = Machine tools selection in process planning using the AHP method. In: 6th International Scientific Conference Management of Technology - Step to Sustainable Production, 11.-13.0. 2014., Bol, Hrvatska.

Tošić, Marina and Ćosić, Predrag (2013) Development of a Decision Support System for Machine Selection. = Development of a Decision Support System for Machine Selection. In: 5th International Scientific Conference Management of Technology - Step top Sustainable Production MOTSP2013, 29.-31.05.2013., Novi Vinodolski, Hrvatska.

Cajner, Hrvoje and Šakić, Nikola and Ćosić, Predrag (2012) Definition of new criterion in design of experiments based on model precision. = Definition of new criterion in design of experiments based on model precision. In: Management of Technology Step to Sustainable Production MOTSP2012, 14.-16.06.2012., Zadar, Republika Hrvatska.

Ćosić, Predrag and Lisjak, Dragutin and Milčić, Diana (2012) Process and Production as a Part of Logistic Activities. = Process and Production as a Part of Logistic Activities. In: VII Scientific Conference International Mechanical Engineering, COMEC 2012, 5.-7.11.2012., Santa Maria Beach Resort, Kuba.

Ćosić, Predrag and Milčić, Diana and Pirović, Davor (2012) Synergy of Process and Production Planning by Discrete Simulation in Manufacturing. = Synergy of Process and Production Planning by Discrete Simulation in Manufacturing. In: FAIM 2012: Ferry Cruise Conference Helsinki-Stockholm-Helsinki, 10-13 June 2012, 10.-13.06.2012., Ferry : Helsinki, Stockholm, Finska, Švedska.

Tošić, Marina and Ćosić, Predrag (2012) Reverse method for determining cutting operations in axial turning. = Reverse method for determining cutting operations in axial turning. In: Management of Technology Step to Sustainable Production - MOTSP2012, 14.-16.06.2012., Zadar, Hrvatska.

Ćosić, Predrag and Lisjak, Dragutin and Antolić, Dražen (2011) Estimation of Production Time by Regression and Neural Networks. = Estimation of Production Time by Regression and Neural Networks. In: 3rdInternational Scientific Conference, Management of Technology - Step to Sustainable Production MOTSP2011, 8.-10. lipnja 2011., Bol, otok Brač, Hrvatska.

Ćosić, Predrag and Lisjak, Dragutin and Lati, Valentina (2011) Multiobjective Optimization - Possibility for Production Improvement. = Multiobjective Optimization - Possibility for Production Improvement. In: 34th International Conference on Production Engineering, Proceedings, Proizvodno mašinstvo, 28.-30.09. 2011., Niš, Srbija.

Gečevska, Valentina and Chiabert, Paolo and Čuš, Franc and Anišić, Zoran and Veža, Ivica and Ćosić, Predrag (2011) Education in product lifecycle management new innovative and competitive knowledge concept. = Education in product lifecycle management new innovative and competitive knowledge concept. In: 3rd International Scientific Conference Management of Technology – Step to Sustainable Production, 8.-10.06.2011., Bol, Hrvatska.

Lisjak, Dragutin and Ćosić, Predrag and Milčić, Diana (2011) Two approaches for estimation of production time: robust regression analysis and neural network. = Two approaches for estimation of production time: robust regression analysis and neural network. In: International Conference on Flexible Automation and Intelligent Manufacturing (21 ; 2011), 26.-29.06.2011., Taichung, Taiwan.

Pirović, Davor and Gudlin, Mihael and Ćosić, Predrag (2011) Implementation of Genetic Algorithm as the Part of Dicrete Simulation in Production Planning. = Implementation of Genetic Algorithm as the Part of Dicrete Simulation in Production Planning. In: 1st Regional Conference - Mechatronics in Practice and Education MECH - CONF 2011, 08-10.12.2011., Subotica.

Ćosić, Predrag and Lisjak, Dragutin and Milčić, Diana (2011) Process planning in developed knowledge database. = Process planning in developed knowledge database. In: 1st Regional Conference -Mechatronics in practice and Education MECH - CONF 2011, 08.-10.12.2011., Subotica, Srbija.

Cajner, Hrvoje and Đukić, Goran and Kovačec, Miroslav and Štefanić, Nedeljko (2015) The analysis of lean management indicators in Croatian companies. = The analysis of lean management indicators in Croatian companies. In: MOTSP 2015, 10.-12.06.2015., Brela, Hrvatska.

Cajner, Hrvoje and Mačković, Mario and Štefanić, Nedeljko and Grubešić, Nikola (2014) Characterization of the explosion of flammable gas in closed pipes using the design of experiments methodology. = Characterization of the explosion of flammable gas in closed pipes using the design of experiments methodology. In: 6th International Scientific Conference Management of Technology – Step to Sustainable Production, 11.-13. lipanj 2014., Bol, Island Brac, Croatia.

Štefanić, Nedeljko and Tošanović, Nataša and Hegedić, Miro (2012) Production processes mapping. = Production processes mapping. In: Management of Technology – Step to Sustainable Production MOTSP 2012, 14.-16. lipanj 2012., Zadar, Croatia.

Gečevska, Valentina and Štefanić, Nedeljko and Veža, Ivica and Čuš, Franc (2011) Sustainable and Innovative Business Processes through Lean PLM Approach. = Sustainable and Innovative Business Processes through Lean PLM Approach. In: Industrijski sistemi, 14.-16.09.2011., Novi Sad, Srbija.

Kovačec, Miroslav and Pilipović, Ana and Štefanić, Nedeljko (2011) Impact of glass cullet on the consumption of energy and environment in the production of glass packaging material. = Impact of glass cullet on the consumption of energy and environment in the production of glass packaging material. In: Proceedings of the 9th WSEAS International Conference on Environment, Ecosystems and Development - EED '11, 29.-31.12.2011., Montreux, Švicarska.

Kovačec, Miroslav and Tošanović, Nataša and Štefanić, Nedeljko (2011) Recycling of glass packaging in Republic of Croatia. = Recycling of glass packaging in Republic of Croatia. In: Proceedings of the 9th WSEAS International Conference on Environment, Ecosystems and Development - EED '11, 29.-31.12.2011., Montreux, Švicarska.

Veža, Ivica and Gjeldum, Nikola and Celent, Luka and Štefanić, Nedeljko (2010) Problems of Lean Production Implementation in the Croatian Enterprises. = Problems of Lean Production Implementation in the Croatian Enterprises. In: 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 26.-28.05.2010., Beč, Austrija.

Ćatipović, Ivan and Degiuli, Nastia and Čorić, Većeslav and Werner, Andreja and Slapničar, Vedran and Radanović, Jadranka (2014) Dinamika broda u teglju. = Dynamics of a ship in towage. In: 21. Simpozij Teorija i praksa brodogradnje (In memoriam prof. Leopold Sorta), SORTA 2014, 2. - 4. listopad 2014., Baška, otok Krk, Hrvatska.

Dubreta, Nikša and Miloš, Damir (2015) The Structure of Motivation for Mechanical Engineering Study at University of Zagreb. = The Structure of Motivation for Mechanical Engineering Study at University of Zagreb. In: 7th International Scientific and Expert Conference of the International TEAM Society, 15.-16.10.2015., Beograd, Republika Srbija.

Dubreta, Nikša (2012) Answers to Questions are not Written at the End of the Book: Non-technical Content of Engineering Education. = Answers to Questions are not Written at the End of the Book: Non-technical Content of Engineering Education. In: 6th International Conference of Technology, Education and Development, 05.-07.03.2012., Valencija, Španjolska.

Trbušić, Helena and Dubreta, Nikša (2011) Engineering Education and Social Responsibility: A Qualitative Study of Non-technical Electiveness. = Engineering Education and Social Responsibility: A Qualitative Study of Non-technical Electiveness. In: Management of Technology - Step to Sustainable Production, 8.-10.06.2011., Bol, Brač, Hrvatska.

Kunica, Zoran and Lisjak, Dragutin (2013) Mechatronics longa, vita brevis: a concept of handling automaton by transactional analysis and evolutionary computation. = Mechatronics longa, vita brevis: a concept of handling automaton by transactional analysis and evolutionary computation. In: The 2nd regional conference Mechatronics in Practice and Education - MECHEDU 2013, 05-06.12.2013., Subotica, Srbija.

Katičić, Ljiljana and Dulčić, Želimir and Lisjak, Dragutin (2015) Concept of physical asset management. = Concept of physical asset management. In: 11th International Conference Challenges of Europe:Growth, Competitiveness and Inequality, 27.-29.05.2015., Split-Hvar, Hrvatska.

Kolar, Davor and Lisjak, Dragutin and Tošić, Marina (2015) Application of data mining techniques in small-series job shop. = Application of data mining techniques in small-series job shop. In: 5th International Conference on Production Engineering and Management 2015, 01.-02.10.2015., Trieste, Italy.

Tošić, Marina and Lisjak, Dragutin and Kolar, Davor (2015) Impact of the key performance indicators on a maintenance process: A literature overview. = Impact of the key performance indicators on a maintenance process: A literature overview. In: 5th International Conference on Production Engineering and Management 2015, 01.-02.10.2015., Trieste, Italy.

Katičić, Ljiljana and Lisjak, Dragutin and Dulčić, Želimir (2014) Asset governance in Croatia. = Asset governance in Croatia. In: Euromaintenance 2014., 05.-08.05.2014., Helsinki, Finska.

Katičić, Ljiljana and Lisjak, Dragutin and Dulčić, Želimir (2014) Asset governance as strategy for physical asset. = Asset governance as strategy for physical asset. In: 7th International Conference of the School of Economics and Business Conference Proceedings, 13.-14.09.2014., Sarajevo, Bosna i Hercegovina.

Kolar, Davor and Lisjak, Dragutin and Đukić, Goran (2012) Cloud Computing as a Business Supply Chain Support – an Overview. = Cloud Computing as a Business Supply Chain Support – an Overview. In: 4th International Scientific Conference MOTSP 2012, 14.-16.06.2012., Zadar, Croatia.

Lisjak, Dragutin and Čala, Ivo and Alić, Kostešić (2012) The use of self organizing neural network for vibration unbalance assessment. = The use of self organizing neural network for vibration unbalance assessment. In: European Congress on Maintenance and Asset Management (21 ; 2012), 14.-16.05.2012., Beograd, Srbija.

Lisjak, Dragutin and Čala, Ivo and Alić, Kostešić and Brckan, Krešimir and Blažun, Goran (2012) Primjer uvođenja ključnih pokazatelja učinkovitosti. = An example of introduction of key performance indicators. In: Međunarodno savjetovanje Hrvatskog društva održavatelja, 04.-06.06.2012., Zagreb, Hrvatska.

Lisjak, Dragutin and Vuković, Danijel and Alić Kostešić, Vesna (2011) Metoda AHP kao alat za izbor opreme. = AHP method as a tool for equipment selection. In: Međunarodno savjetovanje Hrvatskog društva održavatelja (18 ; 2011), 23.-25.05.2010., Zagreb, Hrvatska.

Žiha, Kalman (2014) Plasticity and binding energy interactions. = Plasticity and binding energy interactions. In: Multi-scale Modeling and Plasticity Characterization of Advanced Materials, 3-8.01.2014., Freeport, Bahamas.

Đukić, Goran and Opetuk, Tihomir and Cajner, Hrvoje and Lerher, Tone and Jelić, Ana (2015) Routing of VNA man-up turret trucks and vertical order-pickers. = Routing of VNA man-up turret trucks and vertical order-pickers. In: XIII. International logistics & supply chain congress, 22.-23.10.2015., Izmir, Turska.

Gajšek, Brigita and Đukić, Goran and Opetuk, Tihomir (2015) Review of Ergonomic solutions to Protect From Injuries of Lower Back in Case of Forklifts Drivers. = Review of Ergonomic solutions to Protect From Injuries of Lower Back in Case of Forklifts Drivers. In: Management of Technology – Step to Sustainable, 10.-12.06.2015., Brela, Hrvatska.

Lerher, Tone and Potrć, Iztok and Kramberger, Tomaž and Rosi, Bojan and Đukić, Goran (2015) Lean and green @ intralogistic - case study: SBS/RS versus AS/RS. = Lean and green @ intralogistic - case study: SBS/RS versus AS/RS. In: XIII. INTERNATIONAL LOGISTICS & SUPPLY CHAIN CONGRESS 2015, 22.-23.10.2015., Izmir, Turska.

Opetuk, Tihomir and Đukić, Goran (2014) Toward to the research of the Green Supply Chain Management in Croatia. = Toward to the research of the Green Supply Chain Management in Croatia. In: The 11th International Conference on Logistics & Sustainable Transport 2014, 19.-21.06.2014., Celje, Slovenija.

Opetuk, Tihomir and Đukić, Goran (2013) Interrelations of the Green Supply Chain Management with LCA, PLM, PLCM, LCM – literature survey. = Interrelations of the Green Supply Chain Management with LCA, PLM, PLCM, LCM – literature survey. In: Management of Technology Step to Sustainable Production MOTSP 2013, 29.-31.05.2013., Novi Vinodolski, Croatia.

Opetuk, Tihomir and Đukić, Goran (2012) Sustainable packaging in life cycle assessment and green supply chain management. = Sustainable packaging in life cycle assessment and green supply chain management. In: The second international conference product and packaging: paths in progress - 2012, 21.-22.11.2012., Lodz, Poljska.

Kolar, Davor and Đukić, Goran (2011) Design of Order-Picking Systems with VLM-s. = Design of Order-Picking Systems with VLM-s. In: 3rd International Scientific Conference Management of Technology Step to Sustainable Production, 8.-10.06.2011., Bol (Brač), Hrvatska.

Opetuk, Tihomir and Česnik, Vedran and Žolo, Ivan and Đukić, Goran (2011) Route Planning for Urban Waste Collection: Problem Considerations on Case. = Route Planning for Urban Waste Collection: Problem Considerations on Case. In: 3rd Scientific Conference Management of Technology Step to Sustainable Production, 8.-10.06.2011., Bol (Brač), Hrvatska.

Taboršak, Dragutin and Jurum-Kipke, Jasna and Sumpor, Davor (2011) Ergonomska prosudba udjela ljudskog faktora na unutarnjim plovnim putovima. = Ergonomic Assessment of Share of Human Factor on Inland Waterways. In: 6th International Scientific Conference on Ports and Waterways POWA 2011 "Transport market: Intermodality & Liberalisation", 12.10.2011., Zagreb, Hrvatska.

Taboršak, Dragutin and Toš, Zdravko and Sumpor, Davor (2011) Utjecaj promjene udjela ljudskog faktora na sigurnost i pouzdanost odvijanja prometa. = Influence of Change of Human Factor Share on Traffic Flow Safety and Reliability. In: Proceedings of the 6th International Scientific Conference on Ports and Waterways POWA 2011 "Transport market: Intermodality & Liberalisation", 12.10.2011., Zagreb, Hrvatska.

Cajner, Franjo and Landek, Darko and Cajner, Hrvoje and Rafael, Hrvoje and Kovačić, Saša (2014) Characteristics of Warm Baths for the quenching of Tool Steels. = Characteristics of Warm Baths for the quenching of Tool Steels. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 09.-11.04.2014., Ljubljana, Slovenija.

Cajner, Franjo and Kovačić, Saša and Kumić, Ivan and Cajner, Hrvoje (2013) The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. = The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11.-14.06.2013., Zagreb, Hrvatska.

Rujnić-Sokele, Maja and Radić Boršić, Ivana and Barić, Gordana (2014) Water vapour permeability of biodegradable films. = Water vapour permeability of biodegradable films. In: Management of Technology Step to Sustainable production MOTSP 2014, Zagreb, Hrvatska.

Hegedić, Miro and Opetuk, Tihomir and Đukić, Goran and Drašković, Hrvoje (2016) Life cycle assessment of power transformer-case study. = Life cycle assessment of power transformer-case study. In: Management of Technology – Step to Sustainable Production 2016, 01.-03.06.2016., Poreč, Croatia.

Rujnić-Sokele, Maja and Barić, Gordana (2013) Polyethylene bags - from cradle to grave. = Polyethylene bags - from cradle to grave. In: 5th International Scientific Conference: Management of Technology – Step to Sustainable Production, Novi Vinodolski, Hrvatska.

Rujnić-Sokele, Maja and Barić, Gordana (2012) Understanding bioplastics. = Understanding bioplastics. In: 4th International Scientific Conference: Management of Technology – Step to Sustainable Production, Zagreb, Hrvatska.

Čatić, Igor and Barić, Gordana and Galić, Kata and Grancarić, Anamarija and Rogić, Ana and Rujnić- Sokele, Maja and Karavanić, Ivor (2011) The basic systematisation of macromolecular compounds. = The basic systematisation of macromolecular compounds. In: 8th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenija.

Barle, Jani and Franulović, Marina and Jurčević Lulić, Tanja and Kladarić, Ivica and Markučič, Damir and Radić, Gojmir (2014) Izrada kataloga znanja, vještina i kompetencija za studije strojarstva u Republici Hrvatskoj. = Development of catalogue of knowledge, skills and competences for mechanical engineering studies in Croatia. In: Međunarodna stručna konferencija ME4CataLOgue, 04-05.12.2014., Slavonski Brod, Hrvatska.

Mihaljević, Morana and Markučič, Damir (2016) Procjena mjerne nesigurnosti ultrazvučnoga mjerenja debljine stijenke. = Measurement uncertainty estimation of the ultrasonic wall thickness measurements. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.

Markučič, Damir and Katić, Marko (2015) Comparison of x-ray vision systems. = Comparison of x-ray vision systems. In: 15. International scientific conference on production engineering, 10-13.06.2015., Vodice, Hrvatska.

Rakvin, Marko and Markučič, Damir and Dragojević, Andreja (2014) Application of Computed Radiography (CR) for characterization of historical documents. = Application of Computed Radiography (CR) for characterization of historical documents. In: 11th European Conference on Non-Destructive Testing (ECNDT 2014), 06-11.10.2014., Prag, Češka.

Markučič, Damir and Rakvin, Marko (2012) Analysis of computed radiography scanning parameters in NDT applications. = Analysis of computed radiography scanning parameters in NDT applications. In: Eurojoin 8, 24-26.05.2012., Pula, Hrvatska.

Medić, Srđan and Runje, Biserka and Groš, Josip and Markučič, Damir (2013) Implementacija zahtjeva norme ISO/TS 29001:2010 u hrvatske proizvodne tvrtke. = Implementation of ISO/TS 29001:2010 requirements in Croatian production companies. In: 13.hrvatska konferencija o kvaliteti i 4.znanstveni skup hrvatskog društva za kvalitetu, 09–11.05.2013., Brijuni, Hrvatska.

Stepanić, Josip and Markučič, Damir (2016) Uspostavljanje sustava osposobljavanja operatera bespilotnih letjelica. = Establishing a system for training the operators of unmanned aerial vehicles. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.

Mihaljević, Morana and Šimunović, Vedran and Mudronja, Vedran (2016) Detectability analysis of computer radiography by means of computed tomography. = Detectability analysis of computer radiography by means of computed tomography. In: 6th Conference on Industrial Computed Tomography, 09-12.02.2016., Wels, Austria.

Baršić, Gorana and Mudronja, Vedran and Katić, Marko and Šimunović, Vedran (2015) Use of statistical tolerances. = Use of statistical tolerances. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015., Vodice, Croatia.

Šimunović, Vedran and Baršić, Gorana and Katić, Marko and Mudronja, Vedran (2015) Measurement of parallel thread gauges in HMI/FSB-LPMD. = Measurement of parallel thread gauges in HMI/FSB-LPMD. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015., Vodice, Croatia.

Katić, Marko and Šimunović, Vedran and Baršić, Gorana and Mudronja, Vedran (2015) Calibration of line scales at HMT/FSB-LMPD. = Calibration of line scales at HMT/FSB-LMPD. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015, Vodice, Croatia.

Mudronja, Vedran and Mahović, Sanjin and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2014) Example of statistical tolerances. = Example of statistical tolerances. In: MATRIB 2014. Materials, Wear, Recycling, 26-28.06.2014., Vela Luka, Hrvatska.

Mudronja, Vedran and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2014) Indeksi sposobnosti procesa i statističke tolerancije. = In: 14. Hrvatska konferencija o kvaliteti i 5. znanstveni skup Hrvatskog društva za kvalitetu, 15-17.05.2014., Baška, Otok Krk, Hrvatska.

Katić, Marko and Šimunović, Vedran and Baršić, Gorana and Mudronja, Vedran (2013) Realization of highest level of traceability for length measurements in Croatia. = Realization of highest level of traceability for length measurements in Croatia. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.

Mudronja, Vedran and Baršić, Gorana and Šimunović, Vedran and Katić, Marko (2013) Traceability for right angle in Croatian National Laboratory for Length. = Traceability for right angle in Croatian National Laboratory for Length. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.

Šimunović, Vedran and Baršić, Gorana and Katić, Marko and Mudronja, Vedran (2013) Roundness - harmonic analysis and digital filtration. = Roundness - harmonic analysis and digital filtration. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.

Mudronja, Vedran and Runje, Biserka and Katić, Marko and Šimunović, Vedran and Baršić, Gorana (2012) Discussion about Six Sigma statistical definition. = Discussion about Six Sigma statistical definition. In: International Conference Management of Technology MOTSP 2012, 14-16.07.2012., Zadar, Croatia.

Mudronja, Vedran (2012) Difference between long-term and short-term process capability. = Difference between long-term and short-term process capability. In: MATRIB 2012., 20-22.06.2012, Vela Luka, Croatia.

Katić, Marko and Šimunović, Vedran and Mudronja, Vedran (2011) Modification of Kosters Primary Gauge Block Interferometer. = Modification of Kosters Primary Gauge Block Interferometer. In: 13th International scientific conference on production engineering CIM2011, 16-18.06.2011., Biograd, Hrvatska.

Šimunović, Vedran and Ferdelji, Nenad and Katić, Marko and Mudronja, Vedran (2011) Calculation of pitch diameter of symetrical thread plug gauges. = Calculation of pitch diameter of symetrical thread plug gauges. In: 13th International Scientific Conference on Production Engineering CIM 2011, 16-18.06.2011., Biograd, Hrvatska.

Baršić, Gorana and Mudronja, Vedran (2015) Iskustva u akreditaciji Hrvatskog nacionalnog laboratorija za duljinu. = In: 15. Hrvatska konferencija o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.

Mudronja, Vedran and Runje, Biserka and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2015) Postignuća Hrvatskog nacionalnog laboratorija za duljinu. = In: 15. Hrvatska konferencija o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.

Mudronja, Vedran (2011) Kako tumačiti statističku definiciju metodologije "šest sigma"? = In: 11. Hrvatska konferencija o kvaliteti i 2. znanstveni skup Hrvatskog društva za kvalitetu, 12-14.05.2011., Vodice, Hrvatska.

Runje, Biserka and Horvatić Novak, Amalija and Stepanić, Josip (2016) Computed tomography in dimensional metrology and material analysis. = Computed tomography in dimensional metrology and material analysis. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.

Runje, Biserka (2014) Quality management in the field of corrosion protection coatings. = Quality management in the field of corrosion protection coatings. In: 21. Savjetovanje o zaštiti materijala i industrijskom finišu - KORMAT 2014, 10.04.2014., Zagreb.

Bilušić, Martin and Runje, Biserka (2016) Traceability assurance in optical 3D metrology. = Traceability assurance in optical 3D metrology. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.

Lokas, Lea and Runje, Biserka and Alar, Vesna (2016) Evaluation of measurement uncertainty in electrochemical test methods. = Evaluation of measurement uncertainty in electrochemical test methods. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.

Bošnjaković, Alen and Runje, Biserka and Bašić, Hazim and Softić, Almira (2015) The characteristics of quality management system in inspection bodies in accordance with the International Standard ISO/IEC 17020:2012. = The characteristics of quality management system in inspection bodies in accordance with the International Standard ISO/IEC 17020:2012. In: Quality 2015, 10-13.07.2015., Neum, Bosna i Hercegovina.

Horvatić Novak, Amalija and Runje, Biserka and Alar, Vesna and Degiuli, Nastia (2015) Computed tomography - a new method in the fields of dimensional metrology and material inspection. = Computed tomography - a new method in the fields of dimensional metrology and material inspection. In: International Conference, MATRIB 2015: Materials, Wear, Recycling In memoriam prof.dr.sc. Gojko Marić, 25-27.06.2015., Vela Luka, Hrvatska.

Runje, Biserka and Horvatić Novak, Amalija and Stepanić, Josip and Mihaljević, Morana (2015) Predložena revizija Vodiča za iskazivanje mjerne nesigurnosti. = Proposed revision of the Guide to the expression of uncertainty in measurement. In: 11th International Conference Laboratory Competence 2015, 21-24.10.2015., Zadar, Hrvatska.

Runje, Biserka and Alar, Vesna and Alar, Željko and Stojanović, Ivan and Marković, Marija (2014) The reproducibility of coating thickness measurement results. = The reproducibility of coating thickness measurement results. In: MATRIB 2014 MATERIALS, WEAR, RECYCLING, 26-28.06.2014., Vela Luka, Hrvatska.

Runje, Biserka and Baršić, Gorana and Katić, Marko and Šimunović, Vedran and Horvatić Novak, Amalija (2014) Statistics in metrology. = Statistics in metrology. In: 10th International Conference Laboratory Competence 2014, 15-18.10.2014., Šibenik, Hrvatska.

Ropuš, Ivana and Runje, Biserka and Baršić, Gorana (2013) Dimensional nanometrology. = Dimensional nanometrology. In: International conference MATRIB 2013, 27-29.06.2013., Vela Luka, Hrvatska.

Runje, Biserka and Marković, Marija and Alar, Vesna and Medić, Srđan (2012) Utjecaj hrapavosti površine na debljinu sloja premaza. = The influence of surface roughness on the coating thickness. In: International Conference MATRIB 2012., 20-22.06.2012., Vela Luka, Korčula, Hrvatska.

Runje, Biserka and Kranjec, Tomislav and Alar, Vesna and Medić, Srđan (2012) Validacija, iskazivanje i usporedba rezultata mjerenja debljine premaza. = Validation, expression and compatibility of coating thickness measurement results. In: 12. Hrvatska konferencija o kvaliteti i 3. znanstveni skup Hrvatskog društva za kvalitetu „Kvalitetom do uspješnog društva“ Kvaliteta za najbolji učinak, 09-12.05.2012., Brijuni, Hrvatska.

Baršić, Zdravko and Runje, Biserka and Baršić, Gorana and Belavić, Božidar and Kralj, Hrvoje (2011) Uloga statističkih metoda u ocjenjivanju sukladnosti proizvoda od čelika. = The role of statistical methods of steel products conformity assessment. In: 11. Hrvatska konferencija o kvaliteti i 2. znanstveni skup Hrvatskog društva za kvalitetu, 12-14.05.2011., Vodice, Hrvatska.

Runje, Biserka and Alar, Vesna and Grdenić, Ivan (2011) Analiza rezultata mjerenja debljine premaza sukladno normi ISO 5725. = Analysis of the coating thickness measurement results in accordance to the ISO 5725 norm. In: International Conference on Materials, Tribology, Recycling, 28.06.-01.07.2011., Vela Luka, Korčula, Hrvatska.

Runje, Biserka and Medić, Srđan (2011) Measurement uncertainty in process of line scales calibrating. = Measurement uncertainty in process of line scales calibrating. In: 22nd DAAAM World Symposium 2011, 23.26.11.2011., Beč, Austrija.

Runje, Biserka and Rakijašić, Sanja and Alar, Vesna and Baršić, Gorana (2011) Estimation of process capability with regards to the application of fire-resistance coating. = Estimation of process capability with regards to the application of fire-resistance coating. In: The Sixth International Working Conference Total Quality Management - Advanced and Intelligent Approaches, 06-10.06.2011., Beograd, Srbija.

Horvatić Novak, Amalija and Bošnjaković, Alen and Runje, Biserka (2015) Osiguranje sljedivosti kod primjene računalne tomografije u dimenzionalnom mjeriteljstvu. = In: 15. Hrvatska konferencije o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.

Katić, Marko and Baršić, Gorana and Mihaljević, Morana (2016) Comparison of results obtained using Coordinate Measuring Machine, Computed Radiography and Computed Tomography. = Comparison of results obtained using Coordinate Measuring Machine, Computed Radiography and Computed Tomography. In: Annual Meeting on Computed Tomography, 09-12.02.2016., Wels, Austria.

Gojo, Miroslav and Baršić, Gorana and Grekulović, Vesna and Rajčić-Vujasinović, Mirjana and Stanković, Velizar (2014) Nickel-Tio2 composite coatings-surface characterization. = Nickel-Tio2 composite coatings-surface characterization. In: MATRIB 2014, 26. - 28. 06. 2014., Vela Luka, Htvatska.

Runje, Biserka and Baršić, Gorana and Šimunović, Vedran and Medić, Srđan (2014) Osiguravanje kvalitete rezultata mjerenja kroz međulaboratorijske usporedbe. = Quality assurance of measurement results through interlaboratory comparisons. In: 14. Hrvatska konferencija o kvaliteti i 5. znanstveni skup Hrvatskog društva za kvalitetu, 15-17.05.2014., Baška, Otok Krk, Hrvatska.

Baršić, Gorana and Butković, Ivan and Šimunović, Vedran and Katić, Marko (2012) Analysis of dimensional characteristics of the ribs on steel bars for reinforcement of concrete. = Analysis of dimensional characteristics of the ribs on steel bars for reinforcement of concrete. In: 23rd International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Sustainability, 24-27.10.2012., Zadar, Hrvatska.

Katić, Marko and Šimunović, Vedran and Baršić, Gorana (2012) Development of a low-cost high accuracy Phase Shifting Gauge Block Interferometer. = Development of a low-cost high accuracy Phase Shifting Gauge Block Interferometer. In: 23rd DAAAM International Symposium on Intelligent Manufacturing and Automation: : Focus on Sustainability, 24-27.10.2012., Zadar, Hrvatska.

Baršić, Gorana and Šimunović, Vedran and Katić, Marko (2011) Ensuring measurement unity in the field of dimensional nanometrology. = Ensuring measurement unity in the field of dimensional nanometrology. In: 22nd DAAAM World Symposium 2011, 23.26.11.2011., Beč, Austrija.

Katić, Marko and Šimunović, Vedran and Baršić, Gorana (2011) Modification of a zeiss gauge block interferometer. = Modification of a zeiss gauge block interferometer. In: The 22nd DAAAM International World Symposium, 23-26.11.2011., Beč, Austrija.

Runje, Biserka and Mažar, Miroslav and Barišić, Gorana (2011) Statistical tolerancing using Monte Carlo simulation. = Statistical tolerancing using Monte Carlo simulation. In: 13th International Scientific Conference on Production Engineering CIM 2011, 16-18.06.2011., Biograd, Hrvatska.

Stepanić, Josip and Ćosić Lesičar, Jelena and Posavec, Marko (2015) Detecting irregular dynamics of autonomous robotic systems using information entropy. = Detecting irregular dynamics of autonomous robotic systems using information entropy. In: Mechedu - Mechatronics in Practice and Education, 14-15.05. 2015., Subotica, Srbija.

Kasać, Josip and Milić, Vladimir and Stepanić, Josip and Mester, Gyula (2014) A Computational Approach to Parameter Identification of Spatially Distributed Nonlinear Systems with Unknown Initial Conditions. = A Computational Approach to Parameter Identification of Spatially Distributed Nonlinear Systems with Unknown Initial Conditions. In: IEEE Symposium Series on Computational Intelligence, 9-12.12.2014., Orlando, SAD.

Stepanić, Josip and Mester, Gyula and Kasać, Josip (2013) Synthetic inertial navigation systems: Case study of determining direction. = Synthetic inertial navigation systems: Case study of determining direction. In: 57. konferencija ETRAN-a, 3-6.06.2013., Zlatibor, Srbija.

Pejić Bach, Mirjana and Stepanić, Josip and Strugar, Ivan (2012) Embedded Systems Development Practices: Croatian Perspective. = Embedded Systems Development Practices: Croatian Perspective. In: Znanje in poslovni izzivi globalizacije v letu 2012 = Knowledge and business challenge of globalisation in 2012, 15-16.11.2012., Celje, Slovenija.

Stevanović, Stojan and Kasać, Josip and Stepanić, Josip (2012) Robust tracking control of a quadrotor helicopter without velocity measurement. = Robust tracking control of a quadrotor helicopter without velocity measurement. In: 23rd International DAAAM Symposium on Intelligent Manufacturing and Automation - Focus on Sustainability, 21-28.10.2012., Zadar, Hrvatska.

Ćosić Lesičar, Jelena and Stepanić, Josip (2011) Case study in innovation diffusion: aircraft electrical system. = Case study in innovation diffusion: aircraft electrical system. In: Information society - IS 2011, 10-14.10.2011., Ljubljana, Slovenija.

Vučković, Krešimir and Galić, Ivica and Čular, Ivan (2016) A numerical model for estimation of spur gear tooth bending fatigue life. = A numerical model for estimation of spur gear tooth bending fatigue life. In: 16th International Conference on New Trends in Fatigue and Fracture NT2F16, 24-27.05.2016., Dubrovnik, Hrvatska.

Opalić, Milan and Galić, Ivica and Vučković, Krešimir (2011) Wall thickness influence on allowable pressure of cast steel globe valve body. = Wall thickness influence on allowable pressure of cast steel globe valve body. In: International Conference of Engineering Against Fracture, 22-24.06.2011., Mikonos, Grčka.

Vučković, Krešimir and Galić, Ivica and Čegec, Nikola (2013) Trajna dinamička čvrstoća korijena zuba zupčanika. = Spur gear tooth root fatigue strength. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.

Opalić, Milan and Vučković, Krešimir and Kljajin, Milan (2011) Effect of Web Arrangement on Thin - rim Gear Tooth Contact Stress. = Effect of Web Arrangement on Thin - rim Gear Tooth Contact Stress. In: 15th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2011, 22-24.06.2011., Prag, Češka.

Opalić, Milan and Vučković, Krešimir and Žeželj, Dragan (2011) Bending fatigue crack initiation life prediction in spur gear tooth root. = Bending fatigue crack initiation life prediction in spur gear tooth root. In: 2nd International Conference of Engineering Against Fracture (ICEAF II), 22-24.06.2011., Mikonos, Grčka.

Zubić, Alen and Bojčetić, Nenad and Žeželj, Dragan and Flegarić, Stjepan (2016) A tool for visualization of CAD model component relations using DSM. = A tool for visualization of CAD model component relations using DSM. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.

Opalić, Milan and Vučković, Krešimir and Žeželj, Dragan and Risović, Stjepan (2011) Prediction of thin - rim gears bending fatigue crack initiation life. = Prediction of thin - rim gears bending fatigue crack initiation life. In: The 7th International Scientific Conference - Research and Development of Mechanical Elements and Systems - IRMES 2011, 27-28.04.2011, Zlatibor, Srbija.

Opalić, Milan and Panić, Nenad and Vučković, Krešimir and Žeželj, Dragan and Pinjuh Čorić, Željka and Kljajin, Milan (2012) Uvjeti pritezanja prirubnica plinskih cijevi. = Gas Pipeline Flange Clamping Conditions. In: 10th Natural Gas, Heat and Water Conference/ 3rd International Natural Gas, Heat and Water Conference, 26-28.09.2012., Osijek, Hrvatska.

Štorga, Mario and Škec, Stanko and Martinec, Tomislav and Perišić, Marija Majda (2016) Monitoring, measurement and simulation of individual and teamwork performance in collaborative product development and design. = Monitoring, measurement and simulation of individual and teamwork performance in collaborative product development and design. In: Human Life Design (HLD) International Symposium JAIST 2016, 26-29.03.2016., Kanazawa, Japan.

Kondić, Živko and Kondić, Veljko and Kljajin, Milan and Opalić, Milan (2013) Environmental management systems in urban areas - process of ISO 14000 standards series implementation. = Environmental management systems in urban areas - process of ISO 14000 standards series implementation. In: 3rd International Conference "Ecology of Urban Areas 2013", 11.10.2013., Zrenjanin, Srbija.

El Badawi El Najjar, Rachad and Friedl, Michael and Martinec, Tomislav and Ouamer Ali, Mohamed-Islem and Partie, Marcel and Borg, Jonathan and Vajna, Sándor (2016) Distributed IPD Project-based Learning - a PhD Summer School Student's Perspective. = Distributed IPD Project-based Learning - a PhD Summer School Student's Perspective. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.

Opalić, Milan and Kljajin, Milan and Markulin Grgić, Branimir Marko (2012) Motherboards and other circuit boards in WEEE recycling process. = Motherboards and other circuit boards in WEEE recycling process. In: II International Conference "ECOLOGY OF URBAN AREAS 2012", 15.10.2012., Zrenjanin, Srbija.

Perišić, Marija Majda and Martinec, Tomislav and Štorga, Mario and Kanduč, Tadej (2016) Agent-based simulation framework to support management of teams performing development activities. = Agent-based simulation framework to support management of teams performing development activities. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.

Hornung, Krunoslav and Stojkov, Marinko and Hnatko, Emil and Kljajin, Milan and Opalić, Milan (2011) Ušteda prirodnog plina uporabom sunčeve energije. = Saving natural gas using solar energy. In: 2nd International Natural Gas , Heat and Water Conference., 28-30.9.2011., Osijek, Hrvatska.

Kljajin, Milan and Opalić, Milan and Hnatko, Emil and Stojkov, Marinko (2011) Importance of design for recycling electronic and electrical equipment. = Importance of design for recycling electronic and electrical equipment. In: I International Conference "ECOLOGY OF URBAN AREAS 2011", 30.09.2011, Zrenjanin, Srbija.

Snider, Chris and Škec, Stanko and Gopsill, James and Hicks, Ben (2016) Determining work focus, common language and issues in engineering projects through topic persistence. = Determining work focus, common language and issues in engineering projects through topic persistence. In: 14th International Design Conference (DESIGN 2016), 16.-19.06.2016., Dubrovnik, Hrvatska.

Škec, Stanko and Štorga, Mario and Antonić, Ivana (2016) Analysis of information behaviour in product development context. = Analysis of information behaviour in product development context. In: 14th International Design Conference (DESIGN 2016), 16.-19.06.2016., Dubrovnik, Hrvatska.

Štorga, Mario and Marjanović, Dorian and Škec, Stanko (2014) Rethinking Product Development Education Stream Within an E-Learning Environment. = Rethinking Product Development Education Stream Within an E-Learning Environment. In: European Distance and E-learning Network (EDEN) Annual Conference 2014, 10-13.06.2014., Zagreb, Hrvatska.

Deur, Joško and Škugor, Branimir and Cipek, Mihael (2014) Integration of electric vehicles into energy and transport systems. = Integration of electric vehicles into energy and transport systems. In: 34th Conference on Automation in Transportation, 05-09.11.2014., Dubrovnik.

Cipek, Mihael and Škugor, Branimir and Deur, Joško (2014) Comparative analysis of conventional and electric delivery vehicles based on realistic driving cycles. = Comparative analysis of conventional and electric delivery vehicles based on realistic driving cycles. In: European Electric Vehicle Congress EEVC-2014, 02-05.12.2014., Brussels, Belgija.

Cipek, Mihael and Čorić, Mirko and Škugor, Branimir and Kasać, Josip and Deur, Joško (2013) Dynamic programming-based optimization of control variables of an extended range electric vehicle. = Dynamic programming-based optimization of control variables of an extended range electric vehicle. In: SAE 2013 World Congress & Exhibition, 16-18.04.2013., Detroit, MI, United States.

Deur, Joško and Cipek, Mihael and Škugor, Branimir and Petrić, Joško (2012) Modeling and low-level control of range extended electric vehicle dynamics. = Modeling and low-level control of range extended electric vehicle dynamics. In: 1st Biannual International Conference on Powertrain Modelling and Control (PMC2012), 04-06.09.2012., West Yorkshire, United Kingdom.

Šuligoj, Filip and Jerbić, Bojan and Švaco, Marko and Šekoranja, Bojan and Mihalinec, Dominik and Vidaković, Josip (2015) Medical applicability of a low-cost industrial robot arm guided with an optical tracking system. = Medical applicability of a low-cost industrial robot arm guided with an optical tracking system. In: IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2015, 28.09-02.10.2015., Hamburg, Njemačka.

Jerbić, Bojan and Šuligoj, Filip and Švaco, Marko and Šekoranja, Bojan (2014) Robot assisted 3D point cloud object registration. = Robot assisted 3D point cloud object registration. In: 25th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2014, 26-29.11.2014., Beč, Austria.

Šuligoj, Filip and Šekoranja, Bojan and Švaco, Marko and Jerbić, Bojan (2014) Object tracking with a multiagent robot system and a stereo vision camera. = Object tracking with a multiagent robot system and a stereo vision camera. In: 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013, 23.-26.10.2013., Zadar, Hrvatska.

Švaco, Marko and Bašić, Denis and Šekoranja, Bojan and Jerbić, Bojan (2012) A capacitive sensor for human-robot interaction. = A capacitive sensor for human-robot interaction. In: 23rd DAAAM International Symposium on Intelligent Manufacturing and Automation: : Focus on Sustainability, 24-27.10.2012., Zadar, Hrvatska.

Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2012) Industrial robotic system with adaptive control. = Industrial robotic system with adaptive control. In: Complex Adaptive Systems 2012, 14-16.11.2012., Washington, SAD.

Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Service oriented robotic assembly architecture. = Service oriented robotic assembly architecture. In: 13th International Scientific Conference on Production Engineering, 16-18.06.2011., Biograd, Hrvatska.

Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Multiagent robotic collaborative framework. = Multiagent robotic collaborative framework. In: Annals of DAAAM for 2011 and 22nd International DAAAM Symposium "Intelligent Manufacturing and Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.

Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Cooperative robotic assembly system. = Cooperative robotic assembly system. In: International Conference on Intelligent Computing and Intelligent Systems, 18-20.11.2011., Guangzhou, Kina.

Deur, Joško and Čorić, Mirko and Kasać, Josip and Assadian, Francis and Hrovat, Davor (2014) Applications of computational optimal control to vehicle dynamics. = Applications of computational optimal control to vehicle dynamics. In: Optimization and Optimal Control in Automotive Systems: workshop organized by the Austrian Center of Competence in Mechatronics, ACCM 2013, 15.07.-16.07.2013., Linz, Austria.

Crneković, Mladen and Pavlic, Tomislav and Lukas, Marin (2015) Programming language for the eMIR mobile robot. = Programming language for the eMIR mobile robot. In: 15th International Scientific Conference on Production Engineering, 10-13.06.2015., Vodice, Hrvatska.

Ranogajec, Vanja and Deur, Joško (2016) Bond graph analysis and optimal control of hybrid dual clutch transmission shift process. = Bond graph analysis and optimal control of hybrid dual clutch transmission shift process. In: 3rd Biennial International Conference on Powertrain Modelling and Control (PMC2016), 07-09.09.2016., Loughborough, Ujedinjeno Kraljevstvo.

Pavlic, Tomislav and Lukas, Marin and Crneković, Mladen (2015) Design and control of robotic arm for educational mobile robot. = Design and control of robotic arm for educational mobile robot. In: 15th International Scientific Conference on Production Engineering, 10-13.06.2015., Vodice, Hrvatska.

Crneković, Mladen and Zorc, Davor and Kunica, Zoran (2013) Mobile robot vision system for object color tracking. = Mobile robot vision system for object color tracking. In: 14th International Scientific Conference on Production Engineering, 19-22.06.2013., Biograd, Hrvatska.

Škugor, Branimir and Deur, Joško and Ivanović, Vladimir (2016) Dynamic programming-based design of shift scheduling map taking into account clutch energy losses during shift transients. = Dynamic programming-based design of shift scheduling map taking into account clutch energy losses during shift transients. In: SAE 2016 World Congress and Exhibition, 12-14.4.2016., Detroit, MI, United States.

Crneković, Mladen and Zorc, Davor and Kunica, Zoran (2012) Research of mobile robot behavior with eMIR. = Research of mobile robot behavior with eMIR. In: International Conference on Innovative Technologies, 26-28.09.2012., Rijeka, Hrvatska.

Škugor, Branimir and Deur, Joško (2015) A nonlinear charge - based model of electric vehicle fleet aggregate battery. = A nonlinear charge - based model of electric vehicle fleet aggregate battery. In: European Battery, Hybrid and Fuel Cell Electric Vehicle Congress (EEVC), 02-04.12.2015., Brussels, Belgium.

Škugor, Branimir and Deur, Joško (2015) Bi-level optimisation framework for electric vehicle fleet charging. = Bi-level optimisation framework for electric vehicle fleet charging. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09-02.10.2015., Dubrovnik, Hrvatska.

Milutinović, Milan and Čorić, Mirko and Deur, Joško (2014) Optimization-based control strategy for a Magnus effect-based airborne wind power production system. = Optimization-based control strategy for a Magnus effect-based airborne wind power production system. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija-Istanbul.

Škugor, Branimir and Deur, Joško (2013) The vehicle fleet data collection, processing, analysis and naturalistic driving cycles synthesis. = The vehicle fleet data collection, processing, analysis and naturalistic driving cycles synthesis. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Škugor, Branimir and Deur, Joško (2013) Instantaneous optimization-based energy management control strategy for extended range electric vehicle. = Instantaneous optimization-based energy management control strategy for extended range electric vehicle. In: SAE 2013 World Congress & Exhibition, 16-18.04.2013., Detroit, MI, United States.

Milutinović, Milan and Čorić, Mirko and Deur, Joško (2013) Optimal control of a Magnus effect-based high altitude wind power production system. = Optimal control of a Magnus effect-based high altitude wind power production system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Jerbić, Bojan and Ćurković, Petar and Stipančić, Tomislav (2011) Automatska montaža dvoručnim robotom. = Dual arm robot automated assembly. In: Inovation + Enterpreneurship = Competitiveness, 15.-16. 09. 2011, Osijek, Republika Hrvatska.

Deur, Joško and Ivanović, Vladimir and Kuang, Ming and Assadian, Francis and Tseng, H. Eric and Hrovat, Davor (2012) Bond graph modeling of automotive transmission and drivelines. = Bond graph modeling of automotive transmission and drivelines. In: MathMod 2012 – 7th Vienna International Conference on Mathematical Modelling, 15-17.02. 2012., Vienna, Austria.

Jerbić, Bojan (2011) Mediji i znanost (i obrazovanje). = Media and science (and education). In: Mediji i znanost, 20.05.2010., Zagreb, Hrvatska.

Jerbić, Bojan and Stipančić, Tomislav and Tomašić, Tomislav (2015) Robotic bodily aware interaction within human environments. = Robotic bodily aware interaction within human environments. In: SAI Intelligent Systems Conference, IntelliSys 2015, 10-11.11.2015., Velika Britanija, London.

Deur, Joško and Barber, Phil and Hancock, Matthew (2011) Design of a cascade structure of sideslip and yaw rate control. = Design of a cascade structure of sideslip and yaw rate control. In: International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2011), 14-19. 08. 2011., Manchester, UK.

Ćurković, Petar and Dubić, Krunoslav and Jerbić, Bojan and Stipančić, Tomislav (2012) Simultaneous coordination of robots with overlapping workspaces. = Simultaneous coordination of robots with overlapping workspaces. In: 23rd International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Sustainability, 21-28.10.2012, Zadar, Hrvatska.

Deur, Joško and Kasać, Josip and Hancock, Matthew and Barber, Phil (2011) A study of optimization-based assessment of global chassis control actuator configurations. = A study of optimization-based assessment of global chassis control actuator configurations. In: International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2011), 14-19. 08. 2011., Manchester, UK.

Stipančić, Tomislav and Jerbić, Bojan and Bučević, Ante and Ćurković, Petar (2012) Programming an industrial robot by demonstration. = Programming an industrial robot by demonstration. In: 23rd DAAAM International Symposium on Intelligent Manufacturing and Automation: : Focus on Sustainability, 24-27.10.2012., Zadar, Hrvatska.