  |
 | Up a level |
Aida, Z.-V. and Palajsa, T. and Čatić, Igor (2010) In-mould decoration. = In-mould decoration. Polimeri : časopis za plastiku i gumu, 30 (3). pp. 138-143. ISSN 0351-1871. . .
Alar, Vesna and Baršić, Gorana and Runje, Biserka and Alar, Željko (2012) The influence of the surface finishing on the electrochemical behaviour of austenitic and superaustenitic steels. = The influence of the surface finishing on the electrochemical behaviour of austenitic and superaustenitic steels. Materialwissenschaft und Werkstofftechnik, 43 (8). pp. 725-732. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 4.
Aleksandrov Fabijanić, Tamara and Alar, Željko and Franz, Mladen (2012) Developement of reference vickers hardness blocks by the powder metallurgy process. = Developement of reference vickers hardness blocks by the powder metallurgy process. In: 20th IMEKO World Congress 2012, 9-14.10. 2012., Busan; South Korea.
Alujević, Neven and Wolf, Hinko and Gardonio, Paolo and Tomac, Ivan (2011) Stability and performance limits for active vibration isolation using blended velocity feedback. = Stability and performance limits for active vibration isolation using blended velocity feedback. Journal of Sound and Vibration, 330 (21). pp. 4981-4997. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 4.
Andrić, Jerolim and Grgić, Mate and Pirić, Karlo and Žanić, Vedran (2012) Structural assessment of innovative design of large livestock carrier. = Structural assessment of innovative design of large livestock carrier. In: 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13-16.09.2011., Genova, Italy.
Anić Vučinić, Aleksandra and Hublin, Andrea and Ružinski, Nikola (2010) Greenhouse gases reduction through waste management in Croatia. = Greenhouse gases reduction through waste management in Croatia. Thermal Science, 14 (3). pp. 681-691. ISSN 0354-9836. . .
Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2011) Comparative analysis of basic procedures for shafting alignment calculation. = Comparative analysis of basic procedures for shafting alignment calculation. In: 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13 September - 16 September 2011., Genova, Italy.
Augustin, Goran and Davila, Slavko and Udiljak, Toma and Staroveški, Tomislav and Brezak, Danko and Babić, Slaven (2012) Temperature changes during cortical bone drilling with a newly designed step drill and an internally cooled drill. = Temperature changes during cortical bone drilling with a newly designed step drill and an internally cooled drill. International Orthopaedics, 36 (7). pp. 1449-1456. ISSN 0341-2695. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). .
Augustin, Goran and Zigman, Tomislav and Davila, Slavko and Udiljak, Toma and Staroveški, Tomislav and Brezak, Danko and Babić, Slaven (2012) Cortical bone drilling and thermal osteonecrosis. = Cortical bone drilling and thermal osteonecrosis. Clinical Biomechanics, 27 (4). pp. 313-325. ISSN 0268-0033. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 7.
Bago, Ivona and Plečko, Vanda and Gabrić Pandurić, Dragana and Schauperl, Zdravko and Baraba, Anja and Anić, Ivica (2013) Antimicrobial efficacy of a high-power diode laser, photo-activated disinfection, conventional and sonic activated irrigation during root canal treatment. = Antimicrobial efficacy of a high-power diode laser, photo-activated disinfection, conventional and sonic activated irrigation during root canal treatment. International Endodontic Journal, 46 (4). pp. 339-347. ISSN 0143-2885. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). .
Baleta, Jakov and Vujanović, Milan and Duić, Neven (2017) Mathematical modelling of surface tension effects in liquid wall films. = Mathematical modelling of surface tension effects in liquid wall films. International Journal of Innovation and Sustainable Development, 11 (1). pp. 85-99. ISSN 1740-8822. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Baleta, Jakov and Vujanović, Milan and Pachler, Klaus and Duić, Neven (2014) Implementation and validation of the mathematical model of surface tension into CFD wall film module. = Implementation and validation of the mathematical model of surface tension into CFD wall film module. In: Joint 11th World Congress on Computational Mechanics, WCCM 2014, the 5th European Conference on Computational Mechanics, ECCM 2014 and the 6th European Conference on Computational Fluid Dynamics, ECFD 2014, 20-25.07.2014., Barcelona; Spain.
Baleta, Jakov and Vujanović, Milan and Pachler, Klaus and Duić, Neven (2015) Numerical modeling of urea water based selective catalytic reduction for mitigation of NOx from transport sector. = Numerical modeling of urea water based selective catalytic reduction for mitigation of NOx from transport sector. Journal of Cleaner Production, 88. pp. 280-288. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.
Balić, Dražen and Lončar, Dražen (2015) Impact of Fluctuating Electricity Prices on Operation Strategy of Trigeneration System. = Impact of Fluctuating Electricity Prices on Operation Strategy of Trigeneration System. Journal of Sustainable Development of Energy, Water and Environment Systems, 3 (3). pp. 315-332. ISSN 1848-9257. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Ban, Marko and Krajačić, Goran and Grozdek, Marino and Ćurko, Tonko and Duić, Neven (2012) The role of cool thermal energy storage (CTES) in the integration of renewable energy sources (RES) and peak load reduction. = The role of cool thermal energy storage (CTES) in the integration of renewable energy sources (RES) and peak load reduction. Energy, 48 (1). pp. 108-117. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 5.
Barbarić, Marina (2014) Fleksibilno vođenje energetskog sustava. = Flexible operation of energy system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Baršić, Gorana (2015) Etaloni hrapavosti Nacionalnoga laboratorija za duljinu RH u području dimenzijskoga mikromjeriteljstva i nanomjeriteljstva. = Croatian national laboratory roughness standards in the field of dimensional micro- and nanometrology. Svijet po mjeri, 4. pp. 41-46. ISSN 1848-7114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.
Baršić, Gorana and Mahović, Sanjin and Picotto, Gian Bartolo and Amer, Mohamed and Runje, Biserka (2011) Groove depth measurements on roughness reference standards of the Croatian National Laboratory for Length (LFSB). = Groove depth measurements on roughness reference standards of the Croatian National Laboratory for Length (LFSB). Measurement Science and Technology, 22 (9). ISSN 0957-0233. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Baršić, Gorana and Mahović, Sanjin and Zorc, Hrvoje (2012) Development of nano-roughness calibration standards. = Development of nano-roughness calibration standards. Measurement Science and Technology, 23 (3). 035009. ISSN 0957-0233. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). .
Bauer, Branko and Topić, Ante and Kralj, Slobodan and Kožuh, Zoran (2011) Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel. = Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel. Materiali in Tehnologije, 45 (5). pp. 413-419. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). .
Baček, Tomislav and Kasać, Josip and Majetić, Dubravko and Brezak, Danko (2012) Real-time vehicle navigation in unknown environment with obstacles using analytical fuzzy controller and potential field method. = Real-time vehicle navigation in unknown environment with obstacles using analytical fuzzy controller and potential field method. In: 2012 IEEE International Conference on Fuzzy Systems, FUZZ 2012, 10-15.06.2012., Brisbane, QLD, Australia.
Begović, Toni (2014) Uređaj za brušenje rubova staklenih ploča. = Glass edging machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Berković-Šubić, Mihaela and Boras, Ivanka and Tonković, Zdenko and Kodvanj, Janoš and Švaić, Srećko and Rodić, Alan and Surjak, Martin and Plačko, Gordan and Frančeski, Joško (2015) Primjena infracrvene termografije kod mehaničkog ispitivanja materijala. = In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.
Berković-Šubić, Mihaela and Rauch, Martina and Dović, Damir and Andrassy, Mladen (2014) Primary energy consumption of the dwelling with solar hot water system and biomass boiler. = Primary energy consumption of the dwelling with solar hot water system and biomass boiler. Energy Conversion and Management, 87. pp. 1151-1161. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.
Bezjak, Mladen and Zvizdić, Davor (2011) Dynamic measurements of the thermal conductivity of insulators. = Dynamic measurements of the thermal conductivity of insulators. International Journal of Thermophysics, 32 (7-8). pp. 1467-1478. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 2.
Bičak, Mateja (2014) Analiza progresivnog kolapsa trupa broda zasnovana na σ-ε krivuljama određenim pomoću nelinearne metode konačnih elemenata. = Hull girder progressive collapse analysis based on σ-ε curves determined by the nonlinear finite element method. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Bobetić, Marko (2018) Definiranje rute za određivanje emisija štetnih tvari vozila u stvarnim uvjetima vožnje. = Route definition for determination of vehicle emissions under real driving conditions. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šagi, Goran.
Boldyryev, Stanislav and Krajačić, Goran (2015) Energy efficiency and carbon footprint reduction for Croatian regions by Total Site integration. = Energy efficiency and carbon footprint reduction for Croatian regions by Total Site integration. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.
Botinčan, Matko and Glavan, Paola and Runje, Davor (2010) Verification of causality requirements in Java memory model is undecidable. = Verification of causality requirements in Java memory model is undecidable. In: 8th International Conference on Parallel Processing and Applied Mathematics, PPAM 2009, 13.-16.09.2009., Wroclaw; Poland.
Božić, Željko and Mlikota, Marijo and Schmauder, Siegfried (2011) Primjena ΔK, ΔJ i ΔCTOD parametara u modeliranju rasta zamornih pukotina. = Application of the ΔK ΔJ and ΔCTOD, parameters in fatigue crack growth modelling. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (3). pp. 459-466. ISSN 1330-3651. Vrsta rada: Review article. Kvartili JCR: Q4 (2011). .
Božić, Željko and Schmauder, Siegfried and Mlikota, Marijo and Hummel, Martin (2013) Fatigue crack growth modelling in welded stiffened panels under cyclic tension. = Fatigue crack growth modelling in welded stiffened panels under cyclic tension. In: 13th International Conference on Fracture 2013, ICF 2013, 16-21.06.2013., Beijing; China.
Brajković, Josip (2018) Projekt grijanja, hlađenja i ventilacije obiteljske kuće s otvorenim bazenom. = Design of heating and ventilation system for a family house with open pool. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smoljan, Darko.
Brezak, Danko and Baček, Tomislav and Majetić, Dubravko and Kasać, Josip and Novaković, Branko (2012) A comparison of feed-forward and recurrent neural networks in time series forecasting. = A comparison of feed-forward and recurrent neural networks in time series forecasting. In: 2012 IEEE Conference on Computational Intelligence for Financial Engineering and Economics, CIFEr 2012, 29-30.03.2012., New York City, NY, United States.
Brezak, Danko and Majetić, Dubravko and Udiljak, Toma and Kasać, Josip (2012) Tool wear estimation using an analytic fuzzy classifier and support vector machines. = Tool wear estimation using an analytic fuzzy classifier and support vector machines. Journal of Intelligent Manufacturing, 23 (3). pp. 797-809. ISSN 0956-5515. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 4.
Brozović, Juraj and Demoli, Nazif and Farkaš, Nina and Sušić, Mato and Alar, Željko and Gabrić Pandurić, Dragana (2014) Properties of axially loaded implant-abutment assemblies using digital holographic interferometry analysis. = Properties of axially loaded implant-abutment assemblies using digital holographic interferometry analysis. Dental Materials, 30 (3). e17-e27. ISSN 0109-5641. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 6.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Šolić, Sanja and Kovačić, Saša (2012) Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. = Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. International Heat Treatment and Surface Engineering, 6 (2). pp. 67-71. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Cajner, Franjo and Landek, Darko and Rafel, Hrvoje and Kovačić, Saša (2012) Effect of the heating rate in the tempering of DIN 100 V1. = Effect of the heating rate in the tempering of DIN 100 V1. HTM - Haerterei-Technische Mitteilungen, 67 (2). pp. 118-124. ISSN 0341-101X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Cajner, Hrvoje and Šakić, Nikola and Ćosić, Predrag (2012) Poboljšanje planova pokusa višekriterijskim pristupom. = Improvement of experimental plans using multi-criteria approach. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (3). pp. 601-606. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Cipek, Mihael and Deur, Joško and Petrić, Joško (2012) Bond graph modeling and power-flow analysis of range extended electric vehicle transmission. = Bond graph modeling and power-flow analysis of range extended electric vehicle transmission. In: 10th International Conference on Bond Graph Modeling and Simulation, ICBGM 2012, 8-11.07.2012., Genova, Italy.
Cipek, Mihael and Kasać, Josip and Pavković, Danijel and Petrić, Joško and Deur, Joško (2012) Optimization of control variables of a series-parallel hybrid electric power train. = Optimization of control variables of a series-parallel hybrid electric power train. In: 2012 IEEE International Conference on Control Applications, CCA 2012, 03-05.10.2012., Dubrovnik, Croatia.
Crneković, Mladen and Zorc, Davor (2012) Kinematic controller for a Mitsubishi RM501 robot. = Kinematic controller for a Mitsubishi RM501 robot. Transactions of FAMENA, 36 (1). pp. 69-77. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 2.
Cukrov, Alen and Tuković, Željko and Galović, Antun (2015) Towards a Moving Mesh Numerical Simulation of a Heated Solid Immersion into Liquid. = Towards a Moving Mesh Numerical Simulation of a Heated Solid Immersion into Liquid. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.
Cundeković, Marko (2014) Izbor materijala temeljen na ontologiji povezanih podataka. = Material selection based on the ontology of linked data. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.
De Marco, Marjam (2018) Primjena metoda strojnog učenja u proizvodnim sustavima. = Application of machine learning methods in production systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Deng, Shuanghui and Wang, Xuebin and Tan, Houzhang and Mikulčić, Hrvoje and Yang, Fuxin and Li, Zhifeng and Duić, Neven (2016) Thermogravimetric study on the co-combustion characteristics of oily sludge with plant biomass. = Thermogravimetric study on the co-combustion characteristics of oily sludge with plant biomass. Thermochimica acta, 633. pp. 69-76. ISSN 0040-6031. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 7.
Deur, Joško and Hancock, Matthew and Assadian, Francis (2011) Design and comparative study of yaw rate control systems with various actuators. = Design and comparative study of yaw rate control systems with various actuators. In: SAE 2011 World Congress and Exhibition, 12-14. 4. 2011., Detroit, United States.
Deur, Joško and Ivanović, Vladimir and Herold, Zvonko and Kostelac, Milan and Tseng, Hongtei Eric (2012) Dry clutch control based on electromechanical actuator position feedback loop. = Dry clutch control based on electromechanical actuator position feedback loop. International Journal of Vehicle Design, 60 (3/4). pp. 305-326. ISSN 0143-3369. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 5.
Deur, Joško and Pavković, Danijel and Burgio, Gilberto and Hrovat, Davor (2011) A model-based traction control strategy non-reliant on wheel slip information. = A model-based traction control strategy non-reliant on wheel slip information. Vehicle System Dynamics, 49 (8). pp. 1245-1265. ISSN 0042-3114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 4.
Dobrović, Slaven and Juretić, Hrvoje and Ljubas, Davor and Vinković Vrček, Ivana and Zebić Avdičević, Maja and Milić, Mirta and Kopjar, Nevenka and Nemet, Ina (2012) Genotoxicity and effects of nanosilver contamination in drinking water disinfection. = Genotoxicity and effects of nanosilver contamination in drinking water disinfection. Water Science and Technology: Water Supply, 12 (6). pp. 829-836. ISSN 1606-9749. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 8.
Dović, Damir and Andrassy, Mladen (2012) Numerically assisted analysis of flat and corrugated plate solar collectors thermal performances. = Numerically assisted analysis of flat and corrugated plate solar collectors thermal performances. Solar Energy, 86 (9). pp. 2416-2431. ISSN 0038-092X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 2.
Drača, Nataša and Tikvica, Ana and Eljuga, Domagoj and Semenski, Damir and Brnčić, Mladen and Vukičević, Slobodan (2011) Biomehanička svojstva kostiju štakora tretiranih sevelamerom. = Biomechanical properties of bones from rats treated with sevelamer. Collegium Antropologicum, 35 (2). pp. 557-563. ISSN 0350-6134. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 6.
Družijanić, Mile (2019) Analiza naprezanja konstrukcije trupa velikog putničkog aviona pri opterećenju momentima savijanja i uvijanja. = Stress Analysis of a Large Passenger Aircraft Fuselage Structure Under Bending and Torsional Loads. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ivančević, Darko.
Dubreta, Nikša and Janković, Vesna and Trbušić, Helena (2010) Modelling a pattern for responsibility: Science and theory of sustainable development. = Modelling a pattern for responsibility: Science and theory of sustainable development. Strojarstvo, 52 (1). pp. 17-22. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.
Duić, Neven and Guzović, Zvonimir and Lund, Henrik (2011) Sustainable development of energy, water and environment systems. = Sustainable development of energy, water and environment systems. Energy, 36 (4). pp. 1839-1841. ISSN 0360-5442. Vrsta rada: Editorial. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Duić, Neven and Rosen, Marc A (2014) Sustainable development of energy systems. = Sustainable development of energy systems. Energy Conversion and Management, 87. pp. 1057-1062. ISSN 0196-8904. Vrsta rada: Editorial. Kvartili JCR: Q1 (2014). Točan broj autora: 2.
Duić, Neven and Urbaniec, Krysztof (2012) 6th Dubrovnik Conference on sustainable development of energy, water and environment systems. = 6th Dubrovnik Conference on sustainable development of energy, water and environment systems. Journal of Cleaner Production, 24. pp. 202-203. ISSN 0959-6526. Vrsta rada: Editorial. Kvartili JCR: Q1 (2012). Točan broj autora: 2.
Duić, Neven and Urbaniec, Krysztof and Huisingh, Donald (2015) Components and structures of the pillars of sustainability. = Components and structures of the pillars of sustainability. Journal of Cleaner Production, 88. pp. 1-12. ISSN 0959-6526. Vrsta rada: Editorial. Kvartili JCR: Q1 (2015). Točan broj autora: 2.
Filetin, Tomislav (2011) Put ka hrvatskom industrijskom identitetu utemeljenom na vlastitim resursima i potencijalima. = A way towards the Croatian industrial identity based on own resources and potentials. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (3). pp. 411-416. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .
Flego, Filip (2014) Tehnološki postupci gradnje čeličnih marikulturnih objekata. = Production technology for steel mariculture objects. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Franičević, Marin (2014) Sustav za upravljanje i nadzor izvršenih radova transportnih vozila. = System for managing and monitoring of completed works in transport vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Galić, Ivica and Tonković, Zdenko and Vučković, Krešimir (2011) Experimental and numerical investigation of collapse and burst pressures for a valve housing. = Experimental and numerical investigation of collapse and burst pressures for a valve housing. Strain, 47 (SUPPL.). e519-e524. ISSN 0039-2103. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 3.
Galović, Antun and Živić, Marija and Krizmanić, Severino (2011) Entropy analysis of adiabatic mixing of three streams of different ideal gases at equal pressures and temperatures. = Entropy analysis of adiabatic mixing of three streams of different ideal gases at equal pressures and temperatures. International Journal of Exergy, 8 (3). pp. 325-332. ISSN 1742-8297. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 3.
Garbatov, Yordan Y. and Rudan, Smiljko and Gaspar, Bruno and Guedes Soares, Carlos (2011) Fatigue assessment of marine structures. = Fatigue assessment of marine structures. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.
García-Camprubí, María and Jasak, Hrvoje and Fueyo, Norberto A. (2011) CFD analysis of cooling effects in H2-fed solid oxide fuel cells. = CFD analysis of cooling effects in H2-fed solid oxide fuel cells. Journal of Power Sources, 196 (17). pp. 7290-7301. ISSN 0378-7753. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Gečevska, Valentina and Veža, Ivica and Čuš, Franc and Anišić, Zoran and Štefanić, Nedeljko (2012) Lean PLM - Information technology strategy for innovative and sustainable business environment. = Lean PLM - Information technology strategy for innovative and sustainable business environment. International Journal of Industrial Engineering and Management, 3 (1). pp. 15-23. ISSN 2217-2661. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Glavaš, Zoran and Unkić, Faruk and Lisjak, Dragutin (2010) The prediction of the microstructure constituents of spheroidal graphite cast iron by using thermal analysis and artificial neural networks. = The prediction of the microstructure constituents of spheroidal graphite cast iron by using thermal analysis and artificial neural networks. Archives of Metallurgy and Materials, 55 (1). pp. 247-253. ISSN 1733-3490. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2010). Točan broj autora: 3.
Glogović, Zlatko and Alar, Vesna and Kožuh, Zoran and Stojanović, Ivan and Kralj, Slobodan (2011) Corrosion properties of thermal sprayed aluminium (TSA) coatings deposited by powder flame spraying. = Corrosion properties of thermal sprayed aluminium (TSA) coatings deposited by powder flame spraying. Materialwissenschaft und Werkstofftechnik, 42 (3). pp. 224-228. ISSN 0933-5137. . .
Glogović, Zlatko and Kožuh, Zoran and Kralj, Slobodan (2012) A mathematical model for the calculation of the adhesion of a flame sprayed coating of aluminum on S 235 JR steel. = A mathematical model for the calculation of the adhesion of a flame sprayed coating of aluminum on S 235 JR steel. Journal of Thermal Spray Technology, 21 (1). pp. 63-76. ISSN 1059-9630. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). .
Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2012) Utjecaj parametara prerade na energijski učinkovito injekcijsko prešanje plastike i gume. = Processing parameters influencing energy efficient injection moulding of plastics and rubbers. Polimeri : časopis za plastiku i gumu, 33 (3-4). pp. 112-117. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Gospić, Ivan and Boras, Ivanka and Mravak, Zoran (2011) Rad broda u nisko-temperaturnom okruženju. = Low-temperature ship operations. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 62 (4). pp. 349-365. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Grgec Bermanec, Lovorka and Martinaga, Marin and Zvizdić, Davor and Šimunović, Vedran (2012) Development of method for determination of pressure balance piston fall rate. = Development of method for determination of pressure balance piston fall rate. In: 20th IMEKO World Congress 2012, 9-14.10. 2012., Busan; South Korea.
Grgić, Domagoj (2019) Stroj za namatanje izolacijskih kapa transformatora. = Machine for winding paper insulation on angle rings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škec, Stanko.
Grilec, Krešimir and Hrabrić, Ivan and Marić, Gojko (2011) Energy absorption of reinforced aluminium foams. = Energy absorption of reinforced aluminium foams. Strojarstvo, 53 (4). pp. 259-264. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Grilec, Krešimir and Marić, Gojko and Miloš, Katica (2012) Aluminijske pjene u izgradnji prometnih sredstava. = Aluminium foams in the design of transport means. Promet-Traffic & Transportation, 24 (4). pp. 295-304. ISSN 0353-5320. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.
Grilec, Krešimir and Ćurković, Lidija and Kumić, Ivan and Baršić, Gorana (2011) Erosion mechanisms of aluminium nitride ceramics at different impact angles. = Erosion mechanisms of aluminium nitride ceramics at different impact angles. Materialwissenschaft und Werkstofftechnik, 42 (8). pp. 712-717. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .
Guzović, Zvonimir and Majcen, Boris and Cvetković, Svetislav (2012) Possibilities of electricity generation in the Republic of Croatia from medium-temperature geothermal sources. = Possibilities of electricity generation in the Republic of Croatia from medium-temperature geothermal sources. Applied Energy, 98. pp. 404-414. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). .
Habla, Florian and Marschall, Holger and Hinrichsen, Olaf and Dietsche, Laura and Jasak, Hrvoje and Favero, Jovani L. (2011) Numerical simulation of viscoelastic two-phase flows using openFOAM®. = Numerical simulation of viscoelastic two-phase flows using openFOAM®. Chemical Engineering Science, 66 (22). pp. 5487-5496. ISSN 0009-2509. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Haramina, Tatjana and Jelavić, Tomislav and Šolić, Tomislav and Katalinić, Marko and Pilipović, Ana (2011) Analiza mogućnosti recikliranja diskontinuiranih E-staklenih vlakana. = Analysis of recycling possibilities of discontinuous E-glass fibres. Polimeri : časopis za plastiku i gumu, 32 (2). pp. 52-61. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Harman, Blahoslav and Opalić, Milan and Vereš, Miroslav (2011) Deterministic and probabilistic methods in determination of correct mating cylindrical teeth profiles. = Deterministic and probabilistic methods in determination of correct mating cylindrical teeth profiles. Strojarstvo, 53 (3). pp. 191-197. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Herold, Zvonko and Libl, Domagoj and Deur, Joško (2010) Design and testing of an experimental magnetorheological fluid clutch. = Design and testing of an experimental magnetorheological fluid clutch. Strojarstvo, 52 (6). pp. 601-614. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.
Hoić, Matija (2007) Analiza pouzdanosti motorne kosilice. = Lawn mower reliability analysis. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.
Hoić, Matija (2015) Modeliranje dinamike suhe dvostruke spojke. = Modeling of dry dual clutch dynamics. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
Horvat, Ivan and Dović, Damir (2015) New method for calculating hourly energy need in HVAC systems. = New method for calculating hourly energy need in HVAC systems. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.
Hrgetić, Mario and Deur, Joško and Pavković, Danijel and Lakehal-Ayat, Mohsen and Tseng, Eric (2009) Adaptive Kalman filter-based yaw rate estimation using accelerometers and wheel speed sensors. = Adaptive Kalman filter-based yaw rate estimation using accelerometers and wheel speed sensors. In: 2009 ASME Dynamic Systems and Control Conference, DSCC2009, 12-14.10.2009., Hollywood, CA, United States.
Hunjet, Inja (2018) Izbor regulacijskih ventila. = Selection of control valves. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Ilijevski, Živko and Završki, Ivica and Kitarović, Petra and Anić Vučinić, Aleksandra and Krapinec, Zvonimir and Kelava, Filip (2011) 20 MWel biomass power plant "Koprivnički Ivanec" in Croatia designed to achieve integrated prevention and control of pollution. = 20 MWel biomass power plant "Koprivnički Ivanec" in Croatia designed to achieve integrated prevention and control of pollution. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Ilinčić, Petar (2015) Višezonski simulacijski model HCCI motora s razdvojenim rješavačem. = Multi zone simulation model for HCCI engine with a segregated solver. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Irsag, Bojan and Pukšec, Tomislav and Duić, Neven (2012) Long term energy demand projection and potential for energy savings of Croatian tourism-catering trade sector. = Long term energy demand projection and potential for energy savings of Croatian tourism-catering trade sector. Energy, 48 (1). pp. 398-405. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 3.
Ivanković, Hrvoje and Tkalčec, Emilija and Orlić, Sebastijan and Gallego Ferrer, Gloria and Schauperl, Zdravko (2010) Hydroxyapatite formation from cuttlefish bones: Kinetics. = Hydroxyapatite formation from cuttlefish bones: Kinetics. Journal of Materials Science: Materials in Medicine, 21 (10). pp. 2711-2722. ISSN 0957-4530. . .
Ivanović, Vladimir and Deur, Joško and Hancock, Matthew and Assadian, Francis (2010) A closed-loop strategy of active differential clutch control. = A closed-loop strategy of active differential clutch control. In: 2009 ASME Dynamic Systems and Control Conference, DSCC2009, 12-14.10.2009., Hollywood, CA; United States.
Ivanović, Vladimir and Deur, Joško and Herold, Zvonko and Hancock, Matthew and Assadian, Francis (2012) Modelling of electromechanically actuated active differential wet-clutch dynamics. = Modelling of electromechanically actuated active differential wet-clutch dynamics. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 226 (4). pp. 433-456. ISSN 0954-4070. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 5.
Ivanović, Vladimir and Deur, Joško and Milutinović, Milan and Tseng, Hongtei Eric (2011) Dynamic model of dual clutch lever-based electromechanical actuator. = Dynamic model of dual clutch lever-based electromechanical actuator. In: ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, 31.10-02.11.2011., Arlington, VA, United States.
Ivanović, Vladimir and Deur, Joško and Tseng, Hongtei Eric (2012) Bond graph model of electromechanical actuation system for a dry dual clutch. = Bond graph model of electromechanical actuation system for a dry dual clutch. In: 10th International Conference on Bond Graph Modeling and Simulation, ICBGM 2012, 8-11.07.2012., Genova; Italy.
Ivančević, Darko and Smojver, Ivica (2011) Hybrid approach in bird strike damage prediction on aeronautical composite structures. = Hybrid approach in bird strike damage prediction on aeronautical composite structures. Composite Structures, 94 (1). pp. 15-23. ISSN 0263-8223. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Ivančević, Darko and Smojver, Ivica (2012) Multiscale analysis of aeronautical composite structures using High Fidelity Generalized Method of Cells. = Multiscale analysis of aeronautical composite structures using High Fidelity Generalized Method of Cells. In: 6th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, 10-14. 9. 2012., Vienna; Austria.
Ivančević, Darko and Smojver, Ivica (2012) Multiscale damage analysis of laminated composite structures using generalized method of cells theory and Abaqus. = Multiscale damage analysis of laminated composite structures using generalized method of cells theory and Abaqus. In: 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, 24.-28.06.2012., Venice; Italy.
Jaganjac, Morana and Prah, Iva Ozana and Čipak, Ana and Cindrić, Marina and Mrakovčić, Lidija and Tatzber, Franz and Ilinčić, Petar and Rukavina, Vinko and Spehar, Branka and Parlov Vuković, Jelena and Telen, Sanda and Uchida, Koji and Lulić, Zoran and Žarković, Neven (2012) Effects of bioreactive acrolein from automotive exhaust gases on human cells in vitro. = Effects of bioreactive acrolein from automotive exhaust gases on human cells in vitro. Environmental Toxicology, 27 (11). pp. 644-652. ISSN 1520-4081. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 14.
Jakopčić, Mirko and Grilec, Krešimir (2011) Utjecaj pregrijavanja cijevi topničkog oružja na otpornost prema abrazijskom trošenju materijala. = Influence of artillery weapon barrel superheat on abrasion wear resistance of material. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2). pp. 173-177. ISSN 1330-3651. Kvartili JCR: Q4 (2011). .
Jakopčić, Mirko and Grilec, Krešimir and Lisjak, Dragutin (2012) Istraživanje utjecaja kemijskog sastava materijala na tvrdoću cijevi topničkih oružja. = Investigation of the material chemical composition influence on artillery weapons barrel hardness. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (4). pp. 893-898. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Jakšetić, Julije and Pečarić, Josip (2010) 4-points Stolasky Means. = 4-points Stolasky Means. Mediterranean Journal of Mathematics, 7 (3). pp. 341-352. ISSN 1660-5446. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2010). Točan broj autora: 2.
Jakšetić, Julije and Pečarić, Josip (2010) Generalized steffensen means. = Generalized steffensen means. Bulletin of the Iranian Mathematical Society, 36 (1). pp. 83-91. ISSN 1018-6301. . .
Jakšetić, Julije and Pečarić, Josip and Rehman, Atiq Ur (2010) On stolarsky and related means. = On stolarsky and related means. Mathematical Inequalities and Applications, 13 (4). pp. 899-909. ISSN 1331-4343. . .
Jarak, Tomislav and Sorić, Jurica (2011) On shear locking in MLPG solid-shell approach. = On shear locking in MLPG solid-shell approach. CMES - Computer Modeling in Engineering and Sciences, 81 (2). pp. 157-193. ISSN 1526-1492. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 2.
Jasak, Hrvoje and Rigler, Damir and Tuković, Željko (2014) Design and implementation of Immersed Boundary Method with discrete forcing approach for boundary conditions. = Design and implementation of Immersed Boundary Method with discrete forcing approach for boundary conditions. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.
Jelavić, Tomislav and Haramina, Tatjana and Pilipović, Ana and Bleiziffer, Jelena (2012) Impact of recycling discontinuous E-glass fibres on building material properties. = Impact of recycling discontinuous E-glass fibres on building material properties. In: 8th Central European Congress on Concrete Engineering, Durability of Concrete Structures, 04.-06.10.2012., Plitvice, Hrvatska.
Jemcov, Aleksandar and Jasak, Hrvoje (2012) Entropy stable multi-dimensional dissipation function for the roe scheme on unstructured meshes. = Entropy stable multi-dimensional dissipation function for the roe scheme on unstructured meshes. In: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 09-12.01.2012., Nashville, TN; United States.
Ji, Lin and Jokić, Marko and Huang, Zhenyu and Alujević, Neven (2013) A simple hybrid approach on predicting the vibration transmission of rib-stiffened plates. = A simple hybrid approach on predicting the vibration transmission of rib-stiffened plates. Transactions of FAMENA, 37 (2). pp. 29-38. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.
Jokić, Andrej and Van Den Bosch, P.P.J. and Virag, Ana and Hermans, R.M. (2012) On zonal pricing for congestion management. = On zonal pricing for congestion management. In: 9th International Conference on the European Energy Market, EEM 12, 10-12.05.2012., Florence, Italy.
Jokić, Marko and Kranjčević, Nenad and Stegić, Milenko (2012) Structural Stiffness Optimization with Respect to Vibration Response. = Structural Stiffness Optimization with Respect to Vibration Response. Transactions of FAMENA, 36 (2). pp. 1-8. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.
Jokić, Marko and Stegić, Milenko and Butković, Mirko (2011) Reduced-order multiple tuned mass damper optimization: A bounded real lemma for descriptor systems approach. = Reduced-order multiple tuned mass damper optimization: A bounded real lemma for descriptor systems approach. Journal of Sound and Vibration, 330 (22). pp. 5259-5268. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Juretić, Hrvoje and Dobrović, Slaven and Ružinski, Nikola and Lovrić, Josip and Pećarević, Marijana and Mikuš, Josip and Crnčević, Marija and Marčelja, Esme-Johanna and Marijanović Rajčić, Marija and Širac, Siniša and Cooper, William John and Grewell, David and van Leeuwen, Joep (Hans) (2011) Pilot studies of ozonation for inactivation of Artemia salina nauplii in ballast water. = Pilot studies of ozonation for inactivation of Artemia salina nauplii in ballast water. Ozone: Science and Engineering, 33 (1). pp. 3-13. ISSN 0191-9512. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 13.
Kallioras, Andreas and Ružinski, Nikola (2011) Special Issue: Sustainable Development of Energy, Water and Environment Systems. = Special Issue: Sustainable Development of Energy, Water and Environment Systems. Water Resources Management, 25 (12). pp. 2917-2918. ISSN 0920-4741. Vrsta rada: Editorial. Kvartili JCR: Q1 (2011). .
Karlović, Sven and Bosiljkov, Tomislav and Brnčić, Mladen and Semenski, Damir and Dujmić, Filip and Tripalo, Branko and Ježek, Damir (2014) Reducing fat globules particle-size in goat milk: Ultrasound and high hydrostatic pressures approach. = Reducing fat globules particle-size in goat milk: Ultrasound and high hydrostatic pressures approach. Chemical and Biochemical Engineering Quarterly, 28 (4). pp. 499-507. ISSN 0352-9568. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 7.
Karlušić, Juraj (2018) Antropomorfna robotska glava. = Antropomorphic robot head. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Karšaj, Igor and Humphrey, Jay D. (2012) A multilayered wall model of arterial growth and remodeling. = A multilayered wall model of arterial growth and remodeling. Mechanics of Materials, 44. pp. 110-119. ISSN 0167-6636. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 2.
Karšaj, Igor and Sorić, Jurica and Humphrey, Jay D. (2011) Numeričko modeliranje rasta i promjene strukture slojeva stijenke aorte. = Numerical modeling of aortic growth and remodeling. In: Četvrti susret Hrvatskog društva za mehaniku, 10.6.2011., Slavonski Brod, Hrvatska.
Kasać, Josip and Deur, Joško and Novaković, Branko and Kolmanovsky, Ilya and Assadian, Francis (2011) A conjugate gradient-based BPTT-like optimal control algorithm with vehicle dynamics control Application. = A conjugate gradient-based BPTT-like optimal control algorithm with vehicle dynamics control Application. IEEE Transactions on Control Systems Technology, 19 (6). pp. 1587-1595. ISSN 1063-6536. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 5.
Kasać, Josip and Milić, Vladimir and Novaković, Branko and Majetić, Dubravko and Brezak, Danko (2012) Initial conditions optimization of nonlinear dynamic systems with applications to output identification and control. = Initial conditions optimization of nonlinear dynamic systems with applications to output identification and control. In: 2012 20th Mediterranean Conference on Control and Automation, MED 2012, 03-06.07.2012., Barcelona, Spain.
Kasać, Josip and Novaković, Branko and Milić, Vladimir (2011) On equivalence between internal and external model-based repetitive learning controllers for nonlinear passive systems. = On equivalence between internal and external model-based repetitive learning controllers for nonlinear passive systems. Asian Journal of Control, 13 (1). pp. 15-24. ISSN 1561-8625. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 3.
Katić, Višnja and Špalj, Stjepan and Opalić, Milan and Domitran, Zoran (2014) Design of orthodontic mini-implants contributing to implantation torque. = Design of orthodontic mini-implants contributing to implantation torque. In: 2nd International Conference on Biodental Engineering, BIODENTAL 2012, 07-08.12.2012., Porto; Portugal.
Keran, Zdenka and Math, Miljenko and Grizelj, Branko (2011) Eksperimentalna i numerička analiza plitkog gravurnog kovanja kao procesa mikrooblikovanja. = Experimental and numerical analysis of coining process using microforming approach. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (4). pp. 505-510. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .
Keran, Zdenka and Math, Miljenko and Piljek, Petar (2011) Modified hydraulic bulging for determination of flow stress curve. = Modified hydraulic bulging for determination of flow stress curve. In: 10th International Conference on Technology of Plasticity, ICTP 2011, 25-30. 10. 2011., Aachen; Germany.
Keran, Zdenka and Math, Miljenko and Škunca, Marko (2011) Determination of flow stress curve by modified hydraulic bulging. = Determination of flow stress curve by modified hydraulic bulging. Transactions of FAMENA, 35 (3). pp. 13-26. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .
Knežević, Predrag and Grgurević, Lovro and Ugleśić, Vedran and Grgurević, Jaka and Drvar, Nenad and Kodvanj, Janoš (2011) Maxillary Fragment Stabilization After Le Fort I Fracture With 1 Screw Pair per Plate. = Maxillary Fragment Stabilization After Le Fort I Fracture With 1 Screw Pair per Plate. Journal of Oral and Maxillofacial Surgery, 69 (4). pp. 1166-1174. ISSN 0278-2391. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 6.
Kopčić, Iva (2017) Raspodjela tlaka u kontaktnim površinama kod sjedenja. = Pressure distribution in sitting contact area. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Kovačević, Ivan (2017) Proračun aerodinamičkih koeficijenata replike Penkalinog zrakoplova. = Penkala Airplane Replica Aerodynamic Coefficients Calculation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijašević, Dubravko.
Kozarac, Darko and Sjerić, Momir and Ilinčić, Petar (2011) Numerical study of influencing factors and the possibility to use vibe parameters in crank-angle resolved HCCI control models. = Numerical study of influencing factors and the possibility to use vibe parameters in crank-angle resolved HCCI control models. In: SAE 2011 World Congress and Exhibition, 12-14. 4. 2011., Detroit, MI; United States.
Kozmar, Hrvoje (2011) Characteristics of natural wind simulations in the TUM boundary layer wind tunnel. = Characteristics of natural wind simulations in the TUM boundary layer wind tunnel. Theoretical and Applied Climatology, 106 (1-2). pp. 95-104. ISSN 0177-798X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 1.
Kozmar, Hrvoje (2012) Improved experimental simulation of wind characteristics around tall buildings. = Improved experimental simulation of wind characteristics around tall buildings. Journal of Aerospace Engineering, 25 (4). pp. 670-679. ISSN 0893-1321. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 1.
Kozmar, Hrvoje (2012) Physical modeling of complex airflows developing above rural terrains. = Physical modeling of complex airflows developing above rural terrains. Environmental Fluid Mechanics, 12 (3). pp. 209-225. ISSN 1567-7419. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 1.
Kozmar, Hrvoje (2011) Truncated vortex generators for part-depth wind-tunnel simulations of the atmospheric boundary layer flow. = Truncated vortex generators for part-depth wind-tunnel simulations of the atmospheric boundary layer flow. Journal of Wind Engineering and Industrial Aerodynamics, 99 (2-3). pp. 130-136. ISSN 0167-6105. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 1.
Kozmar, Hrvoje (2011) Wind-tunnel simulations of the suburban ABL and comparison with international standards. = Wind-tunnel simulations of the suburban ABL and comparison with international standards. Wind and Structures, An International Journal, 14 (1). pp. 15-34. ISSN 1226-6116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 1.
Kozmar, Hrvoje (2011) An alternative approach to experimental simulation of wind characteristics in urban environments. = An alternative approach to experimental simulation of wind characteristics in urban environments. In: Urban Environmental Pollution 2010, 20-23.6.2010., Boston, MA; United States.
Kozmar, Hrvoje and Barić, Emil and Džijan, Ivo (2012) Utjecaj hrapavosti terena na dimenzije recirkulacijske zone vjetra nizvodno od zgrade. = Effect of terrain roughness on the building wake dimensions. Strojarstvo, 54 (4). pp. 273-282. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Kozmar, Hrvoje and Butler, Kyle and Kareem, Ahsan (2012) Transient cross-wind aerodynamic loads on a generic vehicle due to bora gusts. = Transient cross-wind aerodynamic loads on a generic vehicle due to bora gusts. Journal of Wind Engineering and Industrial Aerodynamics, 111. pp. 73-84. ISSN 0167-6105. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 3.
Kozmar, Hrvoje and Procino, Lorenzo and Borsani, Alessandra and Bartoli, Gianni (2012) Sheltering efficiency of wind barriers on bridges. = Sheltering efficiency of wind barriers on bridges. Journal of Wind Engineering and Industrial Aerodynamics, 107-10. pp. 274-284. ISSN 0167-6105. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 4.
Krajačić, Goran and Duić, Neven and Da Graça Carvalho, Maria (2011) How to achieve a 100% RES electricity supply for Portugal? = How to achieve a 100% RES electricity supply for Portugal? Applied Energy, 88 (2). pp. 508-517. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Krajačić, Goran and Duić, Neven and Tsikalakis, Antonis and Zoulias, Manos and Caralis, George and Panteri, Eirini and Carvalho, Maria Graça (2011) Feed-in tariffs for promotion of energy storage technologies. = Feed-in tariffs for promotion of energy storage technologies. Energy Policy, 39 (3). pp. 1410-1425. ISSN 0301-4215. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 7.
Krajačić, Goran and Duić, Neven and Zmijarević, Zlatko and Mathiesen, Brian Vad and Anić Vučinić, Aleksandra and Da Graça Carvalho, Maria (2011) Planning for a 100 independent energy system based on smart energy storage for integration of renewables and CO2 emissions reduction. = Planning for a 100 independent energy system based on smart energy storage for integration of renewables and CO2 emissions reduction. Applied Thermal Engineering, 31 (13). pp. 2073-2083. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 6.
Krajinović, Mario and Marić, Gojko and Šnajdar, Mateja (2011) Design of natural fiber reinforced polymer composite. = Design of natural fiber reinforced polymer composite. Strojarstvo, 53 (4). pp. 265-270. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Krajna, Tamara and Markulin, Helena (2011) Nabava knjižnične građe u visokoškolskim knjižnicama. = Acquisition of library materials in academic libraries. Vjesnik Bibliotekara Hrvatske, 54 (3). pp. 21-42. ISSN 0507-1925. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Krajna, Tamara and Zabjan Bogut, Andrea (2011) Trideset godina časopisa Polimeri: Bibliometrijske značajke kategoriziranih radova. = Thirty years of the Journal Polimeri: Bibliometric features of categorized articles. Polimeri : časopis za plastiku i gumu, 32 (2). pp. 69-75. ISSN 0351-1871. . .
Kram, Mateja and Tošanović, Nataša and Hegedić, Miro (2014) Kaizen approach to supply chain management: First step for transforming supply chain into lean supply chain. = Kaizen approach to supply chain management: First step for transforming supply chain into lean supply chain. In: 12th International Conference on Industrial Logistics, ICIL 2014, 11-13.06.2014, Bol, Brač; Croatia.
Kurajica, Stanislav and Tkalčec, Emilija and Matijašić, Gordana and Ćurković, Lidija and Schauperl, Zdravko and Šipušić, Juraj and Mandić, Vilko (2011) Influence of agglomeration and contamination in the course of amorphous powder grinding on structure and microstructure of sintered mullite. = Influence of agglomeration and contamination in the course of amorphous powder grinding on structure and microstructure of sintered mullite. Croatica Chemica Acta, 84 (1). pp. 63-71. ISSN 0011-1643. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .
Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Lübben, Thomas (2011) End-quench hardenability test for gas quenched steels. = End-quench hardenability test for gas quenched steels. Strojarstvo, 53 (1). pp. 33-37. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Landek, Darko and Župan, Josip and Filetin, Tomislav (2012) Systematic analysis of cooling curves for liquid quenchants. = Systematic analysis of cooling curves for liquid quenchants. International Heat Treatment and Surface Engineering, 6 (2). pp. 51-55. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Lisjak, Dragutin and Marić, Gojko and Štefanić, Nedeljko (2012) Istraživanje mogućnosti primjene neuronske mreže u dijagnostici četverotaktnog benzinskog motora pomoću sadržaja čestica trošenja. = Studying the possibility of neural network application in the diagnostics of a small four-stroke petrol engine by wear particle content. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (4). pp. 857-862. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Liščić, Božidar and Singer, Saša and Beitz, Hartmut (2011) Dependence of heat transfer coefficient at quenching on diameter of cylindrical workpieces. = Dependence of heat transfer coefficient at quenching on diameter of cylindrical workpieces. International Heat Treatment and Surface Engineering, 5 (3). pp. 101-105. ISSN 1749-5148. Vrsta rada: Original scientific paper. . .
Liščić, Božidar and Singer, Saša and Beitz, Hartmut (2011) Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces. = Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces. Journal of ASTM International, 8 (7). ISSN 1546-962X. Vrsta rada: Original scientific paper. . .
Liščić, Božidar and Singer, Saša and Smoljan, Božo (2010) Prediction of quench-hardness within the whole volume of axially symmetric workpieces of any shape. = Prediction of quench-hardness within the whole volume of axially symmetric workpieces of any shape. ASTM Special Technical Publication, 1523 S. pp. 467-488. ISSN 0066-0558. . .
Liščić, Božidar and Singer, Saša and Smoljan, Božo (2010) Prediction of quench-hardness within the whole volume of axially-symmetric workpieces of any shape. = Prediction of quench-hardness within the whole volume of axially-symmetric workpieces of any shape. Strojniški Vestnik/Journal of Mechanical Engineering, 56 (2). pp. 104-114. ISSN 0039-2480. . .
Lojen, Barbara (2018) Pokušaj predviđanja kvarova u plinskom sustavu. = Attempt to predict failures in the gas system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.
Lončar, Dražen and Guzović, Zvonimir and Šerman, Nikola (2014) Performance improvement of biomass cogeneration plant by dual loop organic rankine cycle. = Performance improvement of biomass cogeneration plant by dual loop organic rankine cycle. In: 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2014, 23.-27.08.2014., Prague; Czech Republic.
Lončar, Dražen and Ridjan, Iva (2012) Medium term development prospects of cogeneration district heating systems in transition country - Croatian case. = Medium term development prospects of cogeneration district heating systems in transition country - Croatian case. Energy, 48 (1). pp. 32-39. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 2.
Lovrenić-Jugović, Martina and Tonković, Zdenko and Skozrit, Ivica (2011) Modelling of nonlinear creep and recovery behaviour of cortical bone. = Modelling of nonlinear creep and recovery behaviour of cortical bone. In: 10th International Conference on Fracture and Damage Mechanics, FDM2011, 19-21.09.2011., Dubrovnik; Croatia.
Lovrenić-Jugović, Martina and Tonković, Zdenko and Skozrit, Ivica (2012) Numeričko modeliranje akumuliranja oštećenja u kortikalnom koštanom tkivu. = Numerical modelling of damage accumulation in cortical bone tissue. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (1). pp. 83-91. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Macan, Ivan (2019) Optimizacija parametara elektrolučnog senzora pri MAG zavarivanju. = Through-arc sensor parameter optimization for MAG welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Macura, Hrvoje (2015) Automatsko upravljanje sustava robotske glave i ruke. = Automatic control of a robot head and arm. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Majić, Frane and Virag, Zdravko (2011) Viscous-inviscid interaction method for steady transonic flow. = Viscous-inviscid interaction method for steady transonic flow. Transactions of FAMENA, 35 (2). pp. 35-48. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 2.
Majić, Frane and Voss, Ralph and Virag, Zdravko (2012) Boundary layer method for unsteady transonic flow. = Boundary layer method for unsteady transonic flow. Strojniški Vestnik/Journal of Mechanical Engineering, 58 (7-8). pp. 470-481. ISSN 0039-2480. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 3.
Majić, Marijana and Ćurković, Lidija (2012) Fracture toughness of alumina ceramics determined by vickers indentation technique. = Fracture toughness of alumina ceramics determined by vickers indentation technique. Materialpruefung/Materials Testing, 54 (4). pp. 228-232. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 2.
Majić, Marijana and Ćurković, Lidija and Ćorić, Danko (2011) Load dependence of the apparent Knoop hardness of SiC ceramics in a wide range of loads. = Load dependence of the apparent Knoop hardness of SiC ceramics in a wide range of loads. Materialwissenschaft und Werkstofftechnik, 42 (3). pp. 234-238. ISSN 0933-5137. . .
Majić Renjo, Marijana and Lalić, Marijo and Ćurković, Lidija and Matijašić, Gordana (2012) Rheological properties of aqueous alumina suspensions. = Rheological properties of aqueous alumina suspensions. Materialwissenschaft und Werkstofftechnik, 43 (11). pp. 979-983. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 4.
Maljković, Zlatko and Stegić, Milenko and Kuterovac, Ljiljana (2010) Torsional oscillations of the turbine-generator due to network faults. = Torsional oscillations of the turbine-generator due to network faults. In: 14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010, 6-8.9.2010., Ohrid; Macedonia.
Mandarić, Nedjeljka (2018) Primjena i svojstva bronce za izradu pomorskog brodskog vijka. = Application and properties of bronze in marine propellers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.
Mandić, Vesna and Erić, Dragan and Adamović, Dragan and Janjić, Mileta and Jurković, Zoran and Babić, Živko and Ćosić, Predrag (2012) Simultano inženjerstvo utemeljeno na virtualnoj proizvodnji. = Concurrent engineering based on virtual manufacturing. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (4). pp. 885-892. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 7.
Mandić, Vesna and Ćosić, Predrag (2011) Integrirani razvoj proizvoda i procesa u kolaborativnom virtualnom inženjering okruženju. = Integrated product and process development in collaborative virtual engineering environment. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (3). pp. 369-378. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 2.
Mannini, Claudio and Šoda, Ante and Schewe, Guenter (2011) Numerical investigation on the three-dimensional unsteady flow past a 5:1 rectangular cylinder. = Numerical investigation on the three-dimensional unsteady flow past a 5:1 rectangular cylinder. Journal of Wind Engineering and Industrial Aerodynamics, 99 (4). pp. 469-482. ISSN 0167-6105. Vrsta rada: Original scientific paper. Kvartili JCR: Q2 (2011). .
Marchetti-Deschmann, Martina and Ranić, Jelena and Kurtović, Tihana and Prebeg, Pero and Brgles, Marija and Allmaier, Günter and Halassy, Beata (2016) Optimization of tetanus toxoid ammonium sulfate precipitation process using response surface methodology. = Optimization of tetanus toxoid ammonium sulfate precipitation process using response surface methodology. Preparative Biochemistry and Biotechnology, 46 (7). pp. 695-703. ISSN 1082-6068. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 7.
Marenić, Eduard and Sorić, Jurica and Ibrahimbegovic, Adnan (2012) Adaptive modelling in atomistic-to-continuum multiscale methods. = Adaptive modelling in atomistic-to-continuum multiscale methods. Journal of the Serbian Society for Computational Mechanics, 6 (1). pp. 169-198. ISSN 1820-6530. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Marenić, Eduard and Sorić, Jurica and Tonković, Zdenko (2012) Nano-submodelling technique based on overlapping domain decomposition method. = Nano-submodelling technique based on overlapping domain decomposition method. Transactions of FAMENA, 36 (1). pp. 1-12. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.
Marjanović, Dorian and Štorga, Mario (2011) Product development courses in E-learning environment. = Product development courses in E-learning environment. In: 13th International Conference on Engineering and Product Design Education, E and PDE 2011, 08-09.09.2011., London; United Kingdom.
Markučič, Damir and Mihaljević, Morana and Guliš, Matija (2011) Simulation of ultrasonic pulse propagation through multiple curved boundaries. = Simulation of ultrasonic pulse propagation through multiple curved boundaries. Transactions of FAMENA, 35 (3). pp. 1-12. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Mathiesen, Brian Vad and Duić, Neven and Stadler, Ingo and Rizzo, Gianfranco and Guzović, Zvonimir (2012) The interaction between intermittent renewable energy and the electricity, heating and transport sectors. = The interaction between intermittent renewable energy and the electricity, heating and transport sectors. Energy, 48 (1). pp. 2-4. ISSN 0360-5442. Vrsta rada: Editorial. Kvartili JCR: Q1 (2012). Točan broj autora: 5.
Matijević, Božidar and Kumić, Ivan and Alar, Vesna (2012) Modification of hot work tool steel surfaces by various thermochemical treatments. = Modification of hot work tool steel surfaces by various thermochemical treatments. International Heat Treatment and Surface Engineering, 6 (1). pp. 38-42. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Matijević, Božidar and Kumić, Ivan and Belić, Tomislav (2012) The low temperature aluminising kinetics of hot-work tool steels. = The low temperature aluminising kinetics of hot-work tool steels. HTM Journal of Heat Treatment and Materials, 67 (2). pp. 133-139. ISSN 0341-101X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Matijević, Božidar and Pedišić, Ljiljana and Vlašić, Leon (2012) The influence of quenchant composition on the cooling rate. = The influence of quenchant composition on the cooling rate. HTM Journal of Heat Treatment and Materials, 67 (2). pp. 100-105. ISSN 0341-101X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Matijević, Božidar and Ćurković, Lidija and Rede, Vera (2011) Characterisation and determination of Ni-P coating sputtering rate. = Characterisation and determination of Ni-P coating sputtering rate. International Journal of Microstructure and Materials Properties, 6 (6). pp. 479-485. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2012) Effect of composition on oil quenchant performance. = Effect of composition on oil quenchant performance. International Heat Treatment and Surface Engineering, 6 (1). pp. 15-18. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Matić, Saša (2018) Priprema radioničke dokumentacije upotrebom programa AVEVA. = Hull construction documentation preparation using AVEVA software. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Hadžić, Neven.
Matoković, Matko (2018) Projekt rashladnog sustava za hlađenje visokoregalnih skladišta. = Project of a refrigeration system for cold rooms with pallet racking. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Medić, Srđan and Kondić, Živko and Runje, Biserka (2012) Validacija realizirane mjerne nesigurnosti u postupku umjeravanja preciznih mjernih skala. = Validation of the realised measurement uncertainty in process of precise line scales calibration. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (2). pp. 333-339. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Meylan, Michael H. and Tomić, Marko (2012) Complex resonances and the approximation of wave forcing for floating elastic bodies. = Complex resonances and the approximation of wave forcing for floating elastic bodies. Applied Ocean Research, 36. pp. 51-59. ISSN 0141-1187. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 2.
Mikulandrić, Robert and Krajačić, Goran and Duić, Neven and Khavin, Gennadii and Lund, Henrik and Vad Mathiesen, Brian (2015) Performance Analysis of a Hybrid District Heating System: A Case Study of a Small Town in Croatia. = Performance Analysis of a Hybrid District Heating System: A Case Study of a Small Town in Croatia. Journal of Sustainable Development of Energy, Water and Environment Systems, 3 (3). pp. 282-302. ISSN 1848-9257. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.
Mikulandrić, Robert and Lončar, Dražen and Cvetinović, Dejan and Spiridon, Gabriel and Schneider, Daniel Rolph (2012) Improvement of environmental aspects of thermal power plant operation by advanced control concepts. = Improvement of environmental aspects of thermal power plant operation by advanced control concepts. Thermal Science, 16 (3). pp. 759-772. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 5.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Perković, Luka and Tatschl, Reinhard and Duić, Neven (2012) Numerical modelling of calcination reaction mechanism for cement production. = Numerical modelling of calcination reaction mechanism for cement production. Chemical Engineering Science, 69 (1). pp. 607-615. ISSN 0009-2509. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 7.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2012) CFD analysis of a cement calciner for a cleaner cement production. = CFD analysis of a cement calciner for a cleaner cement production. Chemical Engineering Transactions, 29. pp. 1513-1518. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2013) Numerical analysis of cement calciner fuel efficiency and pollutant emissions. = Numerical analysis of cement calciner fuel efficiency and pollutant emissions. Clean Technologies and Environmental Policy, 15 (3). pp. 489-499. ISSN 1618-954X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 6.
Mikulčić, Hrvoje and Vujanović, Milan and Duić, Neven (2015) Improving the sustainability of cement production by using numerical simulation of limestone thermal degradation and pulverized coal combustion in a cement calciner. = Improving the sustainability of cement production by using numerical simulation of limestone thermal degradation and pulverized coal combustion in a cement calciner. Journal of Cleaner Production, 88. pp. 262-271. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.
Mikulčić, Hrvoje and Vujanović, Milan and Fidaros, Dimitris K. and Priesching, Peter and Minić, Ivica and Tatschl, Reinhard and Duić, Neven and Stefanović, Gordana (2012) The application of CFD modelling to support the reduction of CO2 emissions in cement industry. = The application of CFD modelling to support the reduction of CO2 emissions in cement industry. Energy, 45 (1). pp. 464-473. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 8.
Mikulčić, Hrvoje and Vujanović, Milan and Markovska, Nataša and Filkoski, Risto V. and Ban, Marko and Duić, Neven (2013) CO2 emission reduction in the cement industry. = CO2 emission reduction in the cement industry. Chemical Engineering Transactions, 35. pp. 703-708. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.
Milić, Vladimir and Bemporad, Alberto and Kasać, Josip and Šitum, Željko (2012) Numerical algorithm for nonlinear state feedback H∞ optimal control problem. = Numerical algorithm for nonlinear state feedback H∞ optimal control problem. In: 2012 20th Mediterranean Conference on Control and Automation, MED 2012, 03-06.07.2012., Barcelona, Spain.
Milić, Vladimir and Di Cairano, Stefano and Kasać, Josip and Bemporad, Alberto and Šitum, Željko (2012) A numerical algorithm for nonlinear L2-gain optimal control with application to vehicle yaw stability control. = A numerical algorithm for nonlinear L2-gain optimal control with application to vehicle yaw stability control. In: 51st IEEE Conference on Decision and Control, CDC 2012, 10-13.12.2012., Maui, HI; United States.
Milutinović, Milan and Ivanović, Vladimir and Deur, Joško and Ščap, Dragutin (2012) Geometric analysis of a dual clutch lever-based electromechanical actuator with application to actuator dynamics modelling. = Geometric analysis of a dual clutch lever-based electromechanical actuator with application to actuator dynamics modelling. SAE International Journal of Passenger Cars - Mechanical Systems, 5 (2). pp. 865-875. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Mićić Hot, Jadranka and Jakšetić, Julije and Antunac-Majcen, Morana and Glavan, Paola and Gregorek, Petar (2010) Nastava matematike na prvoj godini Fakulteta strojarstva i brodogradnje Sveučilišta u Zagrebu. = Teaching mathematics in the first year of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb. Poučak : časopis za metodiku i nastavu matematike, 11 (21). pp. 61-74. ISSN 1332-3008. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Mićić Hot, Jadranka and Pavić, Zlatko and Pečarić, Josip (2011) Extension of Jensen's inequality for operators without operator convexity. = Extension of Jensen's inequality for operators without operator convexity. Abstract and Applied Analysis, 2011. ISSN 1085-3375. Vrsta rada: Original scientific paper. Kvartili JCR: Q1 (2011). .
Mićić Hot, Jadranka and Pavić, Zlatko and Pečarić, Josip (2011) Jensen's inequality for operators without operator convexity. = Jensen's inequality for operators without operator convexity. Linear Algebra and Its Applications, 434 (5). pp. 1228-1237. ISSN 0024-3795. Vrsta rada: Original scientific paper. Kvartili JCR: Q2 (2011). .
Mićić Hot, Jadranka and Pavić, Zlatko and Pečarić, Josip (2011) Order among power operator means with condition on spectra. = Order among power operator means with condition on spectra. Mathematical Inequalities and Applications, 14 (3). pp. 709-716. ISSN 1331-4343. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .
Mićić Hot, Jadranka and Pavić, Zlatko and Pečarić, Josip (2012) The inequalities for quasiarithmetic means. = The inequalities for quasiarithmetic means. Abstract and Applied Analysis, 2012. ISSN 1085-3375. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 3.
Mićić Hot, Jadranka and Pečarić, Josip (2010) Order among power means of positive operators, II. = Order among power means of positive operators, II. Scientiae Mathematicae Japonicae, 71 (1). pp. 93-109. ISSN 1346-0862. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Mićić Hot, Jadranka and Pečarić, Josip and Perić, Jure (2012) Extension of the refined Jensen's operator inequality with condition on spectra. = Extension of the refined Jensen's operator inequality with condition on spectra. Annals of Functional Analysis, 3 (1). pp. 67-85. ISSN 2008-8752. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mićić Hot, Jadranka and Pečarić, Josip and Yuki, Seo (2010) Converses of Jensen's operator inequality. = Converses of Jensen's operator inequality. Operators and Matrices, 4 (3). pp. 385-403. ISSN 1846-3886. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2010). Točan broj autora: 3.
Muftić, Osman and Jurčević Lulić, Tanja and Godan, Bruno (2011) Harmonijska raspodjela mase dijelova ljudskog tijela. = Harmonic distribution of the segmental masses of the human body. Sigurnost : časopis za sigurnost u radnoj i životnoj okolini, 53 (1). pp. 1-10. ISSN 0350-6886. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mulc, Tihomir and Udiljak, Toma and Ciglar, Damir (2015) Structure of Reconfigurable Manufacturing Systems. = Structure of Reconfigurable Manufacturing Systems. In: DAAAM International Scientific Book 2015. Vol. 14 . DAAAM International Vienna, Vienna, pp. 369-390. ISBN 978-3-902734-05-1
Müller, Andreas and Terze, Zdravko (2013) Is there an optimal choice of configuration space for lie group integration schemes applied to constrained MBS? = Is there an optimal choice of configuration space for lie group integration schemes applied to constrained MBS? In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2013, 04-07.08.2013., Portland, OR; United States.
Novak, Filip (2014) Utjecaj mjerne sile na rezultate mjerenja unutarnjih i vanjskih promjera. = The influence of measurement force on the results of internal and external diameter measurements. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Novaković, Branko and Kasać, Josip and Kirola, Marijo (2011) Dynamic model of nanorobot motion in multipotential field. = Dynamic model of nanorobot motion in multipotential field. Strojarstvo, 53 (2). pp. 103-111. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Opalić, Milan and Galić, Ivica and Vučković, Krešimir (2012) Influence of the wall thickness on the allowable and failure pressures of two- and tree-way globe valve bodies. = Influence of the wall thickness on the allowable and failure pressures of two- and tree-way globe valve bodies. In: 10th International Conference on Fracture and Damage Mechanics, FDM2011, 19-21.09.2011., Dubrovnik; Croatia.
Opalić, Milan and Vučković, Krešimir and Žeželj, Dragan (2012) Effect of rotational speed on thin-rim gear bending fatigue crack initiation life. = Effect of rotational speed on thin-rim gear bending fatigue crack initiation life. Key Engineering Materials, 488-48. pp. 456-459. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Opetuk, Tihomir and Ćosić, Predrag (2012) Application of group technology for production time estimation. = Application of group technology for production time estimation. Transactions of FAMENA, 36 (3). pp. 55-68. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 2.
Opetuk, Tihomir and Đukić, Goran (2014) Literature Survey of GSCM With Interrelated Concepts. = Literature Survey of GSCM With Interrelated Concepts. Acta Technica Corviniensis - Bulletin of Engineering, 1. pp. 77-90. ISSN 2067-3809. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Oreč, Martin (2017) Konstrukcija stezne naprave za prihvat koštanih uzoraka. = Design of bone sample clamping device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Staroveški, Tomislav.
Osman, Krešimir and Stamenković, Dragi and Lazarević, Mihailo (2011) Robust product architecture development combining matrix-based approaches and function-based failure propagation method - M-FBFP framework. = Robust product architecture development combining matrix-based approaches and function-based failure propagation method - M-FBFP framework. FME Transactions, 39 (4). pp. 145-156. ISSN 1451-2092. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Očić, Anđelko and Haramina, Tatjana (2012) Promjena mehaničkih svojstava procesom starenja polimernih tkanina otpornih na cijepanje i trganje. = Effect of aging on mechanical properties of polymeric ripstop fabrics. Polimeri : časopis za plastiku i gumu, 33 (3-4). pp. 118-123. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Panjan, Peter and Čekada, Miha and Panjan, Matjaž and Kek-Merl, Darja and Zupanič, Franc and Ćurković, Lidija and Paskvale, Srečko (2012) Surface density of growth defects in different PVD hard coatings prepared by sputtering. = Surface density of growth defects in different PVD hard coatings prepared by sputtering. Vacuum, 86 (6). pp. 794-798. ISSN 0042-207X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 7.
Parunov, Joško (2012) ISSC 2012 - The 18th international ship and offshore structures congress. = ISSC 2012 - The 18th international ship and offshore structures congress. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 63 (4). pp. 372-374. ISSN 0007-215X. Vrsta rada: Editorial. Kvartili JCR: Q4 (2012). .
Parunov, Joško and Ćorak, Maro and Pensa, Marina (2011) Wave height statistics for seakeeping assessment of ships in the Adriatic Sea. = Wave height statistics for seakeeping assessment of ships in the Adriatic Sea. Ocean Engineering, 38 (11-12). pp. 1323-1330. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Parunov, Joško and Ćorak, Maro and Senjanović, Ivo (2011) Environmental and operational uncertainties in long-term prediction of slamming loads of containerships. = Environmental and operational uncertainties in long-term prediction of slamming loads of containerships. In: 3rd International Conference on Marine Structures, MARSTRUCT 2011, 28-30.03.2011., Hamburg; Germany.
Pasanec, Josip and Ferdelji, Nenad (2015) Spiralni izmjenjivači topline u kompaktnim parnim toplinskim stanicama. = Helical Heat Exchangers in Compact District Heating Substations. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.
Pavković, Danijel and Deur, Joško and Lisac, Anton (2011) A torque estimator-based control strategy for oil-well drill-string torsional vibrations active damping including an auto-tuning algorithm. = A torque estimator-based control strategy for oil-well drill-string torsional vibrations active damping including an auto-tuning algorithm. Control Engineering Practice, 19 (8). pp. 836-850. ISSN 0967-0661. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 3.
Pavković, Danijel and Kranjčević, Nenad and Kostelac, Milan and Herold, Zvonko and Deur, Joško (2012) Normal force control for a pin-on-disk tribometer including active or passive suppression of vertical vibrations. = Normal force control for a pin-on-disk tribometer including active or passive suppression of vertical vibrations. In: 2012 IEEE International Conference on Control Applications, CCA 2012, 03-05.10.2012., Dubrovnik, Croatia.
Pavković, Neven and Bojčetić, Nenad and Franić, Leonard and Marjanović, Dorian (2011) Case studies to explore indexing issues in product design traceability framework. = Case studies to explore indexing issues in product design traceability framework. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.
Pavković, Neven and Marjanović, Dorian and Kovačević, Antonijo and Fain, Nuša (2011) Industrial partnership in design education - Experiences from EGPR course. = Industrial partnership in design education - Experiences from EGPR course. In: 13th International Conference on Engineering and Product Design Education, E and PDE 2011, 08-09.09.2011., London; United Kingdom.
Pavković, Neven and Tečec Ribarić, Zlatka and Sviličić, Tamara (2012) Traceability case study on rail vehicle control unit development project. = Traceability case study on rail vehicle control unit development project. In: 12th International Design Conference, DESIGN 2012, 21.-24.05.2012., Dubrovnik; Croatia.
Pavlinić, Ivan (2019) Digitalna transformacija proizvodnje. = Digital transformation of manufacturing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Pedišić, Ljiljana and Matijević, Božidar and Munić, Jasminka (2011) The influence of quenchant composition on cooling rate. = The influence of quenchant composition on cooling rate. Strojarstvo, 53 (1). pp. 53-61. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Pedišić, Ljiljana and Ćurković, Lidija and Matijašić, Gordana and Sladojević, Milan (2011) Characterization of the cooling liquid after the machining of Si and SiO2. = Characterization of the cooling liquid after the machining of Si and SiO2. Transactions of FAMENA, 35 (1). pp. 75-82. ISSN 1333-1124. Vrsta rada: Original scientific paper. Kvartili JCR: Q4 (2011). .
Perić, Marko (2018) Naprava za uklanjanje prepreka za vozila posebne namjene. = Obstacle removal device for special-purpose vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.
Perić, Mato and Tonković, Zdenko and Karšaj, Igor (2010) Numerical analysis of residual stresses using a shell/3D modelling technique. = Numerical analysis of residual stresses using a shell/3D modelling technique. In: International Conference on Advances in Welding Science and Technology for Construction, Energy and Transportation, AWST 2010, 11-17.07.2010., Istanbul; Turkey.
Perković, Luka and Silva, Pedro and Ban, Marko and Kranjčević, Nenad and Duić, Neven (2013) Harvesting high altitude wind energy for power production: The concept based on Magnus' effect. = Harvesting high altitude wind energy for power production: The concept based on Magnus' effect. Applied Energy, 101. pp. 151-160. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 5.
Petranović, Zvonimir and Vujanović, Milan and Duić, Neven (2015) Towards a more sustainable transport sector by numerically simulating fuel spray and pollutant formation in diesel engines. = Towards a more sustainable transport sector by numerically simulating fuel spray and pollutant formation in diesel engines. Journal of Cleaner Production, 88. pp. 272-279. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.
Petruschke, Philipp and Gašparović, Goran and Voll, Philip and Krajačić, Goran and Duić, Neven and Bardow, Andre (2014) A hybrid approach for the efficient synthesis of renewable energy systems. = A hybrid approach for the efficient synthesis of renewable energy systems. Applied Energy, 135. pp. 625-633. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 6.
Pilipović, Ana and Raos, Pero and Šercer, Mladen (2011) Eksperimentalno ispitivanje kvalitete polimernih tvorevina proizvedenih LOM postupkom. = Experimental testing of quality of polymer parts produced by laminated object manufacturing - LOM. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2). pp. 253-260. ISSN 1330-3651. Vrsta rada: Preliminary communication. Kvartili JCR: Q4 (2011). .
Pilipović, Ana and Rujnić-Sokele, Maja and Godec, Damir and Šercer, Mladen (2012) Testing of processing and performance properties of marine degradable material. = Testing of processing and performance properties of marine degradable material. Polimeri : časopis za plastiku i gumu, 33 (3-4). pp. 106-111. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Pranjić, Marko (2017) Mobilni robot za slijeđenje linije. = Mobile robot for line tracking. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Prebeg, Pero and Gašparović, Goran and Krajačić, Goran and Duić, Neven (2016) Long-term energy planning of Croatian power system using multi-objective optimization with focus on renewable energy and integration of electric vehicles. = Long-term energy planning of Croatian power system using multi-objective optimization with focus on renewable energy and integration of electric vehicles. Applied Energy, 184. pp. 1493-1507. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Pribanić, Dominik (2019) Numerička simulacija pokusa otpora. = Numerical simulation of the resistance test. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Prpić-Oršić, Jasna and Faltinsen, Odd Magnus and Parunov, Joško (2015) The effect of voluntary speed reduction criteria on attainable ship speed. = The effect of voluntary speed reduction criteria on attainable ship speed. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015 - Towards Green Marine Technology and Transport, 21.-24.09.2015., Pula, Hrvatska.
Pukšec, Tomislav and Duić, Neven (2012) Economic viability and geographic distribution of centralized biogas plants: Case study Croatia. = Economic viability and geographic distribution of centralized biogas plants: Case study Croatia. Clean Technologies and Environmental Policy, 14 (3). pp. 427-433. ISSN 1618-954X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 2.
Pukšec, Tomislav and Duić, Neven (2011) Geographic distribution and economic potential of biogas from Croatian farming sector. = Geographic distribution and economic potential of biogas from Croatian farming sector. Chemical Engineering Transactions, 25. pp. 899-904. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Pukšec, Tomislav and Vad Mathiesen, Brian and Duić, Neven (2011) Long term energy demand projections for croatian transport sector. = Long term energy demand projections for croatian transport sector. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Pustaić, Dragan and Cajner, Franjo (2011) Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. = Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. In: 6th International Conference "Materials Structure and Micromechanics of Fracture, MSMF-6", 28-30.06.2010., Brno; Czech Republic.
Pustaić, Dragan and Lovrenić-Jugović, Martina and Wolf, Hinko (2010) Investigation of crack opening in isotropic strain hardening material. = Investigation of crack opening in isotropic strain hardening material. In: 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, 30.08.-03.09. 2010., Dresden; Germany.
Radiković, Marsel (2018) Zavarivanje duplex čelika praškom punjenom žicom. = Welding of the duplex steel with flux cored wire. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Rauch, Martina and Galović, Antun and Virag, Zdravko (2015) Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency. = Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.
Razum, Stjepan (2012) Mapiranje uslužnih procesa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Rede, Vera and Essert, Sara and Kodvanj, Janoš (2017) Annual ring orientation effect on bending strength of subfossil elm wood. = Annual ring orientation effect on bending strength of subfossil elm wood. Journal of Wood Science. ISSN 1435-0211. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2017). Točan broj autora: 3.
Rodić, Alan (2015) Pristup modelskom prediktivnom upravljanju KGH sustavima u zgradama. = Approach to model predictive control of HVAC in buildings. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.
Roksandić, Roko (2014) Sustav za primjenu kišnice za kućnu upotrebu. = Rainwater harvesting system for domestic use. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.
Rumbak, Slavko and Mudronja, Vedran and Šakić, Nikola and Cajner, Hrvoje and Bogut, Marijan (2010) Analysis of ignition risk to ball bearings in rotating equipment in explosive atmospheres. = Analysis of ignition risk to ball bearings in rotating equipment in explosive atmospheres. In: PCIC Europe 2010 Conference, PCIC EUROPE 2010, 15-17. 06. 2010., Oslo; Norway.
Salopek Čubrić, Ivana and Skenderi, Zenun and Mihelić Bogdanić, Alka and Andrassy, Mladen (2012) Experimental study of thermal resistance of knitted fabrics. = Experimental study of thermal resistance of knitted fabrics. Experimental Thermal and Fluid Science, 38. pp. 223-228. ISSN 0894-1777. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 4.
Sandhu, Maqsood Ahmad and Canen, Alberto Gabbay and Đukić, Goran (2013) Editorial. = Editorial. International Journal of Logistics Systems and Management, 15 (2-3). pp. 125-128. ISSN 1742-7967. Vrsta rada: Editorial. . Točan broj autora: 3.
Sarić, Ivana and Magdić, Antonio and Essert, Mario (2011) Sheme metapodataka značajne za knjižničarstvo s primjerom implementacije OpenURL standarda. = Metadata schemes significant for librarianship with the implementation of the OpenURL standard. Vjesnik Bibliotekara Hrvatske, 54 (1-2). pp. 134-157. ISSN 0507-1925. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Sarić, Ivana and Magdić, Antonio and Essert, Mario (2011) Zotero - program otvorenog koda za upravljanje bibliografskim bilješkama. = Zotero - Open source software for managing the bibliographic references. Vjesnik Bibliotekara Hrvatske, 54 (1-2). pp. 158-171. ISSN 0507-1925. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Schauperl, Zdravko and Nikšić, Mladen and Kolednjak, Davor (2012) Utjecaj vrste goriva na stanje motora s unutrašnjim izgaranjem. = Impact of fuel type on the internal combustion engine condition. Promet-Traffic & Transportation, 24 (4). pp. 285-293. ISSN 0353-5320. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). .
Schneider, Daniel Rolph and Bogdan, Željko (2011) Analysis of a sustainable system for energy recovery from municipal waste in Croatia. = Analysis of a sustainable system for energy recovery from municipal waste in Croatia. Management of Environmental Quality: An International Journal, 22 (1). pp. 105-120. ISSN 1477-7835. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Schneider, Daniel Rolph and Kirac, Mislav and Hublin, Andrea (2012) Cost-effectiveness of GHG emission reduction measures and energy recovery from municipal waste in Croatia. = Cost-effectiveness of GHG emission reduction measures and energy recovery from municipal waste in Croatia. Energy, 48 (1). pp. 203-211. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 3.
Schneider, Daniel Rolph and Kirac, Mislav and Hublin, Andrea (2011) Potential of municipal solid waste for reduction of GHG emissions and energy production in Croatia. = Potential of municipal solid waste for reduction of GHG emissions and energy production in Croatia. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Segurado, Raquel and Krajačić, Goran and Duić, Neven and Alves, Luis Manuel (2011) Increasing the penetration of renewable energy resources in S. Vicente, Cape Verde. = Increasing the penetration of renewable energy resources in S. Vicente, Cape Verde. Applied Energy, 88 (2). pp. 466-472. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 4.
Senjanović, Ivo and Hadžić, Neven and Tomić, Marko (2011) Investigation of restoring stiffness in the hydroelastic analysis of slender marine structures. = Investigation of restoring stiffness in the hydroelastic analysis of slender marine structures. Journal of Offshore Mechanics and Arctic Engineering, 133 (3). ISSN 0892-7219. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 3.
Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung (2012) A simplified geometric stiffness in stability analysis of thin-walled structures by the finite element method. = A simplified geometric stiffness in stability analysis of thin-walled structures by the finite element method. International Journal of Naval Architecture and Ocean Engineering, 4 (3). pp. 313-321. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Senjanović, Ivo and Vladimir, Nikola and Malenica, Šime (2012) Hydroelastic loading and response of ultra large container ships. = Hydroelastic loading and response of ultra large container ships. In: 22nd International Offshore and Polar Engineering Conference, ISOPE-2012, 17-22.06.2012., Rhodes; Greece.
Senjanović, Ivo and Vladimir, Nikola and Malenica, Šime and Tomić, Marko (2011) Improvements of beam structural modelling in hydroelasticity of Ultra Large Container Ships. = Improvements of beam structural modelling in hydroelasticity of Ultra Large Container Ships. In: ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2011, 19 do 24. 06. 2011., Rotterdam; Netherlands.
Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko (2012) Formulation of consistent restoring stiffness in ship hydroelastic analysis. = Formulation of consistent restoring stiffness in ship hydroelastic analysis. Journal of Engineering Mathematics, 72 (1). pp. 141-157. ISSN 0022-0833. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 3.
Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko and Malenica, Šime (2011) A sophisticated beam model for hydroelastic analysis of Ultra Large Container Ships. = A sophisticated beam model for hydroelastic analysis of Ultra Large Container Ships. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.
Singer, Sanja (2012) Orthosymmetric block rotations. = Orthosymmetric block rotations. Electronic Journal of Linear Algebra, 23. pp. 306-326. ISSN 1081-3810. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Singer, Sanja (2012) Perturbation bounds for singular values of matrices with singletons. = Perturbation bounds for singular values of matrices with singletons. Journal of Mathematical Inequalities, 6 (4). pp. 601-613. ISSN 1846-579X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). .
Singer, Sanja and Hari, Vjeran and Singer, Saša (2010) Block-oriented J-Jacobi methods for Hermitian matrices. = Block-oriented J-Jacobi methods for Hermitian matrices. Linear Algebra and Its Applications, 433 (8-10). pp. 1491-1512. ISSN 0024-3795. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2010). Točan broj autora: 3.
Singer, Sanja and Hari, Vjeran and Singer, Saša (2014) Full block J-Jacobi method for Hermitian matrices. = Full block J-Jacobi method for Hermitian matrices. Linear Algebra and Its Applications, 444. pp. 1-27. ISSN 0024-3795. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.
Singer, Sanja and Novaković, Vedran (2011) A GPU-based hyperbolic SVD algorithm. = A GPU-based hyperbolic SVD algorithm. BIT Numerical Mathematics, 51 (4). pp. 1009-1030. ISSN 0006-3835. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). .
Singer, Sanja and Novaković, Vedran and Singer, Saša (2010) Estimates for the spectral condition number of cardinal B-spline collocation matrices. = Estimates for the spectral condition number of cardinal B-spline collocation matrices. Mathematical Communications, 15 (2). pp. 503-519. ISSN 1331-0623. . .
Singer, Sanja and Singer, Saša and Novaković, Vedran and Davidović, Davor and Bokulić, Krešimir and Ušćumlić, Aleksandar (2012) Three-level parallel J-Jacobi algorithms for Hermitian matrices. = Three-level parallel J-Jacobi algorithms for Hermitian matrices. Applied Mathematics and Computation, 218 (9). pp. 5704-5725. ISSN 0096-3003. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). .
Singer, Sanja and Singer, Saša and Novaković, Vedran and Ušćumlić, Aleksandar and Dunjko, Vedran (2012) Novel modifications of parallel Jacobi algorithms. = Novel modifications of parallel Jacobi algorithms. Numerical Algorithms, 59 (1). pp. 1-27. ISSN 1017-1398. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). .
Sjerić, Momir and Kozarac, Darko and Bogensperger, Michael (2012) Implementation of a single zone k-ε turbulence model in a multi zone combustion model. = Implementation of a single zone k-ε turbulence model in a multi zone combustion model. In: SAE 2012 World Congress and Exhibition, 24-26.04.2012., Detroit, MI; United States.
Smojver, Ivica and Ivančević, Darko (2012) Advanced modelling of bird strike on high lift devices using hybrid Eulerian-Lagrangian formulation. = Advanced modelling of bird strike on high lift devices using hybrid Eulerian-Lagrangian formulation. Aerospace Science and Technology, 23 (1). pp. 224-232. ISSN 1270-9638. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 2.
Smojver, Ivica and Ivančević, Darko (2011) Bird strike damage analysis in aircraft structures using Abaqus/Explicit and coupled Eulerian Lagrangian approach. = Bird strike damage analysis in aircraft structures using Abaqus/Explicit and coupled Eulerian Lagrangian approach. Composites Science and Technology, 71 (4). pp. 489-498. ISSN 0266-3538. Vrsta rada: Original scientific paper. Kvartili JCR: Q1 (2011). .
Stanković, Tino and Shea, Kristina and Štorga, Mario and Marjanović, Dorian (2009) Grammatical evolution of technical processes. = Grammatical evolution of technical processes. In: 2009 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009, 30.08-02.09.2009., San Diego, CA; United States.
Stanković, Tino and Shea, Kristina and Štorga, Mario and Marjanović, Dorian (2011) An approach for the automated synthesis of technical processes. = An approach for the automated synthesis of technical processes. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.
Stanković, Tino and Štorga, Mario and Marjanović, Dorian (2012) Synthesis of truss structure designs by NSGA-II and NodeSort algorithm. = Synthesis of truss structure designs by NSGA-II and NodeSort algorithm. Strojniški Vestnik/Journal of Mechanical Engineering, 58 (3). pp. 203-212. ISSN 0039-2480. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 3.
Stanković, Tino and Štorga, Mario and Stojić, Ivan and Savšek, Tomaž (2012) Traceability visualisation toolkit. = Traceability visualisation toolkit. In: 12th International Design Conference, DESIGN 2012, 21.-24.05.2012., Dubrovnik; Croatia.
Stepanić, Josip and Medić, Srđan and Kondić, Živko (2012) Paralaksa u dinamičkom, beskontaktnom i nerazornom, preciznom mjerenju duljina. = Parallax in a dynamic, non-contact & non-destructive, precise length measurement. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (2). pp. 317-320. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Stevanović, Milan and Marjanović, Dorian (2011) The continous "Fuzzy Front End" as a part of the innovation process. = The continous "Fuzzy Front End" as a part of the innovation process. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.
Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2016) Procjena i odabir ideja u procesu inovacije proizvoda – rezultati empirijskog istraživanja. = Idea assessment and selection in product innovation - The empirical research results. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (6). pp. 1707-1716. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2012) Context-aware system applied in industrial assembly environment. = Context-aware system applied in industrial assembly environment. International Journal of Advanced Robotic Systems, 9 (234). ISSN 1729-8806. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2011) Probabilistic approach to robot group control. = Probabilistic approach to robot group control. In: International Conference on Advanced Design and Manufacturing Engineering, ADME 2011, 16-18.09.2011., Guangzhou, China.
Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2011) A robot group control based on Bayesian reasoning. = A robot group control based on Bayesian reasoning. In: World Congress on Engineering 2011, WCE 2011, 06-08.07.2011., London, United Kingdom.
Stipeljković, Matej (2019) Projekt sustava grijanja, hlađenja i ventilacije hotela. = Design of heating, cooling and ventilation system for a hotel building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smoljan, Darko.
Stupnišek, Mladen (2010) Heat treatment in an environmentally-Friendly gas atmosphere. = Heat treatment in an environmentally-Friendly gas atmosphere. In: 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, 26-30.7.2010., Rio de Janeiro; Brazil.
Sviderek, Stanislav (2011) Nestacionarne strujne pojave na ulazu u rotor centrifugalnog ventilatora. = Unsteady flow phenomena at the entrance of the centrifugal fan impeller. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijašević, Branimir.
Tanackov, Ilija J. and Stojić, Gordan S. and Tepić, Jovan and Kostelac, Milan and Sinani, F and Sremac, Siniša R. (2011) Golden ratio (sectiona aurea) in Markovian ants AI hybrid. = Golden ratio (sectiona aurea) in Markovian ants AI hybrid. In: 2nd International Conference on Adaptive and Intelligent Systems, ICAIS 2011, 06-08.09.2011., Klagenfurt; Austria.
Tanackov, Ilija J. and Tepić, Jovan and Kostelac, Milan (2011) Zlatni rez u vjerojatnosti i umjetnoj inteligenciji. = The golden ratio in probablistic and artificial intelligence. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (4). pp. 641-647. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Tanackov, Ilija J. and Tepić, Jovan and Kostelac, Milan and Stojić, Gordan S. and Masal, Z (2012) A virtual mass model in train aerodynamics. = A virtual mass model in train aerodynamics. In: Thirteenth International Conference on Design and Operation in Railway Engineering, 11 - 13 September 2012, New Forest, UK.
Teixeira, Ângelo Palos and Parunov, Joško and Guedes Soares, Carlos (2011) Assessment of ship structural reliability. = Assessment of ship structural reliability. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.
Tepeš, Bojan and Kasać, Josip and Deur, Joško (2012) Optimal control of automated transmission engagement process. = Optimal control of automated transmission engagement process. In: 2012 IEEE International Conference on Control Applications, CCA 2012, 03-05.10.2012., Dubrovnik, Croatia.
Tepić, Jovan and Kostelac, Milan and Stojić, Gordan S. and Tanackov, Ilija J. and Sremac, Siniša R. (2011) Applying methods to reduce rail wear in the railway systems for environmental protection. = Applying methods to reduce rail wear in the railway systems for environmental protection. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Terze, Zdravko and Matijašević, Dubravko and Vrdoljak, Milan and Koroman, Vladimir (2010) Differential-geometric characteristics of optimized generalized coordinates partitioned vectors for holonomic and non-holonomic multibody systems. = Differential-geometric characteristics of optimized generalized coordinates partitioned vectors for holonomic and non-holonomic multibody systems. In: 2009 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009, 30.08-02.09. 2009., San Diego, CA; United States.
Terze, Zdravko and Mueller, Andreas and Zlatar, Dario (2013) Störmer-Verlet integration scheme for multibody system dynamics in lie-group setting. = Störmer-Verlet integration scheme for multibody system dynamics in lie-group setting. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2013, 04-07.08.2013., Portland, OR; United States.
Terze, Zdravko and Müller, Andreas (2010) Preface to Symposium on Computational Geometric Methods in Multibody System Dynamics. = Preface to Symposium on Computational Geometric Methods in Multibody System Dynamics. In: International Conference on Numerical Analysis and Applied Mathematics 2010, ICNAAM-2010, 19-25.09.2010., Rhodes; Greece.
Todić, Velimir V. and Tepić, Jovan and Kostelac, Milan and Lukić, Dejan and Milošević, Miodrag (2012) Dizajn i ekonomska opravdanost primjene grupnih pripremaka. = Design and economic justification of group blanks application. Metalurgija, 51 (2). pp. 269-272. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 5.
Tomić, Denis and Muftić, Osman and Biočić, Berislav (2011) A novel scheduling approach of e-learning content on cloud computing infrastructure. = A novel scheduling approach of e-learning content on cloud computing infrastructure. In: 34th International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2011, 23-27.05.2011., Opatija; Croatia.
Tomić, Mladen and Perković, Luka and Živković, Predrag and Duić, Neven and Stefanović, Gordana (2012) Closed vessel combustion modelling by using pressure-time evolution function derived from two-zonal approach. = Closed vessel combustion modelling by using pressure-time evolution function derived from two-zonal approach. Thermal Science, 16 (2). pp. 561-572. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). .
Tomić, Raimond Ruben (2019) Dizalo s inverznim koloturnikom. = Elevator with reverse pulley. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Hoić, Matija.
Tomić, Rudolf (2015) Model detonantnoga izgaranja u Ottovom motoru. = Model of knock phenomenon in spark ignition engine. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Tuković, Željko and Jasak, Hrvoje (2012) A moving mesh finite volume interface tracking method for surface tension dominated interfacial fluid flow. = A moving mesh finite volume interface tracking method for surface tension dominated interfacial fluid flow. Computers & fluids, 55. pp. 70-84. ISSN 0045-7930. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2012). Točan broj autora: 2.
Turčin, Ivor (2019) Razvoj inovativnih i pametnih proizvoda. = Development of innovative and smart products. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Valentan, Bogdan and Pogačar, Dušan and Brajlih, Tomaž and Zupančič Hartner, Tjaša and Pilipović, Ana and Drstvenšek, Igor (2012) Development of a 3D printer for thermoplastic modelling. = Development of a 3D printer for thermoplastic modelling. Materiali in Tehnologije, 46 (6). pp. 589-594. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). .
Valković, Vladivoj and Sudac, Davorin and Kollar, Robert and Domitran, Zoran and Nad, Karlo and Obhođaš, Jasmina (2012) Inspection of the objects on the sea floor for the presence of explosives. = Inspection of the objects on the sea floor for the presence of explosives. In: Detection and Sensing of Mines, Explosive Objects, and Obscured Targets XVII, 23.–27. 04.2012., Baltimore, MD; United States.
Van Blarigan, Andrew and Kozarac, Darko and Seiser, Reinhard and Chen, Jyh-Yuan and Cattolica, Robert and Dibble, Robert (2012) Experimental study of methane fuel oxycombustion in an SI engine. = Experimental study of methane fuel oxycombustion in an SI engine. In: ASME 2012 Internal Combustion Engine Division Fall Technical Conference, ICEF 2012, 23-26. 9. 2012., Vancouver, BC; Canada.
Varbanov, Sabev Petar and Duić, Neven (2013) Editorial: Strategic supply, security and efficiency of energy systems using renewables, waste and pollution minimisation. = Editorial: Strategic supply, security and efficiency of energy systems using renewables, waste and pollution minimisation. Chemical Engineering Transactions, 34. pp. 1-6. ISSN 1974-9791. Vrsta rada: Editorial. . Točan broj autora: 2.
Veža, Ivica and Gjeldum, Nikola and Mladineo, Marko and Štefanić, Nedeljko (2011) New product introduction by using Hoshin Kanri. = New product introduction by using Hoshin Kanri. In: 21st International Conference on Production Research: Innovation in Product and Production, ICPR 2011, 31.07.-04.08.2011., Stuttgart; Germany.
Virag, Ana and Jokić, Andrej and Lampropoulos, I. and Hermans, R.M. and Van Den Bosch, P.P.J. (2012) An alternative approach for real-time balancing of electrical power systems. = An alternative approach for real-time balancing of electrical power systems. In: 9th International Conference on the European Energy Market, EEM 12, 10-12.05.2012., Florence, Italy.
Virag, Zdravko and Živić, Marija and Krizmanić, Severino (2011) Cooling of a sphere by natural convection - The applicability of the lumped capacitance method. = Cooling of a sphere by natural convection - The applicability of the lumped capacitance method. International Journal of Heat and Mass Transfer, 54 (11-12). pp. 2303-2309. ISSN 0017-9310. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Vukelić, Josipa (2014) Performanse helikoptera u autorotaciji. = Helicopter Performance in Autorotation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Vulinović, Tomislav (2019) Stroj za zelenu rezidbu u vinogradarstvu. = Machine for green pruning of vineyard. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Wang, Xuebin and Xu, Zhaoxia and Wei, Bo and Zhang, Lan and Tan, Houzhang and Yang, Tao and Mikulčić, Hrvoje and Duić, Neven (2015) The ash deposition mechanism in boilers burning Zhundong coal with high contents of sodium and calcium: A study from ash evaporating to condensing. = The ash deposition mechanism in boilers burning Zhundong coal with high contents of sodium and calcium: A study from ash evaporating to condensing. Applied Thermal Engineering, 80. pp. 150-159. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 8.
Wang, Yibin and Tan, Houzhang and Wang, Xuebin and Du, Wenzhi and Mikulčić, Hrvoje and Duić, Neven (2017) Study on extracting available salt from straw / woody biomass ashes and predicting its slagging / fouling tendency. = Study on extracting available salt from straw / woody biomass ashes and predicting its slagging / fouling tendency. Journal of Cleaner Production. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 6. (In Press)
Wiedemair, Wolfgang and Tuković, Željko and Jasak, Hrvoje and Poulikakos, Dimos and Kurtcuoglu, Vartan (2012) On ultrasound-induced microbubble oscillation in a capillary blood vessel and its implications for the blood–brain barrier. = On ultrasound-induced microbubble oscillation in a capillary blood vessel and its implications for the blood–brain barrier. Physics in Medicine and Biology, 57 (4). pp. 1019-1045. ISSN 0031-9155. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 5.
Zeman, Ivan (2019) Numeričko određivanje koeficijenta trenja otpora ravne ploče. = Numerical assessment of the frictional resistance coefficient for a flat plate. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Zidanšek, Aleksander and Dobrović, Slaven (2012) Editorial. = Editorial. International Journal of Environment and Sustainable Development, 11 (1). pp. 1-2. ISSN 1474-6778. Vrsta rada: Editorial. . .
Zvizdić, Davor and Grgec Bermanec, Lovorka (2010) Proficiency test in the gauge pressure range for Croatian accredited laboratories. = Proficiency test in the gauge pressure range for Croatian accredited laboratories. In: 3rd International Metrology Conference 2010, CAFMET 2010, 18-23.4.2010., Cairo; Egypt.
Zvizdić, Davor and Heinonen, Martti and Šestan, Danijel (2012) New Primary Dew-Point Generators at HMI/FSB-LPM in the Range from −70 °C to +60 °C. = New Primary Dew-Point Generators at HMI/FSB-LPM in the Range from −70 °C to +60 °C. International Journal of Thermophysics, 33 (8-9). pp. 1536-1549. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Zvizdić, Davor and Heinonen, Martti and Šestan, Danijel (2012) Primary dew-point generation between 1°C and 60°C at LPM. = Primary dew-point generation between 1°C and 60°C at LPM. In: 20th IMEKO World Congress 2012, 9-14.10. 2012., Busan; South Korea.
Ćatipović, Ivan and Čorić, Većeslav and Veić, Duje (2011) Calculation of floating crane natural frequencies based on linearized multibody dynamics. = Calculation of floating crane natural frequencies based on linearized multibody dynamics. In: ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2011, 19 do 24. 06. 2011., Rotterdam; Netherlands.
Ćatipović, Ivan and Čorić, Većeslav and Vukčević, Vuko (2012) Dynamics of FPSO with polyester mooring lines. = Dynamics of FPSO with polyester mooring lines. In: 22nd International Offshore and Polar Engineering Conference, ISOPE-2012, 17-22.06.2012., Rhodes; Greece.
Ćorić, Danko and Franz, Mladen (2012) Ponašanje termomehanički obrađene CuZnAl-SEPO. = Behaviour of thermo-mechanically treated CuZnAl-SMA. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (3). pp. 595-600. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 2.
Ćosić, Boris and Krajačić, Goran and Duić, Neven (2012) A 100% renewable energy system in the year 2050: The case of Macedonia. = A 100% renewable energy system in the year 2050: The case of Macedonia. Energy, 48 (1). pp. 80-87. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). .
Ćosić, Boris and Markovska, Nataša and Krajačić, Goran and Taseska, Verica and Duić, Neven (2012) Environmental and economic aspects of higher RES penetration into Macedonian power system. = Environmental and economic aspects of higher RES penetration into Macedonian power system. Applied Thermal Engineering, 43. pp. 158-162. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). .
Ćosić, Boris and Markovska, Nataša and Taseska, Verica and Krajačić, Goran and Duić, Neven (2011) Improving the RES absorption capacity of the macedonian energy system. = Improving the RES absorption capacity of the macedonian energy system. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Ćosić, Boris and Markovska, Nataša and Taseska, Verica and Krajačić, Goran and Duić, Neven (2011) The potential of GHG emissions reduction in Macedonia by renewable electricity. = The potential of GHG emissions reduction in Macedonia by renewable electricity. Chemical Engineering Transactions, 25. pp. 57-62. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Ćosić, Boris and Stanić, Zoran and Duić, Neven (2011) Geographic distribution of economic potential of agricultural and forest biomass residual for energy use: Case study Croatia. = Geographic distribution of economic potential of agricultural and forest biomass residual for energy use: Case study Croatia. Energy, 36 (4). pp. 2017-2028. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Ćosić, Predrag and Lisjak, Dragutin and Antolić, Dražen (2011) Regresijska analiza i neuronske mreže kao metode za procjenu proizvodnog vremena. = Regression analysis and neural networks as methods for production time estimation. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (4). pp. 479-484. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Ćurković, Lidija and Kumić, Ivan and Grilec, Krešimir (2011) Solid particle erosion behaviour of high purity alumina ceramics. = Solid particle erosion behaviour of high purity alumina ceramics. Ceramics International, 37 (1). pp. 29-35. ISSN 0272-8842. . .
Ćurković, Lidija and Rede, Vera and Lalić, Marijo (2011) Statistical analysis of fracture toughness of SiC ceramics determined by Vickers indentation method. = Statistical analysis of fracture toughness of SiC ceramics determined by Vickers indentation method. International Journal of Microstructure and Materials Properties, 6 (5). pp. 359-365. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Ćurković, Lidija and Salopek, Sara and Šegota, Suzana and Majić Renjo, Marijana and Tomić, Tanja (2013) AFM characterisation of sol-gel TiO2 films deposited on stainless steel. = AFM characterisation of sol-gel TiO2 films deposited on stainless steel. Materialwissenschaft und Werkstofftechnik, 44 (7). pp. 650-654. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 5.
Ćurković, Lidija and Trgo, Marina and Rožić, Mirela and Vukojević Medvidović, Nediljka (2011) Kinetics and thermodynamics study of copper ions removal by natural clinoptilolite. = Kinetics and thermodynamics study of copper ions removal by natural clinoptilolite. Indian Journal of Chemical Technology, 18 (2). pp. 137-144. ISSN 0971-457X. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .
Ćurković, Petar and Jerbić, Bojan and Stipančić, Tomislav (2010) Cooperative coevolution applied to dual-arm robot motion planning. = Cooperative coevolution applied to dual-arm robot motion planning. In: 10th IFAC Workshop on Intelligent Manufacturing Systems, IMS'10, 01-02.07.2010., Lisbon, Portugal.
Ćurković, Petar and Jerbić, Bojan and Stipančić, Tomislav (2012) Swarm-based approach to path planning using honey bees mating algorithm and adaptive resonance theory (ART1). = Swarm-based approach to path planning using honey bees mating algorithm and adaptive resonance theory (ART1). International Review of Automatic Control, 5 (5). pp. 624-629. ISSN 1974-6059. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Čanžar, Predrag and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2012) Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. = Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. In: 10th International Conference on Fracture and Damage Mechanics, FDM2011, 19-21.09.2011., Dubrovnik; Croatia.
Čanžar, Predrag and Tonković, Zdenko and Kodvanj, Janoš (2012) Influence of graphite morphology on the fatigue behaviour of nodular cast iron. = Influence of graphite morphology on the fatigue behaviour of nodular cast iron. In: 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012, 26 - 31.8.2012., Kazan; Russian Federation.
Čanžar, Predrag and Tonković, Zdenko and Kodvanj, Janoš (2012) Microstructure influence on fatigue behaviour of nodular cast iron. = Microstructure influence on fatigue behaviour of nodular cast iron. Materials Science and Engineering A, 556. pp. 88-99. ISSN 0921-5093. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). .
Čatić, Igor and Barić, Gordana and Galić, Kata and Grancarić, Ana Marija and Rogić, Ana and Rujnić-Sokele, Maja and Karavanić, Ivor (2011) Draft of the basic systematization of inorganic and organic macromolecular compounds. = Draft of the basic systematization of inorganic and organic macromolecular compounds. In: 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, 01.-05.2011., Boston, MA; United States.
Čatić, Igor and Pilipović, Ana and Rujnić-Sokele, Maja (2011) Četrdeseta obljetnica usmjerenja Prerada polimera na Fakultetu strojarstva i brodogradnje Sveučilišta u Zagrebu. = 40th Anniversary of Polymer Processing on the Faculty of Mechanical Engineering and Naval Architecture University of Zagreb. Polimeri : časopis za plastiku i gumu, 32 (1). pp. 4-11. ISSN 0351-1871. Vrsta rada: Editorial. . .
Čatić, Igor and Rujnić-Sokele, Maja and Žagar, Zdravko (2013) Uvod u sustavnosnu analizu tlačnog lijevanja metalnih taljevina. = Introduction to systemic analysis of die-casting of molten metals. Strojarstvo, 55 (3). pp. 181-187. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Čukelj, Fabijan and Knezević, Josip and Kodvanj, Janoš and Bandalović, Ante and Ostojić, Marko and Bilan, Kanito and Pavić, Andrej (2014) Computer representation of osteosynthesis stability in locking plates used for the treatment of osteoporotic proximal humerus fractures. = Computer representation of osteosynthesis stability in locking plates used for the treatment of osteoporotic proximal humerus fractures. Psychiatria Danubina, 26. pp. 14-19. ISSN 0353-5053. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 7.
Đukić, Ankica and Firak, Mihajlo (2011) Hydrogen production using alkaline electrolyzer and photovoltaic (PV) module. = Hydrogen production using alkaline electrolyzer and photovoltaic (PV) module. International Journal of Hydrogen Energy, 36 (13). pp. 7799-7806. ISSN 0360-3199. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Đukić, Goran (2012) Editor's foreword. = Editor's foreword. International Conference on Industrial Logistics, ICIL 2012 - Conference Proceedings. v. . Vrsta rada: Editorial. . .
Đukić, Goran and Opetuk, Tihomir and Tone, Lerher (2016) An integrated model of storage and order-picking area layout design. = An integrated model of storage and order-picking area layout design. In: International Conference on Industrial Logistics: Logistics and Sustainability, ICIL 2016, 28.09.-01.10.2016., Krakow, Poljska.
Šegota, Suzana and Ćurković, Lidija and Ljubas, Davor and Svetličić, Vesna and Fiamengo Houra, Ivona and Tomašić, Nenad (2011) Synthesis, characterization and photocatalytic properties of sol-gel TiO2 films. = Synthesis, characterization and photocatalytic properties of sol-gel TiO2 films. Ceramics International, 37 (4). pp. 1153-1160. ISSN 0272-8842. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 6.
Šercer, Mladen and Godec, Damir and Raos, Pero (2012) From an idea to the final polymer product. = From an idea to the final polymer product. Engineering Review, 32 (1). pp. 41-47. ISSN 1330-9587. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Šestan, Ante and Vladimir, Nikola and Vulić, Nenad and Ljubenkov, Boris (2012) A study into resonant phenomena in the catamaran ferry propulsion system. = A study into resonant phenomena in the catamaran ferry propulsion system. Transactions of FAMENA, 36 (1). pp. 35-44. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 4.
Škec, Stanko and Štorga, Mario and Stanković, Tino and Marjanović, Dorian (2012) Mapping risks in product development. = Mapping risks in product development. In: 12th International Design Conference, DESIGN 2012, 21.-24.05.2012., Dubrovnik; Croatia.
Škreb, Nikola (2019) Aksijalne vibracije namota energetskog transformatora. = Axial vibrations of power transformer windings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.
Škugor, Branimir and Pavković, Danijel and Deur, Joško (2012) A series-parallel hybrid electric vehicle control strategy including instantaneous optimization of equivalent fuel consumption. = A series-parallel hybrid electric vehicle control strategy including instantaneous optimization of equivalent fuel consumption. In: 2012 IEEE International Conference on Control Applications, CCA 2012, 03-05.10.2012., Dubrovnik, Croatia.
Škunca, Marko and Math, Miljenko and Grizelj, Branko (2010) Modified hydraulic bulging in acquisition of stress strain curve. = Modified hydraulic bulging in acquisition of stress strain curve. International Journal of Material Forming, 3 (SUPPL.). pp. 299-302. ISSN 1960-6206. . .
Škunca, Marko and Math, Miljenko and Keran, Zdenka and Grizelj, Branko Numerical 3D simulation of bulk metal forming. = Numerical 3D simulation of bulk metal forming. DAAAM International Scientific Book 2004. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4. (In Press)
Šoda, Ante and Mannini, Claudio and Sjerić, Momir (2011) Investigation of unsteady air flow around two-dimensional rectangular cylinders. = Investigation of unsteady air flow around two-dimensional rectangular cylinders. Transactions of FAMENA, 35 (2). pp. 11-34. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Štefanić, Nedeljko and Gjeldum, Nikola and Mikac, Tonči (2010) Lean concept application in production business. = Lean concept application in production business. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (3). pp. 353-356. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Štefanić, Nedeljko and Tošanović, Nataša and Hegedić, Miro (2012) Kaizen workshop as an important element of continuous improvement process. = Kaizen workshop as an important element of continuous improvement process. International Journal of Industrial Engineering and Management, 3 (2). pp. 93-98. ISSN 2217-2661. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Štorga, Mario and Marjanović, Dorian and Savšek, Tomaž (2011) Reference model for traceability records implementation in engineering design environment. = Reference model for traceability records implementation in engineering design environment. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.
Švaco, Marko and Jerbić, Bojan and Šekoranja, Bojan (2017) Algoritam planiranja zasnovan na interpretaciji prostornih struktura. = Task planning based on the interpretation of spatial structures. Tehnički vjesnik – Technical Gazette: Scientific professional Journal of technical faculties of the Josip Juraj Strossmayer University of Osijek., 24 (2). pp. 427-434. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2017). Točan broj autora: 3.
Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Autonomous planning framework for distributed multiagent robotic systems. = Autonomous planning framework for distributed multiagent robotic systems. In: 2nd IFIP WG 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2011, 21-23.02.2011., Costa de Caparica; Portugal.
Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) A multiagent framework for industrial robotic applications. = A multiagent framework for industrial robotic applications. In: Complex Adaptive Systems, 31.10-02.11.2011., Chicago, IL, United States.
Švaić, Vjeran and Lukenda, Željko and Županić, Danijel and Bolarić, Antonio and Jurinjak, Bojan (2015) Dynamics of skin temperature of the knees during physical exercise measured by infrared thermography. = Dynamics of skin temperature of the knees during physical exercise measured by infrared thermography. In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.
Žanić, Vedran and Pirić, Karlo and Prebeg, Pero (2014) Ship structural design support methodology for the reliability based design optimization (RBDO). = Ship structural design support methodology for the reliability based design optimization (RBDO). In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.
Žanić, Vedran and Prebeg, Pero and Čudina, Predrag (2012) Multiattribute decision making methodology for handymax tanker design in the concept design phase-A case study. = Multiattribute decision making methodology for handymax tanker design in the concept design phase-A case study. In: 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13 September - 16 September 2011., Genova, Italy.
Žiha, Kalman (2011) Modeling of worsening. = Modeling of worsening. In: International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011, 19-22.07.2011., Orlando, FL; United States.
Žiha, Kalman (2013) Statistical variability vs. probabilistic uncertainty. = Statistical variability vs. probabilistic uncertainty. In: 35th International Conference on Information Technology Interfaces, ITI 2013, 24-27.06.2013., Cavtat / Dubrovnik; Croatia.
Žiha, Kalman and Kodvanj, Janoš and Ljubenkov, Boris and Dupor, Nikola and Bakić, Ante (2012) Strength and reliability of ships 'as-built'. = Strength and reliability of ships 'as-built'. In: ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2012, 01-06.07.2012., Rio de Janeiro, Brazil.
Žiha, Kalman and Skala, Karolj (2010) Virtual modelling in shipbuilding. = Virtual modelling in shipbuilding. In: 33rd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2010, 24-28.05.2010., Opatija; Croatia.
Žukina, Mihaela (2019) Odnos između brzine ultrazvuka i svojstava materijala. = Relationship between ultrasonic velocity and material properties. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mihaljević, Morana.
Župan, Josip and Filetin, Tomislav and Landek, Darko (2012) The effect of TiO2 nanoparticles on fluid quenching characteristics. = The effect of TiO2 nanoparticles on fluid quenching characteristics. International Heat Treatment and Surface Engineering, 6 (2). pp. 56-60. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Župan, Josip and Filetin, Tomislav and Žmak, Irena (2012) Enhancement of heat transfer characteristics of liquid quenchants. = Enhancement of heat transfer characteristics of liquid quenchants. In: 6th International Quenching and Control of Distortion Conference: Quenching Control and Distortion, 09-13.09.2012., Chicago, IL; United States.
Županić, Doris and Bolarić, Antonio and Stančić, Mia and Piljek, Denis and Jurinjak, Bojan (2015) Thermal imaging of the outer surface of the Laboratory for engines and vehicles at the Faculty of mechanical engineering and naval architecture. = Thermal imaging of the outer surface of the Laboratory for engines and vehicles at the Faculty of mechanical engineering and naval architecture. In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.
