Items where Subject is "TECHNICAL SCIENCE > Metallurgy"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | K | L | M | P | R | S | V | Ž
Number of items at this level: 28.

A

Aleksandrov Fabijanić, Tamara and Alar, Željko and Sakoman, Matija (2016) Multilayer gradient PACVD coating on cemented carbides. = Multilayer gradient PACVD coating on cemented carbides. In: World PM2016 Congress/Exhibition, 09-13.10.2016, Hamburg, Njemačka.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Ćorić, Danko (2016) Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides. = Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides. International journal of refractory metals & hard materials, 54. pp. 82-89. ISSN 0263-4368. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.

Aleksandrov Fabijanić, Tamara and Jakovljević, Suzana and Franz, Mladen and Jeren, Ivan (2016) Influence of grain growth inhibitors and powder size on the properties of ultrafine and nanostructured cemented carbides sintered in hydrogen. = Influence of grain growth inhibitors and powder size on the properties of ultrafine and nanostructured cemented carbides sintered in hydrogen. Metals, 6 (9). ISSN 2075-4701. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

B

Brlić, Tin and Rešković, Stoja and Jakovljević, Suzana and Jandrlić, Ivan (2016) Distribution control of trace elements in aluminium oxide ceramics by scanning electron microscope equipped with EDS detector. = Distribution control of trace elements in aluminium oxide ceramics by scanning electron microscope equipped with EDS detector. In: MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.

K

Katinić, Domagoj (2017) Elektrokemijsko ispitivanje TiMg kompozita. = Electrochemical evaluation of TiMg composite material. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Kerolli-Mustafa, Mihone and Ćurković, Lidija and Holjevac- Grgurić, Tamara and Šipušić, Juraj (2014) Characterization of open-dumped jarosite waste at mitrovica industrial park, kosovo. = Characterization of open - dumped jarosite waste at mitrovica industrial park , kosovo. In: 14th International Foundrymen Conference, Development and Optimization of the Castings Production Processes, 15-16.05.2014., Opatija, Hrvatska.

L

Lovrenić-Jugović, Martina and Tonković, Zdenko and Slokar, Ljerka (2014) Cyclic creep and recovery behaviour of glass fibre reinforced epoxy composite. = Cyclic creep and recovery behaviour of glass fibre reinforced epoxy composite. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

M

Majić Renjo, Marijana and Rede, Vera and Ćurković, Lidija (2014) Reverse indentation size effect of a duplex steel. = Reverse indentation size effect of a duplex steel. Kovove Materialy, 52 (5). pp. 299-304. ISSN 0023-432X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

Matijević, Božidar (2014) Evaluation of Boride Layer Growth on Carbon Steel Surfaces. = Evaluation of Boride Layer Growth on Carbon Steel Surfaces. Metal Science and Heat Treatment, 56 (5-6). pp. 269-273. ISSN 0026-0673. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 1.

Matijević, Božidar (2012) Primjena niskotemperaturnog aluminiziranja kod čelika za topli rad. = Application of low temperature aluminizing on hot work tool steels. In: Međunarodno savjetovanje Toplinska obrada i inženjerstvo površina - europske mogućnosti hrvatskog gospodarstva, 11.05.2012., Rijeka, Republika Hrvatska.

Matijević, Božidar (2014) Study of the growth of boride layer on the surface carbon steel. = Study of the growth of boride layer on the surface carbon steel. Metallovedenie i termicheskaya obrabotka metallov, 153. pp. 41-45. ISSN 0026-0819. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Matijević, Božidar (2010) A low temperature aluminizing treatment of hot work tool steel. = A low temperature aluminizing treatment of hot work tool steel. In: 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, 26-30.7.2010., Rio de Janeiro; Brazil.

Matijević, Božidar (2013) A model of vanadium carbide growth on steel surfaces obtained by thermo reactive deposition. = A model of vanadium carbide growth on steel surfaces obtained by thermo reactive deposition. JOM, 65 (11). pp. 1395-1402. ISSN 1047-4838. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 1.

Matijević, Božidar and Kumić, Ivan and Alar, Vesna (2012) Modification of the hot work tool steel surface by different thermochemical treatments. = Modification of the hot work tool steel surface by different thermochemical treatments. International Heat Treatment and Surface Engineering, 6 (1). pp. 38-42. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Matijević, Božidar and Kumić, Ivan and Alar, Vesna (2011) Modification of the hot work tool steel surface by different thermochemical treatments. = Modification of the hot work tool steel surface by different thermochemical treatments. In: 19th IFHTSE Congress, 17-20.10.2011., Glasgow.

Matijević, Božidar and Kumić, Ivan and Belić, Tomislav (2011) The low temperature aluminising kinetics of hot-work tool steels. = The low temperature aluminising kinetics of hot-work tool steels. In: International Conference on "Heat Treatment and Surface Engineering of Tools and Dies" (3 ; 2011), 23.-25.03.2011., Wels, Austrija.

Matijević, Božidar and Kumić, Ivan and Belić, Tomislav (2012) The low temperature aluminizing kinetic of hot work tool steels. = The low temperature aluminizing kinetic of hot work tool steels. Journal of Heat Treatment and Materials, 67 (2). pp. 133-139. ISSN 1867-2493. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Matijević, Božidar and Pedišić, Ljiljana (2011) The influence of quenchant composition on the cooling rate. = The influence of quenchant composition on the cooling rate. In: The European Conference of Heat Treatment "Quality in Heat Treatment" (3 ; 2011), 23.-25.03.2011., Wels, Austrija.

Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2012) Properties of different compositions of oils as quenchants. = Properties of different compositions of oils as quenchants. International Heat Treatment and Surface Engineering, 6 (1). pp. 15-18. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Mioč, Boro and Rede, Vera and Mikec, Matija and Ćurković, Lidija (2012) Mikrostrukturne promjene aluminiziranog austenitnog nehrđajućeg čelika. = Microstructure changes of aluminized austenitic stainless steel. In: Interantional Conference on Materials, Tribology, Recycling, Vela Luka, Hrvatska.

P

Perić, Mato and Tonković, Zdenko and Garašić, Ivica and Vuherer, Tomaž (2016) An engineering approach for a T-joint fillet welding simulation using simplified material properties. = An engineering approach for a T-joint fillet welding simulation using simplified material properties. Ocean engineering, 128. pp. 13-21. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Perić, Mato and Tonković, Zdenko and Rodić, Alan and Surjak, Martin and Garašić, Ivica and Boras, Ivanka and Švaić, Srećko (2014) Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weld. = Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weld. Materials and Design, 53. pp. 1052-1063. ISSN 0261-3069. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 7.

R

Rede, Vera and Mioč, Boro and Ćurković, Lidija and Majić Renjo, Marijana (2012) Synthesis and characterization of pack cemented aluminide coating on stainless steel. = Synthesis and characterization of pack cemented aluminide coating on stainless steel. In: International Scientific and Expert Conference "Technique, Education, Agriculture & Management" (4 ; 2012), 17.-19.10.2012., Slavonski Brod, Hrvatska.

S

Schauperl, Zdravko and Kožuh, Zoran and Kralj, Slobodan and Šnajdar, Mateja and Glogović, Zlatko (2012) Structural transformation of steel induced by application of oxyfuel gas cutting using acetylene and propane/butane mixture. = Structural transformation of steel induced by application of oxyfuel gas cutting using acetylene and propane/butane mixture. In: 12th International Foundrymen Conference, Opatija, Hrvatska.

Senčič, Bojan and Šolić, Sanja and Leskovšek, Vojteh (2014) Fracture toughness-Charpy impact test-Rockwell hardness regression based model for 51CrV4 spring steel. = Fracture toughness-Charpy impact test-Rockwell hardness regression based model for 51CrV4 spring steel. Materials Science and Technology (United Kingdom), 30 (12). pp. 1500-1505. ISSN 0267-0836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.

V

Veljačić, Zoran and Mihalic, Ivana and Schauperl, Zdravko and Šolić, Sanja and Bauer, Branko Karakterizacija mikrostrukture izotermički poboljšanog nodularnog lijeva. = Microstructural characterisation of austempered ductile iron. Ljevarstvo. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5. (Unpublished)

Viskić, Joško and Schauperl, Zdravko and Ćatić, Amir and Balog, Martin and Krizik, Petar and Gržeta, Biserka and Popović, Jasminka and Milardović Ortolan, Slađana and Mehulić, Ketij (2014) Utjecaj obrade erozimatom na mikrostukturu površine titana dobivenog metalurgijom praha. = Effects of wire EDM on the microstructure of P/M titanium samples. Acta stomatologica Croatica, 48 (4). pp. 285-291. ISSN 0001-7019. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 9.

Ž

Žmak, Irena and Filetin, Tomislav and Unkić, Faruk (2016) Ductile iron microstructure prediction based on melt thermal analysis using artificial neural networks. = Ductile iron microstructure prediction based on melt thermal analysis using artificial neural networks. In: The 48th International October Conference on Mining and Metallurgy, 28.09.-01.10.2016., Bor, Srbija.

This list was generated on Thu Apr 26 06:28:54 2018 CEST.