Items where Subject is "TECHNICAL SCIENCE > Mechanical Engineering"

A

Ababneh, Amer Khalil and Jawarneh, Ali M. and Tarawneh, Mohammad Al and Tlilan, Hitham M. and Duić, Neven (2016) Evaluation of Solar Parabolic Trough Collector for the Application of Seawater Desalination. = Evaluation of Solar Parabolic Trough Collector for the Application of Seawater Desalination. International Review of Mechanical Engineering, 10 (6). pp. 443-451. ISSN 1970-8734. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Abramović, Luka (2019) Numerička analiza čelične konstrukcije koša za košarku. = Numerical analysis of steel structure of basket for basketball. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Abrashi, Arijan and Štefanić, Nedeljko and Kovačec, Miroslav (2010) The Advantages of Using Diploid Chromosomes in Solving Permutation Class of problems. = The Advantages of Using Diploid Chromosomes in Solving Permutation Class of problems. In: MOTSP2010, 2nd International Scientific Conference Management of Technology – Step to Sustainable Production, 02.-04.06.2010., Rovinj; Croatia.

Abrashi, Arijan and Štefanić, Nedeljko and Lisjak, Dragutin (2010) Solving JSSP by introducing hamilton similarity and time dependent fitness scaling. = Solving JSSP by introducing hamilton similarity and time dependent fitness scaling. Strojniški Vestnik/Journal of Mechanical Engineering, 56 (5). pp. 330-339. ISSN 0039-2480. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2010). Točan broj autora: 3.

Ajduković, Ante (2015) Analiza proizvodnje u tvornici proizvoda za odvodnju i kanalizaciju. = Analysis of the production in the factory of products for drainage and sewage. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Ajduković, Ante (2016) Utjecaj temperature na jamičastu koroziju nehrđajućih čelika. = Effect of temperature on pitting of stainless steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Alar, Vesna and Alar, Željko and Jakovljević, Suzana and Runje, Biserka (2013) Influence of thermal and electrochemical oxidation on the mechanical and corrosion properties of titanium alloy. = Influence of thermal and electrochemical oxidation on the mechanical and corrosion properties of titanium alloy. Kovove Materialy, 51 (4). pp. 251-256. ISSN 0023-432X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.

Alar, Vesna and Esih, Ivan (2012) Sklonost nehrđajućih čelika lokalnoj koroziji. = Tendency of stainless steel local corrosion. In: Korozija i zaštita materijala. ITNMS, Beograd, pp. 39-49. ISBN 978-86-913303-2-3

Alar, Vesna and Esih, Ivan and Budić, Ivan (2011) Effects of Thermal Oxidation and Subsequent Pickling on Pitting Geometry of Austenitic Stainless Steels in Chloride Solutions. = Effects of Thermal Oxidation and Subsequent Pickling on Pitting Geometry of Austenitic Stainless Steels in Chloride Solutions. Materials testing (Materialprufung), 53. pp. 634-638. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Alar, Vesna and Juraga, Ivan and Stojanović, Ivan and Šimunović, Vinko and Borko, Tihomir (2013) Experimental study of imidazoline as an inhibitor of carbon steel in acid media. = Experimental study of imidazoline as an inhibitor of carbon steel in acid media. Materials Testing, 55 (4). pp. 285-289. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 5.

Alar, Vesna and Juraga, Ivan and Stojanović, Ivan and Šimunović, Vinko and Kapor, Frankica (2013) Electrochemical properties of stainless steels in the seawater. = Electrochemical properties of stainless steels in the seawater. In: European Corrosion Congress, EUROCORR 2013, 01-05.09.2013., Estoril; Portugal.

Alar, Vesna and Runje, Biserka and Alar, Željko (2010) Waste water treatment after removal of thermic oxides from stainless steel welding joints. = Waste water treatment after removal of thermic oxides from stainless steel welding joints. Scholarly Research Exchange Engineering, 3. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Alar, Vesna and Runje, Biserka and Baršić, Gorana (2010) Influence of surface texture on electrochemical potential. = Influence of surface texture on electrochemical potential. Materialwissenschaft und Werkstofftechnik, 41 (10). pp. 875-878. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Alar, Vesna and Runje, Biserka and Ivušić, Franjo and Horvatić Novak, Amalija and Mihaljević, Morana (2016) Corrosion behaviour of stainless steel in contact with wine and beer. = Corrosion behaviour of stainless steel in contact with wine and beer. Metalurgija, 55 (3). pp. 437-449. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 5.

Alar, Vesna and Stojanović, Ivan and Mihalic, Ivana (2011) Zaštita ugljičnog čelika vodorazrjedivim premazima. = Protection of steel by waterborne coatings. Zaštita materijala, 52 (3). pp. 201-203. ISSN 0351-9465. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Alar, Vesna and Stojanović, Ivan and Užarević, Ivan and Martinez, Sanja (2013) Fizikalno-kemijska svojstva epoksidnih i poliesterskih premaza nanesenih elektrostatskim naprašivanjem. = Physical and chemical properties of epoxy and polyester coating applied by electrostatic spraying. In: International Conference on Materials, Tribology, Recycling "MATRIB 2013", 27-29.06.2013., Vela Luka, Hrvatska.

Alar, Vesna and Stojanović, Ivan and Šimunović, Vinko (2014) Mehanizmi zaštite od korozije (praktikum za vježbe). = Mechanisams of Corrosion Protection (practicum for exercise). [Teaching Resource] (Unpublished)

Alar, Vesna and Stojanović, Ivan and Židov, Bruno (2012) Dependence of steel workpiece corrosion rate on the emulsion concentration for machining. = Dependence of steel workpiece corrosion rate on the emulsion concentration for machining. Materials Testing, 54. pp. 314-317. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.

Alar, Vesna and Stojanović, Ivan and Židov, Bruno and Ivušić, Franjo (2013) Corrosion resistance of high alloyed materials in 3.5% NaCl solution at elevated temperature. = Corrosion resistance of high alloyed materials in 3.5% NaCl solution at elevated temperature. International Journal of Electrochemical Science, 8 (12). pp. 12476-12486. ISSN 1452-3981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 4.

Alar, Vesna and Stojanović, Ivan and Židov, Bruno and Kapor, Frankica (2011) Utjecaj emulzije na brzinu korozije čeličnog obratka. = Influence of emulsion on the corrosion rate of steel workpiece. In: XIII YUCORR, 5-8.04.2011., Tara, Srbija.

Alar, Vesna and Šimunović, Vinko and Juraga, Ivan (2011) Korozija i zaštita (skripta). = Corrosion and Protection. FSB. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3. (Unpublished)

Alar, Vesna and Šimunović, Vinko and Stojanović, Ivan (2014) Kemijska obrada površine nehrđajućeg čelika AISI 304L i utjecaj na korozijsku otpornost. = Chemical surface treatment of AISI 304L stainless steel and influence on corrosion resistance. Zavarivanje, 3/4. pp. 93-101. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Alar, Vesna and Žmak, Irena and Runje, Biserka and Horvatić Novak, Amalija (2016) Development of models for prediction of corrosion and pitting potential on AISI 304 stainless steel in different environmental conditions. = Development of models for prediction of corrosion and pitting potential on AISI 304 stainless steel in different environmental conditions. International Journal of Electrochemical Science, 11. pp. 7674-7689. ISSN 1452-3981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 4.

Alar, Željko and Franz, Mladen and Aleksandrov Fabijanić, Tamara (2010) Investigation of test force of reference hardness standard of Croatia. = Investigation of test force of reference hardness standard of Croatia. In: 21st Conference on Measurement of Force, Mass and Torque, 21.-25.11.2010., Pattaya; Thailand.

Alar, Željko and Franz, Mladen and Aleksandrov Fabijanić, Tamara and Šolić, Sanja (2009) Installation and uncertainty evaluation of reference hardness standard of croatia. = Installation and uncertainty evaluation of reference hardness standard of croatia. In: XIX IMEKO World Congress Fundamental and Applied Metrology, Lisabon, Portugal.

Alberg Ostergaard, Poul and Duić, Neven (2014) Sustainable Energy, Water and Environmental Systems. = Sustainable Energy, Water and Environmental Systems. International Journal of Sustainable Energy Planning and Management, 3. pp. 1-4. ISSN 2246-2929. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Aleksandrov Fabijanić, Tamara and Alar, Željko (2015) Nanostructured WC - Co hardmetal as reference material for high hardness range. = Nanostructured WC - Co hardmetal as reference material for high hardness range. In: EURO PM2015 congress&exhibition, Reims, Francuska.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Franz, Mladen and Ćorić, Danko (2011) Investigation of the reference hardness block quality. = Investigation of the reference hardness block quality. In: INTERNATIONAL CONFERENCE MATRIB 2011., 29.06-01.07.2011, Vela Luka, Korčula.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Pötschke, Johannes (2014) Potentials of nanostructured WC-Co hardmetal as reference material for Vickers hardness. = Potentials of nanostructured WC-Co hardmetal as reference material for Vickers hardness. International Journal of Refractory Metals and Hard Materials, 50. pp. 126-132. ISSN 0263-4368. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Ćorić, Danko (2016) Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides. = Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides. International journal of refractory metals & hard materials, 54. pp. 82-89. ISSN 0263-4368. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.

Aleksandrov Fabijanić, Tamara and Franz, Mladen and Alar, Željko (2014) Hardness uniformity of vickers hardness blocks for the high hardness range. = Hardness uniformity of vickers hardness blocks for the high hardness range. In: 12th IMEKO TC5 Conference on the Measurement of Hardness 2014, 03-06.02.2014., Cape Town; South Africa.

Aleksandrov Fabijanić, Tamara and Franz, Mladen and Alar, Željko (2016) Influential factors on hardness uniformity of vickers hardness blocks for high hardness range. = Influential factors on hardness uniformity of vickers hardness blocks for high hardness range. Measurement, 78. pp. 358-365. ISSN 0263-2241. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.

Aleksandrov Fabijanić, Tamara and Jakovljević, Suzana and Franz, Mladen and Jeren, Ivan (2016) Influence of grain growth inhibitors and powder size on the properties of ultrafine and nanostructured cemented carbides sintered in hydrogen. = Influence of grain growth inhibitors and powder size on the properties of ultrafine and nanostructured cemented carbides sintered in hydrogen. Metals, 6 (9). ISSN 2075-4701. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Aleksandrov Fabijanić, Tamara and Katić, Marko and Alar, Željko and Menelao, Febo (2015) Comparison of Vickers hardness measurement in high hardness range. = Comparison of Vickers hardness measurement in high hardness range. In: XXI IMEKO World Congress “Measurement in Research and Industry”, 30.8.-4.9.2015., Prag, Češka.

Alerić, Andrija (2018) Eksperimentalno ispitivanje modularne femoralne glave endoproteze zgloba kuka. = Experimental testing of the modular femoral head for hip joint prosthesis. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Alerić, Luka (2016) Stabilnost osteosinteze dorzalnom pločicom na zaključavanje kod prijeloma distalnog radijusa. = Stability of fixation of distal radius fracture using dorsal locking plate. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Alerić, Luka (2018) Utjecaj oblika trupa na dinamičku izdržljivost endoproteze zgloba kuka. = Influence of stem shape on the endurance propreties of hip joint endoprothesis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš and Surjak, Martin.

Alfirević, Ivo (2011) Utjecaj Aristotela i peripatetičke filozofije na razvoj mehanike. = The influence of Aristotle and Peripatetic philosophy in the development of mechanics. In: 4. susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.

Alfirević, Ivo (2013) The story about Danubia Adria 1983 - 2013. = The story about Danubia Adria 1983 - 2013. Hrvatsko društvo za mehaniku, Zagreb, -. ISBN 978-953-7539-18-4

Alfirević, Ivo and Saucha, Juraj and Tonković, Zdenko and Kodvanj, Janoš (2010) Uvod u mehaniku I : Statika krutih tijela. = Introduction to Statics I : Statics of Rigid Bodies. Golden marketing - Tehnička knjiga, Zagreb, -. ISBN 978-953-212-384-5

Alfirević, Ivo and Saucha, Juraj and Tonković, Zdenko and Kodvanj, Janoš (2010) Uvod u mehaniku II : Primjenjena statika. = Introduction to Statics II : Applied Statics. Golden marketing - Tehnička knjiga, Zagreb, -. ISBN 978-953-212-322-5

Alfirević, Ivo and Žeželj, Dragan and Skozrit, Ivica (2015) Smooth Yield Surfaces of Isotropic Materials. = Smooth Yield Surfaces of Isotropic Materials. Transactions of FAMENA, 39 (3). pp. 1-8. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Alujević, Neven and Campillo-Davo, Nuria and Kindt, Peter and Desmet, Wim and Pluymers, Bert and Vercammen, Stijn (2014) Simplified rotating tire models based on cylindrical shells with free boundary conditions. = Simplified rotating tire models based on cylindrical shells with free boundary conditions. In: FISITA 2014 World Automotive Congress, 02.-06.06. 2014., Maastricht, Nizozemska.

Alujević, Neven and Campillo-Davo, Nuria and Kindt, Peter and Desmet, Wim and Pluymers, Bert and Vercammen, Stijn (2014) A simplified model of a rotating tire using cylindrical shells with free ends supported by an elastic foundation. = A simplified model of a rotating tire using cylindrical shells with free ends supported by an elastic foundation. In: International Conference on Noise and Vibration Engineering, 15.-17.09.2014., Leuven, Belgija.

Alujević, Neven and Campillo-Davo, Nuria and Kindt, Peter and Desmet, Wim and Pluymers, Bert and Vercammen, Stijn (2015) A simplified tire model based on a rotating shell. = A simplified tire model based on a rotating shell. In: 4th International Tyre Colloquium, 21-22.04. 2015., Guildford, Velika Britanija.

Alujević, Neven and Tomac, Ivan and Gardonio, Paolo (2010) Theoretical and Experimental Analysis of a Tuneable Vibration Absorber using Acceleration and Displacement Feedback. = Theoretical and Experimental Analysis of a Tuneable Vibration Absorber using Acceleration and Displacement Feedback. In: The 24th International Conference on Noise and Vibration engineering (ISMA2010), 20.-22.09.2010., Leuven, Belgija.

Alujević, Neven and Tomac, Ivan and Gardonio, Paolo (2012) Tuneable Vibration Absorber using Acceleration and Displacement Feedback. = Tuneable Vibration Absorber using Acceleration and Displacement Feedback. Journal of sound and vibration, 331 (12). pp. 2713-2728. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2012). Točan broj autora: 3.

Alujević, Neven and Wolf, Hinko and Depraetere, Bruno and Zhao, Guoying and Domazet, Željko and Pluymers, Bert and Desmet, Wim (2015) Self-tuneable velocity feedback for active isolation of random vibrations in subcritical two degree of freedom systems. = Self-tuneable velocity feedback for active isolation of random vibrations in subcritical two degree of freedom systems. Acta acustica united with acustica, 101 (5). pp. 950-963. ISSN 1610-1928. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 7.

Alujević, Neven and Wolf, Hinko and Gardonio, Paolo (2010) Stability and performance limits for the active vibration isolation on a 2 DOF system using a reactive force actuator and velocity feedback. = Stability and performance limits for the active vibration isolation on a 2 DOF system using a reactive force actuator and velocity feedback. In: International Conference on Noise and Vibration Engineering, 20-22.09.2010., Leuven; Belgium.

Alujević, Neven and Zhao, Guoying and Depraetere, Bruno and Pluymers, Bert and Sas, Paul and Desmet, Wim (2013) ℋ2 optimal vibration control using tuned mass dampers and inertial actuators: comparison of passive and active control effects. = ℋ2 optimal vibration control using tuned mass dampers and inertial actuators: comparison of passive and active control effects. In: AIA-DAGA 2013 Conference on Acoustics, 18.-21.03. 2013., Merano, Italija.

Alujević, Neven and Zhao, Guoying and Depraetere, Bruno and Sas, Paul and Pluymers, Bert and Desmet, Wim (2014) H2 optimal vibration control using inertial actuators and a comparison with tuned mass dampers. = H2 optimal vibration control using inertial actuators and a comparison with tuned mass dampers. Journal of sound and vibration, 333 (18). pp. 4073-4083. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 6.

Ambrušec, Marin (2018) Analiza tragova trošenja cijevi lovačkog oružja. = Analysis of wear tracks of hunting rifle barrel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Anderluh, Robert (2019) Validacija metode uronjene granične površine u numeričkoj mehanici fluida. = Validation of the immersed boundary surface method in computational fluid dynamics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Andreu, Javier Felipe and Schneider, Daniel Rolph and Krajačić, Goran (2015) Evaluation of integration of solar energy into the district heating system of the City of Velika Gorica. = Evaluation of integration of solar energy into the district heating system of the City of Velika Gorica. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Andreu, Javier Felipe and Schneider, Daniel Rolph and Krajačić, Goran (2016) Evaluation of integration of solar energy into the district heating system of the city of Velika Gorica. = Evaluation of integration of solar energy into the district heating system of the city of Velika Gorica. Thermal science, 20 (4). pp. 1049-1060. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.

Andrić, Jerolim and Bičak, Mateja and Kitarović, Stanislav (2014) IACS incremental - iterative method in progressive collapse analysis of various hull girder structures. = IACS incremental - iterative method in progressive collapse analysis of various hull girder structures. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 65 (1). pp. 65-78. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 3.

Andrić, Jerolim and Ehlers, Sören and Rigo, Philippe and Žanić, Vedran (2010) Design of Innovative Ship Concepts Using an Integrated Decision Support System for Ship Production and Operation. = Design of Innovative Ship Concepts Using an Integrated Decision Support System for Ship Production and Operation. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 61 (4). pp. 367-381. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 4.

Andrić, Jerolim and Grgić, Mate and Žanić, Vedran (2010) Structural Optimization of Corrugated Transverse Bulkheads Made of Stainless Steel. = Structural Optimization of Corrugated Transverse Bulkheads Made of Stainless Steel. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 61 (1). pp. 18-27. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Androlić, Marin (2016) Izrada vodilja za sintezu biomaterijala u medicinskim konstrukcijama. = Guidelines creation for synthesis of materials in medical designs. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Androlić, Marin (2018) Konstrukcija sustava za unaprjeđenje treninga s loptom. = The ball training improvement system design. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Anić, Luka and Kasać, Josip and Novaković, Branko (2011) Passive sliding-mode synchronization of multi-robotic systems with structural uncertainties and external disturbances. = Passive sliding-mode synchronization of multi-robotic systems with structural uncertainties and external disturbances. In: The 22nd DAAAM International World Symposium, 23-26.11.2011., Beč, Austrija.

Anić Vučinić, Aleksandra and Vouk, Dražen and Zebić Avdičević, Maja (2010) Structural measures to improve the efficiency of biological wastewater treatment plants. = Structural measures to improve the efficiency of biological wastewater treatment plants. Strojarstvo, 52 (3). pp. 333-342. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Anlar, Dino (2017) Usporedba otpornosti na adhezijsko trošenje prevlaka PVD TiNAlSiN i PACVD TiN na alatnom čeliku za topli rad. = Comparison of resistance to adhesive wear of coatings PVD TiNAlSiN and PACVD TiN on tool for hot work. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Antabak, Anko and Barišić, Branimir and Andabak, Matej and Bradić, Lucija and Brajčinovic, Melita and Haramina, Tatjana and Halužan, Damir and Fuchs, Nino and Ćurković, Selena and Luetić, Tomislav and Šiško, Jerko and Prlić, Ivica (2015) Fizikalna svojstva sadrenih zavoja. = Physical properties of plaster bandages. Liječnički vjesnik, 137 (11/22). pp. 372-376. ISSN 0024-3477. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 12.

Antić, Domagoj (2015) Automatsko niveliranje hidrauličke platforme s dizalicom. = Automatic levelling of a hydraulic platform with crane. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Antić, Domagoj and Lažeta, Zvonimir and Šitum, Željko (2016) Automatic levelling and wireless control of a mobile hydraulic platform with telescopic crane. = Automatic levelling and wireless control of a mobile hydraulic platform with telescopic crane. Ventil, 22 (4). pp. 296-300. ISSN 1318-7279. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Antić, Ivan (2016) Vizijski sustav za prepoznavanje objekata prema boji. = Vision system for object color tracking. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Antolic, Darko (2017) Hibridni alatni strojevi. = Hybrid machine tools. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Antolić, Adrian (2017) Sustav osiguravanja kvalitete pri zavarivanju opreme pod tlakom. = Quality assurance system in welding of pressure equipment. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Antolić, Adrian (2016) Zavarivanje laserom. = Laser welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Antolić, Dražen (2017) Algoritam za tehnološku klasifikaciju na temelju CAD 3D modela izratka. = Algorithm for technological classification based on CAD 3D model of the workpiece. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Antolić, Dražen (2007) Procjena vremena izrade proizvoda regresijskim modelima. = Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Antolković, Ivica (2018) Trošenje alata za izvlačenje elipsi metalnog lima. = Wear of tools for drawing elipsis on metal sheets. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Antolković, Vjeran (2016) Stroj za usitnjavanje biljnih ostataka. = Biomas chipper. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Antolović, Marin (2017) Horizontalno prenosilo za komadni teret. = Horizontal conveyer for piecewise load. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Antonić, Ivana (2015) Analiza toka informacija u razvojnim timovima. = Analysis of the information flow in development teams. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Ančić, Ivica (2016) Energetska učinkovitost i ekološka prihvatljivost brodskih integriranih energetskih sustava. = Energy efficiency and environmental impact of marine integrated power systems. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šestan, Ante.

Ančić, Ivica and Runko Luttenberger, Lidija and Šestan, Ante (2013) The viability of short-sea shipping in Croatia. = The viability of short-sea shipping in Croatia. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (4). pp. 472-481. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

Ančić, Ivica and Šestan, Ante (2016) Definition of Capacity in the EEDI for Ro-Ro Passenger Ships. = Definition of Capacity in the EEDI for Ro-Ro Passenger Ships. In: SNAME Maritime Convention 2016, 01-05.11.2016., Bellevue, Washington, SAD.

Ančić, Ivica and Šestan, Ante (2015) Influence of the required EEDI reduction factor on the CO2 emission from bulk carriers. = Influence of the required EEDI reduction factor on the CO2 emission from bulk carriers. Energy policy, 84. pp. 107-116. ISSN 0301-4215. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 2.

Ančić, Ivica and Šestan, Ante and Virag, Zdravko (2014) Determination of Actual Discharge of High-Pressure Low-Discharge Axial Piston Pumps. = Determination of Actual Discharge of High-Pressure Low-Discharge Axial Piston Pumps. Transactions of FAMENA, 38 (2). pp. 1-10. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2012) EEDI as a design criterion for RO-PAX ships power plant - current status and future challenges. = EEDI as a design criterion for RO-PAX ships power plant - current status and future challenges. In: International Conference on Marine Sciences and Technologies - Black Sea (11 ; 2012), 04.-06.10.2012., Varna, Bugarska.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2013) EEDI calculation for passenger and Ro-Ro passenger ships. = EEDI calculation for passenger and Ro-Ro passenger ships. In: International Conference on Design & Operation of Passenger Ships, 20-21.11.2013., London, Velika Britanija.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2012) EEDI kao mjera energetske učinkovitosti broda. = EEDI as a criterion of ships energy efficiency. In: XX. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 20th symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 27-29.09.2012., Zagreb; Croatia.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2016) Energetske i ekološke značajke suvremenih Ro-Ro putničkih brodova. = Energy and ecological characteristics of modern Ro-Ro passenger ships. In: 22. Simpozij "Teorija i praksa brodogradnje" in memoriam prof. Leopold Sorta (SORTA 2016), 06-08.10.2016., Trogir, Seget Donji.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2015) Influence of the required EEDI reduction factor application on general cargo ships GHG emissions. = Influence of the required EEDI reduction factor application on general cargo ships GHG emissions. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015, 21-24.09.2015., Pula, Hrvatska.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2015) Modification of the EEDI for Ro-Ro passenger ships. = Modification of the EEDI for Ro-Ro passenger ships. In: the World Maritime Technology Conference 2015 (SNAME Maritime Convention), 03-07.11.2015., Providence, Rhode Island, USA.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola and Klisarić, Vedran (2014) Influence of new power sources on the attained EEDI. = Influence of new power sources on the attained EEDI. In: International Conference on Influence of EEDI on Ship Design, 24-25.09.2014., London, UK.

Anđelić, Filip (2019) Dimenzioniranje prednjeg ovjesa trkaceg vozila Lancia Delta Integrale. = Dimensioning of the front suspension of Lancia Delta Integrale race car. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tomić, Rudolf.

Arland, Josip (2016) Analiza naprezanja i deformacija u toplinski opterećenoj štapnoj konstrukciji. = Analysis of stresses and strains in rod structure subjected to thermal load. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Arland, Josip (2017) Numerička analiza progiba zuba polimernog zupčanika. = Numerical analysis of polymer gear tooth deflections. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Avirović, Matija (2019) Projekt grijanja stambene zgrade. = Design of heating system for a residential building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smoljan, Darko.

Azenić, Adam (2016) Implementacija i validacija modela propagiranja zvučnih valova. = Implementation and validation of acoustic wave propagation model. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Ašperger, Danijela and Varga, Ines and Babić, Sandra and Ćurković, Lidija (2014) Adsorption of enrofloxacine on natural zeolite - clinoptilolite. = Adsorption of enrofloxacine on natural zeolite - clinoptilolite. The Holistic Approach to Environment, 4 (1). pp. 3-15. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Ašperger, Danijela and Ćurković, Lidija and Horvat, Alka J.M. and Kaštelan-Macan, Marija (2014) Optimization condition for thin-layer identification of bronzes after anodic sampling. = Optimization condition for thin-layer identification of bronzes after anodic sampling. Journal of Planar Chromatography - Modern TLC, 27 (2). pp. 84-87. ISSN 0933-4173. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.

B

Babak, Tatiana and Khavin, Gennadii and Krajačić, Goran and Duić, Neven (2014) Possibility of heat pump use in central hot water supply system. = Possibility of heat pump use in central hot water supply system. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES Ohrid 2014, 29.06.-03.07.2014., Ohrid, Makedonija.

Babak, Tatyana and Duić, Neven and Khavin, Gennadii and Boldyryev, Stanislav and Krajačić, Goran (2016) Possibility of heat pump use in hot water supply systems. = Possibility of heat pump use in hot water supply systems. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (3). pp. 203-215. ISSN 1848-9257. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Babić, Anita and Cajner, Hrvoje and Šakić, Nikola (2010) Using historical data analysis in problems of mixtures. = Using historical data analysis in problems of mixtures. In: 2nd International Scientific Conference Management of Technology - Step to Sustainable Production, 02-04.06.2010., Rovinj; Croatia.

Babić, Boris (2018) Kočnice teretnog vagona za prijevoz rasutog tereta. = Brakes for bulk load freight car. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Babić, Bruno (2017) Biorazgradiva mrežica za dentalnu medicinu. = Biodegradable membrane for dental medicine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Babić, Bruno (2018) Utjecaj ojačala na svojstva dentalnih akrilata. = Influence of reinforcement on properties of dental acrylic resin. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Babić, Damir (2016) Utjecaj kemijskog sastava čelika na svojstva aluminiziranih slojeva. = Influence of chemical composition of steels on properties of aluminized layers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Babić, Domagoj (2017) Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad. = Abrasion wear testing of TiN/TiCN coatings deposited on high alloyed cold work tool steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Babić, Domagoj (2016) Utjecaj debljine TiCN prevlake na otpornost abrazijskom trošenju visokolegiranih alatnih čelika za hladni rad. = Influence of TiCN coating thickness on abrasion wear resistance of high alloyed cold work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Babić, Milena (2019) Analiza preostale čvrstoće oštećene totalne proteze kuka. = Residual strength assessment of a damaged total hip prosthesis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Božić, Željko.

Babić, Milena (2017) Modeliranje i analiza dinamičke čvrstoće totalne endoproteze zgloba kuka. = Modelling and analysis of fatigue strength of total hip endoprosthesis. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Božić, Željko.

Babić, Nikola (2016) A-TIG zavarivanje duplex čelika. = A-TIG welding of duplex steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Bach, Neven (2014) E-poslovanje i upravljanje znanjem. = E-business and knowledge management. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Bagarić, Dora (2019) Trendovi kod postupaka obrade odvajanjem čestica. = Trends in machining processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Bajac, Jurica (2016) Kotao za centralno grijanje ložen komadnim drvom. = Hot water boiler fired by wood logs. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.

Bajac, Jurica (2018) Numerička analiza strujanja kroz vodeničko kolo. = Numerical analysis of flow through water wheel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Bajs, Marko (2015) Analiza nastanka toplih pukotina pri zavarivanju raznorodnih čelika. = Analysis of hot cracking appearance during welding of dissimilar steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Bakić, Ante and Semenski, Damir and Jecić, Stjepan (2011) Contact caustics measurements expanded to anisotropic materials. = Contact caustics measurements expanded to anisotropic materials. Archives of Civil and Mechanical Engineering, 11 (3). pp. 497-505. ISSN 1644-9665. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 3.

Bakić, Ante and Semenski, Damir and Jecić, Stjepan (2010) Contact caustics measurements expanded to anisotropic materials. = Contact caustics measurements expanded to anisotropic materials. In: 27st Danubia-Adria Symposium on Advances in Experimental Mechanics, 22-25.09.2010., Wroclaw, Poljska.

Bakić, Ante and Semenski, Damir and Jecić, Stjepan (2010) The caustics method in the contact problems of anisotropic materials. = The caustics method in the contact problems of anisotropic materials. In: 14th International Conference on Experimental Mechanics, ICEM 2014, 04-09.07.2010., Poitiers; France.

Baksa, Sarajko (2007) Utvrđivanje individualnih biomehaničkih veličina za prosudbu težine ljudskog rada. = Defining individual biomechanical values for evaluation of difficulty of human labor. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Muftić, Osman.

Balatinec, Luka (2017) Matematički model Bloka K u TETO Zagreb. = Mathematical model of Blok K at TETO Zagreb. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.

Balatinec, Luka (2019) Pregled metode povezivanja rotorske i statorske mreže u proračunskoj mehanici fluida za simulacije turbostrojeva. = An overview of rotor-stator interfaces for computational fluid dynamics simulations in turbomachinery. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Balaton, Antun (2015) Ispitivanje utjecaja prevlačenja PACVD postupkom na promjenu povšinske hrapavosti i topografije površine. = Examination of influence of the PACVD process on surface roughness and surface topography. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Balaton, Antun (2016) Utjecaj usmjerenosti strukture na savojnu čvrstoću drva. = Effect of anisotropy on bending strength of wood. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Baleta, Jakov (2016) Razvoj numeričkih modela u području filma kapljevine na stjenci i Lagrangeovog spreja. = Development of numerical models within the liquid film and Lagrangian spray framework. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Baleta, Jakov and Martinjak, Matija and Vujanović, Milan and Pachler, Klaus and Wang, Jin and Duić, Neven (2017) Numerical analysis of ammonia homogenization for selective catalytic reduction application. = Numerical analysis of ammonia homogenization for selective catalytic reduction application. Journal of environmental management. ISSN 0301-4797. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6. (In Press)

Baleta, Jakov and Mikulčić, Hrvoje and Petranović, Zvonimir and Vujanović, Milan and Duić, Neven (2016) Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. = Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. Energy Conversion and Management, 125. pp. 59-69. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.

Baleta, Jakov and Mikulčić, Hrvoje and Vujanović, Milan (2015) Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. = Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Baleta, Jakov and Pachler, Klaus and Vujanović, Milan and Duić, Neven (2013) Numerical investigation of wallfilm formation for SCR applications. = Numerical investigation of wallfilm formation for SCR applications. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus (2014) Modelling and implementation of surface tension effects into CFD wall film module. = Modelling and implementation of surface tension effects into CFD wall film module. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES Ohrid 2014, 29.06.-03.07.2014., Ohrid, Makedonija.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus (2014) Numerical modelling of film separation in CFD wall film module. = Numerical modelling of film separation in CFD wall film module. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus and Schellander, David (2015) Improvement of the numerical framework for selective catalytic reduction applications. = Improvement of the numerical framework for selective catalytic reduction applications. In: 7th European Combustion Meeting (ECM 2015), 30.03.-02.04.2015., Budimpešta, Mađarska.

Baleta, Jakov and Vujanović, Milan and Melo, Rui (2017) Development and implementation of multicomponent liquid wall film evaporation model for internal combustion engine applications. = Development and implementation of multicomponent liquid wall film evaporation model for internal combustion engine applications. The Holistic Approach to Environment, 7 (1). pp. 15-27. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Baleta, Jakov and Vujanović, Milan and Pachler, Klaus and Wang, Jin (2016) Development and implementation of multicomponent liquid wall film evaporation model. = Development and implementation of multicomponent liquid wall film evaporation model. In: 11th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 04-09.09.2016., Lisabon, Portugal.

Balić, Dražen and Maljković, Danica and Lončar, Dražen (2015) District heating system as a dynamical energy storage – opportunities and limitations. = District heating system as a dynamical energy storage – opportunities and limitations. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09-2.10. 2015., Dubrovnik, Croatia.

Balić, Dražen and Maljković, Danica and Lončar, Dražen and Schneider, Daniel Rolph (2016) Selection of optimal generation set-up considering the socio economic impact. = Selection of optimal generation set-up considering the socio economic impact. In: 11th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 04-09.09.2016., Lisabon, Portugal.

Balog, Martin and Viskić, Joško and Krizik, Peter and Schauperl, Zdravko and Šnajdar, Mateja and Stanec, Zlatko and Ćatić, Amir (2016) CP Ti fabricated by low temperature extrusion of HDH powder: application in dentistry. = CP Ti fabricated by low temperature extrusion of HDH powder: application in dentistry. Key engineering materials, 704. pp. 351-359. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.

Bambir, Krunoslav (2018) Analiza toka snage za novu generaciju električnog vozila proširenog dometa. = Powerflow analysis for new generation of the extended range electric vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.

Ban, Marko and Duić, Neven (2011) Adaptation of n-heptane autoignition tabulation for complex chemistry mechanisms. = Adaptation of n-heptane autoignition tabulation for complex chemistry mechanisms. Thermal Science, 15 (1). pp. 135-144. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 2.

Ban, Marko and Krajačić, Goran and Grozdek, Marino and Ćurko, Tonko and Duić, Neven (2011) The Role of Cool Thermal Energy Storage in Integration of Renewable Energy Sources and Peak Load Reduction. = The Role of Cool Thermal Energy Storage in Integration of Renewable Energy Sources and Peak Load Reduction. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.

Ban, Marko and Perković, Luka and Duić, Neven (2012) Mapping the High Altitude Wind Energy in Southeast Europe. = Mapping the High Altitude Wind Energy in Southeast Europe. In: 7th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2012, 01-06.07.2012., Ohrid, Makedonija.

Ban, Marko and Perković, Luka and Duić, Neven and Penedo, Ricardo (2013) Estimating the spatial distribution of high altitude wind energy potential in Southeast Europe. = Estimating the spatial distribution of high altitude wind energy potential in Southeast Europe. Energy, 57 (1). pp. 24-29. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.

Ban, Michael (2018) Kinematička rekonstrukcija rotacije satelita. = Kinematic reconstruction of satelite rotational motion. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Terze, Zdravko.

Ban, Michael (2016) Oblikovanje postolja za dvoručni robot. = Design of a stand for two-handed robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Barbarić, Marina (2014) Fleksibilno vođenje energetskog sustava. = Flexible operation of energy system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Barbarić, Marina and Guzović, Zvonimir (2016) Optimal design of hydrokinetic turbines for river application. = Optimal design of hydrokinetic turbines for river application. In: 11th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 04-09.09.2016., Lisabon, Portugal.

Barbarić, Marina and Lončar, Dražen (2016) Energy management strategies for combined heat and electric power micro-grid. = Energy management strategies for combined heat and electric power micro-grid. Thermal science, 20 (4). pp. 1091-1103. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 2.

Barbarić, Marina and Lončar, Dražen (2015) Strategies for micro-grid operation in grid-connected mode. = Strategies for micro-grid operation in grid-connected mode. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Barić, Edi-Eduard (2015) Zavarljivost martenzitnog čelika X3CrNiMo13-4. = Weldability of X3CrNiMo13-4 martensitic steel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Barić, Gordana (2010) Plastika i guma - danas i sutra. = Plastics and rubber - today and tomorrow. In: Plastika i guma - danas i sutra, 23.09.2010., Zagreb; Croatia.

Barić, Toni (2015) Sinteza mehanizma za okidanje podvodne puške. = Speargun trigger mechanism synthesis. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Baričević, Jakov (2019) Metoda separacije pogreške vođenja u mjeriteljstvu duljine. = Error separation methods in length metrology. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Katić, Marko.

Baričević, Jakov (2017) Projektiranje sustava elektroničke vage za mjerenje mase košnice. = Design of electronic scale system for beehive mass measurement. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zorc, Davor.

Barišić, Josip (2018) Otpornost na abrazijsko trošenje subfosilnog drva hrasta. = Abrasive wear resistance of subfossil oak wood. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Barišić, Marko (2018) Algebarski pristup identifikaciji parametara autonomnih letjelica u realnom vremenu. = Algebraic approach for real-time parameter identification of unmaned aerial vehicles. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.

Barišić, Marko (2017) Metoda invarijantnih momenata sa primjenom u prepoznavanju oblika. = Method of invariant moments with application in pattern recognition. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.

Barišić, Sandro (2017) Konstrukcija alata za razminiranje. = Design of demining tool. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.

Barišić, Sandro (2015) Konstrukcija oslonca cjevovoda. = Design of pipe support. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Barkaoui, Alae-Eddine and Boldyryev, Stanislav and Duić, Neven and Krajačić, Goran and Guzović, Zvonimir (2015) Appropriate Integration of Geothermal Energy Sources by Pinch Approach: Case Study of Croatia. = Appropriate Integration of Geothermal Energy Sources by Pinch Approach: Case Study of Croatia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.-02.10.2015, Dubrovnik, Croatia.

Barkaoui, Alae-Eddine and Boldyryev, Stanislav and Duić, Neven and Krajačić, Goran and Guzović, Zvonimir (2016) Appropriate integration of geothermal energy sources by Pinch approach : Case study of Croatia. = Appropriate integration of geothermal energy sources by Pinch approach : Case study of Croatia. Applied energy, 184. pp. 1343-1349. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.

Barković, Denis and Kunica, Zoran and Belić, Damir (2017) Sustav za automatsko sortiranje otpada - rješenje za Zagreb? = Automatic waste sorting system - a solution for Zagreb? EGE : energetika, gospodarstvo, ekologija, etika, XXV. (4). pp. 102-105. ISSN 1330-0628. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Barle, Jani and Franulović, Marina and Jurčević Lulić, Tanja and Kladarić, Ivica and Markučič, Damir and Radić, Gojmir (2014) Izrada kataloga znanja, vještina i kompetencija za studije strojarstva u Republici Hrvatskoj. = Development of catalogue of knowledge, skills and competences for mechanical engineering studies in Croatia. In: Međunarodna stručna konferencija ME4CataLOgue, 04-05.12.2014., Slavonski Brod, Hrvatska.

Barlović, Ivan (2019) Analiza proizvodnog procesa komponenti mjernog transformatora. = Analysis of the production process of the instrument transformer. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Hrvoje.

Barta, Marija (2016) Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja. = Optimization of natural organic matter degradation by UV-based processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje and Cajner, Hrvoje.

Barta, Marija (2015) Razgradnja prirodnih organskih tvari u vodi UV/H2O2 postupkom. = Degradation of natural organic matter in water by UV/H2O2 process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.

Barta, Monika (2017) Utjecaj omjera ortodontskog momenta i sile na gibanje zuba kod ortodontske terapije. = Influence of orthodontic moment-to-force ratio on tooth movement in orthodontic treatment. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Bartolec, Bruno (2017) Numerička simulacija strujanja u višestupanjskom aksijalnom kompresoru. = Numerical simulation of the flow in a multi-stage axial compressor. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Bartolin, Ivan (2015) Utjecaj trošenja alata i parametara obrade na raslojavanje pri bušenju kompozitnih materijala. = Influence of tool wear and cutting parameters on delamination at drilling of composite materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Bartulić, Ivan (2016) Točnost i preciznost rezultata dimenzionalnih mjerenja kod primjene računalne tomografije. = Accuracy and precision of dimensional computed tomography. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Baršić, Gorana and Butković, Ivan and Šimunović, Vedran and Katić, Marko (2012) Analysis of dimensional characteristics of the ribs on steel bars for reinforcement of concrete. = Analysis of dimensional characteristics of the ribs on steel bars for reinforcement of concrete. In: 23rd International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Sustainability, 24-27.10.2012., Zadar, Hrvatska.

Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2017) Long term stability of silicon roughness standards. = Long term stability of silicon roughness standards. Precision engineering, 48. pp. 352-356. ISSN 0141-6359. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Baršić, Gorana and Mahović, Sanjin and Katić, Marko and Šimunović, Vedran (2014) Long term stability of silicon roughness standards. = Long term stability of silicon roughness standards. In: 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, 02-06.06.2014., Dubrovnik; Croatia.

Baršić, Gorana and Mahović, Sanjin and Runje, Biserka (2011) Problems in ensuring measurement unity in the field of dimensional nanometrology. = Problems in ensuring measurement unity in the field of dimensional nanometrology. In: 13th International Scientific Conference on Production Engineering CIM, 16-18.06.2011., Biograd, Hrvatska.

Baršić, Gorana and Mudronja, Vedran (2015) Iskustva u akreditaciji Hrvatskog nacionalnog laboratorija za duljinu. = In: 15. Hrvatska konferencija o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.

Baršić, Gorana and Mudronja, Vedran and Katić, Marko and Šimunović, Vedran (2015) Use of statistical tolerances. = Use of statistical tolerances. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015., Vodice, Croatia.

Baršić, Gorana and Runje, Biserka and Šimunović, Vedran (2015) Etalon za nanomjeriteljstvo s višestrukim vrijednostima koraka i brazda. = Nano-calibration standard with multiple pitch and step height values. Tehnički vjesnik – Technical Gazette: Scientific professional Journal of technical faculties of the Josip Juraj Strossmayer University of Osijek., 22 (4). pp. 935-938. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Baršić, Gorana and Šimunović, Vedran and Katić, Marko (2011) Ensuring measurement unity in the field of dimensional nanometrology. = Ensuring measurement unity in the field of dimensional nanometrology. In: 22nd DAAAM World Symposium 2011, 23.26.11.2011., Beč, Austrija.

Baršić, Zdravko and Runje, Biserka and Baršić, Gorana and Belavić, Božidar and Kralj, Hrvoje (2011) Uloga statističkih metoda u ocjenjivanju sukladnosti proizvoda od čelika. = The role of statistical methods of steel products conformity assessment. In: 11. Hrvatska konferencija o kvaliteti i 2. znanstveni skup Hrvatskog društva za kvalitetu, 12-14.05.2011., Vodice, Hrvatska.

Baržić, Iva (2017) Biomehanička analiza volarne pločice na zaključavanje za prijelome distalnog radijusa. = Biomechanical analysis of volar locking plate for distal radius fracture. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Baržić, Iva (2016) Primjena korelacije digitalne slike za in vitro mjerenje pomaka na svježim kostima. = Application of digital image correlation for in vitro displacement measurement on fresh bones. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Basa, Blaženko - Bruno (2017) Automatizacija CAPP podrške u CAD/CAM sustavima. = CAPP automation in CAD/CAM systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Staroveški, Tomislav.

Basa, Blaženko - Bruno (2015) Primjena CAD/CAM sustava u konstrukciji i obradi kućišta motora. = Application of CAD/CAM system in design and machining of motor casing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Batan, Matija (2015) Uređaj za čišćenje snijega na pogon traktorom. = Tractor driven snow cleaning device. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Batas Bjelić, Ilija and Rajaković, Nikola and Krajačić, Goran and Duić, Neven (2014) Valuing the moderation options in Serbia for higher wind penetrations. = Valuing the moderation options in Serbia for higher wind penetrations. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2013) Feasibility of Serbian renewable energy policy in reaching EU2020 goals. = Feasibility of Serbian renewable energy policy in reaching EU2020 goals. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.

Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2013) Increasing wind power penetration into the existing Serbian energy system. = Increasing wind power penetration into the existing Serbian energy system. Energy, 57. pp. 30-37. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.

Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2012) Optimal wind power generation in existing Serbian power system. = Optimal wind power generation in existing Serbian power system. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 1-07.07.2012, Skoplje, Makedonija.

Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2015) A realistic EU vision of a lignite-based energy system in transition: case study of Serbia. = A realistic EU vision of a lignite-based energy system in transition: case study of Serbia. Thermal science, 19 (2). pp. 371-382. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 4.

Batas Bjelić, Ilija and Skokljev, Ivan and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven (2013) Integrating consumer flexibility as virtual storage option in energy system planning. = Integrating consumer flexibility as virtual storage option in energy system planning. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.

Batas Bjelić, Ilija and Skokljev, Ivan and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven (2014) Integrating the flexibility of the average Serbian consumer as a virtual storage option into the planning of energy systems. = Integrating the flexibility of the average Serbian consumer as a virtual storage option into the planning of energy systems. Thermal Science, 18 (3). pp. 743-754. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2014). Točan broj autora: 5.

Batas-Bjelić, Ilija and Rajaković, Nikola and Duić, Neven (2016) Smart municipal energy grid within electricity market. = Smart municipal energy grid within electricity market. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran.

Batas-Bjelić, Ilija and Rajaković, Nikola and Krajačić, Goran and Duić, Neven (2016) Two methods for decreasing the flexibility gap in national energy systems. = Two methods for decreasing the flexibility gap in national energy systems. Energy, 115 (3). pp. 1701-1709. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Batistić, Ivan (2018) Oblikovanje radnog kola i spiralnog kućišta brzohodne radijalne pumpe. = Design of impeler and spiral casing of high specific speed radial pump. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Batistić, Ivan (2016) Proračun koeficijenata otpora i tlaka za optjecanje cilindra podkritičnim Reynoldsovim brojem. = Drag and pressure coefficient for subcritical Reynolds number flow around a cylinder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijašević, Dubravko.

Bauer, Branko and Bušić, Matija (2011) High energy density welding processes. = High energy density welding processes. In: Welding Engineering and Technology. Encyclopedia of Life Support Systems (EOLSS) . Eolss Publishers (under the Auspices of the UNESCO), Oxford, pp. 1-31. ISBN 978-1-905839

Bauer, Branko and Jurica, Maja and Dolinar, Alen and Garašić, Ivica (2016) Utjecaj kemijskog sastava aluminijske legure u lijevanom stanju na kvalitetu spoja zavarenog MIG postupkom. = Influence of chemical composition on the quality of MIG welded As - cast aluminium alloy joint. In: 41. Međunarodna konferencija HDTZ, 8.-11. 06 2016., Opatija, Republika Hrvatska.

Bauer, Branko and Jurica, Maja and Dolinar, Alen and Garašić, Ivica (2016) Utjecaj kemijskog sastava aluminijske legure u lijevanom stanju na kvalitetu spoja zavarenog MIG postupkom. = Influence of Chemical Composition on the Quality of MIG welded As - Cast Aluminium alloy Joint. In: 41. Međunarodna konferencija HDTZ, Zavarivanje - Welding 2016., Opatija, Hrvatska.

Bauer, Branko and Kralj, Slobodan and Bušić, Matija (2013) Production and application of metal foams in casting technology. = Production and application of metal foams in casting technology. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (6). pp. 1095-1102. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Bauer, Branko and Kralj, Slobodan and Kožuh, Zoran and Dorn, Lutz (2011) Effects of type of shielding gas upon local mechanical properties of laser welded joint in heat - treatable steel. = Effects of type of shielding gas upon local mechanical properties of laser welded joint in heat - treatable steel. Materialwissenschaft und Werkstofftechnik, 42 (8). pp. 718-726. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Bauer, Branko and Mahmutović, Almir and Mrvar, Primož (2013) Filling and solidification simulation in hot chamber die casting. = Filling and solidification simulation in hot chamber die casting. In: 14th International Scientific Conference on Production Engineering – CIM 2013, Biograd,, 19-22.06.2013, Biograd, Hrvatska.

Bauer, Branko and Mihalic Pokopec, Ivana (2016) Ljevarstvo i prerada polimera - dio Ljevarstvo. = Casting and polymer processing - part Casting. [Teaching Resource] (Unpublished)

Bauer, Branko and Reminar, Maja Thermal Cutting. = Thermal Cutting. Eolss Publishers. pp. 1-35. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Bauer, Branko and Topić, Angela and Kralj, Slobodan and Kožuh, Zoran (2011) Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel. = Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel. Materiali in tehnologije, 45 (5). pp. 413-419. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Baček, Tomislav and Majetić, Dubravko and Brezak, Danko (2013) Parallel levenberg-marquardt-based neural network with variable decay rate. = Parallel levenberg-marquardt-based neural network with variable decay rate. In: 14th International Scientific Conference on Production Engineering, 19-22.06.2013, Biograd, Hrvatska.

Baček, Tomislav and Majetić, Dubravko and Brezak, Danko and Kasać, Josip (2011) Analysis of iterative learning algorithms for the multilayer perceptron neural network. = Analysis of iterative learning algorithms for the multilayer perceptron neural network. In: The 22nd DAAAM International Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.

Bačelić Medić, Zlatko and Pukšec, Tomislav and Mathiesen, Brian Vad and Duić, Neven (2014) Modelling energy demand of Croatian industry sector. = Modelling energy demand of Croatian industry sector. International Journal of Environment and Sustainable Development, 13 (1). pp. 74-92. ISSN 1474-6778. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Bačelić Medić, Zlatko and Pukšec, Tomislav and Mathiesen, Brian Vad and Duić, Neven (2012) Modelling energy demand of Croatian industry sector. = Modelling energy demand of Croatian industry sector. In: The 7th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 01-07.07.2012., Ohrid, Makedonija.

Bačelić Medić, Zlatko and Ćosić, Boris and Duić, Neven (2013) Sustainability of remote communities: 100% renewable island of Hvar. = Sustainability of remote communities: 100% renewable island of Hvar. Journal of Renewable and Sustainable Energy, 5 (4). ISSN 1941-7012. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

Bačić, Ivana and Otmačić Ćurković, Helena and Ćurković, Lidija (2014) Corrosion behaviour of the yttria stabilized sol - gel ZrO2 thin film on 316L stainless steel. = Corrosion behaviour of the yttria stabilized sol - gel ZrO2 thin film on 316L stainless steel. In: Eurocorr 2014, 08-12.09.2014., Pisa, Italija.

Bađun, Robert (2017) Mehaničko ispitivanje veze izolirane odcjepne stezaljke s električnim vodičem. = Mechanical testing of the connection between insulated branching connector and electrical conductor. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Bađun, Robert (2018) Numerička analiza šasije viličara. = Numerical analysis of forklift chassis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Bašić, Bojan (2016) Karakterozacija vruće valjane okrugle šipke iz čelika 39NiCrMo3. = Characterisation of hot rolled round bar of steel grade 39NiCrMo3. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Bašić, Josip and Degiuli, Nastia and Werner, Andreja (2014) Simulation of water entry and exit of a circular cylinder using the isph method. = Simulation of water entry and exit of a circular cylinder using the isph method. Transactions of FAMENA, 38 (1). pp. 45-62. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Beale, Steven B. and Choi, Hae-Won and Pharoah, Jon and Roth, Helmut and Jasak, Hrvoje and Jeon, Dong Hyup (2016) Open-source computational model of a solid oxide fuel cell. = Open-source computational model of a solid oxide fuel cell. Computer physics communications, 200. pp. 15-26. ISSN 0010-4655. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.

Beaudoin, M. and Nilsson, H. and Page, M. and Jasak, Hrvoje (2014) Evaluation of an improved mixing plane interface for OpenFOAM. = Evaluation of an improved mixing plane interface for OpenFOAM. In: 27th IAHR Symposium on Hydraulic Machinery and Systems, 22-26.09.2014., Montreal, Kanada.

Bedeniković, Zdravko (2017) Razvoj plastične ambalaže za pakiranje medicinskog proizvoda. = Development of plastic packaging for medical product. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Bednjanec, Filip (2016) Umjeravanje uređaja za mjerenje kružnosti. = Calibration of roundness measuring instrument. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Begedin, Tomislav (2016) Preoblikovanje skladišnog sustava proizvodnog pogona. = Reengineering of production company's storage system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Bego, Josip (2017) Uređaj za ispitivanje tarnih ploči suhih spojki. = Test rig for characterization of dry clutch friction plates. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Bego, Josip (2015) Vaga za mjerenje aerodinamičkog opterećenja. = Wind tunnel balance. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Begović, Nezir (2019) Stroj za namatanje plastične folije ili cijevi za navodnjavanje. = Winding machine for plastic foil or irrigation pipes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Belić, Damir and Kunica, Zoran (2014) Development of wheelchair for people with special needs. = Development of wheelchair for people with special needs. In: International Conference "Management of Technology - Step to Sustainable Production" (MOTSP 2014), 11-13.06.2014., Bol, Hrvatska.

Belić, Damir and Kunica, Zoran (2015) A concept of smart wheelchair. = A concept of smart wheelchair. Annals of Faculty of Engineering Hunedoara – International Journal Of Engineering, 13 (1). pp. 37-40. ISSN 1584-2665. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Belić, Damir and Kunica, Zoran and Opetuk, Tihomir and Đukić, Goran (2018) Optimization of the plant layout in the production of the special transformers - case study. = Optimization of the plant layout in the production of the special transformers - case study. FME Transactions, 46 (2). pp. 285-290. ISSN 1451-2092. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Belošević, Andrija (2016) Fizikalno-kemijska svojstva vodorazrjedivog premaza. = Physical and chemical properties of the waterborne coating. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Belošević, Andrija (2018) Ispitivanje zavarenih spojeva računalnom radiografijom. = Weld inspection using computed radiography. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Benc, Martina (2018) Ispitivanje termometrijske komore. = Testing of thermometric chamber. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Benić, Juraj (2015) Izvlačenje strukovnog nazivlja iz strojarskih tekstova. = Extracting the professional terminology from engineering texts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Benić, Juraj and Rajčić, Nikola and Šitum, Željko (2017) Precise force control for hydraulic and pneumatic press system. = Precise force control for hydraulic and pneumatic press system. In: International Conference Fluid Power 2017, 14-15.09.2017., Maribor, Slovenija.

Benjak, Mateja (2017) Karakterizacija tankih tvrdih prevlaka na bazi titanija. = Characterization of hard thin Ti-coatings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Benjak, Mateja (2016) Trošenje noža za kosilicu. = Wear of lawn mover blades. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Benković, Tomislav (2017) Elektrokemijska oksidacija aluminija. = Electrochemical oxidation of aluminium. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna and Kurtela, Marin.

Benković, Tomislav (2016) Utjecaj temperature medija na iniciranje rupičaste korozije Cr-Ni čelika. = Influence of solution temperature on initiation of stainless steel pitting corrosion. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.

Bergman Gašparić, Lana and Schauperl, Zdravko and Mehulić, Ketij (2013) Utjecaj obrade površine cirkonijevog oksida prije nanošenja obložne keramike na veznu čvrstoću. = Shear bond strength in zirconia Veneered Ceramics using two different surface treatments prior veneering. Collegium antropologicum, 37 (1). pp. 121-125. ISSN 0350-6134. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

Berković-Šubić, Mihaela (2014) Primjena infracrvene termografije kod mehaničkog ispitivanja materijala. = Application of infrared thermography to mechanical testing of materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Boras, Ivanka and Tonković, Zdenko.

Berković-Šubić, Mihaela and Boras, Ivanka and Frančeski, Joško and Kodvanj, Janoš and Rodić, Alan and Švaić, Srećko and Tonković, Zdenko (2015) Application of IR Thermography for Determination of Material Properties. = Application of IR Thermography for Determination of Material Properties. In: QIRT-Asia 2015 Conference on Quantitative InfraRed Thermography, 6.-10.07.2015., Mahabalipuram, Indija.

Bernardić, Makso (2014) Obrada otpadne vode iz procesa mercerizacije. = Treatment of mercerization wastewater. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.

Bernat, Domagoj (2019) Regulacija protoka napojne vode. = Feedwater flow control. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Bernat, Marija (2015) Protetski nadomjesci za pse. = Prosthetic replacement for dogs. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Bertović, Iva (2019) Studija slučaja primjene dizalice topline morska voda - voda na postojećoj zgradi javne namjene. = Case study of the heat pump utilization on an existing public building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Bertović, Iva (2017) Zagrijavanje zraka u lamelnim izmjenjivačima topline. = Air heating in finned tube heat exchangers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ferdelji, Nenad.

Bečirović, Tomislav (2012) Učinak i mehanizam usitnjavanja zrna aluminijskih legura. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Bešenić, Tibor and Vujanović, Milan and Petranović, Zvonimir and Mikulčić, Hrvoje and Duić, Neven (2017) Numerical Simulation of Solid Fuel Combustion. = Numerical Simulation of Solid Fuel Combustion. In: 8th European Combustion Meeting (ECM 2017), 18-21.04.2017., Dubrovnik, Republika Hrvatska.

Bešić, Sara (2019) Identifikacija dinamike laboratorijske grijalice zraka primjenom umjetne neuronske mreže. = System identification of laboratory fan heater using artificial neural network. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.

Bešlić, Josip (2015) Stroj za punjenje vina u boce. = Wine filling machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Beštak, Franjo (2015) Održavanje rotacijske opreme primjenom termografije. = Maintenance of rotating equipment using thermography. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Beštak, Franjo (2016) Primjena balansiranja i centriranja u održavanju rotacijskih strojeva. = Application of balancing and centering in maintenance of rotating machines. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Bila, Filip (2016) Primjena vakuumske membrane pri obradi otpadne vode tekstilne industrije. = Application of vacuum membrane in the treatment of textile wastewater. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.

Bilić, Dujo (2019) Konstruiranje kučišta čitača QR koda za aditivnu proizvodnju. = Design of QR code scanner for additive manufacturing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Bilić, Lovro (2018) Priprema i karakterizacija Charpyjevih ispitnih uzoraka s V-zarezom za indirektnu provjeru uređaja. = Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

Biloš, Josip (2019) Ispitivanje termometrijske peći. = Testing of thermometric furnaces. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor and Šestan, Danijel.

Biluš, Luka (2019) Procjena kvarova ležajeva primjenom strojnog učenja. = Machine learning based bearing fault diagnosis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Biluš, Luka (2017) Umjeravanje uređaja za mjerenje dužina. = Calibration of length measuring machine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Bilušić, Martin and Runje, Biserka (2016) Traceability assurance in optical 3D metrology. = Traceability assurance in optical 3D metrology. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.

Bister, Ivan (2015) Poboljšavanje proizvodnih procesa. = Improving of production processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Biškup, Davor (2019) Idejno rješenje optimizacije broja faza kod štancanja. = Conceptual solution for optimizing the number of phases in die cutting. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Keran, Zdenka.

Bišćan, Davor and Lončar, Dražen (2010) Optimization of waste heat utilization in gas turbine pipeline compressor station. = Optimization of waste heat utilization in gas turbine pipeline compressor station. Strojarstvo, 52 (4). pp. 475-487. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 2.

Bišćan, Petar (2013) Testiranje graničnih opterećenja i funkcionalnosti sustava kontrole zrakoplova AC4. = AC4 airplane control system limit load and operation certification tests. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žanić, Vedran.

Blagojević, Branko and Žiha, Kalman (2012) Kriteriji robustnosti za povećanje sigurnosti sastavnica brodskih konstrukcija. = Robustness Criteria for Safety Enhancement of Ship’s Structural Components. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 63 (1). pp. 11-17. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 2.

Blagojević, Ivan and Ivanović, Gradimir and Janković, Slobodan and Popović, Vladimir (2012) A model for gear shifting optimization in motor vehicles. = A model for gear shifting optimization in motor vehicles. Transactions of FAMENA, 36 (2). pp. 51-66. ISSN 1333-1124. . .

Blašković, Marko (2016) Utjecaj položaja bravice ortodontskog aparata na naprezanje u jednokorijenskom zubu. = Stress influence of fixed orthodontic device bracket on single root tooth. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Blašković, Valentino (2016) Sustav leteće kamere za konstrukcijski studio. = Design observatory flying camera support. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Blažević, Nikola (2016) Izrada modularnog 3D pisača. = Development of a modular 3D printer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.

Blažić, Mislav (2016) Ispitivanje i analiza značajki rada dvo-gorivnog motora. = Testing and performance analysis of dual fuel engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Blažun, Antonio (2019) Teleskopska auto košara. = Telescopic cherry picker. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Hoić, Matija.

Boban, Luka and Lepoša, Leon and Soldo, Vladimir and Grozdek, Marino (2015) Influence of Groundwater Flow on Implementation of Distributed Thermal Response Test. = Influence of Groundwater Flow on Implementation of Distributed Thermal Response Test. In: 24th IIR International Congress of Refrigeration (ICR2015), 16-22.08.2015., Yokohoma.

Boban, Luka and Soldo, Vladimir and Mandić, Marko (2016) Borehole temperature distribution during Thermal Response Test. = Borehole temperature distribution during Thermal Response Test. In: Energija i okoliš 2016., 26.-28.10.2016., Opatija, Hrvatska.

Bobetić, Marko (2018) Definiranje rute za određivanje emisija štetnih tvari vozila u stvarnim uvjetima vožnje. = Route definition for determination of vehicle emissions under real driving conditions. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šagi, Goran.

Bobetić, Marko (2016) Prerada serijskog osobnog automobila za automobilsko natjecanje drift. = Conversion of serial personal vehicle into drift competition vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran and Ormuž, Krunoslav.

Bodrušić, Toni (2016) Rekonstrukcija analizatora ispušnih plinova. = Retrofit of exhaust gas analyser. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Bogdan, Željko (2011) Analysis of Reheater Size Impact on Power Plant Performance. = Analysis of Reheater Size Impact on Power Plant Performance. In: 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT, 11-13.07.2011., Pointe Aux Piments, Mauritius.

Bogdanić, Dino (2015) Ispitivanje otpornosti na abrazijsko trošenje tvrdih prevlaka proizvedenih PACVD postupkom. = Abrasion wear testing of hard coatings produced by PACVD process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Bogdanić, Dino (2017) Utjecaj postupka prevlačenja na integritet površine Ti6Al4V legure za primjenu u medicini. = Effect of coating processes on the surface integrity of Ti6Al4V alloy for use in medicine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Bogdanić, Dino and Landek, Darko (2016) Povećanje otpornosti na abrazijsko trošenje primjenom tvrdih PACVD prevlaka. = Improvement of abrasion wear resistance by using hard PACVD coating. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.

Bogdanović, Drago (2015) Stroj za dobavu segmentiranih svrdla u postupku bušenja rudarskog okna. = Machine for feeding segmented drills in the drilling processfor mine shaft. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Bogut, Nikola (2017) Određivanje in vivo mehaničkih svojstava ljudske kože. = Determination in vivo of the mechanical properties of human skin. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Bojkovski, Jovan and Arifović, Narcisa and Kartal Dogan, Aliye and Kalemci, Murat and Petruševa, Olgica and Simić, Slavica and Veliki, Tomislav and Zvizdić, Davor and Drnovšek, Janko (2013) Comparison of the Realizations of the ITS-90 over the Range from 83.8058 K to 692.677 K. = Comparison of the Realizations of the ITS-90 over the Range from 83.8058 K to 692.677 K. In: Ninth International Temperature Symposium (ITS9), 19.3.2013. do 23.3.2013., Los Angeles, Sjedinjene Američke Države.

Bojkovski, Jovan and Veliki, Tomislav and Drnovšek, Janko and Zvizdić, Davor (2011) Bilateral Comparison of Mercury and Gallium Fixed-Point Cells Using Standard Platinum Resistance Thermometer. = Bilateral Comparison of Mercury and Gallium Fixed-Point Cells Using Standard Platinum Resistance Thermometer. International journal of thermophysics, 32 (7). pp. 1544-1552. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 4.

Bojčetić, Nenad and Salopek, Damir and Marjanović, Dorian (2015) PLM implementation: case study. = PLM implementation: case study. In: 20th International Conference on Engineering Design (ICED 2015), 07.2015, Milano, Italija.

Bolanča, Antonijo (2016) Osiguravanje kvalitete izgradnje i održavanja plinskog transportnog sustava. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.

Boldyryev, Stanislav and Krajačić, Goran (2015) Targeting of Trade-Off for Total Site Heat Recovery. = Targeting of Trade-Off for Total Site Heat Recovery. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09-2.10.2015, Dubrovnik, Croatia.

Boldyryev, Stanislav and Krajačić, Goran and Duić, Neven (2016) Cost Effective Heat Exchangers Network of Total Site Heat Integration. = Cost Effective Heat Exchangers Network of Total Site Heat Integration. In: PRES 2016, 27-31.08.2016., Prag, Češka.

Boldyryev, Stanislav and Krajačić, Goran and Duić, Neven and Novosel, Tomislav (2015) Contributing global CO2 mitigation by utilisation of food industry heat into smart Croatian DHS via Total Site heat recovery. = Contributing global CO2 mitigation by utilisation of food industry heat into smart Croatian DHS via Total Site heat recovery. In: International Conference on Smart Energy Systems and 4th Generation District Heating, 25-26.08.2015, Copenhagen, Denmark.

Boldyryev, Stanislav and Krajačić, Goran and Duić, Neven and Varbanov, Petar (2015) Cost Minimisation for Total Site Heat Recovery. = Cost Minimisation for Total Site Heat Recovery. Chemical Engineering Transactions, 45. pp. 157-162. ISSN 2283-9216. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Boldyryev, Stanislav and Mikulčić, Hrvoje and Krajačić, Goran and Duić, Neven (2016) Waste heat utilisation of Croatian cement industry accounting Total Site demands. = Waste heat utilisation of Croatian cement industry accounting Total Site demands. Computer Aided Chemical Engineering, 38. pp. 2223-2228. ISSN 1570-7946. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Boldyryev, Stanislav and Mikulčić, Hrvoje and Mohorović, Zoran and Vujanović, Milan and Krajačić, Goran (2015) Heat Recovery and CHP Approach for Site of Cement Plant. = Heat Recovery and CHP Approach for Site of Cement Plant. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Boldyryev, Stanislav and Mikulčić, Hrvoje and Mohorović, Zoran and Vujanović, Milan and Krajačić, Goran and Duić, Neven (2016) The improved heat integration of cement production under limited process conditions: A case study for Croatia. = The improved heat integration of cement production under limited process conditions: A case study for Croatia. Applied thermal engineering, 105. pp. 839-848. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.

Boldyryev, Stanislav and Ćosić, Boris and Krajačić, Goran and Dominković, Dominic and Štefanec, Kristjan and Duić, Neven (2015) Pollution reduction in Croatian food industry via Total Site heat recovery. = Pollution reduction in Croatian food industry via Total Site heat recovery. In: 4th International Conference on Sustainability Science and Engineering, 26-29.05.2015, Balatonfured, Hungary.

Bolkovac, Josip (2018) Brzinomjer i putomjer za bicikl. = Bicycle speedometer and odometer. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Bonačić, Filip (2014) Analiza zamora krajnje polne ploče sinkronog hidrogeneratora. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Bonačić Bartolin, Petra and Lulić, Zoran (2016) A vehicle emissions and air quality in Zagreb and Koromačno, Croatia. = A vehicle emissions and air quality in Zagreb and Koromačno, Croatia. In: 4th International Symposium on Environmental Management - Towards Circular Economy, 7.-9.12.2016., Zagreb, Hrvatska.

Borovnik, Nikola (2018) Indirektno zagrijavanje zraka pomoću otpadne topline dimnih plinova. = Air heating in indirect waste heat recovery system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ferdelji, Nenad.

Boršić, Saša (2015) Utjecaj debljine prevlake na mehanička svojstva polimerne tvorevine. = Influence of coating thickness on the mechanical properties of polymer product. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Bosak, Matija (2015) Traktorski priključak za međuredno kopanje. = Agricultural vehicle extension for in-between rows cultivating. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Bosnar, Danijel (2016) Analiza Koanda strujanja oko kružnog cilindra. = Analysis of Coanda Jet Flow around a Circular Cylinder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.

Bosnar, Danijel (2018) Numerička simulacija dinamike mahokrila. = Numerical simulation of flapping wing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Terze, Zdravko.

Bosnar, Mario (2017) Projektiranje i izvedba kvadkoptera. = Design and realization of quadrocopter. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Botica, Marko (2016) CMMS sustavi u održavanju zgrada. = CMMS systems in building maintenance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Botica, Marko (2015) Digitalizacija energetskih instalacija sjeverne zgrade fakulteta strojarstva i brodogradnje. = Digitalization of north building energy installation of faculty of mechanical engineering. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Botić, Slaven (2016) Utjecaj hrapavosti površine na prionjivost PACVD prevlake na tvrdim metalima. = Influence of the surface roughness on the adhesion of PACVD coating on hardmetals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Boutanios, Ziad (2018) Dvosmjerno spregnuta Euler-Eulerova simulacija nošenja snijega metodom kontrolnih volumena. = Two-way coupled Eulerian-Eulerian finite volume simulation of drifting snow. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Boutanious, Ziad and Jasak, Hrvoje (2015) Viscous Treatment of the Snow Phase in Eulerian-Eulerian Simulations of Drifting Snow. = Viscous Treatment of the Snow Phase in Eulerian-Eulerian Simulations of Drifting Snow. In: 14th International Conference on Wind Engineering, 21.-26.6.2015., Porto Allegre, Brazil.

Bošković, Fran (2016) Virtualna elektrana za energetski samodostatne otoke. = Virtual power plant for energy self-sufficient islands. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.

Bošković, Tomislav (2014) Mapiranje proizvodnih procesa poduzeća. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Bošnjaković, Alen and Memić, Haris and Grgec Bermanec, Lovorka and Džemić, Zijad (2016) Implementation of requirements of standard ISO/IEC 17020 in authorized bodies for verification of measuring instruments risk analysis. = Implementation of requirements of standard ISO/IEC 17020 in authorized bodies for verification of measuring instruments risk analysis. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.

Bošnjaković, Alen and Runje, Biserka and Bašić, Hazim and Softić, Almira (2015) The characteristics of quality management system in inspection bodies in accordance with the International Standard ISO/IEC 17020:2012. = The characteristics of quality management system in inspection bodies in accordance with the International Standard ISO/IEC 17020:2012. In: Quality 2015, 10-13.07.2015., Neum, Bosna i Hercegovina.

Božić, Matej (2018) Konstrukcija i vođenje CNC glodalice. = Design and control of CNC milling machine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Božić, Mladen (2018) Utjecaj povrata ispušnih plinova na pojavu detonantnoga izgaranja u suvremenim Ottovim motorima. = Influence of the exhaust gas recirculation on the occurrence of knock in modern SI engines. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Božić, Mladen and Ilinčić, Petar and Lulić, Zoran and Vučetić, Ante (2014) Retrofit of a roller brake tester at FAMENA. = Retrofit of a roller brake tester at FAMENA. Transactions of FAMENA, 38 (3). pp. 95-102. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 4.

Božić, Mladen and Vučetić, Ante and Ilinčić, Petar and Kozarac, Darko and Lulić, Zoran (2015) Research Testbed for HCCI Engine. = Research Testbed for HCCI Engine. In: The 25th JUMV International Automotive Conference “Science and Motor Vehicles 2015″, 14-15.04.2015, Beograd, Srbija.

Božić, Mladen and Vučetić, Ante and Ilinčić, Petar and Lulić, Zoran (2013) Monitoring and Regulation of Vehicle Brake Tester. = Monitoring and Regulation of Vehicle Brake Tester. In: XXIV International Automotive Conference “Science and Motor Vehicles 2013, 23.-24.04.2013, Beograd, Srbija.

Božić, Petra (2018) Kvantificiranje utjecaja na okoliš povezanih s vodom pomoću koncepta vodnog otiska. = Quantification of potential environmental impacts related to water by the concept of water footprint. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Božić, Tomislav (2016) Standardizacija procesa ispitivanja ispravnosti rada transformatora. = The processes standardization of examining validity of transformers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Božić, Željko and Bitunjac, Vedran and Semenski, Damir (2010) Interaction modelling of multiple fatigue cracks in stiffened panels. = Interaction modelling of multiple fatigue cracks in stiffened panels. Transactions of FAMENA, 34 (4). pp. 11-18. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Božić, Željko and Parunov, Joško and Fadljevic, Marko (2010) Fatigue crack propagation in stiffened panels under tension loading. = Fatigue crack propagation in stiffened panels under tension loading. In: International Workshop "Advanced Ship Design for Pollution Prevention", ASDEPP 2010, 23-24.11.2009., Split; Croatia.

Božić, Željko and Schmauder, Siegfried and Mlikota, Marijo and Hummel, Martin (2014) Multiscale fatigue crack growth modelling for welded stiffened panels. = Multiscale fatigue crack growth modelling for welded stiffened panels. Fatigue and Fracture of Engineering Materials and Structures, 37 (9). pp. 1043-1054. ISSN 8756-758X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.

Božić, Željko and Schmauder, Siegfried and Wolf, Hinko (2013) The Influence of Residual Stresses on Fatigue Crack Growth Rate in Stiffened Panels. = The Influence of Residual Stresses on Fatigue Crack Growth Rate in Stiffened Panels. In: 2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, 11-14. 06. 2013., Dubrovnik-Cavtat, Croatia.

Božić, Željko and Semenski, Damir and Wolf, Hinko (2013) Fracture analysis of plates under lateral load pressure. = Fracture analysis of plates under lateral load pressure. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25-28. 09. 2013., Primošten, Croatia.

Božić, Željko and Vujica, Danijel and Braut, Sanjin (2010) Utjecaj sekundarnog savijanja na rast pukotina u orebrenim panelima. = Effect of secondary bending on fatigue crack growth in stiffened panels. Engineering review, 30 (1). pp. 13-21. ISSN 1330-9587. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Božić, Željko and Wolf, Hinko and Semenski, Damir (2010) Growth of multiple fatigue cracks in plates under cyclic tension. = Growth of multiple fatigue cracks in plates under cyclic tension. Transactions of FAMENA, 34 (1). pp. 1-12. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Božulić, Matej (2017) Goriva i maziva u avijaciji. = Aviation fuels and lubricants. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Brajković, Josip (2018) Projekt grijanja, hlađenja i ventilacije obiteljske kuće s otvorenim bazenom. = Design of heating and ventilation system for a family house with open pool. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smoljan, Darko.

Brajković, Tomislav and Juraga, Ivan and Šimunović, Vinko (2013) Influence of surface treatment on corrosion resistance of cr-ni steel. = Influence of surface treatment on corrosion resistance of cr-ni steel. Engineering Review, 33 (2). pp. 129-134. ISSN 1330-9587. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Bralić, Krešimir (2014) Protupotlačni sigurnosni ventil na vrećastom filtru. = Low pressure preventing valve on a baghouse filter. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ruševljan, Miroslav and Tuković, Željko.

Bralić, Svemir (2003) Analiza podobnosti orebrene tankostjene konstrukcije. = Adequacy analysis of stiffened thin walled structures. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žanić, Vedran.

Bratić, Robert (2014) Konstrukcija naprave za vježbanje mišića ramenog zgloba. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Bratić, Silvio (2010) Usporedna dva zadana načina gradnje odabrane tipske zgrade za područje kontinentalne Hrvatske. = A comparison of two given building scenarios for a typical building in continental Croatia. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven and Balen, Igor.

Braun, Teo (2016) Informacijski sustav umjeravanja etalona duljine. = Gauge block calibration information system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Braun, Teo (2015) Izrada web aplikacije za analizu rezultata usporedbenih mjerenja etalona duljine. = Web application for analysis of length standards measurement results obtained by differential method. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Brcko, Božidar (2012) Modifikacija eutektičkog silicija u Al-Si legurama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Brezak, Danko and Majetić, Dubravko and Udiljak, Toma and Kasać, Josip (2010) Flank wear regulation using artificial neural networks. = Flank wear regulation using artificial neural networks. Journal of Mechanical Science and Technology, 24 (5). pp. 1041-1052. ISSN 1738-494X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2010). Točan broj autora: 4.

Brezak, Danko and Majetić, Dubravko and Udiljak, Toma and Staroveški, Tomislav (2010) Filtration of estimated flank wear widths using recurrent neural network in the tool wear regulation process. = Filtration of estimated flank wear widths using recurrent neural network in the tool wear regulation process. In: CIRP ICME ’10 - 7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 23-25.06.2010., Capri, Italy.

Brezak, Danko and Staroveški, Tomislav and Stiperski, Ivan and Klaić, Miho and Majetić, Dubravko (2015) Artificial neural network model for tool condition monitoring in stone drilling. = Artificial neural network model for tool condition monitoring in stone drilling. Applied Mechanics and Materials, 772. pp. 268-273. ISSN 1660-9336. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Brezak, Hrvoje (2017) Robusno upravljanje autonomnom letjelicom s četiri rotora. = Robust control of unmanned aerial vehicle with four rotors. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.

Brezetić, Dominik (2019) Buka i vibracije namota energetskog transformatora. = Noise and vibrations of power transformer windings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.

Brezetić, Dominik (2017) Kinematska analiza prostornog slučaja mehanizma s dva kardanska zgloba. = Kinematic analysis of spatial arrangement of a double cardan joint mechanism. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Brezinščak, Tin (2019) Konstrukcija mehanizma dvočeljusne bubanjske kočnice. = Design of dual caliper drum brake mechanism. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.

Breški, Leo (2010) Uređaj za prikupljanje i hermetičko pakiranje bolničkog i kućnog otpada. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario and Rhode, Danijel.

Breški, Mario (2018) Mrežno upravljanje pokretnim laboratorijskim objektima. = Network control of mobile laboratory objects. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Breški, Tomislav (2016) Analiza naprezanja i deformacija u toplinski opterećenoj konstrukciji. = Analysis of stresses and strains in construction subjected to thermal load. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Breški, Tomislav (2018) Programska podrška izradi izvješća sa sastanka projektnog tima. = Software support for preparing reports from the project team meeting. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Briševac, Debora (2018) Karakterizacija Al2O3 suspenzija stabiliziranih polielektrolitnim disperzantom. = Characterization of Al2O3 suspensions stabilized with polyelectrolyte dispersant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Brkić, Antonio (2017) Simulacija i analiza dinamike promjene stupnja prijenosa automatskog mjenjača u AVL CRUISE okruženju. = Simulation and analysis of automatic transmission shift dynamics within the AVL CRUISE environment. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Brnadić, Tomislav (2011) Primjena načela vitkog održavanja za benzinske postaje. = Applying the principles of slender maintaining for petrol stations. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Brozović, Stjepan (2017) Iskustvene spoznaje primjene vertikalnih podiznih modula. = Empirical findings of the application of vertical lift modules. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Brozović, Stjepan (2016) Primjena koncepta održive proizvodnje u proizvodnji električnog vozila. = Implementation of the sustainable manufacturing in production of the electric vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Brumen, Dominik (2019) Koncept uvođenja 6 sigma metodologije u poduzeće Feroimpex d.o.o. = The concept of implementation of six sigma methodology in Feroimpex d.o.o. company. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Hrvoje.

Bruno, Čok (2017) Razvoj niskobudžetnog 3D pisača. = Development of low-budget 3D printer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Brzica, Karlo (2019) 3D rotacijski skener. = 3D rotating scanner. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Brčić, Ante (2015) Traktorska prikolica za gašenje požara. = Tractor firefighting trailer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Bubalo, Luka (2017) Dijagnostika ultrazvukom. = Ultrasound diagnostics. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Budim, Antonio (2018) Utjecaj parametara nagrizanja na promjenu hrapavosti površine medicinskih legura. = The influence of etching parameters on the roughness changes of the surfaces of medical alloys. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Budim, Antonio (2016) Utjecaj stanja površine na korozijsku postojanost nehrđajućeg dupleks čeličnog lijeva. = Effects of surface state on the corrosion resistance of a cast duplex stainless steel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Budim, Robert (2015) Nehrđajući čelici u farmaceutskoj industriji. = Stainless steels in the pharmaceutical industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Budim, Ružica (2018) Analiza osjetljivosti energijskih simulacija stambene zgrade. = Sesitivity Analysis of Residential Building Energy Simulations. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žakula, Tea.

Budimir, Marko (2015) Primjena alata kontrole kvalitete u praćenju procesa proizvodnje nareznog prstena. = Application of quality control tools in monitoring cutting ring production process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Budinjaš, Dino (2018) Usporedba postojećeg radnog mjesta s budućim predloženim automatiziranim rješenjem. = Comparison of an existing workstation with future suggested automated workstation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Hrvoje.

Budić, Ivan and Novoselović, Daniel and Bauer, Branko and Mance, Ines (2010) Određivanje zaostalih naprezanja u rešetkastoj probi. = Determination of residual stresses in stress lattice. In: 2nd International conference VALLIS AUREA Focus on: Regional development, 03.09.2010., Požega; Croatia.

Budić, Roko (2016) Mjerenje brzine i protoka zraka pomoću Prandtl-Pitotove cijevi. = Air velocity and flow measurements using Prandtl type Pitot tube. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Budić, Roko (2018) Utjecaj regenerativnog zagrijavanja na pogonsku fleksibilnost. = Impact of regenerative preheating on operating flexibility. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Bukovac, Luka (2018) Aluminijski kompozitni materijali u suvremenoj automobilskoj industriji. = Aluminium matrix composites in modern automotive industry. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Buković, Goran (2018) Prijedlog konstrukcije naprave za vježbanje mišića gluteusa. = The design proposal of gluteus muscle physical training device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Bulat, Petar (2017) Nadogradnja jednoosnog mjernog uređaja laserskim interferometrom. = Retrofitting 1D measurement machine with laser interferometer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Katić, Marko.

Bulat, Petar (2015) Sustav za umjeravanje mjerila relativne vlažnosti. = System for calibration of relative humidity meters. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Buljac, Andrija (2014) Utjecaj vozila i ograde na aeroelastične karakteristike sekcije mosta. = Effects of vehicles and railings on aeroelastic behavior of bridge deck. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje and Pospišil, Stanislav.

Bunjevac, Marko (2019) Utjecaj načina vožnje na eksploatacijske parametre vozila. = Driving style influence on Vehicle Exploitation Parameters. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Buntak, Branimir (2018) Projektiranje sustava za proizvodnju plastičnih ambalažnih kutija. = Design of a system for manufacturing plastic packaging boxes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Buntić, Matej (2017) Usporedba rada motora s niskotlačnim i visokotlačnim EGR sustavom. = Comparison of performance of engine with low pressure and high pressure EGR system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Burek, Valentin and Jurić, Ivan and Dović, Damir (2011) Termografsko snimanje vrećastog distributera zraka. = Thermographic measurements of the air bag distributor. In: Interklima '11, 21 Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 10. Konferencija o termografiji,, 07.-08.04.2011., Zagreb, Hrvatska.

Burić, Ivan (2016) Dimenzoniranje sustava za proizvodnju električne energije iz visinskih vjetrova baziranog na Magnusovom efektu. = Dimensioning of a system for power production from high altitude winds based on Magnus' effect. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Burčul, Mihovil (2018) Stabilizacija Al2O3 suspenzija limunskom kiselinom. = Stabilization of Al2O3 suspensions with citric acid. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Butković, Daniel (2018) Proizvodnja alata za tlačno lijevanje aluminija. = Tool production for die casting of aluminum. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Butković, Daniel (2016) Računalna tomografija u dimenzionalnom mjeriteljstvu potpomognuta simulacijama. = Simulation-aided computed tomography for dimensional measurements. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Buzjak, Domagoj (2017) Prema imerzivnom projektiranju proizvodnih procesa korištenjem tehnika virtualne stvarnosti. = Towards immersive designing of production processes using virtual reality techniques. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Buzjak, Domagoj (2016) Virtualna stvarnost i njezine primjene. = Virtual reality and its applications. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Buzjak, Dražen (2016) Upravljačka jedinica makete dizala. = Control unit for model of elevator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Bušić, Dino (2015) Prikaz i analiza skladišnog sustava poduzeća Monting d.o.o. = Review and analysis of warehouse system of Monting d.o.o. company. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Bušić, Matija (2015) Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom. = Friction stir welding of aluminium foam sandwich panels. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran and Klobčar, Damjan.

Bušić, Matija and Garašić, Ivica and Kožuh, Zoran and Dolić, Natalija (2016) Analiza zavarenih spojeva izvedenih bazičnom dvostruko obloženom elektrodom. = Analysis of welded joints produced with basic double coated electrode. In: Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.

Bušić, Matija and Kožuh, Zoran and Klobčar, Damjan and Samardžić, Ivan (2016) Friction stir welding (FSW) of aluminium foam sandwich panels. = Friction stir welding (FSW) of aluminium foam sandwich panels. Metalurgija, 55 (3). pp. 473-476. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.

Bušić, Matija and Kožuh, Zoran and Klobčar, Damjan and Surjak, Martin (2016) Friction stir welding of 1,5 mm thin sheets of en aw 6063-t4 aluminium alloy using tool with simplified geometry. = Friction stir welding of 1,5 mm thin sheets of en aw 6063-t4 aluminium alloy using tool with simplified geometry. In: Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.

C

Caiazzo, Anna and Alujević, Neven and Pluymers, Bert and Desmet, Wim (2016) Active control of turbulent boundary layer sound transmission into a vehicle interior. = Active control of turbulent boundary layer sound transmission into a vehicle interior. Journal of Physics: Conference Series, 744 (1). pp. 1-13. ISSN 1742-6596. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Cajner, Franjo and Kovačić, Saša and Kumić, Ivan and Cajner, Hrvoje (2013) The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. = The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11.-14.06.2013., Zagreb, Hrvatska.

Cajner, Franjo and Kovačić, Saša and Rafael, Hrvoje and Vugrinčić, Amalija and Šimunović, Vinko (2013) Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. = Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. In: 2nd Mediterranean Conference on Heat Treatment and Surface Engineering & Challenges for Heat Treatment and Surface Engineering, 11-14.06.2013, Cavtat, Hrvatska.

Cajner, Franjo and Kovačić, Saša and Rafael, Hrvoje and Vugrinčić, Amalija and Šimunović, Vinko and Gržeta, Biserka (2015) Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. = Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. Materialwissenschaft und Werkstofftechnik, 46 (1). pp. 69-77. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

Cajner, Franjo and Landek, Darko (2012) Posebnosti toplinske obrade alatnih čelika. = Specificities of the heat treatment of tool steels. In: Heat Treatment and Surface Engineering – European Opportunities for Croatian Economy, 11. 05. 2012., Rijeka, Hrvatska.

Cajner, Franjo and Landek, Darko and Cajner, Hrvoje and Rafael, Hrvoje and Kovačić, Saša (2014) Characteristics of Warm Baths for the quenching of Tool Steels. = Characteristics of Warm Baths for the quenching of Tool Steels. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 09.-11.04.2014., Ljubljana, Slovenija.

Cajner, Franjo and Landek, Darko and Kovačić, Saša (2015) Introduction and application of new tehnologies of plasma nitriding and PACVD coating. = Introduction and application of new tehnologies of plasma nitriding and PACVD coating. In: 5th International Conference „Mechanical Technologies and Structural Materials“, 24-25.9.2015, Split, Hrvatska.

Cajner, Franjo and Landek, Darko and Kumić, Ivan and Kovačić, Saša and Rafael, Hrvoje (2014) Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. = Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Cajner, Franjo and Landek, Darko and Kumić, Ivan and Vugrinčić, Amalija (2013) Influential factors in the surface-hardness testing of a nitrided layer. = Influential factors in the surface-hardness testing of a nitrided layer. Materiali in Tehnologije, 47 (4). pp. 531-533. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). .

Cajner, Franjo and Landek, Darko and Leskovšek, Vojteh (2010) Surface modifications of maraging steels used in the manufacture of moulds and dies. = Surface modifications of maraging steels used in the manufacture of moulds and dies. Materiali in Tehnologije, 44 (2). pp. 85-91. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. Journal of Engineering and Technology, 1 (1). pp. 1-9. ISSN 1338-2330. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. In: 10th International Scientific Conference New Ways in Manufacturing Technologies, 17-19. 06. 2010., Prešov; Slovakia.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Jačan, Jurica and Bogdanić, Dino (2015) Wear resistance of TiN / TiCN and TiN / Ti - B - N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. = Wear resistance of TiN / TiCN and TiN / Ti - B - N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. In: The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20-22.05.2015., Venecija, Italija.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Kovačić, Saša (2011) Effect of the heating rate in the tempering of steel grade EN 100 V1. = Effect of the heating rate in the tempering of steel grade EN 100 V1. In: The 3rd IFHTSE-Conference on “Heat Treatment and Surface Engineering of Tools and Dies”., 23-25. 03. 2011, Wels, Austrija.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Šolić, Sanja and Kovačić, Saša (2011) Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. = Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. In: IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.

Cajner, Franjo and Leskovšek, Vojteh and Pustaić, Dragan (2013) Correlation between microstructure, hardness and fracture toughness of heat-treated high-speed steel. = Correlation between microstructure, hardness and fracture toughness of heat-treated high-speed steel. In: The 30th DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, 25-28.09.2013., Primošten, Hrvatska.

Cajner, Franjo and Leskovšek, Vojteh and Pustaić, Dragan (2014) Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. = Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.

Cajner, Franjo and Šolić, Sanja and Kumić, Ivan and Leskovšek, Vojteh (2011) Effect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel. = Effect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel. In: 3rd International IFHTSE Conference on "Heat treatment and Surface engineering of Tools and Dies", Wels, Austrija.

Cajner, Hrvoje (2011) Višekriterijsko adaptivno oblikovanje planova pokusa. = Multi-criteria adaptive design of experimental plans. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šakić, Nikola.

Cajner, Hrvoje and Babić, Anita and Šakić, Nikola (2010) Pokusi sa smjesama - primjena pri optimiranju svojstava materijala. = In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Cajner, Hrvoje and Babić, Anita and Šakić, Nikola (2010) Značaj uporabe planiranja pokusa pri optimiranju procesa i proizvoda. = Importance of using design of experiments in process and product optimization. In: 10. hrvatska konferencija o kvaliteti i 1. znanstveni skup hrvatskog društva za kvalitetu, 10-12.05.2010., Šibenik; Croatia.

Cajner, Hrvoje and Kovačec, Miroslav and Štefanić, Nedeljko (2015) Potencijal korištenja alata LEAN menadžmenta u hrvatskim tvrtkama. = The potential of using lean management tools in Croatian companies. In: Lean Spring Summit 2015, 21.-23.05.2015., Šibenik, Hrvatska.

Cajner, Hrvoje and Mačković, Mario and Štefanić, Nedeljko and Grubešić, Nikola (2014) Characterization of the explosion of flammable gas in closed pipes using the design of experiments methodology. = Characterization of the explosion of flammable gas in closed pipes using the design of experiments methodology. In: 6th International Scientific Conference Management of Technology – Step to Sustainable Production, 11.-13. lipanj 2014., Bol, Island Brac, Croatia.

Cajner, Hrvoje and Đukić, Goran and Kovačec, Miroslav and Štefanić, Nedeljko (2015) The analysis of lean management indicators in Croatian companies. = The analysis of lean management indicators in Croatian companies. In: MOTSP 2015, 10.-12.06.2015., Brela, Hrvatska.

Cajner, Hrvoje and Šakić, Nikola and Ćosić, Predrag (2012) Definition of new criterion in design of experiments based on model precision. = Definition of new criterion in design of experiments based on model precision. In: Management of Technology Step to Sustainable Production MOTSP2012, 14.-16.06.2012., Zadar, Republika Hrvatska.

Cao, Ruijie and Tan, Houzhang and Wang, Xuebin and Mikulčić, Hrvoje and Duić, Neven (2016) The research and the engineering demonstration of particles agglomeration in phase transition process improving the collection efficiency of WESP. = The research and the engineering demonstration of particles agglomeration in phase transition process improving the collection efficiency of WESP. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran.

Cao, Ruijie and Tan, Houzhang and Xiong, Yingying and Mikulčić, Hrvoje and Vujanović, Milan and Wang, Xuebin and Duić, Neven (2017) Improving the removal of particles and trace elements from coal-fired power plants by combining a wet phase transition agglomerator with wet electrostatic precipitator. = Improving the removal of particles and trace elements from coal-fired power plants by combining a wet phase transition agglomerator with wet electrostatic precipitator. Journal of cleaner production. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6. (In Press)

Capan, Tihomir (2017) Tehno-ekonomska analiza kogeneracijskog postrojenja na biomasu u sklopu drvne industrije. = Techno-economic analysis of a biomass cogeneration plant as part of wood industry facility. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Cardiff, Philip and Tuković, Željko and DeJaeger, Peter and Clancy, Michael and Ivanković, Alojz (2017) A Lagrangian cell-centred finite volume method for metal forming simulation. = A Lagrangian cell-centred finite volume method for metal forming simulation. International journal for numerical methods in engineering, 109 (13). pp. 1777-1803. ISSN 0029-5981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.

Cardiff, Philip and Tuković, Željko and Jasak, Hrvoje and Ivanković, Alojz (2016) A block-coupled Finite Volume methodology for linear elasticity and unstructured meshes. = A block-coupled Finite Volume methodology for linear elasticity and unstructured meshes. Computers & structures, 175. pp. 100-122. ISSN 0045-7949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.

Carolan, Declan and Tuković, Željko and Murphy, Neal and Ivanković, Alojz (2013) Arbitrary crack propagation in multi-phase materials using the finite volume method. = Arbitrary crack propagation in multi-phase materials using the finite volume method. Computational Materials Science, 69. pp. 153-159. ISSN 0927-0256. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.

Cash, Philip and Stanković, Tino and Štorga, Mario (2013) An Analysis of Engineers Information Seeking Activity. = An Analysis of Engineers Information Seeking Activity. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE 2013, 04-07.08.2013., Portland, SAD.

Cash, Philip and Stanković, Tino and Štorga, Mario (2016) An introduction to experimental design research. = An introduction to experimental design research. In: Experimental Design Research - Approaches, Perspectives, Applications. Springer International Publishing, Switzerland, pp. 3-12. ISBN 78-3-319-33779-1

Cash, Philip and Škec, Stanko and Štorga, Mario (2013) A bibliometric analysis of the DESIGN 2012 conference. = A bibliometric analysis of the DESIGN 2012 conference. In: ICED 2013, 19-22.08.2013., Seoul, Korea.

Cash, Phillip and Stanković, Tino and Štorga, Mario (2014) Using visual information analysis to explore complex patterns in the activity of designers. = Using visual information analysis to explore complex patterns in the activity of designers. Design studies, 35 (1). pp. 1-28. ISSN 0142-694X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Cash, Phillip and Štorga, Mario (2015) Multifaceted assessment of ideation: using networks to link ideation and design activity. = Multifaceted assessment of ideation: using networks to link ideation and design activity. Journal of engineering design, 26 (10-12). pp. 391-415. ISSN 0954-4828. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Ceraj, Luka (2017) Neizrazito prediktivno upravljanje mobilnim robotom. = Mobile robot fuzzy predictive control. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Cerinski, Damijan and Petranović, Zvonimir and Vujanović, Milan and Samec, Niko and Hriberšek, Matjaž (2017) CFD Analysis of Combustion Process in a Jet Engine Can Combustion Chamber. = CFD Analysis of Combustion Process in a Jet Engine Can Combustion Chamber. In: 8th European Combustion Meeting (ECM 2017), 18-21.04.2017., Dubrovnik, Republika Hrvatska.

Cerovac, Tin and Ćosić, Boris and Pukšec, Tomislav and Duić, Neven (2013) Advanced System Analysis Using Scenario Approach – the Case Study of Croatia. = Advanced System Analysis Using Scenario Approach – the Case Study of Croatia. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.

Cerovac, Tin and Ćosić, Boris and Pukšec, Tomislav and Duić, Neven (2014) Wind energy integration into future energy systems based on conventional plants - The case study of Croatia. = Wind energy integration into future energy systems based on conventional plants - The case study of Croatia. Applied Energy, 135. pp. 643-655. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.

Cerovečki, Bruno (2017) Mokro podvodno zavarivanje martenzitnog čelika X3CrNiMo13-4. = Underwater wet welding of martensitic steel X3CrNiMo13-4. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Cerovečki, Bruno (2018) Primjena D-Arc postupka za zavarivanje debelostjenih konstrukcija. = Application od D-Arc process for welding of thick-walled structures. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Cerovski, Bruno (2016) Aditivi za maziva koja se koriste u vozilima. = Additives for lubricants used in vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Cerovšek, Katarina and Ćosić, Predrag (2014) Machine tools selection in process planning using the AHP method. = Machine tools selection in process planning using the AHP method. In: 6th International Scientific Conference Management of Technology - Step to Sustainable Production, 11.-13.0. 2014., Bol, Hrvatska.

Cesar, Filip (2014) Šumska traktorska prikolica. = Forest tractor trailer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Charin, Amanda and Tuković, Željko and Jasak, Hrvoje and Silva, Luiz Fernando and Lage, Paulo (2017) A moving mesh interface tracking method for simulation of liquid–liquid systems. = A moving mesh interface tracking method for simulation of liquid–liquid systems. Journal of computational physics, 334. pp. 419-441. ISSN 0021-9991. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.

Cho, Dae Seung and Choi, Tae Muk and Kim, Jin Hyeong and Vladimir, Nikola (2016) Structural intensity analysis of stepped thickness rectangular plates utilizing the finite element method. = Structural intensity analysis of stepped thickness rectangular plates utilizing the finite element method. Thin-walled structures, 109. pp. 1-12. ISSN 0263-8231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Cho, Dae Seung and Hadžić, Neven and Senjanović, Ivo (2013) Influence of Different Restoring Stiffness Formulations on Hydroelastic Response of Large Container Ships. = Influence of Different Restoring Stiffness Formulations on Hydroelastic Response of Large Container Ships. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (3). ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

Cho, Dae Seung and Hadžić, Neven and Senjanović, Ivo and Vladimir, Nikola (2013) Formulacija konačnih elemenata za analizu vibracija debele ploče bez smične blokade. = Shear locking-free finite element formulation for thick plate vibration analysis. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (3). pp. 256-278. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 4.

Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Choi, Tae Muk and Vladimir, Nikola (2016) Free vibration analysis of stiffened panels with lumped mass and stiffness attachments. = Free vibration analysis of stiffened panels with lumped mass and stiffness attachments. Ocean engineering, 124. pp. 84-93. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.

Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Vladimir, Nikola and Choi, Tae Muk (2015) Forced vibration analysis of arbitrarily constrained rectangular plates and stiffened panels using the assumed mode method. = Forced vibration analysis of arbitrarily constrained rectangular plates and stiffened panels using the assumed mode method. Thin-walled structures, 90. pp. 182-190. ISSN 0263-8231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Vladimir, Nikola and Choi, Tae Muk (2015) Frequency response of rectangular plate structures in contact with fluid subjected to harmonic point excitation force. = Frequency response of rectangular plate structures in contact with fluid subjected to harmonic point excitation force. Thin-walled structures, 95. pp. 276-286. ISSN 0263-8231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Vladimir, Nikola and Choi, Tae Muk (2016) Frequency response of rectangular plates with free-edge openings and carlings subjected to point excitation force and enforced displacement at boundaries. = Frequency response of rectangular plates with free-edge openings and carlings subjected to point excitation force and enforced displacement at boundaries. International Journal of Naval Architecture and Ocean Engineering, 8 (2). pp. 117-126. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 5.

Cho, Dae Seung and Kim, Byung Hee and Vladimir, Nikola and Choi, Tae Muk (2015) Natural vibration analysis of rectangular bottom plate structures in contact with fluid. = Natural vibration analysis of rectangular bottom plate structures in contact with fluid. Ocean engineering, 103. pp. 171-179. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.

Cho, Dae Seung and Kim, Byung Hee and Vladimir, Nikola and Choi, Tae Muk (2016) Natural vibration analysis of vertical rectangular plates and stiffened panels in contact with fluid on one side. = Natural vibration analysis of vertical rectangular plates and stiffened panels in contact with fluid on one side. Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, 230 (1). pp. 114-125. ISSN 1475-0902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.

Cho, Dae Seung and Kim, Jin Hyeong and Choi, Tae Muk and Kim, Byung Hee and Vladimir, Nikola (2016) Dynamic analysis of rectangular plate structures with arbitrary edge supports subjected to harmonic point excitation force or enforced boundary displacement. = Dynamic analysis of rectangular plate structures with arbitrary edge supports subjected to harmonic point excitation force or enforced boundary displacement. In: The 6th International Conference on Structural Engineering, Mechanics and Computation SEMC-2016, 05-07.09.2016., Cape Town, South Africa.

Cho, Dae Seung and Senjanović, Ivo and Vladimir, Nikola (2012) Application of 1D FEM & 3D BEM hydroelastic model for stress concentration assessment in large container ships. = Application of 1D FEM & 3D BEM hydroelastic model for stress concentration assessment in large container ships. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 63 (4). pp. 307-317. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2014) Free vibration analysis of rectangular plates with multiple rectangular openings and arbitrary edge constraints. = Free vibration analysis of rectangular plates with multiple rectangular openings and arbitrary edge constraints. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2015) Natural vibration analysis of stiffened panels with arbitrary edge constraints using the assumed mode method. = Natural vibration analysis of stiffened panels with arbitrary edge constraints using the assumed mode method. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 229 (4). pp. 340-349. ISSN 1475-0902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 3.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2014) Numerical procedure for the vibration analysis of arbitrarily constrained stiffened panels with openings. = Numerical procedure for the vibration analysis of arbitrarily constrained stiffened panels with openings. International Journal of Naval Architecture and Ocean Engineering, 6 (4). pp. 763-774. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 3.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2015) Simplified procedure for the free vibration analysis of rectangular plate structures with holes and stiffeners. = Simplified procedure for the free vibration analysis of rectangular plate structures with holes and stiffeners. Polish Maritime Research, 22 (2(86)). pp. 71-78. ISSN 1233-2585. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 3.

Christoforidis, Georgios and Papagiannis, Grigoris and Brain, Mike and Pukšec, Tomislav (2014) Establishing an assessment framework for energy sustainability in prisons: The E-SEAP project. = Establishing an assessment framework for energy sustainability in prisons: The E-SEAP project. In: 14th International Conference on Environment and Electrical Engineering, EEEIC 2014, 10-12.05.2014., Krakow; Poland.

Cicvarić, Eugen (2017) Automatizacija procesa proizvodnje elektromotora. = Automatisation of the production process of electric motors. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Cicvarić, Eugen and Kunica, Zoran (2017) The automation of the painting process. = The automation of the painting process. In: 4th International Conference and Workshop Mechatronics in Practice and Education – MECHEDU 2017, 04-05.05.2017., Subotica, Srbija.

Cicvarić, Jure Josip (2018) Analiza biomehanike koljena u sportskim kretnjama. = Analysis of knee biomechanics in sports movements. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Cigić, Igor (2014) Projekt ispitne stanice za kotlove na drvene pelete. = Test rig for wood-pellets boilers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Ciglar, Damir and Udiljak, Toma and Klaić, Miho and Mulc, Tihomir (2012) Design of Portable Carving Machine. = Design of Portable Carving Machine. In: International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” (16 ; 2012), 10.-12.9.2012, Dubai, AUE.

Ciglar, Damir and Udiljak, Toma and Mulc, Tihomir and Staroveški, Tomislav (2012) Suvremeni alatni strojevi i njihovi moduli. = Modern machine tools and their modules. In: 3rd International Conference "Vallis Aurea ", 5.10.2012., Požega, Hrvatska.

Ciglar, Damir and Udiljak, Toma and Staroveški, Tomislav and Balder, Damir (2010) Granična proizvodnost postupka brušenja. = Limited Grinding Productivity. In: 2nd International conference VALLIS AUREA Focus on: Regional development, 03.09.2010., Požega; Croatia.

Ciković, Zoran (2015) Razvoj upravljačkog algoritma za planiranje kretanja mobilnog robota. = Development of path-planning algorithm of a mobile robot. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Cindori, Mihael (2016) Nova metoda za računalno modeliranje atmosferskog graničnog sloja. = A novel method for computational modelling of the atmospheric boundary layer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Franjo.

Cipek, Mihael (2015) Modeliranje, analiza i optimalno upravljanje pogonima hibridnih električnih vozila. = Modeling, analysis, and optimal control of hybrid electric vehicle powertrains. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Cipek, Mihael and Bitanga, Petar and Mlinarić, Tomislav Josip and Pavković, Danijel and Kljaić, Zdenko (2018) Comparative analysis of conventional diesel-electric and hybrid-electric heavy haul locomotive based on mountain rail route driving scenario. = Comparative analysis of conventional diesel-electric and hybrid-electric heavy haul locomotive based on mountain rail route driving scenario. In: The 3rd South East Europe (SEE) Sustainable Development of Energy Water and Environment Systems (SDEWES) conference, 30.06-04.07.2018., Novi Sad, Vojvodina, Srbija.

Cipek, Mihael and Deur, Joško and Petrić, Joško (2010) Bond graph analysis of power flow in series-parallel hybrid electric vehicle transmissions. = Bond graph analysis of power flow in series-parallel hybrid electric vehicle transmissions. In: UKACC International Conference on CONTROL 2010, 07-10.09.2010., Coventry, United Kingdom.

Cipek, Mihael and Deur, Joško and Petrić, Joško (2010) Bond graph modeling and analysis of series-parallel hybrid electric vehicle transmissions. = Bond graph modeling and analysis of series-parallel hybrid electric vehicle transmissions. In: SAE 2010 World Congress and Exhibition, 13-15-04.2010., Detroit, MI, United States.

Cipek, Mihael and Deur, Joško and Petrić, Joško (2012) Bond graph modelling and power flow analysis of series–parallel HEV transmissions. = Bond graph modelling and power flow analysis of series–parallel HEV transmissions. International Journal of Powertrains, 1 (4). pp. 396-419. ISSN 1742-4267. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Cipek, Mihael and Pavković, Danijel and Petrić, Joško (2011) A Control-oriented simulation model of a power-split hybrid electric vehicle. = A Control-oriented simulation model of a power-split hybrid electric vehicle. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2011, 25-29.09.2011., Dubrovnik, Hrvatska.

Cipek, Mihael and Pavković, Danijel and Petrić, Joško (2013) A control-oriented simulation model of a power-split hybrid electric vehicle. = A control-oriented simulation model of a power-split hybrid electric vehicle. Applied Energy, 101 (SI). pp. 121-133. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Cipek, Mihael and Petrić, Joško and Pavković, Danijel (2018) A Novel Approach to Hydraulic Drive Sizing Methodology and Efficiency Estimation based on Willans Line. = A Novel Approach to Hydraulic Drive Sizing Methodology and Efficiency Estimation based on Willans Line. Journal of sustainable development of energy, water and environment systems. ISSN 1848-9257. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3. (In Press)

Cipek, Mihael and Petrić, Joško and Pavković, Danijel and Kučinić, Damir (2017) A hydraulic component scalability tool based on Willans Line method towards the optimal design of hybrid hydraulic vehicles. = A hydraulic component scalability tool based on Willans Line method towards the optimal design of hybrid hydraulic vehicles. In: The 12th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES 2017., 04-08.10.2017., Dubrovnik, Hrvatska.

Cipek, Mihael and Čorić, Mirko and Škugor, Branimir and Kasać, Josip and Deur, Joško (2013) Dynamic programming-based optimization of control variables of an extended range electric vehicle. = Dynamic programming-based optimization of control variables of an extended range electric vehicle. In: SAE 2013 World Congress & Exhibition, 16-18.04.2013., Detroit, MI, United States.

Cipek, Mihael and Škugor, Branimir and Deur, Joško (2014) Comparative analysis of conventional and electric delivery vehicles based on realistic driving cycles. = Comparative analysis of conventional and electric delivery vehicles based on realistic driving cycles. In: European Electric Vehicle Congress EEVC-2014, 02-05.12.2014., Brussels, Belgija.

Cipek, Mihael and Škugor, Branimir and Čorić, Mirko and Kasać, Josip and Deur, Joško (2016) Control variable optimisation for an extended range electric vehicle. = Control variable optimisation for an extended range electric vehicle. International Journal of Powertrains, 5 (1). pp. 30-54. ISSN 1742-4267. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Criscione, Antonio and Kintea, D. and Tuković, Željko and Jakirlića, Suad and Roismana, I.V. and Tropea, Cameron (2013) Crystallization of supercooled water: A level-set-based modeling of the dendrite tip velocity. = Crystallization of supercooled water: A level-set-based modeling of the dendrite tip velocity. International Journal of Heat and Mass Transfer, 66. pp. 830-837. ISSN 0017-9310. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 6.

Criscione, Antonio and Kintea, Daniel and Tuković, Željko and Jakirlic, Suad and Roisman, Ilia V. and Tropea, Cameron (2012) On Computational Investigation of the Supercooled Stefan Problem. = On Computational Investigation of the Supercooled Stefan Problem. In: 12th International Conference on Liquid Atomization and Spray Systems ICLASS 2012, 02-06.09.2012., Heidelberg, Germany.

Crneković, Martin (2015) Mogućnosti primjene koncepcije Interneta objekata u održavanju. = Application possibilities of Internet of Things in maintenance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Crneković, Mladen and Demetlika, Andrea and Tomašić, Tomislav (2012) Self-balancing mobile robot tilter. = Self-balancing mobile robot tilter. Transactions of FAMENA, 36 (3). pp. 23-32. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.

Crneković, Mladen and Kovač, Milan (2017) Vehicle for disabled persons with the possibility of overcoming the stairs. = Vehicle for disabled persons with the possibility of overcoming the stairs. In: CIM 2017: 16th International Scientific Conference on Production Engineering, 08-10.06.2017., Zadar, Hrvatska.

Crneković, Mladen and Pavlic, Tomislav and Lukas, Marin (2015) Programming language for the eMIR mobile robot. = Programming language for the eMIR mobile robot. In: 15th International Scientific Conference on Production Engineering, 10-13.06.2015., Vodice, Hrvatska.

Crneković, Mladen and Zorc, Davor and Kunica, Zoran (2013) Mobile robot vision system for object color tracking. = Mobile robot vision system for object color tracking. In: 14th International Scientific Conference on Production Engineering, 19-22.06.2013., Biograd, Hrvatska.

Crneković, Mladen and Zorc, Davor and Kunica, Zoran (2012) Research of mobile robot behavior with eMIR. = Research of mobile robot behavior with eMIR. In: International Conference on Innovative Technologies, 26-28.09.2012., Rijeka, Hrvatska.

Crnečki, Martin (2018) Primjena simulatora zavarivanja za obuku zavarivača. = Application of virtual welding simulator in welder training. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Crnko, Martina (2015) Analiza utjecaja jediničnog pakovanja na logističke procese. = Analysis of the impact of unit packages on the logistics processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Crnčević, Luka (2017) Dinamičko-mehanička analiza polimera različitom frekvencijom. = Dynamic-mechanical analysis of polymers with different frequencies. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Crnčević, Luka (2016) Mehanička svojstva ortopedskih gipseva. = Mechanical properties of orthopedic casts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Crnčević, Luka and Haramina, Tatjana and Andabak, Anko (2016) Mehanička svojstva ortopedskih gipseva. = Mechanical properties of orthopedic casts. In: 17th International Conference on Materials, Tribology and Recycling MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.

Crvelin, Mihovil Jakov (2016) Hidraulički proračun cirkulacije u isparivaču generatora pare. = Hydraulic fluid flow calculation in a steam generator evaporator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.

Crvelin, Mihovil Jakov (2018) Usporedba klasičnog kombiniranog postrojenja i kombiniranog postrojenja s ubrizgavanjem vode. = Comparison of classic combined power plant and combined power plant with water injection. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.

Cukrov, Alen (2015) Automatski generator mreže kontrolnih volumena za diskretizaciju sintetičke mikrostrukture. = An automatic finite volume mesh generator for synthetic microstructure discretization. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Cukrov, Alen and Horvat, Tomislav and Vrandečić, Tin (2013) Temperaturno polje neizotermnog turbulentnog mlaza. = Temperature field of nonisothermal turbulent jet. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji ; 11. Konferencija o termografiji, 11.04.2013., Zagreb, Republika Hrvatska.

Cukrov, Alen and Horvat, Tomislav and Vrandečić, Tin and Švaić, Srećko (2013) Neizotermni turbulentni mlaz: analiza smanjenja centralne brzine. = Nonisothermal turbulent jet: analysis of centerline velocity decay. In: Peti susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Republika Hrvatska.

Cukrov, Alen and Lugarić, Tomislav and Juretić, Franjo (2016) cfMeshPRO - automatski generator mreže kontrolnih volumena. = cfMeshPRO - An Automatic Finite Volume Mesh Generator. In: Sedmi susret Hrvatskoga društva za mehaniku, 16.-17.06.2016., Split, Hrvatska.

Cukrov, Alen and Sato, Yohei and Boras, Ivanka and Ničeno, Bojan (2018) Numerical Simulation of Annular Flow Boiling in a Vertical Pipe Using Two-Fluid Model. = Numerical Simulation of Annular Flow Boiling in a Vertical Pipe Using Two-Fluid Model. In: 9th International Congress of Croatian Society of Mechanics, 18-22.09.2018., Split, Hrvatska.

Cukrov, Alen and Tuković, Željko and Ničeno, Bojan and Boras, Ivanka and Galović, Antun (2017) On Mixture Model Application in Numerical Modeling of Boiling Phenomena. = On Mixture Model Application in Numerical Modeling of Boiling Phenomena. In: 24th International Symposium on Heating, Refrigerating and Air Conditioning, 6.4.2017., Zagreb.

Curman, Dominik (2015) Mobilna platforma za skidanje ingota s kamiona. = Mobile platform for downloading ingots from truck. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Curman, Martin (2019) Preskriptivno održavanje. = Prescriptive maintenance. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Cvijetić, Gregor (2015) Analiza i implementacija metode harmoničke ravnoteže u proračunskoj mehanici fluida. = Analysis and implementation of the Harmonic Balance Method in computational fluid dynamics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Cvijetić, Gregor and Jasak, Hrvoje (2016) Harmonic Balance Method for Turbomachinery Applications. = Harmonic Balance Method for Turbomachinery Applications. In: 11th OpenFOAM Workshop, 26-30.06.2016., Guimarães, Portugal.

Cvijetić, Gregor and Jasak, Hrvoje (2016) Primjena metode harmonijske ravnoteže za simulacije turbostrojeva. = Harmonic Balance Method for Application in Turbomachinery Simulations. In: Sedmi susret Hrvatskoga društva za mehaniku, 16-17.06.2016., Split, Hrvatska.

Cvijetić, Gregor and Jasak, Hrvoje and Vukčević, Vuko (2016) Finite volume implementation of the harmonic balance method for periodic non–linear flows. = Finite volume implementation of the harmonic balance method for periodic non–linear flows. In: 54th AIAA Aerospace Sciences Meeting: AIAA SciTech, 4-8.01.2016., San Diego, Kalifornija.

Cvok, Ivan (2017) Izrada upravljačkog programa eksperimentalnog postava za ispitivanje percepcije vozača o udobnosti vožnje. = Control software development for an experimental setup aimed at testing the driver comfort perception. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Cvok, Ivan (2018) Sinteza i usporedna analiza sustava regulacije vertikalne dinamike vozila uz primjenu aktivnog i poluaktivnog ovjesa. = Design and comparative analysis of vertical vehicle dynamics control systems based on active and semi-active suspension. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

D

Dabro, Ante (2016) Prilagodba robota za glodaći ispitni postav. = Robot adaptation for milling testbed. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Daković, Mario and Hegedić, Miro (2016) Risk Management Approaches in Oil and Gas Onshore Construction Projects (Project Management). = Risk Management Approaches in Oil and Gas Onshore Construction Projects (Project Management). In: Mangement of Technology Step to Sustainable Technology, MOTSP 2014, 11-13.06.2014., Bol, Hrvatska.

De Dominicis, Ilaria and Cvijetić, Gregor and Willetts, Mark and Jasak, Hrvoje (2016) Enhanced Turbomachinery Capabilities for foam-extend: Development and Validation. = Enhanced Turbomachinery Capabilities for foam-extend: Development and Validation. In: 11th OpenFOAM Workshop, 26-30.06.2016., Guimarães, Portugal.

De Marco, Marjam (2017) Postupci uzorkovanja pri pregledima po obilježjima. = Sampling procedures for inspection by attributes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

De Marco, Marjam (2018) Primjena metoda strojnog učenja u proizvodnim sustavima. = Application of machine learning methods in production systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Debelec, Antonio (2015) Numerička simulacija procesa zavarivanja. = Numerical Simulation of Welding Process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Dedinec, Aleksandar and Markovska, Nataša and Taseska, Verica and Duić, Neven and Kanevce, Gligor (2013) Assessment of climate change mitigation potential of the Macedonian transport sector. = Assessment of climate change mitigation potential of the Macedonian transport sector. Energy, 57. pp. 177-187. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 5.

Dedić, Vedran (2015) Projekt etalonskog sustava za usporedbeno umjeravanje mjerila vakuuma. = Design of standard system for comparison calibration of vacuum gauges. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Degiuli, Nastia and Vukčević, Vuko and Werner, Andreja (2012) Application of smoothed particle hydrodynamics method for simulating incompressible laminar flow. = Application of smoothed particle hydrodynamics method for simulating incompressible laminar flow. Transactions of FAMENA, 36 (4). pp. 1-12. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 3.

Deković, Dean (2017) Uređaj za instaliranje ispitnog manipulatora u horizontalni parogenerator. = Device for insallation of the inspection manipulator in the horizontal steam generator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Delač, Domagoj (2016) Utjecaj parametara elektroplinskog zavarivanja na mehanička svojstva zavarenog spoja. = Effect of electrogas welding parameters on mechanical properties of welded joint. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Delaš, Josipa (2018) Primjena aksiomatskih principa za evaluaciju proizvoda. = Application of Axiomatic principles for product evaluation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škec, Stanko.

Delić, Fran (2017) Validacija modela turbulencije na primjerima strujanja na aeroprofilima i krilima s prijelazom iz laminarnog u turbulentni režim. = Validation of turbulence models on airfoils and wings with laminar to turbulent transition. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Delić, Korana (2016) Tribološka svojstva prevučenih i neprevučenih tvrdih metala. = Tribological properties of coated and uncoated hardmetals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

Dergestin, Denis (2018) Utjecaj napunjenosti rashladnog uređaja radnom tvari na njegove radne karakteristike. = Influence of a refrigerant charge on performanace of a refrigeration unit. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.

Dervišević, Dražen (2015) Razvoj rotacijske sonde za ispitivanje cijevi metodom vrtložnih struja. = Development of the eddy current rotary probe for tube testing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Deur, Joško and Assadian, Francis and Hancock, Matthew (2010) Parameter optimization of PID class of yaw rate controllers. = Parameter optimization of PID class of yaw rate controllers. In: UKACC International Conference on CONTROL 2010, 07-10.09.2010., Coventry, United Kingdom.

Deur, Joško and Barber, Phil and Hancock, Matthew (2011) Design of a cascade structure of sideslip and yaw rate control. = Design of a cascade structure of sideslip and yaw rate control. In: International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2011), 14-19. 08. 2011., Manchester, UK.

Deur, Joško and Cipek, Mihael and Petrić, Joško (2010) Bond graph modeling of series-parallel hybrid electric vehicle power train dynamics. = Bond graph modeling of series-parallel hybrid electric vehicle power train dynamics. In: 9th International Conference on Bond Graph Modeling & Simulation (ICBGMS), Spring Simulation Multiconference 2010, 11-15.04.2010., Orlando, FL, United States.

Deur, Joško and Cipek, Mihael and Škugor, Branimir and Petrić, Joško (2012) Modeling and low-level control of range extended electric vehicle dynamics. = Modeling and low-level control of range extended electric vehicle dynamics. In: 1st Biannual International Conference on Powertrain Modelling and Control (PMC2012), 04-06.09.2012., West Yorkshire, United Kingdom.

Deur, Joško and Ivanović, Vladimir and Hancock, Matthew and Assadian, Francis (2010) Modeling and analysis of active differential dynamics. = Modeling and analysis of active differential dynamics. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 132 (6). ISSN 0022-0434. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2010). Točan broj autora: 4.

Deur, Joško and Ivanović, Vladimir and Kuang, Ming and Assadian, Francis and Tseng, H. Eric and Hrovat, Davor (2012) Bond graph modeling of automotive transmission and drivelines. = Bond graph modeling of automotive transmission and drivelines. In: MathMod 2012 – 7th Vienna International Conference on Mathematical Modelling, 15-17.02. 2012., Vienna, Austria.

Deur, Joško and Kasać, Josip and Hancock, Matthew and Barber, Phil (2011) A study of optimization-based assessment of global chassis control actuator configurations. = A study of optimization-based assessment of global chassis control actuator configurations. In: International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2011), 14-19. 08. 2011., Manchester, UK.

Deur, Joško and Milutinović, Milan and Ivanović, Vladimir and Tseng, H. Eric (2016) Modeling of a dry dual clutch utilizing a lever-based electromechanical actuator. = Modeling of a dry dual clutch utilizing a lever-based electromechanical actuator. Journal of dynamic systems, measurement, and control, 138 (9). ISSN 0022-0434. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 4.

Deur, Joško and Pavković, Danijel (2011) Fundamentals of electrical drive controls. = Fundamentals of electrical drive controls. In: Encyclopedia of Life Support Systems (EOLSS) ; Physical Sciences, Engineering and Technology Resources ; Electrical Engineering. EOLSS Publishers, Oxford, pp. 1-59. ISBN 978-1-905839-79-7

Deur, Joško and Čorić, Mirko and Kasać, Josip and Assadian, Francis and Hrovat, Davor (2014) Applications of computational optimal control to vehicle dynamics. = Applications of computational optimal control to vehicle dynamics. In: Optimization and Optimal Control in Automotive Systems: workshop organized by the Austrian Center of Competence in Mechatronics, ACCM 2013, 15.07.-16.07.2013., Linz, Austria.

Deur, Joško and Čorić, Mirko and Xu, Li and Tseng, Eric Hongtei and Hrovat, Davor (2016) Optimization-based analysis of active suspension authority within integrated vehicle dynamics control systems. = Optimization-based analysis of active suspension authority within integrated vehicle dynamics control systems. In: 13th International Symposium on Advanced Vehicle Control, 13-16.09.2016., München, Njemačka.

Deur, Joško and Škugor, Branimir and Cipek, Mihael (2015) Integracija električnih vozila u energetske i transportne sustave. = Integration of electric vehicles into energy and transport systems. Automatika : časopis za automatiku, mjerenje, elektroniku, računarstvo i komunikacije, 56 (4). pp. 395-410. ISSN 0005-1144. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Deur, Joško and Škugor, Branimir and Cipek, Mihael (2014) Integration of electric vehicles into energy and transport systems. = Integration of electric vehicles into energy and transport systems. In: 34th Conference on Automation in Transportation, 05-09.11.2014., Dubrovnik.

Dika, Vladimir (2017) Prerada kompozita podtlačnim ulijevanjem. = Production of composite with resin infusion process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.

Dika, Vladimir (2016) Razvoj tankostjenog plastomernog pakovanja za injekcijsko prešanje. = Development of thin-walled thermoplastic packaging for injection moulding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Dilber, Viktor (2018) Isključivanje cilindara kao mjera smanjenja potrošnje goriva višecilindarskog motora. = Cylinder deactivation as a measure of fuel economy improvement of multi - cylinder engine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sjerić, Momir.

Dilić, Karlo (2019) Postupak za ispitivanje mjerila toplinske energije. = Procedure for testing of heat meters. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor and Šestan, Danijel.

Dizdarević, Alen (2017) Projektiranje postrojenja i opreme za skladištenje žitarica. = Design of plant and equipment for grain storage. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Djelošević, Mirko and Tepić, Jovan and Tanackov, Ilija J. and Kostelac, Milan (2013) Mathematical identification of influential parameters on the elastic buckling of variable geometry plate. = Mathematical identification of influential parameters on the elastic buckling of variable geometry plate. The Scientific World Journal, 2013. ISSN 2356-6140. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.

Dlaka, Domagoj and Švaco, Marko and Chudy, Darko and Jerbić, Bojan and Šekoranja, Bojan and Šuligoj, Filip and Vidaković, Josip and Almahariq, Fadi and Romić, Dominik (2017) Brain biopsy performed with the RONNA G3 system: a case study on using a novel robotic navigation device for stereotactic neurosurgery. = Brain biopsy performed with the RONNA G3 system: a case study on using a novel robotic navigation device for stereotactic neurosurgery. The International Journal of Medical Robotics and Computer Assisted Surgery, 14 (1). e1884. ISSN 1478-5951. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2017). Točan broj autora: 9.

Dobrilović, Domagoj (2015) Napredni postupci injekcijskog prešanja u automobilskoj industriji. = Advanced injection moulding procedures in automotive industry. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Dobrilović, Domagoj (2017) Programska aplikacija za decentralizirano upravljanje mobilnim robotima u formaciji. = Software Application for Decentralized Control of Mobile Robots in Formation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Andrej.

Dobrić, Bruno (2018) Upravljanje robota interpretacijom ljudskih kretnji. = Robot control by interpretation of human gestures. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Dobrović, Slaven and Blatarić, Zoran (2010) Značaj određivanja SDI indeksa za ocjenu kvalitete vode. = The significance of SDI index determination for the evaluation of water quality. In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Dobrović, Slaven and Juretić, Hrvoje and Ljubas, Davor (2010) Ekonomski i ekološki aspekti recikliranja otpadne vode u industriji. = Economic and environmental aspects of industrial wastewater recycling. In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Dobrović, Slaven and Juretić, Hrvoje and Ljubas, Davor and Smoljanić, Goran (2012) Sustavno laboratorijsko istraživanje kao preduvjet za odabir najprikladnijeg dezinfekcijskog sredstva: klor ili klorov dioksid? = Systematic laboratory research as a prerequisite for the selection of the most appropriate disinfectant: chlorine or chlorine dioxide? In: Aktualna problematika u vodoopskrbi i odvodnji, 24.-28.10.2012., Bol, Hrvatska.

Dobrović, Slaven and Ljubas, Davor and Džeko, Alen (2011) Analiza mogućnosti opskrbe otoka Lastova pitkom vodom korištenjem LCA metodologije. = Analysis of the potable water supply alternatives of the island of Lastovo using LCA methodology. In: Hrvatske vode pred izazovom klimatskih promjena, 18-21.05.2011., Opatija, Hrvatska.

Dobrović, Slaven and Sladoljev, Dinko (2010) Ekološko gospodarenje otpadom. = Ecological waste management. Sustavi, 6. pp. 64-70. ISSN 1846-5080. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Dodić, Mario (2019) Integracija solarnih fotonaponskih sustava na pametnim otocima. = Integration of solar photovoltaic systems on the smart islands. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.

Dodić, Mario (2017) Poboljšanje termodinamičke iskoristivosti plinskoturbinskog postrojenja. = Thermal efficiency improvement of gas turbine power plant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.

Dogan, Ivan and Maričić, Sven and Kranjčević, Lado and Pilipović, Ana and Kovačević Pavičić, Daniela (2014) The Application of 3D Modelling in Biofluid Mechanics. = The Application of 3D Modelling in Biofluid Mechanics. In: 5th International Conference on additive Technologies - iCAT 2014, 15-17.10.2014., Beč, Austrija.

Dogančić, Bruno (2015) Računalna dinamika deformabilnih tijela. = Computational dynamics of deformable bodies. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.

Doko, Marin (2018) Primjena strojnog učenja u održavanju. = Application of machine learning methods in maintenance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Doko, Marin (2016) Proporcionalno "droop" upravljanje i koordinacija pretvarača snage spojenih na naponsku sabirnicu istosmjerne mikromreže. = Proportional droop control and coordination of power converters connected to a DC microgrid voltage bus. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.

Dolenčić, Filip (2018) Keramički kompozitni materijali u suvremenoj automobilskoj industriji. = Ceramic matrix composites in modern automotive industry. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Doležal, Dubravka and Alar, Vesna and Borko, Tihomir (2013) Inhibition of carbon steel corrosion by imidazoline in carbon dioxide saturated oilfield brine solution. = Inhibition of carbon steel corrosion by imidazoline in carbon dioxide saturated oilfield brine solution. Materialwissenschaft und Werkstofftechnik, 44 (7). pp. 626-632. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Dolić, Natalija and Garašić, Ivica and Malina, Jadranka and Kožuh, Zoran (2014) Testing of mechanical properties of almg4.5mn alloy welded by mig procedure and impact of hydrogen on mechanical properties of the welded joint. = Testing of mechanical properties of almg4.5mn alloy welded by mig procedure and impact of hydrogen on mechanical properties of the welded joint. In: 40th CWS International Conference WELDING 2014, Šibenik, Solaris, Hrvatska.

Dolić, Natalija and Malina, Jadranka and Kožuh, Zoran and Garašić, Ivica and Tunić, Jozef (2012) Tensile behaviour of mig welded hydrogenated Al-alloy EN AW-5083. = Tensile behaviour of mig welded hydrogenated Al-alloy EN AW-5083. In: European Conference on Welding, Joining and Cutting (8 ; 2012), Pula, Hrvatska.

Dominković, Dominik Franjo (2015) Uloga dizalica topline velikih snaga u budućim energetskim sustavima. = The role of large scale heat pumps in future energy systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vad Mathiesen, Brian and Krajačić, Goran.

Dominković, Dominik Franjo and Bačeković, Ivan and Ćosić, Boris and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven and Markovska, Nataša (2015) Low Carbon Energy Supply for South East Europe. = Low Carbon Energy Supply for South East Europe. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Dominković, Dominik Franjo and Bačelić Medić, Zlatko and Ćosić, Boris and Duić, Neven (2014) An Optimization Model for Combining Seasonal Pit Thermal Energy Storage and Biomass Trigeneration Energy System. = An Optimization Model for Combining Seasonal Pit Thermal Energy Storage and Biomass Trigeneration Energy System. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29-03.07.2014, Ohrid, Makedonija.

Dominković, Dominik Franjo and Ćosić, Boris and Bačelić Medić, Zlatko and Duić, Neven (2015) A hybrid optimization model of biomass trigeneration system combined with pit thermal energy storage. = A hybrid optimization model of biomass trigeneration system combined with pit thermal energy storage. Energy conversion and management, 104. pp. 90-99. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.

Dominković, Franjo (2015) Fizikalno - kemijska svojstva poliamidnog premaza. = Physical and chemical properties of polyamide coating. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Dominković, Franjo (2016) Primjena MIG postupka za aditivnu proizvodnju električnim lukom i žicom. = Application of MIG process for wire arc additive manufacturing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Domitran, Zoran (2013) Utjecaj odstupanja dimenzija na životni vijek polimernih zupčanika. = Investigation of dimensional tolerances on the polymer gear life. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.

Domitran, Zoran and Brezak, Danko and Staroveški, Tomislav and Klaić, Miho and Bruketa, Tomislav (2018) Experimental and finite element analysis of surgical drill bits with and without irrigation channel – A case study approach. = Experimental and finite element analysis of surgical drill bits with and without irrigation channel – A case study approach. Medical engineering & physics, 62. pp. 29-35. ISSN 1350-4533. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2017). Točan broj autora: 5.

Domitran, Zoran and Žeželj, Dragan and Katana, Branko (2016) Utjecaj kontaktnog pritiska i brzine klizanja na temperaturu i faktor trenje u kontaktu s uzrocima od PET-a. = Influence of contact pressure and sliding speed on the temperature and coefficient of friction in sliding contact between two PET samples. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2). pp. 389-396. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.

Domjanić, Filip (2018) 3D rekonstrukcija i lokalizacija objekata pomoću robota. = 3D object reconstruction and localization by robot. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Domjanić, Filip (2016) Upravljački sklop za električnu hvataljku. = Controler for electric gripper. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan and Šekoranja, Bojan.

Domović, Matija (2016) Konstrukcijsko rješenje SH varijatora. = Design solution of CVT type SH. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.

Domović, Matija (2018) Određivanje svojstava i numeričko modeliranje kompozitnih materijala. = Prediction of mechanical properties and numerical modelling of composite materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.

Doračić, Borna (2016) Model reaplikacije za planiranje, razvoj i integraciju pametnih centraliziranih toplinskih sustava u pametne energetske sustave. = Reapplication model for planning, development and integration of Smart district heating systems in Smart energy system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vad Mathiesen, Brian and Krajačić, Goran.

Dorotić, Tino (2017) Digitalizacija procesa proizvodnje. = Digitalization of production processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Dorotić, Tino (2019) Unapređenje proizvodnih procesa. = Improvement of production processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Dović, Damir (2010) Alternativni sustavi i obnovljivi izvori energije za grijanje, hlađenje i pripremu potrošne tople vode. = Alternative systems and renewable energy sources for space heating, cooling and domestic hot water heatimg. In: Priručnik za energetsko certificiranje zgrada. Program Ujedinjenih naroda za razvoj - UNDP, Zagreb, pp. 411-475. ISBN 978-953-7429-25-6

Drašković, Hrvoje (2015) Procjena okolišnog utjecaja životnog vijeka energetskog transformatora. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Drašner, Stjepan (2017) Traktorski priključak za kalcifikaciju tla. = Tractor device for soil calcification. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Drnas, Ivan (2019) Klizno trošenje kompozitne aluminij oksid - cirkonij oksid keramike. = Sliding wear of alumina - zirconia composite ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Drobilo, Luka and Rudan, Smiljko (2014) NFEM analysis of a composite made hull of autonomous underwater submersible. = NFEM analysis of a composite made hull of autonomous underwater submersible. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 65 (3). pp. 101-115. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 2.

Družinec, Mirna (2014) Analiza energetskog svojstva zgrada sa sunčanim toplovodnim sustavom. = Energy performance analysis of buildings with solar hot water system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Družinec, Mirna and Balen, Igor (2013) Energetska analiza sustava grijanja Nacionalne i sveučilišne knjižnice. = Energy analysis of heating system of National and university library. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji Interklima 2013, 11.04.2013, Zagreb, Hrvatska.

Drvar, Nenad and Jecić, Stjepan and Gomerčić, Mladen (2010) Flexible multi-camera optical surface digitization system. = Flexible multi-camera optical surface digitization system. Strojarstvo, 52 (3). pp. 283-302. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Duboković, Marin (2015) Analiza ponašanja konstrukcije od drva metodom konačnih elemenata. = Finite element method analysis of a wooden structure. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana and Rudan, Smiljko.

Dubreta, Nikša and Miloš, Damir (2017) Elements of Motivational Structure for Studying Mechanical Engineering. = Elements of Motivational Structure for Studying Mechanical Engineering. IAFOR Journal of Education, 5 (3). pp. 89-106. ISSN 2187-0594. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Dugandžić, Marinela (2018) Statičko umjeravanje ticala uređaja za mjerenje kružnosti. = Static probe calibration of roundness measurement device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šimunović, Vedran.

Dugorepec, Andrija (2015) Primjena referentnih materijala za određivanje točnosti pokazivanja instrumentiranog Charpy-evog bata. = The use of reference materials to determine indication accuracy of instrumented Charpy pendulum. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

Duić, Neven (2013) Journal of Sustainable Development of Energy, Water and Environment Systems – Volume I. = Journal of Sustainable Development of Energy, Water and Environment Systems – Volume I. Journal of Sustainable Development of Energy, Water and Environment Systems, 1 (4). p. 390. ISSN 1848-9257. Vrsta rada: Editorial. . Točan broj autora: 1.

Duić, Neven (2014) Journal of Sustainable Development of Energy, Water and Environment Systems – Volume II. = Journal of Sustainable Development of Energy, Water and Environment Systems – Volume II. Journal of Sustainable Development of Energy, Water and Environment Systems, 2 (4). p. 422. ISSN 1848-9257. Vrsta rada: Editorial. . .

Duić, Neven (2015) Journal of Sustainable Development of Energy, Water and Environment Systems – Volume III. = Journal of Sustainable Development of Energy, Water and Environment Systems – Volume III. Journal of Sustainable Development of Energy, Water and Environment Systems, 3 (4). p. 436. ISSN 1848-9257. Vrsta rada: Editorial. . Točan broj autora: 1.

Duić, Neven (2016) Journal of Sustainable Development of Energy, Water and Environment Systems – Volume IV. = Journal of Sustainable Development of Energy, Water and Environment Systems – Volume IV. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (4). pp. 430-431. ISSN 1848-9257. Vrsta rada: Editorial. . Točan broj autora: 1.

Duić, Neven (2010) Sustainable development of energy, water and environmental systems. = Sustainable development of energy, water and environmental systems. Strojarstvo, 52 (4). p. 403. ISSN 0562-1887. Vrsta rada: Editorial. Kvartili JCR: Q4 (2010). Točan broj autora: 1.

Duić, Neven and Guzović, Zvonimir and Kafarov, Vyatcheslav and Klemeš, Jiri Jaromir and Mathiesen, Brian Vad and Yan, Jinyue (2013) Sustainable development of energy, water and environment systems. = Sustainable development of energy, water and environment systems. Applied Energy, 101. pp. 3-5. ISSN 0306-2619. Vrsta rada: Editorial. Kvartili JCR: Q1 (2013). Točan broj autora: 6.

Duić, Neven and Guzović, Zvonimir and Schneider, Daniel Rolph (2010) Southeast Europe in the process of implementation of new European energy and environment strategy. = Southeast Europe in the process of implementation of new European energy and environment strategy. Thermal Science, 14 (3). pp. 1-2. ISSN 0354-9836. Vrsta rada: Editorial. Kvartili JCR: Q3 (2010). Točan broj autora: 3.

Duić, Neven and Haramina, Tatjana and Perković, Luka (2012) High Altitude Wind Energy - HAWE Deliverable 10.3: Materials Selection and Aerodynamic Studies Report. = High Altitude Wind Energy - HAWE Deliverable 10.3: Materials Selection and Aerodynamic Studies Report. HAWE project web pages / deliverables. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3. (In Press)

Duić, Neven and Krajačić, Goran and Pukšec, Tomislav and Ćosić, Boris and Novosel, Tomislav and Ridjan, Iva (2012) Iskorištavanje obnovljivih izvora energije, energetska učinkovitost i smanjenje emisija stakleničkih plinova kao pokretač razvoja “zelene ekonomije” u Hrvatskoj do 2050. = Renewable Energy Sources, Energy Efficiency and Reduction of Greenhouse Gas Emissions as main sources of Development of „Green Economy“ in Croatia until 2050. In: 21. Forum: Dan energije u Hrvatskoj, 23.11.2012., Zagreb, Hrvatska.

Dujman, Josip (2018) Simulacijski model automatiziranog skladišnog sustava s regalnim vozilima. = Simulation model of Shuttle-based storage and retrieval system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Dujman, Josip (2017) Uporaba neparametarske statistike u inženjerskim problemima. = The use of nonparametric statistics in engineering. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Hrvoje.

Dujmić, Dinko (2014) Primjena višekriterijalnog odlučivanja u odabiru lokacije skladišta. = Application of multi criteria decision making in warehouse location problem. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Dujmović, Luka (2010) Comment on "Application of gravitational method by determination of rail vehicles constant resistance", by Tepić and Kostelac, Transactions of FAMENA 32 (2), 2008, pp. 31-40. = Comment on "Application of gravitational method by determination of rail vehicles constant resistance", by Tepić and Kostelac, Transactions of FAMENA 32 (2), 2008, pp. 31-40. Transactions of FAMENA. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). . (Submitted)

Dujmović, Marko (2014) Provjera logističkih aktivnosti vanjskim pružateljima usluga u poduzeću L´oreal Adria d.o.o. Hrvatska. = Logistics outsourcing in L'oreal Adria d.o.o. Croatia. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Dundović, Davor (2017) Proračun požarnog odimljavanja garažnog prostora. = Calculation of evacuation of fire flue gasses in closed garage. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krizmanić, Severino.

Dušak, Martin (2014) Tehnoekonomska analiza proizvodnje biciklističkih dijelova od kompozitnih tvorevina. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Džolan, Ante (2016) Uređaj za otapanje potporne strukture 3D tiskanog modela. = Device for solubilization of the support structure of 3D printed model. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

de Arujo, Manuel Silvino Batalha and Fernandes, Celio and Ferras, Luis Lima and Tuković, Željko and Jasak, Hrvoje and Nobrega, Joao Miguel (2015) Implementation of integral viscoelastic constitutive models in OpenFOAM® computational library. = Implementation of integral viscoelastic constitutive models in OpenFOAM® computational library. In: Novel Trends in Rheology VI, 28-29.7.2015., Zlin, Ceska.

E

El Badawi El Najjar, Rachad and Friedl, Michael and Martinec, Tomislav and Ouamer Ali, Mohamed-Islem and Partie, Marcel and Borg, Jonathan and Vajna, Sándor (2016) Distributed IPD Project-based Learning - a PhD Summer School Student's Perspective. = Distributed IPD Project-based Learning - a PhD Summer School Student's Perspective. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.

Eržišnik, Jadranka and Kožuh, Zoran and Kralj, Slobodan (2010) Safety risks and necessary protective measures in underwater welding. = Safety risks and necessary protective measures in underwater welding. In: Dani varilne tehnike 2010- Zaščita in varnost pri varjenju, 18-21.05.2010., Celje; Slovenia.

Essert, Mario and Kuzmanović, Ivana and Vazler, Ivan and Žilić, Tihomir (2017) Theory of M-system. = Theory of M-system. Logic journal of the IGPL, 25 (5). pp. 836-858. ISSN 1367-0751. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2017). Točan broj autora: 4.

Eterović, Ozren (2015) Analiza tragova trošenja kod endoproteza kuka. = Analysis of wear at endoprosthesis of hip. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Ezgeta, Toni (2018) Karakterizacija zavara cijevi od 25CrMo4 čelika. = Characterisation of welds on 25 CrMo4 tube. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Ezzeldin, Mahdy Abdelmonem M. and Jokić, Andrej and Van Den Bosch, P.P.J. (2010) A parameter varying Lyapunov function approach for tracking control for Takagi-Sugeno class of nonlinear systems. = A parameter varying Lyapunov function approach for tracking control for Takagi-Sugeno class of nonlinear systems. In: 2010 8th IEEE International Conference on Control and Automation, ICCA 2010, 09-11.06.2010., Xiamen, China.

Ezzeldin, Mahdy Abdelmonem M. and Van Den Bosch, P.P.J. and Jokić, Andrej and Waarsing, René (2010) Model-free optimization based feedforward control for an inkjet printhead. = Model-free optimization based feedforward control for an inkjet printhead. In: 2010 IEEE International Conference on Control Applications, CCA 2010, 08-10.09.2010., Yokohama, Japan.

Ešegović, Dominik (2015) Analiza čvrstoće glavnog nosača vjetroagregata. = Stress analysis of wind turbine mainframe. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Ešegović, Dominik (2016) Proračun pneumatskog prsta za zaključavanje manipulatora unutar cijevi parogeneratora. = Stress analysis of pneumatically actuated grippers on manipulator applied throughout the PWR inspection. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor and Bakić, Ante.

F

Fajković, Denis (2015) Membranska naprezanja crvenih krvnih stanica. = Membrane stresses of red blood cells. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Fajković, Denis (2016) Metoda transmisijske linije za analizu strujanja krvi u arterijskom stablu. = A transmission line method for the analysis of blood flow in an arterial tree. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.

Fanjek, Ivan (2019) Konstrukcija dvonožnog hodajućeg robota pokretanog umjetnim pneumatskim mišićima. = Design of a two-legged walking robot driven by pneumatic artificial muscles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Favero, J.L. and Cardozo, N.S.M. and Secchi, A.R. and Jasak, Hrvoje Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam Solver. = Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam Solver. In: 20th European Symposium on Computer Aided Process Engineering ESCAPE20, lipanj 2010., Ischia, Napulj, Italija.

Favero, J.L. and Secchi, A.R. and Cardozo, N.S.M. and Jasak, Hrvoje (2010) Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam solver. = Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam solver. Computer Aided Chemical Engineering, 28. pp. 31-36. ISSN 1570-7946. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Favero, J.L. and Secchi, A.R. and Cardozo, N.S.M. and Jasak, Hrvoje (2010) Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam solver. = Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelasticInterFoam solver. In: European Symposium on Computer Aided Process Engineering (20 ; 2010).

Favero, Jovani L. and Secchi, Argimiro and Cardozo, Nilo and Jasak, Hrvoje (2010) Advances on Viscoelastic Fluid Flow Simulation. = Advances on Viscoelastic Fluid Flow Simulation. In: Single and Two-Phase Flows on Chemical and Biomedical Engineering. Bentham Science Publishers, Sharjah, pp. 233-265. ISBN 978-1-60805-504-3

Faveroa, Jovani L. and Cardozoa, Nilo S.M. and Secchib, Argimiro R. and Jasak, Hrvoje (2010) Viscoelastic flow analysis using the software OpenFOAM and differential constitutive equations. = Viscoelastic flow analysis using the software OpenFOAM and differential constitutive equations. Journal of non-newtonian fluid mechanics, 165 (23/24). pp. 1625-1636. ISSN 0377-0257. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2010). Točan broj autora: 4.

Faveroa, Jovani L. and Cardozoa, Nilo S.M. and Secchib, Argimiro R. and Jasak, Hrvoje (2010) Viscoelastic fluid analysis in internal and in free surface flows using the software OpenFOAM. = Viscoelastic fluid analysis in internal and in free surface flows using the software OpenFOAM. Computers & chemical engineering, 34 (12). pp. 1984-1993. ISSN 0098-1354. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2010). Točan broj autora: 4.

Fekonja, Filip (2018) Pregled različitih pristupa za procjenu mjerne nesigurnosti. = Overview of the different approaches for evaluating measurement uncertainty. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Ferdelji, Nenad (2012) Eksperimentalna i teorijska analiza modela zagrijavanja vode zračenjem. = Experimental and theoretical analysis of radiative water heating model. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.

Ferdelji, Nenad and Halasz, Boris (2013) Theoretical Comparison of Entropy Production and Exergy Destruction in Evaporative and Air Cooled Recuperative Condenser. = Theoretical Comparison of Entropy Production and Exergy Destruction in Evaporative and Air Cooled Recuperative Condenser. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 11. Konferencija o termografiji, 11.04.2013., Zagreb, Hrvatska.

Ferlin, Simon (2016) Numerička analiza čvrstoće i stabilnosti lista kobilice male jedrilice. = Numerical analysis of keel fin for small sailing boat. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Ferlin, Simon (2015) Proračun elastičnog modula za ispitivanje cjevovoda. = Stress analysis of elastic module for pipeline inspection. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.

Ferlin, Simon and Virag, Lana and Karšaj, Igor (2016) Analiza rasta aneurizme abdominalne aorte na temelju CT snimaka. = Analysis of abdominal aortic aneurysm growth based on CT scans. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.

Filetin, Tomislav (2010) Bending stiffness of aluminium foams. = Bending stiffness of aluminium foams. Rad Hrvatske akademije znanosti i umjetnosti. Tehničke znanosti, 506 (15). pp. 81-105. ISSN 1330-0822. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Filetin, Tomislav and Marić, Gojko and Alar, Željko (2010) Mechanical properties of aluminium foam after heat treatment and reinforcing. = Mechanical properties of aluminium foam after heat treatment and reinforcing. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Filetin, Tomislav and Šolić, Sanja and Jakovljević, Suzana (2010) Microhardness of the nacreous and prismatic seashell’s structures. = Microhardness of the nacreous and prismatic seashell’s structures. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Filetin, Tomislav and Žmak, Irena and Šolić, Sanja and Jakovljević, Suzana (2010) Microhardness of Mollusc Seashell Structures. = Microhardness of Mollusc Seashell Structures. In: International Conference on Innovative Technologies IN-TECH, 14-16.09.2010., Prag; Czech Republic.

Filipović, Ivan (2019) Analiza točnosti pozicioniranja neurokirurškog robota. = Position accuracy analysis of neurosurgical robot. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Filipović, Ivan (2017) Detektor prepreka mobilnog robota. = Obstacle detector for mobile robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Filipović, Ivan (2016) Projektiranje i izrada bežične animatroničke šake. = The design and construction of a wireless animatronic hand. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Filipović, Ivan (2017) Robotska stanica za posluživanje stroja za injekcijsko prešanje. = Robotic cell for tending injection moulding machines. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Filipović, Petar (2017) Analiza toplinskih karakteristika polimernog solarnog toplovodnog kolektora. = Analysis of thermal performances of polymer solar hot water collector. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Filipović, Petar (2016) Oblikovanje srpastih lopatica aksijalnog ventilatora. = Design of sickle blades of axial flow fan. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Filipović, Petar and Dominković, Dominik Franjo and Ćosić, Boris (2016) Optimization of the Public Buildings Energy Supply: The Case of the School in Koprivnica. = Optimization of the Public Buildings Energy Supply: The Case of the School in Koprivnica. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15-18.06.2016., Piran, Slovenija.

Filipović, Tomislav (2017) Analiza naprezanja u membranama vestibularnog aparata. = Stress analysis in vestibular membranes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Filipović, Tomislav (2018) Numerička analiza kompozitne proteze za trčanje. = Numerical analysis of a running-specific composite prosthesis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ivančević, Darko.

Filić, Katarina (2018) Konstruiranje naprave za pridržavanje kosti pri SCARF metodi u području stopala. = The design of a bone segment fixation device for SCARF method surgery in the foot region. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Fiolić, Borna (2019) Vibracijski mobilni robot. = Vibratory mobile robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Petar.

Firak, Mihajlo and Đukić, Ankica (2013) Hydrogen Economy: State of the Art and Perspectives. = Hydrogen Economy: State of the Art and Perspectives. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.

Firak, Mihajlo and Đukić, Ankica (2015) Hydrogen transportation fuel in Croatia: Road map strategy. = Hydrogen transportation fuel in Croatia: Road map strategy. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Firak, Mihajlo and Đukić, Ankica (2016) Hydrogen transportation fuel in Croatia: Road map strategy. = Hydrogen transportation fuel in Croatia: Road map strategy. International journal of hydrogen energy, 41 (31). pp. 13820-13830. ISSN 0360-3199. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.

Firak, Mihajlo and Đukić, Ankica (2010) An investigation into the effect of photovoltaic module electric properties on maximum power point trajectory with the aim of its alignment with electrolyzer U-I characteristic. = An investigation into the effect of photovoltaic module electric properties on maximum power point trajectory with the aim of its alignment with electrolyzer U-I characteristic. Thermal Science, 14 (3). pp. 729-738. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2010). Točan broj autora: 2.

Fišter, Dražen (2018) Prikaz i analiza skladišnog sustava poduzeća Okiroto d.o.o. = Review and analysis of Okiroto Ltd. warehousing system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Fofić, Šimun (2017) Traktorski priključak za trešnju stabla. = Tractor mounted tree shaker. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Foley, Aoife and Smyth, Beatrice and Pukšec, Tomislav and Markovska, Nataša and Duić, Neven (2017) A review of developments in technologies and research that have had a direct measurable impact on sustainability considering the Paris agreement on climate change. = A review of developments in technologies and research that have had a direct measurable impact on sustainability considering the Paris agreement on climate change. Renewable & sustainable energy reviews, 68 (2). pp. 835-839. ISSN 1364-0321. Vrsta rada: Editorial. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Fortuna, Petra and Dović, Damir (2011) Energetska učinkovitost povrata topline u klima komorama. = Energy efficiency of heat recovery in air handling units. In: Klima Forum, 3. forum o hlađenju, klimatizaciji i ventilaciji, 13.-14.10.2011., Zadar, Hrvatska.

Franin, Bruno (2016) Numeričko modeliranje zaostalih naprezanja pri zavarivanju. = Numerical modelling of welding residual stresses. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Franičević, Marin (2016) Hidraulički sustav kompaktne vakuumske čistilice. = Hydraulic system of a compact vacuum sweeper. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Franz, Viktor (2016) Metode strateškog planiranja. = Strategic planning methods. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Franz, Viktor (2015) Planiranje i kontrola otpreme gotovih proizvoda. = Planning and control of finished goods' shipping process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Frančeski, Joško (2016) Eksperimentalno i numeričko modeliranje procesa deformiranja epruvete za savijanje u tri točke. = Experimental and numerical modelling of deformation process of specimen under three-point bending test. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Frančeski, Joško and Tonković, Zdenko and Skozrit, Ivica and Surjak, Martin and Krstulović-Opara, Lovre and Vesenjak, Matej and Kodvanj, Janoš and Domazet, Željko (2014) Validacija numeričkog modela primjenom metoda digitalne korelacije slike i termografije. = Validation of Numerical Model by Means of Digital Image Correlation and Thermography. In: 6. susret hrvatskog društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Frkonja, Dina (2018) Automatska montaža prijenosnog mehanizma protupožarne zaklopke. = Automatic assembly of a fire damper transmission mechanism. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Fumić, Ivan (2015) Suvremeni rezni alati za obradu provrta. = Modern cutting tools for making holes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Fuš, Hinko (2017) Prototip 3D pisača s paralelnom kinematičkom strukturom. = Prototype of 3D printer with parallel kinematics. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Staroveški, Tomislav.

Fuš, Hinko (2018) Utjecaj odvođenja čestica na aksijalnu silu pri bušenju kamena. = The influence of chip evacuation on axial force at stone drilling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

G

Gadžić, Andrea (2016) Numerička simulacija procesa spreja i analiza utjecaja koeficijenata modela raspadanja goriva. = Numerical simulation of spray process and parametrisation of the atomisation model coefficients. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vujanović, Milan.

Gadžić, Andrea (2018) Udarna oštećenja višeslojnih kompozitnih konstrukcija pri malim brzinama. = Low velocity impact damage in laminated composite structures. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ivančević, Darko.

Gajšek, Brigita and Đukić, Goran and Opetuk, Tihomir (2015) Review of Ergonomic solutions to Protect From Injuries of Lower Back in Case of Forklifts Drivers. = Review of Ergonomic solutions to Protect From Injuries of Lower Back in Case of Forklifts Drivers. In: Management of Technology – Step to Sustainable, 10.-12.06.2015., Brela, Hrvatska.

Galić, Iva (2015) Kemijska analiza i metalografsko ispitivanje martenzitnih nehrđajućih čelika. = Chemical analysis and nictallographic examination of martensitic stainless steel welded joint. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Galić, Iva (2016) Svojstva i primjena piezoelektričnih keramika. = Properties and application of piezoelectric ceramics. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Galić, Ivica and Tomičević, Zvonimir and Tonković, Zdenko (2011) Fatigue testing of cast steel GP240GH. = Fatigue testing of cast steel GP240GH. In: International Conference of Engineering Against Fracture /, 22-24.06.2011, Mikonos, Grčka.

Galić, Ivica and Vučković, Krešimir and Tonković, Zdenko (2010) Nonlinear numerical analysis of two-way globe valve housing. = Nonlinear numerical analysis of two-way globe valve housing. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (1). pp. 67-74. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Galović, Antun (2010) Analiza denokretnog reverzibilnog ciklusa s promjenljivom temperaturom ogrjevnog toplinskog spremnika. = EGE : energetika, gospodarstvo, ekologija, etika, 1/2010. pp. 132-135. ISSN 1330-0628. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Galović, Antun and Ferdelji, Nenad and Mudrinić, Saša (2010) Entropy generation and exergy efficiency in adiabatic mixing of nitrogen and oxygen streams of different temperatures and environmental pressures. = Entropy generation and exergy efficiency in adiabatic mixing of nitrogen and oxygen streams of different temperatures and environmental pressures. Strojniški Vestnik/Journal of Mechanical Engineering, 56 (12). pp. 817-822. ISSN 0039-2480. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2010). Točan broj autora: 3.

Galović, Antun and Ferdelji, Nenad and Mudrinić, Saša (2010) Izračunavanje specifične topline isparivanja vode korištenjem Clausius - Clayperonove jednadžbe. = Calculation of specific vaporization heat of water using the clausius - Clayperon equation. Strojarstvo, 52 (3). pp. 343-348. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Galović, Antun and Virag, Zdravko and Živić, Marija and Holik, Mario (2010) Eksergijska efikasnost procesa potpunog izgaranja zasićenih ugljikovodika. = Exergetic efficiency of the complete combustion process of some of the hydrocarbons. In: 8. skup o prirodnom plinu, toplini i vodi, 1. međunarodni skup o prirodnom plinu, toplini i vodi, 29.09.-01.10.2010., Osijek; Croatia.

Galović, Antun and Živić, Marija and Holik, Mario (2011) Analiza određivanja ogrjevnih vrijednosti goriva pri potpunom izgaranju parafinskih ugljikovodika. = Determination Analysis of Heating Values by Complete Combustion of Hydrocarbons. In: 9. Skup o prirodnom plinu, toplini i vodi / 2.Međunarodni skup o prirodnom plinu, toplini i vodi, 28.- 30. 9. 2011, Osijek, Hrvatska.

Galović, Antun and Živić, Marija and Zmaić, Željko and Holik, Mario (2012) Application of the lumped capacitance method for the cooling of vertical plate immersed in water. = Application of the lumped capacitance method for the cooling of vertical plate immersed in water. In: 7th International Congress of Croatian Society of Mechanics, 22-25. 05. 2012, Zadar, Hrvatska.

Galović, Jurica (2017) Numeričko modeliranje procesa zavarivanja. = Numerical modelling of welding process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Galović, Jurica (2015) Sustavi automatski vođenih vozila. = Automatic guided vehicle systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Garašić, Ivica and Jurica, Maja (2016) Utjecaj zaštitnih plinova na oblik spoja pri MIG/MAG zavarivanju CrNi čelika. = Influence of shielding gas on joint geometry at MIG/MAG welding of Cr - Ni steels. In: 41. Međunarodna konferencija HDTZ, Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Jurica, Maja and Tomić, Tanja and Čolić, Luka and Babić, Nikola (2015) Optimizacija sastava aktivacijskog premaza za A – TIG navarivanje. = Optimization of the A – TIG bead on plate welding flux composition. In: 8. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SB 2015. “ SUVREMENI PROIZVODNI POSTUPCI , OPREMA I MATERIJALI ZA ZAVARENE KONSTRUKCIJE I PROIZVODE”, Slavonski Brod, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan (2011) Specifičnosti i primjena plazma zavarivanja. = Specific issues and application of plasma welding. In: 6. Međunarodno znanstveno-stručno savjetovanje SBZ 2011, Slavonski Brod, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan and Barun, Trpimir (2012) Matematičko modeliranje pojave hladnih pukotina pri mokrom podvodnom zavarivanju. = mathematical modeling of cold crack appearance during underwater wet welding. In: IV. Savjetovanje o morskoj tehnologiji, Rijeka, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan and Pacak, Miroslav (2010) Analysis of Underwater Repair Technology on the Jack-Up Platform Spud Can. = Analysis of Underwater Repair Technology on the Jack-Up Platform Spud Can. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 61 (2). pp. 153-160. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 4.

Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan and Tomić, Tanja and Glogović, Zlatko (2013) Primjena izmjenične struje kod mag navarivanja legure inconel 625. = Application of alternating current for mag cladding of inconel 625. In: 7. Međunarodno znanstveno-stručno savjetovanje SBZ 2013, Slavonski Brod, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2014) Analiza prijenosa metala pri MAG CBT zavarivanju. = Metal transfer analysis during MAG CBT welding. Zavarivanje, 57 (3/4). pp. 85-92. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2014) Analiza prijenosa metala pri MAG CBT zavarivanju. = Metal transfer analysis during MAG CBT welding. In: 40. Međunarodna konferencija HDTZ ZAVARIVANJE - WELDING 2014, Šibenik, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2015) Sensors and their classification in the fusion welding technology. = Sensors and their classification in the fusion welding technology. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (4). pp. 1069-1074. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Garašić, Ivica and Kralj, Slobodan and Kožuh, Zoran (2011) Suvremeni postupci MIG / MAG zavarivanja. = Modern processes of MIG / MAG welding. Zavarivanje, 54. pp. 61-67. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Garašić, Ivica and Kralj, Slobodan and Kožuh, Zoran and Barun, Trpimir (2010) Podvodno mokro zavarivanje duplex čelika. = Underwater wet welding of duplex steel. In: III Savjetovanje o morskoj tehnologiji, 30.11.-01.12.2009., Rijeka; Croatia.

Garašić, Ivica and Remenar, Maja and Kufrin, Tomislav (2014) Zavarivanje MIG/MAG promijenjivim polaritetom - posebnosti i primjena. = Variable polarity GMAW welding - specific issues and application. Zavarivanje, 57 (1/2). pp. 17-23. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Garašić, Ivica and Ćorić, Anto and Kožuh, Zoran and Samardžić, Ivan (2010) Occurence of cold cracks in welding of high - strength S960QL steel. = Occurence of cold cracks in welding of high - strength S960QL steel. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (3). pp. 327-335. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Garašić, Ivica and Ćorić, Anto and Kožuh, Zoran and Samardžić, Ivan (2010) Occurrence of cold cracks in welding of high-strength S960 QL steel. = Occurrence of cold cracks in welding of high-strength S960 QL steel. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (3). pp. 327-335. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 4.

Garbatov, Jordan and Jurišić, Paul and Parunov, Joško (2014) Comparative Analysis Based on Two Nonlinear Corrosion Models Commonly Used for the Prediction of Structural Degradation of Oil Tankers. = Comparative Analysis Based on Two Nonlinear Corrosion Models Commonly Used for the Prediction of Structural Degradation of Oil Tankers. Transactions of FAMENA, 38 (2). pp. 21-30. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 3.

Garbatov, Yordan and Parunov, Joško and Kodvanj, Janoš and Guedes Soares, Carlos (2016) Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning. = Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning. Marine Structures, 49. pp. 18-30. ISSN 0951-8339. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Garbatov, Yordan Y. and Guedes Soares, Carlos and Parunov, Joško (2014) Fatigue strength experiments of corroded small scale steel specimens. = Fatigue strength experiments of corroded small scale steel specimens. International Journal of Fatigue, 59. pp. 137-144. ISSN 0142-1123. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Garbatov, Yordan Y. and Guedes Soares, Carlos and Parunov, Joško and Kodvanj, Janoš (2014) Tensile strength assessment of corroded small scale specimens. = Tensile strength assessment of corroded small scale specimens. Corrosion Science, 85. pp. 296-303. ISSN 0010-938X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.

Gardonio, Paolo and Alujević, Neven (2010) Double Panel with Skyhook Active Damping Control Units for Control of Sound Radiation. = Double Panel with Skyhook Active Damping Control Units for Control of Sound Radiation. The Journal of the Acoustical Society of America, 128 (3). pp. 1108-1117. ISSN 0001-4966. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2010). Točan broj autora: 2.

Garković, Marin (2018) Konstrukcija kliješta za rezanje armature. = Bolt cutters design. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.

Gatin, Inno (2018) Multiskalno nelinearno i viskozno numericko modeliranje udarnih valnih opterecenja. = Multiscale nonlinear and viscous numerical modelling of wave impact loads. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Gatin, Inno and Jasak, Hrvoje and Vukčević, Vuko (2015) Validation and Verification of Steady Resistance KCS Simulations with Sinkage and Trim using Embedded Free Surface Method. = Validation and Verification of Steady Resistance KCS Simulations with Sinkage and Trim using Embedded Free Surface Method. In: Tokyo 2015 A Workshop on CFD in Ship Hydrodynamics, 2.-4.12.2015., Tokyo, Japan.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2016) Brze simulacije pomorstvenosti broda u OpenFOAM-u. = Rapid seakeeping simulations in OpenFOAM. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016, Split, Hrvatska.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2015) CFD Validation of a Container Ship in Calm Water and Head Seas. = CFD Validation of a Container Ship in Calm Water and Head Seas. In: 18th Numerical Towing Tank Symposium, 28.09.-30.09.2015., Cortona, Italija.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2014) Primjena Naval Hydro Paketa za Proračun Valnih Opterećenja. = Application of the Naval Hydro Pack for Wave Loads Assessment. In: Šesti susret Hrvatskoga društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje and Rusche, Henrik (2017) Enhanced coupling of solid body motion and fluid flow in finite volume framework. = Enhanced coupling of solid body motion and fluid flow in finite volume framework. Ocean engineering, 143. pp. 295-304. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Gayeski, Nicholas Thomas and Žakula, Tea and Armstrong, Peter Ross and Norford, Leslie Keith (2011) Empirical Modeling of a Rolling-Piston Compressor Heat Pump for Predictive Control in Low-Lift Cooling. = Empirical Modeling of a Rolling-Piston Compressor Heat Pump for Predictive Control in Low-Lift Cooling. In: Annual Conference of the American-Society-of-Heating-Refrigerating-and-Air-Conditioning-Engineers (ASHRAE), JUN 25-29, 2011, Montreal, CANADA.

Gazdek, Igor (2016) Uređaj za savijanje žice. = Device for wire bending. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Gašparec, Jurica (2017) Konstrukcija uređaja za prešanje limenki. = The design of a tin press machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Gašparec, Jurica (2015) Stroj za transport klipova kukuruza. = Machine for transporting corn cobs. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Gašparec, Luka (2016) Primjena planova pokusa u cilju procjene sastavnica mjerne nesigurnosti. = The application of design of experiments in estimating measurement uncertainty components. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Gašparović, Goran and Kilkiş, Şiir and Krajačić, Goran and Duić, Neven (2016) Campus and Community Micro Grids Integration of Building Integrated Photovoltaic Renewable Energy Sources - Case Study of Split 3 Area, Croatia - Part A. = Campus and Community Micro Grids Integration of Building Integrated Photovoltaic Renewable Energy Sources - Case Study of Split 3 Area, Croatia - Part A. Thermal science, 20 (4). pp. 1135-1145. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Gašparović, Goran and Krajačić, Goran and Duić, Neven and Baotić, Mato (2014) New Energy Planning Software for Analysis of Island Energy Systems and Microgrid Operations - H2RES Software as a Tool to 100% Renewable Energy System. = New Energy Planning Software for Analysis of Island Energy Systems and Microgrid Operations - H2RES Software as a Tool to 100% Renewable Energy System. Computer Aided Chemical Engineering, 33. pp. 1855-1860. ISSN 1570-7946. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Gašparović, Goran and Krajačić, Goran and Šare, Anamarija and Duić, Neven (2013) Advanced modelling of an electric vehicle module in the H2RES energy planning software. = Advanced modelling of an electric vehicle module in the H2RES energy planning software. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, 2013-09-22-27, Dubrovnik.

Gašparović, Goran and Prebeg, Pero and Krajačić, Goran and Duić, Neven (2014) Multi-objective Long-term Optimization of Energy Systems with High Share of Renewable Energy Resources. = Multi-objective Long-term Optimization of Energy Systems with High Share of Renewable Energy Resources. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, SEE SDEWES, Ohrid, 2014, 30.-04.07.2014., Ohrid, Makedonija.

Gecevska, Valentina and Lombardi, Franco and Čuš, Franc and Angelides, Demos and Anišić, Zoran and Veža, Ivica and Ćosić, Predrag and Popovska Vasilevska, Sanja (2010) PLM Concept – Innovative View in Engineering Education. = PLM Concept – Innovative View in Engineering Education. In: XVI Skup Trendovi razvoja: Bolonja 2010: stanje, dileme i perspektive, 01-04.03.2010., Kopaonik; Serbia.

Gerhardinger, David (2014) Remontni postupak zračnoga kompresora AK 50T1. = The overhaul process for the AK 50T1 air compressor. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Božić, Željko.

Geršić, Tomislav (2014) Kvantifikacija pojačivačkog efekta olovnih folija kod industrijske računalne radiografije. = Quantification of intensifying lead screens effect in industrial computed radiography. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Gečevska, Valentina and Chiabert, Paolo and Čuš, Franc and Anišić, Zoran and Veža, Ivica and Ćosić, Predrag (2011) Education in product lifecycle management new innovative and competitive knowledge concept. = Education in product lifecycle management new innovative and competitive knowledge concept. In: 3rd International Scientific Conference Management of Technology – Step to Sustainable Production, 8.-10.06.2011., Bol, Hrvatska.

Gečevska, Valentina and Lombardi, Franco and Čuš, Franc and Anišić, Zoran and Angelidis, Demos and Veža, Ivica and Popovska, Vasilevska and Ćosić, Predrag (2010) PLM-Product Lifecycle Management Strategy for Innovative and Competitive Business Environment. = PLM-Product Lifecycle Management Strategy for Innovative and Competitive Business Environment. In: Innovative Production Systems Key to Future Intelligent Manufaturing. Univerza v Mariboru, Maribor, pp. 193-208. ISBN 978-961-248-250-3

Gečevska, Valentina and Štefanić, Nedeljko and Veža, Ivica and Čuš, Franc (2011) Sustainable and Innovative Business Processes through Lean PLM Approach. = Sustainable and Innovative Business Processes through Lean PLM Approach. In: Industrijski sistemi, 14.-16.09.2011., Novi Sad, Srbija.

Gečevska, Valentina and Štefanić, Nedeljko and Veža, Ivica and Čuš, Franc (2012) Sustainable business solutions trough lean product lifecycle management. = Sustainable business solutions trough lean product lifecycle management. Acta Technica Corviniensis - Bulletin of Engineering, 5 (1). pp. 135-142. ISSN 2067-3809. Vrsta rada: Editorial. . Točan broj autora: 4.

Gjuras, Ivana (2018) Eksperimentalna analiza geotermalne dizalice topline u režimu grijanja. = Experimental analysis of ground source heat pump in heating mode. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Gjuretek, Dominik (2016) Tehnologija zavarivanja aluminijskih oklopljenih sabirnica. = Welding technology of aluminium armoured collectors. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Glogović, Zlatko and Kožuh, Zoran and Kralj, Slobodan (2014) Mathematical model for calculation of thickness of flame sprayed coating of aluminium on S235JR steel. = Mathematical model for calculation of thickness of flame sprayed coating of aluminium on S235JR steel. Materials Science and Technology (United Kingdom), 30 (6). pp. 676-687. ISSN 0267-0836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.

Glogović, Zlatko and Kožuh, Zoran and Kralj, Slobodan and Alar, Vesna and Stojanović, Ivan (2014) Properties of aluminium coatings produced using manual and robotized flame spraying processes. = Properties of aluminium coatings produced using manual and robotized flame spraying processes. International Journal of Materials Research, 105 (2). pp. 215-218. ISSN 1862-5282. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (1.6.2015.). Točan broj autora: 5.

Gložinić, Andrija (2019) Dvonožni hodajući robot pokretan umjetnim pneumatskim mišićima. = Two-legged walking robot driven by pneumatic artificial muscle. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Gložinić, Matija (2014) Projekt sustava ventilacije, grijanja i hlađenja proizvodne hale. = Design of ventilation, heating and cooling system for industrial plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Glumac, Milan (2016) Konstrukcija uređaja za prijenos tereta kod bepilotnih letjelica. = Design of a device for delivery drone cargo manipulation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Godec, Damir and Kramarić, Ines and Šercer, Mladen (2012) Application of reverse engineering in the development of polymer products. = Application of reverse engineering in the development of polymer products. In: International Conference on Innovative Technologies, IN-TECH 2012, Rijeka, Hrvatska.

Godec, Damir and Krsnik, Igor and Šercer, Mladen (2010) Od ideje do gotovoga polimernog proizvoda. = From idea to final polimer product. Polimeri : časopis za plastiku i gumu, 31 (2). pp. 71-76. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Godec, Damir and Pilipović, Ana and Šercer, Mladen (2010) Application of Rapid Prototyping in Polymer Product Development - Case Studies. = Application of Rapid Prototyping in Polymer Product Development - Case Studies. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Velika Gorica; Slovenia.

Godec, Damir and Pilipović, Ana and Šercer, Mladen (2010) Application of Rapid Prototyping in Polymer Product Development - Case Studies. = Application of Rapid Prototyping in Polymer Product Development - Case Studies. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Velika Gorica, Slovenija.

Godec, Damir and Radoš, Ivan and Šercer, Mladen (2015) Performance comparison of low - budget 3D printers. = Performance comparison of low - budget 3D printers. In: Regional Conference Polymer Processing Society Graz 2015, PPS2015, Graz, Austrija.

Godec, Damir and Raos, Pero and Šercer, Mladen (2013) Importance of Rapid Prototyping in Polymer Product Development. = Importance of Rapid Prototyping in Polymer Product Development. In: International Congress on Engineering and Technology ICET 2013, Dubrovnik, Hrvatska.

Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2012) Energy efficient injection moulding of polymers. = Energy efficient injection moulding of polymers. Acta Technica Corviniensis, 5 (1). pp. 103-108. ISSN 2067-3809. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2011) Energy efficient injection moulding of polymers. = Energy efficient injection moulding of polymers. In: 3rd International Scientific Conference Management of Technology - Step to Sustainable Production, 08-10.06.2011, Bol, Hrvatska.

Godec, Damir and Vidović, Ivan and Rujnić-Sokele, Maja (2014) Optimization of low budget 3D printing parameters. = Optimization of low budget 3D printing parameters. In: 5th International Conference on additive Technologies - iCAT 2014, 15-17.10.2014., Beč, Austrija.

Godec, Damir and Vidović, Ivan and Šercer, Mladen (2015) Optimiranje parametara niskobudžetnog 3D tiskanja. = Parameters optimization of low - cost 3D printing. Tehničke znanosti : glasnik Akademije tehničkih znanosti Hrvatske, 19 (1). pp. 3-8. ISSN 1330-7207. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Godec, Damir and Šercer, Mladen (2015) Aditivna proizvodnja. = Additive manufacturing. Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-26-6

Godec, Damir and Šercer, Mladen and Pilipović, Ana (2010) Application of Rapid Prototyping in Polymer Product Development - Case Studies. = Application of Rapid Prototyping in Polymer Product Development - Case Studies. Annals of DAAAM for 2010 & proceedings of the 21st International DAAAM Symposium, 21 (1). pp. 211-212. ISSN 1726-9679. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Gojanović-Rakić, Matej (2018) Otpornost subfosilnog hrasta na abrazijsko trošenje. = The abrasive wear resistance of subfossil oak wood. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Gojo, Miroslav and Baršić, Gorana and Grekulović, Vesna and Rajčić-Vujasinović, Mirjana and Stanković, Velizar (2014) Nickel-Tio2 composite coatings-surface characterization. = Nickel-Tio2 composite coatings-surface characterization. In: MATRIB 2014, 26. - 28. 06. 2014., Vela Luka, Htvatska.

Golubić, Dino (2018) Eksperimentalni model prirodne ventilacije zgrade u urbanoj sredini. = Experimental model of building natural ventilation in urban environment. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje.

Golubić, Dino (2016) Utjecaj položaj ruku na aerodinamičke karakteristike skijaša letača. = Aerodynamic characteristics of ski jumper influenced by position of his arms. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje.

Golubić, Mario (2018) Usporedna analiza zavarenih spojeva izrađenih konvencionalnim MAG i D-Arc postupkom. = Comparative analysis of welded joints produced by conventional MAG and D-Arc process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Goniva, Christoph and Tuković, Željko and Feilmayr, Christoph and Pirker, Stefan (2010) Towards efficient simulation of off-gas scrubbing by a hybrid Eulerian-Lagrangian model. = Towards efficient simulation of off-gas scrubbing by a hybrid Eulerian-Lagrangian model. Progress in Computational Fluid Dynamics, 10 (5-6). pp. 265-275. ISSN 1468-4349. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 4.

Gorički, Danijel (2018) Konstrukcija diferencijalnog prijenosnika. = Design of differential. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.

Gorupić, Dario (2019) CBT zavarivanje pocinčanih limova. = CBT welding of zinc coated steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Gotovac, Danijel (2019) Projektiranje i implementacija proporcionalno-integracijsko-derivacijskog regulatora za proces s aperiodskom dinamikom. = Design and implementation of proportional-integral-derivative controller for a process with aperiodic dynamic. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.

Gotvald, Dražen (2015) Zelena logistika u naftovodnom sustav. = Green logistics in oil pipeline system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Govedić, Klemen (2015) Regulacija hidrauličkog servosustava pomoću ugradbenog uređaja NI myRIO. = Control of a hydraulic system using the embedded device NI mvRIO. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Grabar, Igor (2018) Numerička simulacija kompozitne kobilice. = Numerical simulation of composite keel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.

Grabić, Ivan (2018) Određivanje mehaničkih svojstava polimernih materijala dobivenih 3D ispisom. = Determination of mechanical properties of 3D printed polymer materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Gracin, Roko (2019) Konstrukcija platforme za natjecateljsko ronjenje na dah. = Design of competition freediving platform. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.

Gradečak, Tomislav (2014) Simulacijski model proizvodnog procesa. = Simulation model of production process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Grbac, Alberto (2018) Izrada interferencijskog sustava za umjeravanje valne duljine lasera. = Design of interferometric system for laser wavelength calibration. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Katić, Marko.

Grbac, Mate (2018) Numerička analiza izlaznog vratila mjenjača. = Numerical analysis of the gearbox output shaft. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Grbić, Šime (2019) Projektiranje i upravljanje vozilom pogonjenim stlačenim zrakom. = Design and control of a compressed air powered vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Grd, David (2019) D-arc zavarivanje čimova velikih debljina. = D-arc welding of thick steel plates. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Grdić, Alen (2015) Moderni trokoordinatni mjerni sustavi. = Modern coordinate measurement systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Grdić, Alen (2016) Utjecaj prilagodbe modela podacima dimenzionalnih mjerenja kod računalne tomografije. = The impact of data fitting on dimensional computed tomography measurements. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Gredelj, Matea (2018) Mrežni repozitorij digitalnih slika i video uradaka. = The network repository of digital images and video clips. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Gregorić, Domagoj (2017) Projekt grijanja stambene zgrade sustavom s dizalicom topline. = Design of heating system with heat pump for residential building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Gregurić, Petar (2017) Optimizacija procesa izmjene alata. = Tool changes process optimization. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Gregurić, Petar (2018) Vitka i digitalna transformacija proizvodnih procesa. = Lean and digital transformation of manufacturing processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Grgec, Karlo (2018) Projektiranje kolica za odlaganje reznog alata. = Design of the trolley for disposal of cutting tools. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Grgec Bermanec, Lovorka and Zvizdić, Davor (2015) Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories. = Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories. International Journal of Metaology and Quality Engineering, 6 (3). 307-p1. ISSN 2107-6839. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Grgec Bermanec, Lovorka and Zvizdić, Davor (2011) Pressure Intercomparison in Gas Medium Organized by HMI/FSB-LPM and CROLAB KUL. = Pressure Intercomparison in Gas Medium Organized by HMI/FSB-LPM and CROLAB KUL. In: 4th International Conference Laboratory Competence, 12-15.10.2011., Cavtat-Dubrovnik ; Hrvatska.

Grgec Bermanec, Lovorka and Zvizdić, Davor and Praštalo, Nikola (2012) Interlaboratory comparison in the range from 0 to 2 MPa for Croatian accredited laboratories. = Interlaboratory comparison in the range from 0 to 2 MPa for Croatian accredited laboratories. In: CAFMET 2012 -4th International Metrology Conference, 23.-27.4.2012., Marrakech, Maroko.

Grgec Bermanec, Lovorka and Ćalušić, Luka (2015) Interlaboratory Comparison of Pressure Gauges Calibration in the range from 0 to 140 MPa for Croatian Accredited Laboratories. = Interlaboratory Comparison of Pressure Gauges Calibration in the range from 0 to 140 MPa for Croatian Accredited Laboratories. In: Laboratory Competence 2015, 21-24.10.2015., Zadar, Hrvatska.

Grgić, Bruno (2017) Algoritam za automatsku lokalizaciju markera pacijenta u volumetrijskim snimkama. = Algorithm for automated localization of patient markers in volumetric images. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Grgić, Bruno (2015) Praćenje kontura pomoću robota. = Robotic contour following. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Grgić, Domagoj (2016) Konstrukcijsko rješenje varijatora s konusnom i tanjurastom tarenicom. = Design solution of CVT with paring of conus and flat plate. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.

Grgić, Domagoj (2019) Stroj za namatanje izolacijskih kapa transformatora. = Machine for winding paper insulation on angle rings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škec, Stanko.

Grgić, Ivan (2015) Troškovno optimalna analiza energetske učinkovitosti stambene zgrade. = Cost-optimal analysis of residential building energy efficiency. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Grgić, Martina (2016) Igračka za razvijanje kognitivnih vještina. = Toy for developing of cognitive skills. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario and Kuterovac Jagodić, Gordana.

Grgurač, Ivan (2015) Digitalizacija energetskih instalacija južne zgrade Fakulteta strojarstva i brodogradnje. = Digitalization of south building energy installations of Faculty of Mechanical Engineering. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Grgurač, Ivan (2016) Primjena standarda ISO 55000 u upravljanju imovinom. = The appliaction of ISO 55000 standard in asset management. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Grilec, Hrvoje (2015) Ergonomske značajke viličara. = Ergonomic characteristics of forklifts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Grilec, Hrvoje (2016) Simulacijski model proizvodnje papirne ambalaže. = Simulation model of paper packaging production. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Grilec, Krešimir (2014) Inženjerstvo materijala na strojarskim fakultetima u RH. = Materials engineering on faculties of mechanical engineering in Republic of Croatia. In: Međunarodna stručna konferencija ME4CATALOGUE, Slavonski brod, Hrvatska.

Grilec, Krešimir (2013) Lijevane bronce drevnih civilizacija. = Cast bronze of ancient civilizations. In: 13th International Foundrymne Conference, Opatija, Hrvatska.

Grilec, Krešimir and Bojanić, Vedran (2012) Ponovljivost ispitivanja svojstava apsorpcije energije aluminijske pjene. = Reproducibility of energy absorption properties of aluminium foams. Tehnički glasnik, 6 (2). pp. 183-186. ISSN 1846-6168. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Grilec, Krešimir and Bojanić, Vedran (2012) Reproducibility of aluminum foams energy absorption. = Reproducibility of aluminum foams energy absorption. In: 12th International foundrymen conference, Opatija, Hrvatska.

Grilec, Krešimir and Halavanja, Aleksandar and Marić, Gojko (2013) Savijanje čeličnih profila punjenih aluminijskom pjenom. = Bending of steel profiles filled with aluminum foam. In: International Conference on Materials, Tribology, Recycling MATRIB 2013, Vela Luka, Hrvatska.

Grilec, Krešimir and Hrabrić, Ivan and Marić, Gojko (2010) Apsorpcija energije ojačanih aluminijskih pjena. = Energy Absorption of Reinforced Aluminium Foams. In: 1st International Conference Mechanical Technologies and Structural Materials, 21-22.10.2010., Split; Croatia.

Grilec, Krešimir and Ivušić, Vinko (2013) Kratka povijest tribologije. = A brief history of tribology. In: International Conference on Materials, Tribology, Recycling MATRIB 2013, Vela Luka, Hrvatska.

Grilec, Krešimir and Jakovljević, Suzana and Novosel, Dean (2015) Analiza trošenja valjaka za mjerenje sile. = Wear analysis of roller brake tester. In: International Conference MATRIB 2015, Vela Luka, Hrvatska.

Grilec, Krešimir and Jakovljević, Suzana and Prusac, Denis (2010) Erosion of ductile cast iron with quartz particles. = Erosion of ductile cast iron with quartz particles. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (1). pp. 17-22. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.

Grilec, Krešimir and Krapinec, Zvonimir (2010) Tlačno ispitivanje aluminijskih pjena različitim brzinama tlačenja. = Compression testing of aluminium foams with different displacement rate. In: Međunarodno savjetovanje o materijalima, tribologiji, recikliranju, 23-25.06.2010., Vela Luka; Croatia.

Grilec, Krešimir and Kumić, Ivan and Ćurković, Lidija and Baršić, Gorana (2010) The erosion of AIN ceramics by sand particles. = The erosion of AIN ceramics by sand particles. In: 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection, 10-12.06.2010., Opatija; Croatia.

Grilec, Krešimir and Marić, Gojko and Alar, Željko (2013) Compression of aluminium foams with different strain rate. = Compression of aluminium foams with different strain rate. In: 3rd International Conference on Mechanical Technologies and Structural Materials, Split, Hrvatska.

Grilec, Krešimir and Marić, Gojko and Jakovljević, Suzana (2010) A study on energy absorption of aluminium foam. = A study on energy absorption of aluminium foam. Berg- und Huettenmaennische Monatshefte., 155 (5). pp. 231-234. ISSN 0005-8912. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Jakovljević, Suzana and Primorac, Ivan (2014) Erozijsko trošenje nanostrukturiranih sol - gel tio2 prevlaka na nehrđajućem čeliku. = In: 40th International conference Welding 2014, 28-31.05.2014., Šibenik.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Jakovljević, Suzana and Rede, Vera (2014) Particle erosion of sol - gel TiO2 - ZrO2 films. = Particle erosion of sol - gel TiO2 - ZrO2 films. In: 4th international conference Mechanical technologies and structural materials, 25.-26.09.2014., Split, Hrvatska.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Jakovljević, Suzana and Rede, Vera (2014) Sliding wear of TiO2 sol - gel coating. = Sliding wear of TiO2 sol - gel coating. In: 18th international research/expert conference "Trends in the development of machinery and associated technology" TMT 2014, 10.-12.09.2014., Budimpešta, Mađarska.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Jakovljević, Suzana and Sakoman, Matija and Sladojević, Milan (2015) SEM - EDS Analysis of Composite Al2O3 - ZrO2 Ceramics Eroded with SiC Particles. = SEM - EDS Analysis of Composite Al2O3 - ZrO2 Ceramics Eroded with SiC Particles. Applied Mechanics and Materials, 729. pp. 27-31. ISSN 1662-7482. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Primorac, Ivan (2014) Nanošenje TiO2 sol-gel prevlaka na nehrđajući čelik. = Deposition of sol-gel TiO2 coatings on stainless steel. In: International Foundrymen Conference, Development and Optimization of the Castings Production Processes (14 ; 2014), 15.-16.05.2014., Opatija, Hrvatska.

Grinišin, Nazar (2017) Ispitivanje utjecaja bočnog nagiba na silu otpora trupa jedrilice klase Optimist. = Exploration of influence of roll angle on drag force of sail-boat class Optimist hull. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krizmanić, Severino.

Grlić, Danijel (2016) Mjerna sposobnost optičkog sustava za očitanje veličine otiska tvrdoće. = Measurement capability of an optical system for reading the hardness indentation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

Grlić, Danijel (2015) Produljenje trajnosti kalupa za tlačni lijev postupcima prevlačenja. = Extending of durability of molds for die-casting by the coating processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Grlić, Ilija (2014) Škarasta dizalica. = Electrical scissor lift. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Grozdanić, Maria (2019) Mjerenje brzine ultrazvuka u etalonskim pločicama tvrdoće. = Ultrasonic velocity measurements on reference hardness blocks. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Grozdek, Marino and Halasz, Boris and Ćurko, Tonko (2010) Development of a computer program for the simulation of ice-bank system operation, part II: Verification. = Development of a computer program for the simulation of ice-bank system operation, part II: Verification. International Journal of Refrigeration, 33 (8). pp. 1657-1669. ISSN 0140-7007. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2010). Točan broj autora: 3.

Grozdek, Marino and Lepoša, Leon and Brlek, Matija and Ćurko, Tonko (2011) Sustav hlađenja sa spremnikom hladne vode kao akumulatorom rashladnog učinka. = Cooling system with stratified chilled water thermal storage tank. In: Klima forum 2011. 3. forum o hlađenju, klimatizaciji i ventilaciji, 13-14.10.2011, Zadar, Hrvatska.

Grozdek, Marino and Ćurko, Tonko and Khodabandeh, Rahmatollah and Lundqvist, Per and Soldo, Vladimir (2010) Performance Comparison Of A Static Ice-Bank And Dynamic Ice Slurry Cool Thermal Energy Storage Systems. = Performance Comparison Of A Static Ice-Bank And Dynamic Ice Slurry Cool Thermal Energy Storage Systems. In: 9th IIR Gustav Lorentzen Conference on Natural Working Fluids (GL2010), 12.-14.04.2010, Sydney; Australia.

Groš, Josip and Balder, Damir and Ciglar, Damir and Math, Miljenko (2011) A comparison between the main cutting force of a turning center and that obtained by deform 3D software. = A comparison between the main cutting force of a turning center and that obtained by deform 3D software. In: International Scientific Conference on Production Engineering (13 ; 2011), 16-18.06.2011., Biograd, Hrvatska.

Grubić, Dominik (2016) Konstrukcija prihvata Dieselovog motora na hidrauličku kočnicu SCHENCK D400. = Design of mounting construction for implementation of Diesel engine on hydraulic dynamometer SCHENCK D400. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Grubić, Dominik (2018) Optimizacija usisnog i ispušnog sustava motora bolida Formula student. = Optimization of the intake and exhaust system of Formula student car engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Grubišić, Dominik (2017) Hibridno ORC postrojenje. = Hybrid ORC plant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Grubišić, Dominik (2019) Prediktivno upravljanje mikro energetskog sustava. = Predictive Control of Micro Power System. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Grubišić, Josip (2017) Otpornost na trošenje korozijski postojanih čelika. = Wear resistance of corrosion resistance steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Grubišić, Josip (2018) Promjena svojstava titanijeve legure Ti6Al4V nitriranjem i PACVD prevlačenjem. = Modifying the properties of titanium alloy Ti6Al4V applying nitriding and PACVD coating. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Gršeta, Ivan (2015) Mogućnost ostvarenja statusa povlaštenog proizvođača električne energije iz kogeneracije za TE-TO Zagreb. = The possibility of achieving the status of eligible producers of electricity from cogeneration for TE-TO Zagreb. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Gudlin, Mihael and Hegedić, Miro and Režek, Robert and Štefanić, Nedeljko (2016) Hospital Pharmacy Layout Optimisation Using Lean Management Principles. = Hospital Pharmacy Layout Optimisation Using Lean Management Principles. In: LEAN Spring Summit 2016, 31.5.-02.06.2016., Šibenik, Hrvatska.

Gudlin, Mihael and Hegedić, Miro and Štefanić, Nedeljko and Cajner, Hrvoje (2017) Development of Supplier and Staff Organization Model of Hospital Pharmacy. = Development of Supplier and Staff Organization Model of Hospital Pharmacy. In: 2nd International Scientific Conference LEAN Spring Summit 2017, 1.-2.6.2017., Šibenik, Hrvatska.

Guina, Vedran (2018) Utvrđivanje biomehaničkih zahtjeva za prijedlog naprave za vježbanje mišića ramenog zgloba. = Biomechanical requirements determination for design of shoulder joint muscles exercising device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Gujić, Ante (2015) Svrha proizvodnje i korištenja drvenog ugljena. = The purpose of the production and use of charcoal. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Guzović, Zvonimir (2010) Small Hydro Power Plants in Europe: Handbook on Required Administrative Procedures. = Small Hydro Power Plants in Europe: Handbook on Required Administrative Procedures. Faculty of Mechanical Engineering and Naval Architecture, Zagreb, -. ISBN 978-953-6313-76-1

Guzović, Zvonimir and Antoniazzi, Marco and Garofalo, Elizabetta and Alterach, Julio and Peviani, Maximo and Maradin, Marinko and Gunnar Dahlhaug, Ole and Christoforidou, Lilly and Schlager, Otmar (2011) Lessons Learned from Project SMART. = Lessons Learned from Project SMART. In: The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.

Guzović, Zvonimir and Bačelić-Medić, Zlatko and Rašković, Predrag (2012) Effect of Working Fluids on Organic Rankine Cycle for Geothermal Power Plant „Lunjkovec-Kutnjak“. = Effect of Working Fluids on Organic Rankine Cycle for Geothermal Power Plant „Lunjkovec-Kutnjak“. In: 7th Conference on Sustainable Development of Energy, Water and Environment Systems, 01-06.07.2012., Ohrid, Makedonija.

Guzović, Zvonimir and Blatarić, Zoran and Rašković, Predrag (2013) The Comparision of a Basic and a Dual‐Pressure Organic Rankine Cycles (ORC): Geothermal Power Plant Velika Ciglena Case Study. = The Comparision of a Basic and a Dual‐Pressure Organic Rankine Cycles (ORC): Geothermal Power Plant Velika Ciglena Case Study. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.

Guzović, Zvonimir and Jukić, Perica and Lončar, Dražen (2011) Determination of the Operating Regimes of CHP Turbines with Stage-wise Heating of District Heating System Water. = Determination of the Operating Regimes of CHP Turbines with Stage-wise Heating of District Heating System Water. In: World Renewable Energy Congress 2011 - Sweden, 08.-13.05.2011., Linkoping, Švedska.

Guzović, Zvonimir and Klun, Mario and Rašković, Predrag (2013) Waste Heat Recovery of Internal Combustion Engine by Organic Rankine Cycle. = Waste Heat Recovery of Internal Combustion Engine by Organic Rankine Cycle. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.

Guzović, Zvonimir and Kovačić, Krešimir and Mihalić, Tihomir (2012) Non-stationary temperature stresses in the industrial steam turbine rotor. = Non-stationary temperature stresses in the industrial steam turbine rotor. In: The 16th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” - TMT 2012, 10.-12.09.2012., Dubai, Ujedinjeni Arapski Emirati.

Guzović, Zvonimir and Lončar, Dražen and Ferdelji, Nenad (2010) Possibilities of electricity generation in the Republic of Croatia by means of geothermal energy. = Possibilities of electricity generation in the Republic of Croatia by means of geothermal energy. Energy, 35 (8). pp. 3429-3440. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2010). Točan broj autora: 3.

Guzović, Zvonimir and Majcen, Boris (2010) Mogućnosti proizvodnje električne energije u Republici Hrvatskoj iz srednjotemperaturnih geotermalnih izvora. = Possibilities of Electric Energy Generation in Croatia from Middle-Temperature Geothermal Sources. In: 9. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja i 4. međunarodni forum o obnovljivim izvorima energije, 29.09.-01.10.2010., Dubrovnik; Croatia.

Guzović, Zvonimir and Martan, Boško and Majcen, Boris (2011) Possibilities of electricity generation in the Republic of Croatia by means of low temperature geothermal sources. = Possibilities of electricity generation in the Republic of Croatia by means of low temperature geothermal sources. In: Interklima 2011 - 21st. International Symposium on Heating, Refrigerating and Air Conditioning and 10th. Conference on Thermography, 07-08.04.2011., Zagreb, Republika Hrvatska.

Guzović, Zvonimir and Matijašević, Branimir (2010) Impact of national legal frameworks on increasing the implementation of small-scale hydro electricity plants (SHP) in Europe – experiences of SMART project. = Impact of national legal frameworks on increasing the implementation of small-scale hydro electricity plants (SHP) in Europe – experiences of SMART project. In: The 9th International Symposium Power and Process Plants and the 4th International Forum on Renewable Energy Sources, 29.09.-01.10.2010., Zagreb; Croatia.

Guzović, Zvonimir and Matijašević, Branimir and Mihalić, Tihomir (2011) Characteristics of Non-Stationary Thermal Stresses In the Low-Pressure Part of the Rotor. = Characteristics of Non-Stationary Thermal Stresses In the Low-Pressure Part of the Rotor. In: 15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” - TMT 2011, 12.-18.09.2011., Prag, Češka.

Guzović, Zvonimir and Rajčić, Ante and Mihalić, Tihomir (2012) Mogućnosti iskorištavanja energije vjetra u gradskim sredinama. = Possibilities of wind energy utilization in urban surroundings. In: 10th International Symposium Power and Process Plants and 5th International Forum on Renewable Energy Sources, 24.-26.10.2012., Rovinj, Hrvatska.

Guzović, Zvonimir and Rašković, Predrag and Blatarić, Zoran (2014) The comparision of a basic and a dual-pressure ORC (Organic Rankine Cycle): Geothermal Power Plant Velika Ciglena case study. = The comparision of a basic and a dual-pressure ORC (Organic Rankine Cycle): Geothermal Power Plant Velika Ciglena case study. Energy, 76. pp. 75-186. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Guzović, Zvonimir and Rašković, Predrag and Christoforidou, T. Lily (2012) Current Status of Small Hydropower Plants (SHP) Application in Southeast European Countries. = Current Status of Small Hydropower Plants (SHP) Application in Southeast European Countries. In: 7th Conference on Sustainable Development of Energy, Water and Environment Systems, 01-06.07.2012., Ohrid, Makedonija.

Guzović, Zvonimir and Rašković, Predrag and Cvetković, Svetislav (2011) Exergy Analysis of Electricity Generation by the Medium Temperature Geothermal Resources: Geothermal Power Plant Velika Ciglena Case Study. = Exergy Analysis of Electricity Generation by the Medium Temperature Geothermal Resources: Geothermal Power Plant Velika Ciglena Case Study. In: The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25.-29.09.2011., Dubrovnik, Hrvatska.

Guzović, Zvonimir and Sviderek, Stanislav and Mihalić, Tihomir (2010) Characteristics of non-stationary thermal stresses in the disc of the last turbine stage. = Characteristics of non-stationary thermal stresses in the disc of the last turbine stage. In: 14th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology - TMT 2010, 11-18.09.2010., Mediterranean Cruise, Mediterranean.

Guć, Luka (2016) Eksperimentalno određivanje karakteristika modela Pelton turbine. = Experimental research of the Pelton turbine model performance curves. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Górski, Piotr and Pospíšil, Stanislav and Kuznetsov, Sergeii and Tatara, Marcin and Marušić, Ante (2014) Investigation of Strouhal number of iced cable model of cable-supported bridges with respect to angle of wind attack. = Investigation of Strouhal number of iced cable model of cable-supported bridges with respect to angle of wind attack. In: 7th International symposium on environmental effects on building and people. Actions, influences, interactions, discomfort, 20-22.10.2014., Krakow, Poljska.

Górski, Piotr and Pospíšil, Stanislav and Kuznetsov, Sergeii and Tatara, Marcin and Marušić, Ante (2016) Strouhal number of bridge cables with ice accretion at low flow turbulence. = Strouhal number of bridge cables with ice accretion at low flow turbulence. Wind and structures, 22 (2). pp. 253-272. ISSN 1226-6116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 5.

H

Haas, Reinhard and Lettner, Georg and Auer, Hans and Duić, Neven (2013) The looming revolution: How photovoltaics will change electricity markets in Europe fundamentally. = The looming revolution: How photovoltaics will change electricity markets in Europe fundamentally. Energy, 57. pp. 38-43. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1(2013). Točan broj autora: 4.

Habulan, Marino (2016) Utjecaj nanopunila na mehanička svojstva polimernih kompozita. = Influence of nanoparticles on properties of polymer composite matrix. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Hadžistević, Miodrag and Matin, Ivan and Hodolić, Janko and Vukelić, Đorđe and Vukmirović, Srdjan and Godec, Damir and Nedić, Bogdan (2014) Rule base reasoning in the knowledge - based mould design system. = Rule base reasoning in the knowledge - based mould design system. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 21 (5). pp. 1143-1148. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.

Hadžić, Neven and Parunov, Joško and Pestelli, Carlo and Rudan, Smiljko and Senjanović, Ivo (2012) Review of Methods for Structure Born Noise Prediction on Ships. = Review of Methods for Structure Born Noise Prediction on Ships. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 63 (2). pp. 134-139. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). Točan broj autora: 5.

Hadžić, Neven and Senjanović, Ivo and Vladimir, Nikola (2011) Povratna krutost u hidroelastičnoj analizi pomorskih konstrukcija. = Restoring stiffness in the hydroelastic analysis of marine structures. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 62 (3). pp. 265-279. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.

Hadžić, Neven and Tomić, Marko and Senjanović, Ivo (2014) Harmonic loading of horizontal axis tidal turbines due to non-uniform stream profile. = Harmonic loading of horizontal axis tidal turbines due to non-uniform stream profile. Ocean Engineering, 91. pp. 196-207. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Hajdu, Ivan (2015) Primjena aktivacijskog premaza pri plazma zavarivanju austenitnih čelika. = Aplication of activation flux in plasam welding of austenitic steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Hammer, Vedran (2015) Procesni pristup tehnologiji 3D printanja. = Process aproach to 3D printing technology. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Haramina, Krunoslav (2018) Modeliranje i simulacija sinkronizacijskog sklopa automatske transmisije s dvostrukom spojkom. = Modelling and simulation of synchronizer for a dual clutch automatic transmission. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Haramina, Tatjana and Pilipović, Ana and Jelavić, Tomislav and Šolić, Tomislav (2011) Recikliranje otpada od diskontinuiranih E-staklenih vlakana u građevinskim materijalima. = Recycling of discontinuous E-glass fibers in construction materials. In: International conference on materials, tribology, recycling, 29.06 - 01.07.2011., Vela Luka, Hrvatska.

Hartman, Vanja and Kirac, Mislav and Zanki, Vlasta and Grozdek, Marino and Poletto, Davide and Ronchini, Chiara (2013) Energy Efficiency and Energy Management in Cultural Heritage. = Energy Efficiency and Energy Management in Cultural Heritage. United Nations Development Programme in Croatia, Zagreb, Hrvatska, -. ISBN 978-953-7429-47-8

Hasović, Zihnija and Ćosić, Boris and Omerbegović Arapović, Adisa and Duić, Neven (2015) Impact of new power investments up to year 2020 on the energy system of Bosnia and Herzegovina. = Impact of new power investments up to year 2020 on the energy system of Bosnia and Herzegovina. Thermal science, 19 (3). pp. 771-780. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 4.

Havoić, Danijela (2018) Mjerenje temperature u hladnomorskim spiljama. = Temperature measurements in sublittoral caves. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Hegedić, Miro (2010) Mapiranje toka vrijednosti. = Value stream mapping of production companies. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Hegedić, Miro (2017) Model upravljanja proizvodnjom integriranjem vitkoga i zelenoga menadžmenta. = Model of manufacturing management integrating lean and green management. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Hegedić, Miro and Opetuk, Tihomir and Đukić, Goran and Drašković, Hrvoje (2016) Life cycle assessment of power transformer-case study. = Life cycle assessment of power transformer-case study. In: Management of Technology – Step to Sustainable Production 2016, 01.-03.06.2016., Poreč, Croatia.

Heinonen, Martti and Zvizdić, Davor and Šestan, Danijel (2011) Intercomparison of the Dew-Point Temperature Realizations at LPM and MIKES in the Range from −70 ◦C to +20 ◦C. = Intercomparison of the Dew-Point Temperature Realizations at LPM and MIKES in the Range from −70 ◦C to +20 ◦C. International journal of thermophysics, 33 (8/9). pp. 1451-1457. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.

Heinonen, Martti and Zvizdić, Davor and Šestan, Danijel (2013) Report to the CCT on the Comparison EURAMET.T-K6.1 Bilateral comparison of the realisations of local dew/frost-point temperature scales in the range-70 degrees C to+20 degrees C Participants: HMI/FSB-LPM and MIKES Final. = Report to the CCT on the Comparison EURAMET.T-K6.1 Bilateral comparison of the realisations of local dew/frost-point temperature scales in the range-70 degrees C to+20 degrees C Participants: HMI/FSB-LPM and MIKES Final. Metrologia, 50. 03009-03010. ISSN 0026-1394. Vrsta rada: Editorial. Kvartili JCR: Q2(2013). Točan broj autora: 3.

Henč-Bartolić, Višnja and Bončina, Tonica and Jakovljević, Suzana and Panjan, Petar and Zupanič, Franc (2016) Damage caused by a nanosecond UV laser on a heated copper surface. = Damage caused by a nanosecond UV laser on a heated copper surface. Applied surface science, 378. pp. 357-361. ISSN 0169-4332. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.

Herceg, Stjepan (2019) Projekt sustava grijanja dizalicom topline. = Design of hetaing system with heta pump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Hermans, R.M. and Lazar, M and Jokić, Andrej and Gielen, R.H. (2011) On parameterized stabilization of networked dynamical systems. = On parameterized stabilization of networked dynamical systems. In: 18th IFAC World Congress 2011, 28.08.-02.09.2011., Milano, Italija.

Hermans, R.M. and Lazar, Mircea and Jokić, Andrej (2011) Distributed predictive control of the 7-Machine CIGRÉ power system. = Distributed predictive control of the 7-Machine CIGRÉ power system. In: 2011 American Control Conference, ACC 2011, 29.06.-01.07.2011., San Francisco, SAD.

Hermans, Ralph M. and Lazar, Mircea and Jokić, Andrej (2010) Almost decentralized Lyapunov-based nonlinear model predictive control. = Almost decentralized Lyapunov-based nonlinear model predictive control. In: 2010 American Control Conference, ACC 2010, 30.06.-02.07.2010., Baltimore, USA.

Hermans, Ralph M. and Lazar, Mircea and Jokić, Andrej (2013) Distributed Lyapunov-based MPC. = Distributed Lyapunov-based MPC. In: Distributed Model Predictive Control Made Easy. Intelligent Systems, Control and Automation: Science and Engineering (69). Springer, Dordrecht, pp. 225-241. ISBN 978-94-007-7006-5; 978-94-007-7005-8

Hermans, Ralph M. and Lazar, Mircea and Jokić, Andrej and Van Den Bosch, P.P.J. (2010) Almost decentralized model predictive control of power networks. = Almost decentralized model predictive control of power networks. In: 15th IEEE Mediterranean Electrotechnical Conference, MELECON 2010, 25-28.04.2010., Valletta, Malta.

Hihlik, Mislav (2018) Upravljanje umjereno-hibridiziranim vozilom paralelne konfiguracije P2. = Control of a mild hybrid electric vehicle given in parallel configuration P2. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Hild, François and Bouterf, Amine and Chamoin, Ludovic and Leclerc, Hugo and Mathieu, Florent and Neggers, Jan and Pled, Florent and Tomičević, Zvonimir and Roux, Stéphane (2016) Toward 4D mechanical correlation. = Toward 4D mechanical correlation. Advanced Modeling and Simulation in Engineering Sciences, 3 (17). pp. 1-26. ISSN 2213-7467. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 9.

Hlapčić, Filip (2018) Rashladnik kapljevine za hlađenje u procesnoj industriji. = Chiller for cooling in process industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Hlebec, Hrvoje (2015) Ovjesna dizalica na konzolnoj stazi. = Hoist on the console craneway. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Hlevnjak, Alen (2016) Točkasto elektrootporno zavarivanje raznorodnih čelika. = Resistance spot welding of dissimilar steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Hlevnjak, Alen (2015) Točkasto elektrootporno zavarivanje visokolegiranih nehrđajućih čelika. = Spot resistance welding of high alloyed stainless steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Hodja, Tomislav (2015) Projektiranje i regulacija sustava kuglice na ploči pokretanog pneumatskim mišićima. = Design and control of a ball-on-plate system powered by pneumatic muscles. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Hohšteter, Denis (2018) Vitki i pametni proizvod. = Lean and smart product. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Hoić, Matija (2007) Analiza pouzdanosti motorne kosilice. = Lawn mower reliability analysis. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Hoić, Matija and Deur, Joško and Herold, Zvonko and Ivanović, Vladimir (2012) Modeling of dual dry clutch thermal dynamics. = Modeling of dual dry clutch thermal dynamics. In: 1st Biannual International Conference on Powertrain Modelling and Control (PMC2012), 04-06.09.2012., West Yorkshire, United Kingdom.

Hoić, Matija and Herold, Zvonko and Kranjčević, Nenad and Deur, Joško and Ivanović, Vladimir (2013) Experimental characterization and modeling of dry dual clutch thermal expansion effects. = Experimental characterization and modeling of dry dual clutch thermal expansion effects. SAE International Journal of Passenger Cars - Mechanical Systems, 6 (2). pp. 775-785. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Hoić, Matija and Hrgetić, Mario and Deur, Joško (2016) Design of a pin-on-disc-type CNC tribometer including an automotive dry clutch application. = Design of a pin-on-disc-type CNC tribometer including an automotive dry clutch application. Mechatronics, 40. pp. 220-232. ISSN 0957-4158. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.

Hoić, Matija and Jokić, Andrej and Ščap, Dragutin (2013) Determination of Pareto frontier for multi-objective optimization problem. = Determination of Pareto frontier for multi-objective optimization problem. Transactions of FAMENA, 37 (2). pp. 15-28. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Hoić, Matija and Kranjčević, Nenad and Deur, Joško (2014) Experimental characterization of dry dual clutch elastic components with application to clutch modelling. = Experimental characterization of dry dual clutch elastic components with application to clutch modelling. In: Powertrain Modelling and Control Conference, PMC 2014, 10-12.09.2014., Bradford, Ujedinjeno Kraljevstvo.

Hoić, Matija and Kranjčević, Nenad and Herold, Zvonko and Deur, Joško and Ivanović, Vladimir (2014) Experimental characterization and modeling of dry dual clutch wear. = Experimental characterization and modeling of dry dual clutch wear. SAE International Journal of Passenger Cars - Mechanical Systems, 7 (1). pp. 326-337. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Hoić, Matija and Kranjčević, Nenad and Herold, Zvonko and Deur, Joško and Ivanović, Vladimir (2018) Modeling of dry dual-clutch axial dynamics. = Modeling of dry dual-clutch axial dynamics. Proceedings of the institution of mechanical engineers part d-journal of automobile engineering, 232 (2). pp. 220-237. ISSN 0954-4070. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2017). Točan broj autora: 5.

Hojsak, Dario (2017) Postupci utvrđivanja degradacije/starenja motornih ulja. = Procedures for determining the degradation/aging of engine oils. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Holik, Mario and Janković, Zvonimir and Končić, Ružica and Živić, Marija and Galović, Antun (2012) Numerička i termografska analiza oštećenosti izolacije toplovoda. = In: 10th Natural Gas, Heat and Water Conference/ 3rd International Natural Gas, Heat and Water Conference, 26-28.09.2012., Osijek, Hrvatska.

Holik, Mario and Krizmanić, Severino and Ferdelji, Nenad and Živić, Marija and Galović, Antun (2013) Zagrijavanje vode prirodnom konvekcijom pomoću horizontalno uronjenog grijača. = Water heating by natural convection with horizontal immersed heater. In: 5. susret Hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.

Holik, Mario and Zmaić, Željko and Krizmanić, Severino (2012) Cooling of water in a cavity by natural convection – comparison of numerical results. = Cooling of water in a cavity by natural convection – comparison of numerical results. In: 4th International Scientific and Expert Conference TEAM 2012, 17-19. 09. 2012., Slavonski Brod, Hrvatska.

Holik, Mario and Zmaić, Željko and Živić, Marija and Galović, Antun (2011) Numerički model termodinamičkog procesa u izmjenjivaču topline. = Numerical model of the thermodynamic process in the heat exchanger. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.

Holik, Mario and Živić, Marija and Galović, Antun (2013) Thermographic quantitative analysis of temperature field around the moving heat source. = Thermographic quantitative analysis of temperature field around the moving heat source. In: Interklima 2013, 11.4.2013., Zagreb, Hrvatska.

Holik, Mario Janković and Galović, Antun (2013) Teorijska analiza optimalnog režima rada Braytonova ciklusa. = Theoretical analysis of the optimal operation mode of Brayton cycle. In: 11th Natural gas, Heat and Water Conference/ 4th International Gas, Heat and Water Conference, 25-27.09.2013., Osijek, Hrvatska.

Horgas, Vedran (2017) Ispitivanje mogućnosti primjene nitriranja tvrdog metala u plazmi. = Investigation into possibilities for application of plasma nitriding of hard metals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Horina, Alen (2014) Trigeneracijsko postrojenje sa Strilingovim motorom pogonjeno biogorivima. = Stirling engine trigeneration fuelled by biofuels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.

Hornung, Krunoslav and Stojkov, Marinko and Hnatko, Emil and Kljajin, Milan and Opalić, Milan (2011) Ušteda prirodnog plina uporabom sunčeve energije. = Saving natural gas using solar energy. In: 2nd International Natural Gas , Heat and Water Conference., 28-30.9.2011., Osijek, Hrvatska.

Horvat, Ivan (2014) Dinamička simulacija potrošnje primarne energije u stambenoj zgradi. = Dynamic simulation of primary energy consumption in residential building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Horvat, Ivan and Dović, Damir (2016) Dynamic method for calculating energy need in HVAC systems. = Dynamic method for calculating energy need in HVAC systems. Transactions of FAMENA, 40. pp. 47-62. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 2.

Horvat, Ivan and Dović, Damir (2016) Dynamic modeling approach for determining buildings technical system energy performance. = Dynamic modeling approach for determining buildings technical system energy performance. Energy conversion and management, 125. pp. 154-165. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.

Horvat, Ivica (2008) Istraživanje pouzdanosti tehničkih sustava metodom stabla kvara. = Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.

Horvat, Josip (2015) Razvoj robotskog stereotaktičkog okvira za primjenu u neurokirurgiji. = Development of robotic stereotactic frame for application in neurosurgery. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Horvat, Krunoslav and Mišković, Mato and Mišković, Ivan and Bonačić, Mišo and Korlević, Darko and Kalinić, Maro and Stipišić, Leo and Goga, Ivica and Kurtela, Marin and Mikjel, Gabrijela and Kosić, Dragan and Bakarić, Vedran and Kuljača, Ognjen and Eškinja, Zdravko (2013) Zamjena sustava turbinske regulacije proizvodne jedinice B HE Dubrovnik. = Refurbishment of the turbine governing system of power unit B HPP Dubrovnik. In: 11.savjetovanje HRO CIGRÉ, 10.–13.11.2013., Cavtat, Hrvatska..

Horvat, Krunoslav and Pintarić, Tomislav and Mišković, Ivan and Jagec, Josip and Korlević, Darko and Barulek, Dejan and Stipišić, Leo and Srpak, Dragutin and Kurtela, Marin and Bakarić, Vedran and Eškinja, Zdravko (2013) Zamjena dijela sustava turbinske regulacije na HE Čakovec. = Refurbishment of part of the turbine governing system of HPP Čakovec. In: 11.savjetovanje HRO CIGRÉ, 10.–13.11.2013., Cavtat, Hrvatska..

Horvat, Marko (2015) Izračun h-Q karakteristike srčane pumpe. = Heart pump h-Q characteristic calculation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Horvat, Marko (2016) Studija modela interakcije rotora i statora kod numeričkog određivanja performansi centrifugalnih pumpi. = A study of rotor-stator interaction models for numerical performance prediction of centrifugal pumps. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Horvat, Marko and Kodvanj, Janoš and Bakić, Ante (2010) The influence of contact surface shape on the mechanical properties of osteosynthetic plates. = The influence of contact surface shape on the mechanical properties of osteosynthetic plates. In: 14th International Conference on Experimental Mechanics, ICEM 2014, 04-09.07.2010., Poitiers; France.

Horvat, Matija (2016) Analiza pokretljivosti segmenta šake kao podloga za konstruiranje bioničke proteze šake. = Analysis of hand segments mobility as a basis for bionic prosthesis hand design. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Horvat, Nikola (2017) Određivanje obrazaca komunikacije u razvojnim timovima. = Identification of the communication patterns in teams developing technical systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Horvat, Nino (2015) Implementacija teorije rasta i promjene strukture aorte u paket za konačne elemente. = Numerical implementation of G&R theory in the finite element software. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Horvat, Nino and Krizmanić, Severino and Karšaj, Igor (2017) Numeričko modeliranje stvaranja tromba u analizi rasta abdominalne aneurizme. = Numerical modeling of thrombus formation in analysis of abdominal aortic aneurysm growth. In: Osmi susret Hrvatskog društva za mehaniku, 07-08.07.207., Osijek, Hrvatska.

Horvat, Nino and Virag, Lana and Karšaj, Igor (2016) Analiza utjecaja mišićnih stanica na ponašanje aorte pomoću konačnih elemenata. = Analysis of smooth muscle cells influence on aorta behaviour using finite elements. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.

Horvat, Robert (2016) Upravljanje brizgaljkom goriva mjerenjem faktora pretička zraka te mjerenje emisije NOx u motoru s unutarnjim izgaranjem. = Control of fuel injection by measurement of excess air ratio and measurement of NOx emission from internal combustion engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Horvat, Siniša (2012) Metalne pjene kao zaštita protiv eksplozije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Horvat, Tena (2017) Konstrukcijsko rješenje La Filière Unicum varijatora. = Design solution of La Filière Unicum CVT. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Horvat, Tomislav (2016) Povišenje otpornosti na adhezijsko trošenje titanove legure Ti6Al4V primjenom prevlake PACVD TiN. = Increasing resistance to adhesive wear of titanium alloy Ti6Al4V applying coating PACVD TiN. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Horvatić, Filip (2015) Levitacija kuglice u vertikalnoj cijevi. = Ball levitation in a vertical tube. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Horvatić Novak, Amalija (2018) Uspostavljanje sljedivosti kod računalne tomografije u dimenzionalnom mjeriteljstvu. = Achieving traceability of computed tomography in dimensional metrology. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Horvatić Novak, Amalija and Bošnjaković, Alen and Runje, Biserka (2015) Osiguranje sljedivosti kod primjene računalne tomografije u dimenzionalnom mjeriteljstvu. = In: 15. Hrvatska konferencije o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.

Horvatić Novak, Amalija and Runje, Biserka (2015) Calibration methods of the dimensional metrology X-ray CT system. = Calibration methods of the dimensional metrology X-ray CT system. In: 15. International scientific conference on production engineering Computer Integrated Manufacturing and High Speed Machining CIM 2015, 10-13.06.2015., Vodice, Croatia.

Horvatić Novak, Amalija and Runje, Biserka (2016) Dimensional measurement with usage of computed tomography method. = Dimensional measurement with usage of computed tomography method. In: 6th International conference Mechanical technologies and structural materials 2016, 22-23.09.2016., Split, Hrvatska.

Horvatić Novak, Amalija and Runje, Biserka (2017) Influence of object surface roughness in CT dimensional measurements. = Influence of object surface roughness in CT dimensional measurements. In: 7th Conference on Industrial Computed Tomography, 07.-09.02.2017., Leuven, Belgija.

Horvatić Novak, Amalija and Runje, Biserka and Alar, Vesna and Degiuli, Nastia (2015) Computed tomography - a new method in the fields of dimensional metrology and material inspection. = Computed tomography - a new method in the fields of dimensional metrology and material inspection. In: International Conference, MATRIB 2015: Materials, Wear, Recycling In memoriam prof.dr.sc. Gojko Marić, 25-27.06.2015., Vela Luka, Hrvatska.

Horvatić Novak, Amalija and Runje, Biserka and Butković, Danijel (2016) Influence of geometrical magnification on computed tomography dimensional measurements. = Influence of geometrical magnification on computed tomography dimensional measurements. In: The 27th DAAAM International Symposium Intelligent Manufacturing & Automation: Focus on Sustainability, 26-29.10.2016., Mostar, Bosna i Hercegovina.

Horvatić Novak, Amalija and Runje, Biserka and Novak, Igor and Groš, Josip and Medić, Srđan (2017) Use of different fitting methods in computed tomography dimensional measurements. = Use of different fitting methods in computed tomography dimensional measurements. In: 16th International Scientific Conference on Production Engineering, 8-10.06.2017., Zadar, Hrvatska.

Horvatić Novak, Amalija and Runje, Biserka and Stepanić, Josip (2017) Capabilities of industrial computed tomography in the field of dimensional measurements. = Capabilities of industrial computed tomography in the field of dimensional measurements. Advances in Production Engineering & Management, 12 (3). pp. 245-253. ISSN 1854-6250. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2017). Točan broj autora: 3.

Hoster, Josip and Jarak, Tomislav and Sorić, Jurica (2010) Bezmrežna mješovita kolokacijska formulacija za rješavanje dvodimenzijskih linearno-elastičnih problema. = Meshless mixed collocation formulation for solving 2-D linear-elastic problems. In: Treći susret Hrvatskog društva za mehaniku, 18.06.2010, Osijek; Croatia.

Hranilović, Matija (2018) Rekonstrukcija jednostupanjske uparne stanice. = Single effect evaporation plant retrofit. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ferdelji, Nenad.

Hrdelja, Tomislav (2018) Konstrukcija modela vretenaste tarne preše. = Design od friction screw press model. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Keran, Zdenka.

Hrdelja, Tomislav (2017) Postupci dubokog bušenja. = Deep drilling processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Hrgar, Robert (2015) Difuzijska metalizacija. = Diffusion metallization. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Hrgetić, Mario and Deur, Joško and Ivanović, Vladimir and Tseng, Eric (2014) Vehicle Sideslip Angle EKF Estimator based on Nonlinear Vehicle Dynamics Model and Stochastic Tire Forces Modeling. = Vehicle Sideslip Angle EKF Estimator based on Nonlinear Vehicle Dynamics Model and Stochastic Tire Forces Modeling. SAE International Journal of Passenger Cars- Mechanical Systems, 7 (1). pp. 86-95. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Hrman, Danijela (2015) Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije. = Reliability of characterization of expanded polystyrene using computed radiography. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Hrman, Danijela and Rakvin, Marko and Markučič, Damir (2013) Optimization of scanning parameters of computed radiography for characterization of expanded polystyrene. = Optimization of scanning parameters of computed radiography for characterization of expanded polystyrene. Transactions of FAMENA, 37 (3). pp. 53-64. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Hrnjić, Nino (2015) Vođenje robota primjenom interneta. = Internet remote controlled robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Hrovat, Davor and Tseng, Hongtei Eric and Lu, Jianbo and Deur, Joško and Assadian, Francis and Borrelli, Francesco and Falcone, Paolo (2011) Vehicle controls. = Vehicle controls. In: The Control Handbook (Second Edition): Control System Applications. The Electrical Engineering Handbook Series . CRC Press, Boca Raton, FL, USA, pp. 3-1. ISBN 978-1-4200-7360-7

Hržina, Matija (2015) Analiza proizvodnje u tvornici prediva. = Analysis of the production in the yarn factory. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Hržina, Matija (2017) Ispitivanje tribomehaničkih svojstava dentalnog polimera ojačanog morskim školjkama. = Tribomechanical propertis of dental polymers-seashell based biocomposite. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Hu, Zhongfa and Wang, Xuebin and Luo, Xiaotao and Tan, Houzhang and Mikulčić, Hrvoje and Vujanović, Milan (2015) Particulate Matter and Gas Pollutant Emissions of Biomass Co-firing: an Experimental Study in Drop Tube Furnace. = Particulate Matter and Gas Pollutant Emissions of Biomass Co-firing: an Experimental Study in Drop Tube Furnace. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015, Dubrovnik, Hrvatska.

Hubak, Andro (2014) Uređaj za eksperimentalno određivanje momenata tromosti trkaćeg automobila Formula student. = Inertia measuring machine for Formula Student racing car. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Hublin, Andrea and Schneider, Daniel Rolph and Džodan, Janko (2014) Utilization of biogas produced by anaerobic digestion of agro-industrial waste: Energy, economic and environmental effects. = Utilization of biogas produced by anaerobic digestion of agro-industrial waste: Energy, economic and environmental effects. Waste Management and Research, 32 (7). pp. 626-633. ISSN 0734-242X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

Hublin, Andrea and Schneider, Daniel Rolph and Džodan, Janko (2013) Utilization of biogas produced by anaerobic digestion of agro-industrial waste: energy, economic and environmental effects. = Utilization of biogas produced by anaerobic digestion of agro-industrial waste: energy, economic and environmental effects. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.

Huklek, Marko (2016) Uporaba simulatora za obuku zavarivača. = Virtual simulator usage on welder training. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Hunić, Domagoj (2015) Projekt grijanja stambene zgrade sustavom s dizalicom topline. = Design of heating system with heat pump for residential building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Hunjet, Inja (2018) Izbor regulacijskih ventila. = Selection of control valves. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.

Husajina, Ivan (2015) Analiza trošenja zupčanika diferencijalnog prijenosnika u pogonskom sustavu motornog vozila. = Wear analysis of differential gears in the drive system of a motor vehicle. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

I

Igrec, Bojan (2012) Postupak umjravanja pretvornika tlaka visokog razreda točnosti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Igrec, Bojan and Bosiljevac, Marko and Rudan, Smiljko and Šipuš, Zvonimir and Babić, Dubravko (2015) Fiber-optic vibration sensor for high-power electric machines. = Fiber-optic vibration sensor for high-power electric machines. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2015), 25.-29. svibanj 2015., Opatija, Croatia.

Igrec, Bojan and Bosiljevac, Marko and Šipuš, Zvonimir and Babić, Dubravko and Rudan, Smiljko (2016) Fiber-optic vibration sensor for high-power electric machines realized using 3D printing technology. = Fiber-optic vibration sensor for high-power electric machines realized using 3D printing technology. In: Photonics West 2016 - Photonic Instrumentation Engineering III, 14-19.02.2016., San Francisco, SAD.

Igrec, Ivan (2015) Izrada novog konstrukcijskog rješenja prihvata motora na kočnici motora Zöllner. = A new design of the mounting position for the engine on the Zöllner dynamometer. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko and Tomić, Rudolf.

Igrec, Ivan (2018) Uređaj za vađenje šljunka iz filtra pročistača vode. = Device for extraction of gravel from water purifier filter. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Ilić, Dražen (2015) Aluminotermijsko zavarivanje tračnica. = Aluminothermic rail welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Ilić, Dražen (2016) Optimizacija prijenosa metala za aditivnu proizvodnju električnim lukom i žicom. = Optimization of metal transfer for Wire and Arc Additive Manufacturing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Ilić, Marko and Schauperl, Zdravko and Šolić, Sanja (2011) Karakterizacija izotermički poboljšanog nodularnog lijeva. = Characterization of austempered ductile iron. In: Međunarodno savjetovanje MATRIB 2011, materijali, tribologija, recikliranje, Vela Luka, Hrvatska.

Iličić, Dominik (2018) Predgrijavanje aluminijskih blokova s vrućim zrakom. = Preheating of aluminium blocks with hot air. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ferdelji, Nenad.

Iličić, Ivan (2017) Konstrukcijsko oblikovanje i dimenzioniranje traktorske prikolice za prijevoz ogrjevnog drveta. = Design of tractor trailer for the transport od firewood. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sjerić, Momir.

Iljkić, Josip (2018) Zamjena radne tvari R-404A s radnom tvari srednjeg utjecaja na globalno zatopljenje u rashladnom uređaju za potrebe hlađenja na niske temperature. = Retrofiting of a R-404A condensing unit to a fluorinated medium GWP refrigerant for a low temperature commercial application. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.

Irsag, Bojan and Pukšec, Tomislav and Duić, Neven (2011) Long term energy demand projection and potential for energy savings of Croatian tourist-catering trade sector. = Long term energy demand projection and potential for energy savings of Croatian tourist-catering trade sector. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011, Dubrovnik, Hrvatska.

Ivandija, Matija (2014) Projektiranje komunalne hidraulike za primjenu na vozilima. = Design of communal hydraulicsfor vehicle application. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.

Ivandija, Matija (2012) Sistematizacija kalupa za injekcijsko prešanje. = Undergraduate thesis , Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Ivandić, Viktorija (2016) Proces otkrivanja znanja primjenom tehnika rudarenja podataka. = Process of discovering knowledge using data mining techniques. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Ivanek, Tomislav (2015) Mokro podvodno zavarivanje. = Underwater wet welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Ivanek, Tomislav (2016) Utjecaj parametara anodizacije aluminija na strukturu oksidne prevlake. = The influence of anodization parameters on the structure of aluminium oxide layer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stojanović, Ivan.

Ivaniš, Davor and Schauperl, Zdravko and Šolić, Sanja (2011) Otpornost na trošenje prevlaka dobivenih HVOF postupkom. = Wear resistance of HVOF coatings. In: Međunarodno savjetovanje MATRIB 2011, materijali, tribologija, recikliranje, Vela Luka, Hrvatska.

Ivanišević, Karlo (2018) Projekt sustava ventilacije, grijanja, i hlađenja zgrade za proizvodnju lijekova. = Design of heating, cooling and ventilation system for pharmaceutical production building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smoljan, Darko.

Ivanković, Margita (2017) On-line Monte Carlo simulacija. = On-line Monte Carlo simulation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Ivanković, Margita (2019) Upravljanje prijenosom tereta primjenom autonomnih letjelica. = Control of load transportation by using unmanned aerial vehicles. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.

Ivanković, Marin (2019) Analiza misije zrakoplova s aspekta ekonomike goriva. = Aircraft Mission Analysis From Aspect of Fuel Economy. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Ivanović, Vladimir (2010) Modeliranje i regulacija elemenata pogona vozila s izraženim učincima trenja. = Modeling and control of vehicle powertrain components with emphasized friction effects. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Ivanović, Vladimir and Deur, Joško and Kostelac, Milan and Pentek, Tibor and Hrovat, Davor (2011) Tyre friction behaviour under abrupt wheel torque transients on slippery road surfaces : experimental analysis and modelling. = Tyre friction behaviour under abrupt wheel torque transients on slippery road surfaces : experimental analysis and modelling. Vehicle system dynamics, 49 (10). pp. 1623-1647. ISSN 0042-3114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 5.

Ivanović, Vladimir and Hoić, Matija and Deur, Joško and Herold, Zvonko and Tseng, Hongtei Eric (2012) Design of test rigs for a dry dual clutch and its electromechanical actuator. = Design of test rigs for a dry dual clutch and its electromechanical actuator. SAE International Journal of Passenger Cars - Mechanical Systems, 5 (1). pp. 612-620. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Ivančević, Darko and Smojver, Ivica (2016) Explicit multiscale modelling of impact damage on laminated composites – Part I: Validation of the micromechanical model. = Explicit multiscale modelling of impact damage on laminated composites – Part I: Validation of the micromechanical model. Composite structures, 145. pp. 248-258. ISSN 0263-8223. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.

Ivančević, Darko and Smojver, Ivica (2016) Explicit multiscale modelling of impact damage on laminated composites – Part II: Multiscale analyses. = Explicit multiscale modelling of impact damage on laminated composites – Part II: Multiscale analyses. Composite structures, 145. pp. 259-268. ISSN 0263-8223. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.

Ivančević, Darko and Smojver, Ivica (2012) Micromechanical Modelling of Damage in Composite Structures Using HFGMC. = Micromechanical Modelling of Damage in Composite Structures Using HFGMC. In: 7th International Congress of Croatian Society of Mechanics, 22.-25.05.2012, Zadar.

Ivančević, Darko and Smojver, Ivica (2014) Micromechanical damage modelling using a two-scale method for laminated composite structures. = Micromechanical damage modelling using a two-scale method for laminated composite structures. Composite Structures, 108 (1). pp. 223-233. ISSN 0263-8223. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (25.5.2015.). Točan broj autora: 2.

Ivančević, Darko and Smojver, Ivica (2013) Micromechanical modelling of damage processes in composite materials. = Micromechanical modelling of damage processes in composite materials. In: 19th International Conference on Composite Materials (ICCM19), Montreal, Kanada.

Ivančević, Darko and Smojver, Ivica (2012) Multiscale Approach to Damage Analysis of Laminated Composite Structures. = Multiscale Approach to Damage Analysis of Laminated Composite Structures. In: 2012 3DS SIMULIA Community Conference, 15.-17.05.2012., Providence, SAD.

Ivančević, Darko and Smojver, Ivica (2013) Usporedba mikromehaničkih kriterija popuštanja kompozitnih materijala. = Evaluation of micromechanical failure criteria for composite materials. In: Peti susret Hrvatskog društva za mehaniku, 6-7.06.2013, Donja Stubica, Hrvatska.

Ivančević, Darko and Šarović, Kristina and Smojver, Ivica (2011) Usporedba kriterija popuštanja primijenjenih na ojačane avionske kompozitne panele. = Comparison of Failure Criteria Applied on Stiffened Airplane Composite Panels. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.

Ivančić, Ante (2014) Tehnike klasteriranja pomoću teorije grafova. = Clustering techniques using graph theory. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Ivačić, Mirko (2018) Optimiranje kombiniranog kogeneracijskog postrojenja u cilju postizanja kriterija visoke učinkovitosti. = Optimization of the combined cogeneration plant in order to achieve high efficiency criteria. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.

Ivković, Josip (2014) Izrada alata za školjkasti lijev. = Tool production for shell-mold casting. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Ivušić, Franjo and Alar, Vesna and Šarc-Lahodny, Olga and Juraga, Ivan (2012) Inhibicija korozije ugljičnog čelika u vodi primjenom glukonata. = Corrosion inhibition of carbon steel in water using gluconates. In: 20. Savjetovanje o zaštiti materijala i industrijskom finišu KORMAT 2012, 17.4.2012., Zagreb, Hrvatska.

Ivušić, Franjo and Franz, Mladen and Španiček, Đurđica and Ćurković, Lidija (2014) Materijali I , Novo izmjenjeno izdanje. = Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-28-0 (Unpublished)

Ivušić, Franjo and Lahodny-Šarc, Olga and Alar, Vesna (2013) Corrosion inhibition of carbon steel in various water types by zinc gluconate. = Corrosion inhibition of carbon steel in various water types by zinc gluconate. Materialwissenschaft und Werkstofftechnik, 44 (4). pp. 319-329. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Ivušić, Franjo and Lahodny-Šarc, Olga and Stojanović, Ivan (2014) Corrosion inhibition of carbon steel in saline solutions by gluconate, zinc sulphate and clay eluate. = Corrosion inhibition of carbon steel in saline solutions by gluconate, zinc sulphate and clay eluate. Tehnički vjesnik, 21 (1). pp. 107-114. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Ivušić, Franjo and Šarc-Lahodny, Olga and Otmačić Ćurković, Helena and Alar, Vesna and Stojanović, Ivan (2014) Environmentally friendly inhibitors of carbon steel corrosion in chloride environments. = Environmentally friendly inhibitors of carbon steel corrosion in chloride environments. In: 21th Conference of materials protection and industrial finish, 10.04.2014., Zagreb, Hrvatska.

Ivušić, Vinko and Franz, Mladen and Španiček, Đurđica and Ćurković, Lidija (2011) Materijali I. = Materials I. Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-11-2 (Unpublished)

Ivšac, Danijel (2014) Usporedba 3D mjernih postupaka u kontroli kvalitete. = The comparison of 3D measurement procedures in quality control. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Išek, Ivan (2015) Proračun snage vjetro-turbine. = Wind turbine power calculation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Išek, Marko (2017) Dinamika regulacije tlaka i temperature pregrijane pare. = Superheated steam pressure and temperature control dynamics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Išek, Marko (2016) Umjeravanje visokotlačnog pretvornika tlaka visokog razreda točnosti. = Calibration of hih pressure digital gauge of high accuracy class. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

J

Jagar, Matija (2019) Kompoziti s plastomernom matricom ojačanom vlaknima. = Fiber reinforced composites with thermoplastic matrix. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Jagarčec, Monika (2015) Hidraulična preša za krzalicu. = Design solution of a hydraulic press for a mould trimming device. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Jagarčec, Valentina (2017) Analiza utjecaja smjera dodavanja materijala na svojstva zupčanika s ravnim zubima izrađenih aditivnim tehnologijama. = Analysis of printing direction impact on the properties of spur gears made with additive technologies. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Jagarčec, Valentina (2015) Uređaj za guljenje i narezivanje jabuka. = Device for apple peeling and slicing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Jagušt, Eugen (2018) Analiza rada Ottovog motora primjenom potpuno varijabilnog ventilskog razvoda. = Analysis of spark ignition engine operation with fully variable valve timing system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sjerić, Momir.

Jakopčić, Mirko and Grilec, Krešimir (2010) Influence of artillery weapon barrel superheat on erosion wear resistance of material. = Influence of artillery weapon barrel superheat on erosion wear resistance of material. Transactions of FAMENA, 34 (2). pp. 27-36. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 2.

Jakopčić, Mirko and Grilec, Krešimir (2010) Influence on artillery weapon barrel superheat on abrasion wear resistance of material. = Influence on artillery weapon barrel superheat on abrasion wear resistance of material. In: Međunarodno savjetovanje o materijalima, tribologiji, recikliranju, 23-25.06.2010., Vela Luka; Croatia.

Jakoubek, Mateo (2017) Procjena turbulentne brzine širenja plamena iz izmjerenog toka tlaka u cilindru Ottovog motora. = Estimation of the turbulent flame speed from the analysis of measured in-cylinder pressure profile of spark ignition engine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sjerić, Momir.

Jakovac, Filip (2015) Trošenje oštrica pile za rezanje drveta. = Wear of saw blades for wood cutting. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Jakovljević, Matko (2016) Analiza analitičkih modela za procjenu vremena povratne vožnje transportnih sredstava. = Analysis of analytical models for evaluation of empty travel time of transporters. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Jakovljević, Matko (2015) Analiza tržišta medicinskih vozila u Republici Hrvatskoj. = Market analysis of medical vehicles in Republic of Croatia. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Jakovljević, Suzana (2014) Laboratorijske metode ispitivanja kliznog i abrazijskog trošenja. = The laboratory test method of sliding and abrasion wear of materials. In: International conferance MATRIB 2014, 26-28.06.2014., Vela Luka ; Korčula ; Hrvatska.

Jakovljević, Suzana (2016) Materials and hip in hip replacement. = Materials and hip in hip replacement. In: HIP A la Carte, 02-03.04.2016., Pula, Hrvatska.

Jakovljević, Suzana and Džoić, Marko (2015) Trajnost matrice za izvlačenje cijevi rashladnih uređaja. = Durabilty of dies for drawing cooling device pipes. In: Matrib 2015. Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić, 25-27.06.2015., Vela Luka, Hrvatska.

Jakovljević, Suzana and Lisjak, Dragutin and Alar, Željko and Penava, Frano (2017) The influence of humidity on mechanical properties of bamboo for bicycles. = The influence of humidity on mechanical properties of bamboo for bicycles. Construction and building materials, 150. pp. 35-48. ISSN 0950-0618. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Jakovljević, Suzana and Šućur, Nada (2015) Trošenje klipnjače koljenastog vratila dvotaktnog motora s vanjskim paljenjem. = Wear of crankshaft of two-stroke engine with external ignition. In: Matrib 2015. Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić, 25-27.06.2015., Vela Luka ; Korčula ; Hrvatska.

Jakšić, Dino (2017) Ručni dohvatnik za izvlačenje čamaca. = Manual crane for extraction of boats. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Jakšić, Fran (2015) Nuklearne elektrane danas. = Nuclear power plants today. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Jakšić, Tomislav (2015) Analiza i poboljšanje apsolutne točnosti robota za primjenu u neurokirurgiji. = Robot absolute accuracy analysis and improvement for robot application in neurosurgery. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Jakšić, Tomislav and Dović, Damir and Petošić, Antonio (2011) Test Rig as Development Incentive. = Test Rig as Development Incentive. In: Interklima '11, 21 Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 10. Konferencija o termografiji,, 07.-08.04.2011., Zagreb, Hrvatska.

Jalušić, Boris (2009) Analiza utjecajnih parametara na intenzivnost hlađenja epruvete strujom dušika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.

Jalušić, Boris (2016) Bezmrežna numerička metoda za modeliranje heterogenih materijala. = Meshless numerical method for modeling of heterogeneous materials. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sorić, Jurica.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2014) Bezmrežna numerička kolokacijska metoda za modeliranje heterogenih materijala. = Meshless collocation method for modeling of heterogeneous materials. In: Šesti susret Hrvatskog društva za mehaniku, 29.-30.5.2014., Rijeka, Hrvatska.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2016) Bezmrežno modeliranje konstrukcija primjenom gradijentne elastične teorije. = Meshless modeling of structures using strain gradient theory. In: Sedmi susret Hrvatskog društva za mehaniku, 16.-17.6.2016., Split, Hrvatska.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2013) O bezmrežnom modeliranju heterogenih materijala. = On meshless modeling of heterogeneous materials. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2015) On the Optimization of Shape Parameters in the Local Radial Point Interpolation Collocation Method for Modeling of Heterogeneous Materials. = On the Optimization of Shape Parameters in the Local Radial Point Interpolation Collocation Method for Modeling of Heterogeneous Materials. In: 8th International Congress of Croatian Society of Mechanics, 29.9.-2.10.2015., Opatija, Hrvatska.