  |
 | Up a level |
Abramović, Anđelko (2011) Utjecaj hlađenja na temperaturu kosti kod postupka bušenja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Abrashi, Arijan (2011) Optimizacija problema raspoređivanja primjenom genetičkog algoritma s nišama. = Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Adamić, Tihomir (2011) Analiza dinamike četverorotornog helikoptera. = Analysis of quadrotor helicopter flight dynamics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Adamović, Zdravko (2011) Zeleno upravljanje lancima opskrbe - koncept i pregled inicijativa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Alar, Vesna and Esih, Ivan and Budić, Ivan (2011) Effects of Thermal Oxidation and Subsequent Pickling on Pitting Geometry of Austenitic Stainless Steels in Chloride Solutions. = Effects of Thermal Oxidation and Subsequent Pickling on Pitting Geometry of Austenitic Stainless Steels in Chloride Solutions. Materials testing (Materialprufung), 53. pp. 634-638. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Alar, Vesna and Stojanović, Ivan and Mihalic, Ivana (2011) Zaštita ugljičnog čelika vodorazrjedivim premazima. = Protection of steel by waterborne coatings. Zaštita materijala, 52 (3). pp. 201-203. ISSN 0351-9465. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Alar, Vesna and Stojanović, Ivan and Židov, Bruno and Kapor, Frankica (2011) Utjecaj emulzije na brzinu korozije čeličnog obratka. = Influence of emulsion on the corrosion rate of steel workpiece. In: XIII YUCORR, 5-8.04.2011., Tara, Srbija.
Alar, Vesna and Šimunović, Vinko and Juraga, Ivan (2011) Korozija i zaštita (skripta). = Corrosion and Protection. FSB. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3. (Unpublished)
Aleksandrov Fabijanić, Tamara and Alar, Željko and Franz, Mladen and Ćorić, Danko (2011) Investigation of the reference hardness block quality. = Investigation of the reference hardness block quality. In: INTERNATIONAL CONFERENCE MATRIB 2011., 29.06-01.07.2011, Vela Luka, Korčula.
Alfirević, Ivo (2011) Utjecaj Aristotela i peripatetičke filozofije na razvoj mehanike. = The influence of Aristotle and Peripatetic philosophy in the development of mechanics. In: 4. susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.
Alićušić, Edo (2011) Uređaj za bušenje tla pogonjen traktorom. = Tractor mounted post hole digger. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Alujević, Neven and Gardonio, Paolo and Frampton, Kenneth D. (2011) Smart Double Panel for the Sound Radiation Control: Blended Velocity Feedback. = Smart Double Panel for the Sound Radiation Control: Blended Velocity Feedback. Aiaa journal, 49 (6). pp. 1123-1134. ISSN 0001-1452. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Alujević, Neven and Wolf, Hinko and Gardonio, Paolo and Tomac, Ivan (2011) Stability and performance limits for active vibration isolation using blended velocity feedback. = Stability and performance limits for active vibration isolation using blended velocity feedback. Journal of Sound and Vibration, 330 (21). pp. 4981-4997. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 4.
Andrić, Ivana (2011) Toplinske deformacije u postupcima toplinske obrade metala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Andrić, Marijan (2011) Izračun otpora i značajki motora za analizu performansi modernog mlaznog lovackog zrakoplova. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijašević, Branimir.
Anić, Luka (2011) Daljinsko upravljanje robotom na principu pasivne sinkronizacije. = Remote control of robot based on passive synchronization. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.
Anić, Luka and Kasać, Josip and Novaković, Branko (2011) Passive sliding-mode synchronization of multi-robotic systems with structural uncertainties and external disturbances. = Passive sliding-mode synchronization of multi-robotic systems with structural uncertainties and external disturbances. In: The 22nd DAAAM International World Symposium, 23-26.11.2011., Beč, Austrija.
Antić, Goran (2011) Računalna simulacja injekcijskog prešanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Antonić, Krunoslav (2011) Stroj za nanošenje brvenog premaza na ambalažni lim. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Ančić, Ivica (2011) Projekt vratilnog voda tankera. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šestan, Ante.
Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2011) Comparative analysis of basic procedures for shafting alignment calculation. = Comparative analysis of basic procedures for shafting alignment calculation. In: 14th International Congress of the International Maritime Association of the Mediterranean, IMAM 2011, 13 September - 16 September 2011., Genova, Italy.
Asodi, Mislav (2011) Tehno-ekonomska analiza male hidroelektrane. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Augusta, Domagoj (2011) Dupleks postupak aluminiziranja i nitriranja čelika. = Duplex aluminizing and nitriding process of steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Aščić, Blanka (2011) Izgradnja katamarana iz staklolastike. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubenkov, Boris.
Babić, Adam (2011) Korištenje topline kondenzacije rashladnog postrojenja PIK Vrbovec za zagrijavanje PTV-a. = Condensation heat utilization for heating domestic hot water in refrigeration plant PIK Vrbovec. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Babić, Davor (2011) Utjecaj stanja površine na korozijsku otpornost austenitnog i dupleks Cr-Ni čelika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Babić, Tomislav (2011) Strukturna analiza teretnog prostora broda za rasuti teret. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Baborsky, Edy (2011) Klizač za zaštitu od pada s visine. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Bajkovec, Drago (2011) Suvremeni postupci prevlačenja iz parne faze. = Modern physical vapour deposition processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Bakić, Ante and Semenski, Damir and Jecić, Stjepan (2011) Contact caustics measurements expanded to anisotropic materials. = Contact caustics measurements expanded to anisotropic materials. Archives of Civil and Mechanical Engineering, 11 (3). pp. 497-505. ISSN 1644-9665. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 3.
Baleta, Jakov (2011) Određivanje efektivne površine tlačne vage. = Determination of pressure balance effective area. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Ban, Marko (2011) Numeričko modeliranje kemijske kinetike samozapaljenja u računalnoj dinamici fluida. = Numerical modelling of autoignition chemistry kinetics in computational fluid dynamics. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Ban, Marko and Duić, Neven (2011) Adaptation of n-heptane autoignition tabulation for complex chemistry mechanisms. = Adaptation of n-heptane autoignition tabulation for complex chemistry mechanisms. Thermal Science, 15 (1). pp. 135-144. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 2.
Ban, Marko and Krajačić, Goran and Grozdek, Marino and Ćurko, Tonko and Duić, Neven (2011) The Role of Cool Thermal Energy Storage in Integration of Renewable Energy Sources and Peak Load Reduction. = The Role of Cool Thermal Energy Storage in Integration of Renewable Energy Sources and Peak Load Reduction. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.
Banjamin, Stanko (2011) Pokretna platforma portalne dizalice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Banožić, Vinko (2011) Utjecaj hrapavosti površine na Knoopovu tvrdoću Al2O3 keramike. = Influence of surface roughness on Knoop hardness of Al2O3 ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Barić, Emil (2011) Mini plinsko-turbinsko postrojenje na biomasu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Bartolec, Janko (2011) Dvostupanjski prijenosnik snage. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Baršić, Gorana (2011) Razvoj etalona hrapavosti za nanomjeriteljstvo. = Development of roughness standard for nanometrology. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahović, Sanjin.
Baršić, Gorana and Mahović, Sanjin and Picotto, Gian Bartolo and Amer, Mohamed and Runje, Biserka (2011) Groove depth measurements on roughness reference standards of the Croatian National Laboratory for Length (LFSB). = Groove depth measurements on roughness reference standards of the Croatian National Laboratory for Length (LFSB). Measurement Science and Technology, 22 (9). ISSN 0957-0233. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Baršić, Gorana and Mahović, Sanjin and Runje, Biserka (2011) Problems in ensuring measurement unity in the field of dimensional nanometrology. = Problems in ensuring measurement unity in the field of dimensional nanometrology. In: 13th International Scientific Conference on Production Engineering CIM, 16-18.06.2011., Biograd, Hrvatska.
Baršić, Gorana and Šimunović, Vedran and Katić, Marko (2011) Ensuring measurement unity in the field of dimensional nanometrology. = Ensuring measurement unity in the field of dimensional nanometrology. In: 22nd DAAAM World Symposium 2011, 23.26.11.2011., Beč, Austrija.
Baršić, Zdravko and Runje, Biserka and Baršić, Gorana and Belavić, Božidar and Kralj, Hrvoje (2011) Uloga statističkih metoda u ocjenjivanju sukladnosti proizvoda od čelika. = The role of statistical methods of steel products conformity assessment. In: 11. Hrvatska konferencija o kvaliteti i 2. znanstveni skup Hrvatskog društva za kvalitetu, 12-14.05.2011., Vodice, Hrvatska.
Baršun, Vinko (2011) Određivanje protočne količine mjernom prigušnicom. = Determination of fluid flow by orifice plate measuring device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Bauer, Branko and Bušić, Matija (2011) High energy density welding processes. = High energy density welding processes. In: Welding Engineering and Technology. Encyclopedia of Life Support Systems (EOLSS) . Eolss Publishers (under the Auspices of the UNESCO), Oxford, pp. 1-31. ISBN 978-1-905839
Bauer, Branko and Kralj, Slobodan and Kožuh, Zoran and Dorn, Lutz (2011) Effects of type of shielding gas upon local mechanical properties of laser welded joint in heat - treatable steel. = Effects of type of shielding gas upon local mechanical properties of laser welded joint in heat - treatable steel. Materialwissenschaft und Werkstofftechnik, 42 (8). pp. 718-726. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Bauer, Branko and Topić, Angela and Kralj, Slobodan and Kožuh, Zoran (2011) Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel. = Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel. Materiali in tehnologije, 45 (5). pp. 413-419. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Bauer, Branko and Topić, Ante and Kralj, Slobodan and Kožuh, Zoran (2011) Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel. = Influence of the gas composition on the geometry of laser-welded joints in duplex stainless steel. Materiali in Tehnologije, 45 (5). pp. 413-419. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). .
Baček, Tomislav (2011) Analiza iterativnih metoda učenja unaprijedne neuronske mreže. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.
Baček, Tomislav and Majetić, Dubravko and Brezak, Danko and Kasać, Josip (2011) Analysis of iterative learning algorithms for the multilayer perceptron neural network. = Analysis of iterative learning algorithms for the multilayer perceptron neural network. In: The 22nd DAAAM International Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.
Belavić, Božidar (2011) Procjena razine kvalitete proizvođača čelika za armiranje betona. = Quality assessment of manufacturers producing concrete reinforcing steel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Beljo, Branimir (2011) Određivanje dinamičkih karakteristika giromagnetskih kompasa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Benger, Bruno (2011) Numerički upravljani stroj za obradu folija. = Numerically controlled machine for foil cutting. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Benički, Filip (2011) Kolica za opsluživanje uređaja za skidanje kore s trupca. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Beronić, Hrvoje (2011) Određivanje osnovnih karakteristika motora s unutarnjim izgaranjem mjerenjem dinamičkih karakteristika vozila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Bezjak, Mladen and Zvizdić, Davor (2011) Dynamic measurements of the thermal conductivity of insulators. = Dynamic measurements of the thermal conductivity of insulators. International Journal of Thermophysics, 32 (7-8). pp. 1467-1478. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 2.
Bilić, Livio (2011) Primjena električnog luka kao senzora u robotiziranom MAG. = Application of the electric arc as a sensor at robotized MAG welding. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kralj, Slobodan.
Birčić, Vjekoslav (2011) Mini plinska turbina za redukcijsku plinsku stanicu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.
Bišćan, Marija (2011) Ispitivanje zrakoplovnih sendvič materijala prema ASTM C365-03. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Blatarić, Zoran (2011) Parna turbina za geotermalnu elektranu Velika Ciglena. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Blažun, Goran (2011) Ključni pokazatelji učinkovitosti u održavanju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Bogdan, Željko (2011) Analysis of Reheater Size Impact on Power Plant Performance. = Analysis of Reheater Size Impact on Power Plant Performance. In: 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT, 11-13.07.2011., Pointe Aux Piments, Mauritius.
Bogdanović, Igor (2011) Vizualizacija gibanja i upravljanja helikopterskim rotorom kao dopuna materijalima e - učenja. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Bojkovski, Jovan and Veliki, Tomislav and Drnovšek, Janko and Zvizdić, Davor (2011) Bilateral Comparison of Mercury and Gallium Fixed-Point Cells Using Standard Platinum Resistance Thermometer. = Bilateral Comparison of Mercury and Gallium Fixed-Point Cells Using Standard Platinum Resistance Thermometer. International journal of thermophysics, 32 (7). pp. 1544-1552. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 4.
Bokučan, Marko (2011) Termovizijsko praćenje stanja tribosustava. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Bolanča, Niko (2011) Određeivanje trajne čvrstoće materijala X21CrMoV12-1 s različito sačmarenom površinom. = Quantifying enduring strength of material X21CrMoV12-1 with different shot peening surface. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Bolanča, Tomislav and Ukić, Šime and Ćurković, Lidija and Šiljeg, Mario (2011) Removal of Iron Ions Form Water by Using Clinoptilolite - Rich Rock and its Na - Enriched Form: a Kinetic Approach. = Removal of Iron Ions Form Water by Using Clinoptilolite - Rich Rock and its Na - Enriched Form: a Kinetic Approach. In: CET 2011 - World Congress on Engineering and Technology, Šangaj, Kina.
Bonačić Bartolin, Petra (2011) Dinamička izdržljivost disk implantata kralješnice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Boroša, Ivan (2011) Ocjena kvalitete izrade predkalupa za boce. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Bosec, Tomislav (2011) Zaštita čeličnih konstrukcija premazima. = Coating protection of steel structures. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Bošković, Siniša (2011) Kvantifikacija osjetljivosti računalne radiografije višedjelnih komponenti. = Quantification of computed radiography sensitivity of multilayered components. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Božiković, Dominik (2011) Simulacija hidrauličkih sustava u programskom alatu DSHplus. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Božić, Dejan (2011) Analiza sustava za proizvodnju transformatorskih kotlova. = Analysis of the production system for transformer tanks. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Božić, Mladen (2011) Rekonstrukcija uređaja za mjerenje sile kočenja na kotaču cestovnog vozila. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Božić, Željko and Mlikota, Marijo and Schmauder, Siegfried (2011) Primjena ΔK, ΔJ i ΔCTOD parametara u modeliranju rasta zamornih pukotina. = Application of the ΔK ΔJ and ΔCTOD, parameters in fatigue crack growth modelling. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (3). pp. 459-466. ISSN 1330-3651. Vrsta rada: Review article. Kvartili JCR: Q4 (2011). .
Branilović, Dino (2011) Utjecaj zaštitnog plina pri TIG zavarivanju Cr-Ni čelika na geometrijske značajke zavara. = Influence of shielding gas at TIG welding of Cr-Ni steel upon geometry characteristics of welding joint. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Bratić, Silvio (2011) Planiranje razvoja energetski samodostatnog otoka Unije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Bračun, Vedran (2011) segmentno brušenje noža za strojno rezanje mesa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Breka, Bruno (2011) Utjecaj stanja površine na korozijsku otpornost nehrđajućih čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Briški, Marko (2011) Ventilacija i otprašivanje proizvodnoga pogona. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ruševljan, Miroslav.
Brkić, Antonija (2011) Izbor materijala u petrokemijskoj industriji. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Brnadić, Emilio (2011) Povećanje efikasnosti poduzeća primjenom suvremenih metoda proizvodnog menadžmenta. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Brnadić, Tomislav (2011) Primjena načela vitkog održavanja za benzinske postaje. = Applying the principles of slender maintaining for petrol stations. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Brozd, Mario (2011) Procjena tehnoloških mogućnosti proizvodnje u tvrtki. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Bubalo, Ante (2011) Određivanje polja pomaka vrška pukotine digitalnom korelacijom slike. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Burek, Valentin and Jurić, Ivan and Dović, Damir (2011) Termografsko snimanje vrećastog distributera zraka. = Thermographic measurements of the air bag distributor. In: Interklima '11, 21 Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 10. Konferencija o termografiji,, 07.-08.04.2011., Zagreb, Hrvatska.
Burić, Zrinka (2011) Preostala sigurnost konstrukcije oštećenog naftnog tankera na Jadranskom moru. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Kovačić, Saša (2011) Effect of the heating rate in the tempering of steel grade EN 100 V1. = Effect of the heating rate in the tempering of steel grade EN 100 V1. In: The 3rd IFHTSE-Conference on “Heat Treatment and Surface Engineering of Tools and Dies”., 23-25. 03. 2011, Wels, Austrija.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Šolić, Sanja and Kovačić, Saša (2011) Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. = Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. In: IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.
Cajner, Franjo and Šolić, Sanja and Kumić, Ivan and Leskovšek, Vojteh (2011) Effect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel. = Effect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel. In: 3rd International IFHTSE Conference on "Heat treatment and Surface engineering of Tools and Dies", Wels, Austrija.
Cajner, Hrvoje (2011) Višekriterijsko adaptivno oblikovanje planova pokusa. = Multi-criteria adaptive design of experimental plans. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šakić, Nikola.
Carek, Andreja and Živko-Babić, Jasenka and Schauperl, Zdravko and Badel, Tomislav (2011) Mechanical Properties of Co-Cr Alloys for Metal Base Framework. = Mechanical Properties of Co-Cr Alloys for Metal Base Framework. International Journal of Prosthodontics and Restoratve Dentistry, 1 (1). pp. 13-19. ISSN 2231-6361. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Carev, Zdravko (2011) Analiza modela upravljanja i regulacije u općoj teoriji spoznaje. = Analysis of the model of regulation and control in the general theory of cognition. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Novaković, Branko.
Cerovšek, Katarina (2011) Primjene glasovne tehnologije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Cetinjanin, Danijel (2011) Bicikl s elektromotorom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Cipek, Mihael and Pavković, Danijel and Petrić, Joško (2011) A Control-oriented simulation model of a power-split hybrid electric vehicle. = A Control-oriented simulation model of a power-split hybrid electric vehicle. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2011, 25-29.09.2011., Dubrovnik, Hrvatska.
Crnić, Srđan (2011) Mjerna linija za laboratorijsku vježbu Centrifugalna pumpa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Džijan, Ivo.
Cupar, Filip (2011) Osiguranje kvalitete pri rukovanju filmovima za industrijsku radiografiju. = Quality assurance during use of films for industrial radiography. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Cupek, Ivan (2011) Osnivanje broda za opskrbu platformi. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Slapničar, Vedran.
Cvetko, Ivančica (2011) Projekt vjetroparka u Jadranskom moru. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čorić, Većeslav.
Dananić, Mario (2011) Analiza strukture i svojstva kompozita staklena vlakna-epoksidna smola. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Demeter, Izidor (2011) Keramički alatni materijali. = Ceramic tool materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Demetlika, Andrea (2011) Upravljanje hidrauličke preše pomoću PLC-a. = Control of hydraulic press using PLC. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Deur, Joško and Barber, Phil and Hancock, Matthew (2011) Design of a cascade structure of sideslip and yaw rate control. = Design of a cascade structure of sideslip and yaw rate control. In: International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2011), 14-19. 08. 2011., Manchester, UK.
Deur, Joško and Hancock, Matthew and Assadian, Francis (2011) Design and comparative study of yaw rate control systems with various actuators. = Design and comparative study of yaw rate control systems with various actuators. In: SAE 2011 World Congress and Exhibition, 12-14. 4. 2011., Detroit, United States.
Deur, Joško and Kasać, Josip and Hancock, Matthew and Barber, Phil (2011) A study of optimization-based assessment of global chassis control actuator configurations. = A study of optimization-based assessment of global chassis control actuator configurations. In: International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2011), 14-19. 08. 2011., Manchester, UK.
Deur, Joško and Pavković, Danijel (2011) Fundamentals of electrical drive controls. = Fundamentals of electrical drive controls. In: Encyclopedia of Life Support Systems (EOLSS) ; Physical Sciences, Engineering and Technology Resources ; Electrical Engineering. EOLSS Publishers, Oxford, pp. 1-59. ISBN 978-1-905839-79-7
Deur, Joško and Pavković, Danijel and Burgio, Gilberto and Hrovat, Davor (2011) A model-based traction control strategy non-reliant on wheel slip information. = A model-based traction control strategy non-reliant on wheel slip information. Vehicle System Dynamics, 49 (8). pp. 1245-1265. ISSN 0042-3114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 4.
Dežulović, Milan (2011) Analiza razine kvalitete proizvodnje ribarskih alata. = Analysis of quality level in fishing tools production. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šakić, Nikola.
Dobrota, Sveto (2011) Šest sigma metodologija u proizvodnji aluminijskih proizvoda za pakiranje. = Six sigma methodology in the production of alu products for packing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šakić, Nikola.
Dobrović, Slaven and Juretić, Hrvoje and Ljubas, Davor and Vinković Vrček, Ivana and Milić, Mirta and Kopjar, Nevenka and Nemet, Ina and Jerić, Ivanka (2011) Nanosilver in the glass of water - a comprehensive identification of disinfection by-products and assessment of mutagenicity of disinfected drinking water in the presence of nanosilver. = Nanosilver in the glass of water - a comprehensive identification of disinfection by-products and assessment of mutagenicity of disinfected drinking water in the presence of nanosilver. In: Fourth IWA Specialty Conference on Natural Organic Matter "From Source to Tap and Beyond", 27-29. 07. 2011., Costa Mesa, Kalifornija, SAD.
Dobrović, Slaven and Ljubas, Davor and Džeko, Alen (2011) Analiza mogućnosti opskrbe otoka Lastova pitkom vodom korištenjem LCA metodologije. = Analysis of the potable water supply alternatives of the island of Lastovo using LCA methodology. In: Hrvatske vode pred izazovom klimatskih promjena, 18-21.05.2011., Opatija, Hrvatska.
Dolenec, Marko (2011) Podzemni spremnik za ukapljeni naftni plin (UNP). = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Domazet, Goran (2011) Smanjenje umora površine zupčanika izborom odgovarajućeg ulja. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Dragojević, Roman (2011) Ojačane metalne pjene. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Drača, Nataša and Tikvica, Ana and Eljuga, Domagoj and Semenski, Damir and Brnčić, Mladen and Vukičević, Slobodan (2011) Biomehanička svojstva kostiju štakora tretiranih sevelamerom. = Biomechanical properties of bones from rats treated with sevelamer. Collegium Antropologicum, 35 (2). pp. 557-563. ISSN 0350-6134. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 6.
Drašković, Hrvoje (2011) Analiza čvrstoće steznog sustava trostupne jezgre trofaznog transformatora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Drezga, Danijel (2011) Utjecaj temperature na mehanička svojstva sendvič kompozita. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Drobilo, Luka (2011) Strukturna analiza ronilice od kompozitnih materijala primjenom metode konačnih elemenata. = Stuctural analysis of a composite made submarine using FE method. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.
Drožđan, Ivica (2011) umjeravanje mjernih traka. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Družinec, Bela (2011) Baza znanja za brzu izradu prototipova tehnologijom selektivnog laserskog sinteriranja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Dubić, Krunoslav (2011) Planiranje istovremenog kretanja dvaju robota s preklapajućim radnim prostorom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Duilo, Ivan (2011) Analiza nastajanja tekućine filma na stjenci pri niskotlačnom ubrizgavanju fluida u obliku spreja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Duić, Neven and Guzović, Zvonimir and Lund, Henrik (2011) Sustainable development of energy, water and environment systems. = Sustainable development of energy, water and environment systems. Energy, 36 (4). pp. 1839-1841. ISSN 0360-5442. Vrsta rada: Editorial. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Dunaj, Ivan (2011) Unapređenje sustava održavanja opreme u proizvodnji kabela. = Improvement of equipment maintenance system in cable production. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.
Dupor, Nikola (2011) Utjecaji karakteristika ugrađenog čelika na svojstva izgrađenog trupa broda. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubenkov, Boris.
Džafo, Deni (2011) Projektiranje elektrohidrauličkog robotskog manipulatora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Džepina, Goran (2011) Proračun nadkritičnog generatora pare. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.
El-Saleh, Adel (2011) ispitivanje mehaničkih svojstava brodograđevnog čelika na sobnoj temperaturi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubenkov, Boris.
Ergotić, Vinko (2011) Strukturna analiza teretnog prostora naftnog tankera. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.
Essert, Mario and Glumac, Nikola and Tomić, Marijana (2011) Označivanje i analiza digitaliziranog dokumenta. = Marking and analyzing of a digital document. In: 14. seminar Arhivi, knjižnice, muzeji: mogućnosti suradnje u okruženju globalne informacijske infrastructure, 17-19.11. 2010., Poreč, Hrvatska.
Essert, Mario and Mauser, Bojan (2011) Programski kôd - novi objekt web-podatka. = Source code – new object of web-data. In: 14. seminar Arhivi, knjižnice, muzeji: mogućnosti suradnje u okruženju globalne informacijske infrastructure, 17-19.11. 2010., Poreč, Hrvatska.
Fabro, Branimir (2011) Primjena ergonomskih kriterija pri konstruiranju stalka za platno projektora. = Ergonomic criteria application in the design of projector screen stand. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Faltis, Kristian (2011) Vakuumske peći za toplinsku obradu. = Vacuum heat treatment furnaces. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Ferenčak, Matija (2011) Ispitivanje dječjih bicikala prema EN 14765. = Testing of bicycles for young children according to EN 14765. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Fetahović, Bruno (2011) Razvoj vanjskog fiksatora za potkoljenicu. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš and Jurčević Lulić, Tanja.
Filetin, Tomislav (2011) Put ka hrvatskom industrijskom identitetu utemeljenom na vlastitim resursima i potencijalima. = A way towards the Croatian industrial identity based on own resources and potentials. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (3). pp. 411-416. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .
Formanek, Davor (2011) Utjecaj naknadne oksidacije na korozijsku postojanost aluminiziranog i nitriranog čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Fortuna, Petra (2011) Analiza energetske učinkovitosti klima-komora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Fortuna, Petra and Dović, Damir (2011) Energetska učinkovitost povrata topline u klima komorama. = Energy efficiency of heat recovery in air handling units. In: Klima Forum, 3. forum o hlađenju, klimatizaciji i ventilaciji, 13.-14.10.2011., Zadar, Hrvatska.
Fowler, Patrick (2011) = The analysis of the potential of material and energy recovery of municipal waste in Canada. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.
Franjić, Katarina (2011) Idejni projekt male hidroelektrane. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Frančić, Dejan (2011) Automatski proces pakiranja majoneze. = Automatic process of mayonnaise packing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Fruk, Vedran (2011) Primjena ekspertnih sustava održavanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Fulanović, Lovro (2011) Unapređenje proizvodnje malih električnih strojeva. = Improving the production of small electric machines. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šakić, Nikola.
Gajski, Matija (2011) Višeagentno programiranje robota. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Galešić, Zlatko (2011) Pouzdanost nerazornih ispitivanja mlaznih motora zrakoplova. = Reliability of non-destructive testing of aircraft jet engines. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Galić, Ivica and Tomičević, Zvonimir and Tonković, Zdenko (2011) Fatigue testing of cast steel GP240GH. = Fatigue testing of cast steel GP240GH. In: International Conference of Engineering Against Fracture /, 22-24.06.2011, Mikonos, Grčka.
Galić, Ivica and Tonković, Zdenko and Vučković, Krešimir (2011) Experimental and numerical investigation of collapse and burst pressures for a valve housing. = Experimental and numerical investigation of collapse and burst pressures for a valve housing. Strain, 47 (SUPPL.). e519-e524. ISSN 0039-2103. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 3.
Galović, Antun and Živić, Marija and Holik, Mario (2011) Analiza određivanja ogrjevnih vrijednosti goriva pri potpunom izgaranju parafinskih ugljikovodika. = Determination Analysis of Heating Values by Complete Combustion of Hydrocarbons. In: 9. Skup o prirodnom plinu, toplini i vodi / 2.Međunarodni skup o prirodnom plinu, toplini i vodi, 28.- 30. 9. 2011, Osijek, Hrvatska.
Galović, Antun and Živić, Marija and Krizmanić, Severino (2011) Entropy analysis of adiabatic mixing of three streams of different ideal gases at equal pressures and temperatures. = Entropy analysis of adiabatic mixing of three streams of different ideal gases at equal pressures and temperatures. International Journal of Exergy, 8 (3). pp. 325-332. ISSN 1742-8297. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 3.
Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan (2011) Specifičnosti i primjena plazma zavarivanja. = Specific issues and application of plasma welding. In: 6. Međunarodno znanstveno-stručno savjetovanje SBZ 2011, Slavonski Brod, Hrvatska.
Garašić, Ivica and Kralj, Slobodan and Kožuh, Zoran (2011) Suvremeni postupci MIG / MAG zavarivanja. = Modern processes of MIG / MAG welding. Zavarivanje, 54. pp. 61-67. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Garbatov, Yordan Y. and Rudan, Smiljko and Gaspar, Bruno and Guedes Soares, Carlos (2011) Fatigue assessment of marine structures. = Fatigue assessment of marine structures. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.
García-Camprubí, María and Jasak, Hrvoje and Fueyo, Norberto A. (2011) CFD analysis of cooling effects in H2-fed solid oxide fuel cells. = CFD analysis of cooling effects in H2-fed solid oxide fuel cells. Journal of Power Sources, 196 (17). pp. 7290-7301. ISSN 0378-7753. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Gayeski, Nicholas Thomas and Žakula, Tea and Armstrong, Peter Ross and Norford, Leslie Keith (2011) Empirical Modeling of a Rolling-Piston Compressor Heat Pump for Predictive Control in Low-Lift Cooling. = Empirical Modeling of a Rolling-Piston Compressor Heat Pump for Predictive Control in Low-Lift Cooling. In: Annual Conference of the American-Society-of-Heating-Refrigerating-and-Air-Conditioning-Engineers (ASHRAE), JUN 25-29, 2011, Montreal, CANADA.
Gašparić, Ksenija (2011) Svojstva drvno polimernog kompozita. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Gečevska, Valentina and Chiabert, Paolo and Čuš, Franc and Anišić, Zoran and Veža, Ivica and Ćosić, Predrag (2011) Education in product lifecycle management new innovative and competitive knowledge concept. = Education in product lifecycle management new innovative and competitive knowledge concept. In: 3rd International Scientific Conference Management of Technology – Step to Sustainable Production, 8.-10.06.2011., Bol, Hrvatska.
Gečevska, Valentina and Štefanić, Nedeljko and Veža, Ivica and Čuš, Franc (2011) Sustainable and Innovative Business Processes through Lean PLM Approach. = Sustainable and Innovative Business Processes through Lean PLM Approach. In: Industrijski sistemi, 14.-16.09.2011., Novi Sad, Srbija.
Glavica, Matej (2011) Matematički model hrvatskog sustava za proizvodnju električne energije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Gledić, Ivana (2011) Analiza širenja puk otine u brodsk oj k onstruk ciji uslijed dinamičk ih opterećenja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.
Glogović, Zlatko and Alar, Vesna and Kožuh, Zoran and Stojanović, Ivan and Kralj, Slobodan (2011) Corrosion properties of thermal sprayed aluminium (TSA) coatings deposited by powder flame spraying. = Corrosion properties of thermal sprayed aluminium (TSA) coatings deposited by powder flame spraying. Materialwissenschaft und Werkstofftechnik, 42 (3). pp. 224-228. ISSN 0933-5137. . .
Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2011) Energy efficient injection moulding of polymers. = Energy efficient injection moulding of polymers. In: 3rd International Scientific Conference Management of Technology - Step to Sustainable Production, 08-10.06.2011, Bol, Hrvatska.
Gorenc, Dalibor and Ladišić, Ivan and Krizmanić, Severino and Štih, Željko (2011) Simulacija prekidanja struje u komori visokonaponskog SF6 prekidaca 123kV. = Simulation of current interruption in high-voltage SF6 circuit breaker chamber 123 kV. In: 10. savjetovanje HRO CIGRÉ, Cavtat, 6. – 10. studenoga 2011, 06.-10.11.2011, Cavtat, Hrvatska.
Gorenec, Marko (2011) Brodski trakasti transporter ručne prtljage. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan and Šestan, Ante.
Gospić, Ivan and Boras, Ivanka and Mravak, Zoran (2011) Rad broda u nisko-temperaturnom okruženju. = Low-temperature ship operations. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 62 (4). pp. 349-365. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Gračanin, Adam (2011) Razvoj i oblikovanje nove barske stolice i njezine proizvodnje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Grbec, Vladimir (2011) Utjecaj kvalitete etalonskih pločica na umjeravanje tvrdomjera. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Franz, Mladen.
Grdenić, Ivan (2011) Analiza rezultata mjerenja sukladno normi ISO 5725:1994. = Analysis of the measurement results according to ISO 5725:1944. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Grdinić, Saša (2011) Izmjena radnog medija četverotaktnih motora - strujanje preko ventila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Grdić, Petar (2011) Unapređenje proizvodnih procesa poduzeća. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Grgec Bermanec, Lovorka (2011) Kompetentnost laboratorija 2011, Knjiga radova. = Laboratory competence 2011. [Editorial Book]
Grgec Bermanec, Lovorka and Zvizdić, Davor (2011) Pressure Intercomparison in Gas Medium Organized by HMI/FSB-LPM and CROLAB KUL. = Pressure Intercomparison in Gas Medium Organized by HMI/FSB-LPM and CROLAB KUL. In: 4th International Conference Laboratory Competence, 12-15.10.2011., Cavtat-Dubrovnik ; Hrvatska.
Grilec, Krešimir and Hrabrić, Ivan and Marić, Gojko (2011) Energy absorption of reinforced aluminium foams. = Energy absorption of reinforced aluminium foams. Strojarstvo, 53 (4). pp. 259-264. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Grilec, Krešimir and Ćurković, Lidija and Kumić, Ivan and Baršić, Gorana (2011) Erosion mechanisms of aluminium nitride ceramics at different impact angles. = Erosion mechanisms of aluminium nitride ceramics at different impact angles. Materialwissenschaft und Werkstofftechnik, 42 (8). pp. 712-717. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .
Grozdek, Marino and Lepoša, Leon and Brlek, Matija and Ćurko, Tonko (2011) Sustav hlađenja sa spremnikom hladne vode kao akumulatorom rashladnog učinka. = Cooling system with stratified chilled water thermal storage tank. In: Klima forum 2011. 3. forum o hlađenju, klimatizaciji i ventilaciji, 13-14.10.2011, Zadar, Hrvatska.
Groš, Josip and Balder, Damir and Ciglar, Damir and Math, Miljenko (2011) A comparison between the main cutting force of a turning center and that obtained by deform 3D software. = A comparison between the main cutting force of a turning center and that obtained by deform 3D software. In: International Scientific Conference on Production Engineering (13 ; 2011), 16-18.06.2011., Biograd, Hrvatska.
Grubišić, Izvor and Begović, Ermina (2011) Reliability of attribute prediction in small craft concept design. = Reliability of attribute prediction in small craft concept design. In: Sustainable maritime transportation and exploitation of sea resources. Taylor and Francis group, London, pp. 439-448. ISBN 978-0-415-62081-9
Grzelj, Vedran (2011) Uređaj za rukovanje poklopcem ispitne posude. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Grđan, Dalibor (2011) Ispitivanje mjerila toplinske energije. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Gudlin, Mihael (2011) Primjena PLM Siemens softvera uz kriterij minimalnog roka isporuke. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Guliš, Ivan (2011) Obnovljivost rezultata mjerenja dubine brazda na etalonima na etalonima hrapavosti. = Reproducibility of grooves depth measuring results on roughness reference standards. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Gunjević, Bojan (2011) Optimizacija vodovoda grada Velike Gorice. = Optimization of pipeline network of town Velika Gorica. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.
Gusić, Jan (2011) Obrada signala aeroelastičnih ispitivanja dinamike rotorskih sustava turbina. = Signal processing of aeroelastic experiments for rotodynamical systems of turbines. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijašević, Branimir.
Guzović, Zvonimir and Antoniazzi, Marco and Garofalo, Elizabetta and Alterach, Julio and Peviani, Maximo and Maradin, Marinko and Gunnar Dahlhaug, Ole and Christoforidou, Lilly and Schlager, Otmar (2011) Lessons Learned from Project SMART. = Lessons Learned from Project SMART. In: The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.
Guzović, Zvonimir and Jukić, Perica and Lončar, Dražen (2011) Determination of the Operating Regimes of CHP Turbines with Stage-wise Heating of District Heating System Water. = Determination of the Operating Regimes of CHP Turbines with Stage-wise Heating of District Heating System Water. In: World Renewable Energy Congress 2011 - Sweden, 08.-13.05.2011., Linkoping, Švedska.
Guzović, Zvonimir and Martan, Boško and Majcen, Boris (2011) Possibilities of electricity generation in the Republic of Croatia by means of low temperature geothermal sources. = Possibilities of electricity generation in the Republic of Croatia by means of low temperature geothermal sources. In: Interklima 2011 - 21st. International Symposium on Heating, Refrigerating and Air Conditioning and 10th. Conference on Thermography, 07-08.04.2011., Zagreb, Republika Hrvatska.
Guzović, Zvonimir and Matijašević, Branimir and Mihalić, Tihomir (2011) Characteristics of Non-Stationary Thermal Stresses In the Low-Pressure Part of the Rotor. = Characteristics of Non-Stationary Thermal Stresses In the Low-Pressure Part of the Rotor. In: 15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” - TMT 2011, 12.-18.09.2011., Prag, Češka.
Guzović, Zvonimir and Rašković, Predrag and Cvetković, Svetislav (2011) Exergy Analysis of Electricity Generation by the Medium Temperature Geothermal Resources: Geothermal Power Plant Velika Ciglena Case Study. = Exergy Analysis of Electricity Generation by the Medium Temperature Geothermal Resources: Geothermal Power Plant Velika Ciglena Case Study. In: The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25.-29.09.2011., Dubrovnik, Hrvatska.
Habla, Florian and Marschall, Holger and Hinrichsen, Olaf and Dietsche, Laura and Jasak, Hrvoje and Favero, Jovani L. (2011) Numerical simulation of viscoelastic two-phase flows using openFOAM®. = Numerical simulation of viscoelastic two-phase flows using openFOAM®. Chemical Engineering Science, 66 (22). pp. 5487-5496. ISSN 0009-2509. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Hadžić, Neven and Senjanović, Ivo and Vladimir, Nikola (2011) Povratna krutost u hidroelastičnoj analizi pomorskih konstrukcija. = Restoring stiffness in the hydroelastic analysis of marine structures. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 62 (3). pp. 265-279. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Hanžek, Tomislav (2011) Proračun i mjerenje toplinskih karakteristika niskotemperaturnog toplovodnog kotla. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Haramina, Tatjana and Jelavić, Tomislav and Šolić, Tomislav and Katalinić, Marko and Pilipović, Ana (2011) Analiza mogućnosti recikliranja diskontinuiranih E-staklenih vlakana. = Analysis of recycling possibilities of discontinuous E-glass fibres. Polimeri : časopis za plastiku i gumu, 32 (2). pp. 52-61. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Haramina, Tatjana and Pilipović, Ana and Jelavić, Tomislav and Šolić, Tomislav (2011) Recikliranje otpada od diskontinuiranih E-staklenih vlakana u građevinskim materijalima. = Recycling of discontinuous E-glass fibers in construction materials. In: International conference on materials, tribology, recycling, 29.06 - 01.07.2011., Vela Luka, Hrvatska.
Harman, Blahoslav and Opalić, Milan and Vereš, Miroslav (2011) Deterministic and probabilistic methods in determination of correct mating cylindrical teeth profiles. = Deterministic and probabilistic methods in determination of correct mating cylindrical teeth profiles. Strojarstvo, 53 (3). pp. 191-197. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Havaić, Nikola (2011) Automobilski rashladni uređaj. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Hegedić, Miro (2011) Vitko upravljanje projektima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Heinonen, Martti and Zvizdić, Davor and Šestan, Danijel (2011) Intercomparison of the Dew-Point Temperature Realizations at LPM and MIKES in the Range from −70 ◦C to +20 ◦C. = Intercomparison of the Dew-Point Temperature Realizations at LPM and MIKES in the Range from −70 ◦C to +20 ◦C. International journal of thermophysics, 33 (8/9). pp. 1451-1457. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.
Herceg, Hrvoje (2011) Primjena PROMETHEE metode u višekriterijalnom odlučivanju. = Application of PROMETHEE method in multi-criteria decision making. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Hermans, R.M. and Bosch, P.P.J. van den and Jokić, Andrej and Giesbertz, P. and Boonekamp, P. and Virag, A. (2011) Congestion management in the deregulated electricity market: An assessment of locational pricing, redispatch and regulation. = Congestion management in the deregulated electricity market: An assessment of locational pricing, redispatch and regulation. In: International Conference on the European Energy Market 2011, 25-27.05.2011., Zagreb, Hrvatska.
Hermans, R.M. and Lazar, M and Jokić, Andrej and Gielen, R.H. (2011) On parameterized stabilization of networked dynamical systems. = On parameterized stabilization of networked dynamical systems. In: 18th IFAC World Congress 2011, 28.08.-02.09.2011., Milano, Italija.
Hermans, R.M. and Lazar, Mircea and Jokić, Andrej (2011) Distributed predictive control of the 7-Machine CIGRÉ power system. = Distributed predictive control of the 7-Machine CIGRÉ power system. In: 2011 American Control Conference, ACC 2011, 29.06.-01.07.2011., San Francisco, SAD.
Hlupić, Slavko (2011) Hidraulički sustavi s vodom kao medijem. = Water hydraulic systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.
Holik, Mario and Zmaić, Željko and Živić, Marija and Galović, Antun (2011) Numerički model termodinamičkog procesa u izmjenjivaču topline. = Numerical model of the thermodynamic process in the heat exchanger. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.
Hornung, Krunoslav and Stojkov, Marinko and Hnatko, Emil and Kljajin, Milan and Opalić, Milan (2011) Ušteda prirodnog plina uporabom sunčeve energije. = Saving natural gas using solar energy. In: 2nd International Natural Gas , Heat and Water Conference., 28-30.9.2011., Osijek, Hrvatska.
Horvat, Mario (2011) Invalidska kolica - utvrđivanje stupnja prilagodljivosti korisniku. = Wheelchairs - determination of the adaptability level to user. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Horvat, Tomislav (2011) Dvokanalni digitalni osciloskop (engl. Two channel digital oscilloscope). = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Hoster, Josip (2011) Bezmrežna numerička metoda za analizu ploča. = Meshless numerical method for analysis of plates. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sorić, Jurica.
Hranj, Nataša (2011) Pomoćni kontroler robota Mitsubishi RM501. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Hrgetić, Mario and Deur, Joško and Pavković, Danijel and Barber, Phil (2011) Adaptive EKF-Based estimator of sideslip angle using fusion of inertial sensors and GPS. = Adaptive EKF-Based estimator of sideslip angle using fusion of inertial sensors and GPS. SAE Intenational Journal of Passenger Cars - Mechanical Systems, 4 (1). pp. 700-712. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Hrgetić, Mario and Deur, Joško and Pavković, Danijel and Barber, Phil (2011) Adaptive EKF-based estimator of sideslip angle using fusion of inertial sensors and GPS. = Adaptive EKF-based estimator of sideslip angle using fusion of inertial sensors and GPS. In: SAE 2011 International Congress and Exposition, 12-14.04.2011., Detroit, MI, United States.
Hrgovan, Iva (2011) Vjetroturbina za pogon električnog generatora. = Wind turbine for electric generator drive. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Hrovat, Davor and Tseng, Hongtei Eric and Lu, Jianbo and Deur, Joško and Assadian, Francis and Borrelli, Francesco and Falcone, Paolo (2011) Vehicle controls. = Vehicle controls. In: The Control Handbook (Second Edition): Control System Applications. The Electrical Engineering Handbook Series . CRC Press, Boca Raton, FL, USA, pp. 3-1. ISBN 978-1-4200-7360-7
Hršak, Nikola (2011) Razvoj plastomernog poklopca i odgovarajućeg kalupa za injekcijsko prešanje. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Hubak, Andro (2011) Analiza naprezanja nosive rešetke trkaćeg rally vozila te smanjenja mase rešetke promjenom njezine strukture. = Stress analysis of body structure of an off-road race car and mass reduction of body structure due to its structural change. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahalec, Ivan.
Idek, Viktor (2011) Primjena mjernog sustava Aramis u analizi deformacija kod zavarivanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Ilijevski, Živko and Završki, Ivica and Kitarović, Petra and Anić Vučinić, Aleksandra and Krapinec, Zvonimir and Kelava, Filip (2011) 20 MWel biomass power plant "Koprivnički Ivanec" in Croatia designed to achieve integrated prevention and control of pollution. = 20 MWel biomass power plant "Koprivnički Ivanec" in Croatia designed to achieve integrated prevention and control of pollution. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Ilić, Marko and Schauperl, Zdravko and Šolić, Sanja (2011) Karakterizacija izotermički poboljšanog nodularnog lijeva. = Characterization of austempered ductile iron. In: Međunarodno savjetovanje MATRIB 2011, materijali, tribologija, recikliranje, Vela Luka, Hrvatska.
Iličić, Kristijan (2011) Parametri za detekciju i lociranje puknuća cijevi vodoopskrbnog sustava. = The parameters of detection and location of the pipe burst of the water supply system. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.
Irsag, Bojan (2011) Modeliranje energetske potrošnje turističko ugostiteljskog sektora u ovisnosti o tehnološkim, zakonskim te financijskim mehanizmima. = Energy demand side modeling of Croatian-catering trade sector based on technological, legal and financial mechanisms. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Irsag, Bojan and Pukšec, Tomislav and Duić, Neven (2011) Long term energy demand projection and potential for energy savings of Croatian tourist-catering trade sector. = Long term energy demand projection and potential for energy savings of Croatian tourist-catering trade sector. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011, Dubrovnik, Hrvatska.
Ivanec, Tomislav (2011) Svojstva kompozita na bazi poli(oksimetilena) ojačanog recikliranim staklenim vlaknima. = Properties of poly(oxymethylene) based composite with recycled glass fibers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.
Ivaniš, Davor (2011) Karakterizacija prevlaka dobivenih HVOF postupkom. = Characterisation of HVOF coatings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Ivaniš, Davor and Schauperl, Zdravko and Šolić, Sanja (2011) Otpornost na trošenje prevlaka dobivenih HVOF postupkom. = Wear resistance of HVOF coatings. In: Međunarodno savjetovanje MATRIB 2011, materijali, tribologija, recikliranje, Vela Luka, Hrvatska.
Ivanišević, Marko (2011) Trendovi razvoja industrije polimera u Republici Hrvatskoj. = Developement trends in the Croatian plastics industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Španiček, Đurđica.
Ivanković, Luka (2011) Mapiranje proizvodnih procesa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Ivanović, Vladimir and Deur, Joško and Kostelac, Milan and Pentek, Tibor and Hrovat, Davor (2011) Tyre friction behaviour under abrupt wheel torque transients on slippery road surfaces : experimental analysis and modelling. = Tyre friction behaviour under abrupt wheel torque transients on slippery road surfaces : experimental analysis and modelling. Vehicle system dynamics, 49 (10). pp. 1623-1647. ISSN 0042-3114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 5.
Ivanović, Vladimir and Deur, Joško and Milutinović, Milan and Tseng, Hongtei Eric (2011) Dynamic model of dual clutch lever-based electromechanical actuator. = Dynamic model of dual clutch lever-based electromechanical actuator. In: ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, 31.10-02.11.2011., Arlington, VA, United States.
Ivančević, Darko and Smojver, Ivica (2011) Hybrid approach in bird strike damage prediction on aeronautical composite structures. = Hybrid approach in bird strike damage prediction on aeronautical composite structures. Composite Structures, 94 (1). pp. 15-23. ISSN 0263-8223. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Ivančević, Darko and Šarović, Kristina and Smojver, Ivica (2011) Usporedba kriterija popuštanja primijenjenih na ojačane avionske kompozitne panele. = Comparison of Failure Criteria Applied on Stiffened Airplane Composite Panels. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.
Ivko, Slaven (2011) opce karakteristike skladista hladnjaca. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Ivković, Ana (2011) Matematičko modeliranje i regulacija procesa rasplinjavanja ugljena. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Ivušić, Vinko and Franz, Mladen and Španiček, Đurđica and Ćurković, Lidija (2011) Materijali I. = Materials I. Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-11-2 (Unpublished)
Jaklenec, Tomislav (2011) Alatni strojevi za izradu provrta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Jakopčić, Mirko and Grilec, Krešimir (2011) Utjecaj pregrijavanja cijevi topničkog oružja na otpornost prema abrazijskom trošenju materijala. = Influence of artillery weapon barrel superheat on abrasion wear resistance of material. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2). pp. 173-177. ISSN 1330-3651. Kvartili JCR: Q4 (2011). .
Jakšetić, Julije and Pečarić, Josip (2011) Means involving linear functionals and n-convex functions. = Means involving linear functionals and n-convex functions. Mathematical Inequalities and Applications, 14 (3). pp. 657-675. ISSN 1331-4343. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .
Jakšić, Marko (2011) Povezivanje 3D mjernog uređaja "FERRANTI" s cad alatima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahović, Sanjin.
Jakšić, Tomislav and Dović, Damir and Petošić, Antonio (2011) Test Rig as Development Incentive. = Test Rig as Development Incentive. In: Interklima '11, 21 Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 10. Konferencija o termografiji,, 07.-08.04.2011., Zagreb, Hrvatska.
Jambrak, Tomislav (2011) Prijedlog uvođenja informacijskog sustava održavanja. = Proposal for introduction of IT maintenance systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Jambrek, Filip (2011) Primjena polimernih materijala za izradu reduktora. = Appliction of polymer materials for reduction gears. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Jambrek, Filip and Pilipović, Ana and Šercer, Mladen (2011) Application of polymer materials for reducer. = Application of polymer materials for reducer. In: TEAM 2011 (Technics, Education, Argiculture, Management), 3rd International Scientific and Expert Conference of the International TEAM Society, 19.-21.10.2011., Trnava, Slovačka.
Jandrić, Ivan (2011) Horizontalno upravljanje bespilotnim letjelicama. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Jankovich, Dennis (2011) Ispitivanje komora za termičku obradu polutrajnih mesnih proizvoda. = Testing chambers for thermal processing of semi-durable meat products. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Jantol, Danijel (2011) Provedba energetskog pregleda i izrada energetskog certifikata južne zgrade FSB-a. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Jantol, Danijel and Dović, Damir (2011) Provedba energetskog pregleda i izrada energetskog certifikata južne zgrade FSB-a. = Energy audit and energy certificate of the FSB southern building. In: Klima Forum, 3. forum o hlađenju, klimatizaciji i ventilaciji, 13.-14.10.2011., Zadar, Hrvatska.
Jantol, Danijel and Dović, Damir and Švaić, Srećko (2011) Primjena termografije u zgradarstvu. = In: Interklima '11, 21 Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 10. Konferencija o termografiji,, 07.-08.04.2011., Zagreb, Hrvatska.
Jarak, Tomislav and Hoster, Josip and Sorić, Jurica (2011) Rubni uvjeti sila u bezmrežnoj mješovitoj kolokacijskoj formulaciji. = Force boundary conditions in a meshless mixed collocation formulation. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011, Slavonski Brod, Hrvatska.
Jarak, Tomislav and Sorić, Jurica (2011) On shear locking in MLPG solid-shell approach. = On shear locking in MLPG solid-shell approach. CMES - Computer Modeling in Engineering and Sciences, 81 (2). pp. 157-193. ISSN 1526-1492. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 2.
Jasak, Hrvoje and Beaudoin, Martin (2011) OpenFOAM turbo tools: from general purpose CFD to turbomachinery simulations. = OpenFOAM turbo tools: from general purpose CFD to turbomachinery simulations. In: ASME-JSME-KSME Joint Fluids Engineering Conference 2011, 24-29.07.2011., Hamamatsu, Shizuoka, Japan.
Jeftić, Marko (2011) Kombinacijski punjač diskretnih krutnina. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Jeličić, Anamarija (2011) Prijedlog konstrukcije osobnog skidača zubnog kamenca. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Jerbić, Bojan (2011) Mediji i znanost (i obrazovanje). = Media and science (and education). In: Mediji i znanost, 20.05.2010., Zagreb, Hrvatska.
Jerbić, Bojan and Ćurković, Petar and Stipančić, Tomislav (2011) Automatska montaža dvoručnim robotom. = Dual arm robot automated assembly. In: Inovation + Enterpreneurship = Competitiveness, 15.-16. 09. 2011, Osijek, Republika Hrvatska.
Jezl, Domagoj (2011) Analiza montaže postolja željezničkih vozila. = Analysis of assembly of the bogies of railway vehicles. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Jokić, Marko and Stegić, Milenko and Butković, Mirko (2011) Reduced-order multiple tuned mass damper optimization: A bounded real lemma for descriptor systems approach. = Reduced-order multiple tuned mass damper optimization: A bounded real lemma for descriptor systems approach. Journal of Sound and Vibration, 330 (22). pp. 5259-5268. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Jokić, Marko and Stegić, Milenko and Vranković, Nikola (2011) A Novel Algorithm for Bearing Stiffness Optimization. = A Novel Algorithm for Bearing Stiffness Optimization. In: 13th World Congress in Mechanism and Machine Science, 19-25.06.2011., Guanajuato, Mexico.
Jović, Ivan (2011) Eksperimentalno i numeričko optimiranje sustava za navodnjavanje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Džijan, Ivo.
Jug, Matija and Boras, Ivanka and Beljo Lučić, Ružica and Čavlović, Anka Ozana and Šafran, Branimir (2011) Mogućnosti primjene infracrvene termografije u istraživanjima procesa mehaničke obrade drva. = Possibilities of infrared thermography implementation in the research of the mechanical wood processing. In: Ambienta, 21.10.2011., Zagreb, Hrvatska.
Jukić, Ivan (2011) Stabilnost acetabularnog umetka endoproteze zgloba kuka. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Jularić, Dalibor (2011) Sistematizacija gubitaka u proizvodnim i uslužnim poduzećima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Juraga, Ivan and Alar, Vesna (2011) Korozijska oštećenja i zaštita ukopane opreme pod tlakom. = In: 8. hrvatski seminar o tlačnoj opremi, 19.05.2011., Zagreb, Croatia.
Juraga, Ivan and Alar, Vesna and Šimunović, Vinko and Stojanović, Ivan (2011) Influence of deformation induced martensite on brittleness of austenitic stainless steel. = Influence of deformation induced martensite on brittleness of austenitic stainless steel. In: 22nd DAAAM, 23-26.11.2011., Beč, Austrija.
Juretić, Hrvoje and Dobrović, Slaven and Ružinski, Nikola and Lovrić, Josip and Pećarević, Marijana and Mikuš, Josip and Crnčević, Marija and Marčelja, Esme-Johanna and Marijanović Rajčić, Marija and Širac, Siniša and Cooper, William John and Grewell, David and van Leeuwen, Joep (Hans) (2011) Pilot studies of ozonation for inactivation of Artemia salina nauplii in ballast water. = Pilot studies of ozonation for inactivation of Artemia salina nauplii in ballast water. Ozone: Science and Engineering, 33 (1). pp. 3-13. ISSN 0191-9512. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 13.
Jurić, Ivan (2011) Hlađenje pšenice u čeličnim silosima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Jurić, Jerko (2011) Projekt motora za utrke MotoGP. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Kajmić, Krešimir (2011) Prikaz i analiza skladišnog sustava poduzeća. = The overview and analysis of warehousing system case. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Kalazić, Ivan (2011) Konusna drobilica za kamen. = Cone crusher for stone. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
Kallioras, Andreas and Ružinski, Nikola (2011) Special Issue: Sustainable Development of Energy, Water and Environment Systems. = Special Issue: Sustainable Development of Energy, Water and Environment Systems. Water Resources Management, 25 (12). pp. 2917-2918. ISSN 0920-4741. Vrsta rada: Editorial. Kvartili JCR: Q1 (2011). .
Kantolić, Krunoslav (2011) Projekt grijanih cijevi za međusobno povezivanje opreme za mjerenje vlažnosti zraka. = Design of heated tubes for air flow between humidity measurement equipment. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Kapor, Frankica and Jelić, Petar and Pustaj, Gordana and Alar, Vesna (2011) Usporedba djelotvornosti različitih inhibitora korozije u zaštiti ugljičnog čelika. = Comparing the efficiency of different corrosion inhibitors for the corrosion protection of carbon steel. In: Međunarodno savjetovanje, MATRIB 2011., 29.06.-01.07.2011., Vela Luka, Hrvatska.
Karalić, Branko (2011) Učenje neuronskih mreža primjenom evolucijskih algoritama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.
Karlo, Prpić (2011) Izrada varijantnog modela aluplast okvira vatrogasnog vozila. = Creating of the aluplast frame of the fire fighting vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Karšaj, Igor and Sorić, Jurica and Humphrey, Jay D. (2011) Numeričko modeliranje rasta i promjene strukture slojeva stijenke aorte. = Numerical modeling of aortic growth and remodeling. In: Četvrti susret Hrvatskog društva za mehaniku, 10.6.2011., Slavonski Brod, Hrvatska.
Kasać, Josip and Deur, Joško and Novaković, Branko and Kolmanovsky, Ilya and Assadian, Francis (2011) A conjugate gradient-based BPTT-like optimal control algorithm with vehicle dynamics control Application. = A conjugate gradient-based BPTT-like optimal control algorithm with vehicle dynamics control Application. IEEE Transactions on Control Systems Technology, 19 (6). pp. 1587-1595. ISSN 1063-6536. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 5.
Kasać, Josip and Novaković, Branko and Milić, Vladimir (2011) On equivalence between internal and external model-based repetitive learning controllers for nonlinear passive systems. = On equivalence between internal and external model-based repetitive learning controllers for nonlinear passive systems. Asian Journal of Control, 13 (1). pp. 15-24. ISSN 1561-8625. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 3.
Kasupović, Enes (2011) Utvrđivanje otpornosti na umor površine. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Katana, Branko (2011) Postrojenje za obradu plodova kestena. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Katić, Marko and Šimunović, Vedran and Baršić, Gorana (2011) Modification of a zeiss gauge block interferometer. = Modification of a zeiss gauge block interferometer. In: The 22nd DAAAM International World Symposium, 23-26.11.2011., Beč, Austrija.
Katić, Marko and Šimunović, Vedran and Mudronja, Vedran (2011) Modification of Kosters Primary Gauge Block Interferometer. = Modification of Kosters Primary Gauge Block Interferometer. In: 13th International scientific conference on production engineering CIM2011, 16-18.06.2011., Biograd, Hrvatska.
Kekelj, Matija (2011) Upravljanje brzinom vrtnje hidrauličkog motora pomoću PLC-a. = Speed control of a hydraulic motor using PLC. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Keran, Zdenka and Math, Miljenko and Grizelj, Branko (2011) Eksperimentalna i numerička analiza plitkog gravurnog kovanja kao procesa mikrooblikovanja. = Experimental and numerical analysis of coining process using microforming approach. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (4). pp. 505-510. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .
Keran, Zdenka and Math, Miljenko and Piljek, Petar (2011) Modified hydraulic bulging for determination of flow stress curve. = Modified hydraulic bulging for determination of flow stress curve. In: 10th International Conference on Technology of Plasticity, ICTP 2011, 25-30. 10. 2011., Aachen; Germany.
Keran, Zdenka and Math, Miljenko and Piljek, Petar (2011) Numerical investigation of friction coefficient in coining processes of the same part in different grain sizes. = Numerical investigation of friction coefficient in coining processes of the same part in different grain sizes. In: 13th International Scientific Conference on Production Engineering, 16-18.06.2011., Biograd, Hrvatska.
Keran, Zdenka and Math, Miljenko and Škunca, Marko (2011) Determination of flow stress curve by modified hydraulic bulging. = Determination of flow stress curve by modified hydraulic bulging. Transactions of FAMENA, 35 (3). pp. 13-26. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .
Keser, Matej (2011) Tlačno ispitivanje ojačanih aluminijskih pjena. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Klaić, Miho (2011) Prijenosni stroj za graviranje kamena. = Portable stone carving machine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Klinec, Marko (2011) Senzor prisutnosti za Mitsubishi RM501 Robot. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Klisović, Nikola (2011) Glasovno upravljanje robotom. = Robot control by voice. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Kljajin, Milan and Opalić, Milan and Hnatko, Emil and Stojkov, Marinko (2011) Importance of design for recycling electronic and electrical equipment. = Importance of design for recycling electronic and electrical equipment. In: I International Conference "ECOLOGY OF URBAN AREAS 2011", 30.09.2011, Zrenjanin, Srbija.
Klobučar, Danijel (2011) Primjena Locati-jeve metode za određivanje trajne zarezne čvrstoće materijala X21CrMoV12-1. = Application of Locati method for determining the enduring tear strenght of material X21CrMoV12-1. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Knežević, Predrag and Grgurević, Lovro and Ugleśić, Vedran and Grgurević, Jaka and Drvar, Nenad and Kodvanj, Janoš (2011) Maxillary Fragment Stabilization After Le Fort I Fracture With 1 Screw Pair per Plate. = Maxillary Fragment Stabilization After Le Fort I Fracture With 1 Screw Pair per Plate. Journal of Oral and Maxillofacial Surgery, 69 (4). pp. 1166-1174. ISSN 0278-2391. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 6.
Knežić, Željko (2011) Temelj i spojničko vratilo električne kočnice Zölllner A100 DAM. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Kobas, Goran (2011) Proračun čvrstoće i stabilnosti spremnika za šljunak. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sorić, Jurica.
Kobeščak, Josip (2011) Analiza mehaničkih svojstava bioloških letećih sustava. = Mechanical properties analysis of biological flying systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Kocijan, Gordan (2011) Metode i sredstva za gašenje u toplinskoj obradi metala. = Methods and quenchants in the heat treatment of metals. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Kodba, Davor (2011) Projek sustava klimatizacije industrijske hale. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Kolar, Davor (2011) Oblikovanje sustava komisioniranja s vertikalnim podiznim modulima. = Design of order-picking systems with VLMs. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Kolar, Davor and Đukić, Goran (2011) Design of Order-Picking Systems with VLM-s. = Design of Order-Picking Systems with VLM-s. In: 3rd International Scientific Conference Management of Technology Step to Sustainable Production, 8.-10.06.2011., Bol (Brač), Hrvatska.
Kolesar, Nino (2011) Priprema vode za sustave toplinskih mreža. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.
Kos, Josip (2011) Trokordinatno mjerenje trošenja zupčanika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Kostanjevec, Marija and Sajko, Dino and Rede, Vera and Ćurković, Lidija (2011) Kemijska postojanost keramičkih dimovodnih cijevi. = Chemical stability of ceramics chimney flue pipes. In: MATRIB 2011, 29.06.-01.07.2011., Vela Luka, Hrvatska.
Kostelac, Milan and Tepić, Jovan and Tanackov, Ilija (2011) Justification of the application of tightening elements in the shaft-hub joint. = Justification of the application of tightening elements in the shaft-hub joint. In: MOTSP 2011 Management of Technology Steep to Sustainable Production, 08-10.06.2011., Bol, Hrvatska.
Kostelac, Milan and Tepić, Jovan and Ćular, Nedjeljko (2011) Justification of the application of tightening elements in the shaft-hub joint. = Justification of the application of tightening elements in the shaft-hub joint. Metalurgija, 50 (1). pp. 57-61. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Kotarski, Denis (2011) Regulacija sile nasjedanja naftnog bušenog vretena. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.
Kovačec, Miroslav and Pilipović, Ana and Štefanić, Nedeljko (2011) Impact of glass cullet on the consumption of energy and environment in the production of glass packaging material. = Impact of glass cullet on the consumption of energy and environment in the production of glass packaging material. In: Proceedings of the 9th WSEAS International Conference on Environment, Ecosystems and Development - EED '11, 29.-31.12.2011., Montreux, Švicarska.
Kovačec, Miroslav and Tošanović, Nataša and Štefanić, Nedeljko (2011) Recycling of glass packaging in Republic of Croatia. = Recycling of glass packaging in Republic of Croatia. In: Proceedings of the 9th WSEAS International Conference on Environment, Ecosystems and Development - EED '11, 29.-31.12.2011., Montreux, Švicarska.
Kovačević, Antonijo (2011) Postprocesori za petoosne obradne centre. = Postprocessors for 5-axis machining centers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Kovačić, Krešimir (2011) Modeliranje toplinskih naprezanja u rotoru industrijske parne turbine. = Modeling of thermal stresses in industrial steam turbine rotor. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Kovačić, Milan (2011) Cikličko ispitivanje pouzdanosti dječijeg bicikla. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Kovačić, Tomislav (2011) Matematički model dinamike procesa u isparivaču ORC postrojenja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Kozarac, Darko and Sjerić, Momir and Ilinčić, Petar (2011) Numerical study of influencing factors and the possibility to use vibe parameters in crank-angle resolved HCCI control models. = Numerical study of influencing factors and the possibility to use vibe parameters in crank-angle resolved HCCI control models. In: SAE 2011 World Congress and Exhibition, 12-14. 4. 2011., Detroit, MI; United States.
Kozarac, Darko and Sjerić, Momir and Lulić, Zoran (2011) A numerical study of boundaries of the operating range of the HCCI combustion. = A numerical study of boundaries of the operating range of the HCCI combustion. In: 13th EAEC European Automotive Congress, The Automobile in the Second Decade: Sharing all Energy Solutions, 13-16.06.2011., Valencia, Španjolska.
Kozarac, Darko and Sjerić, Momir and Tomić, Rudolf (2011) Calculation of vibe parameters for HCCI combustion by using a six-zone detail chemical kinetics model. = Calculation of vibe parameters for HCCI combustion by using a six-zone detail chemical kinetics model. In: 5th AVL Advanced Simulation Technologies International User Conference, 28.-30.6.2011., Graz, Austrija.
Kozmar, Hrvoje (2011) Characteristics of natural wind simulations in the TUM boundary layer wind tunnel. = Characteristics of natural wind simulations in the TUM boundary layer wind tunnel. Theoretical and Applied Climatology, 106 (1-2). pp. 95-104. ISSN 0177-798X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 1.
Kozmar, Hrvoje (2011) Truncated vortex generators for part-depth wind-tunnel simulations of the atmospheric boundary layer flow. = Truncated vortex generators for part-depth wind-tunnel simulations of the atmospheric boundary layer flow. Journal of Wind Engineering and Industrial Aerodynamics, 99 (2-3). pp. 130-136. ISSN 0167-6105. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 1.
Kozmar, Hrvoje (2011) Wind-tunnel simulations of the suburban ABL and comparison with international standards. = Wind-tunnel simulations of the suburban ABL and comparison with international standards. Wind and Structures, An International Journal, 14 (1). pp. 15-34. ISSN 1226-6116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 1.
Kozmar, Hrvoje (2011) An alternative approach to experimental simulation of wind characteristics in urban environments. = An alternative approach to experimental simulation of wind characteristics in urban environments. In: Urban Environmental Pollution 2010, 20-23.6.2010., Boston, MA; United States.
Kozmar, Hrvoje (2011) An alternative approach to experimental simulation of wind characteristics in urban environments. = An alternative approach to experimental simulation of wind characteristics in urban environments. Procedia Environmental Sciences, 4. pp. 43-50. ISSN 1878-0296. . Točan broj autora: 1.
Kozmar, Hrvoje and Butler, Kyle and Kareem, Ahsan (2011) Effects of the cross-wind gust strength on vehicle aerodynamics. = Effects of the cross-wind gust strength on vehicle aerodynamics. In: 13th International Conference on Wind Engineering, 11.-15.07.2011., Amsterdam, Nizozemska.
Kozmar, Hrvoje and Jokić, Marko and Stegić, Milenko and Butler, Kyle and Kareem, Ahsan (2011) A data-driven model for transient cross-wind loads on vehicles. = A data-driven model for transient cross-wind loads on vehicles. In: 13th International Conference on Wind Engineering, 11.-15.07.2011., Amsterdam, Nizozemska.
Koštan, Mario (2011) Tijek izrade prototipa ultrazvučne sonde za nuklearno energetsko postrojenje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Krajačić, Goran and Duić, Neven and Da Graça Carvalho, Maria (2011) How to achieve a 100% RES electricity supply for Portugal? = How to achieve a 100% RES electricity supply for Portugal? Applied Energy, 88 (2). pp. 508-517. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Krajačić, Goran and Duić, Neven and Lončar, Dražen and Raguzin, Igor (2011) Large Scale Integration of Wind Energy by Financial Mechanisms for Support of Pumped Hydro Storage Installations. = Large Scale Integration of Wind Energy by Financial Mechanisms for Support of Pumped Hydro Storage Installations. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.
Krajačić, Goran and Duić, Neven and Tsikalakis, Antonis and Zoulias, Manos and Caralis, George and Panteri, Eirini and Carvalho, Maria Graça (2011) Feed-in tariffs for promotion of energy storage technologies. = Feed-in tariffs for promotion of energy storage technologies. Energy Policy, 39 (3). pp. 1410-1425. ISSN 0301-4215. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 7.
Krajačić, Goran and Duić, Neven and Zmijarević, Zlatko and Mathiesen, Brian Vad and Anić Vučinić, Aleksandra and Da Graça Carvalho, Maria (2011) Planning for a 100 independent energy system based on smart energy storage for integration of renewables and CO2 emissions reduction. = Planning for a 100 independent energy system based on smart energy storage for integration of renewables and CO2 emissions reduction. Applied Thermal Engineering, 31 (13). pp. 2073-2083. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 6.
Krajačić, Goran and Šakić, Nikola and Duić, Neven and Lončar, Dražen (2011) Prediction of Wind Power Plants Energy Production by use of the Publicly Available Wind Measurement Data. = Prediction of Wind Power Plants Energy Production by use of the Publicly Available Wind Measurement Data. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.
Krajinović, Mario (2011) Mehanička svojstva aluminij oksidne keramike. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Krajinović, Mario and Marić, Gojko and Šnajdar, Mateja (2011) Design of natural fiber reinforced polymer composite. = Design of natural fiber reinforced polymer composite. Strojarstvo, 53 (4). pp. 265-270. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Krajna, Tamara and Markulin, Helena (2011) Nabava knjižnične građe u visokoškolskim knjižnicama. = Acquisition of library materials in academic libraries. Vjesnik Bibliotekara Hrvatske, 54 (3). pp. 21-42. ISSN 0507-1925. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Krajna, Tamara and Zabjan Bogut, Andrea (2011) Trideset godina časopisa Polimeri: Bibliometrijske značajke kategoriziranih radova. = Thirty years of the Journal Polimeri: Bibliometric features of categorized articles. Polimeri : časopis za plastiku i gumu, 32 (2). pp. 69-75. ISSN 0351-1871. . .
Kranjčec, Stjepan (2011) Naprava za rezanje bloka papira. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Krizmanić, Ana-Marija (2011) Projekt grijanja obiteljske kuće. = Design of the heating system for a single-family residence. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Krizmanić, Severino (2011) Novi algoritam za povezivanje polja brzine i tlaka. = A new pressure-velocity coupling algorithm. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.
Krizmanić, Severino and Veliki, Tomislav and Zvizdić, Davor (2011) Modeling of Transient Heat Transfer in Zinc Fixed-Point Cell. = Modeling of Transient Heat Transfer in Zinc Fixed-Point Cell. International journal of thermophysics, 32 (1). pp. 326-336. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 3.
Krištić, Ivica (2011) Određivanje prostorne raspodjele jakosti magnetskog polja. = Determining coordinate dependance of magnetic field. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Križan, Stjepan (2011) Implementacija konstrukcijskog znanja u računalni 3D model proizvoda. = Design knowledge implementation in 3D CAD model of the product. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Križić, Josip (2011) Idejni projekt porivnog sustava ribarskog broda. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šestan, Ante.
Krpan, Mladen (2011) Analiza pronalaženja i karakterizacije pukotina primjenom nerazornih ispitivanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Krsnik, Bojan (2011) Utjecaj veličine erozivnih čestica na erozijsku otpornost aluminij oksidne keramike. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Kuhta, Nives (2011) Analiza nestacionarnog strujanja zraka oko 2-D cilindra kvadratnog i kružnog poprečnog presjeka. = Analysis of unsteady airflow around a 2-D cylinder with square and circular cross section. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Kukec, Tamara (2011) Međulaboratorijska usporedba rezultata umjeravanja mjerila tlaka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Kunica, Zoran and Štampar, Tomislav and Bukal, Stjepan and Zorc, Davor (2011) Braitenberg's robots in education and for research. = Braitenberg's robots in education and for research. In: 1st Regional Conference - Mechatronics in Practice and Education MECH - CONF 2011, 08-10.12.2011., Subotica, Srbija.
Kurajica, Stanislav and Tkalčec, Emilija and Matijašić, Gordana and Ćurković, Lidija and Schauperl, Zdravko and Šipušić, Juraj and Mandić, Vilko (2011) Influence of agglomeration and contamination in the course of amorphous powder grinding on structure and microstructure of sintered mullite. = Influence of agglomeration and contamination in the course of amorphous powder grinding on structure and microstructure of sintered mullite. Croatica Chemica Acta, 84 (1). pp. 63-71. ISSN 0011-1643. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .
Kuzman, Vesna (2011) Usporedba konvencionalnog MAG i RMT MAG zavarivanja. = Comparison of conventional MAG and RMT MAG welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Kučić, Krešimir (2011) Zaštita balastnih spremnika od korozije. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Kučiš, Tomislav (2011) Samopodesivi PID regulator zasnovan na adaptivnom Kalmanovom filtru i relejnom članu. = Autotuning PID controller based on adaptive Kalman filter and relay term. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zorc, Davor.
Lambaša, Stipe (2011) numerički proračun njihanja broda na harmonijskom valu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Lübben, Thomas (2011) End-quench hardenability test for gas quenched steels. = End-quench hardenability test for gas quenched steels. Strojarstvo, 53 (1). pp. 33-37. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Landek, Darko and Župan, Josip and Filetin, Tomislav (2011) Systematical analysis of cooling curves for liquid quenchants. = Systematical analysis of cooling curves for liquid quenchants. In: The IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.
Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2011) Mikromehaničko modeliranje procesa deformiranja. = In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.
Lisičar, Marko (2011) Utjecaj dubokog hlađenja na popuštanje čelika PM S390 MC. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Lisjak, Dragutin and Vuković, Danijel and Alić Kostešić, Vesna (2011) Metoda AHP kao alat za izbor opreme. = AHP method as a tool for equipment selection. In: Međunarodno savjetovanje Hrvatskog društva održavatelja (18 ; 2011), 23.-25.05.2010., Zagreb, Hrvatska.
Lisjak, Dragutin and Ćosić, Predrag and Milčić, Diana (2011) Two approaches for estimation of production time: robust regression analysis and neural network. = Two approaches for estimation of production time: robust regression analysis and neural network. In: International Conference on Flexible Automation and Intelligent Manufacturing (21 ; 2011), 26.-29.06.2011., Taichung, Taiwan.
Lisjak, Dragutin and Čala, Ivo and Alić Kostešić, Vesna (2011) New features of knowledge representation in maintenance expert systems. = New features of knowledge representation in maintenance expert systems. Maintworld = Maintenance & Asset Management, 3 (2). pp. 41-44. ISSN 1798-7024. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Liščić, Božidar and Singer, Saša and Beitz, Hartmut (2011) Dependence of heat transfer coefficient at quenching on diameter of cylindrical workpieces. = Dependence of heat transfer coefficient at quenching on diameter of cylindrical workpieces. International Heat Treatment and Surface Engineering, 5 (3). pp. 101-105. ISSN 1749-5148. Vrsta rada: Original scientific paper. . .
Liščić, Božidar and Singer, Saša and Beitz, Hartmut (2011) Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces. = Dependence of the heat transfer coefficient at quenching on diameter of cylindrical workpieces. Journal of ASTM International, 8 (7). ISSN 1546-962X. Vrsta rada: Original scientific paper. . .
Ljubas, Davor and Sabol, Goran (2011) Possibilities of environmental aspects and impacts evaluation according to ISO 14001 standard on the example of an academic institution. = Possibilities of environmental aspects and impacts evaluation according to ISO 14001 standard on the example of an academic institution. The Holistic Approach to Environment, 1 (2). pp. 75-84. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Ljubić, Ivan (2011) Prijedlog dobrog gospodarenja objektima i infrastrukturom. = Preposition for good facility management. Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.
Lončar, Dražen and Ridjan, Iva (2011) Medium Term Development Prospects of Cogeneration District Heating Systems in Transition Country – a Croatian Case. = Medium Term Development Prospects of Cogeneration District Heating Systems in Transition Country – a Croatian Case. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2011, 25-29.09.2011., Dubrovnik, Hrvatska.
Lončarić, Damir (2011) Analiza čvrstoće okvira kontejnerske cisterne. = Strength analysis of storage tank frame. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sorić, Jurica.
Lovrenić-Jugović, Martina and Tonković, Zdenko (2011) Numeričko modeliranje procesa puzanja kortikalnoga koštanoga tkiva. = Numerical modelling cortical bone tissue creep processes. In: Četvrti susret hrvatskog društva za mehaniku, 10.06.2011, Slavonski Brod, Hrvatska.
Lovrenić-Jugović, Martina and Tonković, Zdenko and Skozrit, Ivica (2011) Modelling of nonlinear creep and recovery behaviour of cortical bone. = Modelling of nonlinear creep and recovery behaviour of cortical bone. In: 10th International Conference on Fracture and Damage Mechanics, FDM2011, 19-21.09.2011., Dubrovnik; Croatia.
Ložar, Viktor (2011) Sustav za dinamičko pozicioniranje na bušačem brodu s dizalicom za teške terete. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čorić, Većeslav.
Lukić, Ingrid (2011) Biopolimeri. = Biopolymers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Lulić, Fabijan and Virag, Zdravko (2011) Impact of coronary flow on parameters of a lumped model of the arterial tree. = Impact of coronary flow on parameters of a lumped model of the arterial tree. In: 28th Danubia-Adria-Symposium on Advances in Experimental Mechanics, 28.09.-01.10.2011., Siofok, Mađarska.
Lutrov, Tomislav (2011) Preinaka gradskog autobusa u panoramski autobus. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Majher, Sonja (2011) Uređaj za mjerenje karakteristike pogonskih strojeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Majić, Frane and Petrovčić, Matija and Virag, Zdravko (2011) Analiza aerodinamičkih karakteristika aeroprofila s nakupinom leda. = Aerodynamic characteristics of airfoil with ice accumulation. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011., Slavonski Brod, Hrvatska.
Majić, Frane and Virag, Zdravko (2011) Viscous-inviscid interaction method for steady transonic flow. = Viscous-inviscid interaction method for steady transonic flow. Transactions of FAMENA, 35 (2). pp. 35-48. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 2.
Majić, Marijana and Mulabdić, Alen and Ćurković, Lidija (2011) Analiza energetske bilance pri mjerenju knoopove tvrdoće aluminij oksidne keramike. = An energy - balance analysis of the alumina ceramics knoop hardness testing. In: MATRIB 2011, Vela Luka, Hrvatska.
Majić, Marijana and Ćurković, Lidija and Ćorić, Danko (2011) Load dependence of the apparent Knoop hardness of SiC ceramics in a wide range of loads. = Load dependence of the apparent Knoop hardness of SiC ceramics in a wide range of loads. Materialwissenschaft und Werkstofftechnik, 42 (3). pp. 234-238. ISSN 0933-5137. . .
Maletić, Melanija (2011) Unapređenje procesa poduzeća korištenjem kaizena. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Mandarić, Bojan (2011) Određivanje radnih karakteristika Pitotove cijevi. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Mandić, Vesna and Ćosić, Predrag (2011) Integrirani razvoj proizvoda i procesa u kolaborativnom virtualnom inženjering okruženju. = Integrated product and process development in collaborative virtual engineering environment. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (3). pp. 369-378. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 2.
Mannini, Claudio and Šoda, Ante and Schewe, Guenter (2011) Numerical investigation on the three-dimensional unsteady flow past a 5:1 rectangular cylinder. = Numerical investigation on the three-dimensional unsteady flow past a 5:1 rectangular cylinder. Journal of Wind Engineering and Industrial Aerodynamics, 99 (4). pp. 469-482. ISSN 0167-6105. Vrsta rada: Original scientific paper. Kvartili JCR: Q2 (2011). .
Marelja, Hrvoje (2011) Proračun kondenzatora. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.
Marenić, Eduard and Sorić, Jurica and Tonković, Zdenko (2011) Numerical modeling of atomistic-to-continuum coupling based on bridiging domain method. = Numerical modeling of atomistic-to-continuum coupling based on bridiging domain method. PAMM : Proceedings in applied mathematics and mechanics, 11 (1). pp. 539-540. ISSN 1617-7061. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Marenić, Eduard and Sorić, Jurica and Tonković, Zdenko (2011) Numeričko modeliranje prijelaza s atomističkog modela na razinu mehanike kontinuuma. = Numerical modeling of atomistic-to-continuum coupling. In: Četvrti susret hrvatskog društva za mehaniku, 10.6.2011., Slavonski Brod, Hrvatska.
Marić, Anamarija (2011) Razmatranje načina zaleđivanja aeroprofila. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Marić, Marko (2011) Doprinos plastike zaštiti klime. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Marić, Robert (2011) Oblikovanje robotske stanice za rezanje čeličnih profila. = Design of robotic station for cutting steel sections. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Maričić, Danijel (2011) Usporedba metoda mjerenja srednjeg promjera paralelnih navoja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Marjanović, Dorian and Štorga, Mario (2011) Product development courses in E-learning environment. = Product development courses in E-learning environment. In: 13th International Conference on Engineering and Product Design Education, E and PDE 2011, 08-09.09.2011., London; United Kingdom.
Marjanović, Dorian and Štorga, Mario and Stanković, Tino (2011) Centar za razvoj proizvoda. = Product Development Centre. IRT 3000 - inovacije, razvoj, tehnologije, 16 (3/2011). pp. 17-18. ISSN 1846-5951. Vrsta rada: Editorial. . Točan broj autora: 3.
Markučič, Damir and Mihaljević, Morana and Guliš, Matija (2011) Simulation of ultrasonic pulse propagation through multiple curved boundaries. = Simulation of ultrasonic pulse propagation through multiple curved boundaries. Transactions of FAMENA, 35 (3). pp. 1-12. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Markučič, Damir and Runje, Biserka and Stepanić, Josip (2011) Assessment of uncertainty in modelled ultrasonic thickness measurements. = Assessment of uncertainty in modelled ultrasonic thickness measurements. Materialprufung, 53 (4). pp. 233-237. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Martan, Boško (2011) Parna turbina geotermalne elektrane Babina Greda. = Steam turbine of geothermal power plant Babina Greda. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Martinaga, Marin (2011) Određivanje propadanja tlačne vage. = Determination of pressure balance fall rate. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Martinez, Ivan (2011) Računalna rekonstrukcija rešetkaste konstrukcije autobusa upotrebom mjernog sustava GOM Tritop. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Martinović, Bernard (2011) Prigušivač stražnjeg ovjesa bicikla. = Bicycle rear shock absorber. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kranjčević, Nenad.
Martinović, Katarina (2011) Uređaj za okretanje lokomotiva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Matana, Maroje (2011) Prirubnički stezni element promjera 1005 mm. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Math, Miljenko and Keran, Zdenka and Piljek, Petar (2011) Critical overview of modified hydraulic bulging in determination of flaw stress curve. = Critical overview of modified hydraulic bulging in determination of flaw stress curve. In: International Conference on Innovative Technologies, 01-03. 09. 2011., Bratislava, Slovačka.
Math, Miljenko and Keran, Zdenka and Piljek, Petar (2011) Flow stress curves using modified bulging test. = Flow stress curves using modified bulging test. In: 6th International Working Conference ’’TOTAL QUALITY MANAGEMENT - ADVANCED AND INTELLIGENT APPROACHES’’, 07-11.06.2011., Beograd, Srbija.
Matijašević, Branimir and Guzović, Zvonimir (2011) Tehničko tehnološki aspekt korištenja energije vjetra u Republici Hrvatskoj. = Technical and technological aspect of the wind energy usage in The Republic of Croatia. In: 2. međunarodni kogres "Dani inženjera strojarstva", 23.-26.03.2011., Split, Hrvatska.
Matijašević, Dubravko (2011) Hermiteova interpolacija radijalnim baznim funkcijama u metodi kontrolnih volumena. = Hermitian radial basis function interpolation in finite volume method. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.
Matijević, Božidar and Kumić, Ivan and Alar, Vesna (2011) Modification of the hot work tool steel surface by different thermochemical treatments. = Modification of the hot work tool steel surface by different thermochemical treatments. In: 19th IFHTSE Congress, 17-20.10.2011., Glasgow.
Matijević, Božidar and Kumić, Ivan and Belić, Tomislav (2011) The low temperature aluminising kinetics of hot-work tool steels. = The low temperature aluminising kinetics of hot-work tool steels. In: International Conference on "Heat Treatment and Surface Engineering of Tools and Dies" (3 ; 2011), 23.-25.03.2011., Wels, Austrija.
Matijević, Božidar and Pedišić, Ljiljana (2011) The influence of quenchant composition on the cooling rate. = The influence of quenchant composition on the cooling rate. In: The European Conference of Heat Treatment "Quality in Heat Treatment" (3 ; 2011), 23.-25.03.2011., Wels, Austrija.
Matijević, Božidar and Ćurković, Lidija and Rede, Vera (2011) Characterisation and determination of Ni-P coating sputtering rate. = Characterisation and determination of Ni-P coating sputtering rate. International Journal of Microstructure and Materials Properties, 6 (6). pp. 479-485. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Matijević, Božidar and Ćurković, Lidija and Rede, Vera (2011) Characterization and determination of Ni-P coating sputtering rate. = Characterization and determination of Ni - P coating sputtering rate. International Journal of Microstructure and Materials Properties, 6 (6). pp. 479-485. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2011) Properties of different compositions of oils as quenchants. = Properties of different compositions of oils as quenchants. In: IFHTSE Congress (19 ; 2011), 17.-20.10.2011., Glasgow, Škotska.
Matijević, Magdalena (2011) Analiza svojstava epruveta sa šupljikavim strukturama načinjenih postupkom 3D tiska. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Matković, Hrvoje (2011) Primjena programa za simulaciju lijevanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Maček, Marko (2011) Proizvodnja zaštitnih prsluka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Mažar, Miroslav (2011) Primjena šest Sigma metoda u određivanju tolerancija. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Medić, Srđan (2011) Razvoj sustava za umjeravanje mjernih skala. = Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Medven, Mario (2011) Primjena fotogrametrije pri određivanju abrazijske otpornosti nodularnog lijeva. = Application of photogrametry in abrasion resistance measurements of ductile cast iron. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Meštrović, Krešimir (2011) Ispitivanje simetičnosti opterećenja etalona sile. = Testing the symmetry of the load of the reference force standard. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Midžić, Ida and Marjanović, Dorian (2011) Eco design and creativity issues. = Eco design and creativity issues. In: 4th World Conference on Design Research (IASDR2011), 31.10.-04.11.2011., Delft, Nizozemska.
Mihalic, Ivana and Mance, Ines and Kramer, Ivan and Bauer, Branko (2011) Aluminijske legure za rad na povišenim temperaturama. = Cast aluminium alloys for elevated temperatures applications. In: 11th International Foundrymen Conference ; Foundry Industry – Significance and Future Challenges, 28-29.04.2011., Opatija, Republika Hrvatska.
Mihalic, Ivana and Mance, Ines and Kramer, Ivan and Bauer, Branko (2011) Aluminijske slitine za rad na povišenim temperaturama. = Cast Aluminium Alloys for Elevated Temperatures Applications. Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo, 53 (2). pp. 43-48. ISSN 1330-2132. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Mihalić, Tihomir (2011) Hidrodinamičke pojave u centrifugalno vrtložnoj pumpi. = Hydrodynamic phenomena in centrifugal vortex pump. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Mihalić, Tihomir and Guzović, Zvonimir and Sviderek, Stanislav (2011) Improving centrifugal pump by adding vortex rotor. = Improving centrifugal pump by adding vortex rotor. Journal of energy Technology - JET, 4 (2). pp. 11-20. ISSN 1855-5748. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mihalić, Tomislav (2011) Upravljanje mehaničkim sustavima s kompenzacijom trenja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.
Mihoci, Luka (2011) Analiza mehaničkih gubitaka u motoru s unutarnjim izgaranjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Mikulandrić, Robert and Lončar, Dražen and Schneider, Daniel Rolph and Franković, Valdi (2011) Improvement of Environmental Aspects of Thermal Power Plant Operation by Advanced Control Concepts. = Improvement of Environmental Aspects of Thermal Power Plant Operation by Advanced Control Concepts. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES2011), 25–29.09.2011., Dubrovnik, Hrvatska.
Mikulčić, Hrvoje and Minić, Ivica and Von Berg, Eberhard and Fidaros, Dimitris K. and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven and Stefanović, Gordana (2011) Reducing CO2 emissions in cement industry-the calcination model. = Reducing CO2 emissions in cement industry – the calcination model. In: ECOS 2011 - The 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 04.-07.07.2011., Novi Sad, Srbija.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2011) CFD simulation of calcination process for cement production - model implementation and validation. = CFD simulation of calcination process for cement production - model implementation and validation. In: 9th European Conference on Industrial Furnaces and Boilers, 26.-29.04.2011., Estoril, Portugal.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2011) Numerical Modelling of Calcination Reaction Mechanism. = Numerical Modelling of Calcination Reaction Mechanism. In: 5th European Combustion Meeting, 28.6.-1.7.2011., Cardiff, Wales, UK.
Mikulčić, Hrvoje and Vujanović, Milan and Duić, Neven (2011) Reducing the CO2 emissions in Croatia’s cement industry – the pre-calciner model. = Reducing the CO2 emissions in Croatia’s cement industry – the pre-calciner model. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environmental Systems, 25.-29.09.2011., Dubrovnik, Hrvatska.
Milinović, Andrijana and Grilec, Krešimir and Glavaš, Danko and Marušić, Vlatko (2011) Tribološki pristup problemu oštećivanja cijevi u kotlovima loženim komunalnim otpadom. = Tribological approach to the problem of damaging of pipes in communal waste fired boilers. In: International conference Matrib 2011., Vela Luka, Hrvatska.
Mioč, Josip (2011) Optimizacija parametara pri rezanju plazmom. = Optimization of parameters for plasma cutting. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Mirković, Siniša (2011) Projekt montaže i puštanja u rad hidrauličke kočnice SCHENCK u Laboratoriju za motore i vozila FSB-a. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Mirt, Kristian (2011) Regulacija brzine vrtnje servomotora zasnovana na dualnom regulatoru i referentnom modelu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.
Mićić Hot, Jadranka and Pavić, Zlatko and Pečarić, Josip (2011) Extension of Jensen's inequality for operators without operator convexity. = Extension of Jensen's inequality for operators without operator convexity. Abstract and Applied Analysis, 2011. ISSN 1085-3375. Vrsta rada: Original scientific paper. Kvartili JCR: Q1 (2011). .
Mićić Hot, Jadranka and Pavić, Zlatko and Pečarić, Josip (2011) Jensen type inequalities on quasi - arithmetic operator means. = Jensen type inequalities on quasi - arithmetic operator means. Scientiae Mathematicae Japonicae, 73 (2-3). pp. 183-192. ISSN 1346-0862. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mićić Hot, Jadranka and Pavić, Zlatko and Pečarić, Josip (2011) Jensen's inequality for operators without operator convexity. = Jensen's inequality for operators without operator convexity. Linear Algebra and Its Applications, 434 (5). pp. 1228-1237. ISSN 0024-3795. Vrsta rada: Original scientific paper. Kvartili JCR: Q2 (2011). .
Mićić Hot, Jadranka and Pavić, Zlatko and Pečarić, Josip (2011) Order among power operator means with condition on spectra. = Order among power operator means with condition on spectra. Mathematical Inequalities and Applications, 14 (3). pp. 709-716. ISSN 1331-4343. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .
Mišur, Ivo (2011) Iskoristivost apsorpcije energije aluminijskih pjena. = Efficiency of energy absorption of aliminium foams. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Mrvoš, Dražen (2011) Analiza mikrostrukturne slike računalom. = The image processing of material microstructures. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Mudronja, Vedran (2011) Kako tumačiti statističku definiciju metodologije "šest sigma"? = In: 11. Hrvatska konferencija o kvaliteti i 2. znanstveni skup Hrvatskog društva za kvalitetu, 12-14.05.2011., Vodice, Hrvatska.
Muftić, Osman and Jurčević Lulić, Tanja and Godan, Bruno (2011) Harmonijska raspodjela mase dijelova ljudskog tijela. = Harmonic distribution of the segmental masses of the human body. Sigurnost : časopis za sigurnost u radnoj i životnoj okolini, 53 (1). pp. 1-10. ISSN 0350-6886. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mulabdić, Alen (2011) Analiza utjecaja opterećenja na Knoopovu tvrdoću aluminij oksidne keramike. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Murtezanović, Siniša (2011) Raspoređivanje poslova po strojevima u farmaceutskoj industriji. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Muža, Marko (2011) Ispitivanje zrakoplovnih sendvič materijala prema ASTM C364-99. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Nenadić, Zvonimir (2011) Analiza zamora stupa vjetroagregata. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko and Lesičar, Tomislav.
Nestić, Milena (2011) Kriteriji održivosti u razvoju vatrogasnih vozila. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Nikšić, Ivan (2011) Primjena genetskih algoritama u proizvodnji. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Novak, Tomislav (2011) Korozijska otpornost modificiranih i prevučenih metalnih površina. = Corrosion resistance of the modified and coated metal surfaces. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Novaković, Branko and Kasać, Josip and Kirola, Marijo (2011) Dynamic model of nanorobot motion in multipotential field. = Dynamic model of nanorobot motion in multipotential field. Strojarstvo, 53 (2). pp. 103-111. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2011) Control of nanorobot motion in a multipotential field. = Control of nanorobot motion in a multipotential field. In: 13th International Scientific Conference on Production Engineering, 16-18.06.2011., Biograd, Hrvatska.
Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2011) Some problems and solutions in nanorobot control. = Some problems and solutions in nanorobot control. In: The 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.
Novogradec, Marko (2011) Usporedba sustava homologacije motocikla u SAD-u i u Europi. = Motorcycle approval system in U.S.A. and in Europe. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Novosel, Darko (2011) Usporedba dva načina odvodnje sanitarne otpadne vode. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Slapničar, Vedran.
Novosel, Tomislav (2011) Trigeneracijsko postrojenje u uredskoj zgradi. = Trigeneration plant in office building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Obad, Emil (2011) analize distribucije naftnih derivata. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Oblaković, Miodrag (2011) Izrada varijantnog modela zračnog rashladnog sustava model YMA-AHU. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Omeragić, Adis (2011) Pojedinačno odobravanje vozila proizvedenih za treća tržišta prema Uredbi Europske komisije br. 183/2011. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Opalić, Milan and Galić, Ivica and Vučković, Krešimir (2011) Wall thickness influence on allowable pressure of cast steel globe valve body. = Wall thickness influence on allowable pressure of cast steel globe valve body. In: International Conference of Engineering Against Fracture, 22-24.06.2011., Mikonos, Grčka.
Opalić, Milan and Vučković, Krešimir and Kljajin, Milan (2011) Effect of Web Arrangement on Thin - rim Gear Tooth Contact Stress. = Effect of Web Arrangement on Thin - rim Gear Tooth Contact Stress. In: 15th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2011, 22-24.06.2011., Prag, Češka.
Opalić, Milan and Vučković, Krešimir and Žeželj, Dragan (2011) Bending fatigue crack initiation life prediction in spur gear tooth root. = Bending fatigue crack initiation life prediction in spur gear tooth root. In: 2nd International Conference of Engineering Against Fracture (ICEAF II), 22-24.06.2011., Mikonos, Grčka.
Opalić, Milan and Vučković, Krešimir and Žeželj, Dragan and Risović, Stjepan (2011) Prediction of thin - rim gears bending fatigue crack initiation life. = Prediction of thin - rim gears bending fatigue crack initiation life. In: The 7th International Scientific Conference - Research and Development of Mechanical Elements and Systems - IRMES 2011, 27-28.04.2011, Zlatibor, Srbija.
Opetuk, Tihomir and Česnik, Vedran and Žolo, Ivan and Đukić, Goran (2011) Route Planning for Urban Waste Collection: Problem Considerations on Case. = Route Planning for Urban Waste Collection: Problem Considerations on Case. In: 3rd Scientific Conference Management of Technology Step to Sustainable Production, 8.-10.06.2011., Bol (Brač), Hrvatska.
Orešković, Ivan (2011) Konstruiranje kalupa za tlačni lijev. = Die casting mold design. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Orčić, Branislav and Tevčić, Marina and Ciglar, Damir (2011) The application of FEM in some segments of manufacturing processes. = The application of FEM in some segments of manufacturing processes. In: Međunarodno znanstveno savjetovanje proizvodnog strojarstva (13 ; 2011), 16.-18.06.2011., Biograd, Hrvatska.
Osman, Krešimir and Stamenković, Dragi and Lazarević, Mihailo (2011) Robust product architecture development combining matrix-based approaches and function-based failure propagation method - M-FBFP framework. = Robust product architecture development combining matrix-based approaches and function-based failure propagation method - M-FBFP framework. FME Transactions, 39 (4). pp. 145-156. ISSN 1451-2092. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Osman, Krešimir and Štorga, Mario and Stanković, Tino and Marjanović, Dorian (2011) Behaviour Prediction Framework in System Architecture Development. = Behaviour Prediction Framework in System Architecture Development. Applied Mechanics and Materials, 104 (3). pp. 3-12. ISSN 1662-7482. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Otal, P. and Morgado, I. and Steindl, D. and Medina Martín, N. and Lefkopoulos, A. and Altintas, A. and Grgec Bermanec, Lovorka and Bursic, S. and Setina, J. and Bergoglio, M. and Spohr, I. and Wüthrich, C. and Rantanen, M. and Vámossy, C. and Sabuga, W. and Koçaş, I. (2011) Evaluation of crossfloat measurements with pressure balances – Results of EURAMET project 1125. = Evaluation of crossfloat measurements with pressure balances – Results of EURAMET project 1125. PTB Mitteilungen, 3. pp. 294-297. ISSN 0030-834X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 16.
Pacadi, Jurica (2011) Motorvreteno. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Pajković, Eni (2011) Konstrukcija fleksibilnog stabilizatora skočnog zgloba. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Palajsa, Antun (2011) Zrakoplovni kompasi troosnog ulaznog toka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Palalić, Marija (2011) Prikolica za prijevoz zrakoplovne jedrilice Meteor. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Palovčik, Andreja (2011) Sustav vođenja u prilazu za slijetanje putničkog aviona. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Parunov, Joško and Ćorak, Maro and Pensa, Marina (2011) Wave height statistics for seakeeping assessment of ships in the Adriatic Sea. = Wave height statistics for seakeeping assessment of ships in the Adriatic Sea. Ocean Engineering, 38 (11-12). pp. 1323-1330. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Parunov, Joško and Ćorak, Maro and Senjanović, Ivo (2011) Environmental and operational uncertainties in long-term prediction of slamming loads of containerships. = Environmental and operational uncertainties in long-term prediction of slamming loads of containerships. In: 3rd International Conference on Marine Structures, MARSTRUCT 2011, 28-30.03.2011., Hamburg; Germany.
Pasanec, Josip (2011) Izmjenjivač topline sa spiralnim cijevnim snopom. = Heat exchanger with spiral tube bundle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Paskutini, Bruno (2011) Manipulator za povezivanje transportnih sustava. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Paunović, Marko (2011) Numerički upravljana glodalica. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Pavelić, Marko (2011) Projektiranje postupaka za ispitivanje manometara za krvni tlak. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Pavković, Danijel and Deur, Joško (2011) Modeling and control of electronic throttle trive: a practical approach – from experimental characterization to adaptive control and application. = Modeling and control of electronic throttle trive: a practical approach – from experimental characterization to adaptive control and application. Lambert Academic Publishing, Saarbrücken, Njemačka, -. ISBN 978-3-8443-1628-5
Pavković, Danijel and Deur, Joško and Lisac, Anton (2011) A torque estimator-based control strategy for oil-well drill-string torsional vibrations active damping including an auto-tuning algorithm. = A torque estimator-based control strategy for oil-well drill-string torsional vibrations active damping including an auto-tuning algorithm. Control Engineering Practice, 19 (8). pp. 836-850. ISSN 0967-0661. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2011). Točan broj autora: 3.
Pavković, Danijel and Hoić, Matija and Petrić, Joško and Herold, Zvonko and Deur, Joško (2011) An overview of energy storage systems considering renewable energy applications. = An overview of energy storage systems considering renewable energy applications. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.
Pavković, Dragomir and Pukšec, Tomislav and Duić, Neven (2011) Energy demand modelling for the Croatian education sector. = Energy demand modelling for the Croatian education sector. In: 21 st. INTERNATIONAL SYMPOSIUM ON HEATING, REFRIGERATING AND AIR CONDITIONING, 07-08.04.2011., Zagreb.
Pavković, Neven and Bojčetić, Nenad and Franić, Leonard and Marjanović, Dorian (2011) Case studies to explore indexing issues in product design traceability framework. = Case studies to explore indexing issues in product design traceability framework. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.
Pavković, Neven and Marjanović, Dorian and Kovačević, Antonijo and Fain, Nuša (2011) Industrial partnership in design education - Experiences from EGPR course. = Industrial partnership in design education - Experiences from EGPR course. In: 13th International Conference on Engineering and Product Design Education, E and PDE 2011, 08-09.09.2011., London; United Kingdom.
Pavlović, Berislav (2011) Razvoj etalonskog mjernog sustava za male protoke plina. = Development of standard measurement system for low gas flow rate. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Pavlović, Ivan (2011) Dinamička analiza rastojnika-prigušivača. = Dynamic analysis of spacer-damper. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.
Pavlović, Petar (2011) Šest sigma statistički alati. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Pavlović, Zoran (2011) Povećanje učinkovitosti primjene CNC strojeva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Pašalić, Davor (2011) Rashladne komore za dozrijevanje banana. = Cold stores for banana ripening. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Pedišić, Ljiljana and Matijević, Božidar and Munić, Jasminka (2011) The influence of quenchant composition on cooling rate. = The influence of quenchant composition on cooling rate. Strojarstvo, 53 (1). pp. 53-61. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Pedišić, Ljiljana and Ćurković, Lidija and Ciglar, Damir and Matijašić, Gordana (2011) Characterization of the cooling liquid after the machining of alumina ceramics. = Characterization of the cooling liquid after the machining of alumina ceramics. In: Computer integrated manufacturing and high speed machining, 16-18.06.2011., Biograd, Hrvatska.
Pedišić, Ljiljana and Ćurković, Lidija and Matijašić, Gordana and Sladojević, Milan (2011) Characterization of the cooling liquid after the machining of Si and SiO2. = Characterization of the cooling liquid after the machining of Si and SiO2. Transactions of FAMENA, 35 (1). pp. 75-82. ISSN 1333-1124. Vrsta rada: Original scientific paper. Kvartili JCR: Q4 (2011). .
Pejazić, Josip (2011) Metoda za ispitivanje i podešavanje ventila sigurnosti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Boras, Ivanka.
Penović, Ivan (2011) Dupleks čelici u brodogradnji. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Perhot, Darko (2011) Upravljanje rizicima metodom analitičko hijerarhijskog procesa. = Risk management using analytical hierarchical process method. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Perković, Ivan (2011) Analiza vozila u programskoj aplikaciji AVL Cruise. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Perković, Vladimir (2011) Kratkotrajna pohrana energije hidro-pneumatskim akumulatorima. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.
Petener, Porin (2011) Upravljanje robotom s tri rotacijska stupnja slobode gibanja. = Control of robot with three rotational degrees of freedom. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.
Peternac, Igor (2011) Konstrukcija mehaniziranih naprava za demontažu kugličnih ležaja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Seuček, Ivan.
Petranović, Matija (2011) Automatsko slaganje jezgri distrubutivnih transformatora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Petrovčić, Matija (2011) Utjecaj pojave leda na aerodinamičke karakteristike profila. = Influence of ice on the airfoil aerodynamic characteristic. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Petrovčić, Tomislav (2011) Zaporni ventil. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Petrunić, Hrvoje (2011) Projekt sustava grijanja i pripreme potrošne tople vode za obrazovnu ustanovu. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Pezić, Mladen (2011) Konstruiranje kalupa za injekcijsko prešanje plastomernog otpreska - dio mehanizma pištolja. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Pečur, Matko (2011) Mosni granik s kutno postavljenim vitlom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
Picek, Hrvoje (2011) Usporedba mehaničkih svojstava polistirena. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Pijaca, Nino (2011) Projekt plinske turbine za pogon helikoptera. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijašević, Branimir.
Pilipović, Ana and Raos, Pero and Šercer, Mladen (2011) Eksperimentalno ispitivanje kvalitete polimernih tvorevina proizvedenih LOM postupkom. = Experimental testing of quality of polymer parts produced by laminated object manufacturing - LOM. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2). pp. 253-260. ISSN 1330-3651. Vrsta rada: Preliminary communication. Kvartili JCR: Q4 (2011). .
Pilipović, Ana and Šercer, Mladen and Stojanović, Ivan and Brajlih, Tomaž and Drstvenšek, Igor and Valentan, Bogdan (2011) Laminated object manufacturing vs. Fused deposition modeling : machine comparison. = Laminated object manufacturing vs. Fused deposition modeling : machine comparison. In: DAAAM World Symposium "Intelligent Manufacturing and Automation : Power of Knowledge and Creativity" (22 ; 2011), 23.-26.11.2011., Vienna, Austrija.
Pilipović, Ana and Šercer, Mladen and Valentan, Bogdan (2011) Use of low - cost 3D printers and the influence of parameters on the precision and mechanical properties. = Use of low - cost 3D printers and the influence of parameters on the precision and mechanical properties. In: 13th International scientific conference on production engineering, 16-18.06.2011., Biograd na moru, Hrvatska.
Pilski, Milo (2011) Analiza naprezanja nosive rešetke trkaćeg rally vozila te smanjenje mase rešetke promjenom poprečnog presjeka štapova. = Stress analysis of body structure of an off-road race car and mass reduction of body structure due to change of beam cross section area. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahalec, Ivan.
Pinđak, Mario (2011) Sustav za brzu izradu prototipova selektivnim laserskim srašćivanjem. = Rapid prototyping system by selective laser sintering. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Pirović, Davor (2011) Primjena PLM Siemens softvera uz kriterij minimalnih troškova. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Pirović, Davor and Gudlin, Mihael and Ćosić, Predrag (2011) Implementation of Genetic Algorithm as the Part of Dicrete Simulation in Production Planning. = Implementation of Genetic Algorithm as the Part of Dicrete Simulation in Production Planning. In: 1st Regional Conference - Mechatronics in Practice and Education MECH - CONF 2011, 08-10.12.2011., Subotica.
Piškulić, Franjo (2011) Metode poslovne inteligencije pomoć pri donošenju poslovnih odluka. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Plavotić, Marija (2011) Idejni projekt hidrauličkog stola. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.
Plejić, Lovro (2011) Konstrukcija uređaja za proizvodnju normiranog zvuka - tapkalica. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Plevnik, Vasko (2011) Projekt kogeneracijskog postrojenja na drvni ostatak snage 2,6 MW. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Pongrac, Tomislav (2011) Usporedba kamenog ugljena i lignita kao energenta primjenom LCA (Life Cycle Assessment) metodologije. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.
Poslon, Kristijan (2011) Projekt pomičnih vrata ograde. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Prahin, Karlo (2011) Ispitivanje stupnja automatiziranosti proizvodnih procesa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Prebeg, Pero (2011) Višekriterijsko projektiranje složenih tankostjenih konstrukcija. = Multi-criteria design of complex thin-walled structures. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žanić, Vedran.
Previšić, Pero and Grilec, Krešimir and Jakovljević, Suzana (2011) Iskoristivost apsorpcije energije aluminijskih pjena. = Efficiency of energy absorption of aluminium foams. In: International conference on materials, tribology and recycling, Vela Luka, Hrvatska.
Protić, Antonio (2011) Unapređenje poslovnih procesa poduzeća primjenom e-poslovanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Pugar, Denis (2011) Stroj za previjanje rubova limene ambalaže. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Pukšec, Tomislav and Duić, Neven (2011) Energetska politika i dugoročna potrošnja energije u sektoru kućanstva u Hrvatskoj. = Energy policy and long term energy demand in Croatian households sector. In: 20. forum Hrvatskog energetskog društva "Treći paket i ostale direktive iz energetike", 18.11.2011., Zagreb, Hrvatska.
Pukšec, Tomislav and Duić, Neven (2011) Geographic distribution and economic potential of biogas from Croatian farming sector. = Geographic distribution and economic potential of biogas from Croatian farming sector. Chemical Engineering Transactions, 25. pp. 899-904. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Pukšec, Tomislav and Mathiesen, Brian Vad and Duić, Neven (2011) Potentials for energy savings and long term energy demands for Croatian households sector. = Potentials for energy savings and long term energy demands for Croatian households sector. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011., Dubrovnik, Hrvatska.
Pukšec, Tomislav and Vad Mathiesen, Brian and Duić, Neven (2011) Long term energy demand projections for croatian transport sector. = Long term energy demand projections for croatian transport sector. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Puljko, Josip (2011) Konstruiranje kalupa za posredno prešanje poliuretanske potplate. = Mold design for transfer molding of polyurethane soles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Pustaić, Dragan and Cajner, Franjo (2011) Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. = Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. In: 6th International Conference "Materials Structure and Micromechanics of Fracture, MSMF-6", 28-30.06.2010., Brno; Czech Republic.
Pustaić, Maja and Wolf, Hinko and Pustaić, Dragan (2011) Analiza unutarnjih sila i pomaka u kućištu statora hidrogeneratora od okretnog elektromagnetskog momenta. = Analysis of internal forces and displacements in the stator´s frame of hydrogenerator from rotating electromagnetic moment. In: Četvrti susret Hrvatskog društva za mehaniku, 10.06.2011, Slavonski Brod, Hrvatska.
Radić, Marko (2011) Modeliranje i regulacija mehaničkog ovjesa autobusa. = Modeling and control of mechanical bus suspension. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.
Radovanović, Marko (2011) Analiza havarije MSC Napoli. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.
Radoš, Marija (2011) Primjena dinamičkih sustava skladištenja u malim i srednjim poduzećima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Rajčić, Ante (2011) Vjetroturbina s vertikalnom osi vrtnje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Rakovac, Dario (2011) Zakonski okvir ekološkog pristupa proizvodnji. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Ranić, Vladimir (2011) Prikolica za prijevoz teških tereta u unutarnjem transportu. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Ranogajec, Andrija (2011) Predstavljanje znanja pomoću ontologija. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Raos, Marko (2011) Analiza poluproizvoda od polietilena visoke gustoće s dodatkom malog udjela recikliranih staklenih vlakana. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.
Raos, Pero and Tonković, Zlatko and Šercer, Mladen (2011) Analysis and Prediction of Remaining Life Time of Damaged Polyethylene Gas Pipes. = Analysis and Prediction of Remaining Life Time of Damaged Polyethylene Gas Pipes. KGK. Kautschuk, Gummi, Kunststoffe, 64 (6). pp. 33-39. ISSN 0948-3276. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Raos, Pero and Tonković, Zlatko and Šercer, Mladen (2011) Investigation on electrofusion weld properties of polyethylene gas pipes. = Investigation on electrofusion weld properties of polyethylene gas pipes. In: International Conference on Innovative Technologies IN-TECH 2011, 01-03.09.2011, Bratislava, Slovačka.
Razumić, Blaž (2011) Konstruiranje traktorskog viličara. = Design of tractor mounted forklift. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Remenar, Mario (2011) Six Sigma metrika. = Six Sigma metrics. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Režek, Matija (2011) Obrada rezultata mjerenja međulaboratorijske usporedbe etalona hrapavosti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahović, Sanjin.
Rihtarić, Darijo (2011) Mjerenje protoka i razine kapljevina u zrakoplovstvu. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Rodin, Marko (2011) Konstrukcijska razrada tricikla za skupljanje otpada s električnim pogonom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Rodić, Alan and Švaić, Srećko and Dović, Damir (2011) Algoritam za određivanje energijskih zahtjeva i učinkovitosti termotehničkih sustava u zgradama. = Algorithm for determination of the energy requirements and efficiency of thermotechnical systems in buildings. In: Interklima '11, 21 Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 10. Konferencija o termografiji, 07.-08.04.2011., Zagreb, Hrvatska.
Rohde, Danijel (2011) Upravljanje znanjem pri konstrukcijskom oblikovanju. = Embodiment design rationale. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.
Rožić, Igor (2011) Projektiranje fleksibilnih obradnih sustava. = Design of flexible manufacturing systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Rujnić-Sokele, Maja and Šercer, Mladen and Pilipović, Ana (2011) Plastics in the household waste. = Plastics in the household waste. In: 15th International Research/Expert Conference "Trends in the development of machinery and associated technology" TMT 2011, 12.-18.09.2011., Prag, Češka Republika.
Rukavina, Marko (2011) Puzanje materijala PE100. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Runje, Biserka and Alar, Vesna and Grdenić, Ivan (2011) Analiza rezultata mjerenja debljine premaza sukladno normi ISO 5725. = Analysis of the coating thickness measurement results in accordance to the ISO 5725 norm. In: International Conference on Materials, Tribology, Recycling, 28.06.-01.07.2011., Vela Luka, Korčula, Hrvatska.
Runje, Biserka and Mažar, Miroslav and Barišić, Gorana (2011) Statistical tolerancing using Monte Carlo simulation. = Statistical tolerancing using Monte Carlo simulation. In: 13th International Scientific Conference on Production Engineering CIM 2011, 16-18.06.2011., Biograd, Hrvatska.
Runje, Biserka and Medić, Srđan (2011) Measurement uncertainty in process of line scales calibrating. = Measurement uncertainty in process of line scales calibrating. In: 22nd DAAAM World Symposium 2011, 23.26.11.2011., Beč, Austrija.
Runje, Biserka and Rakijašić, Sanja and Alar, Vesna and Baršić, Gorana (2011) Estimation of process capability with regards to the application of fire-resistance coating. = Estimation of process capability with regards to the application of fire-resistance coating. In: The Sixth International Working Conference Total Quality Management - Advanced and Intelligent Approaches, 06-10.06.2011., Beograd, Srbija.
Sabo, Damir (2011) Model vozila pogonjen pomakom glavine. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kranjčević, Nenad.
Sakoman, Iva (2011) Neutralizacija kondenzata plinskih kondenzacijskih kotlova. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.
Salopek, Sara (2011) Utjecaj polivinil alkohola na reološke karakteristike koloidnih Al2O3 suspenzija. = Effect of polyvinyl alcohol on rheology characteristics of colloidal alumina suspensions. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Salopek, Sara and Ćurković, Lidija and Šegota, Suzana (2011) Analiza sol - gel TiO2 prevlaka na čeličnoj podlozi mikroskopijom atomskih sila. = Atomic force microscopy analysis of sol - gel TiO2 coatings deposited on steel substrate. In: MATRIB 2011, Vela Luka, Hrvatska.
Salopek, Vjekoslav (2011) Dinamička izdržljivost brodograđevinskog čelika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Samac, Lidija (2011) Upravljanje letom zrakoplova pomoću sustava postavljenog na pilotsku kacigu. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Sanopoulos, Dimitris and Ćosić, Boris and Mohsen, S. Mousa and Krajačić, Goran and Duić, Neven (2011) Renewable Energy Solutions for the Regions: Integrated Approach to Energy and Water Systems. = Renewable Energy Solutions for the Regions: Integrated Approach to Energy and Water Systems. In: 12th International Conference on Environmental Science and Technology CEST2011, 08-10.09.2011., Rodos, Grčka.
Sarić, Ivana and Essert, Mario (2011) Uključivanje hrvatskog Web sadržaja u DBpediju. = Inclusion of the Croatian Web content into DBpedia. In: 14. seminar Arhivi, knjižnice, muzeji: mogućnosti suradnje u okruženju globalne informacijske infrastructure, 17-19.11. 2010., Poreč, Hrvatska.
Sarić, Ivana and Magdić, Antonio and Essert, Mario (2011) Sheme metapodataka značajne za knjižničarstvo s primjerom implementacije OpenURL standarda. = Metadata schemes significant for librarianship with the implementation of the OpenURL standard. Vjesnik Bibliotekara Hrvatske, 54 (1-2). pp. 134-157. ISSN 0507-1925. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Sarić, Ivana and Magdić, Antonio and Essert, Mario (2011) Zotero - program otvorenog koda za upravljanje bibliografskim bilješkama. = Zotero - Open source software for managing the bibliographic references. Vjesnik Bibliotekara Hrvatske, 54 (1-2). pp. 158-171. ISSN 0507-1925. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Sarić, Valentina (2011) Prikaz skladišnog sustava i procesa farmaceutske kompanije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Savić, Loreta (2011) Utjecaj opterećenja na tvrdoću dupleks čelika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Schneider, Daniel Rolph and Bogdan, Željko (2011) Analysis of a sustainable system for energy recovery from municipal waste in Croatia. = Analysis of a sustainable system for energy recovery from municipal waste in Croatia. Management of Environmental Quality: An International Journal, 22 (1). pp. 105-120. ISSN 1477-7835. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Schneider, Daniel Rolph and Kirac, Mislav and Hublin, Andrea (2011) Cost-Effectiveness of Measures for GHG Emission Reduction and Energy Recovery in Waste Management in Croatia. = Cost-Effectiveness of Measures for GHG Emission Reduction and Energy Recovery in Waste Management in Croatia. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES2011), 25–29.09.2011., Dubrovnik, Hrvatska.
Schneider, Daniel Rolph and Kirac, Mislav and Hublin, Andrea (2011) Potential of municipal solid waste for reduction of GHG emissions and energy production in Croatia. = Potential of municipal solid waste for reduction of GHG emissions and energy production in Croatia. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Sedmak, Daniel (2011) Teorijska visina neravnina na obrađenoj površini kod postupaka obrade odvajanjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škorić, Stephan.
Segurado, Raquel and Krajačić, Goran and Duić, Neven and Alves, Luis Manuel (2011) Increasing the penetration of renewable energy resources in S. Vicente, Cape Verde. = Increasing the penetration of renewable energy resources in S. Vicente, Cape Verde. Applied Energy, 88 (2). pp. 466-472. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 4.
Senegović, Hrvoje (2011) Analiza uranjenog opremanja nadgrađa broda za prijevoz automobila i putnika. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubenkov, Boris.
Senjanović, Ivo and Hadžić, Neven and Tomić, Marko (2011) Investigation of restoring stiffness in the hydroelastic analysis of slender marine structures. = Investigation of restoring stiffness in the hydroelastic analysis of slender marine structures. Journal of Offshore Mechanics and Arctic Engineering, 133 (3). ISSN 0892-7219. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 3.
Senjanović, Ivo and Hadžić, Neven and Tomić, Marko (2011) On the linear stiffness of tension leg platforms. = On the linear stiffness of tension leg platforms. In: International Maritime Association of the Mediterranean, 13-16.09.2011., Genova, Italija.
Senjanović, Ivo and Hadžić, Neven and Tomić, Marko and Malenica, Šime (2011) On consistency of actual restoring stiffness formulations in hydroelastic analysis of marine structures. = On consistency of actual restoring stiffness formulations in hydroelastic analysis of marine structures. In: 26th International Workshop on Water Waves and Floating Bodies, 17-20.04.2011., Atena, Grcka.
Senjanović, Ivo and Tomić, Marko and Vladimir, Nikola (2011) Efektivna krutost konstrukcije strojarnice velikih kontejnerskih brodova. = Effective stiffness of the engine room structure in large container ships. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 62 (1). pp. 15-27. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Senjanović, Ivo and Vladimir, Nikola and Hadžić, Neven and Tomić, Marko (2011) Beam structural modelling in hydroelastic analysis of ultra large container ships. = Beam structural modelling in hydroelastic analysis of ultra large container ships. In: Recent Advances in Vibration Analysis. InTech, Rijeka, pp. 193-222. ISBN 978-953-307-696-6
Senjanović, Ivo and Vladimir, Nikola and Malenica, Šime and Tomić, Marko (2011) Improvements of beam structural modelling in hydroelasticity of Ultra Large Container Ships. = Improvements of beam structural modelling in hydroelasticity of Ultra Large Container Ships. In: ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2011, 19 do 24. 06. 2011., Rotterdam; Netherlands.
Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko (2011) Investigation of torsion, warping and distortion of large container ships. = Investigation of torsion, warping and distortion of large container ships. Ocean Systems Engineering, 1 (1). pp. 73-93. ISSN 2093-6702. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko and Malenica, Šime (2011) A sophisticated beam model for hydroelastic analysis of Ultra Large Container Ships. = A sophisticated beam model for hydroelastic analysis of Ultra Large Container Ships. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.
Sertić, Tomislav (2011) Sustav Pitot - statički na zrakoplovu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Simić Vakanović, Emilija (2011) Inovativne izvedbe automatiziranih skladišnih sustava. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Singer, Sanja and Novaković, Vedran (2011) A GPU-based hyperbolic SVD algorithm. = A GPU-based hyperbolic SVD algorithm. BIT Numerical Mathematics, 51 (4). pp. 1009-1030. ISSN 0006-3835. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). .
Sivonjić, Ljiljana (2011) Određivanje koeficijenta intezivnosti naprezanja eksperimentalnim mjerenjem polja pomaka i deformacija oko vrška pukotine pomoću digitalne korelacije slike (DIC). = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Sjerić, Momir and Kozarac, Darko and Šagi, Goran (2011) Development of a Stratified Fractal Combustion Model. = Development of a Stratified Fractal Combustion Model. In: XXIII JUMV International Automotive Conference "Science and motor vehicles 2011", 19 - 21. 04. 2011., Beograd, Srbija.
Skender, Boris (2011) Tehničko rješenje trigeneracijskog sustava. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Skendrović, Nikola (2011) Postupnik za proračun toplinskih gubitaka u sunčanom sustavu grijanja i pripreme tople vode s toplovodnim kotlom na biomasu. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Skendrović, Nikola and Dović, Damir (2011) Method for calculation of losses in a solar space heating and domestic hot water system with biomass boiler. = Method for calculation of losses in a solar space heating and domestic hot water system with biomass boiler. In: Interklima '11, 21 Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 10. Konferencija o termografiji,, 07.-08.04.2011., Zagreb, Hrvatska.
Skorupski, Mario (2011) Primjena aluminijske pjene za izradu ploča sustava grijanja i hlađenja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Skozrit, Ivica (2011) Numeričko modeliranje pukotina u metalnim i polimernim materijalima. = Numerical modelling of cracks in metal and polymer materials. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Skozrit, Ivica and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2011) Eksperimentalno i numeričko modeliranje zareznog djelovanja u polietilenu. = Experimental and Numerical Modelling of Notches in Polyethylene. In: Četvrti susret hrvatskog društva za mehaniku, 10.06.2011, Slavonski Brod, Hrvatska.
Slavina, Tomislav (2011) Biokompatibilnost materijala. = Materials biocompatibility. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Smetko, Viktor (2011) Uređaj za upravljanje koračnim motorima primjenom PLC-a. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zorc, Davor.
Smojver, Ivica and Ivančević, Darko (2011) Bird strike damage analysis in aircraft structures using Abaqus/Explicit and coupled Eulerian Lagrangian approach. = Bird strike damage analysis in aircraft structures using Abaqus/Explicit and coupled Eulerian Lagrangian approach. Composites Science and Technology, 71 (4). pp. 489-498. ISSN 0266-3538. Vrsta rada: Original scientific paper. Kvartili JCR: Q1 (2011). .
Smoljan, Darko (2011) Razvoj matematičkog modela za ocjenu toplinske ugodnosti u spojenom mlazu. = Development of the mathematical model for evaluation of the thermal comfort in the merged jet. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Sokač, Marko (2011) Upravljanje automatiziranim sustavom skladištenja. = Control of an automated warehouse system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Soldo, Vladimir and Ruševljan, Miroslav and Grozdek, Marino and Ćurko, Tonko (2011) Impact of the Ground-Source Heat Pump Running Time Duration on the System Efficiency. = Impact of the Ground-Source Heat Pump Running Time Duration on the System Efficiency. In: The 23rd IIR International Congress of Refrigeration, 21-26.08.2011., Prag, Češka Republika.
Soldo, Vladimir and Ruševljan, Miroslav and Lepoša, Leon and Grozdek, Marino and Ćurko, Tonko (2011) Prvo terensko mjerenje toplinskih svojstava tla u Hrvatskoj u svrhu projektiranja toplinskog sustava s dizalicom topline. = First In-Situ Measurements of the Ground Thermo-Physical Properties in Croatia due to Design Requirements of the Thermoenergetic System with Heat Pump Application. In: Klima forum 2011. 3. forum o hlađenju, klimatizaciji i ventilaciji, 13-14.10.2011., Zadar, Hrvatska.
Soldo, Vladimir and Ruševljan, Miroslav and Ćurko, Tonko (2011) Proračun dizalice topline tlo-voda prema normi HRN EN 15316-4-2. = Method for calculation of ground source heat pump according to standard HRN EN 15316-4-2. In: 21. međunarodni simpozij o grijanju, hlađenju i klimatizaciji 10. konferencija o termografiji, 7.-8.04.2011., Zagreb, Hrvatska.
Soldo, Vladimir and Ruševljan, Miroslav and Ćurko, Tonko and Lepoša, Leon (2011) Razvoj i primjena dizalica topline povezanih s tlom. = Development and application of the ground source heat pumps. In: 2. međunarodni kongres dani inženjera strojarstva, 23-26.3.2011., Split, Hrvatska.
Sočev, Ana and Boras, Ivanka (2011) Analiza kvalitete izolacije i kontrola ovojnice zgrade primjenom infracrvene termografije. = Analysis of the quality of insulation and envelope control using infrared thermography. In: 21. međunarodni simpozij o grijanju, hlađenju i klimatizaciji 10. konferencija o termografiji, 7.-8. 04. 2011., Zagreb, Hrvatska.
Spajić, Željko (2011) Izrada provlakača za proizvodnju rotora generatora. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Srbić, Tomislav (2011) Utjecaj parametara pustupka selektivnog laserskog srašćivanja na kvalitetu prototipa. = Influence of the parameters of selective laser sintering process on the prototype quality. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Stanec, Marko (2011) Referentni uzorci za ispitivanje penetrantima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Stanković, Tino (2011) Gramatička evolucija tehničkih procesa. = Grammatical evolution of technical precesses. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.
Stanković, Tino and Shea, Kristina and Štorga, Mario and Marjanović, Dorian (2011) An approach for the automated synthesis of technical processes. = An approach for the automated synthesis of technical processes. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.
Staroveški, Tomislav and Brezak, Danko and Udiljak, Toma and Majetić, Dubravko (2011) Experimental machine tool for process monitoring and control systems research. = Experimental machine tool for process monitoring and control systems research. In: The 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.
Staroveški, Tomislav and Brezak, Danko and Udiljak, Toma and Majetić, Dubravko and Goja, Željko and Ciglar, Damir (2011) Three-axis milling machine with the enhanced machine controller. = Three-axis milling machine with the enhanced machine controller. In: CIM 2011- Computer Integrated Manufacturing and High Speed Machining, 16-18.06.2011., Biograd, Hrvatska.
Starčević, Dejan (2011) Električni pogon kotača pogonjenog momentom generiranim ekscentrom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.
Stegić, Milenko and Bjelajac, Bojan (2011) Samouzbudne vibracije čelično-staklenog pročelja zgrade. = Self-excited vibrations of a steel-glass building facade. In: Kongres metrologa 2011, 17-19.10.2011., Kladanj, Srbija.
Stevanović, Milan and Marjanović, Dorian (2011) The continous "Fuzzy Front End" as a part of the innovation process. = The continous "Fuzzy Front End" as a part of the innovation process. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.
Stevanović, Stojan (2011) Prikaz vremena robotom Mitsubishi RM501. = Time display with the robot Mitsubishi RM501. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2011) A Bayesian approach to robot group control. = A Bayesian approach to robot group control. Computer Technology and Application, 2 (9). pp. 716-723. ISSN 1934-7332. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2011) Probabilistic approach to robot group control. = Probabilistic approach to robot group control. In: International Conference on Advanced Design and Manufacturing Engineering, ADME 2011, 16-18.09.2011., Guangzhou, China.
Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2011) A robot group control based on Bayesian reasoning. = A robot group control based on Bayesian reasoning. In: World Congress on Engineering 2011, WCE 2011, 06-08.07.2011., London, United Kingdom.
Stojanović, Ivan (2011) Utjecaj tehnoloških parametara na zaštitna svojstva vodorazrjedivih premaza. = Influence of technological parameters on corrosion protection properties of waterborne coatings. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Stojanović, Miroslav (2011) Ispitivanje zrakoplovnih sendvič materijala prema ASTM C393-00. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Strsoglavec, Damjan (2011) Utjecaj materijala obradka i režima obrade na sile rezanja kod tokarenja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škorić, Stephan.
Strsoglavec, Filip (2011) Projektiranje i sklapanje plinske mjerno-redukcijske stanice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Strsoglavec, Filip and Kunica, Zoran (2011) Unapređenje projektiranja i sklapanja plinske mjerno-redukcijske stanice. = Improvement of planning and assembly of gas metering and reducing station. In: PLIN2011: 9. skup o prirodnom plinu, toplini i vodi ; 2. međunarodni skup o prirodnom plinu, toplini i vodi, 28-30.09.2011., Osijek, Hrvatska.
Stulić, Ivan (2011) Analiza količina i vrsta otpada u kućnom smeću. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Stupnišek, Mladen and Matijević, Božidar (2011) Heat treatment of tools in a noble gas atmosphere. = Heat treatment of tools in a noble gas atmosphere. In: Vacuum Heat Treatment and Heat Treatment of Tools, 22.-23.11.2011, Jihlava, Republika Češka.
Sviderek, Stanislav (2011) Nestacionarne strujne pojave na ulazu u rotor centrifugalnog ventilatora. = Unsteady flow phenomena at the entrance of the centrifugal fan impeller. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijašević, Branimir.
Sviličić, Tamara (2011) Sljedivost inženjerskih informacija i dokumentacije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Svilokos, Luka (2011) Konstruiranje kalupa za kokilno lijevanje aluminijskih legura. = Permanent mold design for casting of aluminium alloys. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Taboršak, Dragutin and Jurum-Kipke, Jasna and Sumpor, Davor (2011) Ergonomska prosudba udjela ljudskog faktora na unutarnjim plovnim putovima. = Ergonomic Assessment of Share of Human Factor on Inland Waterways. In: 6th International Scientific Conference on Ports and Waterways POWA 2011 "Transport market: Intermodality & Liberalisation", 12.10.2011., Zagreb, Hrvatska.
Taboršak, Dragutin and Toš, Zdravko and Sumpor, Davor (2011) Utjecaj promjene udjela ljudskog faktora na sigurnost i pouzdanost odvijanja prometa. = Influence of Change of Human Factor Share on Traffic Flow Safety and Reliability. In: Proceedings of the 6th International Scientific Conference on Ports and Waterways POWA 2011 "Transport market: Intermodality & Liberalisation", 12.10.2011., Zagreb, Hrvatska.
Tanackov, Ilija J. and Stojić, Gordan S. and Tepić, Jovan and Kostelac, Milan and Sinani, F and Sremac, Siniša R. (2011) Golden ratio (sectiona aurea) in Markovian ants AI hybrid. = Golden ratio (sectiona aurea) in Markovian ants AI hybrid. In: 2nd International Conference on Adaptive and Intelligent Systems, ICAIS 2011, 06-08.09.2011., Klagenfurt; Austria.
Tanackov, Ilija J. and Tepić, Jovan and Kostelac, Milan (2011) Zlatni rez u vjerojatnosti i umjetnoj inteligenciji. = The golden ratio in probablistic and artificial intelligence. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (4). pp. 641-647. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Tarandek, Željko (2011) Utjecaj aluminijskih dijelova na pojavu vodika u mjernom transformatoru. = The influence of aluminum parts to the emergence of hydrogen in instrument transformer. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Tarnovski, Boris (2011) DSM razvojnog projekta električnog sportskog automobila. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Teixeira, Ângelo Palos and Parunov, Joško and Guedes Soares, Carlos (2011) Assessment of ship structural reliability. = Assessment of ship structural reliability. In: 1st International Conference of Maritime Technology and Engineering, MARTECH 2011, 10-12.05.2011., Lisbon; Portugal.
Tepić, Jovan and Kostelac, Milan and Stojić, Gordan S. and Tanackov, Ilija J. and Sremac, Siniša R. (2011) Applying methods to reduce rail wear in the railway systems for environmental protection. = Applying methods to reduce rail wear in the railway systems for environmental protection. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Terze, Zdravko and Zlatar, Dario and Mueller, Andreas (2011) Lie Group Integration Method for Constrained Multibody Systems. = Lie Group Integration Method for Constrained Multibody Systems. In: Multibody Dynamics 2011, An ECCOMAS Thematic Conference, 04-07.07.2011., Brisel, Belgija.
Tešanović, Vlatko (2011) Parna turbina za kogeneracijsko postrojenje. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Tkalec, Andrija (2011) Analiza trošenja kliznog tribo para zub-zubna udlaga. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Todić, Rajko and Udiljak, Toma and Goja, Željko (2011) Design of a deep - hole micro - machining system. = Design of a deep - hole micro - machining system. In: CIM 2011- Computer Integrated Manufacturing and High Speed Machining, 16-18.06.2011., Biograd, Hrvatska.
Tomašić, Danijel (2011) Primjena kompozitnih tvorevina u zrakoplovnoj industriji. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Tomašić, Tomislav (2011) Procjena kuta bočnog klizanja temeljena na modelu dinamike vozila i Kalmanovom filtru. = Sideslip angle estimation based on vehicle dynamics model and Kalman filter. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.
Tomić, Denis and Muftić, Osman and Biočić, Berislav (2011) A novel scheduling approach of e-learning content on cloud computing infrastructure. = A novel scheduling approach of e-learning content on cloud computing infrastructure. In: 34th International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2011, 23-27.05.2011., Opatija; Croatia.
Tomić, Mario (2011) Analiza demontaže pri remontu lokomotiva. = Analysis of disassembly during overhaul of locomotives. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Tomić, Rudolf and Ilinčić, Petar and Šagi, Goran (2011) Measuring and reconstrution techniques in vehicle modification and adaptation tasks. = Measuring and reconstrution techniques in vehicle modification and adaptation tasks. In: 13th EAEC European Automotive Congress, The Automobile in the Second Decade: Sharing all Energy Solutions, 13-16.06.2011., Valencia, Španjolska.
Tomić, Rudolf and Lulić, Zoran and Ilinčić, Petar (2011) Optical Measuring Techniques in Reconstruction and Modification of Vehicles. = Optical Measuring Techniques in Reconstruction and Modification of Vehicles. In: XXIII JUMV International Automotive Conference "Science and motor vehicles 2011", 19 - 21. 04. 2011., Beograd, Srbija.
Tomić, Teodor and Kasać, Josip and Milić, Vladimir (2011) Rigid body attitude control with complete rejection of unknown external disturbances. = Rigid body attitude control with complete rejection of unknown external disturbances. In: The 22nd DAAAM International World Symposium, 23-26.11.2011., Beč, Austrija.
Tonković, Zdenko and Skozrit, Ivica and Lesičar, Tomislav (2011) Procjena integriteta opreme pod tlakom. = Pressure Vessels Integrity Assessment. In: 8. hrvatski seminar o tlačnoj opremi, 19.05.2011, Zagreb, Hrvatska.
Tonković, Zdenko and Skozrit, Ivica and Marenić, Eduard and Lesičar, Tomislav (2011) Procjena cjelovitosti zavarenih spojeva u posudi pod tlakom. = Structural Integrity Assessment of Welded Joints in Pressure Vessel. Zavarivanje, 54 (5/6). pp. 125-133. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Tošić, Marina (2011) Prijedlog unapređenja upravljanja infrastrukturnim objektima (Facility Managemant). = Proposal of facility management upgrading. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.
Trbušić, Helena and Dubreta, Nikša (2011) Engineering Education and Social Responsibility: A Qualitative Study of Non-technical Electiveness. = Engineering Education and Social Responsibility: A Qualitative Study of Non-technical Electiveness. In: Management of Technology - Step to Sustainable Production, 8.-10.06.2011., Bol, Brač, Hrvatska.
Tumara, Goran (2011) Zaštita pocinčanih čeličnih konstrukcija vodorazrijedivim premazima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Turković, Tin and Bogdan, Željko and Jurković, Miljenko (2011) Heating System in the Ancient World: the Example of the Southwestern Balneum in Diocletian's Palace in Split. = Heating System in the Ancient World: the Example of the Southwestern Balneum in Diocletian's Palace in Split. In: 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 11-13. 07. 2011., Pointe Aux Piments, Mauricijus.
Tutek, Mario (2011) Osnivanje konstrukcije dvodijelnog spremnika za prijevoz ukapljenog plina. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.
Urukalo, Denis (2011) Modularni sustav za zbrinjavanje kućanskog otpada. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Van den Bosch, P.P.J. and Jokić, Andrej and Frunt, J. and Kling, W.L. and Nobel, F. and Boonekamp, P. and De Boer, W. and Hermans, R.M. (2011) Price-based control of ancillary services for power balancing. = Price-based control of ancillary services for power balancing. European Transactions on Electrical Power, 21 (6). pp. 1889-1901. ISSN 1430-144X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 8.
Vekić, Vedrana (2011) Konstrukcija bespilotne letjelice sa sustavom vertikalnog upravljanja. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Veliki, Tomislav (2011) Razvoj primarnog etalona temperature s novom metodom prenošenja sljedivosti. = Development of the primary temperature standard with new method for dissemination of traceability. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Verberk, J. and Hermans, R.M. and Bosch, P.P.J. van den and Jokić, Andrej and Frunt, J. (2011) Systematic design of market-based balancing arrangements for deregulated power systems: An asynchronous solution. = Systematic design of market-based balancing arrangements for deregulated power systems: An asynchronous solution. In: 2011 IEEE PES Trondheim PowerTech: The Power of Technology for a Sustainable Society, POWERTECH 2011, 19.-23.07.2011., Trondheim, Norveška.
Veršić, Ivan (2011) Prikolica za prijevoz jedrilice Meteor. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Veža, Ivica and Gjeldum, Nikola and Mladineo, Marko and Štefanić, Nedeljko (2011) New product introduction by using Hoshin Kanri. = New product introduction by using Hoshin Kanri. In: 21st International Conference on Production Research: Innovation in Product and Production, ICPR 2011, 31.07.-04.08.2011., Stuttgart; Germany.
Vidić, Zlatko (2011) Metode cjelovitog upravljanja objektima. = Methods of facilities overall management. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.
Vidović, Ivan (2011) Utjecaj radnog medija izopentana na termodinamičku iskoristivost generatora pare. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Vinković, Miroslav (2011) Analiza zaliha gotove robe u poduzeću. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Virag, Ana and Jokić, Andrej and Hermans, R.M. and Bosch, P.P.J. van den (2011) Combined bidding at power and ancillary service markets. = Combined bidding at power and ancillary service markets. In: International Conference on the European Energy Market 2011, 25-27.05.2011., Zagreb, Hrvatska.
Virag, Lana (2011) Analiza zamora lopatice vjetroagregata. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Virag, Zdravko and Živić, Marija and Krizmanić, Severino (2011) Cooling of a sphere by natural convection - The applicability of the lumped capacitance method. = Cooling of a sphere by natural convection - The applicability of the lumped capacitance method. International Journal of Heat and Mass Transfer, 54 (11-12). pp. 2303-2309. ISSN 0017-9310. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Vitko, Željko (2011) Usporedba i računalna simulacija kinematike i kinetike dva mehanizma malja mehaničkih preša. = Comparison and computer simulation of the kinematic and kinetic mechanism of two different mechanical presses. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Math, Miljenko.
Viček, Marko (2011) Prijedlog unapređenja djelatnosti strojarskog održavanja čeličane. = Proposal of mechanical maintenance engineering improvement in steel-mill. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.
Višnić, Srđan (2011) Toplo oblikovanje plastomernog otpreska. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Vladimir, Nikola (2011) Hidroelastičnost i dinamička izdržljivost velikih kontejnerskih brodova. = Hydroelasticity and fatigue strength of large container ships. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Senjanović, Ivo.
Vlah, Ivan (2011) Diskovna kočnica putničkog vagona. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Vlašić, Leon (2011) Utjecaj aditiva u ulju za gašenje na intenzitet ohlađivanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Vozdecki, Tomislav (2011) Upravljanje alatnicom u suvremenoj proizvodnji opruga. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.
Vrbanac, Maja (2011) Prikaz i analiza logističkog sustava poduzeća. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Vugec, Hrvoje (2011) Sony,oblikovanje proizvoda,jednostavno rasklapanje,analiza konstrukcije, DAC metoda. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Vujeva, Tomislav (2011) Matematički model akumulacije reverzibilne hidroelektrane. = Mathematical model of acumulation of reversible hydro power plant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Vukić, Dario (2011) Uvođenje računalom podržanog gospodarenja objektima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Vuković, Danijel and Matijašević, Dubravko and Vrdoljak, Milan (2011) Analysis of supersonic flow in Oswatitsch inlet configuration. = Analysis of supersonic flow in Oswatitsch inlet configuration. PAMM : Proceedings in applied mathematics and mechanics, 11 (1). pp. 673-674. ISSN 1617-7061. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Vuksan, Novica (2011) Platforma za pjeskarenje. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Vulić, Marko (2011) Sustav za zracnu nadopunu aviona gorivom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Vučić, Sven (2011) Metodičko konstruiranje kalupa za injekcijsko prešanje kućišta električnog sklopa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
van Deelen, N.P.G. and Jokić, Andrej and Bosch, P.P.J. van den and Hermans, R.M. (2011) Exploiting inertia of wind turbines in power network frequency control: A model predictive control approach. = Exploiting inertia of wind turbines in power network frequency control: A model predictive control approach. In: IEEE International Conference on Control Applications 2011, 28.-30.09.2017., Denver, SAD.
Zajec, Nikola (2011) Toplovodni kotao na kruto gorivo - biomasu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Zaninović, Ante (2011) Poboljšanje prognoze brzine broda istraživanjem korelacije model - brod. = Improving prediction of ship speed using correlations model-ship. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grubišić, Izvor.
Znika, Krešimir (2011) Tehnologija izradbe bešavnih čeličnih cijevi. = Seamless steel pipe manufacturing processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Math, Miljenko.
Zorc, Davor and Kunica, Zoran (2011) Effects of communication delay in implementation of automatic control tasks on distributed systems. = Effects of communication delay in implementation of automatic control tasks on distributed systems. In: Third International Conference on Production Management - ICPM 2011, 22-23.09.2011., Lodz, Poljska.
Zovak, Ivan (2011) Planiranje leta borbenog aviona primjenom modela gibanja u ravnotežnom letu. = Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Zukić, Majdin (2011) Simulacija bežičnog upravaljanja brzinom vrtnje turbine u hidroelektrani. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Ćatipović, Ivan and Čorić, Većeslav and Veić, Duje (2011) Calculation of floating crane natural frequencies based on linearized multibody dynamics. = Calculation of floating crane natural frequencies based on linearized multibody dynamics. In: ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2011, 19 do 24. 06. 2011., Rotterdam; Netherlands.
Ćosić, Boris and Krajačić, Goran and Duić, Neven (2011) Towards 100% renewable energy system: the case of Macedonia. = Towards 100% renewable energy system: the case of Macedonia. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011, Dubrovnik, Hrvatska.
Ćosić, Boris and Markovska, Nataša and Taseska, Verica and Krajačić, Goran and Duić, Neven (2011) Improving the RES absorption capacity of the macedonian energy system. = Improving the RES absorption capacity of the macedonian energy system. In: 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, 04.-07.07.2011., Novi Sad; Serbia.
Ćosić, Boris and Markovska, Nataša and Taseska, Verica and Krajačić, Goran and Duić, Neven (2011) The potential of GHG emissions reduction in Macedonia by renewable electricity. = The potential of GHG emissions reduction in Macedonia by renewable electricity. Chemical Engineering Transactions, 25. pp. 57-62. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Ćosić, Boris and Stanić, Zoran and Duić, Neven (2011) Geographic distribution of economic potential of agricultural and forest biomass residual for energy use: Case study Croatia. = Geographic distribution of economic potential of agricultural and forest biomass residual for energy use: Case study Croatia. Energy, 36 (4). pp. 2017-2028. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 3.
Ćosić, Predrag and Lisjak, Dragutin and Antolić, Dražen (2011) Estimation of Production Time by Regression and Neural Networks. = Estimation of Production Time by Regression and Neural Networks. In: 3rdInternational Scientific Conference, Management of Technology - Step to Sustainable Production MOTSP2011, 8.-10. lipnja 2011., Bol, otok Brač, Hrvatska.
Ćosić, Predrag and Lisjak, Dragutin and Antolić, Dražen (2011) Regresijska analiza i neuronske mreže kao metode za procjenu proizvodnog vremena. = Regression analysis and neural networks as methods for production time estimation. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (4). pp. 479-484. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Ćosić, Predrag and Lisjak, Dragutin and Lati, Valentina (2011) Multiobjective Optimization - Possibility for Production Improvement. = Multiobjective Optimization - Possibility for Production Improvement. In: 34th International Conference on Production Engineering, Proceedings, Proizvodno mašinstvo, 28.-30.09. 2011., Niš, Srbija.
Ćosić, Predrag and Lisjak, Dragutin and Milčić, Diana (2011) Process planning in developed knowledge database. = Process planning in developed knowledge database. In: 1st Regional Conference -Mechatronics in practice and Education MECH - CONF 2011, 08.-10.12.2011., Subotica, Srbija.
Ćosić Lesičar, Jelena and Stepanić, Josip (2011) Case study in innovation diffusion: aircraft electrical system. = Case study in innovation diffusion: aircraft electrical system. In: Information society - IS 2011, 10-14.10.2011., Ljubljana, Slovenija.
Ćurko, Ante (2011) Projekt sustava grijanja i hlađenja hostela. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Ćurko, Ante and Jurić, Ivan and Balen, Igor (2011) Modelling of the Heat Pump Operation in Typical Croatian Climatic Conditions. = Modelling of the Heat Pump Operation in Typical Croatian Climatic Conditions. In: VI. Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.09.2011, Dubrovnik, Hrvatska.
Ćurko, Daria (2011) Vrednovanje terapijskog medicinskog stola primjenom ergonomskih kriterija kao podloge za poboljšanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Ćurković, Lidija and Kumić, Ivan and Grilec, Krešimir (2011) Solid particle erosion behaviour of high purity alumina ceramics. = Solid particle erosion behaviour of high purity alumina ceramics. Ceramics International, 37 (1). pp. 29-35. ISSN 0272-8842. . .
Ćurković, Lidija and Rastovčan-Mioč, Alenka and Majić Renjo, Marijana and Župan, Josip (2011) Application of different isotherm models on lead ions sorption onto electric furnace slag. = Application of different isotherm models on lead ions sorption onto electric furnace slag. THE HOLISTIC APPROACH TO ENVIRONMENT, 1 (1). pp. 13-18. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Ćurković, Lidija and Rede, Vera and Lalić, Marijo (2011) Statistical analysis of fracture toughness of SiC ceramics determined by Vickers indentation method. = Statistical analysis of fracture toughness of SiC ceramics determined by Vickers indentation method. International Journal of Microstructure and Materials Properties, 6 (5). pp. 359-365. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Ćurković, Lidija and Trgo, Marina and Rožić, Mirela and Vukojević Medvidović, Nediljka (2011) Kinetics and thermodynamics study of copper ions removal by natura clinoptilolite. = Kinetics and thermodynamics study of copper ions removal by natura clinoptilolite. Indian journal of chemical technology, 18 (2). pp. 137-143. ISSN 0971-457X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Ćurković, Lidija and Trgo, Marina and Rožić, Mirela and Vukojević Medvidović, Nediljka (2011) Kinetics and thermodynamics study of copper ions removal by natural clinoptilolite. = Kinetics and thermodynamics study of copper ions removal by natural clinoptilolite. Indian Journal of Chemical Technology, 18 (2). pp. 137-144. ISSN 0971-457X. Vrsta rada: Original scientific paper. Kvartili JCR: Q3 (2011). .
Ćus, Maroje (2011) Primjena optičkog mjernog sustava Aramis za određivanje stabilnosti vanjskog fiksatora. = Application of the optical measurement system Aramis for determining the stability of external fixation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Ćutić, Tomislav (2011) Izmjena topline u bušotinskim izmjenjivačima topline. = Heat transfer in borehole heat exchangers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Halasz, Boris.
Čanžar, Predrag and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2011) Eksperimentalno i numeričko modeliranje zamornog ponašanja nodularnog lijeva. = Experimental and numerical modeling of fatigue behaviour of nodular cast iron. In: Susret Hrvatskog društva za mehaniku (4 ; 2011), 10.06.2011., Slavonski Brod, Hrvatska.
Čanžar, Predrag and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2011) Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron. = Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron. Key Engineering Materials, 488-48. pp. 182-185. ISSN (1662-9795). Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Čanžar, Predrag and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2011) Low-cycle Fatigue Behaviour of Nodular Cast Iron: Experiments and Numerical Modelling. = Low-cycle Fatigue Behaviour of Nodular Cast Iron: Experiments and Numerical Modelling. In: 2nd International Conference of Engineering Against Fracture, 22-24.06.2011., Mykonos, Grčka.
Čanžar, Predrag and Tonković, Zdenko and Drvar, Nenad and Bakić, Ante and Kodvanj, Janoš and Sorić, Jurica (2011) Experimental Investigation and Modelling of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. = Experimental Investigation and Modelling of Fatigue Behaviour of Nodular Cast Iron for Wind Turbine Applications. In: Eighth International Conference on Structural Dynamics EURODYN 2011, 04-06.07.2011., Leuven, Belgija.
Čatić, Igor and Barić, Gordana and Galić, Kata and Grancarić, Ana Marija and Rogić, Ana and Rujnić-Sokele, Maja and Karavanić, Ivor (2011) Draft of the basic systematization of inorganic and organic macromolecular compounds. = Draft of the basic systematization of inorganic and organic macromolecular compounds. In: 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, 01.-05.2011., Boston, MA; United States.
Čatić, Igor and Barić, Gordana and Galić, Kata and Grancarić, Anamarija and Rogić, Ana and Rujnić- Sokele, Maja and Karavanić, Ivor (2011) The basic systematisation of macromolecular compounds. = The basic systematisation of macromolecular compounds. In: 8th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenija.
Čatić, Igor and Pilipović, Ana and Rujnić-Sokele, Maja (2011) Četrdeseta obljetnica usmjerenja Prerada polimera na Fakultetu strojarstva i brodogradnje Sveučilišta u Zagrebu. = 40th Anniversary of Polymer Processing on the Faculty of Mechanical Engineering and Naval Architecture University of Zagreb. Polimeri : časopis za plastiku i gumu, 32 (1). pp. 4-11. ISSN 0351-1871. Vrsta rada: Editorial. . .
Čeh, Nikola (2011) Visokociklička zamorna čvrstoća materijala X21CrMoV12-1. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Čehil, Mislav and Bogdan, Željko and Lončar, Dražen and Katulić, Stjepko (2011) Working fluid selection in steam cycle with heat recovery steam generator. = Working fluid selection in steam cycle with heat recovery steam generator. In: 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 25-29.11.2011., Dubrovnik, Hrvatska.
Čituš, Romeo (2011) Proizvodnja drvenih peleta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Čiž, Sandra (2011) Procesni pristup održavanju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Čorić, Većeslav and Ćatipović, Ivan and Radanović, Jadranka (2011) Poboljšani model krutosti poliesterskih sidrenih linija. = An Improved Stiffness Model for Polyester Mooring Lines. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 62 (3). pp. 235-248. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Čović, Andrija (2011) Proračun kolnog sloga vučnog vozila Co'Co' po normi DIN 743. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Čukman, Vjekoslav and Kodba, Davor and Grozdek, Marino and Soldo, Vladimir (2011) Usklađivanje hrvatskog i europskog zakonodavstva u području zamjenskih tvari i tvari koje oštećuju ozonski sloj. = Harmonisation of Croatian Regulation on Substances that Deplete the Ozone Layer with European Community Regulations. In: Interklima 2011 21. međunarodni simpozij o grijanju, hlađenju i klimatizaciji, 07-08.04.2011., Zagreb, Hrvatska.
Đigaš, Ana (2011) Naprezanja konstrukcije kontejnerskog broda uslijed podrhtavanja trupa. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.
Đogašević, Nenad (2011) Analiza modela za proračune detonantnog izgaranja kod Ottovih motora s unutarnjim izgaranjem. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Đukić, Ankica and Firak, Mihajlo (2011) Hydrogen production using alkaline electrolyzer and photovoltaic (PV) module. = Hydrogen production using alkaline electrolyzer and photovoltaic (PV) module. International Journal of Hydrogen Energy, 36 (13). pp. 7799-7806. ISSN 0360-3199. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). .
Šagolj, Alen (2011) Izrada varijantnog modela podvozja vatrogasnog vozila. = Creation of the undercarriage of the fire fighting vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Šarić, Ivan (2011) Prijedlog upravljanja u elektrostrojarskoj proizvodnji. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.
Šarović, Kristina (2011) Usporedba kriterija popuštanja primijenjenih na ojačane avionske kompozitne panele. = Comparison of failure criteria applied on stiffened composite aircraft panels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Šavar, Mario and Džijan, Ivo and Mikulčić, Hrvoje and Kuhar, Matija (2011) Strategija održavanja cjevovodnih sustava. = Maintain strategy of pipeline networks. In: Međunarodni kongres Dani inženjera strojarstva (2 ; 2011), 23.-26.03.2011, Split, Hrvatska.
Šavar, Mario and Pacak, Matija and Džijan, Ivo and Korade, Ivan (2011) Koeficijent otpora poroznog zida. = Resistance coefficient of porous wall. In: Četvrti susret Hrvatskog društva za mehaniku, 10. lipnja 2011., Slavonski brod, Croatia.
Šegota, Suzana and Ćurković, Lidija and Ljubas, Davor and Svetličić, Vesna and Fiamengo Houra, Ivona and Tomašić, Nenad (2011) Synthesis, characterization and photocatalytic properties of sol-gel TiO2 films. = Synthesis, characterization and photocatalytic properties of sol-gel TiO2 films. Ceramics International, 37 (4). pp. 1153-1160. ISSN 0272-8842. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2011). Točan broj autora: 6.
Šegotić, Branimir (2011) Projekt sustava klimatizacije trgovačkog centra. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Šercer, Davor (2011) Zaštita ukopanih čeličnih konstrukcija prevlakama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Šestan, Domagoj (2011) Proizvodnja autodijelova u Hrvatskoj. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Šikić, Zvonimir (2011) Generalized Pythagorean Comma. = Generalized Pythagorean Comma. In: CroArtScia2011, 4.-7.5.2011., Zagreb, Hrvatska.
Šimac, Nikša (2011) Utjecaj dubokog hlađenja na mikrostrukturu i svojstva čelika X155CrVMo12-1. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Šimunić, Nikola (2011) Ambalaža i pakiranje meda u saću. = Packaging and packing of honey in the comb. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Šimunović, Vedran and Ferdelji, Nenad and Katić, Marko and Mudronja, Vedran (2011) Calculation of pitch diameter of symetrical thread plug gauges. = Calculation of pitch diameter of symetrical thread plug gauges. In: 13th International Scientific Conference on Production Engineering CIM 2011, 16-18.06.2011., Biograd, Hrvatska.
Šitum, Željko (2011) Electrohydraulic servosystems for position, velocity and force control. = Electrohydraulic servosystems for position, velocity and force control. In: Fluidna tehnika 2011, 15-16.09.2011., Maribor, Slovenija.
Šitum, Željko (2011) Force and positon control of a hydraulic press. = Force and positon control of a hydraulic press. Ventil, 17 (4). pp. 314-320. ISSN 1318-7279. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.
Šitum, Željko (2011) Teaching control using mechatronic systems with pneumatic drive. = Teaching control using mechatronic systems with pneumatic drive. In: Fluidna tehnika 2011, 15-16. 09. 2011., Maribor, Slovenija.
Šitum, Željko and Milić, Vladimir and Žilić, Tihomir and Essert, Mario (2011) Design, construction and computer control of a hydraulic press. = Design, construction and computer control of a hydraulic press. In: 12th Scandinavian International Conference on Fluid Power, SICFP'11, 18-20.05.2011., Tampere, Finska.
Šoda, Ante and Mannini, Claudio and Sjerić, Momir (2011) Investigation of unsteady air flow around two-dimensional rectangular cylinders. = Investigation of unsteady air flow around two-dimensional rectangular cylinders. Transactions of FAMENA, 35 (2). pp. 11-34. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). Točan broj autora: 3.
Šolić, Sanja (2011) Utjecaj mikrostrukture brzoreznog čelika na tribološka svojstva reznih alata. = Influence of the high speed steel microstructure on tribological properties of cutting tools. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Šoški, Josipa (2011) Parna turbina za geotermalnu elektranu Rečica. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Špehar, Mateja (2011) Razvoj sustava naplate naknada za emisije ugljik dioksida iz motora cestovnih vozila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Špendić, Bojan (2011) Projekt vozila za utrke Formule student. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Šramek, Mislav (2011) Analiza rada hibridnog pogona. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Štajdohar-Pađen, Olga (2011) Elementi osiguranja kvalitete kod izgradnje elektroenergetskih objekata. = Elements of quality assurance in the construction of electrical power facilities. Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Štambuk, Darko (2011) Sustav za normirano ispitivanje industrijskih robota. = The system for standardised testing of industrial robots. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Štefanac, Davorin (2011) Umjeravanje etalona pravoga kuta. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahović, Sanjin.
Štefanec, Kristijan (2011) Kombi blok u regulaciji djelatne snage i frekvencije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Štipak, Marko (2011) Zaštita čeličnih konstrukcija viskoelastičnom prevlakom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Štorga, Mario and Bojčetić, Nenad and Pavković, Neven and Stanković, Tino (2011) Traceability of Engineering Information Development in PLM Framework. = Traceability of Engineering Information Development in PLM Framework. In: 8th PLM International Conference PLM11, 11-13.07.2011., Eindhoven, Nizozemska.
Štorga, Mario and Marjanović, Dorian and Savšek, Tomaž (2011) Reference model for traceability records implementation in engineering design environment. = Reference model for traceability records implementation in engineering design environment. In: 18th International Conference on Engineering Design, ICED 11, 15-18-08.2011., Copenhagen; Denmark.
Štulina, šime (2011) Karakterizacija Pitot-statičkih cijevi. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Šuflaj, Mislav (2011) Izrada varijantnog modela statorske jezgre hidrogeneratora. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Autonomous planning framework for distributed multiagent robotic systems. = Autonomous planning framework for distributed multiagent robotic systems. In: 2nd IFIP WG 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2011, 21-23.02.2011., Costa de Caparica; Portugal.
Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Cooperative robotic assembly system. = Cooperative robotic assembly system. In: International Conference on Intelligent Computing and Intelligent Systems, 18-20.11.2011., Guangzhou, Kina.
Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Multiagent robotic collaborative framework. = Multiagent robotic collaborative framework. In: Annals of DAAAM for 2011 and 22nd International DAAAM Symposium "Intelligent Manufacturing and Automation: Power of Knowledge and Creativity", 23-26.11.2011., Beč, Austrija.
Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) Service oriented robotic assembly architecture. = Service oriented robotic assembly architecture. In: 13th International Scientific Conference on Production Engineering, 16-18.06.2011., Biograd, Hrvatska.
Švaco, Marko and Šekoranja, Bojan and Jerbić, Bojan (2011) A multiagent framework for industrial robotic applications. = A multiagent framework for industrial robotic applications. In: Complex Adaptive Systems, 31.10-02.11.2011., Chicago, IL, United States.
Žakula, Tea and Gayeski, Nicholas Thomas and Armstrong, Peter Ross and Norford, Leslie Kieth (2011) Variable-speed heat pump model for a wide range of cooling conditions and loads. = Variable-speed heat pump model for a wide range of cooling conditions and loads. HVAC&R research, 17 (5). pp. 670-691. ISSN 1078-9669. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2011). Točan broj autora: 4.
Žarko, Hrvoje (2011) Optimizacija proizvodnih procesa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Židov, Bruno (2011) Utjecaj emulzija na brzinu korozije čeličnog obratka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Žigrović, Dubravko (2011) Naprava za centriranje cijevi kod zavarivanja na radilištu. = Pipe centering device for in situ welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Žiha, Kalman (2011) Modeling of worsening. = Modeling of worsening. In: International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011, 19-22.07.2011., Orlando, FL; United States.
Žiha, Kalman and Stanković, Tino and Marjanović, Dorian (2011) Tracing Engineering Evolution with Evolutionary Algorithms. = Tracing Engineering Evolution with Evolutionary Algorithms. In: Evolutionary Algorithms. InTech, Vienna, pp. 247-268. ISBN 978-953-307-171-8
Žičkar, Roman (2011) Optimiranje u projektiranju industrijskih transformatora. = Optimum design of industrial transformers. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ščap, Dragutin.
Žokalj, Martina (2011) Analiza ergonomskih uredskih stolica kao podloga za konstruiranje zdravih uredskih stolica. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Župan, Josip and Filetin, Tomislav and Landek, Darko (2011) Cooling characteristics of the water based nanofluids in quenching. = Cooling characteristics of the water based nanofluids in quenching. In: International Conference MATRIB 2011. : Materials/tribology/Recycling, Vela Luka, Hrvatska.
Žvorc, Vlado (2011) Konstrukcijsko rješenje preše za duboki tisak. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
