Items where Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Z | Ć | Č | Đ | Š | Ž
Number of items: 847.

A

Alar, Vesna and Stojanović, Ivan and Šimunović, Vinko (2014) Mehanizmi zaštite od korozije (praktikum za vježbe). = Mechanisams of Corrosion Protection (practicum for exercise). [Teaching Resource] (Unpublished)

Alar, Vesna and Stojanović, Ivan and Šimunović, Vinko and Novak, Tomislav (2014) Crevice corrosion resistance of high alloyed materials in 3.5% NaCl solution. = Crevice corrosion resistance of high alloyed materials in 3.5% NaCl solution. International Journal of Materials Research, 105 (6). pp. 603-606. ISSN 1862-5282. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.

Alar, Vesna and Šimunović, Vinko and Stojanović, Ivan (2014) Kemijska obrada površine nehrđajućeg čelika AISI 304L i utjecaj na korozijsku otpornost. = Chemical surface treatment of AISI 304L stainless steel and influence on corrosion resistance. Zavarivanje, 3/4. pp. 93-101. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Alberg Ostergaard, Poul and Duić, Neven (2014) Sustainable Energy, Water and Environmental Systems. = Sustainable Energy, Water and Environmental Systems. International Journal of Sustainable Energy Planning and Management, 3. pp. 1-4. ISSN 2246-2929. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Aleksandrov Fabijanić, Tamara (2014) Razvoj referentnih pločica tvrdoće po Vickersu postupkom metalurgije praha. = Development of reference Vickers hardness blocks by powder metallurgy process. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Franz, Mladen.

Aleksandrov Fabijanić, Tamara and Alar, Željko and Pötschke, Johannes (2014) Potentials of nanostructured WC-Co hardmetal as reference material for Vickers hardness. = Potentials of nanostructured WC-Co hardmetal as reference material for Vickers hardness. International Journal of Refractory Metals and Hard Materials, 50. pp. 126-132. ISSN 0263-4368. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Aleksandrov Fabijanić, Tamara and Franz, Mladen and Alar, Željko (2014) Hardness uniformity of vickers hardness blocks for the high hardness range. = Hardness uniformity of vickers hardness blocks for the high hardness range. In: 12th IMEKO TC5 Conference on the Measurement of Hardness 2014, 03-06.02.2014., Cape Town; South Africa.

Alimani, Ervin (2014) Stroj za rezanje i cjepanje ogrjevnog drva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Alujević, Neven and Campillo-Davo, Nuria and Kindt, Peter and Desmet, Wim and Pluymers, Bert and Vercammen, Stijn (2014) Simplified rotating tire models based on cylindrical shells with free boundary conditions. = Simplified rotating tire models based on cylindrical shells with free boundary conditions. In: FISITA 2014 World Automotive Congress, 02.-06.06. 2014., Maastricht, Nizozemska.

Alujević, Neven and Campillo-Davo, Nuria and Kindt, Peter and Desmet, Wim and Pluymers, Bert and Vercammen, Stijn (2014) A simplified model of a rotating tire using cylindrical shells with free ends supported by an elastic foundation. = A simplified model of a rotating tire using cylindrical shells with free ends supported by an elastic foundation. In: International Conference on Noise and Vibration Engineering, 15.-17.09.2014., Leuven, Belgija.

Alujević, Neven and Zhao, Guoying and Depraetere, Bruno and Sas, Paul and Pluymers, Bert and Desmet, Wim (2014) H2 optimal vibration control using inertial actuators and a comparison with tuned mass dampers. = H2 optimal vibration control using inertial actuators and a comparison with tuned mass dampers. Journal of sound and vibration, 333 (18). pp. 4073-4083. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 6.

Andrijević, Sandro (2014) Matematički model kogeneracijskog postrojenja na biomasu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Andrić, Jerolim and Bičak, Mateja and Kitarović, Stanislav (2014) IACS incremental - iterative method in progressive collapse analysis of various hull girder structures. = IACS incremental - iterative method in progressive collapse analysis of various hull girder structures. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 65 (1). pp. 65-78. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 3.

Andrić, Jerolim and Kitarović, Stanislav and Plavšić, Maja and Žarko, Ana (2014) Uzdužna granična čvrstoća oštećenog trupa tankera. = Hull girder ultimate strength of a damaged oil tanker. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Andrić, Marijan (2014) Model leta bespilotne letjelice konfiguracije letećeg krila. = Flight Model for Unmanned Aircraft with Flying Wing Configuration. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Antić, Domagoj (2014) Projektiranje pokretne hidrauličke platforme. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.

Antić, Ivan (2014) Automatizacija laboratorijskog uređaja za ispitivanje ohlađivanja u toplinskoj obradi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Antonić, Ivana (2014) Mlin za biootpad u domaćinstvu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Ančić, Ivica and Šestan, Ante and Virag, Zdravko (2014) Determination of Actual Discharge of High-Pressure Low-Discharge Axial Piston Pumps. = Determination of Actual Discharge of High-Pressure Low-Discharge Axial Piston Pumps. Transactions of FAMENA, 38 (2). pp. 1-10. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola and Klisarić, Vedran (2014) Influence of new power sources on the attained EEDI. = Influence of new power sources on the attained EEDI. In: International Conference on Influence of EEDI on Ship Design, 24-25.09.2014., London, UK.

Arambašić, Đorđe (2014) Analiza pristupa optimizaciji robotiziranog MAG zavarivanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Avirović, Igor (2014) Napajanje odljevaka. = The feeding of castings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Azenić, Adam (2014) Numerička simulacija povezanog numeričkog modela strujanja i akustičkog modela. = Numerical simulation of acoustic response coupled with flow. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Ašperger, Danijela and Varga, Ines and Babić, Sandra and Ćurković, Lidija (2014) Adsorption of enrofloxacine on natural zeolite - clinoptilolite. = Adsorption of enrofloxacine on natural zeolite - clinoptilolite. The Holistic Approach to Environment, 4 (1). pp. 3-15. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Ašperger, Danijela and Ćurković, Lidija and Horvat, Alka J.M. and Kaštelan-Macan, Marija (2014) Optimization condition for thin-layer identification of bronzes after anodic sampling. = Optimization condition for thin-layer identification of bronzes after anodic sampling. Journal of Planar Chromatography - Modern TLC, 27 (2). pp. 84-87. ISSN 0933-4173. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.

B

Babak, Tatiana and Khavin, Gennadii and Krajačić, Goran and Duić, Neven (2014) Possibility of heat pump use in central hot water supply system. = Possibility of heat pump use in central hot water supply system. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES Ohrid 2014, 29.06.-03.07.2014., Ohrid, Makedonija.

Babić, Damir (2014) Karakterizacija aluminiziranih slojeva nehrđajučih čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Babić, Dario (2014) Istraživanje utjecaja tehnoloških parametara na sile rezanja kod tokarenja. = Study of influence of technological parameters on the cutting forces by turning. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škorić, Stephan.

Babić, Vedran (2014) Učinkovitost primjene suvremenih obradnih sustava. = Efficiency of applying modern machining systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Bach, Neven (2014) E-poslovanje i upravljanje znanjem. = E-business and knowledge management. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus (2014) Modelling and implementation of surface tension effects into CFD wall film module. = Modelling and implementation of surface tension effects into CFD wall film module. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES Ohrid 2014, 29.06.-03.07.2014., Ohrid, Makedonija.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus (2014) Numerical modelling of film separation in CFD wall film module. = Numerical modelling of film separation in CFD wall film module. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Baleta, Jakov and Vujanović, Milan and Pachler, Klaus and Duić, Neven (2014) Implementation and validation of the mathematical model of surface tension into CFD wall film module. = Implementation and validation of the mathematical model of surface tension into CFD wall film module. In: Joint 11th World Congress on Computational Mechanics, WCCM 2014, the 5th European Conference on Computational Mechanics, ECCM 2014 and the 6th European Conference on Computational Fluid Dynamics, ECFD 2014, 20-25.07.2014., Barcelona; Spain.

Barbarić, Ivan (2014) Razvoj novog prototipa solarnog desalinizatora. = Development of a new solar still prototype. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Barbarić, Marina (2014) Fleksibilno vođenje energetskog sustava. = Flexible operation of energy system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Barić, Igor (2014) Tehno-ekonomska analiza male hidroelektrane. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.

Barle, Jani and Franulović, Marina and Jurčević Lulić, Tanja and Kladarić, Ivica and Markučič, Damir and Radić, Gojmir (2014) Izrada kataloga znanja, vještina i kompetencija za studije strojarstva u Republici Hrvatskoj. = Development of catalogue of knowledge, skills and competences for mechanical engineering studies in Croatia. In: Međunarodna stručna konferencija ME4CataLOgue, 04-05.12.2014., Slavonski Brod, Hrvatska.

Bartulić, Ivan (2014) Statističke metode pri upravljanju procesima. = Statistical methods in process management. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Baršić, Gorana and Mahović, Sanjin and Katić, Marko and Šimunović, Vedran (2014) Long term stability of silicon roughness standards. = Long term stability of silicon roughness standards. In: 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, 02-06.06.2014., Dubrovnik; Croatia.

Batas Bjelić, Ilija and Rajaković, Nikola and Krajačić, Goran and Duić, Neven (2014) Valuing the moderation options in Serbia for higher wind penetrations. = Valuing the moderation options in Serbia for higher wind penetrations. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Batas Bjelić, Ilija and Skokljev, Ivan and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven (2014) Integrating the flexibility of the average Serbian consumer as a virtual storage option into the planning of energy systems. = Integrating the flexibility of the average Serbian consumer as a virtual storage option into the planning of energy systems. Thermal Science, 18 (3). pp. 743-754. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2014). Točan broj autora: 5.

Bačelić Medić, Zlatko and Pukšec, Tomislav and Mathiesen, Brian Vad and Duić, Neven (2014) Modelling energy demand of Croatian industry sector. = Modelling energy demand of Croatian industry sector. International Journal of Environment and Sustainable Development, 13 (1). pp. 74-92. ISSN 1474-6778. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Bačić, Ivana and Otmačić Ćurković, Helena and Ćurković, Lidija (2014) Corrosion behaviour of the yttria stabilized sol - gel ZrO2 thin film on 316L stainless steel. = Corrosion behaviour of the yttria stabilized sol - gel ZrO2 thin film on 316L stainless steel. In: Eurocorr 2014, 08-12.09.2014., Pisa, Italija.

Bašić, Josip and Degiuli, Nastia and Werner, Andreja (2014) Simulation of water entry and exit of a circular cylinder using the isph method. = Simulation of water entry and exit of a circular cylinder using the isph method. Transactions of FAMENA, 38 (1). pp. 45-62. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Beaudoin, M. and Nilsson, H. and Page, M. and Jasak, Hrvoje (2014) Evaluation of an improved mixing plane interface for OpenFOAM. = Evaluation of an improved mixing plane interface for OpenFOAM. In: 27th IAHR Symposium on Hydraulic Machinery and Systems, 22-26.09.2014., Montreal, Kanada.

Bednjanec, Filip (2014) Procjena kvalitete mjernog sustava. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Begović, Toni (2014) Uređaj za brušenje rubova staklenih ploča. = Glass edging machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Belamarić, Branko and Žanić, Vedran and Prebeg, Pero (2014) Višeciljno donošenje odluke o strategiji održavanja broda uzimajući u obzir utjecaj na okoliš. = Multiattribute decision making methodology for maintenance strategy with ecological considerations. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Belić, Damir (2014) Razvoj kolica za osobe s posebnim potrebama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Belić, Damir and Kunica, Zoran (2014) Development of wheelchair for people with special needs. = Development of wheelchair for people with special needs. In: International Conference "Management of Technology - Step to Sustainable Production" (MOTSP 2014), 11-13.06.2014., Bol, Hrvatska.

Berković-Šubić, Mihaela (2014) Primjena infracrvene termografije kod mehaničkog ispitivanja materijala. = Application of infrared thermography to mechanical testing of materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Boras, Ivanka and Tonković, Zdenko.

Berković-Šubić, Mihaela and Rauch, Martina and Dović, Damir and Andrassy, Mladen (2014) Primary energy consumption of the dwelling with solar hot water system and biomass boiler. = Primary energy consumption of the dwelling with solar hot water system and biomass boiler. Energy Conversion and Management, 87. pp. 1151-1161. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.

Bernardić, Makso (2014) Obrada otpadne vode iz procesa mercerizacije. = Treatment of mercerization wastewater. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.

Bernat, Marija (2014) Karakterizacija materijala oklopa morskih školjaka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Bervida, Ivica (2014) Degradacija TiMg legura. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Bešenić, Tibor (2014) Optimalni pogon organskog Rankineovog ciklusa u iskorištavanju otpadne topline. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Bičak, Mateja (2014) Analiza progresivnog kolapsa trupa broda zasnovana na σ-ε krivuljama određenim pomoću nelinearne metode konačnih elemenata. = Hull girder progressive collapse analysis based on σ-ε curves determined by the nonlinear finite element method. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Bišćan, Marija (2014) Analiza mehanički spojenih kompozitnih zrakoplovnih konstrukcija. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.

Blašković, Marko (2014) Biomehanika srednjeg uha. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Blažić, Mislav (2014) Kritična brzina vrtnje stupnjevanog vratila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Boban, Luka (2014) Parametarska analiza bušotinskog izmjenjivača topline u tlu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Bodrušić, Toni (2014) Analiza pravilnika za ispitivanje kočnica cestovnih motornih vozila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Bolfan, Domagoj (2014) Komparativna analiza rezanja plazmom i vodenim mlazom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Bonačić, Filip (2014) Analiza zamora krajnje polne ploče sinkronog hidrogeneratora. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Boršić, Saša (2014) Primjena polimernih materijala u nogometu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Bosiljkov, Tomislav and Karlović, Sven and Semenski, Damir and Brnčić, Mladen and Tripalo, Branko and Ježek, Damir and Dujmić, Filip (2014) Implementation of Ultrasound and High Hydrostatic Pressures as Useful Mechanical Methods in Food Processing. = Implementation of Ultrasound and High Hydrostatic Pressures as Useful Mechanical Methods in Food Processing. In: 31st Danubia Adria Symposium on Advances in Experimental Mechanics, 24-27.09.2014., Kempten, Njemačka.

Botić, Slaven (2014) Otpornost na erozju česticama duboko hlađenog izotermički poboljšanog nodularnog lijeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Bošković, Tomislav (2014) Mapiranje proizvodnih procesa poduzeća. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Božić, Domagoj (2014) Radni katamaran za ribogojilišta. = Catamaran workboat for fish farms. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Slapničar, Vedran.

Božić, Mladen and Ilinčić, Petar and Lulić, Zoran and Vučetić, Ante (2014) Retrofit of a roller brake tester at FAMENA. = Retrofit of a roller brake tester at FAMENA. Transactions of FAMENA, 38 (3). pp. 95-102. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 4.

Božić, Željko and Schmauder, Siegfried (2014) Fracture Modeling of Damaged Stiffened Panels under Lateral Pressure Load. = Fracture Modeling of Damaged Stiffened Panels under Lateral Pressure Load. In: 20th European Conference on Fracture, 30th of June - 4th of July, Trondheim, Norway.

Božić, Željko and Schmauder, Siegfried and Mlikota, Marijo and Hummel, Martin (2014) Multiscale fatigue crack growth modelling for welded stiffened panels. = Multiscale fatigue crack growth modelling for welded stiffened panels. Fatigue and Fracture of Engineering Materials and Structures, 37 (9). pp. 1043-1054. ISSN 8756-758X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.

Brajko, Nikola (2014) Parna turbina za geotermalnu elektranu Slatina. = Steam turbine for geothermal power plant Slatina. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.

Bralić, Krešimir (2014) Protupotlačni sigurnosni ventil na vrećastom filtru. = Low pressure preventing valve on a baghouse filter. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ruševljan, Miroslav and Tuković, Željko.

Bratić, Robert (2014) Konstrukcija naprave za vježbanje mišića ramenog zgloba. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Bračun, Dalibor (2014) Elektrokemijski postupci obrade površine nerđajućeg čelika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.

Brcko, Božidar (2014) Utjecaj modifikacije eutektika aluminij-silicij i brzine hlađenja na mehanička svojstva odljevka. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Brezak, Hrvoje (2014) Upravljanje hodajućeg robota pokretanog umjetnim pneumatskim mišićima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Brkić, Janko (2014) Kondenzacijska parna turbina kogeneracijske termoelektrane na biomasu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.

Brozović, Juraj and Demoli, Nazif and Farkaš, Nina and Sušić, Mato and Alar, Željko and Gabrić Pandurić, Dragana (2014) Properties of axially loaded implant-abutment assemblies using digital holographic interferometry analysis. = Properties of axially loaded implant-abutment assemblies using digital holographic interferometry analysis. Dental Materials, 30 (3). e17-e27. ISSN 0109-5641. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 6.

Buljac, Andrija (2014) Utjecaj vozila i ograde na aeroelastične karakteristike sekcije mosta. = Effects of vehicles and railings on aeroelastic behavior of bridge deck. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje and Pospišil, Stanislav.

Buljac, Ante (2014) Proračun izgaranja Ottovog motora primjenom 3-D CFD proračuna. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Burazer, Frane (2014) Proračun poniranja i posrtanja na harmonijskim valovima metodom rubnih elemenata. = Analysis of heaving and pitching in harmonic waves by boundary method. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čorić, Većeslav.

Bužančić Primorac, Branka and Parunov, Joško (2014) Reduction of the ultimate strength due to crack propagation in damaged ship structure. = Reduction of the ultimate strength due to crack propagation in damaged ship structure. In: 15th International Congress of the International Maritime Association of the Mediterranean, IMAM 2013;, 14-17.10.2013., A Coruna, Spain.

Bužančić Primorac, Branka and Parunov, Joško and Žiha, Kalman (2014) Utjecaj bočnog nagiba na granični moment savijanja oštećenog broda. = Influence of the heeling angle on ultimate bending capacity of damaged ship. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Bužančić Primorac, Branka and Parunov, Joško and Žiha, Kalman (2014) Vjerojatnosni model smanjenja granične čvrstoće oštećenog nasukanog broda. = Probabilistic model of ultimate strength reduction of grounded ship. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

C

Cajner, Franjo and Landek, Darko and Cajner, Hrvoje and Rafael, Hrvoje and Kovačić, Saša (2014) Characteristics of Warm Baths for the quenching of Tool Steels. = Characteristics of Warm Baths for the quenching of Tool Steels. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 09.-11.04.2014., Ljubljana, Slovenija.

Cajner, Franjo and Landek, Darko and Kumić, Ivan and Kovačić, Saša and Rafael, Hrvoje (2014) Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. = Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Cajner, Franjo and Leskovšek, Vojteh and Pustaić, Dragan (2014) Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. = Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.

Cajner, Hrvoje and Mačković, Mario and Štefanić, Nedeljko and Grubešić, Nikola (2014) Characterization of the explosion of flammable gas in closed pipes using the design of experiments methodology. = Characterization of the explosion of flammable gas in closed pipes using the design of experiments methodology. In: 6th International Scientific Conference Management of Technology – Step to Sustainable Production, 11.-13. lipanj 2014., Bol, Island Brac, Croatia.

Car, Mario (2014) Otpornost na trošenje ZrO2 sol-gel filmova. = Wear resistance of ZrO2 sol-gel films. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Carek, Ivan (2014) Usporedba mehaničkih svojstava zavara čelika SA 516 Gr 70 Mod LTV Nakon i bez provedene toplinske obrade. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Cash, Phillip and Stanković, Tino and Štorga, Mario (2014) Using visual information analysis to explore complex patterns in the activity of designers. = Using visual information analysis to explore complex patterns in the activity of designers. Design studies, 35 (1). pp. 1-28. ISSN 0142-694X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Cerovac, Tin and Ćosić, Boris and Pukšec, Tomislav and Duić, Neven (2014) Wind energy integration into future energy systems based on conventional plants - The case study of Croatia. = Wind energy integration into future energy systems based on conventional plants - The case study of Croatia. Applied Energy, 135. pp. 643-655. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.

Cerovečki, Marko (2014) Konstrukcija kalupa za izradu polimerne osovine. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Cerovšek, Katarina (2014) Odabir alatnih strojeva u projektiranju tehnoloških procesa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Cerovšek, Katarina and Ćosić, Predrag (2014) Machine tools selection in process planning using the AHP method. = Machine tools selection in process planning using the AHP method. In: 6th International Scientific Conference Management of Technology - Step to Sustainable Production, 11.-13.0. 2014., Bol, Hrvatska.

Cesar, Filip (2014) Šumska traktorska prikolica. = Forest tractor trailer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Cesarec, Davor (2014) Zaštita vjetroturbina premazima. = Wind turbine coatings protection. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2014) Free vibration analysis of rectangular plates with multiple rectangular openings and arbitrary edge constraints. = Free vibration analysis of rectangular plates with multiple rectangular openings and arbitrary edge constraints. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2014) Numerical procedure for the vibration analysis of arbitrarily constrained stiffened panels with openings. = Numerical procedure for the vibration analysis of arbitrarily constrained stiffened panels with openings. International Journal of Naval Architecture and Ocean Engineering, 6 (4). pp. 763-774. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 3.

Christoforidis, Georgios and Papagiannis, Grigoris and Brain, Mike and Pukšec, Tomislav (2014) Establishing an assessment framework for energy sustainability in prisons: The E-SEAP project. = Establishing an assessment framework for energy sustainability in prisons: The E-SEAP project. In: 14th International Conference on Environment and Electrical Engineering, EEEIC 2014, 10-12.05.2014., Krakow; Poland.

Cigić, Igor (2014) Projekt ispitne stanice za kotlove na drvene pelete. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Ciković, Zoran (2014) Optimiranje parametara PID regulatora primjenom genetskih algoritama. = Optimisation of PID controller parameters using genetic algorithms. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Cindori, Mihael (2014) Numerička simulacija vrtložnog plamenika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Cipek, Mihael and Škugor, Branimir and Deur, Joško (2014) Comparative analysis of conventional and electric delivery vehicles based on realistic driving cycles. = Comparative analysis of conventional and electric delivery vehicles based on realistic driving cycles. In: European Electric Vehicle Congress EEVC-2014, 02-05.12.2014., Brussels, Belgija.

Crneković, Martin (2014) Dimenzionalna kontrola prigušivača vibracija na vodičima dalekovoda. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Crnko, Martina (2014) Okolišna procjena proizvoda u tehnološkom procesu cinčanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Crnčević, Dino (2014) Sustav ventilacije kabina za ispitivanje motora sa unutrašnjim izgaranjem. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Cundeković, Marko (2014) Izbor materijala temeljen na ontologiji povezanih podataka. = Material Selection Based on the Ontology of Linked Data. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Cvjetković, Ivo (2014) Projektiranje hidraulički pogonjenog robotskog manipulatora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

D

Debelec, Antonio (2014) Modeliranje dinamike satelita upotrebom lokalnih koordinata 3D rotacije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Terze, Zdravko.

Degiuli, Nastia and Ćatipović, Ivan and Martić, Ivana and Werner, Andreja and Čorić, Većeslav (2014) Influence of added resistance in regular waves on ship fuel consumption. = Influence of added resistance in regular waves on ship fuel consumption. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems, 20- 27.09.2014., Venice-Istanbul.

Deković, Dean (2014) Uređaj za demontažu komponenti s matičnih ploča osobnih računala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Delač, Domagoj (2014) Klasifikacija postupaka zavarivanja prema HRN EN ISO 4063. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Delić, Korana (2014) Materijali obnovljivog porijekla u izradi kompozita. = Materials of renewable origin in the production of composites. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Deur, Joško and Čorić, Mirko and Kasać, Josip and Assadian, Francis and Hrovat, Davor (2014) Applications of computational optimal control to vehicle dynamics. = Applications of computational optimal control to vehicle dynamics. Lecture Notes in Control and Information Sciences, 455. pp. 131-146. ISSN 0170-8643. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Deur, Joško and Škugor, Branimir and Cipek, Mihael (2014) Integration of electric vehicles into energy and transport systems. = Integration of electric vehicles into energy and transport systems. In: 34th Conference on Automation in Transportation, 05-09.11.2014., Dubrovnik.

Dizdarević, Alen (2014) Razvoj računalne podrške za metodu analize automatske sklopivosti proizvoda. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Dogan, Ivan and Maričić, Sven and Kranjčević, Lado and Pilipović, Ana and Kovačević Pavičić, Daniela (2014) The Application of 3D Modelling in Biofluid Mechanics. = The Application of 3D Modelling in Biofluid Mechanics. In: 5th International Conference on additive Technologies - iCAT 2014, 15-17.10.2014., Beč, Austrija.

Dogančić, Bruno (2014) Analiza čvrstoće glavčine vjetroagregata. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Dolić, Natalija and Garašić, Ivica and Malina, Jadranka and Kožuh, Zoran (2014) Testing of mechanical properties of almg4.5mn alloy welded by mig procedure and impact of hydrogen on mechanical properties of the welded joint. = Testing of mechanical properties of almg4.5mn alloy welded by mig procedure and impact of hydrogen on mechanical properties of the welded joint. In: 40th CWS International Conference WELDING 2014, Šibenik, Solaris, Hrvatska.

Dominković, Dominik Franjo and Bačelić Medić, Zlatko and Ćosić, Boris and Duić, Neven (2014) An Optimization Model for Combining Seasonal Pit Thermal Energy Storage and Biomass Trigeneration Energy System. = An Optimization Model for Combining Seasonal Pit Thermal Energy Storage and Biomass Trigeneration Energy System. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29-03.07.2014, Ohrid, Makedonija.

Dominković, Matej (2014) Opružno-prigušne karakteristike ovjesa bolida Formula Student. = Spring and Damping Characteristic of Formula Student Race Car Suspension System. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Doračić, Borna (2014) Usporedba tehnologija za proizvodnju električne energije za EES RH. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Dorić, Luka (2014) Mapiranje i unapređenje procesa uslužnoga poduzeća. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Dorić, Vicko (2014) Konstrukcija turboekspandera za organski Rankineov ciklus (ORC). = Design of turbo-expanders for organic Rankine cycle (ORC). Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.

Dorotić, Hrvoje (2014) Parna turbina za pogon parne turbine. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.

Draganja, Duje (2014) Statička analiza fiksne rešetkaste platforme za rad u Jadranskom moru. = Static analysis of fixed jacket offshore platform for operation in Adriatic sea. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćatipović, Ivan.

Drobilo, Luka and Rudan, Smiljko (2014) NFEM analysis of a composite made hull of autonomous underwater submersible. = NFEM analysis of a composite made hull of autonomous underwater submersible. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 65 (3). pp. 101-115. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 2.

Družinec, Mirna (2014) Analiza energetskog svojstva zgrada sa sunčanim toplovodnim sustavom. = Energy performance analysis of buildings with solar hot water system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Duboković, Marin (2014) Karakterizacija materijala zavara čelika API 5L X80. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Dubreta, Nikša (2014) Integration of Social Sciences and Humanities into Mechanical Engineering Curriculum. = Integration of Social Sciences and Humanities into Mechanical Engineering Curriculum. Interdisciplinary description of complex systems, 12 (4). pp. 137-150. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Dubreta, Nikša (2014) Inženjeri u društvu – u društvu s inženjerima: integracija društveno-humanističkih kolegija u akademski studijski program strojarstva u Hrvatskoj. = With Engineers in Society: Integration of Social Sciences and Humanities into Mechanical- Engineering Academic Curriculum in Croatia. In: Međunarodna stručna konferencija ME4Catalogue, 04.-05.12.2014., Slavonski Brod, Hrvatska.

Dugorepec, Andrija (2014) Zaštita metalnih konstrukcija inhibitorima korozije. = Protection of metal structures by corrosion inhibitors. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Duić, Neven (2014) Journal of Sustainable Development of Energy, Water and Environment Systems – Volume II. = Journal of Sustainable Development of Energy, Water and Environment Systems – Volume II. Journal of Sustainable Development of Energy, Water and Environment Systems, 2 (4). p. 422. ISSN 1848-9257. Vrsta rada: Editorial. . .

Duić, Neven and Rosen, Marc A (2014) Sustainable development of energy systems. = Sustainable development of energy systems. Energy Conversion and Management, 87. pp. 1057-1062. ISSN 0196-8904. Vrsta rada: Editorial. Kvartili JCR: Q1 (2014). Točan broj autora: 2.

Dujmić, Dinko (2014) Primjena višekriterijalnog odlučivanja u odabiru lokacije skladišta. = Application of multi criteria decision making in warehouse location problem. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Dujmović, Marko (2014) Provjera logističkih aktivnosti vanjskim pružateljima usluga u poduzeću L´oreal Adria d.o.o. Hrvatska. = Logistics outsourcing in L'oreal Adria d.o.o. Croatia. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Duvnjak, Krešimir (2014) Ocjena karakteristika koordinatnih mapa pri numeričkoj integraciji 3D rotacije satelita. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Terze, Zdravko.

Dušak, Martin (2014) Tehnoekonomska analiza proizvodnje biciklističkih dijelova od kompozitnih tvorevina. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

E

Ercegovac, Matej (2014) Proračun aksijalne plinske turbine za turbopunjač. = Design of an axial flow gas turbine for turbocharger. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Eterović, Ozren (2014) Dotrajavanje implantata u ortopediji. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Ević, Dražen (2014) Hidrodinamički i tehnološki aspekti kape brodskog vijka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.

F

Fabac, Robert and Stepanić, Josip (2014) Introduction. = Introduction. In: With & Within Complex Systems. Business Systems- Book Series . Business Systems Laboratory, Charleston, SC, USA, pp. 1-10. ISBN 978-1499140439

Ferdelji, Boris (2014) Projektiranje postrojenja za uparivanje jabučnog soka. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Halasz, Boris.

Filipović, Antonio (2014) Evaluation of ice induced loads on ships in compressive ice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.

Filo, Marko (2014) Analiza metode korelacijskog odlaganja materijala u skladištu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Flego, Filip (2014) Tehnološki postupci gradnje čeličnih marikulturnih objekata. = Production technology for steel mariculture objects. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Franin, Bruno (2014) Analiza direktive 97/68/EZ– emisije onečišćujućih tvari iz motora izvancestovnih mobilnih strojeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Franičević, Marin (2014) Sustav za upravljanje i nadzor izvršenih radova transportnih vozila. = System for managing and monitoring of completed works in transport vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Frančeski, Joško (2014) Numeričko modeliranje testa savijanja u tri točke. = Numerical modelling of Three - Point Bending Test. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Frančeski, Joško and Tonković, Zdenko and Skozrit, Ivica and Surjak, Martin and Krstulović-Opara, Lovre and Vesenjak, Matej and Kodvanj, Janoš and Domazet, Željko (2014) Validacija numeričkog modela primjenom metoda digitalne korelacije slike i termografije. = Validation of Numerical Model by Means of Digital Image Correlation and Thermography. In: 6. susret hrvatskog društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Fučić, Erna (2014) Zaštita zrakoplova od korozije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.

G

Galić, Helena (2014) Utjecaj dodatne mase na vibracije brodskog trupa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.

Galić, Ivan (2014) Konstrukcija naslona za glavu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2014) Analiza prijenosa metala pri MAG CBT zavarivanju. = Metal transfer analysis during MAG CBT welding. Zavarivanje, 57 (3/4). pp. 85-92. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2014) Analiza prijenosa metala pri MAG CBT zavarivanju. = Metal transfer analysis during MAG CBT welding. In: 40. Međunarodna konferencija HDTZ ZAVARIVANJE - WELDING 2014, Šibenik, Hrvatska.

Garašić, Ivica and Remenar, Maja and Kufrin, Tomislav (2014) Zavarivanje MIG/MAG promijenjivim polaritetom - posebnosti i primjena. = Variable polarity GMAW welding - specific issues and application. Zavarivanje, 57 (1/2). pp. 17-23. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Garbatov, Jordan and Jurišić, Paul and Parunov, Joško (2014) Comparative Analysis Based on Two Nonlinear Corrosion Models Commonly Used for the Prediction of Structural Degradation of Oil Tankers. = Comparative Analysis Based on Two Nonlinear Corrosion Models Commonly Used for the Prediction of Structural Degradation of Oil Tankers. Transactions of FAMENA, 38 (2). pp. 21-30. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 3.

Garbatov, Yordan Y. and Guedes Soares, Carlos and Parunov, Joško (2014) Fatigue strength experiments of corroded small scale steel specimens. = Fatigue strength experiments of corroded small scale steel specimens. International Journal of Fatigue, 59. pp. 137-144. ISSN 0142-1123. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Garbatov, Yordan Y. and Guedes Soares, Carlos and Parunov, Joško and Kodvanj, Janoš (2014) Tensile strength assessment of corroded small scale specimens. = Tensile strength assessment of corroded small scale specimens. Corrosion Science, 85. pp. 296-303. ISSN 0010-938X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.

Gatin, Inno (2014) Numerička simulacija opterećenja statičke strukture udarom vala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čorić, Većeslav.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2014) Primjena Naval Hydro Paketa za Proračun Valnih Opterećenja. = Application of the Naval Hydro Pack for Wave Loads Assessment. In: Šesti susret Hrvatskoga društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2014) Simulacija udarnih valnih opterećenja u OpenFOAM-u. = Simulation of Wave Impact Loads in OpenFOAM. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Gašparec, Luka (2014) Prikaz i analiza skladišnog sustava poduzeća. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Gašparović, Goran and Krajačić, Goran and Duić, Neven (2014) Sustainability of Cruise Ship Conference Tourism. = Sustainability of Cruise Ship Conference Tourism. In: The 9th Conference on Sustainable Development of Energy, Water and Environment Systems, 20-27.09.2014., Venecija, Italija.

Gašparović, Goran and Krajačić, Goran and Duić, Neven and Baotić, Mato (2014) New Energy Planning Software for Analysis of Island Energy Systems and Microgrid Operations - H2RES Software as a Tool to 100% Renewable Energy System. = New Energy Planning Software for Analysis of Island Energy Systems and Microgrid Operations - H2RES Software as a Tool to 100% Renewable Energy System. Computer Aided Chemical Engineering, 33. pp. 1855-1860. ISSN 1570-7946. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Gašparović, Goran and Prebeg, Pero and Krajačić, Goran and Duić, Neven (2014) Multi-objective Long-term Optimization of Energy Systems with High Share of Renewable Energy Resources. = Multi-objective Long-term Optimization of Energy Systems with High Share of Renewable Energy Resources. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, SEE SDEWES, Ohrid, 2014, 30.-04.07.2014., Ohrid, Makedonija.

Gašparović, Sven (2014) Stroj za rezanje sirove gume. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Gerhardinger, David (2014) Remontni postupak zračnoga kompresora AK 50T1. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Božić, Željko.

Geršić, Tomislav (2014) Kvantifikacija pojačivačkog efekta olovnih folija kod industrijske računalne radiografije. = Quantification of intensifying lead screens effect in industrial computed radiography. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Gessert, René (2014) Lijevanje prirubnice od nodularnog lijeva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Glogović, Zlatko and Kožuh, Zoran and Kralj, Slobodan (2014) Mathematical model for calculation of thickness of flame sprayed coating of aluminium on S235JR steel. = Mathematical model for calculation of thickness of flame sprayed coating of aluminium on S235JR steel. Materials Science and Technology (United Kingdom), 30 (6). pp. 676-687. ISSN 0267-0836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.

Glogović, Zlatko and Kožuh, Zoran and Kralj, Slobodan and Alar, Vesna and Stojanović, Ivan (2014) Properties of aluminium coatings produced using manual and robotized flame spraying processes. = Properties of aluminium coatings produced using manual and robotized flame spraying processes. International Journal of Materials Research, 105 (2). pp. 215-218. ISSN 1862-5282. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (1.6.2015.). Točan broj autora: 5.

Gložinić, Matija (2014) Projekt sustava ventilacije, grijanja i hlađenja proizvodne hale. = Design of ventilation, heating and cooling system for industrial plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Godec, Damir and Vidović, Ivan and Rujnić-Sokele, Maja (2014) Optimization of low budget 3D printing parameters. = Optimization of low budget 3D printing parameters. In: 5th International Conference on additive Technologies - iCAT 2014, 15-17.10.2014., Beč, Austrija.

Gojo, Miroslav and Baršić, Gorana and Grekulović, Vesna and Rajčić-Vujasinović, Mirjana and Stanković, Velizar (2014) Nickel-Tio2 composite coatings-surface characterization. = Nickel-Tio2 composite coatings-surface characterization. In: MATRIB 2014, 26. - 28. 06. 2014., Vela Luka, Htvatska.

Goran, Saša (2014) Model helikopterskog rotora zatvorene forme. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Gotovac, Danijel (2014) Rasklapanje perilice rublja pri popravcima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Grabić, Ante (2014) Primjena aluminijskih pjena u transportnoj industriji. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Gradečak, Tomislav (2014) Simulacijski model proizvodnog procesa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Gradinščak, Tomislav (2014) Numeričke simulacije stlačivih strujanja sa slobodnom površinom. = Numerical simulation of compressible free surface flows. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Grahovac, Predrag (2014) Optimizacija procesa proizvodnje opekarskih proizvoda. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Grbac, Alberto (2014) Karakterizacija materijala lista kružne pile. = Materials characterization of the circular saw blade. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Grdinić, Saša (2014) Granice isključivanja cilindara kao metode za smanjenje. = Limits of deactivation of cylinders as measures to reduce fuel consumption. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Grdić, Ivana (2014) Analiza stanja avionskog motora Textron Lycoming AEIO-360-A1B6. = Technical Analysis of Aircraft Engine Textron Lycoming AEIO-360-A1B6. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Grgec Bermanec, Lovorka and Zvizdić, Davor and Šimunović, Vedran (2014) Development of method for determination of pressure balance piston fall rate. = Development of method for determination of pressure balance piston fall rate. ACTA IMEKO The e-Journal of the International Measurement Confederation (IMEKO), 3 (2). pp. 44-47. ISSN 2221-870X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Grgić, Ivan (2014) Rashladne komore za skladištenje prehrambenih proizvoda na brodu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Grilec, Krešimir (2014) Inženjerstvo materijala na strojarskim fakultetima u RH. = Materials engineering on faculties of mechanical engineering in Republic of Croatia. In: Međunarodna stručna konferencija ME4CATALOGUE, Slavonski brod, Hrvatska.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Jakovljević, Suzana and Primorac, Ivan (2014) Erozijsko trošenje nanostrukturiranih sol - gel tio2 prevlaka na nehrđajućem čeliku. = In: 40th International conference Welding 2014, 28-31.05.2014., Šibenik.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Jakovljević, Suzana and Rede, Vera (2014) Particle erosion of sol - gel TiO2 - ZrO2 films. = Particle erosion of sol - gel TiO2 - ZrO2 films. In: 4th international conference Mechanical technologies and structural materials, 25.-26.09.2014., Split, Hrvatska.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Jakovljević, Suzana and Rede, Vera (2014) Sliding wear of TiO2 sol - gel coating. = Sliding wear of TiO2 sol - gel coating. In: 18th international research/expert conference "Trends in the development of machinery and associated technology" TMT 2014, 10.-12.09.2014., Budimpešta, Mađarska.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Primorac, Ivan (2014) Nanošenje TiO2 sol-gel prevlaka na nehrđajući čelik. = Deposition of sol-gel TiO2 coatings on stainless steel. In: International Foundrymen Conference, Development and Optimization of the Castings Production Processes (14 ; 2014), 15.-16.05.2014., Opatija, Hrvatska.

Grlić, Ilija (2014) Škarasta dizalica. = Electrical scissor lift. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Grubešić, Nikola (2014) Karakterizacija procesa uporabom metode regresijske analize i analize varijance. = Process characterisation using ANOVA and regresion analysis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Grubišić, Vjekoslav (2014) Analiza stabiliteta i opterećenja tankera u oštećenom stanju. = Analysis stability and loads of the tanker in damaged condition. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Slapničar, Vedran.

Grzelj, Vedran (2014) Konstrukcija ozubljenog valnog prijenosnika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Guzović, Zvonimir and Rašković, Predrag and Blatarić, Zoran (2014) The comparision of a basic and a dual-pressure ORC (Organic Rankine Cycle): Geothermal Power Plant Velika Ciglena case study. = The comparision of a basic and a dual-pressure ORC (Organic Rankine Cycle): Geothermal Power Plant Velika Ciglena case study. Energy, 76. pp. 75-186. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Górski, Piotr and Pospíšil, Stanislav and Kuznetsov, Sergeii and Tatara, Marcin and Marušić, Ante (2014) Investigation of Strouhal number of iced cable model of cable-supported bridges with respect to angle of wind attack. = Investigation of Strouhal number of iced cable model of cable-supported bridges with respect to angle of wind attack. In: 7th International symposium on environmental effects on building and people. Actions, influences, interactions, discomfort, 20-22.10.2014., Krakow, Poljska.

H

Habulan, Marino (2014) Nanošenje sol-gel ZrO2 filmova na nehrđajući čelik. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Hadžistević, Miodrag and Matin, Ivan and Hodolić, Janko and Vukelić, Đorđe and Vukmirović, Srdjan and Godec, Damir and Nedić, Bogdan (2014) Rule base reasoning in the knowledge - based mould design system. = Rule base reasoning in the knowledge - based mould design system. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 21 (5). pp. 1143-1148. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.

Hadžić, Neven (2014) Suvremene konstrukcije i oprema za marikulturu. = Modern mariculture structures and equipment. In: Morska tehnologija (offshore technology) - perspektivno područje za Republiku Hrvatsku, Zagreb, Hrvatska.

Hadžić, Neven and Tomić, Marko and Senjanović, Ivo (2014) Harmonic loading of horizontal axis tidal turbines due to non-uniform stream profile. = Harmonic loading of horizontal axis tidal turbines due to non-uniform stream profile. Ocean Engineering, 91. pp. 196-207. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Hadžić, Neven and Tomić, Marko and Senjanović, Ivo and Vladimir, Nikola (2014) Pregled pučinskih obnovljivih izvora energije. = An overview of offshore renewable energy resources. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Hajdarović, Perica (2014) Uređaj za mjerenje zakretnog momenta pri poprečnom rezanju. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Hajdu, Ivan (2014) Reparaturno zavarivanje u održavanju strojarskih komponenti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Halusek, Hrvoje (2014) Analiza EU direktiva i ece pravilnika o električnom pogonu kao i o pogonu vozila na vodik. = Analysis of the EU directives and ECE regulations for the electric drive vehicles and hydrogen powered motor vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Hermanović, Hrvoje (2014) Izrada projektne dokumentacije rekonstrukcije kondenzatorskog kruga amonijačnog rashladnog postrojenja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.

Hermans, Ralph M. and Lazar, Mircea and Jokić, Andrej (2014) Stabilization of interconnected dynamical systems by online convex optimization. = Stabilization of interconnected dynamical systems by online convex optimization. International Journal of Robust and Nonlinear Control, 24 (10). pp. 1467-1487. ISSN 1049-8923. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Hećimović, Maja (2014) Studija utjecaja modeliranja konstrukcije napadne ivice krila na strukturni odziv konstrukcije "morphing" krila. = Study of the morphing leading edge on the whole wing structural characteristics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žanić, Vedran.

Hirdaris, Spyros and Argiryiadis, Kimon and Bai, Wei and Dessi, Daniele and Ergin, Ahmet and Fonseca, Nuno and Gu, Xuekang and Hermundstad Ole, A. and Huijsmans, Rene and Iijima, Kazuhiro and Nielsen, Ulrik D. and Papanikolau, Apostolos and Parunov, Joško and Incecik, Atila (2014) Loads for use in the design of ships and offshore structures. = Loads for use in the design of ships and offshore structures. Ocean engineering, 78. pp. 131-174. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 14.

Hlušička, Alex (2014) Ispitivanje etalonskih mjerila vlažnosti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Hodak, Valentino (2014) DSM konstrukcijskih parametara. = Design Parameters DSM. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Hoić, Matija and Kranjčević, Nenad and Deur, Joško (2014) Experimental characterization of dry dual clutch elastic components with application to clutch modelling. = Experimental characterization of dry dual clutch elastic components with application to clutch modelling. In: Powertrain Modelling and Control Conference, PMC 2014, 10-12.09.2014., Bradford, Ujedinjeno Kraljevstvo.

Hoić, Matija and Kranjčević, Nenad and Herold, Zvonko and Deur, Joško and Ivanović, Vladimir (2014) Experimental characterization and modeling of dry dual clutch wear. = Experimental characterization and modeling of dry dual clutch wear. SAE International Journal of Passenger Cars - Mechanical Systems, 7 (1). pp. 326-337. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Horina, Alen (2014) Trigeneracijsko postrojenje sa Strilingovim motorom pogonjeno biogorivima. = Stirling engine trigeneration fuelled by biofuels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.

Horvat, Ivan (2014) Dinamička simulacija potrošnje primarne energije u stambenoj zgradi. = Dynamic simulation of primary energy consumption in residential building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Horvat, Josip (2014) Robotsko dvoručno sklapanje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Horvat, Lovro (2014) Optimization of E-Coating Simulations in Automotive Painting Processes. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Horvat, Matija (2014) Dinamička analiza rastojnika-prigušivača tipa "diamond". = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Horvat, Nino (2014) Analiza stabilnosti stupa vjetroagregata. = Stability Analysis of Wind Turbine Tower. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Horvat, Silvestar (2014) Simulacija unutarnjeg transporta u tvornici kabela. = Simulation of internal transport in the cable factory. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Horvat, Tomislav (2014) Analiza toplinskih karakteristika podnih konvektora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Horvatin, Dario (2014) Ispitivanje karakteristika alkoholne kupke za niskotemperaturni generator vlažnosti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Hranj, Nataša (2014) Automatsko upravljanje ultrafiltracijskim uređajem. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.

Hren, Ivan (2014) Utjecaj načina gašenja dubokog hlađenja na popuštanje čelika K490 Microclean. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Hrgetić, Mario and Deur, Joško and Ivanović, Vladimir and Tseng, Eric (2014) Vehicle Sideslip Angle EKF Estimator based on Nonlinear Vehicle Dynamics Model and Stochastic Tire Forces Modeling. = Vehicle Sideslip Angle EKF Estimator based on Nonlinear Vehicle Dynamics Model and Stochastic Tire Forces Modeling. SAE International Journal of Passenger Cars- Mechanical Systems, 7 (1). pp. 86-95. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Hršak, Dario (2014) Zaštita nehrđajućeg čelika anodnom polarizacijom. = Protection of stainless steel with anodic polarization. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Hršak, Elvis (2014) Trošenje alata pri bušenju kamena. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Hubak, Andro (2014) Uređaj za eksperimentalno određivanje momenata tromosti trkaćeg automobila Formula student. = Inertia Measuring Machine for Formula Student Racing Car. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Hublin, Andrea and Schneider, Daniel Rolph and Džodan, Janko (2014) Utilization of biogas produced by anaerobic digestion of agro-industrial waste: Energy, economic and environmental effects. = Utilization of biogas produced by anaerobic digestion of agro-industrial waste: Energy, economic and environmental effects. Waste Management and Research, 32 (7). pp. 626-633. ISSN 0734-242X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

I

Iličić, Bojan (2014) Utjecajni parametri pri vizualnom uočavanju indikacija. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Im, Hong-Il and Malenica, Šime and Vladimir, Nikola and Choi, Byung-Ki and Jung, Byoung-Hoon and Cho, Dae Seung (2014) Hydroelastic vibratory response of ultra large container ships. = Hydroelastic vibratory response of ultra large container ships. In: The Annual Autumn Conference The Society of Naval Architects of Korea, 06-07.11.2014., Changwon, Južna Koreja.

Ivandija, Matija (2014) Projektiranje komunalne hidraulike za primjenu na vozilima. = Design of communal hydraulicsfor vehicle application. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.

Ivandić, Viktorija (2014) Tehnike uštede skladišnog prostora. = Techniques to save warehouse space. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Ivančević, Darko and Smojver, Ivica (2014) Micromechanical damage modelling using a two-scale method for laminated composite structures. = Micromechanical damage modelling using a two-scale method for laminated composite structures. Composite Structures, 108 (1). pp. 223-233. ISSN 0263-8223. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (25.5.2015.). Točan broj autora: 2.

Ivančević, Darko and Smojver, Ivica (2014) Micromechanical failure modelling of composite materials using HFGMC. = Micromechanical failure modelling of composite materials using HFGMC. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Ivančić, Ante (2014) Tehnike klasteriranja pomoću teorije grafova. = Clustering techniques using graph theory. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Ivković, Josip (2014) Izrada alata za školjkasti lijev. = Tool production for shell-mold casting. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Ivušić, Franjo and Franz, Mladen and Španiček, Đurđica and Ćurković, Lidija (2014) Materijali I , Novo izmjenjeno izdanje. = Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-28-0 (Unpublished)

Ivušić, Franjo and Lahodny-Šarc, Olga and Stojanović, Ivan (2014) Corrosion inhibition of carbon steel in saline solutions by gluconate, zinc sulphate and clay eluate. = Corrosion inhibition of carbon steel in saline solutions by gluconate, zinc sulphate and clay eluate. Tehnički vjesnik, 21 (1). pp. 107-114. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Ivušić, Franjo and Šarc-Lahodny, Olga and Otmačić Ćurković, Helena and Alar, Vesna and Stojanović, Ivan (2014) Environmentally friendly inhibitors of carbon steel corrosion in chloride environments. = Environmentally friendly inhibitors of carbon steel corrosion in chloride environments. In: 21th Conference of materials protection and industrial finish, 10.04.2014., Zagreb, Hrvatska.

Ivšac, Danijel (2014) Usporedba 3D mjernih postupaka u kontroli kvalitete. = The comparison of 3D measurement procedures in quality control. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Išek, Ivan (2014) Proračun snage vjetro-elektrane. = Wind turbine power calculation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

J

Jagarčec, Monika (2014) Samostojeći podizni stup. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Jagarčec, Tomislav (2014) Optimiranje i standardizacija nosača konzervatora energetskih transformatora. = Optimization and standardization of conservator construction and power transformers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Jakovljević, Suzana (2014) Laboratorijske metode ispitivanja kliznog i abrazijskog trošenja. = The laboratory test method of sliding and abrasion wear of materials. In: International conferance MATRIB 2014, 26-28.06.2014., Vela Luka ; Korčula ; Hrvatska.

Jakšetić, Julije and Pečarić, Josip and Perušić, Anamarija (2014) Steffensen inequality, higher order convexity and exponential convexity. = Steffensen inequality, higher order convexity and exponential convexity. Rendiconti del Circolo Matematico di Palermo, 63 (1). pp. 109-127. ISSN 0009-725X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Jakšetić, Julije and Pečarić, Josip and Perušić Pribanić, Anamarija (2014) Generalization of Steffensen's inequality by Hermite polynomial. = Generalization of Steffensen's inequality by Hermite polynomial. Matematički bilten, 38 (2). pp. 53-68. ISSN 0351-336X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Jakšetić, Julije and Roqia, Gulam and Pečarić, Josip (2014) Extension of Stolarsky means by Euler-Radau expansions. = Extension of Stolarsky means by Euler-Radau expansions. Advances in Inequalities and Applications, 2014. pp. 7-1. ISSN 2050-7461. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Jakšić, Tomislav (2014) Dinamičko rukovanje predmetima rada na pokretnoj traci. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2014) Bezmrežna numerička kolokacijska metoda za modeliranje heterogenih materijala. = Meshless collocation method for modeling of heterogeneous materials. In: Šesti susret Hrvatskog društva za mehaniku, 29.-30.5.2014., Rijeka, Hrvatska.

Jalžabetić, Nikola (2014) Kontekstulna interpretacija okoline vizijskim sustavom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Janković, Ivan (2014) Upravljanje robotom android aplikacijom. = Android application controlled robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Jantol, Sandra (2014) Opetovana upotreba etalaona za provjeru penetrantskih sustava. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Jasak, Hrvoje and Gatin, Inno and Vukčević, Vuko (2014) Numerical simulation of wave loading on static offshore structures. = Numerical simulation of wave loading on static offshore structures. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Jasak, Hrvoje and Rigler, Damir and Tuković, Željko (2014) Design and implementation of Immersed Boundary Method with discrete forcing approach for boundary conditions. = Design and implementation of Immersed Boundary Method with discrete forcing approach for boundary conditions. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Jasak, Hrvoje and Vukčević, Vuko and Christ, Dominik (2014) Rapid Free Surface Simulation for Steady-State Hull Resistance with FVM using OpenFOAM. = Rapid Free Surface Simulation for Steady-State Hull Resistance with FVM using OpenFOAM. In: 30 Symposium on Naval Hydrodynamics, 2-7.11.2014., Hobart, Tasmanija.

Jelić, Ivan (2014) Projekt grijanja stambeno-poslovne zgrade. = Design of heating system for residential and office building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Jerbić, Bojan and Šuligoj, Filip and Švaco, Marko and Šekoranja, Bojan (2014) Robot Assisted 3D Point Cloud Object Registration. = Robot Assisted 3D Point Cloud Object Registration. In: 25th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2014, 26-29.11.2014., Beč, Austria.

Jerković, Pavao (2014) Izrada energetskog certifikata višestambene zgrade. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Jokić, Denis (2014) Razrada postupka umjeravanja koincidentnih libela. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Jozić, Vjekoslav (2014) Trošenje rezne pločice pri tokarenju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Juraga, Ivan and Alar, Vesna and Stojanović, Ivan (2014) Korozija i zaštita premazima. = Corrosion and coatings. Korozija i zaštita premazima. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3. (Unpublished)

Juraga, Ivan and Alar, Vesna and Šimunović, Vinko and Stojanović, Ivan (2014) Utjecaj naknadne kemijske obrade površine nehrđajućih čelika na korozijsku otpornost. = Influence of chemichal surface treatment of stainless steel on corrosion resistance. In: 40. Međunarodno savjetovanje "Zavarivanje - Welding 2014", 28-31.05.2014., Šibenik, Hrvatska.

Juraga, Ivan and Ljubenkov, Boris and Stojanović, Ivan (2014) Experimental research of the duplex stainless steel welds in shipbuilding. = Experimental research of the duplex stainless steel welds in shipbuilding. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 65 (2). pp. 73-85. ISSN 0007-215X. . .

Juraga, Ivan and Šimunović, Vinko and Stojanović, Ivan (2014) Utjecaj odabira materijala i tehnologije zavarivanja na pojavu korozijskih oštećenja nehrđajućih čelika u postrojenju za desalinizaciju. = Influence of materials selection and welding technology on the corrosion damages of stainless steels in desalination plant. In: 21. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2014", 10.04.2014., Zagreb, Hrvatska.

Juraga, Ivan and Šimunović, Vinko and Stojanović, Ivan and Blažević, Ivica (2014) Utvrđivanje uzroka oštećivanja cjevovoda od nehrđajućih čelika u postrojenju za desalinizaciju. = Failure analysis of stainless steel pipelines in desalinization plant. In: V. Savjetovanje o morskoj tehnologiji - in memorian akademinku Zlatku Winkleru, 22-23.11.2013., Rijeka, Hrvatska.

Juranić, Jasmin (2014) Manipulatorska ruka s vodenim topom i mehaničkom hvataljkom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Jurić, Ivan (2014) MIG zavarivanje aluminijskih legura. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Jurišić, Paul and Parunov, Joško (2014) Granična čvrstoća trupa korodiranih naftnih tankera. = Hull girder ultimate strength of aging oil tankers. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Jurčević, Marjan (2014) Automatizirani visokoregalni skladišni sustav s regalima dvostruke dubine i dizalicom s dvije prihvatne stanice. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

K

Kanižaj, Roberto (2014) Projekt sustava klimatizacije, grijanja i hlađenja poslovne zgrade. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Kanjir, Petra (2014) Prikaz logistike proizvodnje poduzeća Elektro Kontakt. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Kapo, Faruk (2014) Određivanje položaja središta zgloba kuka tijekom gibanja čovjeka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Karaga, Ivan (2014) Značajke TIG zavarivanja impulsnim strujama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Karlović, Sven and Bosiljkov, Tomislav and Brnčić, Mladen and Semenski, Damir and Dujmić, Filip and Tripalo, Branko and Ježek, Damir (2014) Reducing fat globules particle-size in goat milk: Ultrasound and high hydrostatic pressures approach. = Reducing fat globules particle-size in goat milk: Ultrasound and high hydrostatic pressures approach. Chemical and Biochemical Engineering Quarterly, 28 (4). pp. 499-507. ISSN 0352-9568. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 7.

Kasalo, Marko (2014) Kinematička i kinetička analiza mehanizama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stegić, Milenko.

Kasać, Josip and Milić, Vladimir and Stepanić, Josip and Mester, Gyula (2014) A Computational Approach to Parameter Identification of Spatially Distributed Nonlinear Systems with Unknown Initial Conditions. = A Computational Approach to Parameter Identification of Spatially Distributed Nonlinear Systems with Unknown Initial Conditions. In: IEEE Symposium Series on Computational Intelligence, 9-12.12.2014., Orlando, SAD.

Katalinić, Marko and Parunov, Joško (2014) Pregled klimatskih prilika u Jadranskom moru. = Review of climatic conditions in the Adriatic Sea. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Katić, Marko and Mudronja, Vedran and Šimunović, Vedran (2014) Realization of the highest level of traceability in Croatian National Laboratory for Length. = Realization of the highest level of traceability in Croatian National Laboratory for Length. Transactions of FAMENA, 38 (1). pp. 37-44. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Katić, Višnja and Otmačić Ćurković, Helena and Semenski, Damir and Baršić, Gorana and Marušić, Katarina and Špalj, Stjepan (2014) Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires. = Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires. Angle Orthodontist, 84 (6). pp. 1041-1048. ISSN 0003-3219. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 6.

Katić, Višnja and Ćurković, Lidija and Ujević Bošnjak, Magdalena and Špalj, Stjepan (2014) Determination of corrosion rate of orthodontic wires based on nickel-titanium alloy in artificial saliva. = Determination of corrosion rate of orthodontic wires based on nickel-titanium alloy in artificial saliva. Materialwissenschaft und Werkstofftechnik, 45 (2). pp. 99-105. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.

Katić, Višnja and Špalj, Stjepan and Leder Horina, Jasna and Vikić-Topić, Dražen (2014) Impact of fluoride agents on mechanical properties of orthodontic wires. = Impact of fluoride agents on mechanical properties of orthodontic wires. In: 2nd International Conference on Biodental Engineering, BIODENTAL 2012, 07-08.12.2012., Porto; Portugal.

Katić, Višnja and Špalj, Stjepan and Opalić, Milan and Domitran, Zoran (2014) Design of orthodontic mini-implants contributing to implantation torque. = Design of orthodontic mini-implants contributing to implantation torque. In: 2nd International Conference on Biodental Engineering, BIODENTAL 2012, 07-08.12.2012., Porto; Portugal.

Katičić, Ljiljana and Lisjak, Dragutin and Dulčić, Želimir (2014) Asset governance as strategy for physical asset. = Asset governance as strategy for physical asset. In: 7th International Conference of the School of Economics and Business Conference Proceedings, 13.-14.09.2014., Sarajevo, Bosna i Hercegovina.

Katičić, Ljiljana and Lisjak, Dragutin and Dulčić, Želimir (2014) Asset governance in Croatia. = Asset governance in Croatia. In: Euromaintenance 2014., 05.-08.05.2014., Helsinki, Finska.

Katulić, Stjepko and Čehil, Mislav and Bogdan, Željko (2014) A novel method for finding the optimal heat storage tank capacity for a cogeneration power plant. = A novel method for finding the optimal heat storage tank capacity for a cogeneration power plant. Applied Thermal Engineering, 65 (1-2). pp. 530-538. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Kereković, Snježana (2014) Book Review: Tokić, B., Stepanić, J., English - Croatian Dictionary of Engineering Terminology with Special Reference to Engine and Motor Vehicle Terms. = Book Review: Tokić, B., Stepanić, J., English - Croatian Dictionary of Engineering Terminology with Special Reference to Engine and Motor Vehicle Terms. Transactions of FAMENA, 38 (1). pp. 97-98. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Kereković, Snježana (2014) Primjena terminoloških načela na sinonimne tehničke nazive. = The application of terminological principles to synonymous engineering terms. Polimeri : časopis za plastiku i gumu, 1-2/14. pp. 18-24. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Kereković, Snježana (2014) Strojarsko nazivlje u Klaićevim rječnicima stranih riječi. = Technical terms in the dictionaries of foreign words by A. B. Klaić. Rasprave: Časopis Instituta za hrvatski jezik i jezikoslovlje, 40 (2). pp. 327-347. ISSN 1331-6745. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Kerolli-Mustafa, Mihone and Ćurković, Lidija and Holjevac- Grgurić, Tamara and Šipušić, Juraj (2014) Characterization of open-dumped jarosite waste at mitrovica industrial park, kosovo. = Characterization of open - dumped jarosite waste at mitrovica industrial park , kosovo. In: 14th International Foundrymen Conference, Development and Optimization of the Castings Production Processes, 15-16.05.2014., Opatija, Hrvatska.

Kerolli–Mustafa, Mihone and Fajković, Hana and Rončević, Sanda and Ćurković, Lidija (2014) Assessment of metals risks from different depths of jarosite tailing waste of Trepça Zinc Industry , Kosovo based on BCR procedure. = Assessment of metals risks from different depths of jarosite tailing waste of Trepça Zinc Industry , Kosovo based on BCR procedure. Journal of geochemical exploration, 148. pp. 161-168. ISSN 0375-6742. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Keser, Robert (2014) Simulacija prijelaznih pogonskih režima isparivača organskog fluida. = Transient operating regimes simulation of organic fluid evaporator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Kirić, Nikola (2014) Primjena standardnog robotskog operativnog sustava - ROS. = Applying a standard robotic operating system - ROS. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Kitarović, Stanislav (2014) Nonlinear Euler-Bernoulli beam kinematics in progressive collapse analysis based on the Smith's approach. = Nonlinear Euler-Bernoulli beam kinematics in progressive collapse analysis based on the Smith's approach. Marine Structures, 39. pp. 118-130. ISSN 0951-8339. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 1.

Kitarović, Stanislav and Andrić, Jerolim and Pirić, Karlo and Mikulić, Antonio (2014) Mogućnosti povećanja smične nosivosti ploča u analizi i sintezi brodskih konstrukcija. = Magnification of the plate shear load capacity in analysis and synthesis of the ship structures. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Kitarović, Stanislav and Žanić, Vedran (2014) Approximate approach to progressive collapse analysis of the monotonous thin-walled structures in vertical bending. = Approximate approach to progressive collapse analysis of the monotonous thin-walled structures in vertical bending. Marine Structures, 39. pp. 255-286. ISSN 0951-8339. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 2.

Kišić, Daniel (2014) Uređaj za zavarivanje spremnika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.

Kišić, David (2014) Numeričko određivanje mehaničke mobilnosti rastojnika-prigušivača tipa ,,diamond". = Numerical Determination of Diamond Spacer-damper Mechanical Mobility. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Klaić, Miho and Staroveški, Tomislav and Udiljak, Toma (2014) Tool wear classification using decision trees in stone drilling applications: A preliminary study. = Tool wear classification using decision trees in stone drilling applications: A preliminary study. In: 2013 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 23-26.10.2013., Zadar; Croatia.

Klisarić, Vedran (2014) Idejni projekt strojarnice broda za prijevoz rasutih tereta. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šestan, Ante.

Kliček, Filip (2014) Leptirasti ventil DN1200 PN16. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Kljajić, Zorica (2014) Adaptivna aktivacijska funkcija u skrivenom sloju neuronske mreže. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Klobčar, Damjan and Tušek, Janez and Bizjak, Milan and Bušić, Matija and Lešer, Vladka (2014) Micro friction stir welding of copper electrical contacts. = Micro friction stir welding of copper electrical contacts. In: Zavarivanje - Welding 2014, 28-31.05.2014., Šibenik, Solaris, Hrvatska.

Klobčar, Damjan and Tušek, Janez and Nagode, Aleš and Bušić, Matija and Lešer, Vladka (2014) Comparison of joint strength produced by fsw, fssw and a novel technique friction stir linear spot welding. = Comparison of joint strength produced by fsw, fssw and a novel technique friction stir linear spot welding. In: Zavarivanje - Welding 2014, 28-31.05.2014., Šibenik, Solaris, Hrvatska.

Kokić, Mia (2014) Upravljanje ponašanjem robota u ovisnosti o stanju okoline. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Kolarek, Vedran (2014) Izrada uređaja za utvrđivanje trošenja obloga kočnica. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Kolednjak, Davor (2014) Utjecaj parametara zavarivanja na strukutru i svojstva čelika API 5L X80. = Influence of welding parameters on structure and properties of API 5L X80 steel. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Kolinger, Danijel (2014) Implementacija vitkog menadžmenta u proizvodnom poduzeću. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Komin, Matija (2014) Navarivanje izmjenjivača topline visokolegirani čelikom AISI 410. = Cladding of heat exchanger with high alloyed steel AISI 410. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Korade, Ivan and Virag, Zdravko and Krizmanić, Severino (2014) Procjena mogućnosti mjerenja lokalnih parametara viskoelastične arterijske stijenke. = Assessing the possibilities of measuring local viscoelastic parameters of the arterial wall. In: 6. susret Hrvatskog društva za mehaniku, 29-30. 05. 2014., Rijeka, Hrvatska.

Korade, Ivan and Virag, Zdravko and Šavar, Mario (2014) Numerical simulation of one-dimensional flow in elastic and viscoelastic branching tube. = Numerical simulation of one-dimensional flow in elastic and viscoelastic branching tube. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Korade, Tomislav (2014) Vodna turbina za malu hidroelektranu. = Water turbine for small hydro power plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir and Tuković, Željko.

Korbar, Radoslav and Virag, Zdravko and Šavar, Mario (2014) Efficient solution method for quasi two-dimensional model of water hammer. = Efficient solution method for quasi two-dimensional model of water hammer. Journal of Hydraulic Research, 52 (4). pp. 575-579. ISSN 0022-1686. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Korbar, Radoslav and Virag, Zdravko and Šavar, Mario (2014) Truncated method of characteristics for quasi-two-dimensional water hammer model. = Truncated method of characteristics for quasi-two-dimensional water hammer model. Journal of Hydraulic Engineering, 140 (6). ISSN 0733-9429. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Koren, Petar (2014) Dvoosni sustav za praćenje objekata. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Korošić, Saša (2014) Transporter za teško pristupačne terene. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Kos, Hrvoje (2014) Zavarljivost aluminijske legure AW 6082. = Weldability of AW 6082 aluminum alloy. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Kos, Tomislav (2014) Toplinska analiza taljevine nodularnog lijeva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Kosir, David (2014) Specifičnosti razvoja informacijskih sustava prema zahtjevima korisnika. = Specifics of development of information systems according to customer requirements. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Kovarik, Borna (2014) Sekvencijalni mjenjač. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Kovač, Andrea (2014) Zaštita podvodnog dijela brodskog trupa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žiha, Kalman.

Kovačić, Marin and Ašperger, Danijela and Ćurković, Lidija (2014) 3in1 - photocolorimeter , turbidimeter and nephelometer ( 3in1 - ptn ). = 3in1 - photocolorimeter , turbidimeter and nephelometer ( 3in1 - ptn ). In: International conference on materials, trybology, recycling, MATRIB 2014, 26-28.06.2014., Vela Luka.

Kovačićek, Nikola (2014) Prikaz i analiza skladišnog sustava poduzeća Feroterm. = Review and analysis of warehouse system of Feroterm company. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Kozarac, Darko and Vuilleumier, David and Saxena, Samveg and Dibble, Robert W. (2014) Analysis of benefits of using internal exhaust gas recirculation in biogas-fueled HCCI engines. = Analysis of benefits of using internal exhaust gas recirculation in biogas-fueled HCCI engines. Energy Conversion and Management, 87. pp. 1186-1194. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.

Kozmar, Hrvoje and Allori, Davide and Marino, Enzo and Bartoli, Gianni and Borri, Claudio (2014) Wake characteristics of an offshore wind turbine in the vicinity of a coastal mountain. = Wake characteristics of an offshore wind turbine in the vicinity of a coastal mountain. In: XIII Conference of the Italian Association for Wind Engineering, 22.-25.06.2014., Genova, Italija.

Kozmar, Hrvoje and Hadžić, Neven and Tomić, Marko (2014) Offshore renewable energy in the Adriatic Sea with respect to the Croatian 2020 energy strategy. = Offshore renewable energy in the Adriatic Sea with respect to the Croatian 2020 energy strategy. Renewable and Sustainable Energy Reviews, 40. pp. 597-607. ISSN 1364-0321. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Kozmar, Hrvoje and Juretić, Franjo (2014) Computational modeling of the atmospheric boundary layer using various two-equation turbulence models. = Computational modeling of the atmospheric boundary layer using various two-equation turbulence models. Wind and Structures, An International Journal, 19 (6). pp. 687-708. ISSN 1226-6116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 2.

Kozmar, Hrvoje and Lepri, Petra and Večenaj, Željko and Grisogono, Branko (2014) Velocity profile of the gusty Bora wind. = Velocity profile of the gusty Bora wind. In: XIII Conference of the Italian Association for Wind Engineering, 22.-25.06.2014., Genova, Italija.

Kozmar, Hrvoje and Lepri, Petra and Večenaj, Željko and Grisogono, Branko (2014) A summertime near-ground velocity profile of the Bora wind. = A summertime near-ground velocity profile of the Bora wind. Wind and Structures, An International Journal, 19 (5). pp. 505-522. ISSN 1226-6116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 4.

Kozmar, Hrvoje and Liščić, Božidar and Senjanović, Ivo and Čorić, Većeslav and Tomić, Marko and Hadžić, Neven (2014) Off shore Wind Power Plant in the Adriatic Sea: An Opportunity for the Croatian Economy. = Off shore Wind Power Plant in the Adriatic Sea: An Opportunity for the Croatian Economy. Transactions on maritime science, 2. pp. 103-110. ISSN 1848-3305. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

Kozmar, Hrvoje and Procino, Lorenzo and Borsani, Alessandra and Bartoli, Gianni (2014) Optimizing height and porosity of roadway wind barriers for viaducts and bridges. = Optimizing height and porosity of roadway wind barriers for viaducts and bridges. Engineering Structures, 81. pp. 49-61. ISSN 0141-0296. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.

Kralj, Slobodan and Bušić, Matija and Kožuh, Zoran and Klobčar, Damjan (2014) Utjecaj oblika i dimenzija alata pri zavarivanju trenjem rotirajućim alatom. = Influence of tool design and dimensions in the friction stir welding. In: Zavarivanje - Welding 2014, Šibenik, Solaris, Hrvatska.

Kram, Mateja (2014) Upravljanje vitkim i zelenim lancem opskrbe. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Kram, Mateja and Tošanović, Nataša and Hegedić, Miro (2014) Kaizen approach to supply chain management: First step for transforming supply chain into lean supply chain. = Kaizen approach to supply chain management: First step for transforming supply chain into lean supply chain. In: 12th International Conference on Industrial Logistics, ICIL 2014, 11-13.06.2014, Bol, Brač; Croatia.

Krezić, Ivo (2014) Projekt sustava klimatizacije, grijanja i hlađenja industrijske hale. = Design of air-conditioning, heating and cooling system for industrial plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Krijan, Ljubo (2014) Tribološka svojstva drveta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Krizmanić, Severino and Virag, Zdravko and Šavar, Mario (2014) A rapidly convergent algorithm for the solution of Navier-Stokes equations. = A rapidly convergent algorithm for the solution of Navier-Stokes equations. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Krleža, Vjekoslav (2014) Regulacija sile hidrauličke preše pomoću industrijskog PLC uređaja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Krstić Vukelja, Elizabeta and Runje, Biserka (2014) Quality service evaluation through the system of complaints and praise. = Quality service evaluation through the system of complaints and praise. Interdisciplinary description of complex systems, 12 (1). pp. 78-91. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Krznar, Nino (2014) Razvoj i izrada polimernog proizvoda - poklopac pametnog telefona s pomoću taložnog očvršćivanja. = Development and manufacturing of polymer product - cover for smart phone with fused deposition modeling. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Kuš, Igor (2014) Smartcity sustav za praćenje udobnosti vožnje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Kužnar, Saša (2014) Biomehanička analiza pločica na zaključavanje za prijelome distalnog radijusa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Kveštak, Nikola (2014) Vruće pocinćavanje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

L

Lacković, Luka (2014) Numeričko modeliranje rasta pukotine. = Numerical modelling of crack growth. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko and Ožbolt, Joško.

Ladika, Juraj (2014) Simulacija pogona ORC postrojenja snage 125 kW. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Landek, Darko and Cajner, Franjo and Rafael, Hrvoje and Ćavar, Antonio (2014) Effect of Application of Deep - cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC. = Effect of Application of Deep - cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 9-11.04.2014., Ljubljana, Slovenija.

Landek, Darko and Lisjak, Dragutin and Lübben, Thomas and Župan, Josip (2014) Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling. = Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling. Materials Performance and Characterization, 3 (4). pp. 99-117. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Župan, Josip (2014) Selection of optimal conditions for immersion quenching. = Selection of optimal conditions for immersion quenching. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Landek, Darko and Župan, Josip and Filetin, Tomislav (2014) A Prediction of Quenching Parameters Using Inverse Analysis. = A Prediction of Quenching Parameters Using Inverse Analysis. Materials Performance and Characterization, 3 (4). ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Latin Ivezić, Valentina (2014) Virtualizacija laboratorijske opreme. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Lažeta, Zvonimir (2014) Vođenje pokretne hidrauličke platforme. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.

Legutko, Stanislaw and Lyczko, Kazimierz and Słonina, Lukasz and Šercer, Mladen (2014) Computer-aided design of embossing taps. = Computer-aided design of embossing taps. Transactions of FAMENA, 38 (3). pp. 81-94. ISSN 1333-1124. . .

Lekšić, Ivan (2014) Primjena SMED metode pri izmjeni alata. = Application of SMED method for tools change over process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Leljak, Borna (2014) Automatsko umetanje i orijentiranje komponenti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Leljak, Zvonimir (2014) Projektiranje automatizirane naprave za savijanje drvenih brodskih konstrukcija. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Lepoša, Leon and Boban, Luka and Soldo, Vladimir (2014) Određivanje toplinskih svojstava tla primjenom optičkih kabela. = Determination of ground thermal properties with fiber optic cables application. In: 11. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja, 12-14.11.2014., Rovinj, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2014) Boundary conditions in a multiscale homogenization procedure. = Boundary conditions in a multiscale homogenization procedure. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2014) C1 continuity finite element formulation in second-order computational homogenization scheme. = C1 continuity finite element formulation in second-order computational homogenization scheme. Journal of Multiscale Modelling, 1 (1). pp. 11-19. ISSN 1756-9737. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2014) Poopćeni rubni uvjeti periodičnosti u računalnoj homogenizaciji drugog reda. = Generalized periodic boundary conditions in second-order computational homogenization. In: Šesti susret hrvatskog društva za mehaniku, 29-30. 05. 2014., Rijeka, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2014) A second-order two-scale homogenization procedure using C1 macrolevel discretization. = A second-order two-scale homogenization procedure using C1 macrolevel discretization. Computational Mechanics, 54 (2). pp. 425-441. ISSN 0178-7675. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Levačić, Lidija (2014) Kvantitativna dubinska profilna analiza sol-gel TiO2-ZrO2 filmova na nehrđajućem čeliku. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Liović, Ante (2014) Traktorski viličar za izmjenu sklopova na kombajnu. = Tractor mounted fork lift for combine harvester servicing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Liščić, Božidar and Filetin, Tomislav and Landek, Darko and Župan, Josip (2014) Current Investigations at Quenching Research Centre. = Current Investigations at Quenching Research Centre. Materials Performance and Characterization, 3 (4). pp. 3-18. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Ljubas, Davor and Franzreb, Matthias and Bruun Hansen, Hans Christian and Weidler, Peter G. (2014) Magnetizing of nano-materials on example of Degussa's P-25 TiO2 photocatalyst: Synthesis of magnetic aggregates, characterization and possible use. = Magnetizing of nano-materials on example of Degussa's P-25 TiO2 photocatalyst: Synthesis of magnetic aggregates, characterization and possible use. Separation and Purification Technology, 136. pp. 274-285. ISSN 1383-5866. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.

Ljubas, Davor and Turčić, Hrvoje and Zebić Avdičević, Maja (2014) Degradation of azo-dye aqueous solution using TiO2 nanoparticles irradiated with natural solar and artificial solar-like radiation. = Degradation of azo-dye aqueous solution using TiO2 nanoparticles irradiated with natural solar and artificial solar-like radiation. In: MATRIB 2014: materials, tribology, recycling, 26.-28.06.2014., Vela Luka, Hrvatska.

Ljubenkov, Boris and Žiha, Kalman (2014) Conceptual design of shipyard for seagoing ships on the river Danube. = Conceptual design of shipyard for seagoing ships on the river Danube. In: 15th International Congress of the International Maritime Association of the Mediterranean, IMAM 2013;, 14-17.10.2013., A Coruna; Spain.

Lobrović, Mihael (2014) Robusna koordinirana regulacija baterijsko-ultrakondenzatorskog sustava za pohranu energije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.

Lončar, Dražen and Guzović, Zvonimir and Šerman, Nikola (2014) Performance improvement of biomass cogeneration plant by dual loop organic rankine cycle. = Performance improvement of biomass cogeneration plant by dual loop organic rankine cycle. In: 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2014, 23.-27.08.2014., Prague; Czech Republic.

Lončarek, Igor (2014) Miješalica za beton pogonjena traktorom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Lončarević, Šimun (2014) Numeričko određivanje mehaničke impedancije rastojnika-prigušivača tipa "quad". = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Bakić, Ante (2014) A Constitutive Model for Bovine Cortical Bone under Cyclic Creep-Recovery Loading. = A Constitutive Model for Bovine Cortical Bone under Cyclic Creep-Recovery Loading. Key Engineering Materials, 577-57. pp. 649-652. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Bakić, Ante (2014) A constitutive model for bovine cortical bone under cyclic creep-recovery loading. = A constitutive model for bovine cortical bone under cyclic creep-recovery loading. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Slokar, Ljerka (2014) Cyclic Creep and Recovery Behaviour of Glass Fibre Reinforced Epoxy Composite. = Cyclic Creep and Recovery Behaviour of Glass Fibre Reinforced Epoxy Composite. Key Engineering Materials, 577-57. pp. 657-660. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Lovrenić-Jugović, Martina and Tonković, Zdenko and Slokar, Ljerka (2014) Cyclic creep and recovery behaviour of glass fibre reinforced epoxy composite. = Cyclic creep and recovery behaviour of glass fibre reinforced epoxy composite. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

Lovrić, Domagoj (2014) Utjecaj parametara obrade i trošenja svrdla na raslojavanje kompozitnih materijala. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Lulić, Fabijan and Virag, Zdravko and Korade, Ivan (2014) Comparison from invasive and non-invasive method. = Comparison from invasive and non-invasive method. In: 31th Danubia-Adria Symposium, 24.-27.09.2014., Kempten, Germany.

Lulić, Ivan (2014) Uporaba metode regresijske analize u rješavanju problema vezanih za inženjersku praksu. = The use of regression analysis method in solving problems from engineering practice. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

M

Magić, Marija (2014) Primjene slitina s prisjetljivošću oblika u zrakoplovstvu. = Aerospace applications of shape memory alloys. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Majača, Sanela (2014) Zakonska regulativa u području održive proizvodnje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Majić Renjo, Marijana and Rede, Vera and Ćurković, Lidija (2014) Reverse indentation size effect of a duplex steel. = Reverse indentation size effect of a duplex steel. Kovove Materialy, 52 (5). pp. 299-304. ISSN 0023-432X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

Majić Renjo, Marijana and Ćurković, Lidija and Grilec, Krešimir and Sakoman, Matija (2014) Preparation of stable suspensions for slip casting of monolithic and composite ceramics. = Preparation of stable suspensions for slip casting of monolithic and composite ceramics. In: 4th international conference Mechanical technologies and structural materials, Split, Hrvatska.

Majić Renjo, Marijana and Ćurković, Lidija and Grilec, Krešimir and Sakoman, Matija and Jakovljević, Suzana (2014) SEM - EDS analysis of slip cast composite Al2O3 - ZrO2 ceramics. = SEM - EDS analysis of slip cast composite Al2O3 - ZrO2 ceramics. In: 4th international conference Mechanical technologies and structural materials, 25.-26.09.2014., Split, Hrvatska.

Majić Renjo, Marijana and Ćurković, Lidija and Ćorić, Danko (2014) Influence of alumina ceramics surface roughness on indentation size effect. = Influence of alumina ceramics surface roughness on indentation size effect. Materialprufung, 56 (1). pp. 32-39. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Majić Renjo, Marijana and Ćurković, Lidija and Ćorić, Danko (2014) Influence of surface roughness of alumina ceramics on indentation size. = Influence of surface roughness of alumina ceramics on indentation size. Materialpruefung/Materials Testing, 56 (1). pp. 32-39. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Majić Renjo, Marijana and Ćurković, Lidija and Štefančić, Sanja and Ćorić, Danko (2014) Indentation size effect of Y-TZP dental ceramics. = Indentation size effect of Y-TZP dental ceramics. Dental Materials, 30 (12). e371-e376. ISSN 0109-5641. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.

Majstorović, Domagoj (2014) Design of an adaptive controller for input uncertainties on a hexacopter UAV. = Design of an adaptive controller for input uncertainties on a hexacopter UAV. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.

Malacko, Matija (2014) Brtvljenje konusnog rastavljivog spoja visokotlačne cijevi i pumpe za izravno ubrizgavanje benzina. = Sealing of conical separable joint between high pressure pipe and gasoline direct injection fuel pump. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Malenica, Šime and Choi, Young Myung and Vladimir, Nikola and Kwon, Sun Hong and Chen, Xiao Bo (2014) Wave induced hydroelastic behavior of the vertical circular cylinder with liquid filled tank at the top. = Wave induced hydroelastic behavior of the vertical circular cylinder with liquid filled tank at the top. In: International Workshop on Water Waves and Floating Bodies (IWWWFB), 30.03.-02.04.2014., Osaka, Japan.

Malić, Mile (2014) Optimiranje tlakova oduzimanja pare za regenerativno zagrijavanje napojne vode. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Mance, Marko (2014) Modeliranje hibridnog hidrauličkog vozila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.

Mandir, Mario (2014) Abrazivni vodeni mlaz u obradi nehomogenih materijala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Mandić, Marko (2014) Postupak mjerenja emisije štetnih produkata izgaranja iz motora s unutarnjim izgaranjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Margetić, Mislav (2014) Analiza mogućnosti izgradnje nuklearne elektrane u RH. = Analysis of the possibility of building a nuclear power plant in RH. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Marinković, Bojan and Ciancaglini, Vincenzo and Ognjanović, Zoran and Glavan, Paola and Liquori, Luigi and Maksimović, Petar (2014) Analyzing the exhaustiveness of the Synapse protocol. = Analyzing the exhaustiveness of the Synapse protocol. Peer-to-Peer Networking and Applications. ISSN 1936-6442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 6. (In Press)

Marković, Milan (2014) Maketa servosustava za pozicioniranje. = Mock up of servosystem for position control. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Markovska, Nataša and Klemeš, Jiri Jaromir and Duić, Neven and Guzović, Zvonimir and Mathiesen, Brian Vad and Lund, Henrik and Yan, Jinyue (2014) Sustainable development of energy, water and environment systems. = Sustainable development of energy, water and environment systems. Applied Energy, 135. pp. 597-599. ISSN 0306-2619. Vrsta rada: Editorial. Kvartili JCR: Q1 (2014). Točan broj autora: 7.

Markovska, Nataša and Klemeš, Jiri Jaromir and Duić, Neven and Guzović, Zvonimir and Vad Mathiesen, Brian and Lund, Henrik and Yan, Jinyue (2014) Sustainable development of energy, water and environment system. = Sustainable development of energy, water and environment systems. Energy, 76. pp. 1-3. ISSN 0360-5442. Vrsta rada: Editorial. Kvartili JCR: Q1 (2014). Točan broj autora: 7.

Markovska, Nataša and Taseska-Gjorgievska, Verica and Dedinec, Aleksandar and Obradovic Grncarovska, Teodora and Duić, Neven and Pop-Jordanov, Jordan and Kanevce, Gligor (2014) EU 2030 climate targets - a perspective of an EU candidate country. = EU 2030 climate targets - a perspective of an EU candidate country. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29.06.-03.07.2014., Ohrid, Makedonija.

Martinec, Tomislav and Pavković, Neven (2014) Visualization of Information Traceability in Product Development. = Visualization of Information Traceability in Product Development. In: DESIGN 2014 Conference, 19-22.05.2014., Dubrovnik, Hrvatska.

Martinjak, Matija (2014) Usporedba ionske izmjene i reverzne osmoze kao postupaka za pripremu napojne vode kotla. = Comparison of ion exchange and reverse osmosis in the case of boiler feed water treatmnent. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.

Martić, Ivana (2014) Procjena pomorstvenih karakteristika neoštećenog i oštećenog broda. = Evaluation of seakeeping characteristics of intact and damaged ship. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.

Martić, Ivana and Degiuli, Nastia and Munić, Ivan (2014) Istraživanje utjecaja dinamičke oplakane površine na otpor poludeplasmanske forme. = An investigation into the effect of dynamic wetted surface area on the resistance of semi-planing hull. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Marušić, Ante (2014) Aerodinamika nosive konstrukcije ovješenog mosta u uvjetima leđenja. = Aerodynamic behavior of bridge cables in icing conditions. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje.

Maršić, Tomislav (2014) Vodna turbina za malu hidroelektranu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.

Matas, Marko (2014) Degradacija biorazgradivih polimera. = Degradation of biodegradable polimers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Matasić, Ivan (2014) Zaštita čeličnih konstrukcija epoksidnim premazima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Matijević, Božidar (2014) Evaluation of Boride Layer Growth on Carbon Steel Surfaces. = Evaluation of Boride Layer Growth on Carbon Steel Surfaces. Metal Science and Heat Treatment, 56 (5-6). pp. 269-273. ISSN 0026-0673. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 1.

Matijević, Božidar (2014) Study of the growth of boride layer on the surface carbon steel. = Study of the growth of boride layer on the surface carbon steel. Metallovedenie i termicheskaya obrabotka metallov, 153. pp. 41-45. ISSN 0026-0819. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Matijević, Božidar and Pedišić, Ljiljana (2014) Influence of additive chemistry on the physical, chemical and cooling properties of quenching oils. = Influence of additive chemistry on the physical, chemical and cooling properties of quenching oils. Materials performancemance and Characterization, 4 (3). pp. 283-292. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Matijević, Magdalena (2014) Analiza trošenja tribosustava vratilo-homokinetički zglob. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Matković, Hrvoje (2014) Lijevanje ploče od aluminijske legure. = Casting of aluminium alloy plate. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Matuško, Mario (2014) Razvoj i izrada kompozitne tvorevine za bolid formule. = Development and processing of composite product for formula bolide. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Medić, Josip (2014) Načelno rješenje sustava upravljanja tokovima energije električke mikromreže naftnog bušnog postrojenja. = Principal solution of energy management system for the oil drilling rig electrical microgrid. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.

Mešin, Filip (2014) Model procjene kašnjenja putničkih zrakoplova. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Mešić, Dino (2014) Aditivni postupci u medicini. = Additive manufacturing in medicine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Midžić, Ida and Štorga, Mario and Marjanović, Dorian (2014) Energy quality hierarchy and "transformity" in evaluation of product's working principles. = Energy quality hierarchy and "transformity" in evaluation of product's working principles. In: 21st CIRP Conference on Life Cycle Engineering, 18-20.06.2014., Trondheim, Norway.

Midžić, Ida and Štorga, Mario and Marjanović, Dorian (2014) Using ecodesign guidelines for concept evaluation: Findings from an experiment. = Using ecodesign guidelines for concept evaluation: Findings from an experiment. In: 13th International Design Conference DESIGN 2014, 19-22.05.2014., Dubrovnik, Hrvatska.

Mihajlović, Aleksandar (2014) Primjena alata vitkog menadžmenta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Mihalic, Ivana and Unkić, Faruk and Hrženjak, Miro and Vasilić, Milorad and Bauer, Branko (2014) Pojava chunky grafita u debelostijenim odljevcima od nodularnog lijeva. = Appearance of chunky graphite in thick-walled castings. In: 14th International Foundrymen Conference ; Development and Optimization of the Castings Production Processes, 15-16.05.2014, Opatija, Republika Hrvatska.

Mihalić, Tihomir and Guzović, Zvonimir and Predin, Andrej (2014) CFD flow analysis in the centrifugal vortex pump. = CFD flow analysis in the centrifugal vortex pump. International Journal of Numerical Methods for Heat and Fluid Flow, 24 (3). pp. 545-562. ISSN 0961-5539. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2014). Točan broj autora: 3.

Mihalj, Tomislav (2014) Automatizacija postupka izrade simulacijskog modela motora iz eksperimentalnih podataka. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Mihaljević, Bojan (2014) Analiza rešetkastih panela kompozitnih zrakoplovnih konstrukcija. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.

Mihić, Dejan (2014) Otpornost na trošenje TiO2-ZrO2 sol-gel filmova. = Wear resistance of TiO2-ZrO2 sol-gel films. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Mihoković, Morena (2014) Opterećenje donje čeljusti kod žvakanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Miholić, Matija (2014) Konstrukcijsko rješenje preinake hidrauličke preše. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Mikek, Domagoj (2014) Uklanjanje prekursora dezinfekcijskih nusprodukata modificiranim postupkom umekšavanja vode vapnom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.

Mikolčević, Ivor (2014) Stroj za proizvodnju bademovog mlijeka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Mikulandrić, Robert and Lončar, Dražen and Böhning, Dorith and Böhme, Rene and Beckmann, Michael (2014) Artificial neural network modelling approach for a biomass gasification process in fixed bed gasifiers. = Artificial neural network modelling approach for a biomass gasification process in fixed bed gasifiers. Energy Conversion and Management, 87. pp. 1210-1223. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 5.

Mikulić, Antonio (2014) Povećanje elastične smične nosivosti zglobno oslonjenih izotropnih ploča. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Mikulić, Ivan (2014) Analitički i eksperimentalni pristup određivanju zavarljivosti pri mokrom podvodnom zavarivanju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Mikulčić, Hrvoje and Cabezas, Heriberto and Vujanović, Milan and Duić, Neven (2014) Emergy and Ecological Footprint Based Analysis of Different Cement Manufacturing Processes. = Emergy and Ecological Footprint Based Analysis of Different Cement Manufacturing Processes. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20.-27.09.2014., Venecija, Italija - Istanbul, Turska.

Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Duić, Neven (2014) Numerical study of co-firing pulverized coal and biomass inside a cement calciner. = Numerical study of co-firing pulverized coal and biomass inside a cement calciner. Waste Management and Research, 32 (7). pp. 661-669. ISSN 0734-242X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 4.

Mikulčić, Hrvoje and Vujanović, Milan and Ashhab, Moh’d Sami and Duić, Neven (2014) Large eddy simulation of a two-phase reacting swirl flow inside a cement cyclone. = Large eddy simulation of a two-phase reacting swirl flow inside a cement cyclone. Energy, 75. pp. 89-96. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.

Mikulčić, Martin (2014) Redukcija reda modela u računalnoj dinamici vjetroagregata. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stegić, Milenko.

Miler, Daniel (2014) Prijenosnik snage raspuštača papira. = Paper pulper power transmission device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Milić, Vladimir and Kasać, Josip and Šitum, Željko (2014) A Newton-like algorithm for L2-gain optimal control of an electro-hydraulic servo-system. = A Newton-like algorithm for L2-gain optimal control of an electro-hydraulic servo-system. In: 22nd Mediterranean Conference on Control and Automation, MED 2014, 16-19.06.2014., Palermo, Italy.

Milković, Vili and Jankovich, Dennis and Lisjak, Dragutin (2014) Prilog istraživanju uzroka proširenja osovinskih sklopova vagona u održavanju. = A contribution to research on the cause of axle assembly expansions of exploited freight wagons. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 21 (6). pp. 1433-1437. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 3.

Milutinović, Milan and Kranjčević, Nenad and Deur, Joško (2014) Multi-mass dynamic model of a variable-length tether used in a high altitude wind energy system. = Multi-mass dynamic model of a variable-length tether used in a high altitude wind energy system. Energy Conversion and Management, 87. pp. 1141-1150. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Milutinović, Milan and Čorić, Mirko and Deur, Joško (2014) Optimization-based control strategy for a Magnus effect-based airborne wind power production system. = Optimization-based control strategy for a Magnus effect-based airborne wind power production system. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija-Istanbul.

Mičić, Igor (2014) Sustav gospodarenja otpadnim polietilenskim filmovima, folijama i vrećicama. = Management system of waste polyethylene films, foils and bags. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Mičuga, Hrvoje (2014) Operativne performanse putničkog turbo-elisnog zrakoplova. = Operational performance of transport turboprop airplane. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Mišković, Darko (2014) Simulacija sustava regulacije parne turbine. = Steam turbine control system simulation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Mlinarić, Marko (2014) Suvremeni trendovi u obradi glodanjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škorić, Stephan.

Morović, Dinko (2014) Performanse bespilotnog autogira. = Performance of Unmanned Autogyro. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Mudronja, Luka and Katalinić, Marko and Bošnjak, Rino and Vidan, Pero and Parunov, Joško (2014) Operability guidelines for product tanker in heavy weather in the Adriatic Sea. = Operability guidelines for product tanker in heavy weather in the Adriatic Sea. Annual of Navigation The Journal of Polish Navigational Forum, 21. pp. 95-106. ISSN 1640-8632. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Mudronja, Luka and Parunov, Joško and Vidan, Pero (2014) Sustainable ship speed criteria for different sea states with example on container ship. = Sustainable ship speed criteria for different sea states with example on container ship. In: IMSC 2014 6th International Maritime Science Conference, 28-29.04.2014., Solin, Hrvatska.

Mudronja, Luka and Ćorak, Maro and Parunov, Joško and Vidan, Pero and Malenica, Šime (2014) Numerička analiza operativnosti kontejnerskog broda na valovitom moru te utjecaj upravljanja na valna opterećenja. = Numerical evaluation of operability envelope for ultra large container ship in extreme seas and influence of maneuvering on wave loads. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Mudronja, Vedran and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2014) Indeksi sposobnosti procesa i statističke tolerancije. = In: 14. Hrvatska konferencija o kvaliteti i 5. znanstveni skup Hrvatskog društva za kvalitetu, 15-17.05.2014., Baška, Otok Krk, Hrvatska.

Mudronja, Vedran and Baršić, Gorana and Runje, Biserka (2014) Umjeravanje vertikalne komponente elektroničko-mehaničkog uređaja s ticalom Perthometer S8P. = Calibration of the Vertical Measuring System of Stylus Instrument Perthometer S8P. Tehnički vjesnik – Technical Gazette: Scientific professional Journal of technical faculties of the Josip Juraj Strossmayer University of Osijek, 12 (1). pp. 141-145. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 3.

Mudronja, Vedran and Mahović, Sanjin and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2014) Example of statistical tolerances. = Example of statistical tolerances. In: MATRIB 2014. Materials, Wear, Recycling, 26-28.06.2014., Vela Luka, Hrvatska.

Mustafić, Haris (2014) Duplex postupci prevlačenja čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Mustać, Marin (2014) Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti. = Performance testing of thermostated water bath used for high-temperature dew-point generator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Mutavdžić Pavlović, Dragana and Ćurković, Lidija and Blažek, Dijana and Župan, Josip (2014) The sorption of sulfamethazine on soil samples: Isotherms and error analysis. = The sorption of sulfamethazine on soil samples: Isotherms and error analysis. Science of the total environment, 497. pp. 543-552. ISSN 0048-9697. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.

Müller, Andreas and Terze, Zdravko (2014) Modelling and Integration Concepts of Multibody Systems on Lie Groups. = Modelling and Integration Concepts of Multibody Systems on Lie Groups. In: Multibody Dynamics, Computational Methods and Applications. Computational Methods in Applied Sciences, Vol. 35 . Springer, Cham, Heidelberg, New York, Dordrecht, London, pp. 123-143. ISBN 978-3-319-07260-9

Müller, Andreas and Terze, Zdravko (2014) On the choice of configuration space for numerical Lie group integration of constrained rigid body systems. = On the choice of configuration space for numerical Lie group integration of constrained rigid body systems. Journal of Computational and Applied Mathematics, 262. pp. 3-13. ISSN 0377-0427. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 2.

Müller, Andreas and Terze, Zdravko (2014) The significance of the configuration space Lie group for the constraint satisfaction in numerical time integration of multibody systems. = The significance of the configuration space Lie group for the constraint satisfaction in numerical time integration of multibody systems. Mechanism and Machine Theory, 82. pp. 173-202. ISSN 0094-114X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 2.

N

Navijalić, Marko (2014) Informacijski sustavi za upravljanje odnosima s klijentima. = Information systems for customer relationship management. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Nemčić, Ivan (2014) Razvoj čeljusti za prihvat tetiva prilikom biomehaničkih ispitivanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Novak, Filip (2014) Utjecaj mjerne sile na rezultate mjerenja unutarnjih i vanjskih promjera. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Novak, Marko (2014) Mikrosklapanje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Novaković, Branko (2014) General Metrics in Relativistic Alpha Field Theory. = General Metrics in Relativistic Alpha Field Theory. CASYS : international journal of computing anticipatory systems, 27. pp. 93-104. ISSN 1373-5411. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko and Milić, Vladimir (2014) Application of control terms P1 and P2 to estimation of rotation curve of stars. = Application of control terms P1 and P2 to estimation of rotation curve of stars. In: 18th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", 10-12.09.2014., Budimpešta, Mađarska.

Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko and Milić, Vladimir (2014) Application of control terms P1 and P2 to estimation of rotation curve of stars. = Application of control terms P1 and P2 to estimation of rotation curve of stars. Journal of Trends in the Development of Machinery and Associated Technology, 18 (1). pp. 219-222. ISSN 2303-4009. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Novosel, Tomislav and Gašparović, Goran and Ćosić, Boris and Mustafa, Manal and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven (2014) Integration of desalination and renewables, a demonstration of the desalination module in the h2res model: Case study for Jordan. = Integration of desalination and renewables, a demonstration of the desalination module in the h2res model: Case study for Jordan. Chemical Engineering Transactions, 39 (Specia). pp. 355-360. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.

Novosel, Tomislav and Perković, Luka and Ban, Marko and Keko, Hrvoje and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven (2014) Hourly transport energy demand modeling – Impact of EVs on the Croatian electricity grid. = Hourly transport energy demand modeling – Impact of EVs on the Croatian electricity grid. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment System, 29.06-03.07.2014, Ohrid, Makedonija.

Novosel, Tomislav and Pukšec, Tomislav and Duić, Neven (2014) Economic Viability of Centralized Biogas Plants: A Case Study for Croatia. = Economic Viability of Centralized Biogas Plants: A Case Study for Croatia. Chemical Engineering Transactions, 42. pp. 85-90. ISSN 2283-9216. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Novosel, Tomislav and Pukšec, Tomislav and Duić, Neven (2014) Economic viability and environmental impact of centralized biogas plants in Croatia. = Economic viability and environmental impact of centralized biogas plants in Croatia. Computer Aided Chemical Engineering, 33. pp. 1867-1872. ISSN 1570-7946. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Pukšec, Tomislav and Mohsen, S. Mousa and Ashhab, S. Moh'd and Ababneh, K. Amer (2014) The influence of reverse osmosis desalination in a combination with pump storage on the penetration of wind and PV energy: A case study for Jordan. = The influence of reverse osmosis desalination in a combination with pump storage on the penetration of wind and PV energy: A case study for Jordan. Energy, 76. pp. 73-81. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 8.

Novosel, Tomislav and Ćosić, Boris and Pukšec, Tomislav and Krajačić, Goran and Mustafa, Manal and Mathiesen, Brian Vad and Lund, Henrik and Duić, Neven (2014) 100% renewable energy systems using wind, PV and desalination: A case study for the country of Jordan. = 100% renewable energy systems using wind, PV and desalination: A case study for the country of Jordan. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Nuić, Kristijan (2014) Informacijski sustavi za simulaciju i optimiranje proizvodnih procesa. = Information systems for the simulation and optimization of production processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

O

Obućina, Matej (2014) Projekt grijanja stambene zgrade s dizalicom topline. = Design of heating system with heat pump for residential building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Opalić, Milan and Domitran, Zoran and Katana, Branko (2014) Usporedba anifrikcijskih svojstava polimernih kompozita i bronce. = Comparison of antifriction properties of polymer composites and bronze. Tehnički vjesnik, 21 (5). pp. 1089-1095. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 3.

Opetuk, Tihomir and Tošić, Marina and Đukić, Goran and Šolaja, Julio (2014) Storage system with movable racks - A case study. = Storage system with movable racks - A case study. In: 12th International Conference on Industrial Logistics, ICIL 2014, 11-13.06.2014., Bol, Brač; Croatia.

Opetuk, Tihomir and Đukić, Goran (2014) Literature Survey of GSCM With Interrelated Concepts. = Literature Survey of GSCM With Interrelated Concepts. Acta Technica Corviniensis - Bulletin of Engineering, 1. pp. 77-90. ISSN 2067-3809. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Opetuk, Tihomir and Đukić, Goran (2014) Toward to the research of the Green Supply Chain Management in Croatia. = Toward to the research of the Green Supply Chain Management in Croatia. In: The 11th International Conference on Logistics & Sustainable Transport 2014, 19.-21.06.2014., Celje, Slovenija.

Orsag, Luka (2014) Vizualno prepoznavanje i lokalizacija objekata. = Objects recoginition and localisation using PCL software library and 3D CAD models. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Orsag, Matko and Kovačić, Zdenko and Flegarić, Stjepan and Brkić, Kristijan and Balać, Boris (2014) RJET – 111: Autonomous Mobile Robot for Water Intake Channel Maintenance in Power Plant Cooling Systems. = RJET – 111: Autonomous Mobile Robot for Water Intake Channel Maintenance in Power Plant Cooling Systems. In: 23rd Internationak Conference Nuclear Energy for New Europe, 8-11.9.2014., Portorož, Slovenija.

Orsag, Matko and Kovačić, Zdenko and Flegarić, Stjepan and Brkić, Kristijan and Balać, Boris and Mamić, Ante (2014) Autonomous Mobile Robots For Deep And Shallow Hydrodynamic Treatment Of Concrete And Metal Surfaces. = Autonomous Mobile Robots For Deep And Shallow Hydrodynamic Treatment Of Concrete And Metal Surfaces. In: 23rd Internationak Conference Nuclear Energy for New Europe., 8-11.9.2014, Portorož, Slovenija.

Osman, Krešimir (2014) Razvoj tehničkih sustava temeljem modela ponašanja arhitekture sustava. = Development of tehnical systems based on behaviour prediction of system architecture. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Osman, Krešimir and Štorga, Mario and Marjanović, Dorian (2014) An Approach to Nonlinear Behaviour Prediction of Technical Systems. = An Approach to Nonlinear Behaviour Prediction of Technical Systems. In: 13th International Design Conference, DESIGN 2014, 19-22.05.2014., Dubrovnik, Croatia.

Osman, Zoran (2014) Ispitivanje kalibratora temperature sa suhim blokom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Očić, Anđelko (2014) Utjecaj vode na dinamičko-mehanička svojstva etilen/vinil-alkoholnog kopolimera. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Očko, Ivan (2014) Opis i analiza procesa prijema robe u distribucijskom centru. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

P

Padovan, Tomislav (2014) Komora za duboko zamrzavanje mesa nakon predohlađivanja. = Room for preecooled meat deep freezing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurko, Tonko.

Pajan, Matija (2014) Mehanizmi dotrajavanja kalupa za tlačni lijev. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Pandža, Viktor (2014) Analiza čvrstoće stupa vjetroagregata. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Papa, Tihomir (2014) Utjecaj dubokog hlađenja na svojstva Fe-ljevova. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Parać, Marin (2014) Eksperimentalni postav davača brzine vrtnje motora. = Experimental Setup of Engine Speed Sensor. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Parunov, Joško and Ćorak, Maro and Žiha, Kalman and Radanović, Jadranka (2014) Pregled gamma funkcija kod akumuliranog proračuna zamora brodskih konstrukcija. = Review of gamma functions in accumulated fatigue damage assessment of ship structures. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Pavalić, Martin (2014) Kemijsko čišćenje nehrđajućih čelika. = Chemical cleaning of stainless steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Pavić, Andrej (2014) Katodna zaštita odobalnih konstrukcija. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Pavić, Marko (2014) Suvremeni trendovi u obradi brušenjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škorić, Stephan.

Pavičević, Matija (2014) Određivanje hidrodinamičkih karakteristika osigurača protoka plina. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje.

Pavković, Danijel and Hoić, Matija and Deur, Joško and Petrić, Joško (2014) Energy storage systems sizing study for a high-altitude wind energy application. = Energy storage systems sizing study for a high-altitude wind energy application. Energy, 76. pp. 91-103. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.

Pavković, Danijel and Lobrović, Mihael and Hrgetić, Mario and Komljenović, Ante (2014) A design of DC bus control system for EVs based on battery/ultracapacitor hybrid energy storage. = A design of DC bus control system for EVs based on battery/ultracapacitor hybrid energy storage. In: 2014 IEEE International Electric Vehicle Conference, IEVC 201, 17-19.12.2014., Firenza, Italija.

Pavković, Danijel and Lobrović, Mihael and Hrgetić, Mario and Komljenović, Ante and Smetko, Viktor (2014) Battery current and voltage control system design with charging application. = Battery current and voltage control system design with charging application. In: 2014 IEEE Conference on Control Applications, CCA 2014, 08-10.10.2014., Juan Les Antibes, France.

Pavković, Danijel and Polak, Siniša and Zorc, Davor (2014) PID controller auto-tuning based on process step response and damping optimum criterion. = PID controller auto-tuning based on process step response and damping optimum criterion. ISA Transactions, 53 (1). pp. 85-96. ISSN 0019-0578. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Pavković, Danijel and Smetko, Viktor and Hrgetić, Mario and Komljenović, Ante (2014) Dual Kalman filter-based SoC/SoH estimator for an ultracapacitor module. = Dual Kalman filter-based SoC/SoH estimator for an ultracapacitor module. In: 2014 IEEE Conference on Control Applications, CCA 2014, 08-10.10.2014., Juan Les Antibes, France.

Pavković, Marko (2014) Utjecaj vode i UV zračenja na dinamičko-mehanička svojstva biaksijalno orijentiranog etilen/vinil-alkoholnog kopolimera. = Effect of water and UV radiation on dynamic-mechanical properties of biaxially oriented ethylene-vinyl alcohol copolymer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Pavković, Neven and Martinec, Tomislav (2014) E8723_VISINEV_A21_22_D27_D28 Diagramming Tools for Visualising Engineering Information Structures. = E8723_VISINEV_A21_22_D27_D28 Diagramming Tools for Visualising Engineering Information Structures. UNSPECIFIED.

Pavković, Neven and Martinec, Tomislav and Štorga, Mario (2014) Traceability – a factor of integration and a method to deal with complexity. = Traceability – a factor of integration and a method to deal with complexity. In: 10THinternational workshop on integrated design engineering IDE workshop, 10-12.09.2014., Gommern (Magdeburg), Njemačka.

Pavlović, Ivan (2014) Vitlo za vuču parajedrilice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.

Pažanin, Ivan (2014) Statička i dinamička neuronska mreža u identifikaciji sustava i procesa. = strojarstvo; dinamička; statička; neuronska mreža; mehatronika. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.

Pažur, Marko (2014) LEGO Mindstorms u automatskoj regulaciji. = Lego Mindstorms in automatic control. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.

Pedišić, Ljiljana and Matijević, Božidar and NOVINA, Bruno (2014) Quenching oil selection based on tribological effects at metal cooling processes. = Quenching oil selection based on tribological effects at metal cooling processes. In: 8th Int. Conference on Tribology BALKANTRIB'14, 30.10 - 1.11.2014., Sinaia, Romania.

Pejić, Bojan (2014) Lean Principles Implementation in the Engineering Area. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Penava, Frano (2014) Prirodni materijali u vozilima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Perić, Mato and Tonković, Zdenko and Rodić, Alan and Surjak, Martin and Garašić, Ivica and Boras, Ivanka and Švaić, Srećko (2014) Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weld. = Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weld. Materials and Design, 53. pp. 1052-1063. ISSN 0261-3069. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 7.

Perković, Ivan (2014) Geometrijske karakteristike ovjesa bolida Formule Student. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Perković, Luka (2014) Numeričko modeliranje turbulentnih predmiješanih plamenova metodom simulacije velikih vrtloga. = Numerical modelling of turbulent premixed jet flames in large eddy simulation framework. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Perković, Luka and Priesching, Peter and Bogensperger, Michael and Duić, Neven (2014) Framework of coherent structure method (CSM) for les simulation of isothermal and reacting swirling flows. = Framework of coherent structure method (CSM) for les simulation of isothermal and reacting swirling flows. Chemical Engineering Transactions, 39. pp. 883-888. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Perković, Tomislav (2014) Konstrukcijsko rješenje kućišta ventila. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.

Perleta, Ivan (2014) Mogućnost automatskog prepoznavanja odziva nepravilnosti sa slikovnog zapisa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Perlić, Domagoj (2014) Električno dostavno vozilo. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Petković, Zvonimir (2014) Utjecaj olovnih folija na kvalitetu digitalnog radiografskog zapisa kod računalne radiografije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2014) The O’Rourke droplet collision model for the Euler-Eulerian framework. = The O’Rourke droplet collision model for the Euler-Eulerian framework. In: 26th European Conference on Liquid Atomization and Spray Systems, 8-10.09.2014, Bremen, Njemačka.

Petrović, Filip (2014) Kosilica trave pogonjena traktorom. = Tractor driver lawnmower. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Petruschke, Philipp and Gašparović, Goran and Voll, Philip and Krajačić, Goran and Duić, Neven and Bardow, Andre (2014) A hybrid approach for the efficient synthesis of renewable energy systems. = A hybrid approach for the efficient synthesis of renewable energy systems. Applied Energy, 135. pp. 625-633. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 6.

Peček, Miljenko (2014) Trošenje svrdla kod bušenja različitih kamenih struktura. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Pikelj, Tomislav (2014) Orbitalno TIG zavarivanje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Pilipović, Ana and Drstvenšek, Igor and Šercer, Mladen (2014) Mathematical model for the selection of processing parameters in selective laser sintering of polymer products. = Mathematical model for the selection of processing parameters in selective laser sintering of polymer products. Advances in Mechanical Engineering, 2014. pp. 1-9. ISSN 1687-8132. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.

Pilipović, Ana and Šercer, Mladen and Radić-Boršić, Ivana (2014) Processing and Properties of Marine Biodegradable plastics. = Processing and Properties of Marine Biodegradable plastics. In: Gospodarski forum GOF 2014, Šibenik, Solaris, Hrvatska.

Piljek, Petar and Keran, Zdenka and Math, Miljenko (2014) Micromachining - Review of Literature from 1980 to 2010. = Micromachining - Review of Literature from 1980 to 2010. Interdisciplinary description of complex systems, 12 (1). pp. 1-27. ISSN (ISSN1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Piljek, Petar and Keran, Zdenka and Ninić, Ante (2014) Micromachining: State of the Art. = Micromachining: State of the Art. LAP LAMBERT Academic Publishing, Saarbruecken, -. ISBN 978-3659615108

Pintarić, Maristel (2014) Razvoj tankostjenog modela željezničkog vagona i kalupa za injekcijsko prešanje. = Development of thin-wall rail waggon model and mould for injection moulding. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Pinturić, Davor (2014) Razvoj plastičnih spremnika za razvrstavanje komunalnog otpada u kućanstvima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Pirić, Karlo (2014) Analiza pouzdanosti u konceptualnom projektiranju konstrukcije broda. = Reliability analysis in ship structural concept design. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žanić, Vedran.

Pirić, Karlo and Kitarović, Stanislav and Žanić, Vedran (2014) Validation and verification of modified DRM with respect to its application in the reliability based design approach. = Validation and verification of modified DRM with respect to its application in the reliability based design approach. In: 15th International Maritime Association of the Mediterranean Congress, 14-17.10.2013., A Coruna, Španjolska.

Plavšić, Maja (2014) Analiza uzdužne granične čvrstoće trupa broda oštećenog uslijed nasukavanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Pletikapić, Latica (2014) Identifikacija parametra plućne cirkulacije u modelu s koncentriranim parametrima. = Parameter identification in a lumped model of pulmonary circulation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.

Plodinec, Milivoj and Gajović, Andreja and Iveković, Damir and Tomašić, Nenad and Zimmerman, Boris and Macan, Jelena and Haramina, Tatjana and Su, DangSeng and Willinger, Marc (2014) Study of thermal stability of (3 - aminopropyl) trimethoxy silane- grafted titanate nanotubes for application as nanofillers in polymers. = Study of thermal stability of ( 3 - aminopropyl ) trimethoxy silane - grafted titanate nanotubes for application as nanofillers in polymers. Nanotechnology, 25. pp. 435601-435614. ISSN 0957-4484. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 9.

Pocrnić, Nikola (2014) Procjena mišićne sile. = Estimation of the muscle force. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Poljak, Božo (2014) Modeliranje i upravljanje inverznog njihala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Pongrac, Dario (2014) Zavarivanje čelika otpornih na trošenje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Popek, Tomislav (2014) Numerička simulacija procesa u generatoru pare s izgaranjem ugljene prašine. = Numerical simulation of pulverized coal fired steam generator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.

Popović, Ivan (2014) Proračun doprinosa mjera za učinkovito korištenje energije i primjenu obnovljivih izvora energije na smanjenje emisije stakleničkih plinova u općinama Dubrovačko-neretvanske županije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Potočki, Eva (2014) Utjecaj životnog vijeka proizvoda na okoliš. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Požgaj, Vedran (2014) Primjena norme HRN EN 1090 u proizvodnji zavarivanjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Prajdić, Slaven (2014) Određivanje protočne količine rotametrom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Prebeg, Pero and Žanić, Vedran and Važić, Božo (2014) Application of a surrogate modeling to the ship structural design. = Application of a surrogate modeling to the ship structural design. Ocean Engineering, 84. pp. 259-272. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Premec, Jasmina (2014) Neuronska mreža u nadzoru degradacije piezoelektričnih bimorfnih pretvornika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Prester, Jasna and Matijević, Božidar (2014) Organization of the Purchasing Function for Innovation. = Organization of the Purchasing Function for Innovation. In: ICOMS 2014: XII International Conference on Operations Management and Strategy, 13-14.11.2014, Venecija, Italija.

Prević, Matija (2014) Primjena automata s konačnim brojem stanja u procesima obrade i razmjene podataka. = Application of finite state automata in processing and data exchange. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Prgomet, Branimr (2014) Konstrukcija multiplikatora vjetroagregata snage 1,8 MW. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Primorac, Ivan (2014) Otpornost na trošenje TiO2 sol-gel filmova. = Wear resistance of TiO2 sol-gel films. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Prosinečki, Tomislav (2014) Sustav provjere stabiliteta i plovnosti malih plovila u skladu s normama ISO12217. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grubišić, Izvor.

Prpić-Oršić, Jasna and Parunov, Joško and Šikić, Igor (2014) Operation of ULCS - real life. = Operation of ULCS - real life. International Journal of Naval Architecture and Ocean Engineering, 6 (6). pp. 1014-1023. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 3.

Prpić-Oršić, Jasna and Slapničar, Vedran and Turk, Anton (2014) Berth Operability Estimation Related to Ship Motion. = Berth Operability Estimation Related to Ship Motion. Transactions of FAMENA, 38 (1). pp. 13-24. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 3.

Pršir, Matija (2014) Razvoj polimernog proizvoda za pakiranje praškastih proizvoda u prehrambenoj industriji. = Development of polymer product for packaging of powder products in food industry. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Pugar, Daniel (2014) Analiza svojstva i primjene APM pjena. = Analysis of properties and application of APM foam. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Pukšec, Tomislav and Mathiesen, Brian Vad and Novosel, Tomislav and Duić, Neven (2014) Assessing the impact of energy saving measures on the future energy demand and related GHG (greenhouse gas) emission reduction of Croatia. = Assessing the impact of energy saving measures on the future energy demand and related GHG (greenhouse gas) emission reduction of Croatia. Energy, 76. pp. 198-209. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.

Puljić, Damjan (2014) Ispitivanje uređaja za smanjenje aerodinamičkog otpora cestovnih vozila. = Investigation Of Aerodynamic Drag Reduction Devices in Automotive Engineering. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran and Šoda, Ante.

Pustaić, Dragan and Cajner, Franjo (2014) Influence of heat treatment on crack tip opening displacement and on resistance of crack propagation of alloyed steel. = Influence of heat treatment on crack tip opening displacement and on resistance of crack propagation of alloyed steel. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.

Pustaić, Dragan and Tonković, Zdenko and Wolf, Hinko (2014) Mehanika deformabilnih tijela: 1. Mehanika konstrukcija. = Mechanics of solid bodies: 1. Structural Mechanics. Tehnička mehanika . Fakultet strojarstva i brodogradnje, Sveučilište u Zagrebu, Zagreb, -. ISBN 978-953-7738-24-2

Pustaić, Dragan and Tonković, Zdenko and Wolf, Hinko (2014) Mehanika deformabilnih tijela: 2. Čvrstoća elemenata konstrukcija. = Mechanics of solid bodies: Strength of Structural Components. Tehnička mehanika . Fakultet strojarstva i brodogradnje, Sveučilište u Zagrebu, Zagreb, -. ISBN 978-953-7738-25-9

Pustaić, Maja (2014) Uređaj za ispitivanje dijelova vozila usporenjem. = Deceleration testing device for motor vehicles components. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Pustaić, Maja and Wolf, Hinko and Pustaić, Dragan (2014) Krutost i čvrstoća segmenta kućišta statora hidrogeneratora pri montaži i transportu. = Rigidity and Strength of one Segment of Hydrogenerator´s stationary Part at Assemblage and Transportation. In: Šesti susret Hrvatskoga društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Putak Ivić, Domagoj (2014) Primjena metalnih pjena za ojačanje jarbola. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Putar, Filip (2014) Numerička analiza zaostalih naprezanja i deformacija kod zavarivanja. = Numerical Analysis of Welding Residual Stresses and Deformations. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Puče, Andro (2014) Određivanje dinamičke karakteristike MAG zavarivanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Q

Qin, Tongran and Tuković, Željko and Grigoriev, Roman O. (2014) Buoyancy-thermocapillary convection of volatile fluids under atmospheric conditions. = Buoyancy-thermocapillary convection of volatile fluids under atmospheric conditions. International Journal of Heat and Mass Transfer, 75. pp. 284-301. ISSN 0017-9310. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

R

Radić, Josip Marin (2014) Inhibirajuća svojstva emulzija za hlađenje i podmazivanje. = Inhibition properties of cooling and lubricating emulsions. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.

Radić, Jurica (2014) Erozijsko trošenje zavarenog spoja legure Monel 400. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Radić, Marko (2014) On-line rješavanje edukacijskih primjera u mrežnom oblaku. = Online solving educational models in the WEB cloud. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Radić, Mateja (2014) Energijska i eksergijska analiza kompresorsko-parne dizalice topline. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.

Radić, Tomislav (2014) Višeagentna robotska montaža. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Radović, Antonio (2014) Planiranje i praćenje proizvodnje. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Radoš, Ivan (2014) Usporedba niskobudžetnih 3D printera. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Rajaković, Marko (2014) Dinamička neuronska mreža u regulaciji stupnja istrošenosti reznog alata. = Application of recurrent neural network in the tool wear control. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.

Rakvin, Marko and Markučič, Damir and Dragojević, Andreja (2014) Application of Computed Radiography (CR) for characterization of historical documents. = Application of Computed Radiography (CR) for characterization of historical documents. In: 11th European Conference on Non-Destructive Testing (ECNDT 2014), 06-11.10.2014., Prag, Češka.

Rakvin, Marko and Markučič, Damir and Hižman, Boris (2014) Evaluation of pipe wall thickness based on contrast measurement using Computed Radiography (CR). = Evaluation of pipe wall thickness based on contrast measurement using Computed Radiography (CR). In: 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013, 23.-26.10.2013., Zadar, Hrvatska.

Ranogajec, Vanja (2014) Implementacija digitalnog sustava regulacije istosmjernog pogona. = Implementation of DC drive digital control system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Raos, Pero and Stojšić, Josip and Šercer, Mladen and Pilipović, Ana (2014) Effects of compounding conditions on tensile properties of polyamide 12 / clay nanocomposites. = Effects of compounding conditions on tensile properties of polyamide 12 / clay nanocomposites. In: International Conference on Innovative Technologie s,  IN‐TECH 2014, Leiria, Portugal.

Rastović, Mirko (2014) Smart City sustav za mapiranje kvalitete gradskih prometnica. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Rauch, Martina (2014) Optimizacija kombiniranog Brayton-Rankineova ciklusa s obzirom na ukupni termički stupanj djelovanja. = Optimization of combined Bryton-Rnakine cycle with respect to total thermal efficiency. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun and Virag, Zdravko.

Razum, Tomislav (2014) Prionjivost nanostrukturiranih keramičkih prevlaka. = Adhesion of nanostructured ceramic films. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Rašić, Marko (2014) Primjena koncepta održive proizvodnje u procesu cinčanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Rede, Vera and Ćorić, Danko (2014) Utjecaj parametara rastopnog žarenja na mikrostrukturu i mehanička svojstva alsimgmn legure. = Influence of solution heat treating parameters on microstructure and mechanical properties of alsimgmn alloy. In: 14th INTERNATIONAL FOUNDRYMEN CONFERENCE - Development and Optimization of the Castings Production Processes, 15-16.05.2014., Opatija, Hrvatska.

Repar, Karlo (2014) Uporaba ugljičnih vlakana u kompozitima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Rezić, Iva and Ujević, Magdalena and Ćurković, Lidija (2014) Investigation of metal ion release from violin, viola, and cello strings after dissolution in corrosive solution. = Investigation of metal ion release from violin, viola, and cello strings after dissolution in corrosive solution. Materials and Corrosion, 65 (9). pp. 931-934. ISSN 0947-5117. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.

Režek, Robert (2014) Uporaba probabilističkog modela vjerojatnosti pri određivanju minimalne energije paljenja prašine. = Determination of minimum ignition energy of dust using probabilistic model. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko and Cajner, Hrvoje.

Ribarić, Filip (2014) Utjecaj izlaganja UV zračenju na dinamičko-mehanička svojstva etilen/vinil-alkoholnog kopolimera prethodno držanog u vodi. = Effect of UV radiation on dynamic-mechanical properties of ethylene-vinyl alcohol copolymer previously conditioned in water. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Ribić, Marko (2014) Ispitivanje HHO uređaja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Rigler, Damir (2014) Ocjena točnosti metode uronjene granice u OpenFOAM. = Validation of Immersed Boundary Method in OpenFOAM. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Rodinger, Tomislav (2014) Karakterizacija nehrđajućeg čelika za primjenu u medicini. = Characterisation of stainless steel for medical applications. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Roksandić, Roko (2014) Sustav za primjenu kišnice za kućnu upotrebu. = Rainwater harvesting system for domestic use. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.

Romac, Petar (2014) Konstrukcijsko rješenje reduktora pogona ventila. = Design solution of valve gearbox. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Rossi, Matija (2014) ROS package for distributed control of networks of dynamical systems. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Andrej.

Rožić, Filip and Rudan, Smiljko (2014) Strukturna analiza kućišta kolotura na jaružaru s grabilicom. = Structural analysis of guide sheave housing on backhoe dredger. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Rožić, Matija (2014) Uređaj za čišćenje graha. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Rožić, Roberto (2014) Izrada potporne strukture kod postupka taložnog očvršćivanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Rudan, Smiljko and Aščić, Blanka (2014) Crashworthiness of type C tanks in LPG ship. = Crashworthiness of type C tanks in LPG ship. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Rujnić-Sokele, Maja and Radić Boršić, Ivana and Barić, Gordana (2014) Water vapour permeability of biodegradable films. = Water vapour permeability of biodegradable films. In: Management of Technology Step to Sustainable production MOTSP 2014, Zagreb, Hrvatska.

Runje, Biserka (2014) Predavanja iz kolegija Teorija i tehnika mjerenja (Skripta). = Lecture Notes for the Course Theory and Measurement Techniques. [Teaching Resource] (Unpublished)

Runje, Biserka (2014) Quality management in the field of corrosion protection coatings. = Quality management in the field of corrosion protection coatings. In: 21. Savjetovanje o zaštiti materijala i industrijskom finišu - KORMAT 2014, 10.04.2014., Zagreb.

Runje, Biserka and Alar, Vesna and Alar, Željko and Stojanović, Ivan and Marković, Marija (2014) The reproducibility of coating thickness measurement results. = The reproducibility of coating thickness measurement results. In: MATRIB 2014 MATERIALS, WEAR, RECYCLING, 26-28.06.2014., Vela Luka, Hrvatska.

Runje, Biserka and Baršić, Gorana and Katić, Marko and Šimunović, Vedran and Horvatić, Amalija (2014) Statistics in metrology. = Statistics in metrology. In: 10th International Conference Laboratory Competence 2014, 15-18.10.2014., Šibenik, Hrvatska.

Runje, Biserka and Baršić, Gorana and Šimunović, Vedran (2014) Praktikum za vježbe iz kolegija Teorija i tehnika mjerenja (Skripta). = Lab Exercises for the Course on Theory and Measurement Techniques. FSB, Zagreb. (Unpublished)

Runje, Biserka and Baršić, Gorana and Šimunović, Vedran and Medić, Srđan (2014) Osiguravanje kvalitete rezultata mjerenja kroz međulaboratorijske usporedbe. = Quality assurance of measurement results through interlaboratory comparisons. In: 14. Hrvatska konferencija o kvaliteti i 5. znanstveni skup Hrvatskog društva za kvalitetu, 15-17.05.2014., Baška, Otok Krk, Hrvatska.

S

Sabol, Mate (2014) Mapiranje proizvodnih procesa poduzeća. = Production processes mapping. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Sakoman, Matija (2014) Tribološka svojstva kompozitne Al2O3 – ZrO2 keramike. = Tribological properties of composite Al2O3 – ZrO2 ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Sakoman, Matija and Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Sladojević, Milan (2014) Erosion mechanisms of slip cast composite Al2O3 - ZrO2 ceramics. = Erosion mechanisms of slip cast composite Al2O3 - ZrO2 ceramics. In: International conference MATRIB 2014 - materials, tribology, recycling, Vela Luka, Hrvatska.

Samaržija, Josip (2014) Mosni granik s grabilicom. = Grabbing overhead travelling crane. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Santo, Monika (2014) Osiguravanje kvalitete rezultata umjeravanja mjerila tlaka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Sarjanović, Ante (2014) Izrada podvodne puške od drvenog slojevitog kompozita. = Production of speargun from laminated wooden composite. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Savić, Marko (2014) Mogućnosti primjene alata poslovne inteligencije u maloserijskoj proizvodnji. = Application of business intelligence tools in the small-series production. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Saxena, Samveg and Vuilleumier, David and Kozarac, Darko and Krieck, Martin and Dibble, Robert and Aceves, Salvador (2014) Optimal operating conditions for wet ethanol in a HCCI engine using exhaust gas heat recovery. = Optimal operating conditions for wet ethanol in a HCCI engine using exhaust gas heat recovery. Applied energy, 116. pp. 269-277. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Saček, Angelo (2014) Optimizacija zatvorenog Rankineova ciklusa s obzirom na dobivenu snagu u odnosu na raspoloživu energiju vrućih ispušnih plinova. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko and Galović, Antun.

Schneider, Daniel Rolph and Guzović, Zvonimir and Duić, Neven (2014) Spaceship Earth – Will we be able to prevail? Question of Sustainability. = Spaceship Earth – Will we be able to prevail? Question of Sustainability. Thermal science, 18 (3). pp. 9-11. ISSN 0354-9836. Vrsta rada: Editorial. Kvartili JCR: Q2 (2014). Točan broj autora: 3.

Schneider, Daniel Rolph and Ragossnig, Arne (2014) Impacts and limitations of recycling. = Impacts and limitations of recycling. Waste management & research, 32 (7). pp. 563-564. ISSN 0734-242X. Vrsta rada: Editorial. Kvartili JCR: Q3 (2014). Točan broj autora: 2.

Sedak-Benčić, Ivan (2014) Analiza materijala cijevi streljačkog oružja. = Analysis of small arms barrel material. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakopčić, Mirko.

Sedić, Almir and Katulić, Stjepko and Pavković, Danijel (2014) Dynamic model of a natural water circulation boiler suitable for on-line monitoring of fossil/alternative fuel plants. = Dynamic model of a natural water circulation boiler suitable for on-line monitoring of fossil/alternative fuel plants. Energy Conversion and Management, 87. pp. 1248-1260. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Segurado, Raquel and Costa, Mário and Duić, Neven and Da Graça Carvalho, Maria (2014) Integrated analysis of energy and water supply in islands. Case study of S. Vicente, Cape Verde. = Integrated analysis of energy and water supply in islands. Case study of S. Vicente, Cape Verde. In: The 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2014, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Senjanović, Ivo and Hadžić, Neven (2014) Potencijali hrvatske brodogradnje. = Potentials of the Croatian shipbuilding industry. In: Razvojni potencijali hrvatskog gospodarstva, 16.10.2014., Zagreb, Hrvatska.

Senjanović, Ivo and Hadžić, Neven and Tomić, Marko and Vladimir, Nikola and Cho, Dae Seung (2014) Analytical and numerical methods for vibration analysis of thick rectangular plates by modified Mindlin theory. = Analytical and numerical methods for vibration analysis of thick rectangular plates by modified Mindlin theory. In: 10th International Conference on Computational Methods in Sciences and Engineering (ICCMSE 2014), 4.-7.04.2014., Atena, Grčka.

Senjanović, Ivo and Hadžić, Neven and Vladimir, Nikola and Cho, Dae Seung (2014) Natural vibrations of thick circular plate based on the modified Mindlin theory. = Natural vibrations of thick circular plate based on the modified Mindlin theory. Archives of Mechanics, 66 (6). pp. 389-409. ISSN 0373-2029. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 4.

Senjanović, Ivo and Hadžić, Neven and Vladimir, Nikola and Xing, Yufeng (2014) Potential theory of in-plane vibrations of rectangular and circular plates. = Potential theory of in-plane vibrations of rectangular and circular plates. International journal for engineering modelling, 27. pp. 69-84. ISSN 1330-1365. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Senjanović, Ivo and Tomić, Marko and Hadžić, Neven (2014) Moving load and beam response. = Moving load and beam response. LAP LAMBERT Academic Publishing, Saarbruecken, Germany, -. ISBN 978-3-659-62951-8

Senjanović, Ivo and Tomić, Marko and Hadžić, Neven (2014) Nonlocal vibration of a carbon nanotube embedded in an elastic medium due to moving nanoparticle analysed by modified Timoshenko beam theory – parametric excitation and spectral response. = Nonlocal vibration of a carbon nanotube embedded in an elastic medium due to moving nanoparticle analysed by modified Timoshenko beam theory – parametric excitation and spectral response. Journal of mechanical behaviour of materials, 23 (3-4). pp. 109-128. ISSN 0334-8938. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Senjanović, Ivo and Tomić, Marko and Vladimir, Nikola and Hadžić, Neven and Malenica, Šime (2014) Hydroelasticity of very large container ships analysed by coupling of 1D structural model and 3D hydrodynamic model. = Hydroelasticity of very large container ships analysed by coupling of 1D structural model and 3D hydrodynamic model. In: Design & Operation of Container Ships, 21-22.05.2014., London, Velika Britanija.

Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung and Choi, Tae Muk (2014) Vibration analysis of thick plates - Analytical and numerical approaches. = Vibration analysis of thick plates - Analytical and numerical approaches. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Senjanović, Ivo and Vladimir, Nikola and Hadžić, Neven (2014) Modeliranje mase metodom Konačnih elemenata u analizi vibracija tankostijenih konstrukcija. = On the mass modelling in vibration analysis of thin-walled structures using the finite element method. International journal for engineering modelling, 27 (1-2). pp. 1-9. ISSN 1330-1365. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Senjanović, Ivo and Vladimir, Nikola and Hadžić, Neven (2014) Modified Mindlin plate theory and shear locking-free finite element formulation. = Modified Mindlin plate theory and shear locking-free finite element formulation. Mechanics Research Communications, 55. pp. 95-104. ISSN 0093-6413. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2014). Točan broj autora: 3.

Senjanović, Ivo and Vladimir, Nikola and Malenica, Šime and Cho, Dae Seung and Kwon, Sun Hong and Choi, Young Myung (2014) Advanced studies on the hydroelasticity of ships and offshore structures within project GCRC-SOP Korea. = Advanced studies on the hydroelasticity of ships and offshore structures within project GCRC-SOP Korea. In: V. Savjetovanje o morskoj tehnologiji in memoriam akademiku Zlatku Winkleru, 22-23.11.2013., Rijeka, Hrvatska.

Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko and Hadžić, Neven and Malenica, Šime (2014) Global hydroelastic analysis of ultra large container ships by improved beam structural model. = Global hydroelastic analysis of ultra large container ships by improved beam structural model. International Journal of Naval Architecture and Ocean Engineering, 6 (4). pp. 1041-1063. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 5.

Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko and Hadžić, Neven and Malenica, Šime (2014) Some aspects of structural modelling and restoring stiffness in hydroelastic analysis of large container ships. = Some aspects of structural modelling and restoring stiffness in hydroelastic analysis of large container ships. Ships and offshore structures, 9 (2). pp. 199-217. ISSN 1744-5302. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2014). Točan broj autora: 5.

Senčič, Bojan and Šolić, Sanja and Leskovšek, Vojteh (2014) Fracture toughness-Charpy impact test-Rockwell hardness regression based model for 51CrV4 spring steel. = Fracture toughness-Charpy impact test-Rockwell hardness regression based model for 51CrV4 spring steel. Materials Science and Technology (United Kingdom), 30 (12). pp. 1500-1505. ISSN 0267-0836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.

Sertić, Tomislav (2014) Određivanje granice stabilnosti aeroelastičnog sustava. = Determination of Dynamic Stability Boundary of Aeroelastic System. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Terze, Zdravko.

Sinanović, Adnan (2014) Sustav osiguravanja kvalitete u proizvodnji zavarivanjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Singer, Sanja and Hari, Vjeran and Singer, Saša (2014) Full block J-Jacobi method for Hermitian matrices. = Full block J-Jacobi method for Hermitian matrices. Linear Algebra and Its Applications, 444. pp. 1-27. ISSN 0024-3795. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.

Sirovica, Ivan (2014) Održavanje ležajeva primjenom SPM metode. = Supervision of bearings condition using SPM method. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Sjerić, Momir (2014) Novi fizikalni pod-modeli simulacije radnog ciklusa ottovog motora. = New physically based sub-models for the cycle-simulation of spark-ignition engine. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Sjerić, Momir and Kozarac, Darko and Taritaš, Ivan (2014) Experimentally supported modeling of cycle-to-cycle variations of Si engine using cycle-simulation model. = Experimentally supported modeling of cycle-to-cycle variations of Si engine using cycle-simulation model. In: SAE 2014 World Congress and Exhibition, 08.-10.04.2014., Detroit, MI; United States.

Sjerić, Momir and Kozarac, Darko and Tomić, Rudolf (2014) Development of a two zone turbulence model and its application to the cycle-simulation. = Development of a two zone turbulence model and its application to the cycle-simulation. Thermal Science, 18 (1). pp. 1-16. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2014). Točan broj autora: 3.

Skendrović, Viktorija (2014) Zaštitno kućište uređaja za izradu ortopedskih uložaka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Skozrit, Ivica and Tonković, Zdenko and Kodvanj, Janoš (2014) The creep and fracture behaviour of the polyethylene PE100. = The creep and fracture behaviour of the polyethylene PE100. In: 12th International Conference on Fracture and Damage Mechanics, FDM 2013, 17-19.09.2013., Sardinia; Italy.

Slamek, Saša (2014) Programska aplikacija za proračun pužnog para. = Application for worm gear pari calculation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Slobodnjak, Jelena (2014) Metode unapređenja proizvodnih procesa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Smiljan, Antun (2014) Konstrukcija elemenata linije za ekstrudiranje polimerne žice. = Design of elements for the extrusion line of the polymer wire. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Smojver, Ivica and Ivančević, Darko (2014) Multiscale Modeling of High Velocity Impact Damage on Composite Structures. = Multiscale Modeling of High Velocity Impact Damage on Composite Structures. In: 2014 SIMULIA Community Conference, 19-22.05.2014., Providence, Rhode Island, SAD.

Smojver, Vladimir (2014) Numeričko modeliranje zaostalih naprezanja u zavarenoj konstrukciji. = Numerical modeling of residual stresse in welded structure. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Smolec, Marko (2014) Projektiranje sustava kuglice na ploči. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.

Smolčić, Juraj (2014) Utjecaj površine implantata na vezu s koštanim cementom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Soldo, Jure (2014) Optimiranje upravljačkog sustava električnog vozila s produljenim dometom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Stanečić, Josip (2014) Karakterizacija PACVD slojeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Stanković, Tomislav (2014) Analiza zamora Končar-vjetroagregata. = Fatigue Analysis of Končar-Windturbine Tower. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Stančić, Mia (2014) Plinski generator ložen biomasom. = Biomass gasifier. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.

Staroveški, Tomislav and Brezak, Danko and Grđan, Vinko and Baček, Tomislav (2014) Medical drill wear classification using servomotor drive signals and neural networks. = Medical drill wear classification using servomotor drive signals and neural networks. In: World Congress on Engineering, WCE 2014, 02-04.07.2014., London, United Kingdom.

Stepanić, Josip and Božić, Jasmina (2014) Techniques of Quality Management in Teams: Brainstorming. = Techniques of Quality Management in Teams: Brainstorming. In: With & Within Complex Systems. Business Systems . BSR Laboratory, Avellino, pp. 30-43. ISBN 1499140436

Stepanić, Josip and Kasać, Josip and Merkač Skok, Marjana (2014) A contribution to considerations of the role of embedded systems. = A contribution to considerations of the role of embedded systems. Business Systems Research Journal, 5 (1). pp. 47-56. ISSN 1847-9375. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Stepanić, Josip and Kasać, Josip and Ćosić Lesičar, Jelena (2014) What is taken for granted about quadrotors: Remarks about drive and communication. = What is taken for granted about quadrotors: Remarks about drive and communication. In: The 3rd International Workshop on Advanced Computational Intelligence and Intelligent Informatics, 18-21.10.2013., Šangaj, Kina.

Stepanić, Josip and Runje, Biserka and Majetić, Dubravko and Alar, Vesna (2014) Extending the lifespan of learning outcomes applicability. = Extending the lifespan of learning outcomes applicability. In: International Professional Conference ME4CataLOgue, 04-05. 2014., Slavonski Brod, Hrvatska.

Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2014) Idea Capacity Assessment for Product Innovation. = Idea Capacity Assessment for Product Innovation. In: 13th International Design Conference DESIGN 2014, 19-22.05.2014., Dubrovnik, Hrvatska.

Stipančić, Filip (2014) Simulacija proizvodnih procesa. = Simulation of production processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Stiperski, Ivan (2014) Klasifikacija istrošenosti alata kod bušenja kamena primjenom umjetne neuronske mreže. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.

Stipić, Tomislav (2014) Strukturna optimizacija velikog putničkog broda u konceptualnoj fazi projekta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Stjelja, Davor (2014) Mjerenje toplinske provodnosti kapljevina. = Measurement of heat conductivity of the liquids. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Stjepić, Ivan (2014) Sustav otprašivanja u tvornici za proizvodnju drvenih zatika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ruševljan, Miroslav.

Stojanović, Ivan and Juraga, Ivan and Alar, Vesna (2014) Influence of drying temperature on protective properties of waterborne and solventborne epoxy coatings. = Influence of drying temperature on protective properties of waterborne and solventborne epoxy coatings. International Journal of Electrochemical Science, 9 (5). pp. 2507-2517. ISSN 1452-3981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.

Stupić, Josip (2014) Bibliobox. = Bibliobox. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Surjak, Martina (2014) Proračun potrošnje primarne energije prodajnog centra. = Calculation of primary energy consumption in shopping mall. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Surma, Robert (2014) Razvoj polimernog kućišta za glazbeni automat. = Development of plastic housing for jukebox. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Svačina, Mario (2014) Grafičko sučelje za rad s neuronskom mrežom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

T

Taritaš, Ivan and Kozarac, Darko and Sjerić, Momir (2014) Numerical study of boosting configurations and valve strategies for high load HCCI engine in wide range of engine speed. = Numerical study of boosting configurations and valve strategies for high load HCCI engine in wide range of engine speed. In: SAE 2014 World Congress and Exhibition, 08.-10.04.2014., Detroit, MI; United States.

Tepeš, Zvonimir (2014) Traktorski priključak za usitnjavanje biljnih ostataka. = Tractor mounted device for chopping of plant remains. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Terbovc, Siniša (2014) Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka. = Design of laboratory bench for calibration of pressue gauges. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Terek, Adriana (2014) Alati vitke i zelene proizvodnje. = Lean and green manufacturing tools. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Terze, Zdravko and Mueller, Andreas and Zlatar, Dario (2014) Redundancy - Free Integration of Rotational Quaternions in Minimal Form. = Redundancy - Free Integration of Rotational Quaternions in Minimal Form. In: The ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2014), 17-20.08.2014., Buffalo, New York, USA.

Terze, Zdravko and Müller, Andreas and Zlatar, Dario (2014) Lie-group integration method for constrained multibody systems in state space. = Lie-group integration method for constrained multibody systems in state space. Multibody System Dynamics. ISSN 1384-5640. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3. (In Press)

Terze, Zdravko and Zlatar, Dario (2014) Numerička integracija rotacijskog tenzora na grupi jediničnih kvaterniona. = Numerical Integration of Rotational Quaternions on Unit Quaternions Group. In: 6. susret Hrvatskog društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Tišljar, Krešimir (2014) Utjecaj orijentacije modela na parametre izrade taložnim očvrščivanjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Tolić, Anto (2014) Utjecaj cijepljenja na promjenu metalografskih i mehaničkih svojstava nodularnog lijeva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Tomašić, Tomislav and Jokić, Andrej and Bakić, Ante (2014) Automated motion of the forerunner mobile manipulator over the tube sheets. = Automated motion of the forerunner mobile manipulator over the tube sheets. In: 23rd International Conference Nuclear Energy for New Europe, 08-11.09.2014., Portorož, Slovenija.

Tomić, Anton (2014) Projektiranje sustava upravljanja suhom dvostrukom spojkom automatskog mjenjača. = Control system design for a dry dual clutch of an automatic transmission. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Tomić, Denis and Degiuli, Nastia (2014) Približna metoda proračuna ukupnog otpora glisera. = An approximate method for total resistance calculation of the planing hulls. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Tomić, Ivan (2014) Matematički model bloka L u TE-TO Zagreb. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Tomić, Marko and Senjanović, Ivo and Ćatipović, Ivan (2014) Polu-spregnuta analiza dinamičkog odziva plutajućeg tijela i sidrenih linija pritegnutih pučinskih platformi. = Floater-tether semi-coupled dynamic response analysis of tension leg platforms. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Tomić, Tanja and Kožuh, Zoran and Kralj, Slobodan and Garašić, Ivica (2014) Određivanje kvalitete laserskog reza na čeliku AISI 316. = Determination of lasers's cut quality on AISI 316 steel. In: Zavarivanje - Welding 2014, Šibenik, Hrvatska.

Tomić, Tanja and Kralj, Slobodan and Kožuh, Zoran (2014) Mathematical model of critical implant stress testing in the weld metal od API 5L X80 steel. = Mathematical model of critical implant stress testing in the weld metal od API 5L X80 steel. Materialwissenschaft und Werkstofftechnik, 45 (11). pp. 470-481. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Tomić, Tihomir (2014) Analiza isplativosti centraliziranog toplinskog sustava na biomasu i komunalni otpad u Zagrebu. = Economic viability of district heating system with biomass and municipal solid waste in the City of Zagreb. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Topalušić, Marko (2014) Šest sigma metodologija i planiranje pokusa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Topličanec, Domagoj (2014) Vjetrom uzrokovane vibracije stupa vjetroagregata. = Wind induced vibrations of the wind turbine tower. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Tota, Damir (2014) Filzikalno-mehanička svojstva zaštitnog premaza na aluminiju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Trapić, Ivan (2014) Razvoj postupka za procjenu opterećenja stupa Končar-vjetroagregata. = Development of an approach to loading assessment of Končar-wind turbine tower. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Travaš, Lovro (2014) Automatsko rasklapanje elektroničkih proizvoda. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Travaš, Lovro and Kunica, Zoran (2014) Automatsko rasklapanje dotrajalih elektroničkih proizvoda. = Automatic disassembly of obsolete electronic products. In: PLIN2014: 12. skup o prirodnom plinu, toplini i vodi ; 5. međunarodni skup o prirodnom plinu, toplini i vodi, 24-26.09.2014., Osijek, Hrvatska.

Trivić, Denis (2014) Pneumatski pogonjena ortoza za stopalo. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Trslić, Petar (2014) Projektiranje i regulacija balansirajućeg sustava pokretanog pneumatskim mišićima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Tudek, Domagoj (2014) Konstrukcija naprave za vježbanje prsne skupine mišića. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Turčić, Hrvoje (2014) Razgradnja organskih tvari u otpadnim vodama pomoću umjetnog i Sunčevog UV zračenja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

U

Uroić, Tessa (2014) Optimizacija cijevnog izmjenjivača topline pri geometrijskim ograničenjima uz nesigurnost podataka. = Optimisation under uncertainty and constraints of a tube bundle heat exchanger. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

V

Vajdić, Goran (2014) Sklapanje u tvornici opreme za rukovanje i transport materijala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Valjak, Filip (2014) Automobilska vijčana dizalica na elektromotorni pogon. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Van Blarigan, Andrew and Kozarac, Darko and Seiser, Reinhard and Chen, J.Y and Cattolica, Robert and Dibble, Robert (2014) Spark-ignited engine NOx emissions in a low-nitrogen oxycombustion environment. = Spark-ignited engine NOx emissions in a low-nitrogen oxycombustion environment. Applied energy, 118. pp. 22-31. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 6.

Varga, Ivan (2014) Uređaji za stavljanje i grijanje čepova na pivske bačve. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Varga, Nikola (2014) Izrada simulacijskog modela Ottovog motora u programu AVL Boost na temelju eksperimentalnih rezultata. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Vedrina, Ines (2014) Alkalni bipolarni elektrolizator. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Firak, Mihajlo.

Vedriš, Matija (2014) Dinamička analiza rastojnika - prigušivača tipa "quad". = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Veršić, Ivan (2014) Primjena metoda reverznog inženjerstva u određivanju položaja elemenata ispitnog postava. = Application of Reverse Engineering Methods for Determination of the Positions of Experimental Setup Elements. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Vidaković, Josip (2014) Inteligentno vođenje robota pomoću stereo-vizijskog sustava. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Videc, Danijel (2014) Razvoj i izrada ortopedskih uložaka PolyJet Matrix postupkom. = Design and production of orthopedic insoles with PolyJet Matrix. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Vidović, Ivan (2014) Optimizacije transportnih ruta poduzeća Županijske ceste d.o.o. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Vidović, Ivan (2014) Suspaljivanje mulja i biomase. = Cofiring of sludge and biomass. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Vidović, Ivan (2014) Utjecaj parametara taložnog učvršćivanja na dimenzijsku stabilnost prototipa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Vince, Fran Zvonimir (2014) Analiza odabranih performansi lakog sportskog zrakoplova temeljem mjerenja iz leta. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Vindiš, Vedran and Virag, Lana and Karšaj, Igor (2014) Implementacija numeričkog modela rasta aneurizme abdominalne aorte u paket za konačne elemente. = The implementation of numerical model of abdominal aortic aneurysm growth in finite element analysis program. In: Šesti susret Hrvatskog društva za mehaniku, 29.-30.05.2014., Rijeka, Hrvatska.

Virag, Lana and Vindiš, Vedran and Wilson, John S. and Karšaj, Igor and Humphrey, Jay D. (2014) Model rasta i restrukturiranja aneurizme abdominalne aorte. = Growth and remodeling model of abdominal aortic aneurysm. In: Šesti skup Hrvatskog društva za mehaniku, 29.-30.05.2014., Rijeka, Hrvatska.

Viskić, Joško and Schauperl, Zdravko and Ćatić, Amir and Balog, Martin and Krizik, Petar and Gržeta, Biserka and Popović, Jasminka and Milardović Ortolan, Slađana and Mehulić, Ketij (2014) Utjecaj obrade erozimatom na mikrostukturu površine titana dobivenog metalurgijom praha. = Effects of wire EDM on the microstructure of P/M titanium samples. Acta stomatologica Croatica, 48 (4). pp. 285-291. ISSN 0001-7019. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 9.

Vitasović, Matej (2014) Statička neuronska mreža s unipolarnom sigmoidalnom i Gaussovom aktivacijskom funkcijom. = Static neural network with unipolar sigmoid and Gaussian activation function. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.

Višić, Ivan (2014) Nošena traktorska prskalica. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Vladimir, Nikola and Šestan, Ante and Ančić, Ivica and Prosinečki, Tomislav (2014) Strength assessment of two-stroke marine diesel engine piston rings in the mounting procedure. = Strength assessment of two-stroke marine diesel engine piston rings in the mounting procedure. In: Twelfth International Conference on Marine Sciences and Technologies - Black Sea 2014, 25-27.09.2014., Varna, Bugarska.

Vlahović, Zoran (2014) Mehanizam za manipulaciju kantama za odlaganje smeća. = The mechanism for handling with dustbins. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Vojvodić, Andreja Leonela (2014) Podešavanje parametara prerade kod taložnog očvršćivanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Volarić, Davor (2014) Analiza otpornosti na sudar spremnika tipa C na LPG brodu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.

Vranek, Lovro (2014) Karakterizacija Ti dobivenog metalurgijom praha. = Characterisation of powder metallurgy Titanium. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Vranješ, Ozren (2014) Analiza uzdužne statičke i dinamičke stabilnosti putničkog hidroaviona. = Analysis of longitudinal static and dynamic stability for commuter floatplane. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Vranković, Nikola and Kranjčević, Nenad and Stegić, Milenko (2014) New Method for Solving Vibration Systems with Clearances. = New Method for Solving Vibration Systems with Clearances. In: 17th U.S. National Congress on Theoretical and Applied Mechanics, 15-20.06.2014., East Lansing MI, SAD.

Vrbljanin, Vjekoslav (2014) Dinamička analiza rastojnika-prigušivača tipa „triple“. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Vrdoljak, Milan and Vuković, Danijel and Rašić, Josip (2014) O utjecaju promjenjivog stanja atmosfere iznad požarišta na performanse helikoptera. = On the influence of the changing state of the atmosphere above the fire site on performance of the helicopter. Vatrogastvo i upravljanje požarima, 4 (2). pp. 37-45. ISSN 1848-347X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Vuger, Petar Krešimir (2014) Matematički model dinamike procesa u spremniku latentne topline. = Mathematical model of process dynamics in latent heat storage. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Vuglač, Tomislav (2014) Metode poboljšanja karakteristika modernih numeričkih upravljanih alatnih strojeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Vuilleumier, David and Kozarac, Darko and Mehl, Marco and Saxena, Samveg and Pitz, William J. and Dibble, Robert W. and Chen, Jyh-Yuan and Sarathy, Mani S. (2014) Intermediate temperature heat release in an HCCI engine fueled by ethanol/n-heptane mixtures: An experimental and modeling study. = Intermediate temperature heat release in an HCCI engine fueled by ethanol/n-heptane mixtures: An experimental and modeling study. Combustion and flame, 161 (3). pp. 680-695. ISSN 0010-2180. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 8.

Vuić, Dario (2014) Primjena kompozita ojačanih ugljičnim vlaknima u automobilskoj industriji. = Ugljična vlakna; ojačalo; kompoziti; recikliranje; proizvodnja. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Vujanović, Milan and Petranović, Zvonimir and Duić, Neven (2014) Modelling of Hot Diesel Injection Process Using Eulerian Multiphase Method. = Modelling of Hot Diesel Injection Process Using Eulerian Multiphase Method. In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment System, 29.06-03.07.2014, Ohrid, Makedonija.

Vujanović, Milan and Petranović, Zvonimir and Duić, Neven and Baleta, Jakov (2014) Modelling of diesel injection process using Eulerian multiphase approach. = Modelling of diesel injection process using Eulerian multiphase approach. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES 2014S, 20-27.09.2014., Venecija, Italija - Istanbul, Turska.

Vuk, Tomislav (2014) Informacijski sustavi za upravljanje tehničkom dokumentacijom. = Information systems for management of technical documentation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Vukelić, Josipa (2014) Performanse helikoptera u autorotaciji. = Helicopter Performance in Autorotation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Vukelić, Sandra (2014) Cross-docking u skladištenju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Vukušić, Ivana (2014) Usporedba mehaničkih svojstava kompozita ojačanih prirodnim i staklenim vlaknima. = Comparison of mechanical properties of composites reinforced with natural and glass fiber. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Vukčević, Vuko and Jasak, Hrvoje (2014) A Conservative Level Set method for interface capturing in two-phase flows. = A Conservative Level Set method for interface capturing in two-phase flows. In: 11th. World Congress on Computational Mechanics - WCCM XI 5th. European Congress on Computational Mechanics - ECCM V 6th European Congress on Computational Fluid Dynamics - ECFD VI, 20-25.07.2014., Barcelona; Spain.

Vukčević, Vuko and Jasak, Hrvoje (2014) OpenFOAM u brodskoj hidrodinamici. = OpenFOAM in Marine Hydrodynamics. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Vukčević, Vuko and Jasak, Hrvoje (2014) Primjena Naval Hydro Paketa za Dvofazna Strujanja. = In: Šesti susret Hrvatskoga društva za mehaniku, 29-30.05.2014., Rijeka, Hrvatska.

Vurnek, Vjekoslav (2014) Materijali za izgradnju ribarske brodice. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.

Vusić, Filip (2014) Zavarljivost čelika visoke čvrstoće. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

W

Wiedemair, Wolfgang and Tuković, Željko and Jasak, Hrvoje and Poulikakos, Dimos and Kurtcuoglu, Vartan (2014) Modeling the interaction of microbubbles: Effects of proximity, confinement, and excitation amplitude. = Modeling the interaction of microbubbles: Effects of proximity, confinement, and excitation amplitude. Physics of Fluids, 26 (6). ISSN 1070-6631. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 5.

Z

Zadelj, Ivan (2014) Lijevanje remenice od aluminijske legure. = Casting of aluminium alloy pulley. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Zahirović, Damir (2014) Konstrukcija i certificiranje kompozitnog krila posebne namjene. = Design and certification of composite wing for special applications. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.

Zaimović, Gianluca (2014) Programiranje PLC-a za proizvodnju štapnog limitera. = PLC programming for the production of rod limiter. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Zajec, Tihana (2014) Tehnike projektnog menadžmenta. = Project management tehnics. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Zajec, Tomislav (2014) Uređaj za obradu krajeva cijevi snopa izmjenjivača topline. = Device for machining pipe endsof a heat exchanger tube bundle. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Zaman, Viktor (2014) Analiza sastava, mogućnosti korištenja te utjecaja na okoliš peleta izrađenih od drvnog ostatka. = Analysis of the composition, the possibilities of using and environmental impact of pellets made of wood residues. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Završki, Damir (2014) Primjena kompozita u automobilu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Filetin, Tomislav.

Zhang, Kai and Kuang, Tangqing and Liu, Hesheng and Zeng, Xiaoshu and Deng, Yang and Jasak, Hrvoje (2014) Simulation and analysis of mold filling in water-assisted injection molding of viscoelastic polymers. = Simulation and analysis of mold filling in water-assisted injection molding of viscoelastic polymers. Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 30 (9). pp. 93-96. ISSN 1000-7555. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

Zhao, Guoying and Alujević, Neven and Depraetere, Bruno and Pinte, Gregory and Swevers, Jan and Sas, Paul (2014) Active structural acoustic control of rotating machinery using piezo-based rotating inertial actuators. = Active structural acoustic control of rotating machinery using piezo-based rotating inertial actuators. In: International Conference on Noise and Vibration Engineering, ISMA, 15.-17.09.2014., Leuven, Belgija.

Zidarić, Karlo (2014) Zavarivanje raznorodnih čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Zlopaša, Hinko (2014) Primjena simulacijskog modeliranja u procesu gradnje objekata morske tehnike. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Zoričić, Filip (2014) Dinamička izdržljivost tibijalnog čavla. = Fatigue strength of tibial nail. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Zoričić, Mate (2014) Otpornost čelika X155CrVMo-12 na abrazivnu eroziju česticama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Zrakić, Igor (2014) Utjecaj orijentacije modela na kvalitetu površine kod postupka taložnog očvršćivanja. = Influence of model orientation on the surface quality manufactured by fused deposition modeling. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Zrilić, Davorin (2014) Analiza detalja konstrukcije kolica pilona broda za jaružanje u konceptualnoj fazi projekta. = Analysis of the structural details in the concept design of a dredger ship spud carrier. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Ć

Ćatipović, Ivan and Degiuli, Nastia and Werner, Andreja and Čorić, Većeslav and Radanović, Jadranka (2014) Approximation of Towline Influence on Towed Ship Motions. = Approximation of Towline Influence on Towed Ship Motions. In: 2nd International Conference on Maritime Technology and Engineering, MARTECH 2014, 15.-17.10.2014., Lisbon, Portugal.

Ćatipović, Ivan and Degiuli, Nastia and Werner, Andreja and Čorić, Većeslav and Radanović, Jadranka (2014) Numerical model of towing line in sea transport. = Numerical model of towing line in sea transport. In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Ćatipović, Ivan and Degiuli, Nastia and Čorić, Većeslav and Werner, Andreja and Slapničar, Vedran and Radanović, Jadranka (2014) Dinamika broda u teglju. = Dynamics of a ship in towage. In: 21. Simpozij Teorija i praksa brodogradnje (In memoriam prof. Leopold Sorta), SORTA 2014, 2. - 4. listopad 2014., Baška, otok Krk, Hrvatska.

Ćorak, Maro and Parunov, Joško and Guedes Soares, Carlos (2014) Short-term probabilistic combination of wave and whipping bending moments. = Short-term probabilistic combination of wave and whipping bending moments. In: 2nd International Conference on Maritime Technology and Engineering MARTECH 2014, 15-17.10.2014., Lisabon, Portugal.

Ćorić, Danko (2014) Smart materials. = Smart materials. In: International Conference on Materials, Tribology, Recycling, MATRIB '14, 26-28.06.2014., Vela Luka, Hrvatska.

Ćosić, Predrag (2014) Machine Tools Selection Using AHP Method and Multiobjective Optimization. = Machine Tools Selection Using AHP Method and Multiobjective Optimization. In: 2nd International Scientific Conference COMETa2014, Conferenceon Mechanical Engineering Technology and Applications, 2.-5.12.2014., Istočno Sarajevo, Bih.

Ćurković, Lidija and Bolanča, Tomislav and Šiljeg, Mario and Foglar, Lucija (2014) The kinetic modelling of Fe3 + ion uptake by zeolite from water. = The kinetic modelling of Fe3 + ion uptake by zeolite from water. Indian journal of chemical technology, 21. pp. 56-62. ISSN 0971-457X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Ćurković, Lidija and Ljubas, Davor and Šegota, Suzana and Bačić, Ivana (2014) Photocatalytic degradation of Lissamine Green B dye by using nanostructured sol-gel TiO2 films. = Photocatalytic degradation of Lissamine Green B dye by using nanostructured sol-gel TiO2 films. Journal of Alloys and Compounds, 604. pp. 309-316. ISSN 0925-8388. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.

Ćurković, Lidija and Vugrinčić, Amalija and Bačić, Ivana and Majić Renjo, Marijana and Grilec, Krešimir and Šegota, Suzana (2014) AFM analysis of mixed TiO2 – ZrO2 (1:1) sol – gel films on stainless steel substrate. = AFM analysis of mixed TiO2 – ZrO2 (1:1) sol – gel films on stainless steel substrate. In: 18th international research/expert conference "Trends in the development of machinery and associated technology" TMT 2014, 10.-12.09.2014., Budimpešta, Mađarska.

Ćustić, Lamia (2014) Proračun poniranja i posrtanja na harmonijskim valovima vrpčastom metodom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čorić, Većeslav.

Č

Čabradi, Bojan (2014) Konstrukcija mehanizma školske stolice za dinamičko sjedenje. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Čakširan, Marko (2014) Tehno- ekonomska analiza prometa na europskim unutarnjim plovnim putovima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žiha, Kalman.

Čanžar, Predrag and Tonković, Zdenko (2014) Nodular cast iron - Fatigue crack measurement and simulation. = Nodular cast iron - Fatigue crack measurement and simulation. Key Engineering Materials, 577-57. pp. 473-476. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Čavužić, Matko (2014) Utjecaj kaolina na zaštitna svojstva vodorazrjedivog premaza. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Čavužić, Zoran (2014) Temeljni premazi. = Shop primers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.

Čeh, Nikola (2014) Traktorski priključak za podrezivanje korijena voćaka. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Čeralinac, Zoran and Alar, Vesna and Martinez, Sanja (2014) Otpornost na trošenje niklane prevlake modificirane nanočesticama. = In: 21. Savjetovanje o zaštiti materijala i industrijskom finišu - KORMAT 2014 = Proceedings : 21. Savjetovanje o zaštiti materijala i industrijskom finišu - KORMAT 2014 = 21th Conference of materials protection and industrial finish (382nd Event of the Europ, 10.04.2014., Zagreb.

Čeralinac, Zoran and Alar, Vesna and Martinez, Sanja (2014) Otpornost na trošenje niklene prevlake modificirane nanočesticama. = Wear resistance of nickel coating modified with nanoparticles. In: 21. savjetovanje o zaštiti materijala i industrijskom finišu,, 10.04.2014, Zagreb, Hrvatska.

Čorić, Većeslav and Ćatipović, Ivan and Slapničar, Vedran (2014) Floating crane response in sea waves. = Floating crane response in sea waves. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 65 (2). pp. 111-122. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 3.

Čukelj, Fabijan and Knezević, Josip and Kodvanj, Janoš and Bandalović, Ante and Ostojić, Marko and Bilan, Kanito and Pavić, Andrej (2014) Computer representation of osteosynthesis stability in locking plates used for the treatment of osteoporotic proximal humerus fractures. = Computer representation of osteosynthesis stability in locking plates used for the treatment of osteoporotic proximal humerus fractures. Psychiatria Danubina, 26. pp. 14-19. ISSN 0353-5053. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 7.

Đ

Đambić, Matija (2014) Termoelektrana s nultim emisijama CO2 za CCS tehnologiju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Đukić, Ankica (2014) Autonomous hydrogen production system. = Autonomous hydrogen production system. In: International Conference on Clean Energy, 8-12.6.2014., Istanbul, Turska.

Š

Šabalja, Tomislav (2014) Analiza podmornice Typhoon klase. = Analysis of Typhoon class submarine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Slapničar, Vedran.

Šabalja, Tomislav and Senjanović, Ivo and Hadžić, Neven (2014) Projektiranje konstrukcije podmornice klase Typhoon. = Structural design of a Typhoon class submarine. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Šalamon, Mateja and Degiuli, Nastia (2014) Eksperimentalno određivanje otpora serije brzih poludeplasmanskih katamarana. = Experimental determination of resistance of high speed semi-displacement catamaran series. In: XXI. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta = The 21st symposium Theory and practice shipbuilding, in memoriam prof. Leopold Sorta, 02-04.10.2014., Baška; Croatia.

Šantek, Denis (2014) Stroj za čišćenje koštica buće nakon ispiranja. = Pumpking seeds cleaning machine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Šapina, Matea (2014) Primjena NiTi slitina u medicini. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Šarić, Ivan (2014) Održavanje malih zrakoplova. = Maintenance of small aircraft. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Šarkanj, David (2014) Laka vatrogasne prikolica za gašenje šumskih požara. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Šekoranja, Bojan and Bašić, Denis and Švaco, Marko and Šuligoj, Filip and Jerbić, Bojan (2014) Human-robot interaction based on use of capacitive sensors. = Human-robot interaction based on use of capacitive sensors. In: 2013 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 23-26.10.2013., Zadar; Croatia.

Šercer, Mladen and Rujnić-Sokele, Maja (2014) Utjecaj razgradljive plastike na svojstva plastičnih reciklata. = Effect of degradable plastics on the properties of plastic recyclates. In: Zaštita okoliša i održivo gospodarenje resursima, Zagreb, Hrvatska.

Šerić, Marko (2014) Pneumatska preša za grožđe. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Šikić, Bruno (2014) Razvoj uređaja za ispitivanje instrumentacijskih cijevi na dnu reaktorske posude. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Šikić, Zvonimir (2014) What is probability and why does it matter. = What is probability and why does it matter. European Journal of Analytic Philosophy, 10 (1). pp. 21-43. ISSN 1845-8475. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Šimeg, Lana (2014) Primjena elektronske mikroskopije u karakterizaciji prirodnih materijala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Šimić, Augustino (2014) Vizualizacija gibanja helikopterskog rotora uz interaktivno upravljanje. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Šimunek, Josip (2014) Deformacija očne ovojnice. = Deformation of the eye membrane. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Šimunović, Vedran (2014) Utjecaj mjernih postupaka na rezultat mjerenja srednjeg promjera navoja. = Influence of measurement procedures on measurement results of pitch diameter. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.

Šitum, Željko and Ciković, Zoran (2014) Optimization of control parameters for servo hydraulic systems using genetic algorithms. = Optimization of control parameters for servo hydraulic systems using genetic algorithms. Ventil, 20 (3). pp. 198-204. ISSN 1318-7279. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Šitum, Željko and Žilić, Tihomir and Milić, Vladimir (2014) Improving performance of a hydraulic press with real-time nonlinear control. = Improving performance of a hydraulic press with real-time nonlinear control. In: 9th International Fluid Power Conference (9th IFK), 24-26.03.2014., Aachen, Njemačka.

Škec, Stanko and Štorga, Mario (2014) Intelectual Capital Dynamics. = Intelectual Capital Dynamics. EUREKA 8723 VISINEV projekt.

Škec, Stanko and Štorga, Mario (2014) Mapping Risk Indicators on Product Development Process. = Mapping Risk Indicators on Product Development Process. EUREKA 8723 VISINEV projekt.

Škec, Stanko and Štorga, Mario (2014) Network Analysis of Intellectual Capital Performance Indicators and Work Sampling App Specification. = Network Analysis of Intellectual Capital Performance Indicators and Work Sampling App Specification. EUREKA E8723 VISINEV project.

Škec, Stanko and Štorga, Mario and Rohde, Danijel and Marjanović, Dorian (2014) Tailoring risk management approach for the product development environment. = Tailoring risk management approach for the product development environment. In: DESIGN 2014 Conference, 19-22.05.2014., Dubrovnik, Croatia.

Škorić, Stephan (2014) Izbor prikladnog plana pokusa za istraživanje sila rezanja. = Selection of adequate experiment plan for research into cutting forces. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škorić, Stephan.

Škugor, Branimir and Cipek, Mihael and Deur, Joško (2014) Control variables optimization and feedback control strategy design for the blended operating regime of an extended range electric vehicle. = Control variables optimization and feedback control strategy design for the blended operating regime of an extended range electric vehicle. SAE International Journal of Alternative Powertrains, 3 (1). pp. 152-162. ISSN 2167-4191. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Škugor, Branimir and Deur, Joško (2014) Dynamic programming-based optimisation of charging an electric vehicle fleet system represented by an aggregate battery model. = Dynamic programming-based optimisation of charging an electric vehicle fleet system represented by an aggregate battery model. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems, 20-27.10.2014., Venecija-Istanbul.

Škugor, Branimir and Deur, Joško (2014) Dynamic programming-based optimization of electric vehicle fleet charging. = Dynamic programming-based optimization of electric vehicle fleet charging. In: 2014 IEEE International Electric Vehicle Conference (IEVC), 17-19.12.2014., Firenca, Italija.

Škugor, Branimir and Deur, Joško (2014) A novel model of electric vehicle fleet aggregate battery for energy planning studies. = A novel model of electric vehicle fleet aggregate battery for energy planning studies. In: 9th Conference on Sustainable Development of Energy, Water and Environment Systems, 20-27.10.2014., Venecija-Istanbul.

Škugor, Branimir and Deur, Joško and Cipek, Mihael and Pavković, Danijel (2014) Design of a power-split hybrid electric vehicle control system utilizing a rule-based controller and an equivalent consumption minimization strategy. = Design of a power-split hybrid electric vehicle control system utilizing a rule-based controller and an equivalent consumption minimization strategy. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 228 (6). pp. 631-648. ISSN 0954-4070. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2014). Točan broj autora: 4.

Škugor, Branimir and Ranogajec, Vanja and Deur, Joško (2014) On smoothing HEV/EREV supervisory control action using an extended ECMS approach. = On smoothing HEV/EREV supervisory control action using an extended ECMS approach. In: 27th World Electric Vehicle Symposium and Exhibition, EVS 2014, 17-20.11.2013., Barcelona; Spain.

Škugor, Luka (2014) Stabilnost osteosinteze pločicom na zaključavanje kod prijeloma distalnog radijusa. = Stability of fixation of distal radius fracture using locking plate. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Škurić, Vanja (2014) Optimizacija cijevnog izmjenjivača topline po višestrukim funkcijama cilja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Šnajdar Musa, Mateja and Schauperl, Zdravko (2014) Utilizing equal channel angular pressing for titanium powder consolidation. = Utilizing equal channel angular pressing for titanium powder consolidation. In: 15. međunarodna konferencija MATRIB 2014: Materijali, tribologija, recikliranje, Vela Luka, Hrvatska.

Šokčević, Tomislav (2014) Kinematska analiza kardanskog zgloba. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Šolić, Sanja and Kolednjak, Davor and Schauperl, Zdravko (2014) Utjecaj parametara zavarivanja na mikrostrukturu zavarenog spoja HSLA čelika API 5L X80. = In: 40-to međunarodno savjetovanje Zavarivanje - Welding 2014, Šibenik, Hrvatska.

Šolić, Sanja and Schauperl, Zdravko and Papa, Tihomir (2014) Utjecaj toplinske obrade na tribološka svojstva kalupnih materijala za staklarsku industriju. = Influence of heat treatment on tribological properties of mold materials for glass industry. In: 15. međunarodna konferencija MATRIB 2014: Materijali, tribologija, recikliranje, Vela Luka, Hrvatska.

Šoštar, Marko (2014) Zaštita od korozije konstrukcije Formule Student. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.

Španić, Vladimir (2014) Konstrukcijsko rješenje uređaja za zavarivanje spremnika. = Design solution of machine for welding tanks. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.

Špoljar, Marko (2014) Primjena polimernih kompozita u automobilima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Špoljarić, Marko (2014) Projektiranje helikoptera za potrebe hitne medicinske pomoći. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Šramek, Mislav (2014) Traktorska freza. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Štefanić, Igor (2014) Prenosivi CNC plameni rezač čeličnih ploča. = Mobile CNC gas cutting machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Števinović, Tihomir (2014) Protupožarni premaz. = Fire retardant coating. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Štorga, Mario and Marjanović, Dorian and Škec, Stanko (2014) Rethinking Product Development Education Stream Within an E-Learning Environment. = Rethinking Product Development Education Stream Within an E-Learning Environment. In: European Distance and E-learning Network (EDEN) Annual Conference 2014, 10-13.06.2014., Zagreb, Hrvatska.

Štorga, Mario and Škec, Stanko (2014) Intellectual Capital Performance Indicators for Complex Project Management. = Intellectual Capital Performance Indicators for Complex Project Management. In: International Conference on Advanced Design Research and Education ICADRE 14, 16-18.07.2014., Singapur, Singapur.

Šuler, Matija (2014) Mikrobiološko poticanje korozijskih oštećenja na konstrukcijama od nehrđajućih čelika u vodi. = Microbiologically influenced corrosion damages on stainless steel structures in water. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.

Šuligoj, Filip and Šekoranja, Bojan and Švaco, Marko and Jerbić, Bojan (2014) Object Tracking with a Multiagent Robot System and a Stereo Vision Camera. = Object Tracking with a Multiagent Robot System and a Stereo Vision Camera. In: 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013, 23.-26.10.2013., Zadar, Hrvatska.

Šunjo, Karlo (2014) Numeričke simulacije stlačivog strujanja fluida korištenjem spregnutog algoritma. = Numerical Simulation of Compressible Flows using a Coupled Density-based Solution Algorithm. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

Šućur, Nada (2014) Trošenje klipnjače koljenastog vratila dvotaktnog motora s vanjskim paljenjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Švaco, Marko and Jerbić, Bojan and Šuligoj, Filip (2014) ARTgrid: a two-level learning architecture based on adaptive resonance theory. = ARTgrid: a two-level learning architecture based on adaptive resonance theory. Advances in Artificial Neural Systems, 2014. pp. 1-9. ISSN 1687-7594. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Švaco, Marko and Jerbić, Bojan and Šuligoj, Filip (2014) Autonomous robot learning model based on visual interpretation of spatial structures. = Autonomous robot learning model based on visual interpretation of spatial structures. Transactions of FAMENA, 38 (4). pp. 13-28. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 3.

Švaco, Marko and Šekoranja, Bojan and Šuligoj, Filip and Jerbić, Bojan (2014) Calibration of an industrial robot using a stereo vision system. = Calibration of an industrial robot using a stereo vision system. In: 2013 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 23-26.10.2013., Zadar; Croatia.

Švigir, Dominik (2014) Analiza oblikovanja ispušnog sustava plinske turbine. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Ščurić, Ivan (2014) Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva. = Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Ž

Žakula, Tea and Armstrong, Peter and Norford, Leslie (2014) Modeling Environment for Model Predictive Control of Buildings. = Modeling Environment for Model Predictive Control of Buildings. Energy and buildings, 85. pp. 549-559. ISSN 0378-7788. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Žakula, Tea and Balen, Igor and Šimić, Ivan (2014) Hybrid cooling of a container for telecommunication equipment. = Hybrid cooling of a container for telecommunication equipment. In: 45th International Congress on Heating, Refrigeration and Air-Conditioning - KGH, 03.-05.12.2014, Beograd, Srbija.

Žanetić, Ivan (2014) Traktorski priključak za košnju i usitnjavanje-malčer. = Tractor mounted mulcher. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Žanić, Vedran and Pirić, Karlo and Prebeg, Pero (2014) Ship structural design support methodology for the reliability based design optimization (RBDO). = Ship structural design support methodology for the reliability based design optimization (RBDO). In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 08-13.06.2014., San Francisco; United States.

Žarko, Ana (2014) Analiza uzdužne granicne čvrstoće trupa broda oštećenog u sudaru. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Žegrec, Matija (2014) Konstrukcijsko rješenje sklopivog stambenog kontejnera. = Design solution of a dismountable residential container. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Žgela, Bruno (2014) Proračun generatora pare sa izgaranjem otpadne biomase u fluidiziranom sloju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.

Žiha, Kalman (2014) Cause-and-Effect Interactions in Natural Sciences. = Cause-and-Effect Interactions in Natural Sciences. Journal of Pensee, 76 (3). Part 3. ISSN 0031-4773. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Žiha, Kalman (2014) Plasticity and binding energy interactions. = Plasticity and binding energy interactions. In: Multi-scale Modeling and Plasticity Characterization of Advanced Materials, 3-8.01.2014., Freeport, Bahamas.

Žiher, Ante (2014) Analiza utjecaja izgradnje fotonaponskih sustava na opterećenje elektroenergetskog sustava i cijenu električne energije na otoku Korčuli. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Žilić, Tihomir and Kasać, Josip and Šitum, Željko and Essert, Mario (2014) Application of SSTT control algorithm for underactuated: Surface vessel, PPR manipulator and pneumatically actuated slider-inverted pendulum. = Application of SSTT control algorithm for underactuated: Surface vessel, PPR manipulator and pneumatically actuated slider-inverted pendulum. Advanced Robotics, 28 (8). pp. 545-556. ISSN 0169-1864. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2014). Točan broj autora: 4.

Žinić, Dominik (2014) Notifikacijska narukvica s električnim stimulatorom mišića. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zorc, Davor.

Živić, Marija and Galović, Antun (2014) Entropijska produkcija pri stacionarnom provodenju topline kroz stijenku cilindra s toplinskim izvorom. = Entropy generation in steady heat conduction through a cylinder wall with internal heat generation. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 21 (5). pp. 1103-1108. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 2.

Živić, Marija and Galović, Antun and Virag, Zdravko (2014) Detailed analysis of the effect of the turbine and compressor isentropic efficiency on the thermal and exergy efficiency of a Brayton cycle. = Detailed analysis of the effect of the turbine and compressor isentropic efficiency on the thermal and exergy efficiency of a Brayton cycle. Thermal Science, 18 (3). pp. 843-852. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.

Živković, Dario (2014) Računalne simulacije disperzije štetnih tvari u atmosferi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje.

Žulić, Antun (2014) Kalibrator sjemenskog krumpira. = Calibrator for seed potatoes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Župan, Josip and Filetin, Tomislav and Landek, Darko (2014) Analysis of the quenching oil' s cooling curves with agitation and with addition of nanoparticles. = Analysis of the quenching oil' s cooling curves with agitation and with addition of nanoparticles. In: European Conference on Heat Treatment and 21st IFHTSE Congress, Minhen, Njemačka.

Župan, Josip and Filetin, Tomislav and Landek, Darko (2014) Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles. = Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.

Župan, Josip and Landek, Darko and Filetin, Tomislav (2014) Cooling characteristics of water based nanofluids with agitation. = Cooling characteristics of water based nanofluids with agitation. Materials Performance and Characterization, 3 (4). pp. 326-336. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

This list was generated on Sun Sep 23 06:25:30 2018 CEST.