  |
 | Up a level |
Krznar, Nino and Pilipović, Ana and Šercer, Mladen (2016) Additive manufacturing of fixture for automated 3D scanning - case study. = Additive manufacturing of fixture for automated 3D scanning - case study. Procedia Engineering, 149. pp. 197-202. ISSN 1877-7058. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Pilipović, Ana and Valentan, Bogdan and Šercer, Mladen (2016) Influence of SLS processing parameters according to the new mathematical model on flexural properties. = Influence of SLS processing parameters according to the new mathematical model on flexural properties. Rapid prototyping journal, 22 (2). pp. 258-268. ISSN 1355-2546. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Godec, Damir and Šercer, Mladen (2015) Aditivna proizvodnja. = Additive manufacturing. Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-26-6
Rujnić-Sokele, Maja and Šercer, Mladen (2015) Biodegradable Plastics – Challenges and Opportunities. = Biodegradable Plastics – Challenges and Opportunities. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, Dubrovnik, Hrvatska.
Surma, Robert and Šercer, Mladen and Pilipović, Ana (2015) Designing and production of polymer product with fused deposition modeling – case study. = Designing and production of polymer product with fused deposition modeling – case study. In: 15th International Scientific Conference on Production Engineering, Vodice, Hrvatska.
Raos, Pero and Stojšić, Josip and Šercer, Mladen and Pilipović, Ana (2015) Effects of compounding conditions on flexural properties of polyamide 12 / clay nanocomposites. = Effects of compounding conditions on flexural properties of polyamide 12 / clay nanocomposites. In: International Conference on Innovative Technologies (IN-TECH 2015), Dubrovnik, Hrvatska.
Godec, Damir and Vidović, Ivan and Šercer, Mladen (2015) Optimiranje parametara niskobudžetnog 3D tiskanja. = Parameters optimization of low - cost 3D printing. Tehničke znanosti : glasnik Akademije tehničkih znanosti Hrvatske, 19 (1). pp. 3-8. ISSN 1330-7207. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Godec, Damir and Radoš, Ivan and Šercer, Mladen (2015) Performance comparison of low - budget 3D printers. = Performance comparison of low - budget 3D printers. In: Regional Conference Polymer Processing Society Graz 2015, PPS2015, Graz, Austrija.
Krznar, Nino and Šercer, Mladen and Pilipović, Ana (2015) Razvoj i izrada polimernog proizvoda pomoću taložnog očvršćivanja. = Development and production of polymer product with fused deposition modeling. Tehničke znanosti : glasnik Akademije tehničkih znanosti Hrvatske, 19 (1). pp. 9-15. ISSN 1330-7207. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2015) Study on thermal properties of synthetic and bio - based polyurethane. = Study on thermal properties of synthetic and bio - based polyurethane. Thermal science, 19 (3). pp. 915-922. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Legutko, Stanislaw and Lyczko, Kazimierz and Słonina, Lukasz and Šercer, Mladen (2014) Computer-aided design of embossing taps. = Computer-aided design of embossing taps. Transactions of FAMENA, 38 (3). pp. 81-94. ISSN 1333-1124. . .
Raos, Pero and Stojšić, Josip and Šercer, Mladen and Pilipović, Ana (2014) Effects of compounding conditions on tensile properties of polyamide 12 / clay nanocomposites. = Effects of compounding conditions on tensile properties of polyamide 12 / clay nanocomposites. In: International Conference on Innovative Technologie s, IN‐TECH 2014, Leiria, Portugal.
Pilipović, Ana and Drstvenšek, Igor and Šercer, Mladen (2014) Mathematical model for the selection of processing parameters in selective laser sintering of polymer products. = Mathematical model for the selection of processing parameters in selective laser sintering of polymer products. Advances in Mechanical Engineering, 2014. pp. 1-9. ISSN 1687-8132. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Pilipović, Ana and Šercer, Mladen and Radić-Boršić, Ivana (2014) Processing and Properties of Marine Biodegradable plastics. = Processing and Properties of Marine Biodegradable plastics. In: Gospodarski forum GOF 2014, Šibenik, Solaris, Hrvatska.
Šercer, Mladen and Rujnić-Sokele, Maja (2014) Utjecaj razgradljive plastike na svojstva plastičnih reciklata. = Effect of degradable plastics on the properties of plastic recyclates. In: Zaštita okoliša i održivo gospodarenje resursima, Zagreb, Hrvatska.
Videc, Danijel and Šercer, Mladen and Pilipović, Ana (2013) Colouring of polymer products manufacturing by selective laser sintering. = Colouring of polymer products manufacturing by selective laser sintering. In: 14th International Scientific Conference on Production Engineering, Biograd, Hrvatska.
Šercer, Mladen and Raos, Pero and Radić-Boršić, Ivana (2013) Development of Water Biodegradable PHA Films. = Development of Water Biodegradable PHA Films. In: 29th International Conference of the Polymer Processing Society, Nuremberg, Njemačka.
Godec, Damir and Raos, Pero and Šercer, Mladen (2013) Importance of Rapid Prototyping in Polymer Product Development. = Importance of Rapid Prototyping in Polymer Product Development. In: International Congress on Engineering and Technology ICET 2013, Dubrovnik, Hrvatska.
Landek, Darko and Šercer, Mladen and Rujnić-Sokele, Maja and Alar, Vesna and Bauer, Branko and Godec, Damir and Juraga, Ivan and Keran, Zdenka and Kožuh, Zoran and Math, Miljenko and Mihalic, Ivana and Pilipović, Ana and Stojanović, Ivan and Šimunović, Vinko (2013) Materijali i proizvodni postupci. = Materials and production. [UNSPECIFIED]
Raos, Pero and Stojšić, Josip and Šercer, Mladen and Pilipović, Ana and Somolanji, Marija (2013) Mechanical properties of polyamide 12 / clay nanocomposites. = Mechanical properties of polyamide 12 / clay nanocomposites. In: Proceedings of 5th International Scientific and Expert Conference of the International TEAM Society, Prešov, Slovačka.
Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2013) Study on thermal properties of synthetic and bio - based polyurethane. = Study on thermal properties of synthetic and bio - based polyurethane. Thermal science, 00. p. 165. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Jambrek, Filip and Šercer, Mladen and Pilipović, Ana (2012) Application of polymers in production of transport vehicles. = Application of polymers in production of transport vehicles. In: TEAM 2012 International Conference of Technique, education, Agriculture & Management, Slavonski Brod, Hrvatska.
Godec, Damir and Kramarić, Ines and Šercer, Mladen (2012) Application of reverse engineering in the development of polymer products. = Application of reverse engineering in the development of polymer products. In: International Conference on Innovative Technologies, IN-TECH 2012, Rijeka, Hrvatska.
Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2012) Energy efficient injection moulding of polymers. = Energy efficient injection moulding of polymers. Acta Technica Corviniensis, 5 (1). pp. 103-108. ISSN 2067-3809. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Šercer, Mladen and Godec, Damir and Raos, Pero (2012) From an idea to the final polymer product. = From an idea to the final polymer product. Engineering Review, 32 (1). pp. 41-47. ISSN 1330-9587. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Pilipović, Ana and Godec, Damir and Šercer, Mladen (2012) Influence of orientation and UV radiation on the mechanical properties of FDM prototype. = Influence of orientation and UV radiation on the mechanical properties of FDM prototype. In: 4th International Conference on Additive Technologies iCAT 2012, Maribor, Slovenija.
Rujnić-Sokele, Maja and Šercer, Mladen and Raos, Pero (2012) Plastične cijevi - pregled materijala i tržišta. = Plastic pipes – review of materials and markets. In: 10th Natural Gas, Heat and Water Conference/ 3rd International Natural Gas, Heat and Water Conference, Osijek, Hrvatska.
Rujnić-Sokele, Maja and Šercer, Mladen and Raos, Pero (2012) Plastične cijevi - pregled materijala i tržišta. = Plastic pipes - review of materials and markets. In: 3. međunarodni skup o prirodnom plinu, toplini i vodi, Osijek, Hrvatska.
Raos, Pero and Stojšić, Josip and Kalendova, Alena and Mĕřinská, Dagmar and Šercer, Mladen (2012) Study on polyamide 12 / clay nanocomposites by melt - intercalation process. = Study on polyamide 12 / clay nanocomposites by melt - intercalation process. In: 2nd International Conference on Manufacturing Engineering & Management - ICMEM 2012, Prešov, Slovačka.
Pilipović, Ana and Rujnić-Sokele, Maja and Godec, Damir and Šercer, Mladen (2012) Testing of processing and performance properties of marine degradable material. = Testing of processing and performance properties of marine degradable material. Polimeri : časopis za plastiku i gumu, 33 (3-4). pp. 106-111. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2012) Utjecaj parametara prerade na energijski učinkovito injekcijsko prešanje plastike i gume. = Processing parameters influencing energy efficient injection moulding of plastics and rubbers. Polimeri : časopis za plastiku i gumu, 33 (3-4). pp. 112-117. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Raos, Pero and Tonković, Zlatko and Šercer, Mladen (2011) Analysis and Prediction of Remaining Life Time of Damaged Polyethylene Gas Pipes. = Analysis and Prediction of Remaining Life Time of Damaged Polyethylene Gas Pipes. KGK. Kautschuk, Gummi, Kunststoffe, 64 (6). pp. 33-39. ISSN 0948-3276. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Jambrek, Filip and Pilipović, Ana and Šercer, Mladen (2011) Application of polymer materials for reducer. = Application of polymer materials for reducer. In: TEAM 2011 (Technics, Education, Argiculture, Management), 3rd International Scientific and Expert Conference of the International TEAM Society, 19.-21.10.2011., Trnava, Slovačka.
Pilipović, Ana and Raos, Pero and Šercer, Mladen (2011) Eksperimentalno ispitivanje kvalitete polimernih tvorevina proizvedenih LOM postupkom. = Experimental testing of quality of polymer parts produced by laminated object manufacturing - LOM. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2). pp. 253-260. ISSN 1330-3651. Vrsta rada: Preliminary communication. Kvartili JCR: Q4 (2011). .
Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2011) Energy efficient injection moulding of polymers. = Energy efficient injection moulding of polymers. In: 3rd International Scientific Conference Management of Technology - Step to Sustainable Production, 08-10.06.2011, Bol, Hrvatska.
Raos, Pero and Tonković, Zlatko and Šercer, Mladen (2011) Investigation on electrofusion weld properties of polyethylene gas pipes. = Investigation on electrofusion weld properties of polyethylene gas pipes. In: International Conference on Innovative Technologies IN-TECH 2011, 01-03.09.2011, Bratislava, Slovačka.
Pilipović, Ana and Šercer, Mladen and Stojanović, Ivan and Brajlih, Tomaž and Drstvenšek, Igor and Valentan, Bogdan (2011) Laminated object manufacturing vs. Fused deposition modeling : machine comparison. = Laminated object manufacturing vs. Fused deposition modeling : machine comparison. In: DAAAM World Symposium "Intelligent Manufacturing and Automation : Power of Knowledge and Creativity" (22 ; 2011), 23.-26.11.2011., Vienna, Austrija.
Rujnić-Sokele, Maja and Šercer, Mladen and Pilipović, Ana (2011) Plastics in the household waste. = Plastics in the household waste. In: 15th International Research/Expert Conference "Trends in the development of machinery and associated technology" TMT 2011, 12.-18.09.2011., Prag, Češka Republika.
Pilipović, Ana and Šercer, Mladen and Valentan, Bogdan (2011) Use of low - cost 3D printers and the influence of parameters on the precision and mechanical properties. = Use of low - cost 3D printers and the influence of parameters on the precision and mechanical properties. In: 13th International scientific conference on production engineering, 16-18.06.2011., Biograd na moru, Hrvatska.
Godec, Damir and Šercer, Mladen and Pilipović, Ana (2010) Application of Rapid Prototyping in Polymer Product Development - Case Studies. = Application of Rapid Prototyping in Polymer Product Development - Case Studies. Annals of DAAAM for 2010 & proceedings of the 21st International DAAAM Symposium, 21 (1). pp. 211-212. ISSN 1726-9679. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Godec, Damir and Pilipović, Ana and Šercer, Mladen (2010) Application of Rapid Prototyping in Polymer Product Development - Case Studies. = Application of Rapid Prototyping in Polymer Product Development - Case Studies. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Velika Gorica; Slovenia.
Godec, Damir and Pilipović, Ana and Šercer, Mladen (2010) Application of Rapid Prototyping in Polymer Product Development - Case Studies. = Application of Rapid Prototyping in Polymer Product Development - Case Studies. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Velika Gorica, Slovenija.
Pilipović, Ana and Šercer, Mladen and Kodvanj, Janoš (2010) Influence of crosslinking parameters on mechanical properties of chloroprene rubber. = Influence of crosslinking parameters on mechanical properties of chloroprene rubber. Transactions of FAMENA, 34 (3). pp. 57-70. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.
Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 21st International DAAAM Symposium, 20-23.10.2010., Zadar; Croatia.
Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Nova Gorica; Slovenia.
Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2010) Injection moulding and recycling of wood-thermoplastic composites. = Injection moulding and recycling of wood-thermoplastic composites. In: 7th Int. Conference on Mechanical Engineering GEPESZET 2010, 25-26.05.2010., Budapest; Hungary.
Šercer, Mladen and Tonković, Zlatko and Raos, Pero and Stojšić, Josip (2010) Ispitivanje trajnosti membrana regulatora plina. = Testing the Durability of Gas Regulator Membrane. In: 1st International natural gas, heat and water conference, 29.09.-01.10.2010., Osijek; Croatia.
Šercer, Mladen and Raos, Pero (2010) Micro/Nano Material Processing. = Micro/Nano Material Processing. In: Welding Engineering and Technology. Encyclopedia of Life Support Systems (EOLSS) . Eolss Publishers (under the Auspices of the UNESCO), Oxford, pp. 1-9. ISBN 978-1-905839
Godec, Damir and Krsnik, Igor and Šercer, Mladen (2010) Od ideje do gotovoga polimernog proizvoda. = From idea to final polimer product. Polimeri : časopis za plastiku i gumu, 31 (2). pp. 71-76. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Rujnić-Sokele, Maja and Šercer, Mladen and Godec, Damir (2010) Process capability analysis in the manufacturing of PET bottles. = Process capability analysis in the manufacturing of PET bottles. International Journal of Material Forming, 3 (SUPPL.). pp. 531-534. ISSN 1960-6206. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Rujnić-Sokele, Maja and Šercer, Mladen and Godec, Damir (2010) Process capability analysis in the manufacturing of PET bottles. = Process capability analysis in the manufacturing of PET bottles. In: The 13th Esaform Conference on Material Forming, 07-09.04.2010., Brescia; Italy.
Raos, Pero and Šercer, Mladen (2010) Teorijske osnove proizvodnje polimernih tvorevina. = Strojarski fakultet u Slavonskom Brodu, Slavonski Brod/Zagreb, -. ISBN 978-953-6048-57-1
Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2010) Thermal Properties of Common and Bio-Based Polyurethane. = Thermal Properties of Common and Bio-Based Polyurethane. In: International Conference on Innovative Technologies IN-TECH, 14-16.09.2010., Prag; Czech Republic.
Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2010) Thermal properties of bio- and synthetic based PUR foams. = Thermal properties of bio- and synthetic based PUR foams. In: 13th ESAFORM Conference on Material Forming, 07-09.04.2010., Brescia; Italy.
Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2010) Thermal properties of bio- and synthetic-based PUR foams. = Thermal properties of bio- and synthetic-based PUR foams. International Journal of Material Forming, 3 (SUPPL.). pp. 535-538. ISSN 1960-6206. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Rujnić-Sokele, Maja and Šercer, Mladen and Pilipović, Ana (2010) Waste packaging management in Republic of Croatia. = Waste packaging management in Republic of Croatia. In: 14th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2010, 11-18.09.2010., Mediterranean Cruise.
Šercer, Mladen and Križan, Božidar and Basan, Robert (2009) Konstruiranje polimernih proizvoda. = Design of Polymer Products. Sveučilište u Zagrebu, Zagreb, -. ISBN 978-953-6313-94-5 (Unpublished)
Šercer, Mladen and Raos, Pero Joining of Plastics and Composites. = Joining of Plastics and Composites. In: Welding Engineering and Technology. Encyclopedia of Life Support Systems (EOLSS) . Eolss Publishers (under the Auspices of the UNESCO), Oxford, pp. 1-31. ISBN 978-1-905839
