  |
 | Up a level |
Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2017) Long term stability of silicon roughness standards. = Long term stability of silicon roughness standards. Precision engineering, 48. pp. 352-356. ISSN 0141-6359. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.
Gomerčić, Tomislav and Đuras, Martina and Trbojević Vukičević, Tajana and Kužir, Snježana and Alić, Ivan and Šimunović, Vedran (2016) 3D atlas privjesnog kostura konja - Sveučilišni priručnik za studente veterinarske medicine. = 3D atlas of horse bones limb. Veterinarski fakultet, Sveučilište u Zagrebu, Zagreb, -. ISBN 978-953-8006-09-8
Mihaljević, Morana and Šimunović, Vedran and Mudronja, Vedran (2016) Detectability analysis of computer radiography by means of computed tomography. = Detectability analysis of computer radiography by means of computed tomography. In: 6th Conference on Industrial Computed Tomography, 09-12.02.2016., Wels, Austria.
Katić, Marko and Šimunović, Vedran and Baršić, Gorana and Mudronja, Vedran (2015) Calibration of line scales at HMT/FSB-LMPD. = Calibration of line scales at HMT/FSB-LMPD. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015, Vodice, Croatia.
Baršić, Gorana and Runje, Biserka and Šimunović, Vedran (2015) Etalon za nanomjeriteljstvo s višestrukim vrijednostima koraka i brazda. = Nano-calibration standard with multiple pitch and step height values. Tehnički vjesnik – Technical Gazette: Scientific professional Journal of technical faculties of the Josip Juraj Strossmayer University of Osijek., 22 (4). pp. 935-938. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.
Mudronja, Vedran and Šimunović, Vedran and Ački, Bojan and Matus, Michael and Bánréti, Edit and István, Dicso and Thalmann, Rudolf and Lassila, Antti and Lillepea, Lauri and Picotto, Gian Bartolo and Bellotti, Roberto and Pometto, Marco and Ganioglu, Okhan and Meral, Ilker and Salgado, José Antonio and Vailleau, Georges (2015) Final report on EURAMET.L-S21: "Supplementary comparison of parallel thread gauges". = Final report on EURAMET.L-S21: "Supplementary comparison of parallel thread gauges". Metrologia, 52 (1A). ISSN 0026-1394. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 16.
Šimunović, Vedran and Baršić, Gorana and Katić, Marko and Mudronja, Vedran (2015) Measurement of parallel thread gauges in HMI/FSB-LPMD. = Measurement of parallel thread gauges in HMI/FSB-LPMD. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015., Vodice, Croatia.
Mudronja, Vedran and Runje, Biserka and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2015) Postignuća Hrvatskog nacionalnog laboratorija za duljinu. = In: 15. Hrvatska konferencija o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.
Baršić, Gorana and Mudronja, Vedran and Katić, Marko and Šimunović, Vedran (2015) Use of statistical tolerances. = Use of statistical tolerances. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015., Vodice, Croatia.
Grgec Bermanec, Lovorka and Zvizdić, Davor and Šimunović, Vedran (2014) Development of method for determination of pressure balance piston fall rate. = Development of method for determination of pressure balance piston fall rate. ACTA IMEKO The e-Journal of the International Measurement Confederation (IMEKO), 3 (2). pp. 44-47. ISSN 2221-870X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mudronja, Vedran and Mahović, Sanjin and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2014) Example of statistical tolerances. = Example of statistical tolerances. In: MATRIB 2014. Materials, Wear, Recycling, 26-28.06.2014., Vela Luka, Hrvatska.
Mudronja, Vedran and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2014) Indeksi sposobnosti procesa i statističke tolerancije. = In: 14. Hrvatska konferencija o kvaliteti i 5. znanstveni skup Hrvatskog društva za kvalitetu, 15-17.05.2014., Baška, Otok Krk, Hrvatska.
Baršić, Gorana and Mahović, Sanjin and Katić, Marko and Šimunović, Vedran (2014) Long term stability of silicon roughness standards. = Long term stability of silicon roughness standards. In: 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, 02-06.06.2014., Dubrovnik; Croatia.
Runje, Biserka and Baršić, Gorana and Šimunović, Vedran and Medić, Srđan (2014) Osiguravanje kvalitete rezultata mjerenja kroz međulaboratorijske usporedbe. = Quality assurance of measurement results through interlaboratory comparisons. In: 14. Hrvatska konferencija o kvaliteti i 5. znanstveni skup Hrvatskog društva za kvalitetu, 15-17.05.2014., Baška, Otok Krk, Hrvatska.
Runje, Biserka and Baršić, Gorana and Šimunović, Vedran (2014) Praktikum za vježbe iz kolegija Teorija i tehnika mjerenja (Skripta). = Lab Exercises for the Course on Theory and Measurement Techniques. FSB, Zagreb. (Unpublished)
Katić, Marko and Mudronja, Vedran and Šimunović, Vedran (2014) Realization of the highest level of traceability in Croatian National Laboratory for Length. = Realization of the highest level of traceability in Croatian National Laboratory for Length. Transactions of FAMENA, 38 (1). pp. 37-44. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Runje, Biserka and Baršić, Gorana and Katić, Marko and Šimunović, Vedran and Horvatić Novak, Amalija (2014) Statistics in metrology. = Statistics in metrology. In: 10th International Conference Laboratory Competence 2014, 15-18.10.2014., Šibenik, Hrvatska.
Šimunović, Vedran (2014) Utjecaj mjernih postupaka na rezultat mjerenja srednjeg promjera navoja. = Influence of measurement procedures on measurement results of pitch diameter. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Katić, Marko and Šimunović, Vedran and Baršić, Gorana and Mudronja, Vedran (2013) Realization of highest level of traceability for length measurements in Croatia. = Realization of highest level of traceability for length measurements in Croatia. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.
Šimunović, Vedran and Baršić, Gorana and Katić, Marko and Mudronja, Vedran (2013) Roundness - harmonic analysis and digital filtration. = Roundness - harmonic analysis and digital filtration. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.
Mudronja, Vedran and Baršić, Gorana and Šimunović, Vedran and Katić, Marko (2013) Traceability for right angle in Croatian National Laboratory for Length. = Traceability for right angle in Croatian National Laboratory for Length. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.
Baršić, Gorana and Butković, Ivan and Šimunović, Vedran and Katić, Marko (2012) Analysis of dimensional characteristics of the ribs on steel bars for reinforcement of concrete. = Analysis of dimensional characteristics of the ribs on steel bars for reinforcement of concrete. In: 23rd International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Sustainability, 24-27.10.2012., Zadar, Hrvatska.
Katić, Marko and Šimunović, Vedran and Baršić, Gorana (2012) Development of a low-cost high accuracy Phase Shifting Gauge Block Interferometer. = Development of a low-cost high accuracy Phase Shifting Gauge Block Interferometer. In: 23rd DAAAM International Symposium on Intelligent Manufacturing and Automation: : Focus on Sustainability, 24-27.10.2012., Zadar, Hrvatska.
Grgec Bermanec, Lovorka and Martinaga, Marin and Zvizdić, Davor and Šimunović, Vedran (2012) Development of method for determination of pressure balance piston fall rate. = Development of method for determination of pressure balance piston fall rate. In: 20th IMEKO World Congress 2012, 9-14.10. 2012., Busan; South Korea.
Mudronja, Vedran and Runje, Biserka and Katić, Marko and Šimunović, Vedran and Baršić, Gorana (2012) Discussion about Six Sigma statistical definition. = Discussion about Six Sigma statistical definition. In: International Conference Management of Technology MOTSP 2012, 14-16.07.2012., Zadar, Croatia.
Šimunović, Vedran and Ferdelji, Nenad and Katić, Marko and Mudronja, Vedran (2011) Calculation of pitch diameter of symetrical thread plug gauges. = Calculation of pitch diameter of symetrical thread plug gauges. In: 13th International Scientific Conference on Production Engineering CIM 2011, 16-18.06.2011., Biograd, Hrvatska.
Baršić, Gorana and Šimunović, Vedran and Katić, Marko (2011) Ensuring measurement unity in the field of dimensional nanometrology. = Ensuring measurement unity in the field of dimensional nanometrology. In: 22nd DAAAM World Symposium 2011, 23.26.11.2011., Beč, Austrija.
Katić, Marko and Šimunović, Vedran and Mudronja, Vedran (2011) Modification of Kosters Primary Gauge Block Interferometer. = Modification of Kosters Primary Gauge Block Interferometer. In: 13th International scientific conference on production engineering CIM2011, 16-18.06.2011., Biograd, Hrvatska.
Katić, Marko and Šimunović, Vedran and Baršić, Gorana (2011) Modification of a zeiss gauge block interferometer. = Modification of a zeiss gauge block interferometer. In: The 22nd DAAAM International World Symposium, 23-26.11.2011., Beč, Austrija.
Katić, Marko and Mudronja, Vedran and Šimunović, Vedran (2010) Edge detection uncertainty in fringe analysis. = Edge detection uncertainty in fringe analysis. In: The 21ST DAAAM World Symposium, "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23.10.2010., Zadar, Croatia.
Matus, Michael and Nyholm, Kaj and Madej, Alan A and Bernard, John E and Walczuk, Jerzy and Crepinšek Lipuš, Lucija and Castillo M, Héctor A and Vega, Rene Pichardo and Bastida, Karina Beatriz and Mingolla, María Griselda and Malinovski, Igor and Tarelho, Luiz and França, Ricardo and Hamid, Ramiz and Sahin, Ersoy and Katić, Marko and Šimunović, Vedran and Robertsson, Lennart (2010) Final report for the period 2007–2009 on the CCL-K11 ongoing key comparison. = Final report for the period 2007–2009 on the CCL-K11 ongoing key comparison. Metrologia, 47. ISSN 0026-1394. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2010). Točan broj autora: 18.
Šimunović, Vedran and Mudronja, Vedran and Katić, Marko (2010) Stability of roundness measurement system. = Stability of roundness measurement system. In: The 21ST DAAAM World Symposium, "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions", 20-23.10.2010., Zadar, Croatia.
