  |
 | Up a level |
Cajner, Franjo and Kovačić, Saša and Rafael, Hrvoje and Vugrinčić, Amalija and Šimunović, Vinko and Gržeta, Biserka (2015) Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. = Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. Materialwissenschaft und Werkstofftechnik, 46 (1). pp. 69-77. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.
Kovačić, Saša and Cajner, Franjo and Landek, Darko (2015) Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel. = Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel. Key Engineering Materials, 674. pp. 257-262. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Šolić, Sanja and Cajner, Franjo and Panjan, Peter (2013) Influence of deep cryogenic treatment of high speed steel substrate on TiAlN coating properties. = Influence of deep cryogenic treatment of high speed steel substrate on TiAlN coating properties. Materialwissenschaft und Werkstofftechnik, 44 (12). pp. 950-958. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Cajner, Franjo and Landek, Darko and Kumić, Ivan and Vugrinčić, Amalija (2013) Influential factors in the surface-hardness testing of a nitrided layer. = Influential factors in the surface-hardness testing of a nitrided layer. Materiali in Tehnologije, 47 (4). pp. 531-533. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). .
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Šolić, Sanja and Kovačić, Saša (2012) Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. = Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. International Heat Treatment and Surface Engineering, 6 (2). pp. 67-71. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Šolić, Sanja and Cajner, Franjo and Leskovšek, Vojteh (2012) Effect of deep cryogenic treatment on mechanical and tribological properties of PM S390 MC high-speed steel. = Effect of deep cryogenic treatment on mechanical and tribological properties of PM S390 MC high-speed steel. Materials Testing, 2012/1. pp. 688-693. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Cajner, Franjo and Landek, Darko and Rafel, Hrvoje and Kovačić, Saša (2012) Effect of the heating rate in the tempering of DIN 100 V1. = Effect of the heating rate in the tempering of DIN 100 V1. HTM - Haerterei-Technische Mitteilungen, 67 (2). pp. 118-124. ISSN 0341-101X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Cajner, Franjo and Landek, Darko and Leskovšek, Vojteh (2010) Surface modifications of maraging steels used in the manufacture of moulds and dies. = Surface modifications of maraging steels used in the manufacture of moulds and dies. Materiali in Tehnologije, 44 (2). pp. 85-91. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. Journal of Engineering and Technology, 1 (1). pp. 1-9. ISSN 1338-2330. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Pustaić, Dragan and Cajner, Franjo and Leskovšek, Vojteh (2017) Investigation of Heat Treatment Influence on Microstructure of High - Speed Steel and its Resulting Mechanical Properties. = Investigation of Heat Treatment Influence on Microstructure of High - Speed Steel and its Resulting Mechanical Properties. In: Eighth International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE, 27th–29th June 2016, Brno. (In Press)
Kovačić, Saša and Cajner, Franjo and Landek, Darko (2016) Influence of steel substrate on the properties of PACVD gradient multilayer TiCN coating. = Influence of steel substrate on the properties of PACVD gradient multilayer TiCN coating. In: 3rd Mediterranean Conference on Heat Treatment and Surface Engineering, 26-28.09.2016., Portorož, Slovenija.
Cajner, Franjo and Landek, Darko and Kovačić, Saša (2015) Introduction and application of new tehnologies of plasma nitriding and PACVD coating. = Introduction and application of new tehnologies of plasma nitriding and PACVD coating. In: 5th International Conference „Mechanical Technologies and Structural Materials“, 24-25.9.2015, Split, Hrvatska.
Landek, Darko and Cajner, Franjo and Kovačić, Saša and Alar, Vesna and Macura, Vladimir (2015) Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel. = Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel. In: The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20-22.05.2015, Venecija, Italija.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Jačan, Jurica and Bogdanić, Dino (2015) Wear resistance of TiN / TiCN and TiN / Ti - B - N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. = Wear resistance of TiN / TiCN and TiN / Ti - B - N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. In: The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20-22.05.2015., Venecija, Italija.
Cajner, Franjo and Landek, Darko and Cajner, Hrvoje and Rafael, Hrvoje and Kovačić, Saša (2014) Characteristics of Warm Baths for the quenching of Tool Steels. = Characteristics of Warm Baths for the quenching of Tool Steels. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 09.-11.04.2014., Ljubljana, Slovenija.
Landek, Darko and Cajner, Franjo and Rafael, Hrvoje and Ćavar, Antonio (2014) Effect of Application of Deep - cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC. = Effect of Application of Deep - cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 9-11.04.2014., Ljubljana, Slovenija.
Cajner, Franjo and Leskovšek, Vojteh and Pustaić, Dragan (2014) Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. = Influence of heat treatment of high-speed steel on its microstructure, hardness and fracture toughness. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.
Pustaić, Dragan and Cajner, Franjo (2014) Influence of heat treatment on crack tip opening displacement and on resistance of crack propagation of alloyed steel. = Influence of heat treatment on crack tip opening displacement and on resistance of crack propagation of alloyed steel. In: 7th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2013, 01-03.07.2013., Brno; Czech Republic.
Cajner, Franjo and Landek, Darko and Kumić, Ivan and Kovačić, Saša and Rafael, Hrvoje (2014) Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. = Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.
Cajner, Franjo and Leskovšek, Vojteh and Pustaić, Dragan (2013) Correlation between microstructure, hardness and fracture toughness of heat-treated high-speed steel. = Correlation between microstructure, hardness and fracture toughness of heat-treated high-speed steel. In: The 30th DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, 25-28.09.2013., Primošten, Hrvatska.
Landek, Darko and Cajner, Franjo and Rafael, Hrvoje and Kovačić, Saša (2013) Influence of heat treatment parameters on the mechanical properties and wear resistance of hs10 - 2 - 5 - 8 high speed steel. = Influence of heat treatment parameters on the mechanical properties and wear resistance of hs10 - 2 - 5 - 8 high speed steel. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, Dubrovnik- Cavtat, Hrvatska.
Cajner, Franjo and Kovačić, Saša and Rafael, Hrvoje and Vugrinčić, Amalija and Šimunović, Vinko (2013) Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. = Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. In: 2nd Mediterranean Conference on Heat Treatment and Surface Engineering & Challenges for Heat Treatment and Surface Engineering, 11-14.06.2013, Cavtat, Hrvatska.
Jenko, Darja and Šolić, Sanja and Leskovšek, Vojteh and Cajner, Franjo and Jenko, Monika (2013) Transmission electron microscopy of PM S390 MC high - speed steel. = Transmission electron microscopy of PM S390 MC high - speed steel. In: IVC-19 / ICN+T 2013 and partner conferences, 9 - 13.09.2013., Pariz, Francuska.
Landek, Darko and Petrič, Branko and Cajner, Franjo (2013) The induction coils and power supplies for modern heating processes. = The induction coils and power supplies for modern heating processes. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11-14.06.2013., Dubrovnik- Cavtat, Hrvatska.
Cajner, Franjo and Kovačić, Saša and Kumić, Ivan and Cajner, Hrvoje (2013) The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. = The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11.-14.06.2013., Zagreb, Hrvatska.
Cajner, Franjo and Landek, Darko (2012) Posebnosti toplinske obrade alatnih čelika. = Specificities of the heat treatment of tool steels. In: Heat Treatment and Surface Engineering – European Opportunities for Croatian Economy, 11. 05. 2012., Rijeka, Hrvatska.
Cajner, Franjo and Šolić, Sanja and Kumić, Ivan and Leskovšek, Vojteh (2011) Effect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel. = Effect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel. In: 3rd International IFHTSE Conference on "Heat treatment and Surface engineering of Tools and Dies", Wels, Austrija.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Šolić, Sanja and Kovačić, Saša (2011) Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. = Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. In: IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Kovačić, Saša (2011) Effect of the heating rate in the tempering of steel grade EN 100 V1. = Effect of the heating rate in the tempering of steel grade EN 100 V1. In: The 3rd IFHTSE-Conference on “Heat Treatment and Surface Engineering of Tools and Dies”., 23-25. 03. 2011, Wels, Austrija.
Pustaić, Dragan and Cajner, Franjo (2011) Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. = Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. In: 6th International Conference "Materials Structure and Micromechanics of Fracture, MSMF-6", 28-30.06.2010., Brno; Czech Republic.
Pustaić, Dragan and Cajner, Franjo (2010) Influence of Microstructure of 65 Si 7 Steel on its Mechanical Properties. = Influence of Microstructure of 65 Si 7 Steel on its Mechanical Properties. In: 6th International Conference on Materials Structure & Micromechanics of Fracture, 28-30.06.2010., Brno; Czech Republic.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. In: 10th International Scientific Conference New Ways in Manufacturing Technologies, 17-19. 06. 2010., Prešov; Slovakia.
Landek, Darko and Cajner, Franjo and Kovačić, Saša and Peharec, Ivan (2010) Utjecaj naknadne oksidacije na otpornost trošenju i korozijsku postojanost nitrokarburiranog čelika. = The effect of post oxidizing of nitrocarburized steel on its wear and corrosion resistance. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.
Šolić, Sanja and Cajner, Franjo and Leskovšek, Vojteh and Rafael, Hrvoje (2010) Utjecaj parametara toplinske obrade na svojstva brzoreznog čelika PM S390 MC. = Influence of heat treatment parameters on PM S390 MC high speed steel properties. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.
