Items where Author is "Cajner, Hrvoje"

Thesis

Cajner, Hrvoje (2011) Višekriterijsko adaptivno oblikovanje planova pokusa. = Multi-criteria adaptive design of experimental plans. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šakić, Nikola.

Article

Mihaljević, Morana and Cajner, Hrvoje and Runje, Biserka and Markučič, Damir and Keran, Zdenka (2017) Analysis of the couplant influence on the ultrasonic thickness measurement of the steel grade S355J0 = Untersuchung des Einflusses des Koppelmittels auf die Ultraschall-Messung der Probendicke des Stahls S355J0. = Analysis of the couplant influence on the ultrasonic thickness measurement of the steel grade S355J0 = Untersuchung des Einflusses des Koppelmittels auf die Ultraschall-Messung der Probendicke des Stahls S355J0. Materialwissenschaft und Werkstofftechnik, 48 (8). pp. 803-813. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2017). Točan broj autora: 5.

Opetuk, Tihomir and Kolar, Davor and Cajner, Hrvoje and Đukić, Goran (2017) Difference and similarity in perception between Green Supply Chain Management in food industry and Green Supply Chain Management in generally in Croatian companies. = Difference and similarity in perception between Green Supply Chain Management in food industry and Green Supply Chain Management in generally in Croatian companies. Zeszyty Naukowe: Organizacja i Zarządzanie, 1 (70). pp. 49-64. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Spoerk, Martin and Arbeiter, Florian and Cajner, Hrvoje and Sapkota, Janak and Holzer, Clemens (2017) Parametric optimization of intra- and inter- layer strengths inparts produced by extrusion- based additive manufacturing ofpoly(lactic acid). = Parametric optimization of intra- and inter- layer strengths inparts produced by extrusion- based additive manufacturing ofpoly(lactic acid). Journal of applied polymer science, 134 (41). pp. 45401-1. ISSN 0021-8995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 5.

Cajner, Hrvoje and Šakić, Nikola and Ćosić, Predrag (2012) Poboljšanje planova pokusa višekriterijskim pristupom. = Improvement of experimental plans using multi-criteria approach. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (3). pp. 601-606. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2012). Točan broj autora: 3.

Conference or Workshop Item

Gudlin, Mihael and Hegedić, Miro and Štefanić, Nedeljko and Cajner, Hrvoje (2017) Development of Supplier and Staff Organization Model of Hospital Pharmacy. = Development of Supplier and Staff Organization Model of Hospital Pharmacy. In: 2nd International Scientific Conference LEAN Spring Summit 2017, 1.-2.6.2017., Šibenik, Hrvatska.

Gajšek, Brigita and Đukić, Goran and Opetuk, Tihomir and Cajner, Hrvoje (2017) Human in Manual Order Picking Systems. = Human in Manual Order Picking Systems. In: Management of Technology – Step to Sustainable Production, 5-7.04.2017., Dubrovnik.

Pavlinić, Ivan and Gornik, Ivan and Štefanić, Nedeljko and Cajner, Hrvoje (2017) LEAN and smart hospital. = LEAN and smart hospital. In: Lean Spring Summit 2017, 1.-2.6.2017., Šibenik, Republika Hrvatska.

Đukić, Goran and Opetuk, Tihomir and Cajner, Hrvoje and Jakovljević, Matko (2017) Simulation analysis of models for estimation of empty travel time of vehicles in non-automated material handling systems. = Simulation analysis of models for estimation of empty travel time of vehicles in non-automated material handling systems. In: MHCL 2017 conference, 4-6.10.2017., Beograd, Srbija.

Juretić, Hrvoje and Cajner, Hrvoje and Smoljanić, Goran and Ahac, Igor and Ljubas, Davor (2016) Optimiranje koagulacijske predobrade sirove bunarske vode bogate prirodnim organskim tvarima. = Optimization of coagulation pretreatment of raw groundwater rich in natural organic matter. In: II. međunarodni i VI. hrvatski znanstveno-stručni skup Voda za sve, 18.03.2016., Osijek, Hrvatska.

Štefanić, Nedeljko and Perica, Mladen and Cajner, Hrvoje and Banić, Marko and Lovrenčić, Kruno and Štefanić, Anja and Gudlin, Mihael and Hegedić, Miro (2015) Leanom upravljana bolnica. = Lean Hospital. In: Lean Spring Summit 2015, 21-23.05.2015., Šibenik, Hrvatska.

Cajner, Hrvoje and Kovačec, Miroslav and Štefanić, Nedeljko (2015) Potencijal korištenja alata LEAN menadžmenta u hrvatskim tvrtkama. = The potential of using lean management tools in Croatian companies. In: Lean Spring Summit 2015, 21.-23.05.2015., Šibenik, Hrvatska.

Đukić, Goran and Opetuk, Tihomir and Cajner, Hrvoje and Lerher, Tone and Jelić, Ana (2015) Routing of VNA man-up turret trucks and vertical order-pickers. = Routing of VNA man-up turret trucks and vertical order-pickers. In: XIII. International logistics & supply chain congress, 22.-23.10.2015., Izmir, Turska.

Cajner, Hrvoje and Đukić, Goran and Kovačec, Miroslav and Štefanić, Nedeljko (2015) The analysis of lean management indicators in Croatian companies. = The analysis of lean management indicators in Croatian companies. In: MOTSP 2015, 10.-12.06.2015., Brela, Hrvatska.

Cajner, Franjo and Landek, Darko and Cajner, Hrvoje and Rafael, Hrvoje and Kovačić, Saša (2014) Characteristics of Warm Baths for the quenching of Tool Steels. = Characteristics of Warm Baths for the quenching of Tool Steels. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 09.-11.04.2014., Ljubljana, Slovenija.

Cajner, Hrvoje and Mačković, Mario and Štefanić, Nedeljko and Grubešić, Nikola (2014) Characterization of the explosion of flammable gas in closed pipes using the design of experiments methodology. = Characterization of the explosion of flammable gas in closed pipes using the design of experiments methodology. In: 6th International Scientific Conference Management of Technology – Step to Sustainable Production, 11.-13. lipanj 2014., Bol, Island Brac, Croatia.

Cajner, Franjo and Kovačić, Saša and Kumić, Ivan and Cajner, Hrvoje (2013) The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. = The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11.-14.06.2013., Zagreb, Hrvatska.

Cajner, Hrvoje and Šakić, Nikola and Ćosić, Predrag (2012) Definition of new criterion in design of experiments based on model precision. = Definition of new criterion in design of experiments based on model precision. In: Management of Technology Step to Sustainable Production MOTSP2012, 14.-16.06.2012., Zadar, Republika Hrvatska.

Rumbak, Slavko and Mudronja, Vedran and Šakić, Nikola and Cajner, Hrvoje and Bogut, Marijan (2010) Analysis of ignition risk to ball bearings in rotating equipment in explosive atmospheres. = Analysis of ignition risk to ball bearings in rotating equipment in explosive atmospheres. In: PCIC Europe 2010 Conference, PCIC EUROPE 2010, 15-17. 06. 2010., Oslo; Norway.

Cajner, Hrvoje and Babić, Anita and Šakić, Nikola (2010) Pokusi sa smjesama - primjena pri optimiranju svojstava materijala. = In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.

Babić, Anita and Cajner, Hrvoje and Šakić, Nikola (2010) Using historical data analysis in problems of mixtures. = Using historical data analysis in problems of mixtures. In: 2nd International Scientific Conference Management of Technology - Step to Sustainable Production, 02-04.06.2010., Rovinj; Croatia.

Cajner, Hrvoje and Babić, Anita and Šakić, Nikola (2010) Značaj uporabe planiranja pokusa pri optimiranju procesa i proizvoda. = Importance of using design of experiments in process and product optimization. In: 10. hrvatska konferencija o kvaliteti i 1. znanstveni skup hrvatskog društva za kvalitetu, 10-12.05.2010., Šibenik; Croatia.