  |
 | Up a level |
Pilipović, Ana and Drstvenšek, Igor and Šercer, Mladen (2014) Mathematical model for the selection of processing parameters in selective laser sintering of polymer products. = Mathematical model for the selection of processing parameters in selective laser sintering of polymer products. Advances in Mechanical Engineering, 2014. pp. 1-9. ISSN 1687-8132. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Valentan, Bogdan and Pogačar, Dušan and Brajlih, Tomaž and Zupančič Hartner, Tjaša and Pilipović, Ana and Drstvenšek, Igor (2012) Development of a 3D printer for thermoplastic modelling. = Development of a 3D printer for thermoplastic modelling. Materiali in Tehnologije, 46 (6). pp. 589-594. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). .
Valentan, Bogdan and Pilipović, Ana and Brajlih, Tomaž and Sever, Peter and Pahole, Ivo and Ficko, Mirko and Balič, Jože and Drstvenšek, Igor (2012) A fast method to predict the cooling time of wax for investment casting procedure. = A fast method to predict the cooling time of wax for investment casting procedure. Advances in production engineering and management (APEM), 7 (4). pp. 255-263. ISSN 1854-6250. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 8.
Pilipović, Ana and Šercer, Mladen and Stojanović, Ivan and Brajlih, Tomaž and Drstvenšek, Igor and Valentan, Bogdan (2011) Laminated object manufacturing vs. Fused deposition modeling : machine comparison. = Laminated object manufacturing vs. Fused deposition modeling : machine comparison. In: DAAAM World Symposium "Intelligent Manufacturing and Automation : Power of Knowledge and Creativity" (22 ; 2011), 23.-26.11.2011., Vienna, Austrija.
Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 21st International DAAAM Symposium, 20-23.10.2010., Zadar; Croatia.
Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Nova Gorica; Slovenia.
