Items where Author is "Garašić, Ivica"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 37.

Bušić, Matija and Garašić, Ivica and Kožuh, Zoran and Dolić, Natalija (2016) Analiza zavarenih spojeva izvedenih bazičnom dvostruko obloženom elektrodom. = Analysis of welded joints produced with basic double coated electrode. In: Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.

Tomić, Tanja and Kožuh, Zoran and Garašić, Ivica and Samardžić, Ivan (2016) Effects of hydrogen upon the properties of thermo mechanical controlled process (TMCP) steel. = Effects of hydrogen upon the properties of thermo mechanical controlled process (TMCP) steel. Metalurgija, 55 (1). pp. 99-102. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.

Bauer, Branko and Jurica, Maja and Dolinar, Alen and Garašić, Ivica (2016) Utjecaj kemijskog sastava aluminijske legure u lijevanom stanju na kvalitetu spoja zavarenog MIG postupkom. = Influence of chemical composition on the quality of MIG welded As - cast aluminium alloy joint. In: 41. Međunarodna konferencija HDTZ, 8.-11. 06 2016., Opatija, Republika Hrvatska.

Bauer, Branko and Jurica, Maja and Dolinar, Alen and Garašić, Ivica (2016) Utjecaj kemijskog sastava aluminijske legure u lijevanom stanju na kvalitetu spoja zavarenog MIG postupkom. = Influence of Chemical Composition on the Quality of MIG welded As - Cast Aluminium alloy Joint. In: 41. Međunarodna konferencija HDTZ, Zavarivanje - Welding 2016., Opatija, Hrvatska.

Garašić, Ivica and Jurica, Maja (2016) Utjecaj zaštitnih plinova na oblik spoja pri MIG/MAG zavarivanju CrNi čelika. = Influence of shielding gas on joint geometry at MIG/MAG welding of Cr - Ni steels. In: 41. Međunarodna konferencija HDTZ, Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.

Perić, Mato and Tonković, Zdenko and Garašić, Ivica and Vuherer, Tomaž (2016) An engineering approach for a T-joint fillet welding simulation using simplified material properties. = An engineering approach for a T-joint fillet welding simulation using simplified material properties. Ocean engineering, 128. pp. 13-21. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.

Tomić, Tanja and Kožuh, Zoran and Garašić, Ivica and Samardžić, Ivan (2015) Effects of hydrogen upon the properties of thermo mechanical controlled process steel. = Effects of hydrogen upon the properties of thermo mechanical controlled process steel. Metalurgija, 55 (1). pp. 99-102. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Garašić, Ivica and Kožuh, Zoran and Jurica, Maja and Tomić, Tanja and Čolić, Luka and Babić, Nikola (2015) Optimizacija sastava aktivacijskog premaza za A – TIG navarivanje. = Optimization of the A – TIG bead on plate welding flux composition. In: 8. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SB 2015. “ SUVREMENI PROIZVODNI POSTUPCI , OPREMA I MATERIJALI ZA ZAVARENE KONSTRUKCIJE I PROIZVODE”, Slavonski Brod, Hrvatska.

Juraga, Ivan and Ljubić, Kruno and Živčić, Milan and Garašić, Ivica (2015) Pogreške u zavarenim spojevima. = Defects in weld joints. Hrvatsko društvo za tehniku zavarivanja, Zagreb, -. ISBN 978-953-7518-06-6

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2015) Sensors and their classification in the fusion welding technology. = Sensors and their classification in the fusion welding technology. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (4). pp. 1069-1074. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Jurica, Maja and Garašić, Ivica and Kožuh, Zoran (2015) Usporedba konvencionalnog i CBT načina prijenosa metala u području prijelaznog luka. = Comparison of conventional and CBT metal transfer in transition arc transfer mode. In: 8. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SB 2015. “ SUVREMENI PROIZVODNI POSTUPCI, OPREMA I MATERIJALI ZA ZAVARENE KONSTRUKCIJE I PROIZVODE”, Slavonski Brod, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2014) Analiza prijenosa metala pri MAG CBT zavarivanju. = Metal transfer analysis during MAG CBT welding. Zavarivanje, 57 (3/4). pp. 85-92. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2014) Analiza prijenosa metala pri MAG CBT zavarivanju. = Metal transfer analysis during MAG CBT welding. In: 40. Međunarodna konferencija HDTZ ZAVARIVANJE - WELDING 2014, Šibenik, Hrvatska.

Perić, Mato and Tonković, Zdenko and Rodić, Alan and Surjak, Martin and Garašić, Ivica and Boras, Ivanka and Švaić, Srećko (2014) Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weld. = Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weld. Materials and Design, 53. pp. 1052-1063. ISSN 0261-3069. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 7.

Tomić, Tanja and Kožuh, Zoran and Kralj, Slobodan and Garašić, Ivica (2014) Određivanje kvalitete laserskog reza na čeliku AISI 316. = Determination of lasers's cut quality on AISI 316 steel. In: Zavarivanje - Welding 2014, Šibenik, Hrvatska.

Dolić, Natalija and Garašić, Ivica and Malina, Jadranka and Kožuh, Zoran (2014) Testing of mechanical properties of almg4.5mn alloy welded by mig procedure and impact of hydrogen on mechanical properties of the welded joint. = Testing of mechanical properties of almg4.5mn alloy welded by mig procedure and impact of hydrogen on mechanical properties of the welded joint. In: 40th CWS International Conference WELDING 2014, Šibenik, Solaris, Hrvatska.

Garašić, Ivica and Remenar, Maja and Kufrin, Tomislav (2014) Zavarivanje MIG/MAG promijenjivim polaritetom - posebnosti i primjena. = Variable polarity GMAW welding - specific issues and application. Zavarivanje, 57 (1/2). pp. 17-23. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Tomić, Tanja and Kralj, Slobodan and Kožuh, Zoran and Garašić, Ivica and Brumec, Gašpar (2013) Optimizacija parametara za MAG postupak zavarivanja čelika API 5L X80. = Zavarivanje i zavarene konstrukcije, 58 (3). pp. 101-113. ISSN 0354-7965. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan and Tomić, Tanja and Glogović, Zlatko (2013) Primjena izmjenične struje kod mag navarivanja legure inconel 625. = Application of alternating current for mag cladding of inconel 625. In: 7. Međunarodno znanstveno-stručno savjetovanje SBZ 2013, Slavonski Brod, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan and Barun, Trpimir (2012) Matematičko modeliranje pojave hladnih pukotina pri mokrom podvodnom zavarivanju. = mathematical modeling of cold crack appearance during underwater wet welding. In: IV. Savjetovanje o morskoj tehnologiji, Rijeka, Hrvatska.

Tonković, Zdenko and Perić, Mato and Surjak, Martin and Garašić, Ivica and Boras, Ivanka and Rodić, Alan and Švaić, Srećko (2012) Numerical and Experimental Modeling of a T-joint Fillet Welding Process. = Numerical and Experimental Modeling of a T-joint Fillet Welding Process. In: Quantitative Infrared Thermography conference (11 ; 2012), 11.– 14.06.2012, Napulj, Italija.

Kralj, Slobodan and Kožuh, Zoran and Garašić, Ivica and Tomić, Tanja (2012) Sklonost čelika API 5L X80 prema hladnim pukotinama. = Susceptibility of API 5L X80 steel to cold cracking. Zavarivanje, 55. pp. 5-13. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Dolić, Natalija and Malina, Jadranka and Kožuh, Zoran and Garašić, Ivica and Tunić, Jozef (2012) Tensile behaviour of mig welded hydrogenated Al-alloy EN AW-5083. = Tensile behaviour of mig welded hydrogenated Al-alloy EN AW-5083. In: European Conference on Welding, Joining and Cutting (8 ; 2012), Pula, Hrvatska.

Kralj, Slobodan and Kožuh, Zoran and Garašić, Ivica and Remenar, Maja and Bilić, Livio (2012) Utjecaj prijenosa metala na osjetljivost elektrolučnog senzora. = Effects of metal transfer mode upon the sensitivity of electric arc sensor. In: 8. Europsko savjetovanje Eurojoin 8, Pula, Hrvatska.

Kralj, Slobodan and Kožuh, Zoran and Garašić, Ivica and Šakić, Nikola and Tomić, Tanja (2012) Utjecaj unosa topline na svojstva zavara čelika X80. = Effects of heat input upon welded joint made on X80 steel grade. In: 8. Europsko savjetovanje Eurojoin 8, Pula, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan (2011) Specifičnosti i primjena plazma zavarivanja. = Specific issues and application of plasma welding. In: 6. Međunarodno znanstveno-stručno savjetovanje SBZ 2011, Slavonski Brod, Hrvatska.

Garašić, Ivica and Kralj, Slobodan and Kožuh, Zoran (2011) Suvremeni postupci MIG / MAG zavarivanja. = Modern processes of MIG / MAG welding. Zavarivanje, 54. pp. 61-67. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan and Pacak, Miroslav (2010) Analysis of Underwater Repair Technology on the Jack-Up Platform Spud Can. = Analysis of Underwater Repair Technology on the Jack-Up Platform Spud Can. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 61 (2). pp. 153-160. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 4.

Kožuh, Zoran and Kralj, Slobodan and Garašić, Ivica and Dorn, Lutz (2010) Mathematical model for calculating the strength of a single lap adhesive joint intended for the service in sea water. = Mathematical model for calculating the strength of a single lap adhesive joint intended for the service in sea water. Materialwissenschaft und Werkstofftechnik, 41 (1). pp. 53-59. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 4.

Garašić, Ivica and Ćorić, Anto and Kožuh, Zoran and Samardžić, Ivan (2010) Occurence of cold cracks in welding of high - strength S960QL steel. = Occurence of cold cracks in welding of high - strength S960QL steel. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (3). pp. 327-335. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Garašić, Ivica and Ćorić, Anto and Kožuh, Zoran and Samardžić, Ivan (2010) Occurrence of cold cracks in welding of high-strength S960 QL steel. = Occurrence of cold cracks in welding of high-strength S960 QL steel. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (3). pp. 327-335. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 4.

Garašić, Ivica and Kralj, Slobodan and Kožuh, Zoran and Barun, Trpimir (2010) Podvodno mokro zavarivanje duplex čelika. = Underwater wet welding of duplex steel. In: III Savjetovanje o morskoj tehnologiji, 30.11.-01.12.2009., Rijeka; Croatia.

Kožuh, Zoran and Glogović, Zlatko and Garašić, Ivica and Petrović, Vedran (2010) Usporedba plinskog rezanja acetilenom i propan - butanom. = Usporedba plinskog rezanja acetilenom i propan - butanom. Zavarivanje, 53. pp. 73-81. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Kožuh, Zoran and Glogović, Zlatko and Garašić, Ivica and Petrović, Vedran (2010) Usporedba plinskog rezanja acetilenom i propan-butanom. = Comparison of acetylene and propane-butane gas cutting. Zavarivanje, 53. pp. 73-81. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Kralj, Slobodan and Kožuh, Zoran and Garašić, Ivica and Panjković, Vladimir (2009) Automatizirano tip tig zavarivanje. = Automated tip tig welding. In: 5. Međunarodno znanstveno-stručno savjetovanje SBZ 2009 Robotizacija i automatizacija u zavarivanju i ostalim tehnikama, Slavonski Brod, Hrvatska.

Garašić, Ivica (2008) Osjetljivost čelika X70 na hladne pukotine pri mokrom podvodnom zavarivanju. = Susceptibility of X70 steel on cold cracking during underwater wet welding. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kralj, Slobodan.

Jurica, Maja and Kožuh, Zoran and Bauer, Branko and Garašić, Ivica Effect of the GMAW metal transfer mode on the weld metal structure of the HSLA X80. = Effect of the GMAW metal transfer mode on the weld metal structure of the HSLA X80. Materiali in tehnologije. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4. (Unpublished)

This list was generated on Wed Oct 20 14:09:17 2021 CEST.