  |
 | Up a level |
Landek, Darko and Alar, Vesna and Kovačić, Saša and Baršić, Gorana (2017) Influence of surface preparation on the properties of a nitrocarburized layer. = Influence of surface preparation on the properties of a nitrocarburized layer. In: International conference on materials, corrosion, heat treatment, testing and tribology MTECH2017, 04-07.10.2017., Zadar, Hrvatska.
Kovačić, Saša and Cajner, Franjo and Landek, Darko (2016) Influence of steel substrate on the properties of PACVD gradient multilayer TiCN coating. = Influence of steel substrate on the properties of PACVD gradient multilayer TiCN coating. In: 3rd Mediterranean Conference on Heat Treatment and Surface Engineering, 26-28.09.2016., Portorož, Slovenija.
Jačan, Jurica and Landek, Darko (2016) Ispitivanje otpornosti na erozijsko trošenje tvrdih prevlaka proizvedenih PACVD postupkom. = Erosion wear testing of hard coatings produced by PACVD process. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.
Rozing, Goran and Alar, Vesna and Landek, Darko (2016) Poboljšanje triboloških svojstava martenzitnih korozijski postojanih čelika. = Improvement of tribological properties of martensitic stainless steel. In: 22. Međunarodno savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb, Hrvatska.
Bogdanić, Dino and Landek, Darko (2016) Povećanje otpornosti na abrazijsko trošenje primjenom tvrdih PACVD prevlaka. = Improvement of abrasion wear resistance by using hard PACVD coating. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.
Landek, Darko and Župan, Josip and Filetin, Tomislav (2015) Influence of quenching in water based nanofluid on quench distortions in long cylinders. = Influence of quenching in water based nanofluid on quench distortions in long cylinders. In: 5th International Conference on DISTORTION ENGINEERING, Bremen, Njemačka.
Cajner, Franjo and Landek, Darko and Kovačić, Saša (2015) Introduction and application of new tehnologies of plasma nitriding and PACVD coating. = Introduction and application of new tehnologies of plasma nitriding and PACVD coating. In: 5th International Conference „Mechanical Technologies and Structural Materials“, 24-25.9.2015, Split, Hrvatska.
Landek, Darko and Cajner, Franjo and Kovačić, Saša and Alar, Vesna and Macura, Vladimir (2015) Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel. = Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel. In: The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20-22.05.2015, Venecija, Italija.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Jačan, Jurica and Bogdanić, Dino (2015) Wear resistance of TiN / TiCN and TiN / Ti - B - N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. = Wear resistance of TiN / TiCN and TiN / Ti - B - N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. In: The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20-22.05.2015., Venecija, Italija.
Kovačić, Saša and Cajner, Franjo and Landek, Darko (2015) Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel. = Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel. Key Engineering Materials, 674. pp. 257-262. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Župan, Josip and Filetin, Tomislav and Landek, Darko (2014) Analysis of the quenching oil' s cooling curves with agitation and with addition of nanoparticles. = Analysis of the quenching oil' s cooling curves with agitation and with addition of nanoparticles. In: European Conference on Heat Treatment and 21st IFHTSE Congress, Minhen, Njemačka.
Župan, Josip and Filetin, Tomislav and Landek, Darko (2014) Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles. = Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.
Cajner, Franjo and Landek, Darko and Cajner, Hrvoje and Rafael, Hrvoje and Kovačić, Saša (2014) Characteristics of Warm Baths for the quenching of Tool Steels. = Characteristics of Warm Baths for the quenching of Tool Steels. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 09.-11.04.2014., Ljubljana, Slovenija.
Župan, Josip and Landek, Darko and Filetin, Tomislav (2014) Cooling characteristics of water based nanofluids with agitation. = Cooling characteristics of water based nanofluids with agitation. Materials Performance and Characterization, 3 (4). pp. 326-336. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Liščić, Božidar and Filetin, Tomislav and Landek, Darko and Župan, Josip (2014) Current Investigations at Quenching Research Centre. = Current Investigations at Quenching Research Centre. Materials Performance and Characterization, 3 (4). pp. 3-18. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Landek, Darko and Cajner, Franjo and Rafael, Hrvoje and Ćavar, Antonio (2014) Effect of Application of Deep - cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC. = Effect of Application of Deep - cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC. In: 9th International Conference on Industrial Tools and Material Processing Technologies, 9-11.04.2014., Ljubljana, Slovenija.
Landek, Darko and Lisjak, Dragutin and Lübben, Thomas and Župan, Josip (2014) Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling. = Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling. Materials Performance and Characterization, 3 (4). pp. 99-117. ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Landek, Darko and Župan, Josip and Filetin, Tomislav (2014) A Prediction of Quenching Parameters Using Inverse Analysis. = A Prediction of Quenching Parameters Using Inverse Analysis. Materials Performance and Characterization, 3 (4). ISSN 2165-3992. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Župan, Josip (2014) Selection of optimal conditions for immersion quenching. = Selection of optimal conditions for immersion quenching. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.
Cajner, Franjo and Landek, Darko and Kumić, Ivan and Kovačić, Saša and Rafael, Hrvoje (2014) Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. = Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. In: European Conference on Heat Treatment and 21st IFHTSE Congress, 12-15.05.2014., Munich; Germany.
Župan, Josip and Landek, Darko and Filetin, Tomislav (2013) Cooling characteristics of water based nanofluid with agitation. = Cooling characteristics of water based nanofluid with agitation. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, Dubrovnik- Cavtat, Hrvatska.
Landek, Darko and Cajner, Franjo and Rafael, Hrvoje and Kovačić, Saša (2013) Influence of heat treatment parameters on the mechanical properties and wear resistance of hs10 - 2 - 5 - 8 high speed steel. = Influence of heat treatment parameters on the mechanical properties and wear resistance of hs10 - 2 - 5 - 8 high speed steel. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, Dubrovnik- Cavtat, Hrvatska.
Cajner, Franjo and Landek, Darko and Kumić, Ivan and Vugrinčić, Amalija (2013) Influential factors in the surface-hardness testing of a nitrided layer. = Influential factors in the surface-hardness testing of a nitrided layer. Materiali in Tehnologije, 47 (4). pp. 531-533. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). .
Župan, Josip and Landek, Darko and Filetin, Tomislav (2013) Investigation of the cooling process by nanofluids according to ISO 9950 and ASTM D 6482 standards. = Investigation of the cooling process by nanofluids according to ISO 9950 and ASTM D 6482 standards. Materiali in Tehnologije, 47 (1). pp. 125-127. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). .
Landek, Darko and Šercer, Mladen and Rujnić-Sokele, Maja and Alar, Vesna and Bauer, Branko and Godec, Damir and Juraga, Ivan and Keran, Zdenka and Kožuh, Zoran and Math, Miljenko and Mihalic, Ivana and Pilipović, Ana and Stojanović, Ivan and Šimunović, Vinko (2013) Materijali i proizvodni postupci. = Materials and production. [UNSPECIFIED]
Landek, Darko and Lisjak, Dragutin and Lübben, Thomas and Frerichs, Friedhelm (2013) Modeling of unavoidable residual stresses after transformation - free cooling. = Modeling of unavoidable residual stresses after transformation - free cooling. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11-14.06.2013., Dubrovnik- Cavtat, Hrvatska.
Landek, Darko and Petrič, Branko and Cajner, Franjo (2013) The induction coils and power supplies for modern heating processes. = The induction coils and power supplies for modern heating processes. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11-14.06.2013., Dubrovnik- Cavtat, Hrvatska.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Šolić, Sanja and Kovačić, Saša (2012) Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. = Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. International Heat Treatment and Surface Engineering, 6 (2). pp. 67-71. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Cajner, Franjo and Landek, Darko and Rafel, Hrvoje and Kovačić, Saša (2012) Effect of the heating rate in the tempering of DIN 100 V1. = Effect of the heating rate in the tempering of DIN 100 V1. HTM - Haerterei-Technische Mitteilungen, 67 (2). pp. 118-124. ISSN 0341-101X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Cajner, Franjo and Landek, Darko (2012) Posebnosti toplinske obrade alatnih čelika. = Specificities of the heat treatment of tool steels. In: Heat Treatment and Surface Engineering – European Opportunities for Croatian Economy, 11. 05. 2012., Rijeka, Hrvatska.
Landek, Darko and Župan, Josip and Filetin, Tomislav (2012) Systematic analysis of cooling curves for liquid quenchants. = Systematic analysis of cooling curves for liquid quenchants. International Heat Treatment and Surface Engineering, 6 (2). pp. 51-55. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Župan, Josip and Filetin, Tomislav and Landek, Darko (2012) The effect of TiO2 nanoparticles on fluid quenching characteristics. = The effect of TiO2 nanoparticles on fluid quenching characteristics. International Heat Treatment and Surface Engineering, 6 (2). pp. 56-60. ISSN 1749-5148. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Župan, Josip and Filetin, Tomislav and Landek, Darko (2011) Cooling characteristics of the water based nanofluids in quenching. = Cooling characteristics of the water based nanofluids in quenching. In: International Conference MATRIB 2011. : Materials/tribology/Recycling, Vela Luka, Hrvatska.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Šolić, Sanja and Kovačić, Saša (2011) Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. = Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. In: IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Kovačić, Saša (2011) Effect of the heating rate in the tempering of steel grade EN 100 V1. = Effect of the heating rate in the tempering of steel grade EN 100 V1. In: The 3rd IFHTSE-Conference on “Heat Treatment and Surface Engineering of Tools and Dies”., 23-25. 03. 2011, Wels, Austrija.
Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Lübben, Thomas (2011) End-quench hardenability test for gas quenched steels. = End-quench hardenability test for gas quenched steels. Strojarstvo, 53 (1). pp. 33-37. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .
Landek, Darko and Župan, Josip and Filetin, Tomislav (2011) Systematical analysis of cooling curves for liquid quenchants. = Systematical analysis of cooling curves for liquid quenchants. In: The IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.
Cajner, Franjo and Landek, Darko and Leskovšek, Vojteh (2010) Surface modifications of maraging steels used in the manufacture of moulds and dies. = Surface modifications of maraging steels used in the manufacture of moulds and dies. Materiali in Tehnologije, 44 (2). pp. 85-91. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2010). Točan broj autora: 3.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. Journal of Engineering and Technology, 1 (1). pp. 1-9. ISSN 1338-2330. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Cajner, Franjo and Landek, Darko and Rafael, Hrvoje (2010) Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. = Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts. In: 10th International Scientific Conference New Ways in Manufacturing Technologies, 17-19. 06. 2010., Prešov; Slovakia.
Landek, Darko and Cajner, Franjo and Kovačić, Saša and Peharec, Ivan (2010) Utjecaj naknadne oksidacije na otpornost trošenju i korozijsku postojanost nitrokarburiranog čelika. = The effect of post oxidizing of nitrocarburized steel on its wear and corrosion resistance. In: MATRIB 2010, 23.-25.06.2010., Vela Luka; Croatia.
Landek, Darko (2005) Modeli i algoritmi računalnog projektiranja indukcijskog kaljenja. = Models and algorithms for computer-aided planning of induction hardening process. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Landek, Darko (2001) Racunalna simulacija postupka indukcijskog kaljenja. = Computer simulation of the induction hardening procces. Scientific master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
