  |
 | Up a level |
Pilipović, Ana and Valentan, Bogdan and Šercer, Mladen (2016) Influence of SLS processing parameters according to the new mathematical model on flexural properties. = Influence of SLS processing parameters according to the new mathematical model on flexural properties. Rapid prototyping journal, 22 (2). pp. 258-268. ISSN 1355-2546. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Valentan, Bogdan and Pogačar, Dušan and Brajlih, Tomaž and Zupančič Hartner, Tjaša and Pilipović, Ana and Drstvenšek, Igor (2012) Development of a 3D printer for thermoplastic modelling. = Development of a 3D printer for thermoplastic modelling. Materiali in Tehnologije, 46 (6). pp. 589-594. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). .
Valentan, Bogdan and Pilipović, Ana and Brajlih, Tomaž and Sever, Peter and Pahole, Ivo and Ficko, Mirko and Balič, Jože and Drstvenšek, Igor (2012) A fast method to predict the cooling time of wax for investment casting procedure. = A fast method to predict the cooling time of wax for investment casting procedure. Advances in production engineering and management (APEM), 7 (4). pp. 255-263. ISSN 1854-6250. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 8.
Pilipović, Ana and Valentan, Bogdan (2010) EUROMOLD 2010 - svjetski sajam za brzu proizvodnju, alatničarstvo, razvoj i uporabu proizvoda. = EUROMOLD 2010 - world fair for rapid manufacturing, tooling, production and product application. Polimeri : časopis za plastiku i gumu, 31 (3-4). pp. 145-149. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Pilipović, Ana and Šercer, Mladen and Stojanović, Ivan and Brajlih, Tomaž and Drstvenšek, Igor and Valentan, Bogdan (2011) Laminated object manufacturing vs. Fused deposition modeling : machine comparison. = Laminated object manufacturing vs. Fused deposition modeling : machine comparison. In: DAAAM World Symposium "Intelligent Manufacturing and Automation : Power of Knowledge and Creativity" (22 ; 2011), 23.-26.11.2011., Vienna, Austrija.
Pilipović, Ana and Šercer, Mladen and Valentan, Bogdan (2011) Use of low - cost 3D printers and the influence of parameters on the precision and mechanical properties. = Use of low - cost 3D printers and the influence of parameters on the precision and mechanical properties. In: 13th International scientific conference on production engineering, 16-18.06.2011., Biograd na moru, Hrvatska.
Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 21st International DAAAM Symposium, 20-23.10.2010., Zadar; Croatia.
Pilipović, Ana and Valentan, Bogdan and Brajlih, Tomaž and Haramina, Tatjana and Balič, Jože and Kodvanj, Janoš and Šercer, Mladen and Drstvenšek, Igor (2010) Influence of laser sintering parameters on mechanical properties of polymer products. = Influence of laser sintering parameters on mechanical properties of polymer products. In: 3rd International Conference on Additive Technologies iCAT2010, 22-24.09.2010., Nova Gorica; Slovenia.
