Items where Division is "1000 Department of Materials > 1020 Chair of Heat Treatment and Surface Engineering" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | C | D | F | G | K | L | M | P | S | Ć | Ž
Number of items: 24.

B

Bajkovec, Drago (2011) Suvremeni postupci prevlačenja iz parne faze. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

C

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Kovačić, Saša (2011) Effect of the heating rate in the tempering of steel grade EN 100 V1. = Effect of the heating rate in the tempering of steel grade EN 100 V1. In: The 3rd IFHTSE-Conference on “Heat Treatment and Surface Engineering of Tools and Dies”., 23-25. 03. 2011, Wels, Austrija.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Šolić, Sanja and Kovačić, Saša (2011) Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. = Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel. In: IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.

Cajner, Franjo and Šolić, Sanja and Kumić, Ivan and Leskovšek, Vojteh (2011) Effect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel. = Effect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel. In: 3rd International IFHTSE Conference on "Heat treatment and Surface engineering of Tools and Dies", Wels, Austrija.

D

Demeter, Izidor (2011) Keramički alatni materijali. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

F

Faltis, Kristian (2011) Vakuumske peći za toplinsku obradu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

G

Grilec, Krešimir and Ćurković, Lidija and Kumić, Ivan and Baršić, Gorana (2011) Erosion mechanisms of aluminium nitride ceramics at different impact angles. = Erosion mechanisms of aluminium nitride ceramics at different impact angles. Materialwissenschaft und Werkstofftechnik, 42 (8). pp. 712-717. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .

K

Kocijan, Gordan (2011) Metode i sredstva za gašenje u toplinskoj obradi metala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

L

Landek, Darko and Liščić, Božidar and Filetin, Tomislav and Lübben, Thomas (2011) End-quench hardenability test for gas quenched steels. = End-quench hardenability test for gas quenched steels. Strojarstvo, 53 (1). pp. 33-37. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .

Landek, Darko and Župan, Josip and Filetin, Tomislav (2011) Systematical analysis of cooling curves for liquid quenchants. = Systematical analysis of cooling curves for liquid quenchants. In: The IFHTSE 19th Congress, Glasgow, Ujedinjena Kraljevina Velike Britanije i Sj. Irske.

M

Matijević, Božidar and Kumić, Ivan and Alar, Vesna (2011) Modification of the hot work tool steel surface by different thermochemical treatments. = Modification of the hot work tool steel surface by different thermochemical treatments. In: 19th IFHTSE Congress, 17-20.10.2011., Glasgow.

Matijević, Božidar and Kumić, Ivan and Belić, Tomislav (2011) The low temperature aluminising kinetics of hot-work tool steels. = The low temperature aluminising kinetics of hot-work tool steels. In: International Conference on "Heat Treatment and Surface Engineering of Tools and Dies" (3 ; 2011), 23.-25.03.2011., Wels, Austrija.

Matijević, Božidar and Pedišić, Ljiljana (2011) The influence of quenchant composition on the cooling rate. = The influence of quenchant composition on the cooling rate. In: The European Conference of Heat Treatment "Quality in Heat Treatment" (3 ; 2011), 23.-25.03.2011., Wels, Austrija.

Matijević, Božidar and Ćurković, Lidija and Rede, Vera (2011) Characterisation and determination of Ni-P coating sputtering rate. = Characterisation and determination of Ni-P coating sputtering rate. International Journal of Microstructure and Materials Properties, 6 (6). pp. 479-485. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Matijević, Božidar and Ćurković, Lidija and Rede, Vera (2011) Characterization and determination of Ni-P coating sputtering rate. = Characterization and determination of Ni - P coating sputtering rate. International Journal of Microstructure and Materials Properties, 6 (6). pp. 479-485. ISSN 1741-8410. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2011) Properties of different compositions of oils as quenchants. = Properties of different compositions of oils as quenchants. In: IFHTSE Congress (19 ; 2011), 17.-20.10.2011., Glasgow, Škotska.

P

Pedišić, Ljiljana and Matijević, Božidar and Munić, Jasminka (2011) The influence of quenchant composition on cooling rate. = The influence of quenchant composition on cooling rate. Strojarstvo, 53 (1). pp. 53-61. ISSN 0562-1887. Vrsta rada: Original scientific paper. . .

Pustaić, Dragan and Cajner, Franjo (2011) Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. = Influence of hardening and tempering vs. austempering on mechanical and fracture Properties of 65Si7 steel. In: 6th International Conference "Materials Structure and Micromechanics of Fracture, MSMF-6", 28-30.06.2010., Brno; Czech Republic.

S

Slavina, Tomislav (2011) Biokompatibilnost materijala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Spajić, Željko (2011) Izrada provlakača za proizvodnju rotora generatora. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Stupnišek, Mladen and Matijević, Božidar (2011) Heat treatment of tools in a noble gas atmosphere. = Heat treatment of tools in a noble gas atmosphere. In: Vacuum Heat Treatment and Heat Treatment of Tools, 22.-23.11.2011, Jihlava, Republika Češka.

Ć

Ćurković, Lidija and Kumić, Ivan and Grilec, Krešimir (2011) Solid particle erosion behaviour of high purity alumina ceramics. = Solid particle erosion behaviour of high purity alumina ceramics. Ceramics International, 37 (1). pp. 29-35. ISSN 0272-8842. . .

Ž

Židov, Bruno (2011) Utjecaj emulzija na brzinu korozije čeličnog obratka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Župan, Josip and Filetin, Tomislav and Landek, Darko (2011) Cooling characteristics of the water based nanofluids in quenching. = Cooling characteristics of the water based nanofluids in quenching. In: International Conference MATRIB 2011. : Materials/tribology/Recycling, Vela Luka, Hrvatska.

This list was generated on Tue Jun 22 20:26:54 2021 CEST.