Items where Division is "1200 Department of Technology > 1220 Chair of Metal Forming" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: G | K | M | V
Number of items: 8.

G

Groš, Josip and Balder, Damir and Ciglar, Damir and Math, Miljenko (2011) A comparison between the main cutting force of a turning center and that obtained by deform 3D software. = A comparison between the main cutting force of a turning center and that obtained by deform 3D software. In: International Scientific Conference on Production Engineering (13 ; 2011), 16-18.06.2011., Biograd, Hrvatska.

K

Keran, Zdenka and Math, Miljenko and Grizelj, Branko (2011) Eksperimentalna i numerička analiza plitkog gravurnog kovanja kao procesa mikrooblikovanja. = Experimental and numerical analysis of coining process using microforming approach. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (4). pp. 505-510. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .

Keran, Zdenka and Math, Miljenko and Piljek, Petar (2011) Modified hydraulic bulging for determination of flow stress curve. = Modified hydraulic bulging for determination of flow stress curve. In: 10th International Conference on Technology of Plasticity, ICTP 2011, 25-30. 10. 2011., Aachen; Germany.

Keran, Zdenka and Math, Miljenko and Piljek, Petar (2011) Numerical investigation of friction coefficient in coining processes of the same part in different grain sizes. = Numerical investigation of friction coefficient in coining processes of the same part in different grain sizes. In: 13th International Scientific Conference on Production Engineering, 16-18.06.2011., Biograd, Hrvatska.

Keran, Zdenka and Math, Miljenko and Škunca, Marko (2011) Determination of flow stress curve by modified hydraulic bulging. = Determination of flow stress curve by modified hydraulic bulging. Transactions of FAMENA, 35 (3). pp. 13-26. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2011). .

M

Math, Miljenko and Keran, Zdenka and Piljek, Petar (2011) Critical overview of modified hydraulic bulging in determination of flaw stress curve. = Critical overview of modified hydraulic bulging in determination of flaw stress curve. In: International Conference on Innovative Technologies, 01-03. 09. 2011., Bratislava, Slovačka.

Math, Miljenko and Keran, Zdenka and Piljek, Petar (2011) Flow stress curves using modified bulging test. = Flow stress curves using modified bulging test. In: 6th International Working Conference ’’TOTAL QUALITY MANAGEMENT - ADVANCED AND INTELLIGENT APPROACHES’’, 07-11.06.2011., Beograd, Srbija.

V

Vitko, Željko (2011) Usporedba i računalna simulacija kinematike i kinetike dva mehanizma malja mehaničkih preša. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Math, Miljenko.

This list was generated on Wed Jun 23 07:57:30 2021 CEST.