Items where Division is "1200 Department of Technology > 1220 Chair of Metal Forming" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: D | H | K | R | Š
Number of items: 8.

D

Družinec, Dino (2018) Tehnološki proces izrade metalnog obratka savijanjem, prosijecanjem i probijanjem. = Technological process of metal part production by bending, cutting and punching. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Keran, Zdenka.

H

Hrdelja, Tomislav (2018) Konstrukcija modela vretenaste tarne preše. = Design od friction screw press model. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Keran, Zdenka.

K

Keran, Zdenka and Kondić, Živko and Piljek, Petar and Runje, Biserka (2018) Accuracy of model force prediction in closed die coining process. = Accuracy of model force prediction in closed die coining process. Strojniški Vestnik/Journal of Mechanical Engineering, 64 (4). pp. 225-232. ISSN 0039-2480. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 4.

Kotarski, Denis and Piljek, Petar and Brezak, Hrvoje and Kasać, Josip (2018) Chattering free tracking control of a fully actuated multirotor with passively tilted rotors. = Chattering free tracking control of a fully actuated multirotor with passively tilted rotors. Transactions of FAMENA, 42 (1). pp. 1-14. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2017). Točan broj autora: 4.

Krznar, Matija and Kotarski, Denis and Pavković, Danijel and Piljek, Petar (2018) Propeller speed estimation for unmanned aerial vehicles using Kalman filtering. = Propeller speed estimation for unmanned aerial vehicles using Kalman filtering. International Journal of Automation and Control. ISSN 1740-7516. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2017). Točan broj autora: 4. (In Press)

Krznar, Matija and Kotarski, Denis and Piljek, Petar and Pavković, Danijel (2018) On-line inertia measurement of unmanned aerial vehicles using on-board sensors and a bifilar pendulum. = On-line inertia measurement of unmanned aerial vehicles using on-board sensors and a bifilar pendulum. Interdisciplinary description of complex systems, 16 (1). pp. 149-161. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

R

Rožman, Mirko (2018) Numerička simulacija postupka kutne ekstruzije. = Numerical simulation of equal channel angular extrusion. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Keran, Zdenka.

Š

Šehić, Nino (2018) Konstruiranje alata za izradu nosača žice. = Design of a tool for wire carrier production. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Keran, Zdenka.

This list was generated on Tue Jun 22 15:17:20 2021 CEST.