Items where Division is "1200 Department of Technology > 1240 Chair of Polymer Processing" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: G | H | J | K | P | R | Č
Number of items: 15.

G

Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2011) Energy efficient injection moulding of polymers. = Energy efficient injection moulding of polymers. In: 3rd International Scientific Conference Management of Technology - Step to Sustainable Production, 08-10.06.2011, Bol, Hrvatska.

H

Haramina, Tatjana and Jelavić, Tomislav and Šolić, Tomislav and Katalinić, Marko and Pilipović, Ana (2011) Analiza mogućnosti recikliranja diskontinuiranih E-staklenih vlakana. = Analysis of recycling possibilities of discontinuous E-glass fibres. Polimeri : časopis za plastiku i gumu, 32 (2). pp. 52-61. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Haramina, Tatjana and Pilipović, Ana and Jelavić, Tomislav and Šolić, Tomislav (2011) Recikliranje otpada od diskontinuiranih E-staklenih vlakana u građevinskim materijalima. = Recycling of discontinuous E-glass fibers in construction materials. In: International conference on materials, tribology, recycling, 29.06 - 01.07.2011., Vela Luka, Hrvatska.

J

Jambrek, Filip (2011) Primjena polimernih materijala za izradu reduktora. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Jambrek, Filip and Pilipović, Ana and Šercer, Mladen (2011) Application of polymer materials for reducer. = Application of polymer materials for reducer. In: TEAM 2011 (Technics, Education, Argiculture, Management), 3rd International Scientific and Expert Conference of the International TEAM Society, 19.-21.10.2011., Trnava, Slovačka.

K

Kovačec, Miroslav and Pilipović, Ana and Štefanić, Nedeljko (2011) Impact of glass cullet on the consumption of energy and environment in the production of glass packaging material. = Impact of glass cullet on the consumption of energy and environment in the production of glass packaging material. In: Proceedings of the 9th WSEAS International Conference on Environment, Ecosystems and Development - EED '11, 29.-31.12.2011., Montreux, Švicarska.

P

Pezić, Mladen (2011) Konstruiranje kalupa za injekcijsko prešanje plastomernog otpreska - dio mehanizma pištolja. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Pilipović, Ana and Raos, Pero and Šercer, Mladen (2011) Eksperimentalno ispitivanje kvalitete polimernih tvorevina proizvedenih LOM postupkom. = Experimental testing of quality of polymer parts produced by laminated object manufacturing - LOM. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2). pp. 253-260. ISSN 1330-3651. Vrsta rada: Preliminary communication. Kvartili JCR: Q4 (2011). .

Pilipović, Ana and Šercer, Mladen and Stojanović, Ivan and Brajlih, Tomaž and Drstvenšek, Igor and Valentan, Bogdan (2011) Laminated object manufacturing vs. Fused deposition modeling : machine comparison. = Laminated object manufacturing vs. Fused deposition modeling : machine comparison. In: DAAAM World Symposium "Intelligent Manufacturing and Automation : Power of Knowledge and Creativity" (22 ; 2011), 23.-26.11.2011., Vienna, Austrija.

Pilipović, Ana and Šercer, Mladen and Valentan, Bogdan (2011) Use of low - cost 3D printers and the influence of parameters on the precision and mechanical properties. = Use of low - cost 3D printers and the influence of parameters on the precision and mechanical properties. In: 13th International scientific conference on production engineering, 16-18.06.2011., Biograd na moru, Hrvatska.

R

Raos, Pero and Tonković, Zlatko and Šercer, Mladen (2011) Analysis and Prediction of Remaining Life Time of Damaged Polyethylene Gas Pipes. = Analysis and Prediction of Remaining Life Time of Damaged Polyethylene Gas Pipes. KGK. Kautschuk, Gummi, Kunststoffe, 64 (6). pp. 33-39. ISSN 0948-3276. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Raos, Pero and Tonković, Zlatko and Šercer, Mladen (2011) Investigation on electrofusion weld properties of polyethylene gas pipes. = Investigation on electrofusion weld properties of polyethylene gas pipes. In: International Conference on Innovative Technologies IN-TECH 2011, 01-03.09.2011, Bratislava, Slovačka.

Rujnić-Sokele, Maja and Šercer, Mladen and Pilipović, Ana (2011) Plastics in the household waste. = Plastics in the household waste. In: 15th International Research/Expert Conference "Trends in the development of machinery and associated technology" TMT 2011, 12.-18.09.2011., Prag, Češka Republika.

Č

Čatić, Igor and Barić, Gordana and Galić, Kata and Grancarić, Ana Marija and Rogić, Ana and Rujnić-Sokele, Maja and Karavanić, Ivor (2011) Draft of the basic systematization of inorganic and organic macromolecular compounds. = Draft of the basic systematization of inorganic and organic macromolecular compounds. In: 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, 01.-05.2011., Boston, MA; United States.

Čatić, Igor and Pilipović, Ana and Rujnić-Sokele, Maja (2011) Četrdeseta obljetnica usmjerenja Prerada polimera na Fakultetu strojarstva i brodogradnje Sveučilišta u Zagrebu. = 40th Anniversary of Polymer Processing on the Faculty of Mechanical Engineering and Naval Architecture University of Zagreb. Polimeri : časopis za plastiku i gumu, 32 (1). pp. 4-11. ISSN 0351-1871. Vrsta rada: Editorial. . .

This list was generated on Tue Jun 22 20:50:16 2021 CEST.