Items where Division is "1200 Department of Technology > 1240 Chair of Polymer Processing" and Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | G | I | J | P | R | V | Š
Number of items: 17.

B

Barić, Igor (2012) Obrada polimernih materijala odvajanjem čestica. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

G

Godec, Damir and Kramarić, Ines and Šercer, Mladen (2012) Application of reverse engineering in the development of polymer products. = Application of reverse engineering in the development of polymer products. In: International Conference on Innovative Technologies, IN-TECH 2012, Rijeka, Hrvatska.

Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2012) Energy efficient injection moulding of polymers. = Energy efficient injection moulding of polymers. Acta Technica Corviniensis, 5 (1). pp. 103-108. ISSN 2067-3809. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Godec, Damir and Rujnić-Sokele, Maja and Šercer, Mladen (2012) Utjecaj parametara prerade na energijski učinkovito injekcijsko prešanje plastike i gume. = Processing parameters influencing energy efficient injection moulding of plastics and rubbers. Polimeri : časopis za plastiku i gumu, 33 (3-4). pp. 112-117. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

I

Ivandija, Matija (2012) Sistematizacija kalupa za injekcijsko prešanje. = Undergraduate thesis , Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

J

Jambrek, Filip and Šercer, Mladen and Pilipović, Ana (2012) Application of polymers in production of transport vehicles. = Application of polymers in production of transport vehicles. In: TEAM 2012 International Conference of Technique, education, Agriculture & Management, Slavonski Brod, Hrvatska.

Jelavić, Tomislav and Haramina, Tatjana and Pilipović, Ana and Bleiziffer, Jelena (2012) Impact of recycling discontinuous E-glass fibres on building material properties. = Impact of recycling discontinuous E-glass fibres on building material properties. In: 8th Central European Congress on Concrete Engineering, Durability of Concrete Structures, 04.-06.10.2012., Plitvice, Hrvatska.

P

Pilipović, Ana and Godec, Damir and Šercer, Mladen (2012) Influence of orientation and UV radiation on the mechanical properties of FDM prototype. = Influence of orientation and UV radiation on the mechanical properties of FDM prototype. In: 4th International Conference on Additive Technologies iCAT 2012, Maribor, Slovenija.

Pilipović, Ana and Rujnić-Sokele, Maja and Godec, Damir and Šercer, Mladen (2012) Testing of processing and performance properties of marine degradable material. = Testing of processing and performance properties of marine degradable material. Polimeri : časopis za plastiku i gumu, 33 (3-4). pp. 106-111. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

Puljko, Josip and Rujnić-Sokele, Maja and Godec, Damir (2012) Development of innovative sole designed for recreational athletes. = Development of innovative sole designed for recreational athletes. In: TEAM 2012 International Conference of Technique, education, Agriculture & Management, 17.-19.10.2012., Slavonski Brod, Hrvatska.

R

Raos, Pero and Stojšić, Josip and Kalendova, Alena and Mĕřinská, Dagmar and Šercer, Mladen (2012) Study on polyamide 12 / clay nanocomposites by melt - intercalation process. = Study on polyamide 12 / clay nanocomposites by melt - intercalation process. In: 2nd International Conference on Manufacturing Engineering & Management - ICMEM 2012, Prešov, Slovačka.

Rujnić-Sokele, Maja and Barić, Gordana (2012) Understanding bioplastics. = Understanding bioplastics. In: 4th International Scientific Conference: Management of Technology – Step to Sustainable Production, Zagreb, Hrvatska.

Rujnić-Sokele, Maja and Šercer, Mladen and Raos, Pero (2012) Plastične cijevi - pregled materijala i tržišta. = Plastic pipes – review of materials and markets. In: 10th Natural Gas, Heat and Water Conference/ 3rd International Natural Gas, Heat and Water Conference, Osijek, Hrvatska.

Rujnić-Sokele, Maja and Šercer, Mladen and Raos, Pero (2012) Plastične cijevi - pregled materijala i tržišta. = Plastic pipes - review of materials and markets. In: 3. međunarodni skup o prirodnom plinu, toplini i vodi, Osijek, Hrvatska.

V

Valentan, Bogdan and Pilipović, Ana and Brajlih, Tomaž and Sever, Peter and Pahole, Ivo and Ficko, Mirko and Balič, Jože and Drstvenšek, Igor (2012) A fast method to predict the cooling time of wax for investment casting procedure. = A fast method to predict the cooling time of wax for investment casting procedure. Advances in production engineering and management (APEM), 7 (4). pp. 255-263. ISSN 1854-6250. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 8.

Valentan, Bogdan and Pogačar, Dušan and Brajlih, Tomaž and Zupančič Hartner, Tjaša and Pilipović, Ana and Drstvenšek, Igor (2012) Development of a 3D printer for thermoplastic modelling. = Development of a 3D printer for thermoplastic modelling. Materiali in Tehnologije, 46 (6). pp. 589-594. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2012). .

Š

Šercer, Mladen and Godec, Damir and Raos, Pero (2012) From an idea to the final polymer product. = From an idea to the final polymer product. Engineering Review, 32 (1). pp. 41-47. ISSN 1330-9587. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .

This list was generated on Tue Jun 22 11:46:31 2021 CEST.