  |
 | Up a level |
Ahac, Igor (2013) Uklanjanje otopljenog organskog ugljika iz površinskih voda postupkom modificirane koagulacije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.
Alar, Vesna and Alar, Željko and Jakovljević, Suzana and Runje, Biserka (2013) Influence of thermal and electrochemical oxidation on the mechanical and corrosion properties of titanium alloy. = Influence of thermal and electrochemical oxidation on the mechanical and corrosion properties of titanium alloy. Kovove Materialy, 51 (4). pp. 251-256. ISSN 0023-432X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.
Alar, Vesna and Juraga, Ivan and Stojanović, Ivan and Šimunović, Vinko and Borko, Tihomir (2013) Experimental study of imidazoline as an inhibitor of carbon steel in acid media. = Experimental study of imidazoline as an inhibitor of carbon steel in acid media. Materials Testing, 55 (4). pp. 285-289. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 5.
Alar, Vesna and Juraga, Ivan and Stojanović, Ivan and Šimunović, Vinko and Kapor, Frankica (2013) Electrochemical properties of stainless steels in the seawater. = Electrochemical properties of stainless steels in the seawater. In: European Corrosion Congress, EUROCORR 2013, 01-05.09.2013., Estoril; Portugal.
Alar, Vesna and Stojanović, Ivan and Užarević, Ivan and Martinez, Sanja (2013) Fizikalno-kemijska svojstva epoksidnih i poliesterskih premaza nanesenih elektrostatskim naprašivanjem. = Physical and chemical properties of epoxy and polyester coating applied by electrostatic spraying. In: International Conference on Materials, Tribology, Recycling "MATRIB 2013", 27-29.06.2013., Vela Luka, Hrvatska.
Alar, Vesna and Stojanović, Ivan and Židov, Bruno and Ivušić, Franjo (2013) Corrosion resistance of high alloyed materials in 3.5% NaCl solution at elevated temperature. = Corrosion resistance of high alloyed materials in 3.5% NaCl solution at elevated temperature. International Journal of Electrochemical Science, 8 (12). pp. 12476-12486. ISSN 1452-3981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 4.
Alfirević, Ivo (2013) The story about Danubia Adria 1983 - 2013. = The story about Danubia Adria 1983 - 2013. Hrvatsko društvo za mehaniku, Zagreb, -. ISBN 978-953-7539-18-4
Alujević, Neven and Zhao, Guoying and Depraetere, Bruno and Pluymers, Bert and Sas, Paul and Desmet, Wim (2013) ℋ2 optimal vibration control using tuned mass dampers and inertial actuators: comparison of passive and active control effects. = ℋ2 optimal vibration control using tuned mass dampers and inertial actuators: comparison of passive and active control effects. In: AIA-DAGA 2013 Conference on Acoustics, 18.-21.03. 2013., Merano, Italija.
Antić, Goran (2013) Korisničko sučelje za upravljanje industrijskim robotom. = User interface for an industrial robot control. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Ančić, Ivica and Runko Luttenberger, Lidija and Šestan, Ante (2013) The viability of short-sea shipping in Croatia. = The viability of short-sea shipping in Croatia. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (4). pp. 472-481. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.
Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2013) EEDI calculation for passenger and Ro-Ro passenger ships. = EEDI calculation for passenger and Ro-Ro passenger ships. In: International Conference on Design & Operation of Passenger Ships, 20-21.11.2013., London, Velika Britanija.
Arambašić, Đorđe (2013) Optimalizacija robotiziranog MAG zavarivanja u proizvodnji snježnih plugova. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Arsoski, Saša (2013) Mehatronički sustavi za naftno bušenje. = Petroleum drilling mechatronic systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Babić, Dario (2013) Alatni strojevi za visokobrzinsku obradu. = Machine tools for high speed machining. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Babić, Vedran (2013) Idejno rješenje uređaja za kompostiranje. = Conceptual design of composting device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Bach, Neven (2013) Unapređenje poslovnih procesa poduzeća primjenom e-poslovanja. = Improving business processes using enterprise e-business. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Bago, Ivona and Plečko, Vanda and Gabrić Pandurić, Dragana and Schauperl, Zdravko and Baraba, Anja and Anić, Ivica (2013) Antimicrobial efficacy of a high-power diode laser, photo-activated disinfection, conventional and sonic activated irrigation during root canal treatment. = Antimicrobial efficacy of a high-power diode laser, photo-activated disinfection, conventional and sonic activated irrigation during root canal treatment. International Endodontic Journal, 46 (4). pp. 339-347. ISSN 0143-2885. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). .
Bahunek, Zoran (2013) Usporedba metoda unapređenja proizvodnog procesa. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Bajs, Marko (2013) Primjena i specifičnosti modificiranih MAG postupaka. = Application and specific issues of modified MAG processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Balen, Teo (2013) Modeliranje napredovanja pukotina kod cikličkog opterećenja konstantne amplitude. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Božić, Željko.
Baleta, Jakov (2013) Numerička analiza stvaranja filma tekućine na stijenci za primjenu u selektivnoj katalitičkoj redukciji. = Numerical investigation of wallfilm formation for selective catalytic reduction applications. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Baleta, Jakov and Pachler, Klaus and Vujanović, Milan and Duić, Neven (2013) Numerical investigation of wallfilm formation for SCR applications. = Numerical investigation of wallfilm formation for SCR applications. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Balić, Dražen (2013) Dinamička interakcija kogeneracijskog postrojenja i sustava područnog grijanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Ban, Marko and Perković, Luka and Duić, Neven and Penedo, Ricardo (2013) Estimating the spatial distribution of high altitude wind energy potential in Southeast Europe. = Estimating the spatial distribution of high altitude wind energy potential in Southeast Europe. Energy, 57 (1). pp. 24-29. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.
Baranić, Luka (2013) Idejni projekt parnog postrojenja tankera. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šestan, Ante.
Barbarić, Marina (2013) Mikrokogeneracija u niskoenergetskoj kući. = Microcogeneration in low-energy house. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Barić, Edi-Eduard (2013) Primjena postupka zavarivanja samozaštićujućom praškom punjenom žicom za spajanje tračnica. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Barišić, Ante (2013) Svojstva i primjena keramike u motorima s unutarnjim izgaranjem. = Properties and application of ceramics in the internal combustion engine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Filetin, Tomislav.
Barišić, Pavao (2013) Analiza međuovisnosti komponenti energetskog transformatora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Barjašić, Danijel and Božić, Željko (2013) Modeliranje zaostalih naprezanja u zavarenim orebrenim panelima. = Modelling of residual stresses in welded stiffened panels. In: Peti susret Hrvatskog društva za mehaniku, 6.-7. lipnja 2013., Donja Stubica, Hrvatska.
Barković, Denis (2013) Analiza rasklopivosti proizvoda. = Analysis of product disassemblability. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Barle, Jani and Wolf, Hinko and Đukić, Predrag (2013) Experimental verification of the dynamic model for a wind turbine tower. = Experimental verification of the dynamic model for a wind turbine tower. In: Danubia-Adria, 09. - 28. 09. 2013., Primošten, R. Hrvatska.
Bartolec, Janko (2013) Konstrukcija i proračun prikolice za prijevoz košnica za pčele. = Design of trailer for transport of hives for the bees. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Bartolin, Ivan (2013) Sendvič paneli s jezgrom od obnovljivih materijala. = Sandwich panels with core of renewable materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Bartulović, Ante (2013) Bušenje kamena. = Stone drilling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Bartulović, Josipa (2013) Plinska turbina za kombi ciklus. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Barunica, Mario (2013) Ispitivanje mehaničkih svojstava injekcijskih prešanih tijela. = Testing of mechanical properties of injection moulded testing specimens. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Batan, Matija (2013) Vibrirajuća vadilica korjenastog i gomoljastog povrća. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2013) Feasibility of Serbian renewable energy policy in reaching EU2020 goals. = Feasibility of Serbian renewable energy policy in reaching EU2020 goals. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.
Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2013) Increasing wind power penetration into the existing Serbian energy system. = Increasing wind power penetration into the existing Serbian energy system. Energy, 57. pp. 30-37. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.
Batas Bjelić, Ilija and Skokljev, Ivan and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven (2013) Integrating consumer flexibility as virtual storage option in energy system planning. = Integrating consumer flexibility as virtual storage option in energy system planning. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Bauer, Branko and Kralj, Slobodan and Bušić, Matija (2013) Production and application of metal foams in casting technology. = Production and application of metal foams in casting technology. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (6). pp. 1095-1102. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Bauer, Branko and Mahmutović, Almir and Mrvar, Primož (2013) Filling and solidification simulation in hot chamber die casting. = Filling and solidification simulation in hot chamber die casting. In: 14th International Scientific Conference on Production Engineering – CIM 2013, Biograd,, 19-22.06.2013, Biograd, Hrvatska.
Baček, Tomislav and Majetić, Dubravko and Brezak, Danko (2013) Parallel levenberg-marquardt-based neural network with variable decay rate. = Parallel levenberg-marquardt-based neural network with variable decay rate. In: 14th International Scientific Conference on Production Engineering, 19-22.06.2013, Biograd, Hrvatska.
Bačelić Medić, Zlatko and Ćosić, Boris and Duić, Neven (2013) Sustainability of remote communities: 100% renewable island of Hvar. = Sustainability of remote communities: 100% renewable island of Hvar. Journal of Renewable and Sustainable Energy, 5 (4). ISSN 1941-7012. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.
Bašić, Josip and Parunov, Joško (2013) Analitički i numerički proračun dodatne mase kod analize vibracije broda. = Analytical and Numerical Computation of Added Mass in Ship Vibration Analysis. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (2). pp. 1-11. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 2.
Bergman Gašparić, Lana and Schauperl, Zdravko and Mehulić, Ketij (2013) Shear bond strength in Zirconia veneered ceramics using two different surface treatments prior veneering. = Shear bond strength in Zirconia veneered ceramics using two different surface treatments prior veneering. Collegium antropologicum, 37 (1). pp. 121-125. ISSN 0350-6134. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Bergman Gašparić, Lana and Schauperl, Zdravko and Mehulić, Ketij (2013) Utjecaj obrade površine cirkonijevog oksida prije nanošenja obložne keramike na veznu čvrstoću. = Shear bond strength in zirconia Veneered Ceramics using two different surface treatments prior veneering. Collegium antropologicum, 37 (1). pp. 121-125. ISSN 0350-6134. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.
Berković-Šubić, Mihaela (2013) Proračun isporučene i primarne energije obiteljske kuće sa sunčanim toplovodnim sustavom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Bernardić, Makso (2013) Umjeravanje uljne tlačne vage. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Beronić, Hrvoje (2013) Modeliranje dinamike vozila simulacijskim paketom CarSIM. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Bervida, Ivica (2013) Otpornost na abrazijsku eroziju duboko hlađenog nodularnog lijeva. = Abrasion erosion resistance of deep cryogenic treated ductile iron. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.
Bečirović, Tomislav (2013) Utjecaj usitnjavanja zrna na mehanička svojstva aluminijskog odljevka. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Bešlić, Josip (2013) Uređaj za savijanje cijevi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Bister, Ivan (2013) Optimizacija proizvodnih procesa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Bičak, Mateja (2013) Proračun uzdužne granične čvrstoće trupa broda. = Calculation of hull girder ultimate strength. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Bišćan, Petar (2013) Testiranje graničnih opterećenja i funkcionalnosti sustava kontrole zrakoplova AC4. = AC4 airplane control system limit load and operation certification tests. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žanić, Vedran.
Blažević, Ivica (2013) Korozijska oštećenja konstrukcija od nehrđajućih čelika. = Corrosion damages of stainles steel structures. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Blažević, Nikola (2013) Proračun prigona vertikalnog obradnog centra. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Blažinić, Igor (2013) Troškovna optimizacija pogona EL-TO Zagreb. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Bojkovski, Jovan and Arifović, Narcisa and Kartal Dogan, Aliye and Kalemci, Murat and Petruševa, Olgica and Simić, Slavica and Veliki, Tomislav and Zvizdić, Davor and Drnovšek, Janko (2013) Comparison of the Realizations of the ITS-90 over the Range from 83.8058 K to 692.677 K. = Comparison of the Realizations of the ITS-90 over the Range from 83.8058 K to 692.677 K. In: Ninth International Temperature Symposium (ITS9), 19.3.2013. do 23.3.2013., Los Angeles, Sjedinjene Američke Države.
Bolarić, Antonio (2013) Karakterizacija niskotemperaturnog generatora vlažnosti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Boldin, Marko (2013) Slama kao ojačalo u biorazgradivim polimernim kompozitima. = Straw as reinforcement in biodegradable polymeric composites. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.
Bolteković Tkalec, Igor (2013) Udaljeni nadzor vibracijskog stanja stroja. = Remote control of vibrating state of machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Bonačić, Filip and Čanžar, Predrag and Tonković, Zdenko and Surjak, Martin and Kraljević, Dario (2013) Eksperimentalno određivanje parametara čelika za krajnje polne ploče hidrogeneratora. = Experimental Determination of Static and Fatigue Parameters for 34CrMo4 Steel and Their Application. In: 11.savjetovanje HRO CIGRÉ, 10-13.11.2013., Cavtat, Hrvatska.
Borovnjak, Goran (2013) Ekološki prihvatljivi inhibitori korozije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Boroša, Ivan (2013) Proračun čvrstoće plašta spiralnog izmjenjivača. = Stress analysis of spiral heat exchanger housing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.
Bošković, Siniša (2013) Nadzvučna mlaznica raketnog motora. = Supersonic nozzle of the rocket engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Bošković, Tomislav (2013) Primjena vitkih principa pri razvoju proizvoda. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Božiković, Dominik (2013) Integracija električne hvataljke i robota. = Integration of electrical gripper and robot. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Božić, Antonio (2013) Usporedba otpornosti na abrazijsko trošenje različitih materijala. = Comparison of abrasive wear resistance of different materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Božić, Domagoj (2013) Izvlačilište brodova u remontnom brodogradilištu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubenkov, Boris.
Božić, Mladen and Vučetić, Ante and Ilinčić, Petar and Lulić, Zoran (2013) Monitoring and Regulation of Vehicle Brake Tester. = Monitoring and Regulation of Vehicle Brake Tester. In: XXIV International Automotive Conference “Science and Motor Vehicles 2013, 23.-24.04.2013, Beograd, Srbija.
Božić, Tomislav (2013) Sendvič paneli s jezgrom od neobnovljivih materijala. = Sandwich panels with core of non-renewable materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Božić, Željko and Schmauder, Siegfried and Mlikota, Marijo and Hummel, Martin (2013) Fatigue crack growth modelling in welded stiffened panels under cyclic tension. = Fatigue crack growth modelling in welded stiffened panels under cyclic tension. In: 13th International Conference on Fracture 2013, ICF 2013, 16-21.06.2013., Beijing; China.
Božić, Željko and Schmauder, Siegfried and Wolf, Hinko (2013) The Influence of Residual Stresses on Fatigue Crack Growth Rate in Stiffened Panels. = The Influence of Residual Stresses on Fatigue Crack Growth Rate in Stiffened Panels. In: 2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, 11-14. 06. 2013., Dubrovnik-Cavtat, Croatia.
Božić, Željko and Semenski, Damir and Wolf, Hinko (2013) Fracture analysis of plates under lateral load pressure. = Fracture analysis of plates under lateral load pressure. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25-28. 09. 2013., Primošten, Croatia.
Božičević Jurin, Ljerka (2013) Analiza uravnoteženosti klipnih motora. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Božović, Igor (2013) Oblikovanje i praćenje uspješnosti izvršenja posla. = Job design and work performance monitoring. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Brajković, Ivan (2013) Primjena programa Lantek kod računalno upravljanog plazma sustava za rezanje. = Application of lantek software for plasma CNC cutting system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Brajković, Tomislav and Juraga, Ivan and Šimunović, Vinko (2013) Influence of surface treatment on corrosion resistance of cr-ni steel. = Influence of surface treatment on corrosion resistance of cr-ni steel. Engineering Review, 33 (2). pp. 129-134. ISSN 1330-9587. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Bratić, Robert (2013) Proračun opterećenja u koljenom zglobu tijekom ljudskog gibanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Bračun, Dalibor (2013) Korozija u procjepu. = Crevice corrosion. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Breka, Bruno (2013) Tehnički zahtjevi za radiografsko ispitivanje zavarenih spojeva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Brnada, Marko (2013) Revitalizacija industrijske parne turbine. = Revitalistion of industrial steam turbine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Brčić, Ante (2013) Metode u reverzibilnom inženjerstvu. = Methods in reverse engineering. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Brčić, Domagoj (2013) Lijevanje dijela od aluminijske legure. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Bubalo, Ante (2013) Stabilnost modularne acetabularne kape endoproteze kuka. = Determining the load for disassembly of modular acetabular shell. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Budim, Robert (2013) Ispitivanje prokaljivosti visokolegiranih alatnih čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Budimir, Marko (2013) Višeosni glodaći obradni centri. = Multi-axis milling machining centers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Buljac, Andrija (2013) Utjecaj ugradbene visine stražnjeg krila na aerodinamičke sile pri gibanju automobila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Džijan, Ivo.
Buljubašić, Mirza (2013) Uključno- isključna spojka za rad u eksplozivnoj atmosferi. = ON/OFF clutch in the exlosive atmosphere. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Bušić, Dino (2013) Palete i paletizacija - stanje i trendovi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Cajner, Franjo and Kovačić, Saša and Kumić, Ivan and Cajner, Hrvoje (2013) The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. = The influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11.-14.06.2013., Zagreb, Hrvatska.
Cajner, Franjo and Kovačić, Saša and Rafael, Hrvoje and Vugrinčić, Amalija and Šimunović, Vinko (2013) Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. = Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. In: 2nd Mediterranean Conference on Heat Treatment and Surface Engineering & Challenges for Heat Treatment and Surface Engineering, 11-14.06.2013, Cavtat, Hrvatska.
Cajner, Franjo and Landek, Darko and Kumić, Ivan and Vugrinčić, Amalija (2013) Influential factors in the surface-hardness testing of a nitrided layer. = Influential factors in the surface-hardness testing of a nitrided layer. Materiali in Tehnologije, 47 (4). pp. 531-533. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). .
Cajner, Franjo and Leskovšek, Vojteh and Pustaić, Dragan (2013) Correlation between microstructure, hardness and fracture toughness of heat-treated high-speed steel. = Correlation between microstructure, hardness and fracture toughness of heat-treated high-speed steel. In: The 30th DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, 25-28.09.2013., Primošten, Hrvatska.
Capan, Tomislav (2013) Primjena Lean principa u razvoju proizvoda. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Capor, Matija (2013) Ispitivanje gradskih i trekking bicikala prema EN 14764. = Testing of city and trekking bicycles according to EN 14765. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Carek, Ivan (2013) Navarivanje čelika legurom Inconel 625. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Carolan, Declan and Tuković, Željko and Murphy, Neal and Ivanković, Alojz (2013) Arbitrary crack propagation in multi-phase materials using the finite volume method. = Arbitrary crack propagation in multi-phase materials using the finite volume method. Computational Materials Science, 69. pp. 153-159. ISSN 0927-0256. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.
Cash, Philip and Stanković, Tino and Štorga, Mario (2013) An Analysis of Engineers Information Seeking Activity. = An Analysis of Engineers Information Seeking Activity. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE 2013, 04-07.08.2013., Portland, SAD.
Cash, Philip and Škec, Stanko and Štorga, Mario (2013) A bibliometric analysis of the DESIGN 2012 conference. = A bibliometric analysis of the DESIGN 2012 conference. In: ICED 2013, 19-22.08.2013., Seoul, Korea.
Cerovac, Tin (2013) Analiza energetskog sustava Republike Hrvatske pomoću više-scenarijskog pristupa. = Advanced System Analysis Using Scenario Approach - the Case Study of Croatia. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Cerovac, Tin and Ćosić, Boris and Pukšec, Tomislav and Duić, Neven (2013) Advanced System Analysis Using Scenario Approach – the Case Study of Croatia. = Advanced System Analysis Using Scenario Approach – the Case Study of Croatia. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.
Cerovečki, Marko (2013) Primjena elektronske mikroskopije u karakterizaciji nodularnog lijeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.
Cesar, Filip (2013) Nosač solarnog fotonaponskog sustava. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.
Cho, Dae Seung and Hadžić, Neven and Senjanović, Ivo (2013) Influence of Different Restoring Stiffness Formulations on Hydroelastic Response of Large Container Ships. = Influence of Different Restoring Stiffness Formulations on Hydroelastic Response of Large Container Ships. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (3). ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.
Cho, Dae Seung and Hadžić, Neven and Senjanović, Ivo and Vladimir, Nikola (2013) Formulacija konačnih elemenata za analizu vibracija debele ploče bez smične blokade. = Shear locking-free finite element formulation for thick plate vibration analysis. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (3). pp. 256-278. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 4.
Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2013) Approximate natural vibration analysis of rectangular plates with openings using assumed mode method. = Approximate natural vibration analysis of rectangular plates with openings using assumed mode method. International Journal of Naval Architecture and Ocean Engineering, 5 (3). pp. 478-491. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Cigić, Igor (2013) Podmazivanje krutim i plinovitim tvarima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.
Cimera, Špiro (2013) Plinska poroznost kod aluminijskih odljevaka. = Gas porosity at aluminium alloyscastings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Cipek, Mihael and Pavković, Danijel and Petrić, Joško (2013) A control-oriented simulation model of a power-split hybrid electric vehicle. = A control-oriented simulation model of a power-split hybrid electric vehicle. Applied Energy, 101 (SI). pp. 121-133. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Cipek, Mihael and Čorić, Mirko and Škugor, Branimir and Kasać, Josip and Deur, Joško (2013) Dynamic programming-based optimization of control variables of an extended range electric vehicle. = Dynamic programming-based optimization of control variables of an extended range electric vehicle. In: SAE 2013 World Congress & Exhibition, 16-18.04.2013., Detroit, MI, United States.
Criscione, Antonio and Kintea, D. and Tuković, Željko and Jakirlića, Suad and Roismana, I.V. and Tropea, Cameron (2013) Crystallization of supercooled water: A level-set-based modeling of the dendrite tip velocity. = Crystallization of supercooled water: A level-set-based modeling of the dendrite tip velocity. International Journal of Heat and Mass Transfer, 66. pp. 830-837. ISSN 0017-9310. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 6.
Crneković, Mladen and Zorc, Davor and Kunica, Zoran (2013) Mobile robot vision system for object color tracking. = Mobile robot vision system for object color tracking. In: 14th International Scientific Conference on Production Engineering, 19-22.06.2013., Biograd, Hrvatska.
Crnić, Srđan (2013) Konstrukcija pomagala za jačanje donjeg dijela leđa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Cukrov, Alen and Horvat, Tomislav and Vrandečić, Tin (2013) Temperaturno polje neizotermnog turbulentnog mlaza. = Temperature field of nonisothermal turbulent jet. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji ; 11. Konferencija o termografiji, 11.04.2013., Zagreb, Republika Hrvatska.
Cukrov, Alen and Horvat, Tomislav and Vrandečić, Tin and Švaić, Srećko (2013) Neizotermni turbulentni mlaz: analiza smanjenja centralne brzine. = Nonisothermal turbulent jet: analysis of centerline velocity decay. In: Peti susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Republika Hrvatska.
Cundeković, Marko (2013) Povezani podaci u novom ustroju Interneta. = Linked data as new Internet framework. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.
Curman, Dominik (2013) Platforma za zavarivanje nastavka okna ukopanog spremnika goriva. = Platform for welding of the buried fuel tank shaft extension. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Cvetković, Nino (2013) Primjena robotiziranog MIG zavarivanja u proizvodnji kompresijskih stezaljki. = Application of robotized MIG welding in production of compression clamps. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Cvijetić, Gregor (2013) Numeričko modeliranje cirkularne pukotine u debelostjenoj cijevi. = Numerical modelling of circular crack in thick-walled pipe. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Dananić, Mario (2013) Primjena hidrauličkih cilindara u gradnji alatnih strojeva. = Application of hydraulic cylinders in machine tools design. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Daničić, Domagoj (2013) Analiza uzdužne čvrstoće velikog putničkog broda za kružna putovanja u konceptualnoj fazi projekta. = Longitudinal strenght analysis of large cruise ship in concept design phase. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Dedinec, Aleksandar and Markovska, Nataša and Taseska, Verica and Duić, Neven and Kanevce, Gligor (2013) Assessment of climate change mitigation potential of the Macedonian transport sector. = Assessment of climate change mitigation potential of the Macedonian transport sector. Energy, 57. pp. 177-187. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 5.
Dedić, Vedran (2013) Demonstraciski rashladni uređaj s propanom (R290) kao prirodnom radnom tvari. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurko, Tonko.
Dervišević, Dražen (2013) Stol za rezanje stakla (uz manipuliranje sa zračnom strujom). = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Devetak, Dejan (2013) Konstrukcijska prilagodba jurišne puške uvjetima urbanog ratovanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakopčić, Mirko.
Dijanić, Josip (2013) Moderni postupci brušenja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Djelošević, Mirko and Tepić, Jovan and Tanackov, Ilija J. and Kostelac, Milan (2013) Mathematical identification of influential parameters on the elastic buckling of variable geometry plate. = Mathematical identification of influential parameters on the elastic buckling of variable geometry plate. The Scientific World Journal, 2013. ISSN 2356-6140. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.
Doležal, Dubravka and Alar, Vesna and Borko, Tihomir (2013) Inhibition of carbon steel corrosion by imidazoline in carbon dioxide saturated oilfield brine solution. = Inhibition of carbon steel corrosion by imidazoline in carbon dioxide saturated oilfield brine solution. Materialwissenschaft und Werkstofftechnik, 44 (7). pp. 626-632. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Dolinar, Alen (2013) Ispitivanje kvalitete zavarenih aluminijskih odljevaka. = Quality testing of welded aluminium castings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Dominković, Dominik Franjo (2013) Dugoročno energetsko planiranje Primorsko-goranske županije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Domitran, Zoran (2013) Utjecaj odstupanja dimenzija na životni vijek polimernih zupčanika. = Investigation of dimensional tolerances on the polymer gear life. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Dorić, Igor (2013) Unapređenje organizacije i procesa uslužnog poduzeća korištenjem Kaizen metodologije. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Dorocić, Damjan (2013) Utjecaj korozijskih oštećenja na integritet zrakoplova. = Influence of corrosion damage on aircraft integrity. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Draganić, Ivan (2013) Rekonstrukcije kotlovnice bolnice Naftalan. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Družinec, Mirna (2013) Energetska analiza sustava grijanja Nacionalne i sveučilišne knjižnice. = Energy analysis of heating system in national and university library. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Družinec, Mirna and Balen, Igor (2013) Energetska analiza sustava grijanja Nacionalne i sveučilišne knjižnice. = Energy analysis of heating system of National and university library. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji Interklima 2013, 11.04.2013, Zagreb, Hrvatska.
Dubreta, Nikša (2013) Socio-cultural context of Drug Use With Reflections to Cannabis Use in Croatia. = Socio-cultural context of Drug Use With Reflections to Cannabis Use in Croatia. Interdisciplinary description of complex systems, 11 (1). pp. 86-97. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.
Duić, Neven (2013) Journal of Sustainable Development of Energy, Water and Environment Systems – Volume I. = Journal of Sustainable Development of Energy, Water and Environment Systems – Volume I. Journal of Sustainable Development of Energy, Water and Environment Systems, 1 (4). p. 390. ISSN 1848-9257. Vrsta rada: Editorial. . Točan broj autora: 1.
Duić, Neven and Guzović, Zvonimir and Kafarov, Vyatcheslav and Klemeš, Jiri Jaromir and Mathiesen, Brian Vad and Yan, Jinyue (2013) Sustainable development of energy, water and environment systems. = Sustainable development of energy, water and environment systems. Applied Energy, 101. pp. 3-5. ISSN 0306-2619. Vrsta rada: Editorial. Kvartili JCR: Q1 (2013). Točan broj autora: 6.
Dujmović, Marko (2013) Upravljanje projektima zasnovano na lean principima (Lean project management). = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Džoić, Marko (2013) Trajnost matrice za izvlačenje cijevi rashladnih uređaja. = Durability of dies for drawing cooling device pipes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.
El-Saleh, Adel (2013) Značaj kontrole kvalitete materijala za pouzdanost broda u službi. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žiha, Kalman.
Essert, Mario and Bosančić, Boris and Tomić, Marijana and Lončarić, Mario (2013) XML to visual taggs migration : proposed methodologies for the research of digitized Croatian medieval Glagolitic material. = XML to visual taggs migration : proposed methodologies for the research of digitized Croatian medieval Glagolitic material. In: Summer school in the study of historical manuscripts, 26–30.09.2011., Zadar, Hrvatska.
Essert, Mario and Štrkalj Despot, Kristina and Lončarić, Mario and Štimac, Božidar (2013) DocMark & TEIMark - New visual WEB annotation tools for images & documents. = DocMark & TEIMark - New visual WEB annotation tools for images & documents. In: CroArtScia2013 – Asymmetry: Art & Science & Education, 08-11.05.2013., Zagreb, Hrvatska.
Ferdelji, Nenad and Halasz, Boris (2013) Theoretical Comparison of Entropy Production and Exergy Destruction in Evaporative and Air Cooled Recuperative Condenser. = Theoretical Comparison of Entropy Production and Exergy Destruction in Evaporative and Air Cooled Recuperative Condenser. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji i 11. Konferencija o termografiji, 11.04.2013., Zagreb, Hrvatska.
Filimonović, Antiša (2013) Ispitivanje višeslojnih kompozita računalnom radiografijom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Filipović, Marinko (2013) Iskorištavanje otpadne topline iz cementare sustavom ORC. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Firak, Mihajlo and Đukić, Ankica (2013) Hydrogen Economy: State of the Art and Perspectives. = Hydrogen Economy: State of the Art and Perspectives. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.
Flego, Filip (2013) Ispitivanje mehaničkih svojstava čelika povišene čvrstoće AH 32. = Testing of mechanical characteristics of the high tensile steel AH 32. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubenkov, Boris.
Franćeski, Mario (2013) Detonacijski reaktivni motor za zrakoplov visokih performansi. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Gajski, Matija (2013) Konstruiranje kalupa za injekcijsko prešanje dječje igračke. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Galin, Kruno (2013) Ispitivanje mehaničkih spojnica za povezivanje motornih i priključnih vozila. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Garašić, Ivica and Kožuh, Zoran and Kralj, Slobodan and Tomić, Tanja and Glogović, Zlatko (2013) Primjena izmjenične struje kod mag navarivanja legure inconel 625. = Application of alternating current for mag cladding of inconel 625. In: 7. Međunarodno znanstveno-stručno savjetovanje SBZ 2013, Slavonski Brod, Hrvatska.
Gašparović, Goran and Krajačić, Goran and Šare, Anamarija and Duić, Neven (2013) Advanced modelling of an electric vehicle module in the H2RES energy planning software. = Advanced modelling of an electric vehicle module in the H2RES energy planning software. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, 2013-09-22-27, Dubrovnik.
Gerhardinger, David (2013) Cox 020 motor s unutarnjim izgaranjem za pogon zrakoplovnih modela. = Cox 020 - Internal combustion engine for flying models. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Geršić, Tomislav (2013) Uloga premaza u zaštiti od buke. = The role of coating in noise protection. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Geček, Marko (2013) Troškovna optimizacija pogona TE-TO Zagreb. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Gložinić, Matija (2013) Projekt rashladnog sustava supermarketa s ugljik dioksidom kao radnom tvari u donjoj kaskadi. = Design of a refrigeration system in supermarket with CO2 in a lower cascade. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.
Glumac, Milan (2013) Suncobran otvaran koloturnikom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
Godec, Damir and Raos, Pero and Šercer, Mladen (2013) Importance of Rapid Prototyping in Polymer Product Development. = Importance of Rapid Prototyping in Polymer Product Development. In: International Congress on Engineering and Technology ICET 2013, Dubrovnik, Hrvatska.
Gordić, Borislav (2013) Model prilagodljivog planiranja i praćenja proizvodnje. = Model of adaptable production planning and control. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Gotvald, Dražen (2013) Prikaz i analiza skladišta gotove robe. = Overview and analysis of finished goods warehouse. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Gradečak, Tomislav (2013) Održavanje lakih motornih vozila. = Maintenance of light motor vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Gračanin, Adam (2013) Konstruiranje kalupa za injekcijsko prešanje medicinskog pomagala. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Gračner, Igor (2013) Naprava za ožbičenje glavčine s obručem za motociklističke naplatke. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Grgec Bermanec, Lovorka and Zvizdić, Davor and Korade, Tomislav (2013) Interlaboratory Comparison in the Range from 0 to 0, 1 MPa for Croatian Accredited Laboratories. = Interlaboratory Comparison in the Range from 0 to 0, 1 MPa for Croatian Accredited Laboratories. In: Laboratory Competence 2013 & Regional Conformity Assessment Workshop, 6-9. 11. 2013., Opatija, Hrvatska.
Grgić, Martina (2013) Utjecaj životnog vijeka proizvoda na okoliš. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Grgurić, Ivan (2013) Turboekspander za iskorištavanje ekspanzijske energije plina na plinovodima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Grilec, Krešimir (2013) Lijevane bronce drevnih civilizacija. = Cast bronze of ancient civilizations. In: 13th International Foundrymne Conference, Opatija, Hrvatska.
Grilec, Krešimir and Halavanja, Aleksandar and Marić, Gojko (2013) Savijanje čeličnih profila punjenih aluminijskom pjenom. = Bending of steel profiles filled with aluminum foam. In: International Conference on Materials, Tribology, Recycling MATRIB 2013, Vela Luka, Hrvatska.
Grilec, Krešimir and Ivušić, Vinko (2013) Kratka povijest tribologije. = A brief history of tribology. In: International Conference on Materials, Tribology, Recycling MATRIB 2013, Vela Luka, Hrvatska.
Grilec, Krešimir and Marić, Gojko and Alar, Željko (2013) Compression of aluminium foams with different strain rate. = Compression of aluminium foams with different strain rate. In: 3rd International Conference on Mechanical Technologies and Structural Materials, Split, Hrvatska.
Grubešić, Nikola (2013) Uloga inferencijalne statistike u poboljšanju proizvodnih procesa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Hrvoje.
Grđan, Vinko (2013) Procjena istrošenosti medicinskog svrdla primjenom umjetnih neuronskih mreža. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.
Gršeta, Ivan (2013) Optimiranje sheme toplinske stanice u EL - TO Zagreb. = Heat balance optimization of heat station in EL-TO Zagreb. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Gršić, Danijel (2013) Tribologija obloge valjaka za ispitivanje kočnih sila vozila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.
Gržinić, Darko (2013) Primjena sustava za pohranjivanje podataka kod trkaćih automobila. = Data logging and it's implementation in race cars. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Gunjača, Darko (2013) Strukturna analiza rampe za polaganje cjevovoda na morsko dno. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.
Gunjević, Bojan (2013) Djelovanje vjetra na veliki kontejnerski brod. = Wind effects on a large container ship. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje.
Guzović, Zvonimir and Blatarić, Zoran and Rašković, Predrag (2013) The Comparision of a Basic and a Dual‐Pressure Organic Rankine Cycles (ORC): Geothermal Power Plant Velika Ciglena Case Study. = The Comparision of a Basic and a Dual‐Pressure Organic Rankine Cycles (ORC): Geothermal Power Plant Velika Ciglena Case Study. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.
Guzović, Zvonimir and Klun, Mario and Rašković, Predrag (2013) Waste Heat Recovery of Internal Combustion Engine by Organic Rankine Cycle. = Waste Heat Recovery of Internal Combustion Engine by Organic Rankine Cycle. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.
Guć, Luka (2013) Raspored tlaka na lopatice aksijalne turbine (Kaplan). = Pressure distribution on axial impeller blade. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.
Haas, Reinhard and Lettner, Georg and Auer, Hans and Duić, Neven (2013) The looming revolution: How photovoltaics will change electricity markets in Europe fundamentally. = The looming revolution: How photovoltaics will change electricity markets in Europe fundamentally. Energy, 57. pp. 38-43. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1(2013). Točan broj autora: 4.
Hadžović, Emir (2013) Optimizacija procesa održavanja. = Optimization of maintenance processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Hartman, Vanja and Kirac, Mislav and Zanki, Vlasta and Grozdek, Marino and Poletto, Davide and Ronchini, Chiara (2013) Energy Efficiency and Energy Management in Cultural Heritage. = Energy Efficiency and Energy Management in Cultural Heritage. United Nations Development Programme in Croatia, Zagreb, Hrvatska, -. ISBN 978-953-7429-47-8
Heinonen, Martti and Zvizdić, Davor and Šestan, Danijel (2013) Report to the CCT on the Comparison EURAMET.T-K6.1 Bilateral comparison of the realisations of local dew/frost-point temperature scales in the range-70 degrees C to+20 degrees C Participants: HMI/FSB-LPM and MIKES Final. = Report to the CCT on the Comparison EURAMET.T-K6.1 Bilateral comparison of the realisations of local dew/frost-point temperature scales in the range-70 degrees C to+20 degrees C Participants: HMI/FSB-LPM and MIKES Final. Metrologia, 50. 03009-03010. ISSN 0026-1394. Vrsta rada: Editorial. Kvartili JCR: Q2(2013). Točan broj autora: 3.
Hermans, Ralph M. and Lazar, Mircea and Jokić, Andrej (2013) Distributed Lyapunov-based MPC. = Distributed Lyapunov-based MPC. In: Distributed Model Predictive Control Made Easy. Intelligent Systems, Control and Automation: Science and Engineering (69). Springer, Dordrecht, pp. 225-241. ISBN 978-94-007-7006-5; 978-94-007-7005-8
Hižman, Boris (2013) Procjena stanjenja stijenke pomoću računalne radiografije. = Assessment of wall thickness degradation by computed radiography. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Hlupić, Slavko (2013) Simulacija rada Robotskog sustava u programskom okruženju OpenRAVE. = Robotic system simulation in OpenRAVE programming environment. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Hmura, Kristijan (2013) Strategije vođenja pogona mikro mreže. = Micro-grid supervisory control strategies. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Hodak, Valentino (2013) Uređaji za skidanje izolacije sa električnih kabela. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Hodja, Tomislav (2013) Grafičko sučelje robota RM501 MITSUBISHI. = Graphic interface for the RM501 MITSUBISHI robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Hoić, Matija and Herold, Zvonko and Kranjčević, Nenad and Deur, Joško and Ivanović, Vladimir (2013) Experimental characterization and modeling of dry dual clutch thermal expansion effects. = Experimental characterization and modeling of dry dual clutch thermal expansion effects. SAE International Journal of Passenger Cars - Mechanical Systems, 6 (2). pp. 775-785. ISSN 1946-3995. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Hoić, Matija and Jokić, Andrej and Ščap, Dragutin (2013) Determination of Pareto frontier for multi-objective optimization problem. = Determination of Pareto frontier for multi-objective optimization problem. Transactions of FAMENA, 37 (2). pp. 15-28. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Holik, Mario and Krizmanić, Severino and Ferdelji, Nenad and Živić, Marija and Galović, Antun (2013) Zagrijavanje vode prirodnom konvekcijom pomoću horizontalno uronjenog grijača. = Water heating by natural convection with horizontal immersed heater. In: 5. susret Hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.
Holik, Mario and Živić, Marija and Galović, Antun (2013) Thermographic quantitative analysis of temperature field around the moving heat source. = Thermographic quantitative analysis of temperature field around the moving heat source. In: Interklima 2013, 11.4.2013., Zagreb, Hrvatska.
Holik, Mario Janković and Galović, Antun (2013) Teorijska analiza optimalnog režima rada Braytonova ciklusa. = Theoretical analysis of the optimal operation mode of Brayton cycle. In: 11th Natural gas, Heat and Water Conference/ 4th International Gas, Heat and Water Conference, 25-27.09.2013., Osijek, Hrvatska.
Holjevac, Krunoslav (2013) Izmjenjivač topline cijevi u bubnju. = Shell and tube heat exchanger. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Horvat, Ivan (2013) Projekt grijanja stambeno-poslovne zgrade. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Horvat, Ivana (2013) Prostorna lokalizacija objekta korištenjem metode triangulacije. = Spatial object localization using triangulation method. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Horvat, Krunoslav and Mišković, Mato and Mišković, Ivan and Bonačić, Mišo and Korlević, Darko and Kalinić, Maro and Stipišić, Leo and Goga, Ivica and Kurtela, Marin and Mikjel, Gabrijela and Kosić, Dragan and Bakarić, Vedran and Kuljača, Ognjen and Eškinja, Zdravko (2013) Zamjena sustava turbinske regulacije proizvodne jedinice B HE Dubrovnik. = Refurbishment of the turbine governing system of power unit B HPP Dubrovnik. In: 11.savjetovanje HRO CIGRÉ, 10.–13.11.2013., Cavtat, Hrvatska..
Horvat, Krunoslav and Pintarić, Tomislav and Mišković, Ivan and Jagec, Josip and Korlević, Darko and Barulek, Dejan and Stipišić, Leo and Srpak, Dragutin and Kurtela, Marin and Bakarić, Vedran and Eškinja, Zdravko (2013) Zamjena dijela sustava turbinske regulacije na HE Čakovec. = Refurbishment of part of the turbine governing system of HPP Čakovec. In: 11.savjetovanje HRO CIGRÉ, 10.–13.11.2013., Cavtat, Hrvatska..
Horvat, Robert (2013) Upravljanje radom zaklopke Ottova motora. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Horvat, Tomislav (2013) Sortiranje objekata robotom RM501 pomoću vizijskog sustava. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Horvatić, Amalija (2013) Statistički alati i metode u mjeriteljstvu. = Statistical tools and methods in metrology. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Hočevar, Ivan (2013) Trošenje alatnih čelika za izradu štanci. = Wear of tool steels for punches. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Hrabrov, Ana (2013) Karakterizacija niklovih legura. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Hrabrov, Marin (2013) Recikliranje i svojstva papira. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Filetin, Tomislav.
Hrman, Danijela and Rakvin, Marko and Markučič, Damir (2013) Optimization of scanning parameters of computed radiography for characterization of expanded polystyrene. = Optimization of scanning parameters of computed radiography for characterization of expanded polystyrene. Transactions of FAMENA, 37 (3). pp. 53-64. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Hrvoj, Sanjin (2013) Utjecaj mjernog ticala na parametre hrapavosti profila. = The influence of the stylus tip on the profile roughness parameters. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Hršak, Elvis (2013) Alatni strojevi za brušenje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Hublin, Andrea and Schneider, Daniel Rolph and Džodan, Janko (2013) Utilization of biogas produced by anaerobic digestion of agro-industrial waste: energy, economic and environmental effects. = Utilization of biogas produced by anaerobic digestion of agro-industrial waste: energy, economic and environmental effects. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013., Dubrovnik, Hrvatska.
Ivanjko, Josip (2013) Fleksibilan pogon kogeneracijskog postrojenja s gorivim člankom u mikromreži. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Ivančević, Darko and Smojver, Ivica (2013) Micromechanical modelling of damage processes in composite materials. = Micromechanical modelling of damage processes in composite materials. In: 19th International Conference on Composite Materials (ICCM19), Montreal, Kanada.
Ivančević, Darko and Smojver, Ivica (2013) Usporedba mikromehaničkih kriterija popuštanja kompozitnih materijala. = Evaluation of micromechanical failure criteria for composite materials. In: Peti susret Hrvatskog društva za mehaniku, 6-7.06.2013, Donja Stubica, Hrvatska.
Ivančić, Ante (2013) Zelena proizvodnja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Ivelić, Saša (2013) Usporedba modela procjene vremena praznih vožnji transportnih sredstava simulacijama. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Ivković, Ana (2013) Toplovodni kotao na kruto gorivo. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Ivković, Dejan (2013) Optimizacija ruta ambulantne prodaje. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Ivković, Josip (2013) Školjkasti lijev. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Ivušić, Franjo and Lahodny-Šarc, Olga and Alar, Vesna (2013) Corrosion inhibition of carbon steel in various water types by zinc gluconate. = Corrosion inhibition of carbon steel in various water types by zinc gluconate. Materialwissenschaft und Werkstofftechnik, 44 (4). pp. 319-329. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Jagarčec, Tomislav (2013) Analiza naprezanja nosača konzervatora energetskih transformatora. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.
Jagaš, Nataša (2013) Sustav za upravljanje inovacijama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.
Jaklenec, Hrvoje (2013) Regulacija brzine vrtnje hidrauličkog motora na principu promjene protoka radnog fluida. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Jakšetić, Julije and Pečarić, Josip (2013) Exponential convexity method. = Exponential convexity method. Journal of Convex Analysis, 20 (1). pp. 181-197. ISSN 0944-6532. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 2.
Jakšetić, Julije and Pečarić, Josip (2013) Exponential convexity, Euler - Radau expansions and Stolarsky means. = Exponential convexity, Euler - Radau expansions and Stolarsky means. Rad Hrvatske akademije znanosti i umjetnosti. Razred za matematičke, fizičke i kemijske znanosti. Matematičke znanosti, 17. pp. 81-94. ISSN 1845-4100. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2013) O bezmrežnom modeliranju heterogenih materijala. = On meshless modeling of heterogeneous materials. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Janjiš, Ivan (2013) Mala vertikalna vjetroelektrana. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.
Jarak, Ana-Marija (2013) Ergonomsko oblikovanje rukovanja materijalom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Jelančić, Marko (2013) Ispitivanje toplinskih karakteristika ventilokonvektora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Jelaš, Martin (2013) Analize čvrstoće transformatora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Jelić, Ana (2013) Unapređenje proizvodnih procesa poduzeća korištenjem vitkih principa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Jeličić, Anamarija (2013) Biomehanička analiza pločica na zaključavanje za prijelome proksimalnog humerusa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Jenko, Darja and Šolić, Sanja and Leskovšek, Vojteh and Cajner, Franjo and Jenko, Monika (2013) Transmission electron microscopy of PM S390 MC high - speed steel. = Transmission electron microscopy of PM S390 MC high - speed steel. In: IVC-19 / ICN+T 2013 and partner conferences, 9 - 13.09.2013., Pariz, Francuska.
Jergovski, Marko (2013) Punjenje boca sokom od jabuke. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Ji, Lin and Jokić, Marko and Huang, Zhenyu and Alujević, Neven (2013) A simple hybrid approach on predicting the vibration transmission of rib-stiffened plates. = A simple hybrid approach on predicting the vibration transmission of rib-stiffened plates. Transactions of FAMENA, 37 (2). pp. 29-38. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.
Jokić, Andrej and Bosch, P.P.J. van den (2013) Controlling trade-off between reliability and efficiency in power systems. = Controlling trade-off between reliability and efficiency in power systems. In: IEEE International Conference on Networking, Sensing and Control (ICNSC 2013), 10-12.04.2013., Pariz-Evry, Francuska.
Jokić, Andrej and Bosch, P.P.J. van den and Virag, A. and Hendrix, W.H.A. and Puglia, L. and Boer, W. de and Vujanic, R. and Nobel, F. (2013) Reliability and efficiency at global level in power systems. = Reliability and efficiency at global level in power systems. In: 10th International Conference on the European Energy Market, EEM 2013, 27-31.5.2013., Stockholm, Švedska.
Jokić, Marko and Ji, Lin and Huang, Zhenyu and Alujević, Neven (2013) Passive vibration control in mid-frequency region. = Passive vibration control in mid-frequency region. In: 11th International Conference on Vibration Problems ICOVP-2013., 9.–12.09. 2013., Lisabon, Portugal.
Josipović, Franjo (2013) Simulacija rada hibridnog minibusa u standardnim ciklusima vožnje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Josić, Juraj (2013) Projektiranje sustava upravljanja kvalitetom laboratorija za ispitivanje mjerila toplinske energije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Jović, Ivan (2013) Stabilnost modularnog acetabularnog umetka endoproteze kuka. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Jozić, Vjekoslav (2013) CIPM MRA usporedbena mjerenja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Jug, Vanja (2013) Određivanje optimalnih parametara homogenizacije Al2O3-ZrO2 suspenzija. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Juraga, Ivan and Stojanović, Ivan and Remenar, Maja and Rakić, Hrvoje (2013) Usporedba svojstva epoksi i cink silikatnih temeljnih radioničkih premaza. = Comparison of epoxy and zinc - silicate shopprimer properties. In: 7. Međunarodno znanstveno-stručno savjetovanje SBZ 2013, Slavonski Brod, Hrvatska.
Juran, Marin and Stegić, Milenko and Goja, Željko (2013) Analysis of The Bearing Set Influence at The Vibrational Behavior of The Grinding Spindles. = Analysis of The Bearing Set Influence at The Vibrational Behavior of The Grinding Spindles. In: 14th International Scientific Conference on Production Engineering, 19-22.06.2013., Biograd, Hvatska.
Juranić, Jasmin (2013) Simulacija putanje alata za izradu proizvoda iz lima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Jurinjak, Bojan (2013) Kombinirani sustav solarnih kolektora i dizalice topline povezane s tlom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Jurčević Lulić, Tanja and Bratić, Robert and Leder Horina, Jasna (2013) A method of loads assessment in the knee joint for ergonomic practice. = A method of loads assessment in the knee joint for ergonomic practice. In: 5th International Ergonomics Conference, 12-15.06.2013., Zadar, Hrvatska.
Jurčević Lulić, Tanja and Runjak, Mladen (2013) Procjena opterećenja radnika pri podizanju tereta. = Estimation of the Load Acting on the Worker during Lifting Task. Sigurnost : časopis za sigurnost u radnoj i životnoj okolini, 55 (2). pp. 125-131. ISSN 0350-6886. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Kanižaj, Roberto (2013) Projekt grijanja obiteljske kuće. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Kanjir, Petra (2013) Identifikacija i označavanje proizvoda i pakiranja sukladno GS1 pravilima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Kardum, Stipe (2013) Dinamičko ponašanje i dijagnostika brusnih vretena. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stegić, Milenko.
Kasap, Luka (2013) Vitlo mosnog granika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
Kasać, Josip and Stevanović, Stojan and Žilić, Tihomir and Stepanić, Josip (2013) Robust output tracking control of a quadrotor in the presence of external disturbances. = Robust output tracking control of a quadrotor in the presence of external disturbances. Transactions of FAMENA, 37 (4). pp. 29-42. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.
Kasupović, Enes (2013) Trošenje zupčanika automatskog automobilskog mjenjača. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Katić, Katarina (2013) Primjena “Four Step Modela“ na analizu kretanja osobnih automobila s mogućom aplikacijom na energetsko planiranje punjenja električnih vozila – slučaj grada Zagreba. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Katić, Katarina and Perković, Luka and Krajačić, Goran and Duić, Neven and Ban, Marko and Novosel, Tomislav (2013) Application of the Four Step Model in Energy Planning of Electric Vehicles – Case study for the City of Zagreb, Croatia. = Application of the Four Step Model in Energy Planning of Electric Vehicles – Case study for the City of Zagreb, Croatia. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Katić, Marko (2013) Razvoj sustava za interferencijsko umjeravanje etalona duljine metodom faznih pomaka. = Development of interferometric system for calibration of lenght standards using phase shifting method. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Katić, Marko and Šimunović, Vedran and Baršić, Gorana and Mudronja, Vedran (2013) Realization of highest level of traceability for length measurements in Croatia. = Realization of highest level of traceability for length measurements in Croatia. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.
Katić, Višnja and Leder Horina, Jasna and Semenski, Damir and Ježek, Damir and Špalj, Stjepan (2013) Mechanical Properties of Nickel-Titanium Orthodontic Wires with Various Coatings. = Mechanical Properties of Nickel-Titanium Orthodontic Wires with Various Coatings. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25-28.09.2013., Primošten, Hrvatska.
Kedmenec, Željko (2013) Vodna turbina za malu hidroelektranu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Kereković, Snježana (2013) From Technical English to Business English - Developing new Language Skills. = From Technical English to Business English - Developing new Language Skills. Proceedings of the 6th International Language Conference on the Importance of Learning Professional Foreign Languages for Communication between Cultures, 6. pp. 133-137. ISSN 9789-6165. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Kereković, Snježana (2013) Sinonimni nazivi u tehničkom jeziku. = Synonymous terms in technical terminology. Strani jezici : časopis za unapređenje nastave stranih jezika, 42 (20 (1-2). pp. 15-29. ISSN 00351-0840. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Kerolli-Mustafa, Mihone and Bačić, Ivana and Ćurković, Lidija (2013) Investigation of jarosite process tailing waste by means of raman and infrared spectroscopy. = Investigation of jarosite process tailing waste by means of raman and infrared spectroscopy. Materialwissenschaft und Werkstofftechnik, 44 (9). pp. 768-773. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Kirin, Krunoslav (2013) Analiza proizvodnog procesa u tvornici betonskih proizvoda. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Kitarović, Stanislav and Žanić, Vedran and Andrić, Jerolim (2013) Analize progresivnog kolapsa tankostjenih kutijastih nosača opterećenih čistim savijanjem. = Progressive Collapse Analyses of Stiffened Box- Girders Submitted to Pure Bending. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (4). pp. 437-455. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.
Klapač, Josip (2013) Numeričko određivanje mehaničke impendancije rastojnika prigušivača. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.
Klinec, Marko (2013) Projektiranje stolne CNC glodalice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Knežić, Željko (2013) Konstrukcija naprave za opuštanje i rasterećenje kralježnice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Kocijan, Lucija (2013) Analiza izmjene topline na tijelu toplovodnog kotla. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Kocijan, Valentino (2013) Modeliranje i simulacija pogona ORC postrojenja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Kodvanj, Janoš and Beer, Rudolf and Huber, Wolfgang (2013) Mechanical analysis of the weakness of cone – coupling used in modular assembled hip-prosthesis. = Mechanical analysis of the weakness of cone – coupling used in modular assembled hip-prosthesis. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25.–28. 09. 2013., Primošten, Hrvatska.
Kodvanj, Janoš and Sabalić, Srećko and Surjak, Martin and Pamuković, Frane (2013) Utjecaj opterećenja na biomehaničku stabilnost prijeloma distalnog humerusa. = Influence of loading on the biomechanical stability of distal humerus fractures. In: 5. susret hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.
Kodvanj, Janoš and Surjak, Martin and Ćurko, Daria (2013) Stabilnost osteosinteze pločicom kod prijeloma proksimalnog humerusa. = Stability of fixation of proximal humerus fracture using locking plate. In: 5. susret hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.
Koletić, Vjekoslav (2013) Usporedba trošenja rezne oštrice od tvrdog metala s oštricom od kubičnog bor nitrida. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Kolinger, Danijel (2013) Primjena automatski vođenih vozila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Kolovrat, Petar (2013) Regulacija hidrauličkog sustava u realnom vremenu pomoću industrijskog PLC-a. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Komes, Draženka and Belščak-Cvitanović, Ana and Domitran, Zoran and Opalić, Milan (2013) The content of saccharides, antioxidant and sensory properties of pear cultivar „Abate Fetel“ affected by ultrasound pre - treatment and air - drying duration. = The content of saccharides, antioxidant and sensory properties of pear cultivar „Abate Fetel“ affected by ultrasound pre - treatment and air - drying duration. Journal of food and nutrition research, 52 (4). pp. 239-250. ISSN 1336-8672. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 4.
Komljenović, Ante (2013) Modeliranje i regulacija baterijskih i ultrakondenzatorskih sustava za pohranu električne energije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Kondić, Živko and Kondić, Veljko and Kljajin, Milan and Opalić, Milan (2013) Environmental management systems in urban areas - process of ISO 14000 standards series implementation. = Environmental management systems in urban areas - process of ISO 14000 standards series implementation. In: 3rd International Conference "Ecology of Urban Areas 2013", 11.10.2013., Zrenjanin, Srbija.
Korade, Ivan and Virag, Zdravko and Korbar, Radoslav (2013) Analiza pulsirajućeg strujanja u cijevi. = Analysis of oscillatory pipe flow. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Korbar, Radoslav and Korade, Ivan and Mustapić, Nenad (2013) Usporedba shema interpolacije kvazi-2D modela hidrauličkog udara. = Comparisson of interpolation schemes for quasi-2D water hammer model. In: 5. susret Hrvarskog društva za mehaniku, 06-07.06.2013., Terme Jezerčica, Donja Stubica, Hrvatska.
Kos, Hrvoje (2013) Specifične funkcije izvora struje za TIG zavarivanje aluminija. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Kos, Tomislav (2013) Lijevanje bakrenih legura u pješčane kalupe. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Kosanović, Nenad (2013) Projekt konstrukcije pomičnih palubica broda za prijevoz automobila. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Kosir, David (2013) Primjena vitkih principa u vođenju informatičkih projekata. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Kovačić, Filip (2013) Elastoplastična analiza loma orebranih panela izloženih tlaku. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Božić, Željko.
Kovačić, Nikola (2013) Utjecaj mjerne sposobnosti tvrdomjera na rezultate mjerenja tvrdoće Vickersovom metodom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Kovačić, Vedran (2013) Komparativna analiza mehaničkog ponašanja Ni - Ti endodontskih instrumenata opterećenih na savijanje. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Božić, Željko.
Kovačićek, Nikola (2013) Vremenske norme u skladištenju. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Kozarac, Darko and Taritaš, Ivan and Sjerić, Momir (2013) Calculating the Requirement for Additional Intake Charge Conditioning of the Ethanol Fueled Turbocharged Engine. = Calculating the Requirement for Additional Intake Charge Conditioning of the Ethanol Fueled Turbocharged Engine. In: 7th AVL AST International User Conference 2013, 18.-20.06.2013., Graz, Austrija.
Kozarac, Darko and Vuilleumier, David and Saxena, Samveg and Dibble, Robert (2013) Numerical Analysis of Influence of EGR on combustion of Biogas fuelled HCCI engines and the Possibility to Use EGR for reducing the High Intake Temperature Requirements. = Numerical Analysis of Influence of EGR on combustion of Biogas fuelled HCCI engines and the Possibility to Use EGR for reducing the High Intake Temperature Requirements. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27. 09. 2013., Dubrovnik, Hrvatska.
Kozmar, Hrvoje and Juretić, Franjo (2013) Computational modeling of the neutrally stratified atmospheric boundary layer flow using the standard k-ε turbulence model. = Computational modeling of the neutrally stratified atmospheric boundary layer flow using the standard k-ε turbulence model. Journal of Wind Engineering and Industrial Aerodynamics, 115. pp. 112-120. ISSN 0167-6105. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 2.
Koštan, Mario (2013) Utjecaj piezoelektrične anizotropije na dizajn visokotemperaturnih ultrazvučnih sondi. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Krajačić, Goran and Lončar, Dražen and Duić, Neven and Zeljko, Mladen and Lacal Arántegui, Roberto and Loisel, Rodica and Raguzin, Igor (2013) Analysis of financial mechanisms in support to new pumped hydropower storage projects in Croatia. = Analysis of financial mechanisms in support to new pumped hydropower storage projects in Croatia. Applied Energy, 101. pp. 161-171. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 7.
Krajinović, Mario (2013) Korozijski procesi uslijed lutajućih struja na ukopanim i uronjenim konstrukcijama. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Krajinović, Matej (2013) Parnofazni inhibitori korozije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Krajna, Tamara and Alfirević, Ivo and Žiha, Kalman (2013) Povijest, uloga i značaj hrvatskih tehničkih časopisa. = History, role and significance of Croatian technical journals. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Kralj, Slobodan and Klobčar, Damjan and Kožuh, Zoran and Bušić, Matija (2013) Friction stir welding of advanced pore morphology sandwich panels. = Friction stir welding of advanced pore morphology sandwich panels. Zavarivanje, 56 (5/6). pp. 163-172. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Kralj, Slobodan and Marić, Gojko and Kožuh, Zoran and Bušić, Matija and Pugar, Daniel (2013) Tehnologije spajanja aluminijskih pjena. = Joining technologies for aluminium foams. In: International Conference on Materials, Tribology and Recycling MATRIB 2013, Vela Luka, Hrvatska.
Kraljić, Neven (2013) Terenska invalidska kolica. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.
Kramar, Ivan (2013) Metode poslovne inteligencije u procjeni kvarova telefonske infrastrukture. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Kranjčec, Stjepan (2013) Traktorski priključak za vađenje mrkve. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Kranjčević, Nenad and Stegić, Milenko and Vranković, Nikola (2013) A novel algorithm for solving MDOF systems with clearances. = A novel algorithm for solving MDOF systems with clearances. In: The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13), 8-12.09.2013., Jeju, Južna Koreja.
Kranjčević, Nenad and Stegić, Milenko and Vukšić, Mario (2013) Loading of Pipeline Supports in a Micro-tunnel. = Loading of Pipeline Supports in a Micro-tunnel. Transactions of FAMENA, 37 (1). pp. 1-14. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Krcatović, Ivan (2013) Analiza čvrstoće kompozitne konstrukcije trapeznog krila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Krezić, Ivo (2013) Dizalica topline voda-voda za grijanje i hlađenje obiteljske kuće. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Kristović, Pietro (2013) Troslojna perceptronska mreža učena EBP metodom s adaptivnim koeficijentom učenja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.
Krištić, Ivica (2013) Dimenzionalno nanomjeriteljstvo. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Krsnik, Igor (2013) Razvoj sjedalice veslačkog čamca. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Krstić, Dragica and Pavec, Martina and Schauperl, Zdravko (2013) Characterization of Foxing Stains in Eighteenth Century Books. = Characterization of Foxing Stains in Eighteenth Century Books. HDKBR Info – CrSNDT Journal, Listop (12). pp. 32-39. ISSN 1847-9340. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Kufrin, Tomislav (2013) Značajke MIG/MAG zavarivanja izmjeničnom strujom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Kuliš, Ante (2013) Vrlo uskoprolazni viličari - stanje i trendovi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Kunica, Zoran and Lisjak, Dragutin (2013) Mechatronics longa, vita brevis: a concept of handling automaton by transactional analysis and evolutionary computation. = Mechatronics longa, vita brevis: a concept of handling automaton by transactional analysis and evolutionary computation. In: The 2nd regional conference Mechatronics in Practice and Education - MECHEDU 2013, 05-06.12.2013., Subotica, Srbija.
Kupres, Karlo (2013) Ispitivanje mehaničkih svojstva zavarenog spoja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Kurajica, Stanislav and Ćurković, Lidija and Tkalčec, Emilija and Mandić, Vilko (2013) Acid corrosion behavior of sol-gel-prepared mullite ceramics with and without addition of lanthanum. = Acid corrosion behavior of sol-gel-prepared mullite ceramics with and without addition of lanthanum. Journal of the American Ceramic Society, 96 (3). pp. 923-927. ISSN 0002-7820. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.
Kušar, Dominik (2013) Ispitivanje deformacija kaljenih valjaka od čelika 90MnCrV8. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Lach, Mihael (2013) Rotacijsko optiskivanje topničke cijevi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Math, Miljenko.
Lacković, Luka (2013) Model upravljanja potrošnjom energije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Lampl, Daniel (2013) Analiza inercijalnih navigacijskih sustava. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Landek, Darko and Cajner, Franjo and Rafael, Hrvoje and Kovačić, Saša (2013) Influence of heat treatment parameters on the mechanical properties and wear resistance of hs10 - 2 - 5 - 8 high speed steel. = Influence of heat treatment parameters on the mechanical properties and wear resistance of hs10 - 2 - 5 - 8 high speed steel. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, Dubrovnik- Cavtat, Hrvatska.
Landek, Darko and Lisjak, Dragutin and Lübben, Thomas and Frerichs, Friedhelm (2013) Modeling of unavoidable residual stresses after transformation - free cooling. = Modeling of unavoidable residual stresses after transformation - free cooling. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11-14.06.2013., Dubrovnik- Cavtat, Hrvatska.
Landek, Darko and Petrič, Branko and Cajner, Franjo (2013) The induction coils and power supplies for modern heating processes. = The induction coils and power supplies for modern heating processes. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, 11-14.06.2013., Dubrovnik- Cavtat, Hrvatska.
Landek, Darko and Šercer, Mladen and Rujnić-Sokele, Maja and Alar, Vesna and Bauer, Branko and Godec, Damir and Juraga, Ivan and Keran, Zdenka and Kožuh, Zoran and Math, Miljenko and Mihalic, Ivana and Pilipović, Ana and Stojanović, Ivan and Šimunović, Vinko (2013) Materijali i proizvodni postupci. = Materials and production. [UNSPECIFIED]
Larma, Marijana (2013) Analiza potencijala izgradnje postrojenja za proizvodnju peleta iz šumskih ostataka na području Bjelovarsko-bilogorske županije. = Analysis of biomass pellets production potential from forest residues in Bjelovar-bilogora County. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Laslo Jogun, Emina (2013) Fizikalno-kemijska svojstva zaštitnog premaza na čeliku. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Leder Horina, Jasna and Jurčević Lulić, Tanja (2013) Pregled modela koštane pregradnje. = Review of bone remodelling models. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Leko, Ivan (2013) Parna turbina za solarni organski Rankine-ov ciklus. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Lekšić, Ivan (2013) Kvaliteta procesa cinčanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2013) On Boundary Conditions in Multiscale Second-Order Computational Homogenization Scheme. = On Boundary Conditions in Multiscale Second-Order Computational Homogenization Scheme. In: South-East European Conference on Computational Mechanics (3 ; 2013), 12.-14.06.2013, Kos, Grčka.
Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2013) Višerazinsko modeliranje heterogenih materijala. = Multiscale modeling of heterogeneous materials. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Levak, Gabrijel (2013) Leptir ventil DN1500 PN6. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Leš, Marko (2013) Projektiranje i izrada edukacijske makete PID regulatora. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Lijović, Ivan (2013) Planetarni prijenosnik. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Lisak, Tomislav (2013) Zaštitna svojstva emulzija za strojnu obradu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Lisjak, Dragutin and Filetin, Tomislav (2013) Predicting the abrasion resistance of tool steels by means of neurofuzzy model. = Predicting the abrasion resistance of tool steels by means of neurofuzzy model. Interdisciplinary Description of Complex Systems, 11 (3). pp. 334-344. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Lisjak, Nikola (2013) Proračun geometrijske osjetljivosti turbo-profila korištenjem numeričke mehanike fluida i jednadžbi kontinuiranog adjointa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Ljoljo, Dinko (2013) Usporedba različitih postupaka za uklanjanje karbonatne tvrdoće vode. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.
Lončar, Dražen and Balić, Dražen (2013) Impact of fluctuating electricity prices on operation strategy of trigeneration system. = Impact of fluctuating electricity prices on operation strategy of trigeneration system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27, September, 2013, Dubrovnik, Hrvatska.
Lončarević, Vedrana (2013) Formulacija projektnog izraza za graničnu čvrstoću jednoosno tlačno opterećenih elemenata oplate zrakoplova. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žanić, Vedran.
Lovrenić-Jugović, Martina and Tonković, Zdenko and Bakić, Ante (2013) A Constitutive Model for Bovine Cortical Bone under Cyclic Creep-Recovery Loading. = A Constitutive Model for Bovine Cortical Bone under Cyclic Creep-Recovery Loading. In: 12th International Conference on Fracture and Damage Mechanics, 17-19.09.2013., Alghero, Italija.
Lovrenić-Jugović, Martina and Tonković, Zdenko and Slokar, Ljerka (2013) Proces deformiranja epoksidnog kompozita ojačanog staklenim vlaknima. = Deformation Processes of Short-Glass-Fiber-Filled Epoxy. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Lovrić, Domagoj (2013) Primjena polimernih materijala u zimskim sportovima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Lujić, Marko (2013) Tehnike mrežnog planiranja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Lukas, Marin (2013) Loptanje eMIR mobilnog robota. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Lukač, Filip (2013) Utjecaj uzdužnog profila mikrotunela na opterećenje oslonaca cijevi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kranjčević, Nenad.
Lukić, Ingrid (2013) Osnovni algoritam optimiranja kolonijom mrava. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Lulić, Zoran and Missoni, Eduard and Tomić, Rudolf (2013) The Relevance of GHG Emissions from Motor Vehicles. = The Relevance of GHG Emissions from Motor Vehicles. Transactions of FAMENA, 37 (2). pp. 39-56. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Lulić, Zoran and Tomić, Rudolf and Ilinčić, Petar and Šagi, Goran and Mahalec, Ivan (2013) Application of reverse engineering techniques in vehicle modifications. = Application of reverse engineering techniques in vehicle modifications. In: 19th ISPE International Conference on Concurrent Engineering, CE 2012, 03-07.09.2012., Trier; Germany.
Macura, Hrvoje (2013) Kinematički kontroler robota RM501 Mitsubishi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Magić, Marija (2013) Utjecaj dozrijevanja na svojstva aluminijeve legure. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Majcenić, Filip (2013) Projekt sustava grijanja i ovlaživanja staklenika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Malenica, Šime and Senjanović, Ivo and Vladimir, Nikola (2013) Hidrostrukturni problemi u osnivanju ultravelikih kontejnerskih brodova. = Hydro Structural Issues in the Design of Ultra Large Container Ships. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 64 (3). pp. 323-347. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.
Mandić, Viktor (2013) Automatska meteorološka mjerna postaja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Maračić, Bojan (2013) Optimiranje sheme toplinske stanice u TE-TO Zagreb. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Marenić, Eduard (2013) Modeliranje prijelaza s atomističkog modela na makro razini u mehanici čvrstih tijela. = Atomistic-to-continuum modelling in solid mechanics. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sorić, Jurica.
Marenić, Eduard and Ibrahimbegovic, Adnan and Sorić, Jurica and Guidault, Piere-Alain (2013) Homogenized elastic properties of graphene for small deformations. = Homogenized elastic properties of graphene for small deformations. Materials, 6 (9). pp. 3764-3782. ISSN 1996-1944. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.
Marić, Ivo (2013) Biomehanika ovojnice oka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Maričić, Hrvoje (2013) Utjecaj intraabdominalnog tlaka na kralježnicu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Marjanović, Dorian (2013) Perspectives on design creativity and innovation research. = Perspectives on design creativity and innovation research. International Journal of Design Creativity and Innovation, 1 (1). pp. 1-42. ISSN 2165-0349. Vrsta rada: Editorial. . Točan broj autora: 1.
Marković, Marija (2013) Obnovljivost rezultata mjerenja debljine sloja premaza. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Marković, Marijan (2013) Nesigurnost rezultata mjerenja odstupanja od ravnosti mjernih ploča. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Marković, Tihomir (2013) Karakterizacija materijala krunskog svrdla. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Markovska, Nataša and Duić, Neven and Guzović, Zvonimir and Mathiesen, Brian Vad and Lund, Henrik (2013) Our common future - 25 years later: Sustainable development WHATs, HOWs and WHOs of energy, water and environment systems. = Our common future - 25 years later: Sustainable development WHATs, HOWs and WHOs of energy, water and environment systems. Energy, 57. pp. 1-3. ISSN 0360-5442. Vrsta rada: Editorial. Kvartili JCR: Q1 (2013). Točan broj autora: 5.
Markučič, Vedrana (2013) Utjecaj promjene istisnine i uzdužnog nagiba na otpor potopljenog dijela jedrilice. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Džijan, Ivo.
Martan, Boško (2013) Vodna turbina za malu hidroelektranu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Martinec, Tomislav (2013) Vizualizacija tijeka procesa i sljedivosti informacija u razvoju proizvoda. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Martić, Ivana (2013) Istraživanje utjecaja dinamičke oplakane površine na otpor poludeplasmanske forme. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Marušić, Ante and Lončar, Dražen (2013) Modela based operating strategy of combined cycle cogeneration plant. = Modela based operating strategy of combined cycle cogeneration plant. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22.-27.09.2013., Dubrovnik, Hrvatska.
Matak, Nikola (2013) Proračun moguće proizvodnje električne energije iz planiranih vjetroelektrana na području Dubrovačko-neretvanske županije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Math, Dino (2013) Razvoj polimernog proizvoda - zaštita "pametnog mobilnog telefona". = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Matijašević, Dubravko and Terze, Zdravko (2013) An approach for the spatial coupling of multibody system chain in a partitioned algorithm. = An approach for the spatial coupling of multibody system chain in a partitioned algorithm. In: ECCOMAS Thematic Conference on Multibody Dynamics 2013, 01-04.07.2013., Zagreb; Croatia.
Matijević, Božidar (2013) A low temperature aluminizing treatment of hot work tool steel. = A low temperature aluminizing treatment of hot work tool steel. Transactions of FAMENA, 37 (1). pp. 29-34. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). .
Matijević, Božidar (2013) A model of vanadium carbide growth on steel surfaces obtained by thermo reactive deposition. = A model of vanadium carbide growth on steel surfaces obtained by thermo reactive deposition. JOM, 65 (11). pp. 1395-1402. ISSN 1047-4838. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 1.
Matijević, Božidar and Pedišić, Ljiljana and Augusta, Domagoj (2013) Influence of additive chemistry on the physical- chemical and cooling properties of quenching oils. = Influence of additive chemistry on the physical - chemical and cooling properties of quenching oils. In: 2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, 11. -14. 06. 2013., Cavtat, Hrvatska.
Matić, Ivan (2013) Model bolida Formula Student za program CarSim. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Matota, Davor (2013) Tehnologija gradnje trupa broda za prijevoz teških tereta. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubenkov, Boris.
Maček, Marko (2013) Utjecaj pjene na apsorpciju udarca u balističkim kacigama. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Mažar, Miroslav (2013) Mapiranje procesa poduzeća. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Medić, Srđan and Runje, Biserka and Groš, Josip and Markučič, Damir (2013) Implementacija zahtjeva norme ISO/TS 29001:2010 u hrvatske proizvodne tvrtke. = Implementation of ISO/TS 29001:2010 requirements in Croatian production companies. In: 13.hrvatska konferencija o kvaliteti i 4.znanstveni skup hrvatskog društva za kvalitetu, 09–11.05.2013., Brijuni, Hrvatska.
Medić, Srđan and Runje, Biserka and Groš, Josip and Markučič, Damir (2013) Postupci primjene norme ISO/TS 29001:2010 u proizvodnim tvrtkama RH. = Procedures for the implementation of ISO/TS 29001:2010 in the Croatian manufacturing companies. Tehnički glasnik, 7 (3). pp. 306-310. ISSN 1864-6168. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Mejaš, Igor (2013) .Regulacija hidrauličkog sustava u realnom vremenu pomoću industrijskog PLC-a. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Meter, Zvonimir (2013) Dizalica topline voda-voda za grijanje i hlađenje turističkog objekta. = Water-to-water heat pump for heating and cooling tourist building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Mešin, Filip (2013) Primjena metode stabla odlučivanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Midžić, Ida and Marjanović, Dorian (2013) Estimation of environmental effects in early product development. = Estimation of environmental effects in early product development. In: 5th International Congres of International Association of Societies of Design Research "Consilience and Innovation in Design", 26 - 30.08.2013., Tokyo, Japan.
Mihajlović, Zoran (2013) Uklanjanje prekursora dezinfekcijskih nusprodukata adsorpcijom na aktivnom ugljenu u granulama. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.
Mihalic, Ivana and Unkić, Faruk and Bauer, Branko (2013) Čvorićasti grafit u debelostijenim odljevcima - mehanizmi nastanka i utjecajni faktori. = Chunky graphite in heavy section castings- mechanisms of formation and leverage factors. Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo, 55 (2). pp. 52-62. ISSN 1330-2132. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mihalic, Ivana and Unkić, Faruk and Bauer, Branko (2013) Ćvorićasti grafit u debelostijenim odljevcima - mehanizmi nastanka i utjecajni faktori. = Chunky graphite in heavy section castings - mechanisms of formation and leverage factors. In: 13th International Foundrymen Conference ; Innovative Foundry Processes and Materials, 16-17.05.2013, Sisak, Republika Hrvatska.
Mihalic, Tomislav (2013) Virtualno sučelje nastavnih maketa mikrokontrolera. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Mihalinec, Dominik (2013) Upravljanje magnetskim i ultrazvučnim odstranjivačima kamenca. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.
Mihalić, Tihomir and Guzović, Zvonimir and Predin, Andrej (2013) Performances and flow analysis in the centrifugal vortex pump. = Performances and flow analysis in the centrifugal vortex pump. Journal of Fluids Engineering, Transactions of the ASME, 135 (1). 011002-1. ISSN 0098-2202. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.
Mihić, Dejan (2013) Sistematizacija alata za ekstrudiranje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Mihoci, Luka (2013) Analiza rada HCCI motora pri pogonu etanolom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Mikolčević, Marija (2013) Skladištenje voća poslije berbe u uvjetima kontrolirane atmosfere. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurko, Tonko.
Mikulandrić, Robert and Krajačić, Goran and Duić, Neven and Gennadii, Khavin and Lund, Henrik and Vad Mathiesen, Brian and Østergaard, Poul (2013) Performance analysis of hybrid district heating system. = Performance analysis of hybrid district heating system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, 22-27.09.2013, Dubrovnik, Hrvatska.
Mikulandrić, Robert and Lončar, Dražen and Böhning, Dorith and Böhme, Rene (2013) Biomass gasification process modelling approaches. = Biomass gasification process modelling approaches. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22.-27.09.2013., Dubrovnik, Hrvatska.
Mikulandrić, Robert and Lončar, Dražen and Cvetinović, Dejan and Spiridon, Gabriel (2013) Improvement of existing coal fired thermal power plants performance by control systems modifications. = Improvement of existing coal fired thermal power plants performance by control systems modifications. Energy, 57. pp. 55-65. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Duić, Neven (2013) CFD Simulation of Co-combustion of Biomass and Coal in a Cement Calciner. = CFD Simulation of Co-combustion of Biomass and Coal in a Cement Calciner. In: 8th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES 2013, 22.-27.09.2013., Dubrovnik, Hrvatska.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2013) Calcination Modelling for Cement Industry – Latest Development in FIRE. = Calcination Modelling for Cement Industry – Latest Development in FIRE. In: AVL Advanced Simulation Technologies (AST) International User Conference 2013, 18.-20.06.2013., Graz, Austria.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2013) Computational Fluid Dynamic Simulation of Wooden Biomass Combustion. = Computational Fluid Dynamic Simulation of Wooden Biomass Combustion. In: 6th European Combustion Meeting, 25.-28.06.2013., Lund, Švedska.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Priesching, Peter and Tatschl, Reinhard and Duić, Neven (2013) Numerical analysis of cement calciner fuel efficiency and pollutant emissions. = Numerical analysis of cement calciner fuel efficiency and pollutant emissions. Clean Technologies and Environmental Policy, 15 (3). pp. 489-499. ISSN 1618-954X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 6.
Mikulčić, Hrvoje and Vujanović, Milan and Duić, Neven (2013) CFD Simulation of Pulverized Coal Combustion in a Cement Calciner. = CFD Simulation of Pulverized Coal Combustion in a Cement Calciner. In: 8th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES 2013, 22.-27.09.2013., Dubrovnik, Hrvatska.
Mikulčić, Hrvoje and Vujanović, Milan and Duić, Neven (2013) Reducing the CO2 emissions in Croatian cement industry. = Reducing the CO2 emissions in Croatian cement industry. Applied Energy, 101. pp. 41-48. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Mikulčić, Hrvoje and Vujanović, Milan and Markovska, Nataša and Filkoski, Risto V. and Ban, Marko and Duić, Neven (2013) CO2 emission reduction in the cement industry. = CO2 emission reduction in the cement industry. Chemical Engineering Transactions, 35. pp. 703-708. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.
Mikulčić, Neven (2013) Upravljanje pumpama varijabilnog volumena. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.
Miletić, Matija (2013) Stroj za usitnjavanje biljnih ostataka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Milić, Vladimir and Kasać, Josip and Majetić, Dubravko (2013) A back propagation through time-like min–max optimal control algorithm for nonlinear systems. = A back propagation through time-like min–max optimal control algorithm for nonlinear systems. Optimal Control Applications and Methods, 34 (3). pp. 364-378. ISSN 0143-2087. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.
Milla, Marko (2013) Konstruiranje kalupa za injekcijsko prešanje plastomernog poklopca. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Miller, S.T. and Jasak, Hrvoje and Boger, D.A. and Paterson, E.G. and Nedungadi, A. (2013) A pressure-based, compressible, two-phase flow finite volume method for underwater explosions. = A pressure-based, compressible, two-phase flow finite volume method for underwater explosions. Computers and Fluids, 87. pp. 132-143. ISSN 0045-7930. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 5.
Milutinović, Milan and Kranjčević, Nenad and Deur, Joško (2013) Multi-mass dynamic model of a variable-length tether used in a high altitude wind energy system. = Multi-mass dynamic model of a variable-length tether used in a high altitude wind energy system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Milutinović, Milan and Čorić, Mirko and Deur, Joško (2013) Optimal control of a Magnus effect-based high altitude wind power production system. = Optimal control of a Magnus effect-based high altitude wind power production system. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Mimica, Dragomir (2013) Projekt sustava klimatizacije proizvodne hale. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Mirt, Kristian (2013) Adaptivna regulacija servopogona s izraženim promjenama momenta inercije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.
Mićić Hot, Jadranka and Jakšetić, Julije (2013) Matematika I, predavanja i vježbe. = Mathematics I, Lectures and exercises. [Teaching Resource] (Unpublished)
Mićić Hot, Jadranka and Jakšetić, Julije (2013) Matematika II, predavanja i vježbe. = Mathematics II, Lectures and exercises. [Teaching Resource] (Unpublished)
Mićić Hot, Jadranka and Moslehian, Mohammad Sal and Kian, Mohsen (2013) Operator inequalities of Jensen type. = Operator inequalities of Jensen type. Topological Algebra and its Applications, 1 (Jan 20). pp. 9-21. ISSN 2299-3231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mićić Hot, Jadranka and Moslehian, Mohammad Sal and Kian, Mohsen (2013) An operator inequality and its consequences. = An operator inequality and its consequences. Linear Algebra and Its Applications, 439 (3). pp. 584-591. ISSN 0024-3795. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.
Mićić Hot, Jadranka and Perić, Jurica and Pečarić, Josip (2013) Refined Jensen's operator inequality with condition on spectra. = Refined Jensen's operator inequality with condition on spectra. Operators and matrices, 7 (2). pp. 293-308. ISSN 1846-3886. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mićić Hot, Jadranka and Perić, Jurica and Pečarić, Josip (2013) Refined converses of Jensen's operator inequality. = Refined converses of Jensen's operator inequality. Journal of inequalities and applications (353). pp. 1-16. ISSN 1029-242X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Mićić Hot, Jadranka and Pečarić, Josip and Perić, Jurica (2013) Refined converses of Jensen's inequality for operators. = Refined converses of Jensen's inequality for operators. Journal of Inequalities and Applications, 2013. pp. 1-16. ISSN 1029-242X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.
Mišković, Julijana (2013) Projekt sustava niskotemperaturnog grijanja stambene zgrade. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Mladineo, Tonko (2013) Proračun kombiniranog plinsko-parno turbinskog postrojenja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.
Močibov, Petra (2013) Konstrukcija nosivog sklopa cestovne opreme. = Support structure design for road equipment. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Mrvoš, Marina (2013) Postupak umjeravanja mjerila za unutarnja mjerenja. = Procedure for calibration of dial gauges for internal measurement. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahović, Sanjin.
Mudronja, Domagoj and Vanmeert, Frederik and Hellemans, Kevin and Fazinić, Stjepko and Janssens, Koen and Tibljaš, Darko and Rogošić, Marko and Jakovljević, Suzana (2013) Efficiency of applying ammonium oxalate for protection of monumental limestone by poultice, immersion and brushing methods. = Efficiency of applying ammonium oxalate for protection of monumental limestone by poultice, immersion and brushing methods. Applied Physics A: Materials Science and Processing, 111 (1). pp. 109-119. ISSN 0947-8396. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 8.
Mudronja, Vedran (2013) Kontrolna karta - slika procesa. = Control chart - image of process. In: 13. Hrvatska konferencija o kvaliteti i 4. znanstveni skup Hrvatskog društva za kvalitetu, 09-11.05.2013., Brijuni, Hrvatska.
Mudronja, Vedran and Baršić, Gorana and Šimunović, Vedran and Katić, Marko (2013) Traceability for right angle in Croatian National Laboratory for Length. = Traceability for right angle in Croatian National Laboratory for Length. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.
Mueller, Andreas and Terze, Zdravko (2013) Is There an Optimal Choice of Configuration Space for Lie Group. = Is There an Optimal Choice of Configuration Space for Lie Group. In: The ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013), 04-07.08.2013., Portland, Oregon.
Mulc, Tihomir and Udiljak, Toma and Ciglar, Damir (2013) Tool monitoring system - modular structure. = Tool monitoring system - modular structure. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (5). pp. 871-876. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Muminović, Adil and Repčić, Nedžad and Žeželj, Dragan (2013) The efficiency of worm gears lubricated with oils of mineral and synthetic bases. = The efficiency of worm gears lubricated with oils of mineral and synthetic bases. Transactions of FAMENA, 37 (4). pp. 65-72. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Mustafa, Manal and Novosel, Tomislav and Gašparović, Goran and Duić, Neven and Krajačić, Goran (2013) Desalination and Water Storage Modeling in H2RES Energy Planning Model. = Desalination and Water Storage Modeling in H2RES Energy Planning Model. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.
Muža, Marko (2013) Analiza gubitka stabilnosti kompozitne konstrukcije krila. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Müller, Andreas and Terze, Zdravko (2013) Is there an optimal choice of configuration space for lie group integration schemes applied to constrained MBS? = Is there an optimal choice of configuration space for lie group integration schemes applied to constrained MBS? In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2013, 04-07.08.2013., Portland, OR; United States.
Naglić, Matija (2013) Mjerenje ljudskog gibanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Navijalić, Marko (2013) Analiza inovacija u automobilskoj industriji. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Nikitović, Tamara (2013) Mjerenje protoka tekućina u zatvorenim cjevovodnim sustavima ultrazvučnim protokomjerom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Nikl, Vedran (2013) Analiza korekcije rezultata mjerenja dubine brazde na interferometrijskom mikroskopu Epival - Interphako. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahović, Sanjin.
Nikolić, Boris (2013) Sklapanje i ispitivanje funkcionalnosti laboratorijske makete s istosmjernim motorom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Ninić, Ante (2013) Hladno valjanje aluminijskih limova i folija. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Math, Miljenko.
Nižić, Joško (2013) Komore za dozrijevanje banana. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurko, Tonko.
Novak, Filip (2013) Projektiranje posmične osi kod CNC alatnih strojeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Novak, Igor (2013) Laser i njegova primjena u postupcima obrade odvajanjem. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Novak, Tomislav (2013) Korozija u procijepu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2013) Control of nanorobot motion in a quantum alpha field. = Control of nanorobot motion in a quantum alpha field. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.
Novina, Juraj (2013) Elektrokemijska svojstva nehrđajućih čelika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Novogradec, Marko (2013) Analiza odnosa varijacija kutne brzine radilice i momenta sile. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Novosel, Dean (2013) Trošenje mlaznice za pjeskarenje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Novosel, Tomislav and Irsag, Bojan and Pukšec, Tomislav and Duić, Neven (2013) Economic viability of biogas plants in relation to raw material input and transportation methods. = Economic viability of biogas plants in relation to raw material input and transportation methods. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Novosel, Tomislav and Pukšec, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Mohsen, S. Mousa and Ashhab, S. Moh'd and Ababneh, K. Amer (2013) The influence of renewable energy sources on Jordan's current energy system. = The influence of renewable energy sources on Jordan's current energy system. In: International Conference on Integrated Renewable Energy, Desalination and Water Supply - IREDeW, 7-9.10.2013, Amman, Jordan.
Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Lund, Henrik and Mathiesen, V. Brian and Mohsen, S. Mousa and Ashhab, S. Moh'd and Ababneh, K. Amer (2013) The desalination module in the EnergyPLAN advanced energy system analyses tool: a case study for Jordan. = The desalination module in the EnergyPLAN advanced energy system analyses tool: a case study for Jordan. In: International Conference on Integrated Renewable Energy, Desalination and Water Supply - IREDeW, 7-9.10.2013, Amman, Jordan.
Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Mohsen, Mousa and Ashhab, Sami and Ababneh, Amer (2013) Potential for the penetration of renewable energy sources in Jordan’s energy system. = Potential for the penetration of renewable energy sources in Jordan’s energy system. In: CAPE FORUM 2013, 7-10.04.2013., Graz, Austrija.
Novosel, Tomislav and Ćosić, Boris and Krajačić, Goran and Duić, Neven and Mohsen, S. Mousa and Ashhab, S. Moh'd and Ababneh, K. Amer (2013) The Influence of Renewable Energy Sources and Energy Storage Technologies on Fuel Consumption in Jordan. = The Influence of Renewable Energy Sources and Energy Storage Technologies on Fuel Consumption in Jordan. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.
Novoselović, Daniel and Budić, Ivan and Bauer, Branko (2013) Mjerenje zaostalih naprezanja u radijatorskom članku. = Measurement of residual stres on radiator column. Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo, 55 (3-4). pp. 101-104. ISSN 1330-2132. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Nuić, Kristijan (2013) Primjena ferografije u održavanju. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Nujić, Bruno (2013) Konstrukcije sklopa za prisilno hlađenje na postavu suhe tarne spojke. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kranjčević, Nenad.
Obrovac, Karlo and Udiljak, Toma and Vuković Obrovac, Jadranka and Nižetić, Josip and Mutka, Alan (2013) 3D foot surface scanning for the purpose of foot orthotics production. = 3D foot surface scanning for the purpose of foot orthotics production. In: MIT & SLIM 2013, 22-24. 09.2013., Fiesa, Slovenija.
Obrovac, Matej (2013) Suvremeni postupci glodanja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Olivari, Luka (2013) Automatska izmjena obradaka paletnim sustavom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Olrom, Luka (2013) Opskrbni brod za prijevoz posade u ulozi ophodnog broda obalne straže. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grubišić, Izvor.
Opetuk, Tihomir and Đukić, Goran (2013) Interrelations of the Green Supply Chain Management with LCA, PLM, PLCM, LCM – literature survey. = Interrelations of the Green Supply Chain Management with LCA, PLM, PLCM, LCM – literature survey. In: Management of Technology Step to Sustainable Production MOTSP 2013, 29.-31.05.2013., Novi Vinodolski, Croatia.
Oreški, Igor (2013) Retrofiting glavnog pogona glodalice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Pacadi, Jurica (2013) Trošenje dijelova poljeprivredne mehanizacije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Padovan, Maksimilijan (2013) Projekt ispitne komore za mjerila relativne vlažnosti. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Palajsa, Antun (2013) Mehanizmi zaštite od buke u industriji. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Pale, Viktor (2013) Postupak usporedbenog umjeravanja otporničkih termometara. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Panić, Nenad (2013) Trošenje bokova kola pužnih prijenosnika. = Wear of worm heels tooth face. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Opalić, Milan.
Papa, Tihomir (2013) Razvoj kućišta za etalone nano-hrapavosti LFSB-a. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahović, Sanjin.
Papec, Marko (2013) Utjecaj materijala kompozita na parametre strojne obrade. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Parunov, Joško and Gledić, Ivana and Garbatov, Yordan Y. and Guedes Soares, Carlos (2013) Fatigue assessment of corroded deck longitudinals of tankers. = Fatigue assessment of corroded deck longitudinals of tankers. International Journal of Maritime Engineering, 155 (PART A). A9-A21. ISSN 1479-8751. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 4.
Parunov, Joško and Ćorak, Maro (2013) Structural reliability of ULCS - the concept. = Structural reliability of ULCS - the concept. In: 2nd Internatonal Workshop on springing and whipping of ships, 08-10.11.2012., Split, Hrvatska.
Parunov, Joško and Ćorak, Maro and Gilja, Ivan (2013) Calculated and prescribed stress concentration factors of ship side longitudinal connections. = Calculated and prescribed stress concentration factors of ship side longitudinal connections. Engineering Structures, 52. pp. 629-641. ISSN 0141-0296. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Pavalić, Martin (2013) Djelovanje ekoloških inhibitora na brzinu korozije ugljičnog čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Pavelić, Marko (2013) Izrada računalnog programa za proračun primarne energije sustava za grijanje, hlađenje i klimatizaciju prostora i pripremu potrošne tople vode. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Pavić, Andrej (2013) Određivanje elektrokemijskog potencijala Mg anoda. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Pavić, Andrej and Kodvanj, Janoš and Sabalić, Srećko and Čukelj, Fabijan and Bakota, Bore (2013) Novel external fixation fracture method with circular locking mechanism compared with the application of dynamic axial external fixator on experimental tibial model ensures better stability in bending and favourable performance in dynamic loads. = Novel external fixation fracture method with circular locking mechanism compared with the application of dynamic axial external fixator on experimental tibial model ensures better stability in bending and favourable performance in dynamic loads. Injury, 44 (SUPPL.). S52-S55. ISSN 0020-1383. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 5.
Pavić, Arsen and Kodvanj, Janoš and Surjak, Martin (2013) Određivanje stabilnosti novog vanjskog fiksatora primjenom mjernog sustava Aramis. = Determining the stability of novel external fixator by using measuring system Aramis. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (6). pp. 995-999. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Pavičić, Marko (2013) Matematički model kogeneracijskog postrojenja s kombiniranim ciklusom. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Pavković, Danijel and Hoić, Matija and Deur, Joško and Petrić, Joško (2013) Energy storage systems sizing study for airborne wind energy applications. = Energy storage systems sizing study for airborne wind energy applications. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Pavković, Danijel and Hrgetić, Mario and Komljenović, Ante (2013) Control-oriented modeling and experimental identification of an ultracapacitor module. = Control-oriented modeling and experimental identification of an ultracapacitor module. In: 17th International Conference on Electrical Drives and Power Electronics, EDPE 2013, 02-04.2013., Dubrovnik, Hrvatska.
Pavković, Danijel and Hrgetić, Mario and Komljenović, Ante and Lisac, Anton and Deur, Joško (2013) Battery/ultracapacitor test setup control system design and verification. = Battery/ultracapacitor test setup control system design and verification. In: IEEE EuroCon 2013, 01-04.07.2013., Zagreb.
Pavković, Danijel and Komljenović, Ante and Hrgetić, Mario (2013) Control-oriented modeling and experimental identification of a VRLA battery. = Control-oriented modeling and experimental identification of a VRLA battery. In: 17th International Conference on Electrical Drives and Power Electronics, EDPE 2013, 02-04.2013, Dubrovnik, Hrvatska.
Pavković, Danijel and Kranjčević, Nenad and Kostelac, Milan (2013) Projektiranje sustava regulacije vertikalne sile tribometra s uzorkom na disku uključujući aktivno i pasivno prigušenje vertikalnih vibracija. = Design of normal force control system for a pin-on-disk tribometer including active and passive suppression of vertical vibrations. Automatika : časopis za automatiku, mjerenje, elektroniku, računarstvo i komunikacije, 54 (3). pp. 364-375. ISSN 0005-1144. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Pavković, Marko (2013) Dinamičko - mehanička analiza (DMA) višeslojnih polimernih folija te utjecaj vode na ponašanje materijala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.
Pavković, Neven and Štorga, Mario and Bojčetić, Nenad and Marjanović, Dorian (2013) Facilitating design communication through engineering information traceability. = Facilitating design communication through engineering information traceability. Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM, 27 (2). pp. 105-119. ISSN 0890-0604. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 4.
Pavlinec, Matija (2013) Utjecaj obrade površine zavarenih spojeva Cr - Ni čelika na korozijsku postojanost. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Pavlović, Matej (2013) Regulacija brzine vrtnje istosmjernog motora s nezavisnom uzbudom primjenom senzora pozicije niske razlučivosti. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Pavlović, Petar (2013) Procjena kvalitete rezultata mjerenja u laboratoriju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Pavunić, Miroslav (2013) Proračun cijene kalupa za injekcijsko prešanje polimera. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Pejazić, Josip (2013) Kaskadni rashladni sustav CO2/NH3 za duboko smrznute proizvode. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Perković, Luka and Ban, Marko and Krajačić, Goran and Duić, Neven (2013) Receding horizon model predictive control for smart management of microgrids under the day-ahead electricity market. = Receding horizon model predictive control for smart management of microgrids under the day-ahead electricity market. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Perković, Luka and Priesching, Peter and Duić, Neven (2013) Large eddy simulation of two significantly different turbulent premixed flames in the framework of SGS model based on coherent structures. = Large eddy simulation of two significantly different turbulent premixed flames in the framework of SGS model based on coherent structures. In: 6th European Combustion Meeting, 25.-28.06.2013., Lund, Švedska.
Perković, Luka and Silva, Pedro and Ban, Marko and Kranjčević, Nenad and Duić, Neven (2013) Harvesting high altitude wind energy for power production: The concept based on Magnus' effect. = Harvesting high altitude wind energy for power production: The concept based on Magnus' effect. Applied Energy, 101. pp. 151-160. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 5.
Perković, Marko (2013) Utjecaj uvjeta ispitivanja na udarni rad loma. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Peters, Christoph and Škec, Stanko and Leimeister, Jan Marco and Štorga, Mario (2013) Systems Engineering Meets Service Science - Extending the Scope for Holistic Design of Product-Service-Systems Using a Telemedicine Example. = Systems Engineering Meets Service Science - Extending the Scope for Holistic Design of Product-Service-Systems Using a Telemedicine Example. In: Tag des Systems Engineering, 06.-08.11.2013., Stuttgart, Njemačka.
Petković, Zvonimir (2013) Praktična realizacija definicije metra. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2013) Validation of Eulerian-Eulerian Approach for Diesel Sprays, and 3D Coupling with Lagrangian Spray Approach. = Validation of Eulerian-Eulerian Approach for Diesel Sprays, and 3D Coupling with Lagrangian Spray Approach. In: 25th European Conference on Liquid Atomization and Spray Systems, 01.-04.09.2013., Chania, Kreta.
Petranović, Zvonimir and Vujanović, Milan and Duić, Neven (2013) Modelling and simulation of pollutant formation in diesel engines. = Modelling and simulation of pollutant formation in diesel engines. In: SDEWES Conference, 21-28.09.2013, Dubrovnik, Hrvatska.
Petrić, Joško (2013) Modeling of hydro-pneumatic energy storage system. = Modeling of hydro-pneumatic energy storage system. In: 8th EUROSIM Congress on Modelling and Simulation, 10-12.09.2013., Cardiff, Velika Britanija.
Petrovčić, Matija (2013) Nerazorna ispitivanja komponenti podvozja zrakoplova. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Petrovčić, Tomislav (2013) Radna glava kranske kosilice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Petruschke, Philipp and Gašparović, Goran and Voll, Philip and Krajačić, Goran and Duić, Neven and Bardow, Andre (2013) RenewIslands meets optimization: Efficient synthesis of renewable energy systems. = RenewIslands meets optimization: Efficient synthesis of renewable energy systems. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, 2013-09-22-27, Dubrovnik.
Pešec, Bruno (2013) Kvaliteta izrade osovinskih sklopova tračničkih vozila. = Manufacturing quality of axle assemblies for railway vehicles. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Pfeifer, Antun (2013) Planiranje energetskog sustava s visokim udjelom obnovljivih izvora energije - slučaj Bosna i Hercegovina. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Picig, Tomislav (2013) Upravljanje elektroničkim paljenjem Ottovog motora. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Pikunić, Mislav (2013) Otpornost na erozijsko trošenje kompozitne keramike. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Pilipović, Ana and Stojanović, Ivan and Alar, Vesna (2013) Impact of ageing on mechanical properties of polyamide castings. = Impact of ageing on mechanical properties of polyamide castings. Polimeri: časopis za plastiku i gumu, 34 (4). pp. 88-96. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Piljek, Denis (2013) Mjereni rezultati rada dizalice topline povezane s tlom pri kontinuiranom radu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Piljić, Vedran (2013) Rashladni sustavi supermarketa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Pilski, Milo (2013) Analiza odnosa varijacija kutne brzine radilice i indiciranog momenta motora primjenom diskretne Fourierove transformacije. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Pintarić, Maristel (2013) Razvoj polimernog proizvoda - model željezničkog vagona. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Pinterić, Tomislav (2013) Duplex postupak modificiranja i prevlačenja čelika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Plavec, Stjepan (2013) Korozijska otpornost konstrukcijskih elemenata od nehrđajućih čelika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Plavotić, Marija (2013) Numeričko modeliranje rasta pukotine u epruveti sa zarezom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Pletikapić, Latica (2013) Samouslužni uređaj za praćenje promjena na ljudskoj koži. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Plut, Mihael (2013) Ispitivanje karakteristika strujanja zraka u klimatskom zračnom tunelu. = Experiments on flow and turbulence in the climatic wind tunnel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje.
Popek, Tomislav (2013) Trigeneracijsko postrojenje u stambenoj zgradi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Posavec, Marko (2013) Informacijska entropija pojednostavljenog avionskog. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Posilović, Martina (2013) Analiza gubitaka u proizvodnim i uslužnim poduzećima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Pospišil, Vedran (2013) Biomehanički model analize potkoljeničnih mišića u hodu. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Prahin, Karlo (2013) Upravljanje projektima zasnovano na Lean principima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Prlić, Krešimir (2013) Utjecaj dubokog hlađenja na trošenje čelika X155CrVMo12-1. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Protić, Antonio (2013) Analiza metričkih pokazatelja u postupku vrednovanja znanstvenog rada. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Protić, Antonio and Runje, Biserka and Stepanić, Josip (2013) Distribution of citations in one volume of a journal. = Distribution of citations in one volume of a journal. Interdisciplinary description of complex systems, 11 (2). pp. 227-237. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Protić, Tanja (2013) Održavanje na temelju analize vibracija. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Prpić, Karlo (2013) Konstrukcija i generički proračun poljoprivrednih prikolica. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Prskalo, Gordan and Degiuli, Nastia and Boras, Suzana and Širić, Franjo (2013) Tehnički priručnik. = Technical Manual. Weltplast d.o.o., Posušje, -.
Pugar, Daniel (2013) Mogućnosti spajanja metalnih pjena. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Puglia, Laura and Virag, Ana and Jokić, Andrej and Bemporad, Alberto (2013) A stochastic optimization approach to optimal bidding on dutch ancillary services markets. = A stochastic optimization approach to optimal bidding on dutch ancillary services markets. In: International Conference on the European Energy Market 2013, 27.-31.5.2013., Stockholm, Švedska.
Pukšec, Tomislav and Krajačić, Goran and Lulić, Zoran and Mathiesen, Brian Vad and Duić, Neven (2013) Forecasting long-term energy demand of Croatian transport sector. = Forecasting long-term energy demand of Croatian transport sector. Energy, 57. pp. 169-176. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 5.
Pukšec, Tomislav and Mathiesen, Brian Vad and Novosel, Tomislav and Duić, Neven (2013) Energy demand modelling and GHG emission reduction: case study Croatia. = Energy demand modelling and GHG emission reduction: case study Croatia. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013, Dubrovnik, Hrvatska.
Pukšec, Tomislav and Vad Mathiesen, Brian and Duić, Neven (2013) Potentials for energy savings and long term energy demand of Croatian households sector. = Potentials for energy savings and long term energy demand of Croatian households sector. Applied Energy, 101. pp. 15-25. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Puntarec, Jasminko (2013) Pomoćna pogonska grupa helikoptera. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Pupić, Igor (2013) Montaža klimatizacijskih uređaja u stambenim prostorima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Pustaić, Maja and Wolf, Hinko and Pustaić, Dragan (2013) Utjecaj vlastite težine kućišta statora hidrogeneratora na veličinu unutarnjih sila i pomaka. = Impact of Own Weight of Hidrogenerator Stator Housing on the Internal Forces and Displacements. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Radanović, Heni (2013) Pojavnost i značaj dušikovih vrsta u vodenom okolišu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.
Radman, Željko (2013) Nesigurnost rezultata ispitivanja udarnog rada loma na Charpy-evim batom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Radoš, Ivan (2013) Primjena polimernih materijala u medicini. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Radoš, Marija (2013) Mjerenje učinkovitosti procesa održavanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Rajaković, Zoran (2013) Korekcije i procjena mjerne nesigurnosti kod umjeravanja barometara. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Rajčić, Ante (2013) Centrifugalni ventilator za hlađenje električnog generatora. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.
Rakić, Hrvoje (2013) Tehnološka svojstva temeljnih radioničkih premaza. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Ranogajec, Vanja (2013) Poboljšanje kvalitete prijelaznih pojava u pogonskom sustavu hibridnog električnog vozila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.
Raos, Marko (2013) Postupak aluminiziranja nehrđajućih čelika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Raos, Pero and Stojšić, Josip and Šercer, Mladen and Pilipović, Ana and Somolanji, Marija (2013) Mechanical properties of polyamide 12 / clay nanocomposites. = Mechanical properties of polyamide 12 / clay nanocomposites. In: Proceedings of 5th International Scientific and Expert Conference of the International TEAM Society, Prešov, Slovačka.
Ratajec, Mihovil (2013) Vibracijski podrivač za voćnjake i vinograde. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Ratković, Igor (2013) Prepoznavanje objekata kamerom na eMIR mobilnom robotu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Rauch, Martina (2013) Energijska i entropijska analiza stacionarnog provođenja topline kroz ravnu stijenku s rubnim uvjetima 3. vrste. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.
Rauschenbergera, P. and Criscione, Antonio and Eisenschmidta, K. and Kinteab, D. and Jakirlić, Suad and Tuković, Željko and Roismanb, I.V. and Weiganda, B. and Tropea, Cameron (2013) Comparative assessment of Volume-of-Fluid and Level-Set methods by relevance to dendritic ice growth in supercooled water. = Comparative assessment of Volume-of-Fluid and Level-Set methods by relevance to dendritic ice growth in supercooled water. Computers & fluids, 79. pp. 44-52. ISSN 0045-7930. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2(2013). Točan broj autora: 9.
Razum, Stjepan (2013) Unapređenje procesa poduzeća korištenjem KAIZEN metodologije i 5S alata. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Račić, Mihael (2013) Klasifikacija materijala i skladišno materijalno poslovanje u poduzeću. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Rašić, Darko (2013) Analiza makro i mikrostrukture zavara čelika API 5L X80. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Rašković, Predrag and Guzović, Zvonimir and Cvetković, Svetislav (2013) Performance analysis of electricity generation by the medium temperature geothermal resources: Velika Ciglena case study. = Performance analysis of electricity generation by the medium temperature geothermal resources: Velika Ciglena case study. Energy, 54. pp. 11-31. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Rede, Vera and Ćorić, Danko and Radić, Jurica (2013) Mikrostrukturna analiza zavarenog spoja ni-cu legure. = The microstructural analyses of a ni-cu alloy weld. In: 7th international scientific-professional conference SBZ 2013 “Contemporary production processes, equipment and materials for welded constructions and products”, 23-25.10.2013., Slavonski Brod, Croatia.
Relota, Hrvoje (2013) Computer Aided Planning and Visualization of Robotic Neurosurgical Procedure. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.
Rešetar, Marko (2013) Upravljanje EGR ventilom motora s unutarnjim izgaranjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Režek, Robert (2013) Sistematizacija statističkih metoda upravljanja proizvodnjom po šest sigma metodologiji. = Systematization of statistical methods in production management used in Six sigma methodology. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Ribar, Domagoj and Jambrek, Filip and Pilipović, Ana (2013) Compression moulding of pneumatic tyre regenerate without binder. = Compression moulding of pneumatic tyre regenerate without binder. In: TEAM 2013 International Conference of Technique, Education, Agriculture & Management, 04-06.11.2013., Prešov, Slovačka.
Ribarić, Filip (2013) Dinamičko-mehanička analiza (DMA) višeslojnih polimernih folija te utjecaj UV zračenja na DMA spektar. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.
Ribičić, Matko (2013) Idejni projekt ispitivanja modela Kaplan turbine. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.
Ridjan, Iva and Mathiesen, Brian Vad and Connolly, David and Duić, Neven (2013) The feasibility of synthetic fuels in renewable energy systems. = The feasibility of synthetic fuels in renewable energy systems. Energy, 57. pp. 76-84. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 4.
Roksandić, Roko (2013) Procjena mjerne nesigurnosti kod mjerenja protoka oštrom prigušnicom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Ropuš, Ivana and Alar, Vesna and Runje, Biserka (2013) Adaptive Noise Reduction System. = Adaptive Noise Reduction System. Interdisciplinary description of complex systems, 11 (1). pp. 153-160. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Ropuš, Ivana and Runje, Biserka and Baršić, Gorana (2013) Dimensional nanometrology. = Dimensional nanometrology. In: International conference MATRIB 2013, 27-29.06.2013., Vela Luka, Hrvatska.
Rossi, Matija (2013) Paralelni algoritam za simultanu lokalizaciju i mapiranje za industrijskog mobilnog robota. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.
Rožić, Filip (2013) Strukturna analiza kućišta kolotura podiznog stupa na jaružaru. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.
Rožić, Mateja (2013) Analiza autobusnih linija javnog gradskog prijevoza Grada Zagreba. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Rudan, Domagoj (2013) Umjeravanje vertikalne komponente elektroničko - mehaničkog uređaja s ticalom. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mahović, Sanjin.
Rudan, Smiljko and Aščić, Blanka and Višić, Ivan (2013) Crashworthiness study of LPG ship with type C tanks. = Crashworthiness study of LPG ship with type C tanks. In: 6th International Conference on Collision and Grounding of Ships and Offshore Structures, ICCGS 2013, 17-19.06.2013., Trondheim; Norway.
Rujnić-Sokele, Maja and Barić, Gordana (2013) Polyethylene bags - from cradle to grave. = Polyethylene bags - from cradle to grave. In: 5th International Scientific Conference: Management of Technology – Step to Sustainable Production, Novi Vinodolski, Hrvatska.
Rukavina, Marko (2013) Usporedba eksperimentalno i numerički dobivenih faktora koncentracije naprezanja korodiranih epruveta. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Runje, Biserka (2013) Predavanja iz kolegija Mjeriteljstvo (skripta). = Lectures on the Metrology Course. FSB, Zagreb. (Unpublished)
Runje, Biserka and Marković, Marija and Stojanović, Ivan and Jakovljević, Suzana and Alar, Željko (2013) Coating distribution depending on surface microgeometry. = Coating distribution depending on surface microgeometry. Materialpruefung/Materials Testing, 56 (5). pp. 345-348. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 5.
Runje, Biserka and Marković, Marijan and Lisjak, Dragutin and Medić, Srđan and Kondić, Živko (2013) Integrirani postupak ispitivanja ravnosti tehničkih površina. = Integrated procedure for flatness measurements of technical surfaces. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (1). pp. 113-116. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 5.
Runko Luttenberger, Lidija and Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2013) Integrated power systems in small passenger ships. = Integrated power systems in small passenger ships. In: PlugBoat 2013, 10-11.10.2013., Nica, Francuska.
Rupert, Emil (2013) Vitko upravljanje projektima. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Sabalić, Srećko and Kodvanj, Janoš and Pavić, Andrej (2013) Comparative study of three models of extra-articular distal humerus fracture osteosynthesis using the finite element method on an osteoporotic computational model. = Comparative study of three models of extra-articular distal humerus fracture osteosynthesis using the finite element method on an osteoporotic computational model. Injury, 44 (SUPPL.). S56-S61. ISSN 0020-1383. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Sabol, Mate (2013) Unapređenje procesa poduzeća korištenjem kaizen metodologije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Sadaić, Goran (2013) Cjelovito praćenje provedbe unapređenja procesa rada. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Sakoman, Matija (2013) Praćenje stanja trošenja Diesel motora ferografskom analizom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Samaržija, Josip (2013) Analiza dinamičkog ponašanja elastične strukture prilikom kontakta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.
Sandhu, Maqsood Ahmad and Canen, Alberto Gabbay and Đukić, Goran (2013) Editorial. = Editorial. International Journal of Logistics Systems and Management, 15 (2-3). pp. 125-128. ISSN 1742-7967. Vrsta rada: Editorial. . Točan broj autora: 3.
Savić, Marko (2013) Optimiranje genetičkim algoritmom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Schneider, Daniel Rolph and Kirac, Mislav and Hublin, Andrea (2013) GHG reduction potential in waste management in Croatia. = GHG reduction potential in waste management in Croatia. Management of environmental quality, 24 (6). pp. 738-754. ISSN 1477-7835. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Schneider, Daniel Rolph and Ragossnig, Arne (2013) Biofuels from waste. = Biofuels from waste. Waste Management and Research, 31 (4). pp. 339-340. ISSN 0734-242X. Vrsta rada: Editorial. Kvartili JCR: Q3 (2013). Točan broj autora: 2.
Sedak-Benčić, Ivan (2013) Utjecaj pregrijavanja cijevi topničkog oružja na stanje materijala cijevi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakopčić, Mirko.
Sedić, Almir and Katulić, Stjepko and Pavković, Danijel (2013) Dynamics of a boiler with natural water circulation. = Dynamics of a boiler with natural water circulation. In: Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Sedmak, Daniel (2013) Komparativna analiza tokarenja i ortogonalnog okretnog glodanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škorić, Stephan.
Semenov, Oleg (2013) Konceptualno projektiranje transportnog helikoptera. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Semenski, Damir and Wolf, Hinko and Božić, Željko (2013) Advanced Methods of Structural Damage Analysis. = Advanced Methods of Structural Damage Analysis. In: Deformation and Fracture of Composites (DFC-12) & Structural Integrity and Multi-scale Modelling (SI-6), 07-11.04.2013., Cambridge.
Senjanović, Ivo and Hadžić, Neven and Bigot, Fabien (2013) Finite element formulation of different restoring stiffness issues in the ship hydroelastic analysis and their influence on response. = Finite element formulation of different restoring stiffness issues in the ship hydroelastic analysis and their influence on response. Ocean Engineering, 59. pp. 198-213. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Senjanović, Ivo and Hadžić, Neven and Vladimir, Nikola and Tomić, Marko (2013) Restoring stiffness formulations and their influence on ship hydroelastic response. = Restoring stiffness formulations and their influence on ship hydroelastic response. In: IMAM 2013, 14-17.10.2013., A Coruna, Španjolska.
Senjanović, Ivo and Tomić, Marko and Hadžić, Neven (2013) Formulation of consistent nonlinear restoring stiffness for dynamic analysis of tension leg platform and its influence on response. = Formulation of consistent nonlinear restoring stiffness for dynamic analysis of tension leg platform and its influence on response. Marine Structures, 30. pp. 1-32. ISSN 0951-8339. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Senjanović, Ivo and Tomić, Marko and Rudan, Smiljko (2013) Investigation of nonlinear restoring stiffness in dynamic analysis of tension leg platforms. = Investigation of nonlinear restoring stiffness in dynamic analysis of tension leg platforms. Engineering Structures, 56. pp. 117-125. ISSN 0141-0296. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Senjanović, Ivo and Tomić, Marko and Vladimir, Nikola and Cho, Dae Seung (2013) Analytical solution for free vibrations of a moderately thick rectangular plate. = Analytical solution for free vibrations of a moderately thick rectangular plate. Mathematical Problems in Engineering, 2013. ISSN 1024-123X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.
Senjanović, Ivo and Vladimir, Nikola (2013) Physical insight into Timoshenko beam theory and its modification with extension. = Physical insight into Timoshenko beam theory and its modification with extension. Structural Engineering and Mechanics, 48 (4). pp. 519-545. ISSN 1225-4568. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 2.
Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung (2013) Simplified formulations of mass and geometric stiffness matrices in vibration and stability analyses of thin-walled structures. = Simplified formulations of mass and geometric stiffness matrices in vibration and stability analyses of thin-walled structures. In: 4th International Conference on Marine Structures, MARSTRUCT 2013, 25-27.03.2013., Espoo; Finland.
Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung (2013) A shear locking-free beam finite element based on the modified Timoshenko beam theory. = A shear locking-free beam finite element based on the modified Timoshenko beam theory. Transactions of FAMENA, 37 (4). pp. 1-16. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko (2013) An advanced theory of moderately thick plate vibrations. = An advanced theory of moderately thick plate vibrations. Journal of Sound and Vibration, 332 (7). pp. 1868-1880. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Sirovica, Ivan (2013) Održavanje ležajeva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Skozrit, Ivica and Tonković, Zdenko and Bakić, Ante and Kodvanj, Janoš (2013) Numeričko i eksperimentalno modeliranje procesa deformiranja polietilena PE100. = Numerical and experimental modeling of deformation process of polyethylene PE100. In: 5. susret hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.
Skroče, Stipe (2013) Prepoznavanje e-MIR robota kamerom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Slamek, Antonio (2013) Lean inovacije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Slavica, Andrej (2013) Projekt vitla za mobilne transportne uređaje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
Smetko, Viktor (2013) Projektiranje estimatora varijabli stanja i parametara za baterije i ultrakondenzatore. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Smiljan, Antun (2013) Primjena polimera u poljoprivredi. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Smojver, Vladimir (2013) Utjecaj životnog vijeka proizvoda na okoliš. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Smoljan, Darko and Balen, Igor (2013) Experimental investigation of a turbulent jet from two opposed radial ceiling diffusers. = Experimental investigation of a turbulent jet from two opposed radial ceiling diffusers. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji, 11.04.2013, Zagreb, Hrvatska.
Smoljanić, Goran and Ljubas, Davor (2013) Dinamika stvaranja i taloženja kamenca u toplovodnom sustavu pri 55, 65 i 75 °C. = Dynamics of scale formation and deposition in hot water system at 55, 65 and 75 °C. In: 22. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji ; 11. Konferencija o termografiji, 11.04.2013., Zagreb, Republika Hrvatska.
Soldo, Vladimir and Ćurko, Tonko and Ćutić, Tomislav and Lučin, Davor (2013) Dizalice topline vs konvencionalni sustavi grijanja. = Heat Pumps vs Conventional Heating Systems. In: 3. Međunarodni kongres Dani inženjera strojarstva 2013, 23.-25.05.2013., Šibenik, Hrvatska.
Sremec, Mario (2013) Analiza cjelovitosti stupa vjetroagregata. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Stanić, Maja (2013) Određivanje efektivnog tlaka tlačne vage. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Stanković, Tino and Štorga, Mario and Shea, Kristina and Marjanović, Dorian (2013) Formal modelling of technical processes and technical process synthesis. = Formal modelling of technical processes and technical process synthesis. Journal of Engineering Design, 24 (3). pp. 211-238. ISSN 0954-4828. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.
Stančić, Mia (2013) Primjena vjetroturbina u urbanim sredinama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Starinec, Tomislav (2013) Modeliranja stabilnosti palete za kalem. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Staroveški, Tomislav (2013) Modeliranje trošenja medicinskog svrdla. = Wear modelling of medical drill. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Staroveški, Tomislav and Brezak, Danko and Udiljak, Toma (2013) LinuxCNC – Napredni sustav CNC upravljanja: primjena i kritički osvrt. = LinuxCNC – The enhanced machine controller: application and an overview. Tehnički vjesnik – Technical Gazette: Scientific professional Journal of technical faculties of the Josip Juraj Strossmayer University of Osijek., 20 (6). pp. 1103-1110. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 3.
Starčević, Dejan (2013) Sustav za donošenje odluka temeljen na ontologijama. = Ontology based decision-making system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Starčević, Martin (2013) Otpornost na eroziju brzoreznog čelika PM S390 MC. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Stepanić, Josip (2013) About defining the referent thermal scale points. = About defining the referent thermal scale points. Interdisciplinary description of complex systems, 11 (1). pp. 161-173. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.
Stepanić, Josip and Mester, Gyula and Kasać, Josip (2013) Synthetic inertial navigation systems: Case study of determining direction. = Synthetic inertial navigation systems: Case study of determining direction. In: 57. konferencija ETRAN-a, 3-6.06.2013., Zlatibor, Srbija.
Stepanić, Josip and Pejić Bach, Mirjana and Kasać, Josip (2013) Agent based model of young researchers in higher education institutions. = Agent based model of young researchers in higher education institutions. Interdisciplinary description of complex systems, 11 (2). pp. 209-216. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Stepić, Alen (2013) Trošenje svrdla za beton. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2013) Idea relevancy assessment in preparation of product development. = Idea relevancy assessment in preparation of product development. In: 19th International Conference on Engineering Design (ICED13), 19-22.08.2013., Seoul, Republika Korea.
Stipančić, Filip (2013) Primjena Leana u početnoj fazi životnog vijeka poduzeća. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Stipančić, Mladen (2013) Analiza proizvodnog procesa ambalaže praškastog proizvoda. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Stipančić, Tomislav (2013) Spoznajni model upravljanja grupom industrijskih robota. = Cognitive model for the control of a group of industrial robots. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Stojanović, Miroslav (2013) Analiza slobodnih vibracija kompozitne konstrukcije krila. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Stojić, Marin (2013) Analiza otkazivanja endoproteze zgloba koljena. = Analysis of the knee joint endoprosthesis failure. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Sudec, Ivica (2013) Stabilni nadzemni cilindrični spremnik za ukapljeni naftni plin (UNP). = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Sušec, Damir (2013) Primjena mikrokontrolera za nadzor i upravljanje pomoćnim sustavima automobila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Sušić, Aleksandar and Špehar, Mateja and Jurčević Lulić, Tanja (2013) Procedure for Correction of Lifting Task Posture for Injury Prevention. = Procedure for Correction of Lifting Task Posture for Injury Prevention. In: 5th International Conference ERGONOMICS 2013, 12-15. 06. 2013., Zadar, Croatia.
Sušić, Aleksandar and Žokalj, Martina and Kasović, Mario (2013) Estimation of Lumbar Spine Load During Lifting Task Execution. = Estimation of Lumbar Spine Load During Lifting Task Execution. In: 5th International Conference ERGONOMICS 2013, 12-15. 06. 2013., Zadar, Croatia.
Svilokos, Luka (2013) Optimiranje parametara kokilnog lijevanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Tadić, Josip (2013) Mjerenje debljine sloja uređajem CTG-200C. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Talevski, Karlo (2013) Primjena kompozitnih materijala u izradi vatrogasnih aparata. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Tarandek, Tomislav (2013) Izbor maziva za podmazivanje opreme u prehrambenoj industriji. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Tatalović, Vedran (2013) Konstrukcija hodajućeg robota pokretanog pneumatskim mišićima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Tepeš, Zvonimir (2013) Programska aplikacija za upravljanje parametarskim modelom boce. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Terze, Zdravko and Mueller, Andreas and Zlatar, Dario (2013) Störmer-Verlet integration scheme for multibody system dynamics in lie-group setting. = Störmer-Verlet integration scheme for multibody system dynamics in lie-group setting. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2013, 04-07.08.2013., Portland, OR; United States.
Terze, Zdravko and Müller, Andreas and Zlatar, Dario (2013) Angular momentum conserving integration scheme for multibody system dynamics in Lie-group setting. = Angular momentum conserving integration scheme for multibody system dynamics in Lie-group setting. In: ECCOMAS Thematic Conference on Multibody Dynamics 2013, 01-04.07.2013., Zagreb; Croatia.
Terze, Zdravko and Vrdoljak, Milan and Zlatar, Dario (2013) Dynamic simulation of helicopter airborne maneuvers with numerical integration scheme in Lie-group setting. = Dynamic simulation of helicopter airborne maneuvers with numerical integration scheme in Lie-group setting. In: ECCOMAS Thematic Conference on Multibody Dynamics 2013, 01-04.07.2013., Zagreb; Croatia.
Terze, Zdravko and Vrdoljak, Milan and Zlatar, Dario (2013) Numerical flight vehicle forward dynamics with state-space lie-group integration scheme. = Numerical flight vehicle forward dynamics with state-space lie-group integration scheme. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2013, 04-07.08.2013., Portland, OR; United States.
Terze, Zdravko and Zlatar, Dario (2013) Störmer - Verlet integracijska shema na rotacijskoj grupi SO(3). = Störmer - Verlet Integration Scheme on Rotation Group SO(3). In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Tokić, Marko (2013) Vibracije stupa vjetroagregata. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.
Tolić, Ana (2013) Pojava chunky grafita u odljevcima od nodularnog lijeva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Tomac, Ivan (2013) Rotacijski sjekač niskog raslinja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Tomaši, Dubravko and Đukić, Goran and Šafran, Mario (2013) Upravljanje zalihama u povratnoj logistici - Analiza postprodaje u autoindustriji u RH. = Inventory management in reverse logistics - analysis of Croatian automotive industry postsale practices. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (3). pp. 541-547. ISSN 1330-3651. Vrsta rada: Editorial. . Točan broj autora: 3.
Tomelić, Tonko (2013) Simulacija proizvodnog procesa u tvornici kabela. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Tomić, Anton (2013) Projektiranje robotskog manipulatora s hidrauličkim pogonom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Tomić, Denis (2013) Približna metoda proračuna otpora i trima glisera. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Tomić, Ivan (2013) Tehno-ekonomska analiza analiza visokotemperaturnog rasplinjavanja otpada plazmom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.
Tomić, Marko (2013) Utjecaj nelinearne povratne krutosti na odziv pritegnutih pučinskih konstrukcija. = Influence of nonlinear restoring stiffness on response of tethered floating structures. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Senjanović, Ivo.
Tomić, Tanja and Kralj, Slobodan and Kožuh, Zoran and Garašić, Ivica and Brumec, Gašpar (2013) Optimizacija parametara za MAG postupak zavarivanja čelika API 5L X80. = Zavarivanje i zavarene konstrukcije, 58 (3). pp. 101-113. ISSN 0354-7965. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Tomić, Tihomir (2013) Solarna elektrana s organskim Rankinovim ciklusom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Tomičević, Zvonimir and Hild, François and Kodvanj, Janoš and Roux, Stéphane (2013) Validation of elastic and identification of plastic parameters of Johnson-Cook law using DIC. = Validation of elastic and identification of plastic parameters of Johnson-Cook law using DIC. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25.–28. 09. 2013., Primošten, Hrvatska.
Tomičević, Zvonimir and Hild, François and Roux, Stéphane (2013) Mechanics-aided digital image correlation. = Mechanics-aided digital image correlation. Journal of strain analysis for engineering design, 48 (5). pp. 330-343. ISSN 0309-3247. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.
Tomičević, Zvonimir and Pamuković, Frane and Surjak, Martin and Kodvanj, Janoš (2013) Primjena regularizacije na korelaciju digitalne slike. = Primjena regularizacije na korelaciju digitalne slike. In: 5. susret hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.
Topić, Slavko (2013) Utjecaj obrade vode na indeks gustoće mutnoće. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.
Torbica, Radmila (2013) Logistička funkcija pakiranja. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Tošić, Marina and Ćosić, Predrag (2013) Development of a Decision Support System for Machine Selection. = Development of a Decision Support System for Machine Selection. In: 5th International Scientific Conference Management of Technology - Step top Sustainable Production MOTSP2013, 29.-31.05.2013., Novi Vinodolski, Hrvatska.
Trapić, Ivan (2013) Projekt mehaničke baterije za ispitnu električnu mrežu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kranjčević, Nenad.
Trinc, Ivan (2013) Analiza mjerne nesigurnosti kod određivanja položaja težišta vozila metodom vaganja i podizanja jedne od osovina. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Tudek, Domagoj (2013) Analiza kritičnog strukturnog detalja odobalne platforme. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.
Tuković, Željko and Ivanković, Alojz and Karač, Aleksandar (2013) Finite-volume stress analysis in multi-material linear elastic body. = Finite-volume stress analysis in multi-material linear elastic body. International Journal for Numerical Methods in Engineering, 93 (4). pp. 400-419. ISSN 0029-5981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Turk, Tomislav (2013) Upravljanje održavanjem proizvodnog sustava. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čala, Ivo.
Turnar, Robi (2013) Neuronska mreža u identifikaciji laboratorijskog modela regulacije nivoa tekućine. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.
Uroić, Tessa (2013) Parna turbina kogeneracijske termoelektrane na biomasu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Uzbašić, Ivan (2013) Projekt poluhermetskog kompresora za dizalicu topline. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrassy, Mladen.
Ušćumlić, Iskra (2013) Utjecaj dinamičke oplakane površine na otpor katamarana. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Užarević, Ivan (2013) Zaštitna svojstva epoksidne prevlake na aluminiju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Užarević, Vinko (2013) Modeliranje i regulacija temperature električki grijanog rotirajućeg diska eksperimentalnog postava tribometra. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Van Blarigan, Andrew and Kozarac, Darko and Seiser, Reinhard and Cattolica, Robert and Chen, Jyh-Yuan and Dibble, Robert W. (2013) Experimental study of methane fuel oxycombustion in a spark-ignited engine. = Experimental study of methane fuel oxycombustion in a spark-ignited engine. Journal of Energy Resources Technology, Transactions of the ASME, 136 (1). 012203-1-012203-9. ISSN 0195-0738. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 6.
Varbanov, Sabev Petar and Duić, Neven (2013) Editorial: Strategic supply, security and efficiency of energy systems using renewables, waste and pollution minimisation. = Editorial: Strategic supply, security and efficiency of energy systems using renewables, waste and pollution minimisation. Chemical Engineering Transactions, 34. pp. 1-6. ISSN 1974-9791. Vrsta rada: Editorial. . Točan broj autora: 2.
Vasilj, Andrej (2013) Određivanje aerodinamičkih sila pri gibanju automobila izloženog bočnom vjetru. = Determination of aerodynamic forces acting on a moving car in presence of crosswind. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Džijan, Ivo.
Vencl, Ivan (2013) Upravljanje brizgaljkom goriva MSUI. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Videc, Danijel (2013) Dekoriranje polimernih tvorevina načinjenih selektivnim laserskim srašćivanjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.
Videc, Danijel and Šercer, Mladen and Pilipović, Ana (2013) Colouring of polymer products manufacturing by selective laser sintering. = Colouring of polymer products manufacturing by selective laser sintering. In: 14th International Scientific Conference on Production Engineering, Biograd, Hrvatska.
Vindiš, Matija (2013) Određivanje optimalnih parametara homogenizacije Al2O3 suspenzija. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Vindiš, Vedran (2013) Numerički model ponašanja intraluminalnog tromba kod aneurizme abdominalne aorte pri dvoosnom opterećenju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.
Vindiš, Vedran and Virag, Lana and Karšaj, Igor (2013) Numerički model ponašanja intraluminalnog tromba kod aneurizme abdominale aorte pri dvoosnom opterećenju. = Numerical model of intraluminal thrombus at abdominal aortic aneurysm subjected to biaxial loading. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Virag, Ana and Jokić, Andrej and Bosch, P.P.J. van den and Hof, P.M.J. van den (2013) Using market schedules to improve secondary control design. = Using market schedules to improve secondary control design. In: International Conference on the European Energy Market 2013, 27.-31.5.2013., Stockholm, Švedska.
Virag, Lana and Wilson, John S. and Karšaj, Igor and Humphrey, Jay D. (2013) Međudjelovanje intraluminalnog tromba i aneurizmatične stijenke aorte. = Interaction between intraluminal thrombus and aneurysmatic aortic wall. In: 5. susret Hrvatskog društva za mehaniku, 06.-07.06.2013., Donja Stubica, Hrvatska.
Višić, Ivan (2013) Poboljšanje otpornosti broda na sudar primjenom sandwich konstrukcije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.
Vlahov, Marko (2013) Optimizacija parametara laserskog rezanja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Vojnović, Ida (2013) Izrada ojačala kompozita od lanenih vlakana. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Vorih, Martina (2013) Dinamička izdržljivost endoproteze zgloba kuka. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Vranek, Lovro (2013) Utjecaj brzine ohlađivanja na strukturu dentalnih legura. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Vranjić, Nikola (2013) Termodinamičko optimiranje miješanja različitih krugova pare u parnoturbinskom dijelu kombiniranog postrojenja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.
Vugec, Hrvoje (2013) Unapređenje procesa primjenom alata lean menadžmenta. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Vugrinčić, Amalija (2013) Utjecaj nitriranja na korozijsku postojanost čelika X17CrNi16-2. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Vujanović, Milan and Duić, Neven and Tatschl, Reinhard (2013) Modeling of nitrogen pollutants in combustion systems. = Modeling of nitrogen pollutants in combustion systems. In: 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur, Malaysia, 2013., 25 - 27.06.2013., Kuala Lumpur, Malezija.
Vuk, Marko (2013) Aditivni postupci prerade metalnih tvorevina, alata i kalupa. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Vuk, Tomislav (2013) Programska aplikacija za proračun zupčaničkog para. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Vuk, Valentino (2013) Primjer izbora funkcije sile rezanja kod tokarenja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Škorić, Stephan.
Vukelić, Josipa and Ćosić Lesičar, Jelena and Stepanić, Josip (2013) Ispitivanje osjetljivog barometarskog visinomjera. = Testing of sensitive barometric altimeter. Tehnički glasnik, 7 (1). pp. 1-7. ISSN 1864-6168. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Vuković, Danijel and Vrdoljak, Milan and Rašić, Josip (2013) O taktici gašenja i analizi stabilnosti helikoptera opremljenog vodenim topom. = Vatrogastvo i upravljanje požarima, 3 (1). pp. 4-15. ISSN 1848-347X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Vukres, Igor (2013) Određivanje dinamičkog momenta tromosti klipnog mehanizma motora s unutarnjim izgaranjem. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Vukušić, Ivana (2013) Materijali za izradu anatomskih uložaka stopala. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marić, Gojko.
Vukčević, Vuko (2013) Primjena računalne dinamike fluida u analizi gibanja plovnih objekata. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Vulinović, Antun (2013) Razvoj polimernog proizvoda - postolje za pločasto računalo. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Vučemil, Ante (2013) Primjena genetickog algoritma u proizvodnji. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Vučetić, Ante and Božić, Mladen and Ilinčić, Petar and Lulić, Zoran (2013) Acquisition and Analysis of the Vehicle Data via the EOBD Interface - Determination of Engine Characteristics. = Acquisition and Analysis of the Vehicle Data via the EOBD Interface - Determination of Engine Characteristics. In: XXIV International Automotive Conference “Science and Motor Vehicles 2013”, 23.-24.04.2013, Beograd, Srbija.
Vučković, Krešimir and Galić, Ivica and Čegec, Nikola (2013) Trajna dinamička čvrstoća korijena zuba zupčanika. = Spur gear tooth root fatigue strength. In: 5. susret Hrvatskog društva za mehaniku, 06-07.06.2013., Donja Stubica, Hrvatska.
Vušak, Viktor (2013) Automatizacija ulazne kontrole žitarica. = Automation of grain input control. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Wilson, John S. and Virag, Lana and Di Achille, Paolo and Karšaj, Igor and Humphrey, Jay D. (2013) Biochemomechanics of intraluminal thrombus in abdominal aortic aneurysms. = Biochemomechanics of intraluminal thrombus in abdominal aortic aneurysms. Journal of Biomechanical Engineering, 135 (2). ISSN 0148-0731. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 5.
Wolf, Hinko and Semenski, Damir and Korošić, Saša (2013) Estimation of overhead transmission line aeolian vibrations. = Estimation of overhead transmission line aeolian vibrations. In: 30th DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, 25-25. 09. 2013., Primošten, Croatia.
Zaimović, Gianluca (2013) Alarmni sustav za zaštitu osobnih stambenih objekata. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Zajec, Marko (2013) Traktorski priključak za košnju i vezanje snopova slame. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Zajec, Tomislav (2013) Tehnike mrežnog planiranja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Zhao, Guoying and Jacobs, William and Depraetere, Bruno and Alujević, Neven and Pinte, Gregory and Sas, Paul (2013) Modal analysis of a piezo based axisymmetric rotational vibration absorber. = Modal analysis of a piezo based axisymmetric rotational vibration absorber. In: 5th International Operational Modal Analysis Conference, IOMAC 2013, 13.-15. 05. 2013., Guimaraes, Portugal.
Zlopaša, Hinko (2013) Proračun strukturnih dimenzija pramčanog i krmenog dijela broda izloženim valnim udarnim opterećenjima prema pravilima klasifikacijskih društava. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Zovko, Vatroslav and Ćurković, Petar (2013) Singularity – A framework of corporate business in year 2050. = Singularity – A framework of corporate business in year 2050. In: 18th International Scientific Conference SM2013 Strategic Management and Decision Support Systems in Strategic Management, 18-19.04.2013., Subotica, Srbija.
Zrilić, Davorin (2013) Projektiranje konstrukcije glavnog rebra broda za prijevoz putnika, automobila i kamiona (RO-PAX). = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Zubak, Matija (2013) Lijevanje ploče od aluminijske legure. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Zubić, Alen (2013) Multiplikator za spajanje Dieselova motora Hatz s električnom kočnicom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Zvizdić, Davor and Grgec Bermanec, Lovorka (2013) HMI – Znanstveno i/ili temeljno mjeriteljstvo. = HMI - Scientific and/or Fundamental Metrology. Svijet po mjeri, 1. pp. 35-39. ISSN 1848-7114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Zvizdić, Davor and Šestan, Danijel (2013) Hysteresis of thin film IPRTs in the range 100 °c to 600 °c. = Hysteresis of thin film IPRTs in the range 100 °c to 600 °c. In: 9th International Temperature Symposium on Temperature: Its Measurement and Control in Science and Industry, ITS 2012, 19-23.03.2013., Los Angeles, CA; United States.
Zvizdić, Davor and Šestan, Danijel (2013) Tin-filled multi-entrance fixed point. = Tin-filled multi-entrance fixed point. In: 9th International Temperature Symposium on Temperature: Its Measurement and Control in Science and Industry, ITS 2012, 19-23.03.2013., Los Angeles, CA; United States.
Ćavar, Antonio (2013) Dilatometrijska analiza popuštanja brzoreznog čelika PM S390 MC. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Ćorak, Maro (2013) Vjerojatnosna kombinacija valnih opterećenja i podrhtavanja trupa broda. = Probabilistic combination of wave and whipping bending moments on ship structure. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.
Ćorak, Maro and Parunov, Joško and Guedes Soares, Carlos (2013) Long-term prediction of combined wave and whipping bending moments of containership. = Long-term prediction of combined wave and whipping bending moments of containership. In: 4th International Conference on Marine Structures, MARSTRUCT 2013, 25-27.03.2013., Espoo; Finland.
Ćorić, Danko and Rede, Vera and Magić, Marija (2013) Influence of aging temperature and time on the hardness of solution heat treated 7449 alloy. = Influence of aging temperature and time on the hardness of solution heat treated 7449 alloy. In: IFHTSE 2013 - 2nd MEDITERRANEAN CONFERENCE AND NEW CHALLENGES ON HEAT TREATMENT AND SURFACE ENGINEERING, 11-14.06.2013., Cavtat, Hrvatska.
Ćorluka, Marin (2013) Korozijska svojstva TIG i plazma zavara na aluminijskoj leguri. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Ćosić, Boris and Krajačić, Goran and Markovska, Nataša and Batas Bjelić, Ilija and Rajaković, Nikola and Duić, Neven (2013) 100% Renewable Energy Solutions for Regions: the Case of South East Europe. = 100% Renewable Energy Solutions for Regions: the Case of South East Europe. In: XXIX međunarodno savjetovanje ENERGETIKA 2013, 26-29.03.2013, Zlatibor, Srbija.
Ćosić, Boris and Markovska, Nataša and Taseska, Verica and Krajačić, Goran and Duić, Neven (2013) Increasing the renewable energy sources absorption capacity of the Macedonian energy system. = Increasing the renewable energy sources absorption capacity of the Macedonian energy system. Journal of Renewable and Sustainable Energy, 5 (4). 041805-1. ISSN 1941-7012. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 5.
Ćosić, Boris and Maršić, Tomislav and Krajačić, Goran and Markovska, Nataša and Batas Bjelić, Ilija and Hasović, Zihnija and Rajaković, Nikola and Duić, Neven (2013) The Effect of Regionally Integrated Energy Systems on CO2 Emissions Reduction and Wind Integration: the Case of South East Europe. = The Effect of Regionally Integrated Energy Systems on CO2 Emissions Reduction and Wind Integration: the Case of South East Europe. In: 6th International conference on sustainable Energy and Environmental Protection, 20-23.8.2013, Maribor, Slovenija.
Ćosić, Boris and Pfeifer, Antun and Duić, Neven (2013) Energy System Planning With a High Share of Renewable Energy Sources: the Case Study of Bosnia and Herzegovina. = Energy System Planning With a High Share of Renewable Energy Sources: the Case Study of Bosnia and Herzegovina. In: 11th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, 30.06-01.07.2013, Banja Luka, Bosna i Hercegovina.
Ćosić, Željko and Vladimir, Nikola and Ćatipović, Ivan (2013) Numeričko modeliranje mehaničkih naprezanja aparata visokonaponskih rasklopnih postrojenja uslijed djelovanja potresa. = Numerical modeling of mechanical stresses of high voltage apparatus under earthquake induced loads. In: 11.savjetovanje HRO CIGRE, 10-13.11.2013., Cavtat, Hrvatska.
Ćosić Lesičar, Jelena and Stepanić, Josip and Kasać, Josip (2013) Emergence of complex behaviour in swarms of mobile agents. = Emergence of complex behaviour in swarms of mobile agents. In: The 16th International Multiconference Information Society - IS 2013, 07-11.10.2013., Ljubljana, Slovenija.
Ćosić Lesičar, Jelena and Ćurković, Petar and Kasać, Josip and Stepanić, Josip (2013) Interpreting development of unmanned aerial vehicles using systems thinking. = Interpreting development of unmanned aerial vehicles using systems thinking. Interdisciplinary description of complex systems, 11 (1). pp. 143-152. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Ćurić, Pere (2013) Mapiranje uslužnih procesa poduzeća. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Ćurko, Daria (2013) Stabilnost osteosinteze pločicom na zaključavanje kod prijeloma proksimalnog humerusa. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Ćurković, Lidija and Majić Renjo, Marijana and Ciglar, Damir (2013) Effect of compaction pressure on the densification of cold isostatically pressed alumina ceramics. = Effect of compaction pressure on the densification of cold isostatically pressed alumina ceramics. In: 14th International Scientific Conference on Production Engineering, 19-22.06.2013., Biograd, Hrvatska.
Ćurković, Lidija and Otmačić Ćurković, Helena and Salopek, Sara and Majić Renjo, Marijana and Šegota, Suzana (2013) Enhancement of corrosion protection of AISI 304 stainless steel by nanostructured sol-gel TiO2 films. = Enhancement of corrosion protection of AISI 304 stainless steel by nanostructured sol-gel TiO2 films. Corrosion Science, 77. pp. 176-184. ISSN 0010-938X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 5.
Ćurković, Lidija and Salopek, Sara and Šegota, Suzana and Majić Renjo, Marijana and Tomić, Tanja (2013) AFM characterisation of sol-gel TiO2 films deposited on stainless steel. = AFM characterisation of sol-gel TiO2 films deposited on stainless steel. Materialwissenschaft und Werkstofftechnik, 44 (7). pp. 650-654. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 5.
Ćurković, Lidija and Vugrinčić, Amalija and Otmačić Ćurković, Helena and Bačić, Ivana and Šegota, Suzana and Levačić, Lidija (2013) Sol - gel TiO2 – ZrO2 films on stainless steel: preparation, characterization and corrosion properties. = Sol - gel TiO2 – ZrO2 films on stainless steel: preparation, characterization and corrosion properties. In: 2nd mediterranean conference &new challenges on heat treatment and surface engineering, Dubrovnik-Cavtat, Hrvatska.
Ćurković, Lidija and Vugrinčić, Amalija and Siketić, Zdravko and Bačić, Ivana and Levačić, Lidija (2013) Comparison of two depth profiling methods for analysis of sol - gel tio2 − zro2 films on stainless steel. = Comparison of two depth profiling methods for analysis of sol - gel tio2 − zro2 films on stainless steel. In: 2nd mediterian conference & new challenges on heat treatment and surface engineering, 11-14.06.2013., Dubrovnik-Cavtat, Hrvatska.
Ćurković, Petar and Jerbić, Bojan and Stipančić, Tomislav (2013) Co-evolutionary algorithm for motion planning of two industrial robots with overlapping workspaces regular paper. = Co-evolutionary algorithm for motion planning of two industrial robots with overlapping workspaces regular paper. International Journal of Advanced Robotic Systems, 10. pp. 1-11. ISSN 1729-8806. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Ćurković, Petar and Jerbić, Bojan and Stipančić, Tomislav (2013) Coordination of robots with overlapping workspaces based on motion co-evolution. = Coordination of robots with overlapping workspaces based on motion co-evolution. International Journal of Simulation Modelling, 12 (1). pp. 27-38. ISSN 1726-4529. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2013). Točan broj autora: 3.
Ćutić, Tomislav (2013) Razvoj i potvrda valjanosti simulacijskog modela za proračun godišnjeg faktora grijanja dizalice topline. = Development and validation of heat pump simulation model for seasonal performance factor calculation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ruschenburg, Joern and Soldo, Vladimir.
Ćužić, Ivan (2013) Reaktivna navigacija mobilnog robota primjenom metode potencijalnih polja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.
Čabraja, Anto (2013) Projektiranje i izrada nastavne makete za regulaciju pneumatskih sustava. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Čajko, Damir (2013) Optimiranje tehnoloških procesa metodama nelinearnog programiranja. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Čakmak, Damjan (2013) Dinamička analiza uređaja za određivanje mehaničke impedancije rastojnika-prigušivača. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.
Čanžar, Predrag and Tonković, Zdenko (2013) Ductile Cast Iron Microstructure and its Influence on Mechanical Properties. = Ductile Cast Iron Microstructure and its Influence on Mechanical Properties. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25-28.09.2013., Primošten, Hrvatska.
Čatić, Igor and Rujnić-Sokele, Maja and Žagar, Zdravko (2013) Uvod u sustavnosnu analizu tlačnog lijevanja metalnih taljevina. = Introduction to systemic analysis of die-casting of molten metals. Strojarstvo, 55 (3). pp. 181-187. ISSN 0562-1887. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . .
Čavužić, Matko (2013) Zaštita čeličnih konstrukcija vodorazrjedivim premazima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Čavužić, Zoran (2013) Zaštita metalnih konstrukcija organskim premazima. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Čegec, Nikola (2013) Ciklus naprezanja u korijenu zuba cilindričnog zupčanika. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.
Čituš, Romeo (2013) Izrada odljevka od sivog lijeva. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Čižmarević, Mario (2013) Primjena metode rubnih elemenata za proračun radijacije i difrakcije valova uslijed njihanja plutajućeg objekta. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Werner, Andreja.
Čolić, Luka (2013) TIG zavarivanje bakra. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Čondrić, Iva (2013) Svjetlom usmjereno komisioniranje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Čorak, Jelena (2013) Karakterizacija mikrostrukture Al2O3-t-ZrO2 kompozitne keramike oblikovane lijevanjem. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Čović, Andrija (2013) Naprava za pomoć pri istezanju stražnjih mišića bedra. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Čukelj, Fabijan and Kodvanj, Janoš and Surjak, Martin (2013) Biomechanical analysis of proximal humeral fixation using locking plates. = Biomechanical analysis of proximal humeral fixation using locking plates. In: 30th Danubia-Adria Symposium on Advances in Experimental Mechanics, 25. – 28. 09. 2013., Primošten, Hrvatska.
Čulig-Tokić, Dario (2013) Komparativna analiza centralnih toplinskih sustava u Hrvatskoj i Danskoj. = Comparative analysis of the district heating systems in Croatia and Denmark. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven and Vad Mathiesen, Brian.
Čveljo, Ivan (2013) Teretno vozilo s dizalicom za prijevoz vozila. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Đukić, Ankica (2013) Proizvodnja vodika elektrolizom vode pomoću sunčeve energije i fotonaponskog modula. = Hydrogen production via water electrolysis using solar energy and photovoltaic module. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Firak, Mihajlo.
Đukić, Ankica and Alar, Vesna and Firak, Mihajlo and Jakovljević, Suzana (2013) A significant improvement in material of foam. = A significant improvement in material of foam. Journal of Alloys and Compounds, 573. pp. 128-132. ISSN 0925-8388. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.
Đurinović, Ivan (2013) Sprava za izometričko vježbanje. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar and Pavković, Neven.
Đurković, Aleksandar (2013) Učinkovito korištenje sunčeve energije za proizvodnju električne energije. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.
Šabalja, Tomislav (2013) Predmontaža tanka tereta broda za prijevoz asfalta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubenkov, Boris.
Šagi, Goran (2013) Višekriterijsko optimiranje u konceptualnom razvoju cestovnih vozila. = Multi-objective optimization in conceptual phase of vehicle development. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Šagi, Goran and Lulić, Zoran (2013) Multi-objective optimization in the conceptual phase of vehicle development. = Multi-objective optimization in the conceptual phase of vehicle development. In: 19th ISPE International Conference on Concurrent Engineering, CE 2012, 03-07.09.2012., Trier; Germany.
Šagi, Goran and Lulić, Zoran and Stjepandić, Josip (2013) Multi-Objective Optimization of Low-Floor Minibus Suspension System Parameters. = Multi-Objective Optimization of Low-Floor Minibus Suspension System Parameters. In: 20th ISPE International Conference on Concurrent Engineering, 2-6.09.2013., Melbourne, Australija.
Šajfar, Ante (2013) Rasipač umjetnih gnojiva. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Šalamon, Mateja (2013) Eksperimentalno određivanje otpora serije brzih poludeplasmanskih katamarana. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Šalov, Igor (2013) Samopodizni uređaj na platformi za izradu istražnih i proizvodnih podmorskih bušotina. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir and Čorić, Većeslav.
Šare, Anamarija and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven (2013) The Impact of Electrification in the Transport Sector on the Power Curve, and the Integration of Renewable Energy Sources in to the Power Systems of the Dubrovnik Region. = The Impact of Electrification in the Transport Sector on the Power Curve, and the Integration of Renewable Energy Sources in to the Power Systems of the Dubrovnik Region. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Šarić, Ante (2013) Upravljački model za usklađeno kretanje dva industrijska robota. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Šarović, Kristina (2013) Analiza udara o tlo lakog kompozitnog aviona. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Šego, Neven (2013) Usporedba rezultata ispitivanja vrtložnim strujama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Šepčević, Ivan (2013) Medicinsko vozilo velikog kapaciteta. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Šercer, Igor (2013) Konstruiranje kalupa za injekcijsko prešanje kopče za uzgoj povrća. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Šercer, Mladen and Raos, Pero and Radić-Boršić, Ivana (2013) Development of Water Biodegradable PHA Films. = Development of Water Biodegradable PHA Films. In: 29th International Conference of the Polymer Processing Society, Nuremberg, Njemačka.
Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2013) Study on thermal properties of synthetic and bio - based polyurethane. = Study on thermal properties of synthetic and bio - based polyurethane. Thermal science, 00. p. 165. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Šikić, Bruno (2013) Postolje električne kočnice Zollner. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Šikić, Zvonimir (2013) A Note on Probability, Frequency and Countable Additivity. = A Note on Probability, Frequency and Countable Additivity. In: Filozofija u dijalogu sa znanostima, 5.-7.12.2012., Zagreb, Hrvatska.
Šikić, Zvonimir and Lauc, Davor (2013) Logika. = Logic. Školska knjiga, Zagreb, -. ISBN 953-6076-67-5
Šikić, Zvonimir and Ščekić, Zoran (2013) Matematika i muzika. = Mathematics and Music. Profil, Zagreb, -. ISBN 978-953-313-130-6
Šimić, Ivan (2013) Zagrijač zraka za sušare ložen biomasom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Šimonek, Filip (2013) Analiza površine aluminijske pjene nakon strojne obrade. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Šimunek, Marina and Režek Jambrak, Anet and Dobrović, Slaven and Herceg, Zoran and Vukušić, Tomislava (2013) Rheological properties of ultrasound treated apple, cranberry and blueberry juice and nectar. = Rheological properties of ultrasound treated apple, cranberry and blueberry juice and nectar. Journal of food science and technology, 51 (2). pp. 3577-3593. ISSN 0022-1155. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 5.
Šimunek, Marina and Režek Jambrak, Anet and Petrović, Marinko and Juretić, Hrvoje and Major, Nikola and Herceg, Zoran and Hruškar, Mirjana and Vukušić, Tomislava (2013) Aroma profile and sensory properties of ultrasound-treated apple juice and nectar. = Aroma profile and sensory properties of ultrasound-treated apple juice and nectar. Food Technology and Biotechnology, 51 (1). pp. 101-111. ISSN 1330-9862. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 8.
Šimunović, Vedran and Baršić, Gorana and Katić, Marko and Mudronja, Vedran (2013) Roundness - harmonic analysis and digital filtration. = Roundness - harmonic analysis and digital filtration. In: 14th International Scientific Conference on Production Engineering CIM 2013, 19-22.06.2013., Biograd, Hrvatska.
Šitum, Željko (2013) Control of a pneumatic drive using electronic pressure valves. = Control of a pneumatic drive using electronic pressure valves. Transactions of the Institute of Measurement and Control, 35 (8). pp. 1085-1093. ISSN 0142-3312. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2013). Točan broj autora: 1.
Šitum, Željko and Jalžabetić, Nikola (2013) Real-time control of fluid power systems using open source software. = Real-time control of fluid power systems using open source software. In: International Conference Fluid Power 2013, 19–20.09.2013 ., Maribor, Slovenija.
Šitum, Željko and Lobrović, Mihael (2013) PLC/PAC/PC - based control of an electro-hydraulic servo system. = PLC/PAC/PC - based control of an electro-hydraulic servo system. Ventil, 19 (1). pp. 34-40. ISSN 1318-7279. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Škec, Stanko and Stanković, Tino and Cash, Phil and Rohde, Danijel and Marjanović, Dorian (2013) Pragmatic risk assessment approach for product development. = Pragmatic risk assessment approach for product development. In: 9th International Workshop on Integrated Product Development IPD'12, 5-7.09.2012, Magdeburg, Njemačka.
Škec, Stanko and Štorga, Mario and Marjanović, Dorian (2013) Mapping Risks on Various Product Development Process Types. = Mapping Risks on Various Product Development Process Types. Transactions of FAMENA, 37 (3). pp. 1-16. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Škec, Stanko and Štorga, Mario and Marjanović, Dorian (2013) Mapping risk analysis methods on product development process. = Mapping risk analysis methods on product development process. In: 3rd International Conference on Integration of Design, Engineering and Management for Innovation, 4-6.9.2013., Porto, Portugal.
Škec, Stanko and Štorga, Mario and Marjanović, Dorian (2013) Network Science Overview. = Network Science Overview. EUREKA E8723 VISINEV project.
Škec, Stanko and Štorga, Mario and Marjanović, Dorian (2013) Visualisation of the Organisational Knowledge and Information Structures Evolution. = Visualisation of the Organisational Knowledge and Information Structures Evolution. EUREKA E8723 VISINEV project.
Škec, Tamara (2013) Projektiranje tlačnog sustava visokotemperaturnog generatora vlažnosti. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Škugor, Branimir and Deur, Joško (2013) Instantaneous optimization-based energy management control strategy for extended range electric vehicle. = Instantaneous optimization-based energy management control strategy for extended range electric vehicle. In: SAE 2013 World Congress & Exhibition, 16-18.04.2013., Detroit, MI, United States.
Škugor, Branimir and Deur, Joško (2013) The vehicle fleet data collection, processing, analysis and naturalistic driving cycles synthesis. = The vehicle fleet data collection, processing, analysis and naturalistic driving cycles synthesis. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 22-27.09.2013., Dubrovnik, Hrvatska.
Škurić, Vanja (2013) Revitalizacija industrijske parne turbine. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Šljivić, Robert (2013) Projektiranje postrojenja za proizvodnju drvenih peleta. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Šnajdar, Mateja and Schauperl, Zdravko (2013) ECAP – New consolidation method for production of aluminium matrix composites with ceramic reinforcement. = ECAP – New consolidation method for production of aluminium matrix composites with ceramic reinforcement. Processing and Application of Ceramics, 7 (2). pp. 63-68. ISSN 1820-6131. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Šolić, Sanja and Cajner, Franjo and Panjan, Peter (2013) Influence of deep cryogenic treatment of high speed steel substrate on TiAlN coating properties. = Influence of deep cryogenic treatment of high speed steel substrate on TiAlN coating properties. Materialwissenschaft und Werkstofftechnik, 44 (12). pp. 950-958. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). Točan broj autora: 3.
Šolić, Sanja and Schauperl, Zdravko and Godec, Matjaž (2013) Karakterizacija mikrostrukture duboko hlađenog nodularnog lijeva i ausferitnog nodularnog lijeva. = Microstructure characterization of deep cryogenic treated ductile cast iron and adi. In: 13th International Foundrymen Conference, Opatija, Hrvatska.
Šolić, Sanja and Schauperl, Zdravko and Karalić, Branko (2013) Utjecaj dubokog hlađenja na trošenje reznih pločica od tvrdog metala. = Influence of deep cryogenic treatment on tool life of carbide inserts. In: MATRIB 2013, materials, tribology, recycling, Vela Luka, Hrvatska.
Španić, Siniša (2013) Biblioteka podprograma za rad s eMIR mobilnim robotom. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Špehar, Mateja (2013) Izrada protokola za analizu biomehanike kralješnice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Špoljarić, Marko (2013) Utjecaj atmosferskih parametara na radne karakteristike mlaznog motora. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.
Štefančić, Sanja and Ćurković, Lidija and Baršić, Gorana and Majić Renjo, Marijana and Mehulić, Ketij (2013) Ispitivanje hrapavosti površine glazirane Y-TZP zubne keramike nakon izlaganja korozivnom mediju. = Investigation of glazed Y-TZP dental ceramics corrosion by surface roughness measurement. Acta Stomatologica Croatica, 47 (2). pp. 163-168. ISSN 0001-7019. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Števinović, Tihomir (2013) Zaštitna svojstva fenol epoksidnih prevlaka na čeliku u kiselim otopinama. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Štipak, Marko (2013) Izračuni mjerne nesigurnosti. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Štorga, Mario and Mostashari, Ali and Stanković, Tino (2013) Visualisation of the organisation knowledge structure evolution. = Visualisation of the organisation knowledge structure evolution. Journal of Knowledge Management, 17 (5). pp. 724-740. ISSN 1367-3270. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.
Štorga, Mario and Stanković, Tino and Cash, Philip (2013) Visually Augmented Analysis of Socio-Technical Networks in Engineering Systems Design Research. = Visually Augmented Analysis of Socio-Technical Networks in Engineering Systems Design Research. In: International workshop on The Future of Transdisciplinary Design (TFTD13), 24-25 .06. 2013., Luksemburg, Luksemburg.
Štorga, Mario and Stanković, Tino and Pavković, Neven and Bojčetić, Nenad (2013) Application Framework for Traceability of Engineering Information. = Application Framework for Traceability of Engineering Information. In: 19th International Conference on Engineering Design ICED 13, 19-22.08.2013., Seoul, Korea.
Šturlić, Nikola (2013) Procjena pouzdanosti sustava za nerazorno ispitivanje. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Šuler, Matija (2013) Mikrobiološka korozija čeličnih ukopanih konstrukcija. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Švigir, Dominik (2013) Radionička portalna dizalica. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
Žalac, Elizabeta (2013) Primjena CNC glodalice za digitalizaciju. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Žanić, Vedran (2013) Methods and concepts for the multi-criteria synthesis of ship structures. = Methods and concepts for the multi-criteria synthesis of ship structures. Ships and Offshore Structures, 8 (3-4). pp. 225-244. ISSN 1744-5302. Vrsta rada: Editorial. Kvartili JCR: Q2 (2013). Točan broj autora: 1.
Žanić, Vedran and Andrić, Jerolim and Prebeg, Pero (2013) Design synthesis of complex ship structures. = Design synthesis of complex ship structures. Ships and Offshore Structures, 8 (3-4). pp. 383-403. ISSN 1744-5302. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 3.
Žanić, Vedran and Pirić, Karlo and Kitarović, Stanislav (2013) Reliability and robustness based design attributes for multi-criteria decision making. = Reliability and robustness based design attributes for multi-criteria decision making. In: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013, 09-14.06.2013., Nantes; France.
Žanić, Vedran and Prebeg, Pero and Andrić, Jerolim (2013) Method for structural concept design of "open" ships. = Method for structural concept design of "open" ships. In: 12th International Symposium Practical Design of Ships and Other Floating Structures, PRADS 2013, 20-25.10.2013., Changwon, Korea.
Žarković, Duško (2013) Primjena senzora u održavanju. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Žganec, Viktor (2013) Analiza toka materijala u proizvodnom pogonu. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Žiha, Kalman (2013) Statistical variability vs. probabilistic uncertainty. = Statistical variability vs. probabilistic uncertainty. In: 35th International Conference on Information Technology Interfaces, ITI 2013, 24-27.06.2013., Cavtat / Dubrovnik; Croatia.
Žilić, Tihomir and Kasać, Josip and Šitum, Željko and Essert, Mario (2013) Simultaneous stabilization and trajectory tracking of underactuated mechanical systems with included actuators dynamics. = Simultaneous stabilization and trajectory tracking of underactuated mechanical systems with included actuators dynamics. Multibody System Dynamics, 29 (1). pp. 1-19. ISSN 1384-5640. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2013). Točan broj autora: 4.
Žinić, Dominik (2013) Regulacija brzine vrtnje hidrauličkog motora pomoću upravljačkog uređaja CompactRIO. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Žitković, Dario (2013) Strateški okvir za analizu lanaca opskrbe. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Živalj, Anđelo (2013) Projektiranje male elektrane koja koristi energiju valova. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Živić, Marija and Galović, Antun and Končić, Ružica (2013) Detailed analysis of the effect of the turbine and compressor isentropic efficiency on the thermal efficiency and the total entropy change of Brayton cycle. = Detailed analysis of the effect of the turbine and compressor isentropic efficiency on the thermal efficiency and the total entropy change of Brayton cycle. In: 8th Conference on sustainable development of energy, water and environment system, 22-27.09.2013., Dubrovnik, Hrvatska.
Živić, Marija and Galović, Antun and Virag, Zdravko (2013) Application of numerical and lumped capacitance method for cooling of bodies immersed in water. = Application of numerical and lumped capacitance method for cooling of bodies immersed in water. In: 5th International Scientific and Expert Conference of the International TEAM Society, 04.-06.11.2013, Prešov, Slovak Republic.
Živčić, Ivančica (2013) Usporedba postupaka plinskog nitriranja i nitrokarburiranja. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Žižmond, Marko (2013) Projekt brze interventne brodice s krutim dnom. = Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grubišić, Izvor.
Žokalj, Martina (2013) Izrada protokola za analizu opterećenja slabinske kralješnice. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Župan, Josip and Landek, Darko and Filetin, Tomislav (2013) Cooling characteristics of water based nanofluid with agitation. = Cooling characteristics of water based nanofluid with agitation. In: The 2nd mediterranean conference & new challenges on heat treatment and surface engineering, Dubrovnik- Cavtat, Hrvatska.
Župan, Josip and Landek, Darko and Filetin, Tomislav (2013) Investigation of the cooling process by nanofluids according to ISO 9950 and ASTM D 6482 standards. = Investigation of the cooling process by nanofluids according to ISO 9950 and ASTM D 6482 standards. Materiali in Tehnologije, 47 (1). pp. 125-127. ISSN 1580-2949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2013). .
Županić, Danijel (2013) Konsrukcijsko rješenje zatvorenog toka snage pužnog prijenosnika. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Županić, Doris (2013) Određivanje samozagrijavanja etalonskog platinskog otporničkog termometra. = Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Župetić, Renata (2013) Reološka svojstva i sterička stavilizacija aluminij oksidne keramike. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Žvorc, Vlado (2013) Udarna drobilica za kamen. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
