Items where Year is 2015

A

Ahac, Igor (2015) Optimiranje koagulacijske predobrade sirove vode bogate prirodnim organskim tvarima. = Optimization of coagulation pretreatment of raw water rich in natural organic matter. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje and Cajner, Hrvoje.

Ajduković, Ante (2015) Analiza proizvodnje u tvornici proizvoda za odvodnju i kanalizaciju. = Analysis of the production in the factory of products for drainage and sewage. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Aleksandrov Fabijanić, Tamara and Alar, Željko (2015) Nanostructured WC - Co hardmetal as reference material for high hardness range. = Nanostructured WC - Co hardmetal as reference material for high hardness range. In: EURO PM2015 congress&exhibition, Reims, Francuska.

Aleksandrov Fabijanić, Tamara and Katić, Marko and Alar, Željko and Menelao, Febo (2015) Comparison of Vickers hardness measurement in high hardness range. = Comparison of Vickers hardness measurement in high hardness range. In: XXI IMEKO World Congress “Measurement in Research and Industry”, 30.8.-4.9.2015., Prag, Češka.

Alfirević, Ivo and Žeželj, Dragan and Skozrit, Ivica (2015) Smooth Yield Surfaces of Isotropic Materials. = Smooth Yield Surfaces of Isotropic Materials. Transactions of FAMENA, 39 (3). pp. 1-8. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Alujević, Neven and Campillo-Davo, Nuria and Kindt, Peter and Desmet, Wim and Pluymers, Bert and Vercammen, Stijn (2015) A simplified tire model based on a rotating shell. = A simplified tire model based on a rotating shell. In: 4th International Tyre Colloquium, 21-22.04. 2015., Guildford, Velika Britanija.

Alujević, Neven and Wolf, Hinko and Depraetere, Bruno and Zhao, Guoying and Domazet, Željko and Pluymers, Bert and Desmet, Wim (2015) Self-tuneable velocity feedback for active isolation of random vibrations in subcritical two degree of freedom systems. = Self-tuneable velocity feedback for active isolation of random vibrations in subcritical two degree of freedom systems. Acta acustica united with acustica, 101 (5). pp. 950-963. ISSN 1610-1928. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 7.

Ana, Barišić (2015) Strukturna analiza broda za prijevoz automobila. = Structural analysis of car carrier ship. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Andreu, Javier Felipe and Schneider, Daniel Rolph and Krajačić, Goran (2015) Evaluation of integration of solar energy into the district heating system of the City of Velika Gorica. = Evaluation of integration of solar energy into the district heating system of the City of Velika Gorica. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Andrijević, Sandro (2015) Matematički model bloka 230 MW u TE Sisak. = Mathematical model of the 230 MW block in TE Sisak. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Andrić, Jerolim and Kitarović, Stanislav and Pirić, Karlo (2015) Residual hull girder ultimate strength of double hull oil tankers. = Residual hull girder ultimate strength of double hull oil tankers. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 66 (3). pp. 1-13. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Antabak, Anko and Barišić, Branimir and Andabak, Matej and Bradić, Lucija and Brajčinovic, Melita and Haramina, Tatjana and Halužan, Damir and Fuchs, Nino and Ćurković, Selena and Luetić, Tomislav and Šiško, Jerko and Prlić, Ivica (2015) Fizikalna svojstva sadrenih zavoja. = Physical properties of plaster bandages. Liječnički vjesnik, 137 (11/22). pp. 372-376. ISSN 0024-3477. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 12.

Antić, Domagoj (2015) Automatsko niveliranje hidrauličke platforme s dizalicom. = Automatic levelling of a hydraulic platform with crane. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Antonić, Ivana (2015) Analiza toka informacija u razvojnim timovima. = Analysis of the information flow in development teams. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Ančić, Ivica and Šestan, Ante (2015) Influence of the required EEDI reduction factor on the CO2 emission from bulk carriers. = Influence of the required EEDI reduction factor on the CO2 emission from bulk carriers. Energy policy, 84. pp. 107-116. ISSN 0301-4215. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 2.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2015) Influence of the required EEDI reduction factor application on general cargo ships GHG emissions. = Influence of the required EEDI reduction factor application on general cargo ships GHG emissions. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015, 21-24.09.2015., Pula, Hrvatska.

Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2015) Modification of the EEDI for Ro-Ro passenger ships. = Modification of the EEDI for Ro-Ro passenger ships. In: the World Maritime Technology Conference 2015 (SNAME Maritime Convention), 03-07.11.2015., Providence, Rhode Island, USA.

Aralica, Filip (2015) Analiza stabiliteta i opterećenja broda za prijevoz automobila i kamiona u oštećenom stanju. = Analysis of stability and loads of the car-truck carrier in damaged condition. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Slapničar, Vedran.

B

Babić, Nikola (2015) Analiza dinamičke karakteristike MAG CBT zavarivanja. = Analysis of dinamic characteristic in MAG CBT welding process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Babić, Sandra and Zrnčić, Mirta and Ljubas, Davor and Ćurković, Lidija and Škorić, Irena (2015) Photolytic and thin TiO2 film assisted photocatalytic degradation of sulfamethazine in aqueous solution. = Photolytic and thin TiO2 film assisted photocatalytic degradation of sulfamethazine in aqueous solution. Environmental science and pollution research, 22 (15). pp. 11372-11386. ISSN 0944-1344. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2(2015). Točan broj autora: 5.

Bago Jurič, Ivona and Plečko, Vanda and Anić, Ivica and Pleško, Sanja and Jakovljević, Suzana and Rocca, Jean Paul and Medioni, Etienne (2015) Antimicrobial efficacy of photodynamic therapy, Nd:YAG laser and QMiX solution against Enterococcus faecalis biofilm. = Antimicrobial efficacy of photodynamic therapy, Nd:YAG laser and QMiX solution against Enterococcus faecalis biofilm. Photodiagnosis and photodynamic tehrapy, 1. pp. 1-5. ISSN 7891-352X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.

Bajs, Marko (2015) Analiza nastanka toplih pukotina pri zavarivanju raznorodnih čelika. = Analysis of hot cracking appearance during welding of dissimilar steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Balaton, Antun (2015) Ispitivanje utjecaja prevlačenja PACVD postupkom na promjenu povšinske hrapavosti i topografije površine. = Examination of influence of the PACVD process on surface roughness and surface topography. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Baleta, Jakov and Mikulčić, Hrvoje and Vujanović, Milan (2015) Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. = Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Baleta, Jakov and Vujanović, Milan and Duić, Neven and Pachler, Klaus and Schellander, David (2015) Improvement of the numerical framework for selective catalytic reduction applications. = Improvement of the numerical framework for selective catalytic reduction applications. In: 7th European Combustion Meeting (ECM 2015), 30.03.-02.04.2015., Budimpešta, Mađarska.

Baleta, Jakov and Vujanović, Milan and Pachler, Klaus and Duić, Neven (2015) Numerical modeling of urea water based selective catalytic reduction for mitigation of NOx from transport sector. = Numerical modeling of urea water based selective catalytic reduction for mitigation of NOx from transport sector. Journal of Cleaner Production, 88. pp. 280-288. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.

Balić, Dražen and Lončar, Dražen (2015) Impact of Fluctuating Electricity Prices on Operation Strategy of Trigeneration System. = Impact of Fluctuating Electricity Prices on Operation Strategy of Trigeneration System. Journal of Sustainable Development of Energy, Water and Environment Systems, 3 (3). pp. 315-332. ISSN 1848-9257. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Balić, Dražen and Maljković, Danica and Lončar, Dražen (2015) District heating system as a dynamical energy storage – opportunities and limitations. = District heating system as a dynamical energy storage – opportunities and limitations. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09-2.10. 2015., Dubrovnik, Croatia.

Banjeglav, Nikola (2015) Ventilacija prostorije za metalizaciju. = Ventilation line for metallization room. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ruševljan, Miroslav.

Barać, Vjencislav (2015) Stablizirani laseri u mjeriteljstvu duljine. = Stabilized lasers for lenght measurement. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Barbarić, Marina and Lončar, Dražen (2015) Strategies for micro-grid operation in grid-connected mode. = Strategies for micro-grid operation in grid-connected mode. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Barić, Edi-Eduard (2015) Zavarljivost martenzitnog čelika X3CrNiMo13-4. = Weldability of X3CrNiMo13-4 martensitic steel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Barić, Toni (2015) Sinteza mehanizma za okidanje podvodne puške. = Speargun trigger mechanism synthesis. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Barišić, Ante (2015) Određivanje balističkih značajki zavarenog spoja čelika Armox 500T. = Determination of ballistic characteristics on Armox 500T steel welded joint. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Barišić, Sandro (2015) Konstrukcija oslonca cjevovoda. = Design of pipe support. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Barkaoui, Alae-Eddine and Boldyryev, Stanislav and Duić, Neven and Krajačić, Goran and Guzović, Zvonimir (2015) Appropriate Integration of Geothermal Energy Sources by Pinch Approach: Case Study of Croatia. = Appropriate Integration of Geothermal Energy Sources by Pinch Approach: Case Study of Croatia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.-02.10.2015, Dubrovnik, Croatia.

Barković, Denis (2015) Automatsko razvrstavanje otpada. = Automatic segregation of waste. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Barta, Marija (2015) Razgradnja prirodnih organskih tvari u vodi UV/H2O2 postupkom. = Degradation of natural organic matter in water by UV/H2O2 process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.

Barta, Monika (2015) Određivanje centra rotacije zuba kod ortodontske terapije. = Determination of the centre of rotation of tooth during orthodontic treatment. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Bartolec, Bruno (2015) Optimizacija razvoda procesne pare. = Process steam distribution optimisation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Bartolin, Ivan (2015) Utjecaj trošenja alata i parametara obrade na raslojavanje pri bušenju kompozitnih materijala. = Influence of tool wear and cutting parameters on delamination at drilling of composite materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Barunica, Mario (2015) Analiza utjecaja parametara injekcijskog prešanja na mehanička svojstva linije spajanja. = Analysis of influence of injection moulding parameters on welded line mechanical properties. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Baršić, Gorana (2015) Etaloni hrapavosti Nacionalnoga laboratorija za duljinu RH u području dimenzijskoga mikromjeriteljstva i nanomjeriteljstva. = Croatian national laboratory roughness standards in the field of dimensional micro- and nanometrology. Svijet po mjeri, 4. pp. 41-46. ISSN 1848-7114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Baršić, Gorana and Mudronja, Vedran (2015) Iskustva u akreditaciji Hrvatskog nacionalnog laboratorija za duljinu. = In: 15. Hrvatska konferencija o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.

Baršić, Gorana and Mudronja, Vedran and Katić, Marko and Šimunović, Vedran (2015) Use of statistical tolerances. = Use of statistical tolerances. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015., Vodice, Croatia.

Baršić, Gorana and Runje, Biserka and Šimunović, Vedran (2015) Etalon za nanomjeriteljstvo s višestrukim vrijednostima koraka i brazda. = Nano-calibration standard with multiple pitch and step height values. Tehnički vjesnik – Technical Gazette: Scientific professional Journal of technical faculties of the Josip Juraj Strossmayer University of Osijek., 22 (4). pp. 935-938. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Basa, Blaženko - Bruno (2015) Primjena CAD/CAM sustava u konstrukciji i obradi kućišta motora. = Application of CAD/CAM system in design and machining of motor casing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Batan, Matija (2015) Uređaj za čišćenje snijega na pogon traktorom. = Tractor driven snow cleaning device. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Batas Bjelić, Ilija and Rajaković, Nikola and Ćosić, Boris and Duić, Neven (2015) A realistic EU vision of a lignite-based energy system in transition: case study of Serbia. = A realistic EU vision of a lignite-based energy system in transition: case study of Serbia. Thermal science, 19 (2). pp. 371-382. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 4.

Batković, Tomislav (2015) Vibracijski konvejer. = Vibratory conveyor. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Bačeković, Ivan (2015) Energetski sustavi sa visokim stupnjem penetracije centralnog grijanja i hlađenja u Hrvatskoj - primjer energetskog planiranja Karlovačke županije. = Energy systems with a high penetration of district heating and cooling in Croatia - an example of energy planning for the Karlovac county. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Begedin, Tomislav (2015) Automatizirani skladišni sustavi s regalnim vozilima. = Automated shuttle based storage and retrieval systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Begić, Tomislav (2015) Analiza uvjeta u vrelovodnom kotlu kod prelaska s loženja na tekuće gorivo na izgaranje plinovitog goriva. = Analysis of conditions in hot water boiler when switching from liquid fuel firing to combustion of gaseous fuel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.

Bego, Josip (2015) Vaga za mjerenje aerodinamičkog opterećenja. = Wind tunnel balance. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Belić, Damir (2015) Analiza sustava za proizvodnju distributivnih i specijalnih transformatora. = Analysis of the system for production of distribution and special transformers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Belić, Damir and Kunica, Zoran (2015) A concept of smart wheelchair. = A concept of smart wheelchair. Annals of Faculty of Engineering Hunedoara – International Journal Of Engineering, 13 (1). pp. 37-40. ISSN 1584-2665. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Beljak, Adrijan (2015) Produljenje trajnosti kalupa za injekcijsko prešanje polimernih materijala postupcima prevlačenja. = Extending the durability of molds for injection molding of polymeric materials by the coating processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Benić, Juraj (2015) Izvlačenje strukovnog nazivlja iz strojarskih tekstova. = Extracting the professional terminology from engineering texts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Benković, Renata (2015) Analiza porinuća primjerom zakretnog saonika. = Analysis of tipping table launching method. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Berković-Šubić, Mihaela and Boras, Ivanka and Frančeski, Joško and Kodvanj, Janoš and Rodić, Alan and Švaić, Srećko and Tonković, Zdenko (2015) Application of IR Thermography for Determination of Material Properties. = Application of IR Thermography for Determination of Material Properties. In: QIRT-Asia 2015 Conference on Quantitative InfraRed Thermography, 6.-10.07.2015., Mahabalipuram, Indija.

Berković-Šubić, Mihaela and Boras, Ivanka and Tonković, Zdenko and Kodvanj, Janoš and Švaić, Srećko and Rodić, Alan and Surjak, Martin and Plačko, Gordan and Frančeski, Joško (2015) Primjena infracrvene termografije kod mehaničkog ispitivanja materijala. = In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.

Bernat, Marija (2015) Protetski nadomjesci za pse. = Prosthetic replacement for dogs. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Bešlić, Josip (2015) Stroj za punjenje vina u boce. = Wine filling machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Beštak, Franjo (2015) Održavanje rotacijske opreme primjenom termografije. = Maintenance of rotating equipment using thermography. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Bilan, Marko (2015) Mjerenje temperature u plinovima. = Measurement of temperature in gasses. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Bilandžija, Josip (2015) Pregled i razvoj dodatnih materijala za MAG zavarivanje. = Review and development of filler materials for MAG welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Bister, Ivan (2015) Poboljšavanje proizvodnih procesa. = Improving of production processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Blažinić, Igor (2015) 300 kW ORC kogeneracija na drvnu sječku. = 300 kW ORC congeneration fired by wood chips. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Boban, Luka and Lepoša, Leon and Soldo, Vladimir and Grozdek, Marino (2015) Influence of Groundwater Flow on Implementation of Distributed Thermal Response Test. = Influence of Groundwater Flow on Implementation of Distributed Thermal Response Test. In: 24th IIR International Congress of Refrigeration (ICR2015), 16-22.08.2015., Yokohoma.

Bogdanić, Dino (2015) Ispitivanje otpornosti na abrazijsko trošenje tvrdih prevlaka proizvedenih PACVD postupkom. = Abrasion wear testing of hard coatings produced by PACVD process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Bogdanović, Drago (2015) Stroj za dobavu segmentiranih svrdla u postupku bušenja rudarskog okna. = Machine for feeding segmented drills in the drilling processfor mine shaft. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Bojan, Vidović (2015) Dimenzioniranje novog krila postojećeg lakog zrakoplova. = Sizing of new wing for existing light aircraft. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Bojčetić, Nenad and Salopek, Damir and Marjanović, Dorian (2015) PLM implementation: case study. = PLM implementation: case study. In: 20th International Conference on Engineering Design (ICED 2015), 07.2015, Milano, Italija.

Bolarić, Antonio (2015) Dizalica topline voda–voda za grijanje i hlađenje obiteljske kuće. = Water-to-water heat pump for heating and cooling of residential building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Boldyryev, Stanislav and Krajačić, Goran (2015) Energy efficiency and carbon footprint reduction for Croatian regions by Total Site integration. = Energy efficiency and carbon footprint reduction for Croatian regions by Total Site integration. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Boldyryev, Stanislav and Krajačić, Goran (2015) Targeting of Trade-Off for Total Site Heat Recovery. = Targeting of Trade-Off for Total Site Heat Recovery. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09-2.10.2015, Dubrovnik, Croatia.

Boldyryev, Stanislav and Krajačić, Goran and Duić, Neven and Novosel, Tomislav (2015) Contributing global CO2 mitigation by utilisation of food industry heat into smart Croatian DHS via Total Site heat recovery. = Contributing global CO2 mitigation by utilisation of food industry heat into smart Croatian DHS via Total Site heat recovery. In: International Conference on Smart Energy Systems and 4th Generation District Heating, 25-26.08.2015, Copenhagen, Denmark.

Boldyryev, Stanislav and Krajačić, Goran and Duić, Neven and Varbanov, Petar (2015) Cost Minimisation for Total Site Heat Recovery. = Cost Minimisation for Total Site Heat Recovery. Chemical Engineering Transactions, 45. pp. 157-162. ISSN 2283-9216. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Boldyryev, Stanislav and Mikulčić, Hrvoje and Mohorović, Zoran and Vujanović, Milan and Krajačić, Goran (2015) Heat Recovery and CHP Approach for Site of Cement Plant. = Heat Recovery and CHP Approach for Site of Cement Plant. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Boldyryev, Stanislav and Ćosić, Boris and Krajačić, Goran and Dominković, Dominic and Štefanec, Kristjan and Duić, Neven (2015) Pollution reduction in Croatian food industry via Total Site heat recovery. = Pollution reduction in Croatian food industry via Total Site heat recovery. In: 4th International Conference on Sustainability Science and Engineering, 26-29.05.2015, Balatonfured, Hungary.

Boršić, Saša (2015) Utjecaj debljine prevlake na mehanička svojstva polimerne tvorevine. = Influence of coating thickness on the mechanical properties of polymer product. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Bosak, Matija (2015) Traktorski priključak za međuredno kopanje. = Agricultural vehicle extension for in-between rows cultivating. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Botica, Marko (2015) Digitalizacija energetskih instalacija sjeverne zgrade fakulteta strojarstva i brodogradnje. = Digitalization of north building energy installation of faculty of mechanical engineering. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Boutanious, Ziad and Jasak, Hrvoje (2015) Viscous Treatment of the Snow Phase in Eulerian-Eulerian Simulations of Drifting Snow. = Viscous Treatment of the Snow Phase in Eulerian-Eulerian Simulations of Drifting Snow. In: 14th International Conference on Wind Engineering, 21.-26.6.2015., Porto Allegre, Brazil.

Bošnjaković, Alen and Runje, Biserka and Bašić, Hazim and Softić, Almira (2015) The characteristics of quality management system in inspection bodies in accordance with the International Standard ISO/IEC 17020:2012. = The characteristics of quality management system in inspection bodies in accordance with the International Standard ISO/IEC 17020:2012. In: Quality 2015, 10-13.07.2015., Neum, Bosna i Hercegovina.

Božan, Domagoj (2015) Projektiranje mjernog sustava za umjeravanje visinomjera. = Design of measuring system for calibration of altimeters. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Božić, Mladen and Vučetić, Ante and Ilinčić, Petar and Kozarac, Darko and Lulić, Zoran (2015) Research Testbed for HCCI Engine. = Research Testbed for HCCI Engine. In: The 25th JUMV International Automotive Conference “Science and Motor Vehicles 2015″, 14-15.04.2015, Beograd, Srbija.

Braun, Teo (2015) Izrada web aplikacije za analizu rezultata usporedbenih mjerenja etalona duljine. = Web application for analysis of length standards measurement results obtained by differential method. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Brezak, Danko and Staroveški, Tomislav and Stiperski, Ivan and Klaić, Miho and Majetić, Dubravko (2015) Artificial neural network model for tool condition monitoring in stone drilling. = Artificial neural network model for tool condition monitoring in stone drilling. Applied Mechanics and Materials, 772. pp. 268-273. ISSN 1660-9336. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Brčić, Ante (2015) Traktorska prikolica za gašenje požara. = Tractor firefighting trailer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Budim, Robert (2015) Nehrđajući čelici u farmaceutskoj industriji. = Stainless steels in the pharmaceutical industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Budimir, Marko (2015) Primjena alata kontrole kvalitete u praćenju procesa proizvodnje nareznog prstena. = Application of quality control tools in monitoring cutting ring production process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Bulat, Petar (2015) Sustav za umjeravanje mjerila relativne vlažnosti. = System for calibration of relative humidity meters. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Bušić, Dino (2015) Prikaz i analiza skladišnog sustava poduzeća Monting d.o.o. = Review and analysis of warehouse system of Monting d.o.o. company. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Bušić, Matija (2015) Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom. = Friction stir welding of aluminium foam sandwich panels. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran and Klobčar, Damjan.

Bužančić Primorac, Branka and Parunov, Joško (2015) Probabilistic Models of Ultimate Strength Reduction of Damaged Ship. = Probabilistic Models of Ultimate Strength Reduction of Damaged Ship. Transactions of FAMENA, 39 (2). pp. 55-74. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 2.

Bužančić Primorac, Branka and Parunov, Joško (2015) Statistics of still water bending moment of damaged ship. = Statistics of still water bending moment of damaged ship. In: 5th International Conference on Marine Structures, Southampton, Engleska.

Bužančić Primorac, Branka and Parunov, Joško (2015) Structural reliability assessment of accidentally damaged oil tanker. = Structural reliability assessment of accidentally damaged oil tanker. In: 16th International Congress of the International Maritime Association of the Mediterranean, 21-24.09.2015., Pula, Hrvatska.

Bužančić Primorac, Branka and Slapničar, Vedran and Munić, Ivan and Grubišić, Vjekoslav and Ćorak, Maro and Parunov, Joško (2015) Statistics of still water bending moment of damaged Suezmax oil tanker. = Statistics of still water bending moment of damaged Suezmax oil tanker. In: 18th International Conference on Ships and Shipping Research, 24-26.06.2015., Lecco, Italija.

Bužančić Primorac, Branka and Ćorak, Maro and Parunov, Joško (2015) Statistics of still water bending moment of damaged ship. = Statistics of still water bending moment of damaged ship. In: 5th International Conference on Marine Structures, 25-27.03.2015, Southampton, Engleska.

C

Cajner, Franjo and Kovačić, Saša and Rafael, Hrvoje and Vugrinčić, Amalija and Šimunović, Vinko and Gržeta, Biserka (2015) Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. = Influence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel. Materialwissenschaft und Werkstofftechnik, 46 (1). pp. 69-77. ISSN 0933-5137. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

Cajner, Franjo and Landek, Darko and Kovačić, Saša (2015) Introduction and application of new tehnologies of plasma nitriding and PACVD coating. = Introduction and application of new tehnologies of plasma nitriding and PACVD coating. In: 5th International Conference „Mechanical Technologies and Structural Materials“, 24-25.9.2015, Split, Hrvatska.

Cajner, Franjo and Landek, Darko and Rafael, Hrvoje and Jačan, Jurica and Bogdanić, Dino (2015) Wear resistance of TiN / TiCN and TiN / Ti - B - N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. = Wear resistance of TiN / TiCN and TiN / Ti - B - N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel. In: The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20-22.05.2015., Venecija, Italija.

Cajner, Hrvoje and Kovačec, Miroslav and Štefanić, Nedeljko (2015) Potencijal korištenja alata LEAN menadžmenta u hrvatskim tvrtkama. = The potential of using lean management tools in Croatian companies. In: Lean Spring Summit 2015, 21.-23.05.2015., Šibenik, Hrvatska.

Cajner, Hrvoje and Đukić, Goran and Kovačec, Miroslav and Štefanić, Nedeljko (2015) The analysis of lean management indicators in Croatian companies. = The analysis of lean management indicators in Croatian companies. In: MOTSP 2015, 10.-12.06.2015., Brela, Hrvatska.

Capan, Tomislav (2015) Unaprijeđenje procesa gospodarenja otpadom. = Improvement of waste management. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Caprace, J.D. and Andrić, Jerolim and Mishra, B. and Pires, F. and Roland, F. and Schipperen, I. and Li, L. and Osawa, N. and Lindstrom, P. and Doig, R and Remes, H. and Kim, M.H. (2015) Commite V.3 materials and fabrication technology. = Commite V.3 materials and fabrication technology. In: Proceedings of the 19th international ship and offshore structures congress. CRC PRESS / BALKEMA - PROCEEDINGS AND MONOGRAPHS IN ENGINEERING, WATER AND EARTH SCIENCES, TAYLOR and FRANCIS GROUP, LONDON, UK, Cascais, Portugal, pp. 619-668. ISBN 978-1-138-02895-1

Cash, Phillip and Štorga, Mario (2015) Multifaceted assessment of ideation: using networks to link ideation and design activity. = Multifaceted assessment of ideation: using networks to link ideation and design activity. Journal of engineering design, 26 (10-12). pp. 391-415. ISSN 0954-4828. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Ceraj, Luka (2015) Unaprijedna neuronska mreža s jednim i dva sakrivena sloja u predikciji ponašanja kaotičnog dinamičkog sustava. = Feedforward neural network with one and two hidden layers in prediction of chaotic dynamic system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Vladimir, Nikola and Choi, Tae Muk (2015) Application of the assumed mode method to the vibration analysis of rectangular plate structures in contact with fluid. = Application of the assumed mode method to the vibration analysis of rectangular plate structures in contact with fluid. In: 7th International Conference on Hydroelasticity in Marine Technology, 16-19.09.2015., Split, Hrvatska.

Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Vladimir, Nikola and Choi, Tae Muk (2015) Forced vibration analysis of arbitrarily constrained rectangular plates and stiffened panels using the assumed mode method. = Forced vibration analysis of arbitrarily constrained rectangular plates and stiffened panels using the assumed mode method. Thin-walled structures, 90. pp. 182-190. ISSN 0263-8231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Vladimir, Nikola and Choi, Tae Muk (2015) Frequency response of rectangular plate structures in contact with fluid subjected to harmonic point excitation force. = Frequency response of rectangular plate structures in contact with fluid subjected to harmonic point excitation force. Thin-walled structures, 95. pp. 276-286. ISSN 0263-8231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Cho, Dae Seung and Kim, Byung Hee and Vladimir, Nikola and Choi, Tae Muk (2015) Natural vibration analysis of rectangular bottom plate structures in contact with fluid. = Natural vibration analysis of rectangular bottom plate structures in contact with fluid. Ocean engineering, 103. pp. 171-179. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2015) Natural vibration analysis of stiffened panels with arbitrary edge constraints using the assumed mode method. = Natural vibration analysis of stiffened panels with arbitrary edge constraints using the assumed mode method. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 229 (4). pp. 340-349. ISSN 1475-0902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 3.

Cho, Dae Seung and Vladimir, Nikola and Choi, Tae Muk (2015) Simplified procedure for the free vibration analysis of rectangular plate structures with holes and stiffeners. = Simplified procedure for the free vibration analysis of rectangular plate structures with holes and stiffeners. Polish Maritime Research, 22 (2(86)). pp. 71-78. ISSN 1233-2585. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 3.

Ciković, Zoran (2015) Razvoj upravljačkog algoritma za planiranje kretanja mobilnog robota. = Development of path-planning algorithm of a mobile robot. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Cipek, Mihael (2015) Modeliranje, analiza i optimalno upravljanje pogonima hibridnih električnih vozila. = Modeling, analysis, and optimal control of hybrid electric vehicle powertrains. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Contento, Giorgio and Lupieri, Guido and Jasak, Hrvoje and Vukčević, Vuko (2015) Numerical Study of Unsteady Breaking Waves Induced by a Submerged Hydrofoil at Steady Forward Speed. = Numerical Study of Unsteady Breaking Waves Induced by a Submerged Hydrofoil at Steady Forward Speed. In: NAV 2015 18th International Conference on Ships and Shipping Research, 24-26.6.2015., Lecco, Italija.

Crneković, Martin (2015) Mogućnosti primjene koncepcije Interneta objekata u održavanju. = Application possibilities of Internet of Things in maintenance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Crneković, Mladen and Pavlic, Tomislav and Lukas, Marin (2015) Programming language for the eMIR mobile robot. = Programming language for the eMIR mobile robot. In: 15th International Scientific Conference on Production Engineering, 10-13.06.2015., Vodice, Hrvatska.

Crnko, Martina (2015) Analiza utjecaja jediničnog pakovanja na logističke procese. = Analysis of the impact of unit packages on the logistics processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Cukrov, Alen (2015) Automatski generator mreže kontrolnih volumena za diskretizaciju sintetičke mikrostrukture. = An automatic finite volume mesh generator for synthetic microstructure discretization. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Cukrov, Alen and Tuković, Željko and Galović, Antun (2015) Towards a Moving Mesh Numerical Simulation of a Heated Solid Immersion into Liquid. = Towards a Moving Mesh Numerical Simulation of a Heated Solid Immersion into Liquid. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Curman, Dominik (2015) Mobilna platforma za skidanje ingota s kamiona. = Mobile platform for downloading ingots from truck. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Cvijetić, Gregor (2015) Analiza i implementacija metode harmoničke ravnoteže u proračunskoj mehanici fluida. = Analysis and implementation of the Harmonic Balance Method in computational fluid dynamics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.

D

Dabro, Ante (2015) Simulacija obrade u CAD/CAM sustavu. = Simulation of machining in CAD/CAM system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Daničić, Domagoj (2015) Analiza čvrstoće različitih topoloških koncepata broda za kružna putovanja. = Structural analysis of different topology concepts of cruise ships. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Debelec, Antonio (2015) Numerička simulacija procesa zavarivanja. = Numerical Simulation of Welding Process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.

Dedić, Vedran (2015) Projekt etalonskog sustava za usporedbeno umjeravanje mjerila vakuuma. = Design of standard system for comparison calibration of vacuum gauges. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Dervišević, Dražen (2015) Razvoj rotacijske sonde za ispitivanje cijevi metodom vrtložnih struja. = Development of the eddy current rotary probe for tube testing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Deur, Joško and Škugor, Branimir and Cipek, Mihael (2015) Integracija električnih vozila u energetske i transportne sustave. = Integration of electric vehicles into energy and transport systems. Automatika : časopis za automatiku, mjerenje, elektroniku, računarstvo i komunikacije, 56 (4). pp. 395-410. ISSN 0005-1144. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Dobravec, Viktorija (2015) Razdjelnici topline. = Heat cost allocators. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Dobrilović, Domagoj (2015) Napredni postupci injekcijskog prešanja u automobilskoj industriji. = Advanced injection moulding procedures in automotive industry. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Dobrović, Slaven and Zebić Avdičević, Maja and Roksandić, Roko (2015) Provjera radnih karakteristika ultrafiltracijske membrane pri obradi kišnice različite kvalitete. = Performance evaluation of the ultrafiltration membrane with rainwater of different quality. In: 6. Hrvatska konferencija o vodama s međunarodnim sudjelovanjem - Hrvatske vode na investicijskom valu, 20-23. 05. 2015., Opatija, Hrvatska.

Dogančić, Bruno (2015) Računalna dinamika deformabilnih tijela. = Computational dynamics of deformable bodies. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.

Dominković, Dominik Franjo (2015) Uloga dizalica topline velikih snaga u budućim energetskim sustavima. = The role of large scale heat pumps in future energy systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vad Mathiesen, Brian and Krajačić, Goran.

Dominković, Dominik Franjo and Bačeković, Ivan and Ćosić, Boris and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven and Markovska, Nataša (2015) Low Carbon Energy Supply for South East Europe. = Low Carbon Energy Supply for South East Europe. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Dominković, Dominik Franjo and Ćosić, Boris and Bačelić Medić, Zlatko and Duić, Neven (2015) A hybrid optimization model of biomass trigeneration system combined with pit thermal energy storage. = A hybrid optimization model of biomass trigeneration system combined with pit thermal energy storage. Energy conversion and management, 104. pp. 90-99. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.

Dominković, Franjo (2015) Fizikalno - kemijska svojstva poliamidnog premaza. = Physical and chemical properties of polyamide coating. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Dorocić, Damjan (2015) Konceptualni projekt solarne bespilotne letjelice beskonačnog trajanja leta. = Conceptual Design of the Solar Unmanned Vehicle with Unlimited Endurance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.

Drašković, Hrvoje (2015) Procjena okolišnog utjecaja životnog vijeka energetskog transformatora. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Drobac, Đuro and Sović, Ivica and Šariri, Kristina and Šestan, Danijel and Zvizdić, Davor (2015) Laboratory measurement of energy dissipation of the seismic soliton wave at fracture. = Laboratory measurement of energy dissipation of the seismic soliton wave at fracture. In: XXI IMEKO World Congress, 30. 8. - 4. 9. 2015., Prag, Češka.

Duboković, Marin (2015) Analiza ponašanja konstrukcije od drva metodom konačnih elemenata. = Finite element method analysis of a wooden structure. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana and Rudan, Smiljko.

Dubreta, Nikša and Miloš, Damir (2015) The Structure of Motivation for Mechanical Engineering Study at University of Zagreb. = The Structure of Motivation for Mechanical Engineering Study at University of Zagreb. In: 7th International Scientific and Expert Conference of the International TEAM Society, 15.-16.10.2015., Beograd, Republika Srbija.

Dugorepec, Andrija (2015) Primjena referentnih materijala za određivanje točnosti pokazivanja instrumentiranog Charpy-evog bata. = The use of reference materials to determine indication accuracy of instrumented Charpy pendulum. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.

Duić, Neven (2015) Is the success of clean energy guaranteed? = Is the success of clean energy guaranteed? Clean Technologies and Environmental Policy, 17 (8). pp. 2093-2100. ISSN 1618-954X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 1.

Duić, Neven (2015) Journal of Sustainable Development of Energy, Water and Environment Systems – Volume III. = Journal of Sustainable Development of Energy, Water and Environment Systems – Volume III. Journal of Sustainable Development of Energy, Water and Environment Systems, 3 (4). p. 436. ISSN 1848-9257. Vrsta rada: Editorial. . Točan broj autora: 1.

Duić, Neven and Urbaniec, Krysztof and Huisingh, Donald (2015) Components and structures of the pillars of sustainability. = Components and structures of the pillars of sustainability. Journal of Cleaner Production, 88. pp. 1-12. ISSN 0959-6526. Vrsta rada: Editorial. Kvartili JCR: Q1 (2015). Točan broj autora: 2.

de Arujo, Manuel Silvino Batalha and Fernandes, Celio and Ferras, Luis Lima and Tuković, Željko and Jasak, Hrvoje and Nobrega, Joao Miguel (2015) Implementation of integral viscoelastic constitutive models in OpenFOAM® computational library. = Implementation of integral viscoelastic constitutive models in OpenFOAM® computational library. In: Novel Trends in Rheology VI, 28-29.7.2015., Zlin, Ceska.

E

Eterović, Ozren (2015) Analiza tragova trošenja kod endoproteza kuka. = Analysis of wear at endoprosthesis of hip. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Ešegović, Dominik (2015) Analiza čvrstoće glavnog nosača vjetroagregata. = Stress analysis of wind turbine mainframe. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

F

Fajković, Denis (2015) Membranska naprezanja crvenih krvnih stanica. = Membrane stresses of red blood cells. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Farkas, Andrea (2015) Primjena metode planiranja pokusa kod višekriterijskog projektiranja brodske konstrukcije s analizom projekta putem programa klasifikacijskog društva. = Application of design of experiments to multicriteria decision making in ship structural design with analysis performed via classification society software. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Prebeg, Pero.

Ferlin, Simon (2015) Proračun elastičnog modula za ispitivanje cjevovoda. = Stress analysis of elastic module for pipeline inspection. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.

Filipović, Eugen (2015) Kondenzator rashladnog agregata hlađen optočnom vodom. = Chiller with water coolled condenser. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Firak, Mihajlo and Đukić, Ankica (2015) Hydrogen transportation fuel in Croatia: Road map strategy. = Hydrogen transportation fuel in Croatia: Road map strategy. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Franjčić, Antonio (2015) Analiza ravnotežnog leta zrakoplova primjenom generičkog globalnog aerodinamičkog modela. = Analysis of equilibrium aircraft flight using the Generic Global Aerodynamic Model. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Franz, Viktor (2015) Planiranje i kontrola otpreme gotovih proizvoda. = Planning and control of finished goods' shipping process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Fumić, Ivan (2015) Suvremeni rezni alati za obradu provrta. = Modern cutting tools for making holes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

G

Gabelica, Dominik (2015) Preša za grožđe. = Wine press. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Gajović, Andreja and Plodinec, Milivoj and Macan, Jelena and Haramina, Tatjana and Iveković, Damir and Willinger, Marc (2015) Modified titanate nanotubes for application as nanofillers in polymers. = Modified titanate nanotubes for application as nanofillers in polymers. In: 12th Multinational Congress on Microscopy, 23–28.08.2015., Eger, Mađarska.

Gajšek, Brigita and Đukić, Goran and Opetuk, Tihomir (2015) Review of Ergonomic solutions to Protect From Injuries of Lower Back in Case of Forklifts Drivers. = Review of Ergonomic solutions to Protect From Injuries of Lower Back in Case of Forklifts Drivers. In: Management of Technology – Step to Sustainable, 10.-12.06.2015., Brela, Hrvatska.

Galić, Helena (2015) Određivanje j faktora kod globalnih vertikalnih vibracija brodskog trupa. = Determination of j factor for global vertical hull-girder vibration. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.

Galić, Iva (2015) Kemijska analiza i metalografsko ispitivanje martenzitnih nehrđajućih čelika. = Chemical analysis and nictallographic examination of martensitic stainless steel welded joint. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Galović, Jurica (2015) Sustavi automatski vođenih vozila. = Automatic guided vehicle systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Garašić, Ivica and Kožuh, Zoran and Jurica, Maja and Tomić, Tanja and Čolić, Luka and Babić, Nikola (2015) Optimizacija sastava aktivacijskog premaza za A – TIG navarivanje. = Optimization of the A – TIG bead on plate welding flux composition. In: 8. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SB 2015. “ SUVREMENI PROIZVODNI POSTUPCI , OPREMA I MATERIJALI ZA ZAVARENE KONSTRUKCIJE I PROIZVODE”, Slavonski Brod, Hrvatska.

Garašić, Ivica and Kožuh, Zoran and Remenar, Maja (2015) Sensors and their classification in the fusion welding technology. = Sensors and their classification in the fusion welding technology. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (4). pp. 1069-1074. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Gatin, Inno (2015) Implementaacija i validacija spektralne valne metode viših redova za numeričke simulacije nelinearnih površinskih valova. = Implementation and validation of the higher order wave spectrum method (HOS) for simulation of surface waves. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćatipović, Ivan and Jasak, Hrvoje.

Gatin, Inno and Jasak, Hrvoje and Vukčević, Vuko (2015) Validation and Verification of Steady Resistance KCS Simulations with Sinkage and Trim using Embedded Free Surface Method. = Validation and Verification of Steady Resistance KCS Simulations with Sinkage and Trim using Embedded Free Surface Method. In: Tokyo 2015 A Workshop on CFD in Ship Hydrodynamics, 2.-4.12.2015., Tokyo, Japan.

Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2015) CFD Validation of a Container Ship in Calm Water and Head Seas. = CFD Validation of a Container Ship in Calm Water and Head Seas. In: 18th Numerical Towing Tank Symposium, 28.09.-30.09.2015., Cortona, Italija.

Gašparec, Jurica (2015) Stroj za transport klipova kukuruza. = Machine for transporting corn cobs. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Gašparović, Goran and Kilkis, Siir and Krajačić, Goran (2015) Sustainability Comparison of Campus and Community Microgrids through SDEWES Index and H2RES. = Sustainability Comparison of Campus and Community Microgrids through SDEWES Index and H2RES. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, Dubrovnik 2015, 27.09.-02.10.2015., Hrvatska.

Gašparović, Goran and Prebeg, Pero and Krajačić, Goran (2015) Application of Multi-objective Optimization to a Long-term Design of Croatian National Energy System. = Application of Multi-objective Optimization to a Long-term Design of Croatian National Energy System. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, Dubrovnik 2015, 27.09.-02.10.2015., Hrvatska.

Geček, Marko (2015) Graz ciklus - postrojenje s nultim emisijama. = Graz cycle - a zero emission power plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.

Gjuretek, Dominik (2015) Greške kod MAG zavarivanja. = Defects in MAG welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Glavica, Matej (2015) Rashladne vitrine za hlađenje pića i povrća. = Display cases fir cooling beverages and vegetables. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Gledić, Ivana and Parunov, Joško (2015) Application of weight function method in the assessment of crack propagation through stiffened panel. = Application of weight function method in the assessment of crack propagation through stiffened panel. In: International Congress of the International Maritime Association of the Mediterranean "Towards Green Marine Technology and Transport" (16 ; 2015), 21.-24.09.2015., Pula, Hrvatska.

Godec, Damir and Radoš, Ivan and Šercer, Mladen (2015) Performance comparison of low - budget 3D printers. = Performance comparison of low - budget 3D printers. In: Regional Conference Polymer Processing Society Graz 2015, PPS2015, Graz, Austrija.

Godec, Damir and Vidović, Ivan and Šercer, Mladen (2015) Optimiranje parametara niskobudžetnog 3D tiskanja. = Parameters optimization of low - cost 3D printing. Tehničke znanosti : glasnik Akademije tehničkih znanosti Hrvatske, 19 (1). pp. 3-8. ISSN 1330-7207. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Godec, Damir and Šercer, Mladen (2015) Aditivna proizvodnja. = Additive manufacturing. Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-26-6

Gomboc, Josip (2015) Regulacija razine radne tvari u ORC postrojenju. = ORC plant working fluid level control. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Gotvald, Dražen (2015) Zelena logistika u naftovodnom sustav. = Green logistics in oil pipeline system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Govedić, Klemen (2015) Regulacija hidrauličkog servosustava pomoću ugradbenog uređaja NI myRIO. = Control of a hydraulic system using the embedded device NI mvRIO. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Grdić, Alen (2015) Moderni trokoordinatni mjerni sustavi. = Modern coordinate measurement systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Grgec Bermanec, Lovorka and Zvizdić, Davor (2015) Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories. = Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories. International Journal of Metaology and Quality Engineering, 6 (3). 307-p1. ISSN 2107-6839. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Grgec Bermanec, Lovorka and Ćalušić, Luka (2015) Interlaboratory Comparison of Pressure Gauges Calibration in the range from 0 to 140 MPa for Croatian Accredited Laboratories. = Interlaboratory Comparison of Pressure Gauges Calibration in the range from 0 to 140 MPa for Croatian Accredited Laboratories. In: Laboratory Competence 2015, 21-24.10.2015., Zadar, Hrvatska.

Grgić, Bruno (2015) Praćenje kontura pomoću robota. = Robotic contour following. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Grgić, Ivan (2015) Troškovno optimalna analiza energetske učinkovitosti stambene zgrade. = Cost-optimal analysis of residential building energy efficiency. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Grgić, Mate (2015) Lokalno opterećenje i odziv strukture broda uslijed udaranja o valove. = Local load and response of a ship structure due to slamming. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žanić, Vedran and Malenica, Šime.

Grgurač, Ivan (2015) Digitalizacija energetskih instalacija južne zgrade Fakulteta strojarstva i brodogradnje. = Digitalization of south building energy installations of Faculty of Mechanical Engineering. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Grgurić, Ivan (2015) Turbopumpa vodovodnog sustava. = Turbopump for water supply system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir and Tuković, Željko.

Grilec, Hrvoje (2015) Ergonomske značajke viličara. = Ergonomic characteristics of forklifts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Grilec, Krešimir and Jakovljević, Suzana and Novosel, Dean (2015) Analiza trošenja valjaka za mjerenje sile. = Wear analysis of roller brake tester. In: International Conference MATRIB 2015, Vela Luka, Hrvatska.

Grilec, Krešimir and Ćurković, Lidija and Majić Renjo, Marijana and Jakovljević, Suzana and Sakoman, Matija and Sladojević, Milan (2015) SEM - EDS Analysis of Composite Al2O3 - ZrO2 Ceramics Eroded with SiC Particles. = SEM - EDS Analysis of Composite Al2O3 - ZrO2 Ceramics Eroded with SiC Particles. Applied Mechanics and Materials, 729. pp. 27-31. ISSN 1662-7482. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

Grlić, Danijel (2015) Produljenje trajnosti kalupa za tlačni lijev postupcima prevlačenja. = Extending of durability of molds for die-casting by the coating processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Gruičić, Kristian (2015) Ukrcajna rampa za invalidska kolica prilagođena kompaktnim višenamjenskim putničkim vozilima. = Wheelchair ramp for compact multi-purpose vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Gršeta, Ivan (2015) Mogućnost ostvarenja statusa povlaštenog proizvođača električne energije iz kogeneracije za TE-TO Zagreb. = The possibility of achieving the status of eligible producers of electricity from cogeneration for TE-TO Zagreb. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Gujić, Ante (2015) Svrha proizvodnje i korištenja drvenog ugljena. = The purpose of the production and use of charcoal. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

H

Hadžić, Neven and Tomić, Marko and Vladimir, Nikola and Ostojić, Siniša and Senjanović, Ivo (2015) Current state and perspectives of the Croatian Shipbuilding industry. = Current state and perspectives of the Croatian Shipbuilding industry. Journal od Naval Architecture and Marine Engineering, 12. pp. 33-42. ISSN 1813-8535. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Hajdarović, Perica (2015) Konstrukcija invalidskih kolica za samostalno savladavanje neravnih i strmih terena. = Wheelchair design for independently overcoming rough and steep terrains. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Hajdu, Ivan (2015) Primjena aktivacijskog premaza pri plazma zavarivanju austenitnih čelika. = Aplication of activation flux in plasam welding of austenitic steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Hammer, Vedran (2015) Procesni pristup tehnologiji 3D printanja. = Process aproach to 3D printing technology. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Hasan, Khandaker Rasel and Rahaman, Md. Mashiur and Degiuli, Nastia (2015) Determination of the Transit Fee for Mongla-Ghasiakhali Canal: Savings from the Daily Running Cost of Ships. = Determination of the Transit Fee for Mongla-Ghasiakhali Canal: Savings from the Daily Running Cost of Ships. Journal of Traffic and Transportation Engineering, 3 (5). pp. 293-300. ISSN 2328-2142. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Hasović, Zihnija and Ćosić, Boris and Omerbegović Arapović, Adisa and Duić, Neven (2015) Impact of new power investments up to year 2020 on the energy system of Bosnia and Herzegovina. = Impact of new power investments up to year 2020 on the energy system of Bosnia and Herzegovina. Thermal science, 19 (3). pp. 771-780. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 4.

Hermanović, Hrvoje (2015) Projekt sustava grijanja i hlađenja ureda poslovno servisne zgrade. = Design of heating and cooling system for offices in bussiness and services building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Hlebec, Hrvoje (2015) Ovjesna dizalica na konzolnoj stazi. = Hoist on the console craneway. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Hlevnjak, Alen (2015) Točkasto elektrootporno zavarivanje visokolegiranih nehrđajućih čelika. = Spot resistance welding of high alloyed stainless steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Hmura, Kristijan (2015) Optimizacija vršne potrošnje procesne pare. = Process steam peak demand optimisation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Hodja, Tomislav (2015) Projektiranje i regulacija sustava kuglice na ploči pokretanog pneumatskim mišićima. = Design and control of a ball-on-plate system powered by pneumatic muscles. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Hoić, Matija (2015) Modeliranje dinamike suhe dvostruke spojke. = Modeling of dry dual clutch dynamics. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Horvat, Ivan and Dović, Damir (2015) New method for calculating hourly energy need in HVAC systems. = New method for calculating hourly energy need in HVAC systems. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Horvat, Josip (2015) Razvoj robotskog stereotaktičkog okvira za primjenu u neurokirurgiji. = Development of robotic stereotactic frame for application in neurosurgery. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Horvat, Marko (2015) Izračun h-Q karakteristike srčane pumpe. = Heart pump h-Q characteristic calculation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Horvat, Nikola (2015) Uređaj za ispitivanje zupčaničkih maziva. = Gear lubricant test rig. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Horvat, Nino (2015) Implementacija teorije rasta i promjene strukture aorte u paket za konačne elemente. = Numerical implementation of G&R theory in the finite element software. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Horvatić, Filip (2015) Levitacija kuglice u vertikalnoj cijevi. = Ball levitation in a vertical tube. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Horvatić Novak, Amalija and Bošnjaković, Alen and Runje, Biserka (2015) Osiguranje sljedivosti kod primjene računalne tomografije u dimenzionalnom mjeriteljstvu. = In: 15. Hrvatska konferencije o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.

Horvatić Novak, Amalija and Runje, Biserka (2015) Calibration methods of the dimensional metrology X-ray CT system. = Calibration methods of the dimensional metrology X-ray CT system. In: 15. International scientific conference on production engineering Computer Integrated Manufacturing and High Speed Machining CIM 2015, 10-13.06.2015., Vodice, Croatia.

Horvatić Novak, Amalija and Runje, Biserka and Alar, Vesna and Degiuli, Nastia (2015) Computed tomography - a new method in the fields of dimensional metrology and material inspection. = Computed tomography - a new method in the fields of dimensional metrology and material inspection. In: International Conference, MATRIB 2015: Materials, Wear, Recycling In memoriam prof.dr.sc. Gojko Marić, 25-27.06.2015., Vela Luka, Hrvatska.

Hrgar, Robert (2015) Difuzijska metalizacija. = Diffusion metallization. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Hrgarek, Petar (2015) Metode i pogreške kod mjerenja protoka. = Methods and errors in flow measurement. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Hrman, Danijela (2015) Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije. = Reliability of characterization of expanded polystyrene using computed radiography. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Hrnjić, Nino (2015) Vođenje robota primjenom interneta. = Internet remote controlled robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Hršak, Dario (2015) Utjecaj strojnog dijela na kvalitetu odljevka. = Infuence of cast component design on the casting quality. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Hršak, Tomislav (2015) Jednostruki parkirni uređaj dostavnih vozila. = Single parking device for delivery vans. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Hržina, Matija (2015) Analiza proizvodnje u tvornici prediva. = Analysis of the production in the yarn factory. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Hu, Zhongfa and Wang, Xuebin and Luo, Xiaotao and Tan, Houzhang and Mikulčić, Hrvoje and Vujanović, Milan (2015) Particulate Matter and Gas Pollutant Emissions of Biomass Co-firing: an Experimental Study in Drop Tube Furnace. = Particulate Matter and Gas Pollutant Emissions of Biomass Co-firing: an Experimental Study in Drop Tube Furnace. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015, Dubrovnik, Hrvatska.

Hunić, Domagoj (2015) Projekt grijanja stambene zgrade sustavom s dizalicom topline. = Design of heating system with heat pump for residential building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Husajina, Ivan (2015) Analiza trošenja zupčanika diferencijalnog prijenosnika u pogonskom sustavu motornog vozila. = Wear analysis of differential gears in the drive system of a motor vehicle. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

I

Igrec, Bojan (2015) Svjetlovodni senzor za mjerenje vibracija. = Fibre-optic sensor for vibrations measurement. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko and Rudan, Smiljko.

Igrec, Bojan and Bosiljevac, Marko and Rudan, Smiljko and Šipuš, Zvonimir and Babić, Dubravko (2015) Fiber-optic vibration sensor for high-power electric machines. = Fiber-optic vibration sensor for high-power electric machines. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2015), 25.-29. svibanj 2015., Opatija, Croatia.

Igrec, Ivan (2015) Izrada novog konstrukcijskog rješenja prihvata motora na kočnici motora Zöllner. = A new design of the mounting position for the engine on the Zöllner dynamometer. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko and Tomić, Rudolf.

Ilinčić, Petar (2015) Višezonski simulacijski model HCCI motora s razdvojenim rješavačem. = Multi zone simulation model for HCCI engine with a segregated solver. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Ilić, Dražen (2015) Aluminotermijsko zavarivanje tračnica. = Aluminothermic rail welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Iličić, Bojan (2015) Lijevanje osovine od aluminijske legure. = Casting of aluminium alloy shaft. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Im, Hong-Il and Vladimir, Nikola and Malenica, Šime and Ryu, Hong Ryeul and Cho, Dae Seung (2015) Fatigue analysis of HHI SkyBench™ 19000 TEU ultra large container ship with springing effect included. = Fatigue analysis of HHI SkyBench™ 19000 TEU ultra large container ship with springing effect included. In: 7th International Conference on Hydroelasticity in Marine Technology, Split, Hrvatska.

Islam, Muhammad Rabiul and Rahaman, Md. Mashiur and Degiuli, Nastia (2015) Investigation of the causes of maritime accidents in the inland waterways of Bangladesh. = Investigation of the causes of maritime accidents in the inland waterways of Bangladesh. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 66 (1). pp. 12-22. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 3.

Ivanek, Tomislav (2015) Mokro podvodno zavarivanje. = Underwater wet welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Ivančević, Darko (2015) Numerička analiza oštećenja kompozitnih zrakoplovnih konstrukcija primjenom višerazinskih metoda. = Numerical damage analysis of aeronautical composite structures using multiscale methods. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.

Ivasović, Benjamin (2015) Analiza naprezanja u stupu vjetroagregata. = Stress analysis in wind turbine tower. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.

Ivušić, Franjo and Lahodny-Šarc, Olga and Otmačić Ćurković, Helena and Alar, Vesna (2015) Synergistic inhibition of carbon steel corrosion in seawater by cerium chloride and sodium gluconate. = Synergistic inhibition of carbon steel corrosion in seawater by cerium chloride and sodium gluconate. Corrosion science, 98. pp. 88-97. ISSN 0010-938X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Išek, Ivan (2015) Proračun snage vjetro-turbine. = Wind turbine power calculation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

J

Jagarčec, Monika (2015) Hidraulična preša za krzalicu. = Design solution of a hydraulic press for a mould trimming device. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Jagarčec, Valentina (2015) Uređaj za guljenje i narezivanje jabuka. = Device for apple peeling and slicing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Jakovac, Filip (2015) Trošenje oštrica pile za rezanje drveta. = Wear of saw blades for wood cutting. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Jakovljević, Matko (2015) Analiza tržišta medicinskih vozila u Republici Hrvatskoj. = Market analysis of medical vehicles in Republic of Croatia. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Jakovljević, Suzana and Džoić, Marko (2015) Trajnost matrice za izvlačenje cijevi rashladnih uređaja. = Durabilty of dies for drawing cooling device pipes. In: Matrib 2015. Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić, 25-27.06.2015., Vela Luka, Hrvatska.

Jakovljević, Suzana and Šućur, Nada (2015) Trošenje klipnjače koljenastog vratila dvotaktnog motora s vanjskim paljenjem. = Wear of crankshaft of two-stroke engine with external ignition. In: Matrib 2015. Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić, 25-27.06.2015., Vela Luka ; Korčula ; Hrvatska.

Jakšetić, Julije and Pečarić, Josip (2015) Steffensen’s inequality for positive measures. = Steffensen’s inequality for positive measures. Mathematical Inequalities and Applications, 18 (3). pp. 1159-1170. ISSN 1331-4343. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Jakšetić, Julije and Pečarić, Josip and Praljak, Marjan (2015) Generalized Jensen-Steffensen and related inequalities. = Generalized Jensen-Steffensen and related inequalities. Journal of mathematical inequalities, 9 (4). pp. 1287-1302. ISSN 1846-579X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Jakšetić, Julije and Pečarić, Josip and Praljak, Marjan (2015) A monotonic refinement of Levinson’s inequality. = A monotonic refinement of Levinson’s inequality. Journal of inequalities and applications, 162 (2. ISSN 1029-242X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Jakšetić, Julije and Pečarić, Josip and Smoljak Kalamir, Ksenija (2015) Extension of Cerone's generalizations of Steffensen's inequality. = Extension of Cerone's generalizations of Steffensen's inequality. Jordan Journal of Mathematics and Statistics, 8 (2). pp. 179-194. ISSN 2075-7905. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Jakšić, Fran (2015) Nuklearne elektrane danas. = Nuclear power plants today. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Jakšić, Tomislav (2015) Analiza i poboljšanje apsolutne točnosti robota za primjenu u neurokirurgiji. = Robot absolute accuracy analysis and improvement for robot application in neurosurgery. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2015) On the Optimization of Shape Parameters in the Local Radial Point Interpolation Collocation Method for Modeling of Heterogeneous Materials. = On the Optimization of Shape Parameters in the Local Radial Point Interpolation Collocation Method for Modeling of Heterogeneous Materials. In: 8th International Congress of Croatian Society of Mechanics, 29.9.-2.10.2015., Opatija, Hrvatska.

Jambrečić, Lea (2015) Primjena metode težinskih funkcija u analizi propagacije pukotine kroz ukrepljen panel. = Application of weight function method in the assessment of crack propagation through stiffened panel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.

Janjiš, Ivan (2015) Uređaj za čišćenje staklenih pročelja zgrada. = Building facades cleaning system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Janković, Ivan (2015) Elektrohidraulički robotski manipulator. = Electrohydraulic robotic manipulator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Jarak, Tomislav and Pustaić, Dragan and Lovrenić- Jugović, Martina and Kovačić, Luka (2015) Verification of Numerical Creep Analysis of Thick- Walled Pressure Vessels and Piping. = Verification of Numerical Creep Analysis of Thick- Walled Pressure Vessels and Piping. In: 8th International Congress of Croatian Society of Mechanics, 29.9.-2.10.2015., Opatija, Hrvatska.

Jasak, Hrvoje and Vukčević, Vuko and Gatin, Inno (2015) Numerical Simulation of Wave Loading on Static Offshore Structures. = Numerical Simulation of Wave Loading on Static Offshore Structures. In: CFD for Wind and Tidal Offshore Turbines. Springer International Publishing, pp. 95-105. ISBN 978-3-319-16201-0

Jelić, Ana (2015) Analiza primjene algoritama problema trgovačkog putnika kod komisioniranja unutar visokoregalnog skladišta s vrlo uskim prolazima. = Analysis of application of TSP algorithms for order-picking in VNA warehouse. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Jelić, Tin (2015) Zračna mikroturbina sa ejektorom. = Air microturbine with ejector. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Jerbić, Bojan and Nikolić, Gojko and Chudy, Darko and Švaco, Marko and Šekoranja, Bojan (2015) Robotic application in neurosurgery using intelligent visual and haptic interaction. = Robotic application in neurosurgery using intelligent visual and haptic interaction. International Journal of Simulation Modelling, 14 (1). pp. 71-84. ISSN 1726-4529. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 5.

Jerbić, Bojan and Stipančić, Tomislav and Tomašić, Tomislav (2015) Robotic bodily aware interaction within human environments. = Robotic bodily aware interaction within human environments. In: SAI Intelligent Systems Conference, IntelliSys 2015, 10-11.11.2015., Velika Britanija, London.

Jerković, Pavao (2015) Rashladnik kapljevine za niskotemperaturno hlađenje. = Chiller for low temperature cooling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Johnson, Perry L. and Pent, M Jared and Jasak, Hrvoje and Portillo, J. Enrique (2015) Application of a Riemann Solver Unstructured Finite Volume Method to Combustion Instabilities. = Application of a Riemann Solver Unstructured Finite Volume Method to Combustion Instabilities. Journal of Propulsion and Power, 31 (3). pp. 937-950. ISSN 0748-4658. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.

Jokić, Andrej and Bosch, P.P.J. van den (2015) Nodal pricing of power balance control services in electrical power systems. = Nodal pricing of power balance control services in electrical power systems. In: 2015 American Control Conference, ACC 2015, 01-03.07.2015., Chicago, SAD.

Jugović, Antun (2015) Ispitivanje kupke za umjeravanje termometara. = Testing of thermometer calibration bath. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Juraga, Ivan and Alar, Vesna and Stojanović, Ivan and Šimunović, Vinko and Ćudić, Dinko (2015) Corrosion and modern corrosion protection methods in the splash zone. = Corrosion and modern corrosion protection methods in the splash zone. In: 15th International Scientific Conference on Production Engineering, 10-13.06.2015., Vodice, Hrvatska.

Juraga, Ivan and Ljubić, Kruno and Živčić, Milan and Garašić, Ivica (2015) Pogreške u zavarenim spojevima. = Defects in weld joints. Hrvatsko društvo za tehniku zavarivanja, Zagreb, -. ISBN 978-953-7518-06-6

Juretić, Hrvoje and Montalbo-Lomboy, Melissa and van Leeuwen, (Hans) J. and Cooper, William J. and Grewell, David (2015) Hydroxyl radical formation in batch and continuous flow ultrasonic systems. = Hydroxyl radical formation in batch and continuous flow ultrasonic systems. Ultrasonics sonochemistry, 22. pp. 600-606. ISSN 1350-4177. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Juretić, Hrvoje and Smoljanić, Goran and Ahac, Igor (2015) Removal of natural organic matter from surface waters by enhanced coagulation. = Removal of natural organic matter from surface waters by enhanced coagulation. In: 11th International Conference Laboratory Competence 2015, 21-24.10.2015., Zadar, Hrvatska.

Juretić, Hrvoje and Smoljanić, Goran and Barta, Marija (2015) Degradation of Natural Organic Matter in Water by Using UV-C/H2O2 Process. = Degradation of Natural Organic Matter in Water by Using UV-C/H2O2 Process. The Holistic Approach to Environment, 5 (3). pp. 135-149. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Jurica, Maja (2015) Utjecaj zaštitnoga plina i načina prijenosa metala na svojstva zavarenoga spoja čelika X80. = Influence of the shielding gas and metal transfer on the X80 weld joint properties. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Jurica, Maja and Garašić, Ivica and Kožuh, Zoran (2015) Usporedba konvencionalnog i CBT načina prijenosa metala u području prijelaznog luka. = Comparison of conventional and CBT metal transfer in transition arc transfer mode. In: 8. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SB 2015. “ SUVREMENI PROIZVODNI POSTUPCI, OPREMA I MATERIJALI ZA ZAVARENE KONSTRUKCIJE I PROIZVODE”, Slavonski Brod, Hrvatska.

Jurinjak, Bojan (2015) Projekt sustava grijanja i hlađenja stambene zgrade. = Design of heating and cooling system for residential building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Jurić, Filip (2015) Mjerna nesigurnost u kontaktnoj termometriji. = Measurement uncertainty in contact thermometry. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Jurić, Ivan (2015) Zavarivanje tramvajskih tračnica samozaštičujućom praškom punjenom žicom. = Welding of tram rails with selfshielded flux cored wire. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Jurišić, Paul and Parunov, Joško (2015) Influence of corrosion-related degradation of mechanical properties of shipbuilding steel on collapse strength of plates and stiffened panels. = Influence of corrosion-related degradation of mechanical properties of shipbuilding steel on collapse strength of plates and stiffened panels. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015, 21-24.09. 2015., Pula, Hrvatska.

Jurčević Lulić, Tanja (2015) Ergonomija i sigurnost djece. = Ergonomics and children’s safety. Paediatria Croatica. Supplement, 59. pp. 155-160. ISSN 1330-724X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

K

Kamenar, Jelena (2015) Naprezanja u parodontnom ligamentu kod ortodontskog pomaka zuba. = Stress in the periodontal ligament during orthodontic tooth movement. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.

Kapetanović, Lea (2015) Primjena cluster analize u projektiranju proizvodnih sustava. = Application of cluster analysis in the design of manufacturing systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Karaga, Ivan (2015) Analiza primjene tehnike njihanja pri robotiziranom MAG zavarivanju. = Analysis of robotized MAG weaving pattern application. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Kasap, Luka (2015) Trenažer za pse pokretan ljudskom snagom pomoću bicikla. = Man powered dog treadmill. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Katalinić, Marko and Ćorak, Maro and Parunov, Joško (2015) Analysis of wave heights and wind speeds in the Adriatic Sea. = Analysis of wave heights and wind speeds in the Adriatic Sea. In: Maritime Technology and Engineering, 05-07.10.2014., Lisbon, Portugal.

Katić, Marko and Šimunović, Vedran and Baršić, Gorana and Mudronja, Vedran (2015) Calibration of line scales at HMT/FSB-LMPD. = Calibration of line scales at HMT/FSB-LMPD. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015, Vodice, Croatia.

Katić, Višnja and Mandić, Vilko and Ježek, Damir and Baršić, Gorana and Špalj, Stjepan (2015) Influence of various fluoride agents on working properties and surface characteristics of uncoated, rhodium coated and nitrified nickel- titanium orthodontic wires. = Influence of various fluoride agents on working properties and surface characteristics of uncoated, rhodium coated and nitrified nickel- titanium orthodontic wires. Acta odontologica scandinavica, 73 (4). pp. 241-249. ISSN 0001-6357. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 5.

Katičić, Ljiljana and Dulčić, Želimir and Lisjak, Dragutin (2015) Concept of physical asset management. = Concept of physical asset management. In: 11th International Conference Challenges of Europe:Growth, Competitiveness and Inequality, 27.-29.05.2015., Split-Hvar, Hrvatska.

Kekez, Marko (2015) Kalibracija viskozimetara za određivanje kinematske i dinamičke viskoznosti i provjera viskoznosti različitih motornih ulja. = Calibration of viscometers for determination of kinematic and dynamic viscosity and checking of viscosity for different motor oils. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Kelčec-Pester, Matija (2015) Konstrukcijsko rješenje oscilirajuće brusilice za drvo. = Design solution for a oscillating spindle sander for wood. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Keran, Zdenka (2015) Kovanje i kovanice. = Forging and coins. Hrvatsko interdisciplinarno društvo, Zagreb, -. ISBN 978-953-7568-00-9

Keran, Zdenka and Ciglar, Damir and Piljek, Petar (2015) FEM support to similarity theory in metal forming. = FEM support to similarity theory in metal forming. In: 15th International Scientific Conference on Production Engineering, 10-13.06.2015., Vodice, Hrvatska.

Kerolli-Mustafa, Mihone and Ćurković, Lidija and Fajković, Hana and Rončević, Sanda (2015) Ecological risk assessment of jarosite waste disposal. = Ecological risk assessment of jarosite waste disposal. Croatica chemica acta, 88 (2). pp. 189-196. ISSN 0011-1643. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Kirić, Nikola (2015) Primjena 3D vizijskog sustava za praćenje objekata robotom u realnom vremenu. = Application of 3D vision system for object tracking by robot in real time. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Kitarović, Stanislav and Andrić, Jerolim and Pirić, Karlo (2015) Elastic shear buckling capacity of the longitudinally stiffened flat panels. = Elastic shear buckling capacity of the longitudinally stiffened flat panels. In: 5th International Conference on Marine Structures, 25.-27.03.2015., Southampton, UK.

Kitarović, Stanislav and Andrić, Jerolim and Pirić, Karlo (2015) Rational magnification of the plate elastic shear buckling strength. = Rational magnification of the plate elastic shear buckling strength. Thin-walled structures, 94. pp. 167-176. ISSN 0263-8231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Kitarović, Stanislav and Andrić, Jerolim and Pirić, Karlo and Bičak, Mateja (2015) Progressive collapse analysis of a bulk carrier using IACS prescribed and NLFEM derived load - end shortening curves. = Progressive collapse analysis of a bulk carrier using IACS prescribed and NLFEM derived load - end shortening curves. In: 16th International Maritime Association of the Mediterranean Congress, 21-24.09.2015., Pula, Hrvatska.

Kišmartin, Edit (2015) Prerada industrijske konoplje. = Hemp utilization. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Klapač, Josip (2015) Numerička analiza konstrukcije poda helikoptera pri udaru o tlo. = Numerical analysis of the helicopter floor structure at groud impact. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.

Klinac, Tomislav (2015) Utjecaj klorida na brzinu korozije aluminijskih legura. = The effect of chloride on the corrosion rate of aluminum alloys. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Kolar, Davor and Lisjak, Dragutin and Tošić, Marina (2015) Application of data mining techniques in small-series job shop. = Application of data mining techniques in small-series job shop. In: 5th International Conference on Production Engineering and Management 2015, 01.-02.10.2015., Trieste, Italy.

Kolarek, Vedran (2015) Tvrdoća i lomna žilavost cirkonij oksidne keramike. = Hardness and fracture toughness of zirconia ceramics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Komazec, Petra (2015) Značajke otpora i propulzije brzih teretnih brodova u mirnoj vodi. = Resistance and propulsion characteristics of high speed cargo ships in still water. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.

Komušanac, Ivan (2015) Analiza utjecaja izgradnje vjetroelektrana i fotonaponskih sustava na opterećenje elektroenergetskog sustava Republike Hrvatske. = Analysis of construction of wind plants and photovoltaic systems and their impact on the power system load of the Republic of Croatia. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Komušanac, Ivan and Ćosić, Boris (2015) Impact of wind and photovoltaic power plants installation share on the country power system load: case of Croatia. = Impact of wind and photovoltaic power plants installation share on the country power system load: case of Croatia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Komušanac, Ivan and Ćosić, Boris and Perković, Luka and Duić, Neven (2015) Experience with solar-driven LiBr/H2O absorption cooling system in Vodovod Dubrovnik d.o.o. = Experience with solar-driven LiBr/H2O absorption cooling system in Vodovod Dubrovnik d.o.o. In: 12. International Conference on Accomplishment in Electrical and Mechanical Engineering and Information Technology, 29.-30.5.2015., Banja Luka, Bosna i Hercegovina.

Koren, Nikola (2015) Mobilna aplikacija za upravljanje dijeljenjem automobila. = Mobile application for carsharing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Kovač, Andrea (2015) Zaštita brodskog trupa antivegetativnim premazima. = Ship Hull protection by antifouling coatings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stojanović, Ivan.

Kovačec, Miroslav (2015) Model učinkovitoga upravljanja proizvodnim sustavima. = Efficient management model of production systems. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Kovačić, Luka (2015) Analiza naprezanja u debelostijenim cilindričnim posudama i cijevima. = Stress analysis in thick-walled cylindrical vessels and tubes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.

Kovačić, Nikola (2015) Izbor materijala za oplatu mlina za usitnjavanje pri recikliranju električnog i električkog otpada. = Materials selection for the plating mill for electrical and electronic waste recycling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Kovačić, Saša (2015) Utjecaj nitriranja i prevlačenja na svojstva alatnih čelika za topli rad. = Influence of nitriding and coatings on the properties of hot work tool steels. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Kovačić, Saša and Cajner, Franjo and Landek, Darko (2015) Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel. = Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel. Key Engineering Materials, 674. pp. 257-262. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Kozarac, Darko and Tomić, Rudolf and Taritaš, Ivan and Chen, Jyh-Yuan and Dibble, Robert W. (2015) A Model for Prediction of Knock in the Cycle Simulation by Detail Characterization of Fuel and Temperature Stratification. = A Model for Prediction of Knock in the Cycle Simulation by Detail Characterization of Fuel and Temperature Stratification. SAE International Journal of Engines, 8 (4). pp. 1520-1534. ISSN 1946-3936. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Kozmar, Hrvoje and Allori, Davide and Bartoli, Gianni and Borri, Claudio (2015) Offshore wind-turbine wake in the vicinity of coastal mountains and islands. = Offshore wind-turbine wake in the vicinity of coastal mountains and islands. In: 14th International Conference on Wind Engineering, 21.-26.06.2015., Porto Alegre, Brazil.

Kozmar, Hrvoje and Butler, Kyle and Kareem, Ahsan (2015) Downslope gusty wind loading of vehicles on bridges. = Downslope gusty wind loading of vehicles on bridges. Journal of bridge engineering, 20 (11). 04015008-1. ISSN 1084-0702. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 3.

Kozmar, Hrvoje and Križan, Josip and Gašparac, Goran and Antonić, Oleg and Grisogono, Branko (2015) Designing laboratory wind simulations using artificial neural network. = Designing laboratory wind simulations using artificial neural networks. Theoretical and Applied Climatology, 120 (3/4). pp. 723-736. ISSN 0177-798X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 5.

Kozmar, Hrvoje and Lepri, Petra and Večenaj, Željko and Grisogono, Branko (2015) Near-ground turbulence of the Bora wind in summertime. = Near-ground turbulence of the Bora wind in summertime. Journal of wind engineering and industrial aerodynamics, 147. pp. 345-357. ISSN 0167-6105. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.

Kozmar, Hrvoje and Pospišil, Stanislav and Buljac, Andrija and Kuznetsov, Sergey (2015) Influence of vehicles on bridge flutter and galloping. = Influence of vehicles on bridge flutter and galloping. In: Symposium on Progress in Wind Engineering and Structural Dynamics 2015, 01.-02.11.2015., New Taipei City, Taiwan.

Košćak, Hrvoje (2015) Dimenzioniranje, modeliranje i simulacija električnog pogona gradskog autobusa. = Dimensioning, modelling and simulation of a city bus electric powertrain. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Kragulj, Igor (2015) Sustavi kočenja teretnih cestovnih motornih vozila. = Braking systems of commercial vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ormuž, Krunoslav.

Krajna, Tamara and Mišetić, Marijana and Matković Mikulčić, Katica (2015) The activities of the Croatian Library Association in the field of lifelong education and professional development for library and information professionals. = The activities of the Croatian Library Association in the field of lifelong education and professional development for library and information professionals. In: The 5th Colloquium of Library and Information Experts of V4+ Countries, 08-09.06.2015., Bratislava; Slovakia.

Kralj, Petra (2015) Karakterizacija materijala za dentalne implantate. = Characterisation of materials for dental implants. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Kraljić, Nikola (2015) Proračun propelera za pogon malog pomoćnog čamca. = Design of impeller for dingy thrust. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Kram, Mateja and Tošanović, Nataša and Hegedić, Miro (2015) Kaizen Approach to Supply Chain Management: First Step for Transforming Supply Chain into Lean Supply Chain. = Kaizen Approach to Supply Chain Management: First Step for Transforming Supply Chain into Lean Supply Chain. ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, 13 (1). pp. 161-164. ISSN 1584-2665. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Kraševac, Katarina (2015) Optimizacije propulzije plovila na ljudski pogon. = Optimization of propulsion of human powered boat. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.

Krcatović, Ivan (2015) Analiza stabilnosti i upravljivosti male bespilotne letjelice. = Stability and control analysis for small unmanned aircraft. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Krijan, Ljubo (2015) Kemijsko i toplinsko modificiranje drva. = Chemical and thermal modification of wood. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Krizmanić, Petar (2015) Analiza učinkovitosti kogeneracijskog postrojenja na otpad. = Efficiency analysis of the waste-to-energy CHP plant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.

Krmelić, Nikola (2015) Izračun snage parne turbine pomoću dijagrama režima rada. = Calculation of steam turbine power using operation diagram. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Krnić, Luka (2015) Automobilsko sjenilo. = Sun visor for cars. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Krstulović-Opar, Lovre and Surjak, Martin and Vesenjak, Matej and Tonković, Zdenko and Kodvanj, Janoš and Domazet, Željko (2015) Comparison of infrared and 3D digital image correlation techniques applied for mechanical testing of materials. = Comparison of infrared and 3D digital image correlation techniques applied for mechanical testing of materials. Infrared physics & technology, 73. pp. 166-174. ISSN 1350-4495. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

Krznar, Nino and Kos, Josip and Pilipović, Ana (2015) Application of reverse engineering in the development of polymer products for manufacturing by additive technologies. = Application of reverse engineering in the development of polymer products for manufacturing by additive technologies. In: 15th International Scientific Conference on Production Engineering - CIM 2015, 10-13.06.2015., Vodice, Hrvatska.

Krznar, Nino and Šercer, Mladen and Pilipović, Ana (2015) Razvoj i izrada polimernog proizvoda pomoću taložnog očvršćivanja. = Development and production of polymer product with fused deposition modeling. Tehničke znanosti : glasnik Akademije tehničkih znanosti Hrvatske, 19 (1). pp. 9-15. ISSN 1330-7207. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Kuliš, Ante (2015) Planiranje i upravljanje proizvodnjom korištenjem KANBAN sustava. = Production planning and control using KANBAN system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Kunšt, Andrea (2015) Off-line programiranje mjernog robota. = Off-line programming of measuring robot. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.

Kupres, Karlo (2015) Kompozitni materijali proizvedeni od otpadnog papira. = Composite materials produced from waste paper. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Kurelja, Luka (2015) Regulacija temperature makete. = Mock up temperature control. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Kus, Jurica (2015) Proračun koeficijenata uzgona i otpora rotora vjero-turbine. = Wind turbine lift and drag cofficient calculation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Kuš, Igor (2015) Razvoj industrijskog generatora dušika. = Development of an industrial nitrogen generator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Kušar, Dominik (2015) Ispitivanje utjecaja ultrazvučne pobude tekućeg sredstva za gašenje na deformacije kaljenog valjka od čelika C45. = Testing the influence of ultrasonic excitation of liquid quenchant on deformations in hardened cylinder made from steel grade C45. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.

Kveštak, Nikola (2015) Napajanje odljevka od aluminijske legure. = Risering of aluminium alloy casting. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

L

Landek, Darko and Cajner, Franjo and Kovačić, Saša and Alar, Vesna and Macura, Vladimir (2015) Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel. = Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel. In: The European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, 20-22.05.2015, Venecija, Italija.

Landek, Darko and Župan, Josip and Filetin, Tomislav (2015) Influence of quenching in water based nanofluid on quench distortions in long cylinders. = Influence of quenching in water based nanofluid on quench distortions in long cylinders. In: 5th International Conference on DISTORTION ENGINEERING, Bremen, Njemačka.

Lažeta, Zvonimir (2015) Bežično upravljanje mobilne hidrauličke platforme s teleskopskom dizalicom. = Wireless control of a mobile hydraulic platform with telescopic crane. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Leder Horina, Jasna (2015) Modeliranje iniciranja koštane pregradnje kod ortodontske terapije. = Modelling of initiation of bone remodelling due to orthodontic treatment. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja and Rietbergen, Bert van.

Leko, Marko (2015) Primjena radiografske tehnike raspršenog zračenja kod nerazornog ispitivanja zrakoplovnih komponenti. = Application of Backscatter Radiography Technique for NDT of aircraft components. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Leljak, Vlatko (2015) Primjena polimernih kompozita u sportovima na vodi. = Application of polymer composites in water sports. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Lerher, Tone and Ekren, Banu and Đukić, Goran and Rosi, Bojan (2015) Travel time model for shuttle-based storage and retrieval systems. = Travel time model for shuttle-based storage and retrieval systems. International journal of advanced manufacturing technology, 78 (9-12). pp. 1705-1725. ISSN 0268-3768. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 4.

Lerher, Tone and Potrć, Iztok and Kramberger, Tomaž and Rosi, Bojan and Đukić, Goran (2015) Lean and green @ intralogistic - case study: SBS/RS versus AS/RS. = Lean and green @ intralogistic - case study: SBS/RS versus AS/RS. In: XIII. INTERNATIONAL LOGISTICS & SUPPLY CHAIN CONGRESS 2015, 22.-23.10.2015., Izmir, Turska.

Lesičar, Tomislav (2015) Višerazinsko modeliranje heterogenih materijala primjenom homogenizacije drugog reda. = Multiscale modeling of heterogeneous materials using second-order homogenization. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Lesičar, Tomislav and Sorić, Jurica and Tonković, Zdenko (2015) A large strain multiscale approach using C1 continuity finite element. = A large strain multiscale approach using C1 continuity finite element. In: International Conference on Multi-scale Computational Methods for Solids and Fluids (2 : 2015), 10.-12.06.2015., Sarajevo, Bosna i Hercegovina.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2015) C1 Microlevel Second-Order Computational Homogenization. = C1 Microlevel Second-Order Computational Homogenization. In: International Congress of Croatian Society of Mechanics (8 ; 2015), 29.09.-02.10.2015., Opatija, Hrvatska.

Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2015) Second-Order Computational Homogenization Scheme Preserving Microlevel C1 Continuity. = Second-Order Computational Homogenization Scheme Preserving Microlevel C1 Continuity. In: International Conference on Fracture and Damage Mechanics, 23.-25. 09. 2014., Azori, Portugal.

Levačić, Lidija (2015) Trokomponentne plinske mješavine za MAG zavarivanje. = Threecomponent gas mixtures for MAG welding. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Leš, Marko (2015) Bežični nadzor i upravljanje industrijskih procesa. = Wireless monitoring and control of industrial processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Liović, Ante (2015) Postrojenje za pripremu kalupne mješavine pijeska u ljevaonicama. = Foundry sand preparation plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Lisak, Tomislav (2015) Poboljšanje kontrole parametara procesa toplinske obrade. = Improvement of parameter control of the heat treatment process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Ljoljo, Dinko (2015) Tehnička i tehnološka rješenja problema mikrobiološkog zagađenja u sustavima potrošne tople vode javnih objekata. = Technical and technological solutions for the problem of microbial contamination in hot water systems of public buildings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Ljubas, Davor and Smoljanić, Goran and Juretić, Hrvoje (2015) Degradation of Methyl Orange and Congo Red dyes by using TiO2 nanoparticles activated by the solar and the solar-like radiation. = Degradation of Methyl Orange and Congo Red dyes by using TiO2 nanoparticles activated by the solar and the solar-like radiation. Journal of environmental management, 161. pp. 83-91. ISSN 0301-4797. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1(2015). Točan broj autora: 3.

Ljubas, Davor and Ćurković, Lidija and Marinović, Veronika and Bačić, Ivana and Tavčar, Branka (2015) Photocatalytic degradation of azo-dyes by sol- gel TiO2 films: effects of polyethylene glycol addition, reaction temperatures and irradiation wavelengths. = Photocatalytic degradation of azo-dyes by sol- gel TiO2 films: effects of polyethylene glycol addition, reaction temperatures and irradiation wavelengths. Reaction Kinetics, Mechanisms and Catalysis, 116 (2). pp. 563-576. ISSN 1878-5190. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3(2015). Točan broj autora: 5.

Ljubičić, Matej (2015) Izrada modela i proračun naprezanja sklopa klipa,cilindra i glave motora HATZ. = Model creation and stress analysis of piston, cylinder and head assembly of HATZ engine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Lojen, Stjepan (2015) Podrška odlučivanju kod odabira primarnog procesa u projektiranju tehnološkog procesa. = Decision support in primary process selection during process planning. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Lončarek, Igor (2015) Konstrukcija 6-osne robotske ruke za MAG zavarivanje. = Design solution of 6-axis robotic arm for MAG welding. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Lončarević, Vedrana (2015) Analiza osjetljivosti odziva konstrukcije krila metodom konačnih elemenata. = Finite element sensitivity analysis of wing structural response. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Prebeg, Pero.

Lovrak, Ana (2015) Idejno rješenje 700 kW ORC kogeneracijskog postrojenja loženog drvnom biomasom. = Conceputal design of 700 kW ORC biomass fired cogeneration plant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Lukas, Marin (2015) Automatsko punjenje eMiR mobilnog robota. = Mobile robot Automatic charging system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Lukač, Filip (2015) Numerička analiza udara projektila u izotropnu višeslojnu ploču. = Numerical analysis of projectile impact at isotropic layered plate. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.

Lukač, Sandro (2015) Primjena statističkih metoda analize i optimizacije proizvodnog procesa uporabom dostupnog programskog paketa. = Use of statistical methods for analyzing and optimization of production process using available computer software. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

M

Macura, Hrvoje (2015) Automatsko upravljanje sustava robotske glave i ruke. = Automatic control of a robot head and arm. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Majača, Sanela (2015) Izbor strategije održavanja primjenom metoda višekriterijalnog odlučivanja. = Selection of maintenance strategy using multicriteria decision methods. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Majdak, Ivan (2015) Trošenje lanaca motornih pila lančanica. = Wear of chain on chainsaw. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Majdandžić, Mario (2015) Dizalica topline voda-voda za grijanje i hlađenje poslovne zgrade. = Water-to-water heat pump for heating and cooling of commercial building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Majher, Sonja (2015) Razlučivanje orijentacije linijskih indikacija pri ispitivanju ultrazvukom. = Resolving the orientation of linear indications within ultrasonic testing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.

Majić Renjo, Marijana and Ćurković, Lidija and Grilec, Krešimir (2015) Erosion Resistance of Slip Cast Composite Al2O3 - ZrO2 Ceramics. = Erosion Resistance of Slip Cast Composite Al2O3 - ZrO2 Ceramics. Procedia Engineering, 100. pp. 1133-1140. ISSN 1877-7058. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Majić Renjo, Marijana and Ćurković, Lidija and Grilec, Krešimir and Ciglar, Damir (2015) Preparation of slip cast composite Al2O3 - ZrO2 ceramics. = Preparation of slip cast composite Al2O3 - ZrO2 ceramics. In: 15th International Scientific Conference on Production Engineering, 10.-13.06.2015., Vodice, Hrvatska.

Malenica, Šime and Vladimir, Nikola and Choi, Young Myung and Senjanović, Ivo and Kwon, Sun Hong (2015) Global hydroelastic model for liquid cargo ships. = Global hydroelastic model for liquid cargo ships. In: 7th International Conference on Hydroelasticity in Marine Technology, 16-19.09.2015., Split, Hrvatska.

Mance, Ines and Gessert, Rene and Mihalic Pokopec, Ivana and Bauer, Branko (2015) Application of casting simulation for sand casting of a ductile iron flange. = Application of casting simulation for sand casting of a ductile iron flange. In: CIM 2015-15th International Scientific Conference on Production Engineering, 10-13.06.2015, Vodice, Republika Hrvatska.

Mandir, Mario (2015) Primjena EtherCAT sabirnice u upravljačkim sustavima obradnih strojeva. = Application of EtherCAT fieldbus in the machine tool control systems. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Maračić, Bojan (2015) Dizalice topline tlo-voda za grijanje stambene zgrade. = Groud source heat pump for heating of residential building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Marijanović, Ivan (2015) Specifičnosti sastava i primjene motornih ulja za četveotaktne i dvotaktne motore s unutarnjim izgaranjem. = Specifics of the compostition and application of motor oils for four-stroke and two-stroke internal combustion engines. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Marinić, Robert (2015) Projekt skladištenja duboko smrznutog mesa. = Design of a refrigeration system for storage of frozen meat. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.

Marić, Ivo (2015) Konstrukcija funkcionalne proteze šake. = Design of a funcional fist prosthesis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Maričić, Hrvoje (2015) Stabilnost osteosinteze pločicama kod prijeloma distalnog humerusa. = Stability of fixation of distal humerus fracture using plates. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.

Marjanović, Dorian and Štorga, Mario and Žeželj, Dragan and Flegarić, Stjepan and Domboš, Mario and Mihelić, Mirjana and Matan, Mladen and Mihalić, Igor (2015) ALSTOM project report: Conceptual Design for New EGH. = ALSTOM project report: Conceptual Design for New EGH. UNSPECIFIED.

Marko, Pulić (2015) Precipitacijsko očvršćivanje toplinski obradive aluminijeve legure. = Precipitation hardening of the heat treatable aluminium alloy. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Marković, Tomislav (2015) Regulacija položaja hidrauličkog cilindra pomoću industrijskog PLC uređaja. = Position control of a hydraulic cylinder using an industrial PLC device. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Markučič, Damir and Katić, Marko (2015) Comparison of x-ray vision systems. = Comparison of x-ray vision systems. In: 15. International scientific conference on production engineering, 10-13.06.2015., Vodice, Hrvatska.

Markučič, Vedrana (2015) Istraživanje otpora potopljenog dijela jedrilice klase Optimist. = Research of sail-boat class Optimist hull resistance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Martić, Ivana and Degiuli, Nastia and Ćatipović, Ivan (2015) Added resistance in waves of intact and damaged ship in the Adriatic sea. = Added resistance in waves of intact and damaged ship in the Adriatic sea. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 66 (2). pp. 1-14. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 3.

Martić, Ivana and Degiuli, Nastia and Ćatipović, Ivan (2015) Seakeeping characteristics of intact and damaged ship in the Adriatic Sea. = Seakeeping characteristics of intact and damaged ship in the Adriatic Sea. In: 16th International Congress of the International Maritime Association of the Mediterranean, IMAM 2015, 21-24.09.2015., Pula.

Marušić, Ante and Lončar, Dražen and Batelić, Jakov and Franković, Valdi (2015) Increasing flexibility of coal power plant by control system modifications. = Increasing flexibility of coal power plant by control system modifications. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Matak, Nikola (2015) Zajednički Akcijski plan energetski održivog razvitka za općine otoka Korčule prema opciji 2 Sporazuma gradonačelnika. = Joint Sustainable energy action plan for municipalities of the Korcula island according to the option 2 of Covenant of Mayors. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.

Matak, Nikola and Krajačić, Goran and Pilato, Ana Marija (2015) Joint Sustainable energy action plan for municipalities of the Korcula island according to the option 2 of the Covenant of Mayors. = Joint Sustainable energy action plan for municipalities of the Korcula island according to the option 2 of the Covenant of Mayors. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Matasić, Ivan (2015) Zaštitni premazi s visokim udjelom cinka. = Zinc rich protective coatings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stojanović, Ivan.

Mateša, Branko and Kožuh, Zoran and Dunđer, Marko and Samardžić, Ivan (2015) Determination of clad plates residual stresses by x - ray diffraction method. = Determination of clad plates residual stresses by x - ray diffraction method. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (6). pp. 1533-1538. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Math, Dino (2015) Konstruiranje kalupa za injekcijsko prešanje zaštitne maske za mobitel. = Design of mould for injection moulding of mobile phone protective mask. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Matija, Denis (2015) Zavarivanje željezničkih vozila i sastavnih dijelova shodno normi HRN EN 15085. = Welding of railway vehicles and components according to standard HRN EN 15085. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Matijašević, Dubravko and Terze, Zdravko and Vrdoljak, Milan (2015) Composed Fluid - Structure Interaction Spatial Interface for Horizontal Axis Wind Turbine Rotor. = Composed Fluid - Structure Interaction Spatial Interface for Horizontal Axis Wind Turbine Rotor. ASME Journal of Computational and Nonlinear Dynamics, special issue "Wind Turbine Modeling and Simulation, 10(4). 041009-1. ISSN 1555-1415. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Matić, Ivan (2015) Davisov upravljački sustav za bolid Formule Student. = Davis steering system for Formula Student race car. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Matić, Zvonimir (2015) Dizalica topline u sustavu podnog grijanja. = Heat pump in the underfloor heating system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.

Mađer, Marko (2015) Traktorski priključak za posipanje soli. = Agricultural vehicle extension for salt spreading. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Midžić, Ida and Štorga, Mario and Marjanović, Dorian (2015) Eco-Evaluation In Conceptual Design Phase – A Case Study. = Eco-Evaluation In Conceptual Design Phase – A Case Study. Transactions of FAMENA, 39 (3). pp. 47-60. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Midžić, Ida and Štorga, Mario and Marjanović, Dorian (2015) Eco-evaluation of Technical Systems in the Conceptual Phase. = Eco-evaluation of Technical Systems in the Conceptual Phase. In: International Conference on Engineering Design (ICED15), 27.-30.07.2015., Milano, Italija.

Mihalinec, Dominik (2015) Relativno vođenje robota koristeći 3D vizijski sustav. = Relative guidance of a robot using 3D vision system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Mihaljević, Morana (2015) Procjena mjerne nesigurnosti ultrazvučnog mjerenja debljine stijenke. = Measurement uncertainty estimation of the ultrasonic thickness measurement. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Mihaljević, Morana and Markučič, Damir and Runje, Biserka (2015) Analysis of influential factors for ultrasonic disc size evaluation. = Analysis of influential factors for ultrasonic disc size evaluation. Materials Testing, 57 (7-8). pp. 674-679. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Mikulaj, Petar (2015) Mjerenje protočne količine oštrom prigušnicom. = Determination of fluid flow by orrifice plate measuring device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Mikulandrić, Robert and Krajačić, Goran and Duić, Neven and Khavin, Gennadii and Lund, Henrik and Vad Mathiesen, Brian (2015) Performance Analysis of a Hybrid District Heating System: A Case Study of a Small Town in Croatia. = Performance Analysis of a Hybrid District Heating System: A Case Study of a Small Town in Croatia. Journal of Sustainable Development of Energy, Water and Environment Systems, 3 (3). pp. 282-302. ISSN 1848-9257. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 6.

Mikulandrić, Robert and Lončar, Dražen and Böhning, Dorith and Böhme, Rene and Beckmann, Michael (2015) Process performance improvement in a co-current, fixed bed biomass gasification facility by control system modifications. = Process performance improvement in a co-current, fixed bed biomass gasification facility by control system modifications. Energy Conversion and Management, 104. pp. 135-146. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Mikulić, Iva (2015) Ojačanje dentalnih polimera staklenim vlaknima. = Glass fiber reinforced dental acrylic resin. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Duić, Neven (2015) CFD modelling of biomass combustion in an experimental drop tube furnace. = CFD modelling of biomass combustion in an experimental drop tube furnace. In: Clean Air 2015, 5.-9.7.2015., Lisabon, Portugal.

Mikulčić, Hrvoje and Vujanović, Milan and Duić, Neven (2015) Improving the sustainability of cement production by using numerical simulation of limestone thermal degradation and pulverized coal combustion in a cement calciner. = Improving the sustainability of cement production by using numerical simulation of limestone thermal degradation and pulverized coal combustion in a cement calciner. Journal of Cleaner Production, 88. pp. 262-271. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Mikulčić, Hrvoje and Vujanović, Milan and Wang, Xuebin and Tan, Houzhang and Duić, Neven (2015) Modelling Wooden Biomass Combustion in an Vertical Experimental Furnace. = Modelling Wooden Biomass Combustion in an Vertical Experimental Furnace. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Mikulčić, Hrvoje and Wang, Xuebin and Vujanović, Milan and Tan, Houzhang and Duić, Neven (2015) Mitigation of Climate Change by Reducing Carbon Dioxide Emissions in Cement Industry. = Mitigation of Climate Change by Reducing Carbon Dioxide Emissions in Cement Industry. Chemical engineering transactions, 45. pp. 649-654. ISSN 2283-9216. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.

Milas, Krešimir (2015) Usporedba unaprijednih neuronskih mreža s jednim i dva skrivena sloja u modeliranju linearnog dinamičkog sustava. = Comparison of feedforward neural networks with one and two hidden layers in modeling of linear dynamic system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Miler, Daniel (2015) Utjecaj konstrukcijskih rješenja na naprezanje kućišta jednostupanjskog reduktora. = The impact of the structural changes on the gear unit housing stress. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Milić, Mirta and Leitinger, Gerd and Pavičić, Ivan and Zebić Avdičević, Maja and Dobrović, Slaven and Goessler, Walter and Vinković Vrček, Ivana (2015) Cellular uptake and toxicity effects of silver nanoparticles in mammalian kidney cells. = Cellular uptake and toxicity effects of silver nanoparticles in mammalian kidney cells. JAT. Journal of applied toxicology, 35 (6). pp. 581-592. ISSN 0260-437X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 7.

Milić, Vladimir (2015) Minimaks optimalno upravljanje nelinearnim dinamičkim sustavima. = Minimax optimal control of nonlinear dynamical systems. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.

Milić, Vladimir and Kasać, Josip and Novaković, Branko (2015) An analytical fuzzy-based approach to L2-gain optimal control of input-affine nonlinear systems using Newton-type algorithm. = An analytical fuzzy-based approach to L2-gain optimal control of input-affine nonlinear systems using Newton-type algorithm. International Journal of Systems Science, 46 (13). pp. 2448-2460. ISSN 0020-7721. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Miloš, Darije (2015) Robotski manipulator za velike nosivosti. = Robotic manipulator for large payloads. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Milutinović, Milan and Čorić, Mirko and Deur, Joško (2015) Operating cycle optimization for a Magnus effect-based airborne wind energy system. = Operating cycle optimization for a Magnus effect-based airborne wind energy system. Energy conversion and management, 90. pp. 154-165. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Mirić, Luka (2015) Stroj za mljevenje grožđa. = Grape grinder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Mićanović, Robert (2015) Drvno plastični kompoziti. = Wooden plastic composites. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.

Mićić Hot, Jadranka (2015) Refinements of quasi - arithmetic means inequalities for Hilbert space operators. = Refinements of quasi - arithmetic means inequalities for Hilbert space operators. Banach journal of mathematical analysis, 9 (1). pp. 111-126. ISSN 1735-8787. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Mićić Hot, Jadranka and Pečarić, Josip (2015) On Levinson's operator inequality and its converses. = On Levinson's operator inequality and its converses. Journal of inequalities and applications, 2015 (127). pp. 1-15. ISSN 1029-242X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Mićić Hot, Jadranka and Praljak, Marjan and Pečarić, Josip (2015) Levinson's inequality for Hilbert space operators. = Levinson's inequality for Hilbert space operators. Journal of Mathematical Inequalities, 9 (4). pp. 1271-1285. ISSN 1846-579X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Mišković, Darko (2015) Regulacija varijabilnog pogona termoenergetskog bloka. = Variable operation control of thermal power plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Mišura, Ivan (2015) Izrada kompozitne tvorevine postupkom LRTM. = Production of composite product with LRTM. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.

Mladineo, Tonko (2015) Numerička analiza prijelaza topline u ispušnom kućištu plinske turbine. = Numerical analysis of heat transfer in the gas turbine exhaust hausing. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Mlinarić, Marko (2015) Konstrukcija 4-osne NU glodalice za obradu polimernih pjena. = Construction of 4-axis CNC milling machine for machining of polymer foams. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Motalleb, Miri and Đukić, Ankica and Firak, Mihajlo (2015) Solar hydrogen power system for isolated passive house. = Solar hydrogen power system for isolated passive house. International journal of hydrogen energy, 40 (46). pp. 16001-16009. ISSN 0360-3199. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 3.

Močibov, Petra (2015) Razvoj rješenja za rukovanje i oblikovanje žičanih snopova. = Development of a solution for handling and forming of wire bundles. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Mudrinić, Ivan (2015) Statističke metode u procjeni minimalne energije paljenja zapaljivih prašina. = Statistical methods for estimation of minimal ignition energy of combustible dusts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Mudronja, Luka and Vidan, Pero and Parunov, Joško (2015) Review of seakeeping criteria for container ship sustainable speed calculation in rough weather. = Review of seakeeping criteria for container ship sustainable speed calculation in rough weather. In: MARTECH 2014 Maritime Technology and Engineering, 15-17.10.2014., Lisabon, Portugal.

Mudronja, Vedran and Runje, Biserka and Baršić, Gorana and Katić, Marko and Šimunović, Vedran (2015) Postignuća Hrvatskog nacionalnog laboratorija za duljinu. = In: 15. Hrvatska konferencija o kvaliteti i 6. znanstveni skup Hrvatskog društva za kvalitetu, 07-09.05.2015., Primošten, Croatia.

Mudronja, Vedran and Šimunović, Vedran and Ački, Bojan and Matus, Michael and Bánréti, Edit and István, Dicso and Thalmann, Rudolf and Lassila, Antti and Lillepea, Lauri and Picotto, Gian Bartolo and Bellotti, Roberto and Pometto, Marco and Ganioglu, Okhan and Meral, Ilker and Salgado, José Antonio and Vailleau, Georges (2015) Final report on EURAMET.L-S21: "Supplementary comparison of parallel thread gauges". = Final report on EURAMET.L-S21: "Supplementary comparison of parallel thread gauges". Metrologia, 52 (1A). ISSN 0026-1394. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 16.

Mulc, Tihomir and Udiljak, Toma and Ciglar, Damir (2015) Structure of Reconfigurable Manufacturing Systems. = Structure of Reconfigurable Manufacturing Systems. In: DAAAM International Scientific Book 2015. Vol. 14 . DAAAM International Vienna, Vienna, pp. 369-390. ISBN 978-3-902734-05-1

Murat, Zrinka (2015) Utjecaj parametara aktivacijskih funkcija na odziv RBF neuronske mreže. = The influence of activation function parameters on the performance of RBF neural network. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.

Mustafić, Haris (2015) Kinetika aluminiziranja titanovih legura. = Kinetics of aluminizing of titanium alloys. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

N

Naglić, Matija (2015) Konstrukcija stabilnijeg kompaktnog cestovnog vozila na pogon snagom kotača. = Design of a more stable compact road vehicle powered by driver abilities. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.

Nikolić, Boris (2015) Utjecaj koordinatnog sustava predmeta mjerenja na razinu točnosti mjernog robota. = Influence of part coordinate system on accuracy of measuring robot. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.

Ninić, Ante (2015) Utjecaj vrste uljevnog sustava na kvalitetu lijevane aluminijske ploče. = Effect of gating design on the quality of cast aluminium plate. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Nižetić, Sandro and Duić, Neven and Papadopulos, A.M. and Tina, G.M. and Grubišić-Čabo, F. (2015) Energy efficiency evaluation of a hybrid energy system for building applications in a Mediterranean climate and its feasibility aspect. = Energy efficiency evaluation of a hybrid energy system for building applications in a Mediterranean climate and its feasibility aspect. Energy (Oxford), 90. pp. 1171-1179. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Nižić, Joško (2015) Kaskadni rashladni sustav CO2/R134a. = Cascade refrigation system CO2/R134a. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Novak, Marko (2015) Utjecaj oblika uljevnog sustava na kvalitetu odljevka od sivog lijeva. = Effect of gating design on the quality of grey iron casting. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.

Novak, Matija (2015) Numeričko optimiranje krutosti konstrukcije. = Numerical optimization of the structure stiffness. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.

Novaković, Branko (2015) Is positive gravitational force source of dark energy? = Is positive gravitational force source of dark energy? International Journal of New Technology and Research (IJNTR), 1 (7). pp. 6-13. ISSN 2454-4116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Novaković, Branko (2015) Relativistic Alpha Field Theory – Part I: determination of field parameters. = Relativistic Alpha Field Theory – Part I: determination of field parameters. International Journal of New Technology and Research (IJNTR), 1 (5). pp. 23-30. ISSN 2454-4116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Novaković, Branko (2015) Relativistic Alpha Field Theory – Part II: Does a gravitational field could be without singularity? = Relativistic Alpha Field Theory – Part II: Does a gravitational field could be without singularity? International Journal of New Technology and Research (IJNTR), 1 (5). pp. 31-38. ISSN 2454-4116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Novaković, Branko (2015) Relativistic Alpha Field Theory – Part III: Does gravitational force becomes positive if (GM/rc2) > 1? = Relativistic Alpha Field Theory – Part III: Does gravitational force becomes positive if (GM/rc2) > 1? International Journal of New Technology and Research (IJNTR), 1 (5). pp. 39-47. ISSN 2454-4116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.

Novosel, Dean (2015) Analiza materijala valjaka za mjerenje kočne sile. = Materials analysis of rollers for measuring break force. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Novosel, Tomislav and Ban, Marko and Duić, Neven and Markovska, Nataša and Borozan, Vesna and Pukšec, Tomislav and Tomić, Tihomir and Krajačić, Goran (2015) Influence of district heating on future energy systems: Case study for the heat demand mapping and energy planning of the City of Osijek. = Influence of district heating on future energy systems: Case study for the heat demand mapping and energy planning of the City of Osijek. In: 17th Symposium on Thermal Science and Engineering of Serbia, 20-23.10.2015., Sokobanja, Serbia.

Novosel, Tomislav and Dedinec, Aleksandar and Ćosić, Boris and Markovska, Nataša and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven (2015) Role of district heating in energy systems with a high share of renewables – A case study for the country of Macedonia. = Role of district heating in energy systems with a high share of renewables – A case study for the country of Macedonia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Novosel, Tomislav and Duić, Neven (2015) Centralizirani sustavi grijanja i hlađenja. = District heating and cooling systems. SUMA, 3. pp. 50-52. ISSN 1848-8129. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Novosel, Tomislav and Perković, Luka and Ban, Marko and Keko, Hrvoje and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven (2015) Agent based modelling and energy planning – Utilization of MATSim for transport energy demand modelling. = Agent based modelling and energy planning – Utilization of MATSim for transport energy demand modelling. Energy (Oxford), 92 (3). pp. 466-475. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 7.

Novosel, Tomislav and Ćosić, Boris and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven and Mathiesen, Brian Vad and Lund, Henrik and Mustafa, Manal (2015) Integration of renewables and reverse osmosis desalination – Case study for the Jordanian energy system with a high share of wind and photovoltaics. = Integration of renewables and reverse osmosis desalination – Case study for the Jordanian energy system with a high share of wind and photovoltaics. Energy (Oxford), 92 (3). pp. 270-278. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 8.

Novotni, Davor (2015) Medicinsko vozilo velikog kapaciteta. = Mass casualty incident vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Nujić, Dominik (2015) Naprava za montažu Al okvira. = Aluminium frame mounting device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

O

Obradović, Ana (2015) Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine. = Analysis of deformation processes of gas turbine exhaust housing parts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Obućina, Matej (2015) Projekt klimatizacije poliklinike za rehabilitaciju. = Design of air-conditioning system for polyclinic for rehabilitation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Oletić, Alen (2015) Simulacija proizvodnih sustava. = Simulation of manufacturing systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Opalić, Milan and Žeželj, Dragan and Vučković, Krešimir (2015) A new method for description of the pitting process on worm wheels propagation. = A new method for description of the pitting process on worm wheels propagation. Wear, 332-33. pp. 1145-1150. ISSN 0043-1648. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Opetuk, Tihomir and Tošić, Marina and Đukić, Goran and Šolaja, Julio (2015) Cost Justification of Movable Rack Storage System - A Case Study. = Cost Justification of Movable Rack Storage System - A Case Study. Annals of Faculty Engineering Hunedoara, 13 (1). pp. 145-150. . Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Osmakčić, Josip (2015) Ovjesni mosni granik. = Underslung crane. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Osman, Krešimir and Štorga, Mario and Marjanović, Dorian (2015) An Algorithm for Behaviour Prediction of Complex Technical Systems. = An Algorithm for Behaviour Prediction of Complex Technical Systems. In: International Conference on Engineering Design (ICED 2015), 27.- 30.07.2015., Milano, Italija.

Osman, Zoran (2015) Projekt bioplinskog postrojenja. = Project of biogas plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.

Osmanlić, Alen (2015) Uređaj za umjeravanje mjerila momenta sile. = Torque gauge calibration device. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

P

Pajan, Matija (2015) Ispitivanje otpornosti na toplinski umor alatnog čelika za topli rad. = Thermal fatigue testing of hot work tool steel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Palaversa, Marin (2015) Unapređenje grednog konačnog elementa za analizu brodske konstrukcije. = Improvement of beam finite element for ship structural analysis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Prebeg, Pero.

Palfi, Vedran (2015) Karakterizacija strukture materijala kočionog diska. = Characterisation of brake disc microstructure. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Pamuković, Frane and Golemović, Mirna and Novoselac, Jurjana and Golubić Čepulić, Branka and Zlopaša, Gordan and Kodvanj, Janoš (2015) Experimental Measurement of Mechanical Properties of Human Umbilical Vein. = Experimental Measurement of Mechanical Properties of Human Umbilical Vein. In: 24th Congress of the European Association of Tissue Banks, 1-3.10.2015., Split, Hrvatska.

Pandilov, Zoran and Milecki, Andrzej and Nowak, Amadeusz and Górski, Filip and Grajewski, Damian and Ciglar, Damir and Mulc, Tihomir and Klaić, Miho (2015) Virtual Modelling and Simulation of a CNC Machine Feed Drive System. = Virtual Modelling and Simulation of a CNC Machine Feed Drive System. Transactions of FAMENA, 39-4. pp. 37-54. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 8.

Pandža, Viktor (2015) Numerička integracija rotacijskih kvaterniona. = Numerical integration of rotational quaternions. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Terze, Zdravko.

Papec, Marko (2015) Usporedba postupaka naštrcavanja APS i HVOF. = Comparison of APS and HVOF thermal spraying. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Pappo, Antonio (2015) Hlapljivi inhibitori korozije. = Volatile corrosion inhibitors. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Parunov, Joško and Andrić, Jerolim and Ćorak, Maro and Kitarović, Stanislav (2015) Structural reliability assessment of container ship at the time of accident. = Structural reliability assessment of container ship at the time of accident. Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, 229 (2). pp. 111-123. ISSN 1475-0902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 4.

Parunov, Joško and Ćorak, Maro (2015) Design charts for quick estimation of wave loads on damaged oil tanker in the Adriatic Sea. = Design charts for quick estimation of wave loads on damaged oil tanker in the Adriatic Sea. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015 - Towards Green Marine Technology and Transport, 21.-24.9.2015., Pula, Hrvatska.

Parunov, Joško and Ćorak, Maro and Gledić, Ivana (2015) Comparison of two practical methods for seakeeping assessment of damaged ships. = Comparison of two practical methods for seakeeping assessment of damaged ships. In: 5th International Conference on Marine Structures (MARSTRUCT), 25.-27.03.2015., Southampton, UK.

Pasanec, Josip and Ferdelji, Nenad (2015) Spiralni izmjenjivači topline u kompaktnim parnim toplinskim stanicama. = Helical Heat Exchangers in Compact District Heating Substations. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Pavić, Marko (2015) Materijali alata za izradu staklene ambalaže. = Tool materials for production of glass packaging. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Pavković, Danijel and Komljenović, Ante and Hrgetić, Mario and Krznar, Matija (2015) Experimental characterization and development of a SoC/SoH estimator for a LiFePO4 battery cell. = Experimental characterization and development of a SoC/SoH estimator for a LiFePO4 battery cell. In: International Conference on Computer as a Tool, IEEE EUROCON 2015, 08-11.09.2015., Salamanca, Španjolska.

Pavković, Danijel and Komljenović, Ante and Hrgetić, Mario and Petrić, Joško and Smetko, Viktor (2015) Design of EKF-based SoC estimator for an ultracapacitor module. = Design of EKF-based SoC estimator for an ultracapacitor module. In: International Conference on Computer as a Tool, IEEE EUROCON 2015, 08-11.09.2015., Salamanca, Španjolska.

Pavković, Neven and Martinec, Tomislav (2015) E8723_VISINEV_A37_A38_D44_D45_D46 Management and Visualisation of Relationships Between Engineering Objects. = E8723_VISINEV_A37_A38_D44_D45_D46 Management and Visualisation of Relationships Between Engineering Objects. UNSPECIFIED.

Pavković, Neven and Martinec, Tomislav and Rohde, Danijel and Šikić, Bruno (2015) Management and Visualization of Relationships Between Engineering Objects. = Management and Visualization of Relationships Between Engineering Objects. In: International Conference on Engineering Design (ICED 2015), 27.-31.07.2015., Milan, Italija.

Pavlic, Tomislav and Lukas, Marin and Crneković, Mladen (2015) Design and control of robotic arm for educational mobile robot. = Design and control of robotic arm for educational mobile robot. In: 15th International Scientific Conference on Production Engineering, 10-13.06.2015., Vodice, Hrvatska.

Pavlica, Nikola (2015) Fotodegradacija biorazgradivog polimera PLA. = Photodegradation of the biodegradable polymer PLA. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Pavlinek, Luka (2015) Sadašnje stanje i nadolazeći trendovi tržišta električne energije u Hrvatskoj s posebnim osvrtom na obnovljive izvore energije. = Current state and future trends of electricity markets in Croatia with special emphasis on renewable energy sources. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Pašalić, Ivan (2015) Analiza protoka vertikalnih podiznih modula. = Throughput analysis of vertical lift modules. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Pašić, Aleksandar (2015) Utjecaj razmaka između vodećeg i pratećeg automobila na koeficijente aerodinamičkih sila. = The influence of the distance between leading and trailing car on aerodynamic coefficients. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Džijan, Ivo.

Pažanin, Ivan (2015) Stroj za cijepanje ogrjevnog drva. = Splitter for firewood. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Pažur, Marko (2015) Oblikovanje automatskog sustava za sklapanje i rasklapanje proizvoda. = Design of an automatic system for assembling and disassembling of products. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Penđer, Antonia (2015) Humanoidni robot u interakciji s okolinom. = Humanoid robot in interaction with a man. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Peran, Toni (2015) Mobilni robot s rotacijskim daljinomjerom. = Mobile robot with rotating rangefinder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Perevertaylenko, Oleksandr and Tovazhnyanskyy, Leonid and Boldyryev, Stanislav and Krajačić, Goran and Kapustenko, Petro and Arsenyeva, Olga and Arsenyev, Pavel (2015) Comparison of channels of compact heat exchangers for low-grade heat utilization in industry. = Comparison of channels of compact heat exchangers for low-grade heat utilization in industry. Integrated Technologies and Energy Conservation, 4. pp. 27-34. ISSN 2078-5364. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.

Pereš, Goran (2015) Nerazorna ispitivanja medicinskih implantata. = Non-destructive testing of medical implants. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.

Perić, Jure (2015) Uređaj za odvajanje metalnih iglica s priključaka matičnih ploča osobnih računala. = Device for disassembling metal needles from contact ports of a PC motherboards. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Perić, Marko (2015) Laka prikolica za prijevoz trkaćeg automobila Formula Student. = Light trailer for Formula Student race car. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran and Ormuž, Krunoslav.

Perić, Mato (2015) Numeričko modeliranje zaostalih naprezanja i pukotina u zavarenim konstrukcijama. = Numerical modeling of residual stresses and cracks in welded structures. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Perković, Luka and Priesching, Peter and Bogensperger, Michael and Mikulčić, Hrvoje (2015) Large Eddy Simulation of Turbulent Premixed Combustion of Laboratory-Scaled Flames. = Large Eddy Simulation of Turbulent Premixed Combustion of Laboratory-Scaled Flames. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Petić, Josip (2015) Stroj za kalanje trupaca. = Splitter for logs. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Petljak, Denis (2015) Baza znanja temeljena na ontologijama. = Ontology based knowledge base. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2015) CFD modelling of Diesel spray and combustion using homogenous gas phase reactions within the Euler-Eulerian framework. = CFD modelling of Diesel spray and combustion using homogenous gas phase reactions within the Euler-Eulerian framework. In: 7th European Combustion Meeting (ECM 2015), 30.03.-02.04.2015., Budimpešta, Mađarska.

Petranović, Zvonimir and Vujanović, Milan and Duić, Neven (2015) Towards a more sustainable transport sector by numerically simulating fuel spray and pollutant formation in diesel engines. = Towards a more sustainable transport sector by numerically simulating fuel spray and pollutant formation in diesel engines. Journal of Cleaner Production, 88. pp. 272-279. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Petrovečki, Damir (2015) Primjena metoda Vitkog menadžmenta i Šest Sigme. = Application the Lean menagement and Six Sigma methods. Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Petrović, Filip (2015) Konstrukcija i proračun zavjesnih komada kotla na transformatoru. = Design and strength analysis of power transformer's tank supporting parts. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Pevec, Denis (2015) Proračun čvrstoće stacionarne bušaće platforme. = Strength calculation of stationarz drilling platform. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sorić, Jurica.

Peček, Miljenko (2015) Utjecaj geometrije svrdla i parametara obrade na trošenje oštrice pri bušenju kamena. = Influence of drill geometry and cutting data on tool wear at stone drilling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Pfeifer, Antun (2015) Analiza potencijala proizvodnje biomase iz brzorastućih nasada s neobrađenih poljoprivrednih zemljišta za korištenje u energetskim postrojenjima u Republici Hrvatskoj. = Analysis of biomass production potential from short rotation crops on unused agriculture land for use in biomass power plants in Croatia. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Pfeifer, Antun and Dominković, Dominik Franjo and Ćosić, Boris (2015) Economic potential of biomass from unused agriculture land for energy use: case of Croatia. = Economic potential of biomass from unused agriculture land for energy use: case of Croatia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Pfeifer, Antun and Gašparović, Goran and Krajačić, Goran (2015) Integration of transport and renewable energy sectors in 100% renewable islands communities - Case study Lastovo. = Integration of transport and renewable energy sectors in 100% renewable islands communities - Case study Lastovo. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES Conference, Dubrovnik 2015, 27.09.-02.10.2015., Hrvatska.

Piha, Karlo (2015) Trošenje reznih ploča za beton. = Wear of cutting wheels for concrete. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Pikelj, Tomislav (2015) Operativne značajke dvostruko oplaštenih bazičnih elektroda. = Operatinac characteristic of double-coated basic electrodes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Piljek, Denis (2015) Projekt rashladnog postrojenja za hlađenje proizvodnog pogona tvornice obuće. = Design of cooling system for air conditioning of shoes factory. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.

Piljić, Vedran (2015) Projektno rješenje sustava grijanja, hlađenja i ventilacije supermarketa. = Design solution of heating,cooling and ventilation system for supermarket. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Pinculić, Hrvoje (2015) Obrada eksperimentalnih podataka procesa zakaljivanja primjenom osrednjavajućih i interpolacijskih digitalnih filtara. = Quenching process experimental data processing by means of averaging and interpolating digital filters. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zorc, Davor.

Pinturić, Davor (2015) Procjena utjecaja životnog ciklusa proizvoda na okoliš. = Assessing the impact of product life cycle on the environment. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Pirić, Karlo (2015) Reliability analysis method based on determination of the performance function’s PDF using the univariate dimension reduction method. = Reliability analysis method based on determination of the performance function’s PDF using the univariate dimension reduction method. Structural safety, 57. pp. 18-25. ISSN 0167-4730. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). .

Plavec, Stjepan (2015) Konstrukcija i izrada steznog alaza za prstenaste izradke. = Construction and production of clamping tools for ringed workpieces. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Plavšić, Maja (2015) Projektiranje strukture glavnog rebra tankera prema Harmoniziranim propisima (IACS CSR BC&OT). = Structural design of midship section of oil tanker according to Harmonized rules. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Prebeg, Pero.

Plevnik, Andrej (2015) Bioenergana u prehrambenoj industriji. = Bioenergy plant in food processing industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.

Podgajski, Marko (2015) Preinaka osobnog vozila Peugeot 1007 u električno vozilo. = Modification of vehicle Peugeot 1007 into electric vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Polanović, Tihomir (2015) Određivanje prionjivosti i debljine slojeva dobivenih postupkom PACVD. = Determination of adhesion and layer thicknesses obtained by the PACVD method. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Polarecki, Matija (2015) Eksergijska analiza istosmjernih i protusmjernih rekuperatora. = Exergy analysis of parallel and counter flow recuperative heat exchangers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.

Poljak, Božo (2015) Konstrukcija CNC glodalice za obradu drva. = Design of CNC wood milling machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Polović, Filip (2015) Karakterizacija nitriranih i PACVD postupkom prevučenih površinskih slojeva. = Characterization of nitrated and PACVD process coated surface layers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Pongrac, Dario (2015) Utjecaj aktivacijskog premaza na mehanička i korozijska svojstva zavarenog spoja. = Influence of activation flux on mechanical and corrosion properties of weld joint. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Popovac, M. and Reichl, C. and Jasak, Hrvoje and Rusche, H. (2015) RANS turbulence treatment for continuous adjoint optimization. = RANS turbulence treatment for continuous adjoint optimization. In: 8th International Symposium on Turbulence, Heat and Mass Transfer, 15-18.09.2015., Sarajevo, Bosna i Hercegovina.

Popović, Ivan (2015) Usporedba plinskog i uljnog etalonskog tlačnog sustava do 7 MPa. = Comparison of gas and oil standard pressure system up to 7 MPa. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Popović, Marko (2015) Skladištenje i transport prirodnog plina i naftnih plinova u spremnicima. = Storage and transport of natural gas and petroleum gases in the tanks. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Popčević, Josip (2015) Kemijsko čišćenje zavarenih spojeva nehrđajućih čelika. = Chemical cleaning of stainless steel welds. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Požega, Matej (2015) Stroj za četkanje gomolja. = Tubers brushing device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Požgaj, Vedran (2015) Utjecaj zaštitnog plina na MAG zavarivanje austenitnih čelika. = Influence of the shielding gas on MAG welding of austenitic steel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Primorac, Ivan (2015) Jarosit kao punilo za kompozite na bazi poliesterske smole. = Jarosite as filler for composite based on polyester resin. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.

Pros, Dino (2015) Materijali za izradu motocikala. = Materials for building motorcycles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Protić, Tanja (2015) Uporaba metoda operacijskih istraživanja u uslužnom sektoru. = The use of operations research methods in service industries. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Hrvoje.

Prpić-Oršić, Jasna and Faltinsen, Odd Magnus and Parunov, Joško (2015) The effect of voluntary speed reduction criteria on attainable ship speed. = The effect of voluntary speed reduction criteria on attainable ship speed. In: 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015 - Towards Green Marine Technology and Transport, 21.-24.09.2015., Pula, Hrvatska.

Pršir, Matija (2015) Razvoj pakovanja za hranu i konstruiranje odgovarajućeg kalupa za injekcijsko prešanje. = Development of food packaging and design of appropriate mould injection moulding. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Pukšec, Tomislav (2015) Dugoročno planiranje energetske potrošnje ovisno o energetskoj politici. = Influence of energy policy on long term energy demand planning. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.

Punčec, Tomislav (2015) Stroj za hladno prešanje. = Oil press ford cold pressing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Pustaić, Dragan and Pustaić, Maja (2015) Torsion of a Circular Cross Section Shaft in the Steady-State Creep Conditions. = Torsion of a Circular Cross Section Shaft in the Steady-State Creep Conditions. In: The 8th International Congress of Croatian Society of Mechanics - 8th ICCSM, 29.09.-02.10.2015., Opatija, Hrvatska.

Putak Ivić, Domagoj (2015) Primjena Al kompozita za jarbole. = Application of Al composites for masts. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.

Putar, Filip and Lesičar, Tomislav and Sorić, Jurica and Tonković, Zdenko (2015) Damage modeling using higher-order finite element formulation. = Damage modeling using higher-order finite element formulation. In: 8th International Congress of Croatian Society of Mechanics, 29.09. - 02.10.2015., Opatija, Hrvatska.

Puče, Andro (2015) Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev. = Optimization of parameters in resistance projection welding of wire-tube assembly. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

R

Radanić, Davor (2015) Utjecaj parametara niskobudžetnog 3D printanja na prionjivost modela na radnu podlogu. = Influence of low budget 3D printing parameters on model adhesiveness on working platform. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Radić, Josip Marin (2015) Rekonstrukcija specijalnog alatnog stroja u velikoserijskoj proizvodnji odvijača. = Retrofitting of special machine tool for mass production of screw drivers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Radić, Mateja (2015) Matematički model Medupi elektrane, Južnoafrička Republika. = Mathematical model uf Medupi power plant, South Africa. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.

Radman, Željko (2015) Trošenje kotača tračničkih vozila. = Wear of rail vehicle wheels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Radonić, Luka (2015) Materijali za izradu veslačkog čamca. = Rowing boat materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Radočaj, Danijel and Jurica, Maja and Kos, Sebastijan and Pavlic, Tomislav (2015) Programiranje industrijskih robota za potrebe robotiziranog zavarivanja. = Programming of industrial robots for needs of robotic welding. In: 8. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SB 2015. “ SUVREMENI PROIZVODNI POSTUPCI, OPREMA I MATERIJALI ZA ZAVARENE KONSTRUKCIJE I PROIZVODE”, 21.-23.10.2015., Slavonski Brod, Hrvatska.

Raos, Pero and Stojšić, Josip and Šercer, Mladen and Pilipović, Ana (2015) Effects of compounding conditions on flexural properties of polyamide 12 / clay nanocomposites. = Effects of compounding conditions on flexural properties of polyamide 12 / clay nanocomposites. In: International Conference on Innovative Technologies (IN-TECH 2015), Dubrovnik, Hrvatska.

Rastija, Marko (2015) Stropna podizna konstrukcija koša za košarku. = Hoist-up ceiling construction for basketball. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Ratajec, Mihovil (2015) Sistematizacija ispitnih metoda za određivanje zavarljivosti. = Sistematization of testing procedures for determination of weldability. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Ratković, Igor (2015) Upravljanje i nadzor regulacijskih objekata pomoću lokalnog i nadređenog mikrokontrolera. = Control and supervision of control objects by means of local and superimposed microcontrollers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zorc, Davor.

Rauch, Martina and Galović, Antun and Virag, Zdravko (2015) Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency. = Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Rašić, Marko (2015) Primjena kontrolnih karata za podatke s trendom. = Use of control charts for trending data. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.

Rešetar, Marko (2015) Prikupljanje podataka o korištenju vozila putem EOBD utičnice. = Data acquisition on vehicle usage via EOBD connector. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Ribičić, Matko (2015) Modeliranje atmosferskog graničnog sloja u klimatskom zračnom tunelu. = Atmospheric boundary layer modeling in the climatic wind tunnel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje and Pospišil, Stanislav.

Righi, Boris (2015) Proračun naprezanja poprečnih ramena i spone za uzdužno vođenje stražnjeg ovjesa bolida Formule Student FSB RT04. = Stress calculation of rear suspension wishbones and tie rod of the Formula Student FSB RT04 race car. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.

Rodinger, Tomislav (2015) Toplinsko-mehanička analiza utjecaja nanočestica TiO2 na otpornost i stabilnost nanokompozita na bazi poliestera. = Thermo-mechanical analysis of the effect of TiO2 nanoparticles on resistance and stability of polyester based nanocomposites. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Rodić, Alan (2015) Pristup modelskom prediktivnom upravljanju KGH sustavima u zgradama. = Approach to model predictive control of HVAC in buildings. In: 23. međunarodni simpozij o grijanju, hlađenju i klimatizaciji = 23rd international symposium on heating, refrigerating and air conditioning, 23.04.2015., Zagreb; Croatia.

Rohde, Danijel and Štorga, Mario and Marjanović, Dorian (2015) Design Rationale Capturing Model During Embodiment Phase of the Product Design. = Design Rationale Capturing Model During Embodiment Phase of the Product Design. Transactions of FAMENA, 39 (1). pp. 27-42. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Rohlik, Petar (2015) Mikro hidroelektrana. = Micro hydropower plant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir.

Romić, Darjan (2015) Proračun konstrukcije roštilja dvodna broda za rasuti teret u konceptualnoj fazi projekta. = Structural calculation of double bottom grillage of bulk carriers ships in conceptual design stage. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Romić, Nikola (2015) Određivanje ogrjevnih vrijednosti kapljevitih i krutih goriva pomoću adijabatskog kalorimetra. = Determination of calorific values of liquid and solid fuels by means of the adiabatic calorimeter. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Rončević, Vice (2015) Analiza mikrostrukture i mikrotvrdoće sustava podloga/površinski sloj. = Analysis of the microstructure and microhardness of base/surface layer system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.

Ropuš, Ivana and Carcia, Gianluca and Giorcelli, Mauro and Tagliaferro, Alberto and Haramina, Tatjana and Ćurković, Lidija (2015) Mechanical Properties of Epoxy / Multi - Walled Carbon Nanotubes Composites. = Mechanical Properties of Epoxy / Multi - Walled Carbon Nanotubes Composites. In: 26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2015, 10-21.10.2015., Zadar, Hrvatska.

Rozing, Goran and Alar, Vesna and Marušić, Vlatko (2015) Study of stainless steel resistance in conditions of tribocorrosion wear. = Study of stainless steel resistance in conditions of tribocorrosion wear. Interdisciplinary description of complex systems, 13(3). pp. 461-471. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Rožman, Filip (2015) Analiza polijetanja male radio-upravljane letjelice. = Take-off analysis for small radio-controlled aircraft. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.

Rujnić-Sokele, Maja and Šercer, Mladen (2015) Biodegradable Plastics – Challenges and Opportunities. = Biodegradable Plastics – Challenges and Opportunities. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, Dubrovnik, Hrvatska.

Runje, Biserka and Horvatić Novak, Amalija and Stepanić, Josip and Mihaljević, Morana (2015) Predložena revizija Vodiča za iskazivanje mjerne nesigurnosti. = Proposed revision of the Guide to the expression of uncertainty in measurement. In: 11th International Conference Laboratory Competence 2015, 21-24.10.2015., Zadar, Hrvatska.

Runje, Biserka and Krstić, Vukelja and Horvatić Novak, Amalija (2015) Comparison of different simulations methods in case of service-providing companies. = Comparison of different simulations methods in case of service-providing companies. Interdisciplinary description of complex systems, 13 (3). pp. 472-478. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Runje, Biserka and Krstić Vukelja, Elizabeta and Stepanić, Josip (2015) Simulacija mjerenja kvalitete usluge primjenom modeliranja pomoću agenata. = Agent-Based Simulation of Measuring the Quality of Services. Tehnički vjesnik – Technical Gazette: Scientific professional Journal of technical faculties of the Josip Juraj Strossmayer University of Osijek., 22 (6). pp. 1561-1566. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Rupčić, David (2015) Priključni sustav autonomnog punjenja baterija mobilnog robota. = Docking station for autonomous mobile robot recharging. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

S

Santo, Monika (2015) Analiza dinamičke metode proračuna potrebne toplinske energije zgrade. = Analysis of dynamic calculation method of thermal energy needs for buildings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Satinović, Antonio (2015) Analiza pucanja zavarenih spojeva aluminijskih okvira za bicikle. = Analysis of weld failure on aluminium bicycle frame. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Schneider, Daniel Rolph and Ragossnig, Arne (2015) Recycling and incineration, contradiction or coexistence? = Recycling and incineration, contradiction or coexistence? Waste Management and Research, 33 (8). pp. 693-695. ISSN 0734-242X. Vrsta rada: Editorial. . Točan broj autora: 2.

Sedić, Almir and Pavković, Danijel and Firak, Mihajlo (2015) A methodology for normal distribution-based statistical characterization of long-term insolation by means of historical data. = A methodology for normal distribution-based statistical characterization of long-term insolation by means of historical data. Solar energy, 122. pp. 440-454. ISSN 0038-092X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Segurado, Raquel and Costa, Mário and Duić, Neven and Da Graça Carvalho, Maria (2015) Integrated analysis of energy and water supply in islands. Case study of S. Vicente, Cape Verde. = Integrated analysis of energy and water supply in islands. Case study of S. Vicente, Cape Verde. Energy, 92. pp. 639-648. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4. (In Press)

Seleš, Karlo (2015) Analiza rezidualnih naprezanja u ispušnom kućištu plinske turbine. = Residual stress analysis in gas turbine exhaust housing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Semper, Matija (2015) Sinteza PID regulatora za procese s integracijskim djelovanjem i izraženim mrtvim vremenom. = PID controler design for processes characterized by integral behavior and emphasized dead-time. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.

Senjanović, Ivo and Tomić, Marko and Vladimir, Nikola (2015) An advanced procedure for hydroelastic analysis of very large floating airport exposed to airplane load. = An advanced procedure for hydroelastic analysis of very large floating airport exposed to airplane load. In: 7th International Conference on Hydroelasticity in Marine Technology, 16-19.09.2015., Split, Hrvatska.

Senjanović, Ivo and Tomić, Marko and Vladimir, Nikola and Hadžić, Neven (2015) An approximate analytical procedure for natural vibration analysis of free rectangular plates. = An approximate analytical procedure for natural vibration analysis of free rectangular plates. Thin-walled structures, 95. pp. 101-114. ISSN 0263-8231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung (2015) A new finite element formulation for vibration analysis of thick plates. = A new finite element formulation for vibration analysis of thick plates. International Journal of Naval Architecture and Ocean Engineering, 7 (2). pp. 324-345. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 3.

Senjanović, Ivo and Vladimir, Nikola and Cho, Dae Seung and Jokić, Marko and Choi, Tae Muk (2015) Comparative analysis of new shear locking-free finite element with other commonly used approaches in vibration analysis of Mindlin plates. = Comparative analysis of new shear locking-free finite element with other commonly used approaches in vibration analysis of Mindlin plates. In: 1st Pan-American Congress on Computational Mechanics – PANACM 2015, XI Argentine Congress on Computational Mechanics – MECOM 2015, 27-29.04.2015., Buenos Aires, Argentina.

Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko and Hadžić, Neven (2015) Timoshenko beam theory 93 years later - over bridges to nanotubes and ultra large ships. = Timoshenko beam theory 93 years later - over bridges to nanotubes and ultra large ships. Rad Hrvatske akademije znanosti i umjetnosti. Tehničke znanosti, 521 (17). pp. 1-49. ISSN 1330-0822. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Shuanghui, Deng and Xuebin, Wang and Houzhang, Tan and Mikulčić, Hrvoje and Zhifeng, Li and Ruijie, Cao and Zhao, Wang and Vujanović, Milan (2015) Experimental and modeling study of the long cylindrical oily sludge drying process. = Experimental and modeling study of the long cylindrical oily sludge drying process. Applied thermal engineering, 91. pp. 354-362. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 8.

Singer, Sanja and Novaković, Vedran and Singer, Saša (2015) Blocking and parallelization of the Hari-Zimmermann variant of the Falk - Langemeyer algorithm for the generalized SVD. = Blocking and parallelization of the Hari-Zimmermann variant of the Falk - Langemeyer algorithm for the generalized SVD. Parallel computing, 49. pp. 136-152. ISSN 0167-8191. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Sjerić, Momir and Kozarac, Darko and Taritaš, Ivan (2015) Modelling of Cyclic Variability in Combustion of Spark-Ignition Engine Using the Cycle- Simulation Model. = Modelling of Cyclic Variability in Combustion of Spark-Ignition Engine Using the Cycle- Simulation Model. In: AVL Advanced Simulation Technologies International User Conference 2015, 23.-25.06.2015., Graz, Austrija.

Sjerić, Momir and Kozarac, Darko and Tatschl, Reinhard (2015) Modelling of Early Flame Kernel Growth Towards A Better Understanding of Cyclic Combustion Variability in SI Engines. = Modelling of Early Flame Kernel Growth Towards A Better Understanding of Cyclic Combustion Variability in SI Engines. Energy conversion and management, 103. pp. 895-909. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Skendrović, Viktorija (2015) Projektiranje i konstruiranje samoposlužnog uređaja. = Design and construction of vending machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Skozrit, Ivica and Frančeski, Joško and Tonković, Zdenko and Surjak, Martin and Krstulović-Opara, Lovre and Vesenjak, Matej and Kodvanj, Janoš and Gunjević, Bojan and Lončarić, Damir (2015) Validation of numerical model by means of digital image correlation and thermography. = Validation of numerical model by means of digital image correlation and thermography. In: 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, VAL2015, 23-26.03.2015., Prague, Czech Republic.

Skozrit, Ivica and Tonković, Zdenko and Krstulović- Opara, Lovre and Surjak, Martin and Vesenjak, Matej and Čanžar, Predrag and Sorić, Jurica (2015) Damage Initiation and Evolution in Nodular Cast Iron for Wind Turbine Components. = Damage Initiation and Evolution in Nodular Cast Iron for Wind Turbine Components. In: 8th International Congress of Croatian Society of Mechanics, 29.09.-02.10.2015., Opatija, Croatia.

Skroče, Stipe (2015) Analiza signala akustične emisije i vibracija u postupcima bušenja. = Acoustic emission and vibrations signal analysis in drilling processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.

Slamek, Antonio (2015) Primjena alata vitkog menadžmenta pri izmjeni alata. = Aplication of Lean management tools for change over process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Slaninka, Tomislav (2015) Uređaj za odmatanje i rezanje sijena iz bale. = Hay bundle unrolling and cutting device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.

Slunjski, Mihael (2015) Matematički model plinske turbine TE Sisak. = Gas turbine mathematical model of CCCGT power plant Sisak. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Smolec, Marko (2015) Bušenje nehomogenih materijala pomoću robota. = Robotic drilling of inhomogeneous materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Sokele, Dunja (2015) Procjena isplativosti investiranja u osuvremenjavanje alatnih strojeva. = A feasibility study of upgrading machine tools. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Soldo, Jure (2015) Modeliranje i regulacija suhe spojke s hidrostatskim aktuatorom. = Modeling and control of dry clutch with hydrostatic actuator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.

Soldo, Vladimir and Lepoša, Leon and Boban, Luka and Borović, Staša (2015) Implementation of the Distributed Thermal Response Test at Characteristic Geological Regions throughout Croatia. = Implementation of the Distributed Thermal Response Test at Characteristic Geological Regions throughout Croatia. In: World Geothermal Congress, 19.-24.09.2015., Melbourne, Australija.

Sorić, Jurica and Hoster, Josip and Jarak, Tomislav and Jalušić, Boris (2015) Mixed Meshless Plate Analysis Using B-Spline Interpolation. = Mixed Meshless Plate Analysis Using B-Spline Interpolation. Transactions of FAMENA, 39 (1). pp. 1-14. ISSN 1333-11243. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Sremić, Dominik (2015) Električni romobil. = Electric scooter. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.

Stanečić, Josip (2015) Usporedba sposobnosti ohlađivanja biljnih i mineralnih ulja za gašenje. = Comparasion of cooling rates of vegetable and mineral oils as quenchants. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Stanić, Maja (2015) Procjena mjerne nesigurnosti u postupku mjerenja ručnim mjerilima duljine. = Manual length measuring instruments-estimation of measurement uncertanty. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stepanić, Josip.

Stanić, Mihael (2015) Analiza tragova trošenja tribo para zub - zubna udlaga. = Analysis of wear tracks of tribo - pair tooth - dental splint. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Stanić, Tomislav (2015) Optimiranje plinskoturbinskog kružnog ciklusa. = Optimization of gas turbine cycle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Stanković, Stefan (2015) Proizvodnja kapljevitih goriva iz ugljena. = The production of liquid fuels from coal. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Staroveški, Mario (2015) Vrste ispuna unutrašnjosti proizvoda načinjenih taložnim očvršćivanjem. = Types of fillings inside the product made by fused deposition modeling. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šercer, Mladen.

Staroveški, Tomislav and Brezak, Danko and Udiljak, Toma (2015) Drill wear monitoring in cortical bone drilling. = Drill wear monitoring in cortical bone drilling. Medical Engineering and Physics, 37 (6). pp. 560-566. ISSN 1350-4533. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 3.

Starčević, Martin (2015) Ocjena primjenjivosti frikcijskih pumpi u ljudskom krvotoku. = Assesment of applicability of friction pumps in human circulatory system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.

Stepanić, Josip and Ćosić Lesičar, Jelena and Posavec, Marko (2015) Detecting irregular dynamics of autonomous robotic systems using information entropy. = Detecting irregular dynamics of autonomous robotic systems using information entropy. In: Mechedu - Mechatronics in Practice and Education, 14-15.05. 2015., Subotica, Srbija.

Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2015) A model of idea evaluation and selection for product innovation. = A model of idea evaluation and selection for product innovation. In: International Conference on Engineering Design 2015 (ICED 2015), 27.-30.07.2015., Milano, Italy.

Stipić, Tomislav (2015) Strukturna analiza i optimizacija teretnog prostora broda za rasuti teret. = Structural analysis and optimization of cargo hold area of bulk carrier. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Stjepić, Ivan (2015) Konstrukcija uređaja za uparivanje soka rajčice. = Design of tomato juice evaporator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Stošić, Jakov (2015) Umjeravanje masa nestandardnih tijela. = Calibration of non-standard mass. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Stošić, Jure (2015) Rashladne komore za hlađenje ribe. = Fish cold stores. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.

Strelar, Mario (2015) Utjecaj UV zračenja na dinamičko-mehanička svojstva etilen/vinil-alkoholnog kopolimera. = Effect of UV radiation on dynamic-mechanical properties of ethylene-vinyl alcohol copolymer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Strusa, Janko (2015) Programski upravljana Wikipedija. = Program controller Wikipedia. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Sumpor, Davor and Taboršak, Dragutin and Jurum-Kipke, Jasna (2015) Anthropometric Measures Important for Control Panel Design in Locomotive or Railcar. = Anthropometric Measures Important for Control Panel Design in Locomotive or Railcar. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (1). pp. 1-10. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Surjak, Martin (2015) Validacija numeričkih modela mehaničkoga ponašanja životinjskih i ljudskih kostiju. = Validation of numerical models of mechanical behavior of animal and human bones. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš and Bobinac, Dragica.

Surma, Robert and Šercer, Mladen and Pilipović, Ana (2015) Designing and production of polymer product with fused deposition modeling – case study. = Designing and production of polymer product with fused deposition modeling – case study. In: 15th International Scientific Conference on Production Engineering, Vodice, Hrvatska.

Svačina, Mario (2015) Vođenje mobilnog robota kroz labirint. = Guidance of mobile robot through the maze. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

T

Tadijanović, Imra (2015) Smanjivanje mase mobilnog manipulatora. = Mass reduction of the mobile manipulator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Tadić, Josip (2015) Ispitivanje kemijske postojanosti PACVD slojeva. = Evaluation od corrosion behavior of the PACVD coated layers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.

Tandarić, Karlo (2015) Metode procjene zavarljivosti čelika visoke čvrstoće. = Weldability assessment methods of high strength steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Tatalović, Vedran (2015) Upravljanje mobilnim robotom s diferencijalnim pogonom i ultrazvučnim senzorima udaljenosti. = Control of mobile robot with differential drive and ultrasonic distance sensors. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.

Tatomir, Niko (2015) Izračun sile otpora i uzgona aero - profila. = Aerofoil lift and drag calculation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Temarel, Pandeli and Bai, Wei and Bruns, Anne and Dhavalikar, S. and Derbanne, Quentine and Dessi, Daniele and Fonseca, Nuno and Gu, Xuekang and Nestegard, A. and Papanikolau, Apostolos and Parunov, Joško and Song, K.H. and Wang, S (2015) Loads. = Loads. In: Proceedings of 19th INTERNATIONAL SHIP AND OFFSHORE STRUCTURES CONGRESS. Taylor, London, pp. 73-140. ISBN 978-1-138-02895-1

Terze, Zdravko and Mueller, Andreas and Zlatar, Dario (2015) An Angular Momentum and Energy Conserving Lie - Group Integration Scheme for Rigid Body Rotational Dynamics Originating from Störmer - Verlet Algorithm. = An Angular Momentum and Energy Conserving Lie - Group Integration Scheme for Rigid Body Rotational Dynamics Originating from Störmer - Verlet Algorithm. ASME Journal of Computational and Nonlinear Dynamics, 10 (5). pp. 1-11. ISSN 1555-1415. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Tirić, Tomislav (2015) Zaštitni plinovi pri tig zavarivanju. = Shielding gases for tig welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Tomašić, Danijel and Ilinčić, Petar and Pilipović, Ana (2015) Influence of layers lay - up on the mechanical properties of hybrid composites in field of aeronautics. = Influence of layers lay - up on the mechanical properties of hybrid composites in field of aeronautics. Polimeri : časopis za plastiku i gumu, 36 (1-2). pp. 5-10. ISSN 0351-1871. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Tomić, Denis (2015) Istraživanje utjecaja glavnih izmjera i oblika pramčanog dijela broda na ukupni otpor. = Investigation of the influence of the main particulars and fore part of the ship on the total resistance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.

Tomić, Ivan (2015) Energijsko - eksergijska analiza pripreme vlažnog zraka. = Energy and exergy analysis of moist air processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.

Tomić, Rudolf (2015) Model detonantnoga izgaranja u Ottovom motoru. = Model of knock phenomenon in spark ignition engine. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Tomić, Tanja and Kožuh, Zoran and Garašić, Ivica and Samardžić, Ivan (2015) Effects of hydrogen upon the properties of thermo mechanical controlled process steel. = Effects of hydrogen upon the properties of thermo mechanical controlled process steel. Metalurgija, 55 (1). pp. 99-102. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Tomić, Tihomir and Ćosić, Boris and Schneider, Daniel Rolph (2015) Economic viability of biomass and MSW-fuelled district heating system: case of the city of Zagreb. = Economic viability of biomass and MSW-fuelled district heating system: case of the city of Zagreb. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Tomičević, Zvonimir (2015) Identifikacija mehaničkih svojstava nodularnog lijeva kod višeosnih opterećenja. = Identification of the mechanical properties of nodular graphite cast iron via multiaxial tests. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, L’ecole normale sup´erieure de Cachan, Laboratorie de mecanique' et technologie, Paris. Mentor: Kodvanj, Janoš and Hild, Francois.

Tongran, Qin and Tuković, Željko and Grigoriev, Roman O. (2015) Buoyancy-thermocapillary convection of volatile fluids under their vapors. = Buoyancy-thermocapillary convection of volatile fluids under their vapors. International journal of heat and mass transfer, 80. pp. 38-49. ISSN 0017-9310. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Topić, Ante (2015) Procjena sposobnosti procesa izrade hidrauličkih cilindara. = Capability estimation of hydraulic cylinders manufacturing process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.

Topić, Jakov (2015) Izvlačenje povezanih podataka iz strojarskih dokumenata s mreže. = Extracting linked open data (LOD) from engineering web documents. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.

Topić, Slavko (2015) Kinetička vodna turbina za malu hidroelektranu. = Kinetic water turbine for small hydropower plant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Guzović, Zvonimir and Tuković, Željko.

Torer, Ivan (2015) Toplinsko naštrcavanje. = Thermal spraying. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Tošić, Marina and Lisjak, Dragutin and Kolar, Davor (2015) Impact of the key performance indicators on a maintenance process: A literature overview. = Impact of the key performance indicators on a maintenance process: A literature overview. In: 5th International Conference on Production Engineering and Management 2015, 01.-02.10.2015., Trieste, Italy.

Tremac, Filip (2015) Simulacija rada solarnog toplovodnog sustava u obiteljskoj kući. = Simulation of solar hot water system work in a family house. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.

Trinc, Ivan (2015) Model estimacije budućih emisija iz cestovnog prometa. = Model for estimating air pollutant emissions from transport. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Trslić, Petar (2015) Upravljanje laganom robotskom rukom pomoću PC računala. = PC-based control of a lightweight robot arm. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Trstenjak, Maja (2015) Podrška odlučivanja pri odabiru alatnih strojeva u investicijskom projektu. = Decission support in selection machine tools during investment project. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.

Trstenjak, Maja and Ćosić, Predrag (2015) Decision support for machine tools selection in process planning and equipment investment. = Decision support for machine tools selection in process planning and equipment investment. In: 25th International Conference on Flexible Automation and Intelligent Manufacturing, 23.-26. srpanj 2015., Wolverhampton, United Kingdom.

Trstenjak, Maja and Ćosić, Predrag (2015) New machines selection tools using analytic hierarchy process. = New machines selection tools using analytic hierarchy process. In: 7th International Scientific Conference Management of Technology - Step to Sustainable Production, MOTSP2015, 10-12 June 2015, Brela, Makarska, Croatia, 10.-12.06.2015., Brela, Makarska, Hrvatska.

Trčak, Andrija (2015) Razvoj polimernog kućišta kartuše posebnog ljepila. = Development of polymer case of special glue container. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Turčić, Ivan (2015) Dvobrzinski mjenjač za električno vozilo. = Two-speed Transmission for an electric vehicle. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.

Tödtling, Marko (2015) Vitki projektni menadžment. = Lean project management. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko and Hegedić, Miro.

U

Ule, Damjan (2015) Materijalna i termička oporaba korištenih ulja za podmazivanje. = Waste engine oils - material and thermal recovery. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.

Uzbašić, Ivan (2015) Projekt demonstracijskog rashladnog uređaja s ugljikovim dioksidom kao radnom tvari. = Design of a laboratory CO2 refrigeration unit for demonstration purposes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.

Uđbinac, Domagoj (2015) Zavarivanje pocinčanih limova. = Welding of zinc coated steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Užarević, Vinko (2015) Regulacija jednofaznog pretvarača snage podržanog zamašnjačkim sustavom za pohranu energije za primjenu u izmjeničnoj mikromreži. = Control of single-phase power converter supported by a flywheel energy storage system for an AC microgrid application. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.

V

Vajdić, Goran (2015) Analiza trošenja zupčanika reduktora vozila pogonjenog na sva četiri kotača. = Wear analysis of reductor gear in vehicles driven on all four wheels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Valjak, Filip (2015) Zapis znanja i podrška komunikaciji u kompleksnom konstrukcijskom projektu. = Knowledge recording and communication support in complex design project. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Vasilj, Andrej (2015) Istraživanje otpora potopljenog dijela jedrilice klase Optimist. = Research of sail-boat Optimist hull resistance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.

Vencl, Ivan (2015) Toplovodni kotao na biomasu. = Hot water boiler burning biomass. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.

Vidak, Josip (2015) Robotizirano TIG zavarivanje. = Robotized TIG welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Vidić, Tomislav (2015) Stroj za izradu peleta. = Pelletting machine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Vinko, Igor (2015) Analiza procesa montaže u strojograđevnoj tvornici. = Analysis of the assembly process in the machinery manufacturing factory. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Virag, Lana and Vindiš, Vedran and Sorić, Jurica and Karšaj, Igor (2015) Implementation of Thrombus-laden Abdominal Aortic Aneurysms into Finite Element Code. = Implementation of Thrombus-laden Abdominal Aortic Aneurysms into Finite Element Code. In: 8th International Congress of Croatian Society of Mechanics, 29.09.-02.10.2015., Opatija, Hrvatska.

Virag, Lana and Wilson, John S. and Humphrey, Jay D. and Karšaj, Igor (2015) A Computational Model of Biochemomechanical Effects of Intraluminal Thrombus on the Enlargement of Abdominal Aortic Aneurysms. = A Computational Model of Biochemomechanical Effects of Intraluminal Thrombus on the Enlargement of Abdominal Aortic Aneurysms. Annals of biomedical engineering, 43 (12). pp. 2852-2867. ISSN 0090-6964. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Višak, Tomica (2015) Utjecaj krutosti konstrukcijskih komponenata na raspodjelu naprezanja u ispušnom kućištu plinske turbine. = Influence of structural components stiffness on stress distribution in gas turbine exhaust housing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.

Vlahović, Marko (2015) Optimizacija parametara TIG zavarivanja aluminijske legure AW 5083. = Optimization of TIG welding parameters for AW 5083 aluminum alloy. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Vojvodić, Andreja Leonela (2015) Analiza značajki signala sila rezanja i jakosti struja pogonskih motora kod bušenja nehomogenih kamena. = Cutting force and motor drve current analysis indriling of inhomogeous stone materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Vrandečić, Tin (2015) Modeliranje peristaltičkog transporta urina u ureter. = Modeling of peristaltic transport of urine through the ureter. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.

Vrandečić, Tin and Horina, Alen and Schneider, Daniel Rolph (2015) Stirling Engine CCHP Plant Fueled by Biomass and Biogas from Biowaste and Waste Water Treatment. = Stirling Engine CCHP Plant Fueled by Biomass and Biogas from Biowaste and Waste Water Treatment. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Vranjić, Nikola (2015) Numerička analiza strujanja fluida i prijelaza topline u ispušnom kućištu plinske turbine. = Numerical analysis of fluid flow and heat transfer in the gas turbine exhaust housing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko and Guzović, Zvonimir.

Vračarić, Marko (2015) Dohvatnik na ručni pogon. = Manually powered boom. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Vrbanec, Robert (2015) Uređaj za uništavanje krivotvorene robe. = Device for the destruction of counterfeit goods. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Vuglač, Tomislav (2015) Konstrukcija i analiza robota paralelne kinematske strukture. = Design and analysis of robot with parallel kinematics structure. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Vuilleumier, David and Taritaš, Ivan and Wolk, Benjamin and Kozarac, Darko and Saxena, Samveg and Dibble, Robert W. (2015) Multi-Level Computational Exploration of Advanced Combustion Engine Operating Strategies. = Multi-Level Computational Exploration of Advanced Combustion Engine Operating Strategies. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.09-02.10.2015., Dubrovnik, Republika Hrvatska.

Vuić, Dario (2015) Analiza utjecaja opterećenja na tvrdoću i lomnu žilavost tvrdog metala. = Analysis of indentation size effect on hardness and fracture toughness of hard metal. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.

Vujanović, Milan and Petranović, Zvonimir (2015) Modelling the spray and combustion processes in diesel engine using coupled Euler-Eulerian and Euler-Lagrangian approach. = Modelling the spray and combustion processes in diesel engine using coupled Euler-Eulerian and Euler-Lagrangian approach. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.09.2015.-02.10.2015., Dubrovnik, Republika Hrvatska.

Vujanović, Milan and Petranović, Zvonimir and Edelbauer, Wilfried and Baleta, Jakov and Duić, Neven (2015) Numerical Modelling of Diesel Spray Using the Eulerian Multiphase Approach. = Numerical Modelling of Diesel Spray Using the Eulerian Multiphase Approach. Energy conversion and management, 104. pp. 160-169. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 5.

Vuk, Tomislav (2015) Razvoj programske aplikacije za upravljanje varijantnim modelom lamelne spojke. = Development of the program application for the management of variant model of the plate clutch. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Vukmirović, Luka (2015) Projekt sustava za umjeravanje atmosferskog tlaka. = Atmospheric pressure calibration system design. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Vukčević, Vuko and Jasak, Hrvoje (2015) Decomposition model for naval hydrodynamic applications, Part II: Verification and validation. = Decomposition model for naval hydrodynamic applications, Part II: Verification and validation. Ocean engineering, 121. pp. 76-88. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.

Vukčević, Vuko and Jasak, Hrvoje (2015) Seakeeping Validation and Verification Using Decomposition Model Based on Embedded Free Surface Method. = Seakeeping Validation and Verification Using Decomposition Model Based on Embedded Free Surface Method. In: Tokyo 2015 A Workshop on CFD in Ship Hydrodynamics, 2.-4.12.2015., Tokyo, Japan.

Vukčević, Vuko and Jasak, Hrvoje and Malenica, Šime (2015) Assessment of Higher–Order Forces on a Vertical Cylinder with Decomposition Model Based on SWENSE Method. = Assessment of Higher–Order Forces on a Vertical Cylinder with Decomposition Model Based on SWENSE Method. In: 18th Numerical Towing Tank Symposium, 28.09.-30.09.2015., Cortona, Italija.

Vukčević, Vuko and Jasak, Hrvoje and Malenica, Šime (2015) Solution and domain decomposition model for marine hydrodynamics: RANS and potential flow coupling. = Solution and domain decomposition model for marine hydrodynamics: RANS and potential flow coupling. In: VI International Conference on Computational Methods in Marine Engineering, 15 -17.06.2015., Rim, Italija.

Vukšić, Svetlana (2015) Primjena 5S alata u proizvodnji. = Applying 5S tool in manufacturing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Vulinović, Antun (2015) Metodičko konstruiranje kalupa za injekcijsko prešanje postolja tabletnog računala. = Methodical design of mould for injection moulding of tablet computer chassis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.

Vurnek, Vjekoslav (2015) Biokompoziti ojačani miskantusom. = Miscanthus reinforced biocomposites. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Vusić, Filip (2015) Primjena EPP postupka pri zavarivanju čelika SA516 Gr70. = Application of saw process in welding of steel SA516 Gr70. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Vučemil, Ante (2015) Razvoj jeftinog 3D printera. = Development of low-cost 3D printer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Vučetić, Ante and Božić, Mladen and Šagi, Goran and Lulić, Zoran (2015) Project BOB - Bicycle on Bus. = Project BOB - Bicycle on Bus. In: The 25th JUMV International Automotive Conference “Science and Motor Vehicles 2015″, 14-15.04.2015., Beograd, Srbija.

Vučetić, Damira (2015) Digitalni priručnik za brodske konstrukcije. = Digital handbook for ship structures. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

W

Wang, Jin and Vujanović, Milan and Baleta, Jakov and Duić, Neven and Guzović, Zvonimir (2015) Effects of surface deposition and droplet injection on film cooling. = Effects of surface deposition and droplet injection on film cooling. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Wang, Xuebin and Xu, Zhaoxia and Wei, Bo and Zhang, Lan and Tan, Houzhang and Yang, Tao and Mikulčić, Hrvoje and Duić, Neven (2015) The ash deposition mechanism in boilers burning Zhundong coal with high contents of sodium and calcium: A study from ash evaporating to condensing. = The ash deposition mechanism in boilers burning Zhundong coal with high contents of sodium and calcium: A study from ash evaporating to condensing. Applied Thermal Engineering, 80. pp. 150-159. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 8.

Wang, Yibin and Tan, Houzhang and Du, Wenzhi and Mikulčić, Hrvoje and Duić, Neven (2015) The investigation on characterization of available salts extracted from three kinds of biomass ashes. = The investigation on characterization of available salts extracted from three kinds of biomass ashes. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2015, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Wang, Yinhe and Luo, Liang and Novaković, Branko and Kasać, Josip (2015) Non-rule based fuzzy approach for adaptive control design of nonlinear systems. = Non-rule based fuzzy approach for adaptive control design of nonlinear systems. Asian Journal of Control, 17 (2). pp. 582-591. ISSN 1561-8625. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 4.

Wolff, Daniel (2015) Numerička analiza toplinskih naprezanja u kućištu plinske mikroturbine. = Numerical analysis of thermal stresses in gas microturbine housing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Z

Zajec, Darko (2015) Komparativna analiza različitih sustava gospodarenja komunalnim otpadom primjenom tehno-ekonomskih i LCA alata. = Comparative analysis of different municipal waste management systems using techno-economic and LCA tools. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.

Zajec, Tihana (2015) Usmjeravanje vozila u distribuciji pekarskih proizvoda. = Vehicle routing in distribution of bakery products. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Zgurić, Mislav (2015) Toplinska obrada zavarenih spojeva. = Heat treatment of welded joints. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.

Zhao, Guoying and Alujević, Neven and Depraetere, Bruno and Pinte, Gregory and Swevers, Jan and Sas, Paul (2015) Experimental study on active structural acoustic control of rotating machinery using rotating piezo-based inertial actuators. = Experimental study on active structural acoustic control of rotating machinery using rotating piezo-based inertial actuators. Journal of sound and vibration, 348. pp. 15-30. ISSN 0022-460X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 6.

Zhao, Guoying and Alujević, Neven and Depraetere, Bruno and Pinte, Gregory and Swevers, Jan and Sas, Paul (2015) A pair of piezo-based rotating inertial actuators for active structural acoustic control of rotating machinery. = A pair of piezo-based rotating inertial actuators for active structural acoustic control of rotating machinery. In: 25th International Conference on Adaptive Structures and Technologies (ICAST 2014), 06.-08.10.2014., The Hague, Nizozemska.

Zhao, Guoying and Alujević, Neven and Depraetere, Bruno and Sas, Paul (2015) Active structural acoustic control of gear-box systems using a pair of piezo-based rotating inertial actuators. = Active structural acoustic control of gear-box systems using a pair of piezo-based rotating inertial actuators. In: 7th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART2015), 03-05.06.2016., Ponta Delgada, S. Miguel Island, Azores.

Zhao, Guoying and Alujević, Neven and Depraetere, Bruno and Sas, Paul (2015) Dynamic analysis and ℋ2 optimisation of a piezo-based tuned vibration absorber. = Dynamic analysis and ℋ2 optimisation of a piezo-based tuned vibration absorber. Journal of intelligent material systems and structures, 26 (15). pp. 1995-2010. ISSN 1045-389X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 4.

Zimak, Antonija (2015) Svojstva samoobnavljajućih polimera. = Properties of self-healing polymers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.

Zimak, Antonija and Pugar, Daniel and Haramina, Tatjana (2015) Toplinski aktivirano samoobnavljanje ionomera nakon balističkog testa - mehanička svojstva. = Mechanical properties of a thermally activated self-healing ionomer after ballistic penetration. Tehnički glasnik, 9 (4). pp. 410-414. ISSN 1848-5588. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Zimak, Antonija and Pugar, Daniel and Haramina, Tatjana (2015) Toplinski aktivirano smoobnavljanje ionomera nakon balističkog testa - mehanička svojstva. = Mechanical properties of a thermally activated self-healing ionomer after ballistic penetration. In: 16th International Conference on Materials, Wear and Recycling MATRIB 2015, 25.-27.06.2015., Vela Luka, Hrvatska.

Zlatar, Dario (2015) Geometrijski integratori za numeričku simulaciju dinamike letjelica. = Geometric integrators for numerical simulation of flight vehicle dynamics. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Terze, Zdravko.

Zoričić, Filip (2015) Proračun steznog sustava limova energetskog transformatora pri savijanju. = Calculation of the clamping system of metal sheets in power transformer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Zoričić, Mate (2015) Indirektni nadzor istrošenosti svrdla kod bušenja kompozitnih materijala. = Indirect tool wear condition monitoring in drilling of composite materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.

Zubić, Alen (2015) Razvoj metoda za podršku sljedivosti automatskim kreiranjem veza između komponenata sklopa. = Conceptual development of traceability methods for the automated creation of component's relations. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.

Zvizdić, Davor and Šestan, Danijel (2015) Zinc-Filled Multi-entrance Fixed Point. = Zinc-Filled Multi-entrance Fixed Point. International journal of thermophysics, 36 (2/3). pp. 336-346. ISSN 0195-928X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 2.

Ć

Ćalušić, Luka (2015) Međulaboratorijska usporedba rezultata umjeravanja mjerila tlaka do 1400 bar. = Interlaboratory comparison of pressure gauges calibration results up to 1400 bar. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.

Ćorak, Maro and Parunov, Joško and Guedes Soares, Carlos (2015) Long-term prediction of combined wave and whipping bending moments of container ships. = Long-term prediction of combined wave and whipping bending moments of container ships. Ships and offshore structures, 10 (1). pp. 4-19. ISSN 1744-5302. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 3.

Ćorak, Maro and Parunov, Joško and Guedes Soares, Carlos (2015) Probabilistic Load Combination Factors of Wave and Whipping Bending Moments. = Probabilistic Load Combination Factors of Wave and Whipping Bending Moments. Journal of ship research, 59 (1). pp. 11-30. ISSN 0022-4502. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 3.

Ćorić, Danko and Begović, Toni and Aleksandrov- Fabijanić, Tamara (2015) Influence of foaming temperature on morfology of metal foams. = Influence of foaming temperature on morfology of metal foams. In: International Conference on Materials, Wear, Recycling, MATRIB 2015 - In Memoriam prof.dr.sc. Gojko Marić, 25-27.06.2015., Vela Luka, Hrvatska.

Ćorić, Danko and Begović, Toni and Aleksandrov- Fabijanić, Tamara (2015) Karakterizacija morfologije metalnih pjena. = Morphology Characterization of Metal Foams. Tehničke glasnik, 9 (3). pp. 285-290. ISSN 1846-6168. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Ćorić, Danko and Sakoman, Matija and Perković, Marko (2015) Transition temperature assesment using different methods. = Transition temperature assesment using different methods. In: International Conference on Materials, Wear, Recycling, MATRIB 2015 - In Memoriam prof.dr.sc. Gojko Marić, 25-27.06.2015., Vela Luka, Hrvatska.

Ćorić, Tvrtko (2015) Parkirna stanica za bicikle sa sustavom za zaštitu od krađa. = Bicycle parking station with theft prevention system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Ćosić, Boris and Dominković, Dominik Franjo and Ban, Marko and Perković, Luka (2015) Location optimization for biomass trigeneration system with pit thermal energy storage: the case of the city of Petrinja. = Location optimization for biomass trigeneration system with pit thermal energy storage: the case of the city of Petrinja. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09.2015.-02.10.2015., Dubrovnik, Hrvatska.

Ćosić Lesičar, Jelena and Posavec, Marko and Stepanić, Josip (2015) The Use of Information Entropy in Extracting the Irregularities of Autonomous Systems. = The Use of Information Entropy in Extracting the Irregularities of Autonomous Systems. Annals of faculty Engeineering Hunedoara - International Journal of Engineering, XIII (3). pp. 269-272. ISSN 1584-2673. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.

Ćurković, Lidija and Majić Renjo, Marijana and Ciglar, Damir (2015) Effects of cold isostatic pressing and granule size distribution on the densification of alumina ceramics. = Effects of cold isostatic pressing and granule size distribution on the densification of alumina ceramics. Materialprufung, 57 (6). pp. 495-498. ISSN 0025-5300. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Ćurčija, Aleksandar (2015) Upravljanje brzinom vrtnje propelera primjenom istosmjernog motora sa permanentnim magnetima. = Propeller speed control utilizing a permanent-magnet DC motor. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.

Ćustić, Lamia (2015) Procjena strukturnog integriteta podmorskog cjevovoda. = Structural integrity assesment of subsea pipeline. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćatipović, Ivan.

Č

Čadež, Luka (2015) Primjena kanbana u skladištu poduzeća. = Implementation of kanban system in warehouse of a company. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Čakmak, Damjan (2015) Numerička analiza krutosti gumenog zgloba rastojnika-prigušivača. = Numerical analysis of the spacer damper rubber joint stiffness. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.

Čavar, Marko (2015) Mogućnost izgradnje reverzibilne hidroelektrane na Perućkom jezeru. = A possiblity for construction of reversible hydro power plant at the Peruca lake. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.

Čegec, Nikola (2015) Razvoj upravljačkog sustava stroja za odvalno glodanje ozubljenja. = Development of the CNC system for gear hobbing machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.

Čegec, Nikola and Staroveški, Tomislav and Klaić, Miho and Udiljak, Toma (2015) Development of a CNC System for Gear Hobbing Machine. = Development of a CNC System for Gear Hobbing Machine. In: 15th International Scientific Conference on Production Engineering - CIM 2015, 10-13.6.2015., Vodice, Hrvatska.

Čemerin, Vanja (2015) Stroj za usitnjavanje biorazgradivog otpada za proizvodnju bioplina. = Biodegradable material milling machine for biogas digester. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.

Čiča, Damjan (2015) Analiza postojećeg stanja proizvodnog sustava uporabom statističkih metoda. = Analysis of current state of the production process using statistical methods. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Čolić, Luka (2015) Robotizirano zavarivanje nehrđajućih čelika A-TIG postupkom. = Robotized welding of stainless steels with A-TIG process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.

Čondrić, Iva (2015) Vitki menadžment u uslužnim procesima. = Lean management in service processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Čulig-Tokić, Dario and Krajačić, Goran and Doračić, Borna and Mathiesen, Brian Vad and Krklec, Robert and Larsen, Jesper Møller (2015) Comparative analysis of the district heating systems of two towns in Croatia and Denmark. = Comparative analysis of the district heating systems of two towns in Croatia and Denmark. Energy (Oxford), 92. pp. 435-443. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.

Čurčija, Filip (2015) Rotacijski paletni spremnik. = Rotary pallet magazine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.

Čveljo, Ivan (2015) Servisna portalna dizalica za lokomotive. = Maintenance portal crane for locomotives. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.

Đ

Đukić, Ankica (2015) Autonomous hydrogen production system. = Autonomous hydrogen production system. International Journal of Hydrogen Energy, 40 (24). pp. 7465-7474. ISSN 0360-3199. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 1.

Đukić, Ankica and Güttler, Ivan and Pašičko, Robert (2015) Forecasting future impact of hydrogen powered vehicles on power system development in Croatia. = Forecasting future impact of hydrogen powered vehicles on power system development in Croatia. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 27.9.-2.10.2015., Dubrovnik, Hrvatska.

Đukić, Ankica and Güttler, Ivan and Pašičko, Robert (2015) Perspectives of hydrogen automotive applications in Croatia. = Perspectives of hydrogen automotive applications in Croatia. In: Global Conference on Global Warming, 24-27.5.2015., Atena, Grčka.

Đukić, Goran and Opetuk, Tihomir and Cajner, Hrvoje and Lerher, Tone and Jelić, Ana (2015) Routing of VNA man-up turret trucks and vertical order-pickers. = Routing of VNA man-up turret trucks and vertical order-pickers. In: XIII. International logistics & supply chain congress, 22.-23.10.2015., Izmir, Turska.

Đukić, Goran and Opetuk, Tihomir and Lerher, Tone (2015) A throughput model for a dual-tray Vertical Lift Module with a human order-picker. = A throughput model for a dual-tray Vertical Lift Module with a human order-picker. International journal of production economics, 170 (C). pp. 874-881. ISSN 0925-5273. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3.

Đukić, Predrag and Wolf, Hinko and Jani, Barle (2015) Simple dynamic model of wind turbine tower with experimental verification. = Simple dynamic model of wind turbine tower with experimental verification. International journal for engineering modelling, 28 (1-4). pp. 49-59. ISSN 1330-1365. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Đurković, Aleksandar (2015) Analiza sustava gospodarenja otpadom na području Grada Zagreba i SZ Hrvatske s termičkom obradom otpada. = Analysis of the waste management system in Zagreb and NW region of Croatia with thermal treatment of waste. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.

Š

Šafarić, Krešimir (2015) Projektiranje prihvatnice elektro-hidrauličkog robotskog manipulatora. = Design of a gripper for an electro-hydraulic robotic manipulator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.

Šagi, Goran and Lulić, Zoran and Ilinčić, Petar (2015) Višekriterijski optimizacijski model u razvoju ovjesa vozila. = Multi-objective optimization model in the vehicle suspension system development process. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (4). pp. 1021-1028. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Šagi, Goran and Lulić, Zoran and Mahalec, Ivan (2015) Reverse Engineering. = Reverse Engineering. In: Concurrent Engineering in the 21st Century: Foundations, Developments and Challenges. Springer International Publishing, Switzerland, pp. 319-354. ISBN 978-3-319-13775-9

Šako, Zvonimir (2015) Analiza postupaka osnivanja suhog doka. = Analysis of graving drydock preliminary design. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.

Šalamon, Mateja (2015) Procjena pomorstvenih karakteristika kontejnerskog broda. = Evaluation of seakeeping characteristics of container ship. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.

Šare, Anamarija and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven (2015) The integration of renewable energy sources and electric vehicles into the power system of the Dubrovnik region. = The integration of renewable energy sources and electric vehicles into the power system of the Dubrovnik region. Energy, Sustainability and Society, 5 (1). pp. 1-16. ISSN 2192-0567. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.

Šarić, Ante (2015) Usklađeno dvoručno robotsko sklapanje. = Coordinated dual-arm assembly. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan and Kovačić, Zdenko.

Šarić - Ormuž, Ira (2015) Zelena proizvodnja. = Green manufacturing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.

Šavar, Mario and Wolf, Hinko and Sutlović, Igor (2015) Rehabilitacija cjevovodnih sustava. = In: 13th Natural Gas, Heat and Water Conference/6th International Natural Gas, Heat and Water Conference, 23-25. 09. 2015., Osijek, Hrvatska.

Šeb, Borna (2015) Toplinska mreža grada Zagreba. = City of Zagreb district heating network. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bogdan, Željko.

Šegina, Martina (2015) Trošenje tribopara pločica i diska kočionog sustava bicikla. = Wear of tribo-pair pads and disc of brake system for a bicycle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Šekoranja, Bojan (2015) Vjerojatnosni model robotskoga djelovanja u fizičkoj interakciji s čovjekom. = Probabilistic model of robot behaviour for physical human-robot interaction. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Šekoranja, Bojan and Jerbić, Bojan and Šuligoj, Filip (2015) Virtual surface for human-robot interaction. = Virtual surface for human-robot interaction. Transactions of FAMENA, 39 (1). pp. 53-64. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2015). Točan broj autora: 3.

Šepčević, Ivan (2015) Okretni granik s jednokrakim dohvatnikom. = Slewing single-jib crane. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.

Šercer, Mladen and Raos, Pero and Rujnić-Sokele, Maja (2015) Study on thermal properties of synthetic and bio - based polyurethane. = Study on thermal properties of synthetic and bio - based polyurethane. Thermal science, 19 (3). pp. 915-922. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.

Šestan, Danijel (2015) Nova metoda za realizaciju ljestvice injišta/rosišta zraka u temperaturnom području od -70 °C do 5 °C. = New method for realization of the dew/frost point temperature scale in the range between -70 °C and 5 °C. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.

Šestan, Danijel and Jugović, Antun (2015) Evaluation of calibration bath with two precision thermometers. = Evaluation of calibration bath with two precision thermometers. In: 11th International Conference, Croatian Laboratories CROLAB, 21.10.2015. do 24.10.2015., Zadar, Hrvatska.

Šešet, Krunoslav (2015) Numerička analiza strujanja kroz aksijalni ventlator sa srpastim lopaticama. = Numerical analysis of fluid flow through axial fan with sickle blades. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.

Šimić, Ivan (2015) Razvoj modela za predviđanje toplinskog odziva zgrade. = Development of a model for building's thermal response prediction. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.

Šimpović, Ilija (2015) Postupci izrade navoja. = Methods for thread making. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.

Šimunović, Vedran and Baršić, Gorana and Katić, Marko and Mudronja, Vedran (2015) Measurement of parallel thread gauges in HMI/FSB-LPMD. = Measurement of parallel thread gauges in HMI/FSB-LPMD. In: 15. International scientific conference on production engineering CIM 2015, 10-13.06.2015., Vodice, Croatia.

Širanović, Roman (2015) Svojstva i primjena biorazgradivog polimera PLA. = Properties and application of biodegradable polymers PLA. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Šitum, Željko (2015) Four-legged walking robot actuated by pneumatic artificial muscles. = Four-legged walking robot actuated by pneumatic artificial muscles. In: International Scientific Conference Innovation - Driven Defence Enterprising, 19-20.10.2015., Zagreb.

Šitum, Željko and Trslić, Petar and Trivić, Denis and Štahan, Valentino and Brezak, Hrvoje and Sremić, Dominik (2015) Pneumatic muscle actuators within robotic and mechatronic systems. = Pneumatic muscle actuators within robotic and mechatronic systems. In: International Conference Fluid Power 2015 Maribor, 17-18.09.2015., Maribor, Slovenija.

Šiško, Igor (2015) Prediktivni model tehničke ispravnosti vozila temeljem tehničkih pregleda. = Predictive roadworthiness of vehicles model based on periodical technical inspections. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.

Škec, Stanko (2015) Nematerijalni indikatori u razvoju tehničkih sustava. = The intangible indicators in development of technical systems. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Škec, Stanko and Štorga, Mario (2015) Work Sampling for Measuring Intellectual Capital Elements in Product Development Context. = Work Sampling for Measuring Intellectual Capital Elements in Product Development Context. EUREKA 8723 VISINEV projekt.

Škec, Stanko and Štorga, Mario and Perišić, Marija Majda (2015) Analysis of IC Performance Indicators for KONČAR Institute. = Analysis of IC Performance Indicators for KONČAR Institute. EUREKA 8723 VISINEV projekt.

Škec, Stanko and Štorga, Mario and Perišić, Marija Majda (2015) Analysis of IC Performance Indicators for TPV Automotive Industry. = Analysis of IC Performance Indicators for TPV Automotive Industry. EUREKA 8723 VISINEV projekt.

Škec, Stanko and Štorga, Mario and Tečec Ribarić, Zlatka and Marjanović, Dorian (2015) Work sampling approach for measuring intellectual capital elements in product development context. = Work sampling approach for measuring intellectual capital elements in product development context. In: International Conference on Engineering Design (ICED 2015), 27.-31.07.2015., Milan, Italija.

Šklebar, Jelena (2015) Sigurno parkiranje bicikla. = A solution for safe bicycle parking. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.

Škrivanek, Tihomir (2015) Analiza rasklapanja pri popravku alatnog stroja. = Analysis of disassembly in the repair of the machine tool. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.

Škugor, Branimir and Deur, Joško (2015) Analysis of techno-economic aspects of an energy system including delivery electric vehicle fleet and renewable energy sources. = Analysis of techno-economic aspects of an energy system including delivery electric vehicle fleet and renewable energy sources. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09-02.10.2015., Dubrovnik, Hrvatska.

Škugor, Branimir and Deur, Joško (2015) Bi-level optimisation framework for electric vehicle fleet charging. = Bi-level optimisation framework for electric vehicle fleet charging. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09-02.10.2015., Dubrovnik, Hrvatska.

Škugor, Branimir and Deur, Joško (2015) Dynamic programming-based optimisation of charging an electric vehicle fleet system represented by an aggregate battery model. = Dynamic programming-based optimisation of charging an electric vehicle fleet system represented by an aggregate battery model. Energy, 92 (3). pp. 456-465. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 2.

Škugor, Branimir and Deur, Joško (2015) GPS measurement-based road grade reconstruction with application to electric vehicle simulation and analysis. = GPS measurement-based road grade reconstruction with application to electric vehicle simulation and analysis. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 27.09-02.10.2015., Dubrovnik.

Škugor, Branimir and Deur, Joško (2015) A nonlinear charge - based model of electric vehicle fleet aggregate battery. = A nonlinear charge - based model of electric vehicle fleet aggregate battery. In: European Battery, Hybrid and Fuel Cell Electric Vehicle Congress (EEVC), 02-04.12.2015., Brussels, Belgium.

Škugor, Branimir and Deur, Joško (2015) A novel model of electric vehicle fleet aggregate battery for energy planning studies. = A novel model of electric vehicle fleet aggregate battery for energy planning studies. Energy, 92 (3). pp. 444-455. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 2.

Šnajdar Musa, Mateja (2015) Razvoj titan-magnezij kompozita za biomedicinsku primjenu. = Development of titaniummagnesium composite for biomedical applications. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko and Ćatić, Amir.

Šojat, Borna (2015) Nestacionarno jednodimenzijsko temperaturno polje u ravnoj stijenci s toplinskim izvorom. = Unsteady 1 - D temperature field in a plane wall with heat source. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.

Šop, Marko (2015) Stroj za izradu peleta od biomase. = Biomass pellet making machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Španić, Siniša (2015) Vizualno prepoznavanje i modeliranje radnog prostora mobilnog robota. = Visual recognition and modeling of mobile robot working space. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Andrej.

Špičko, Marino (2015) Konstrukcija dvoosnog mehanizma robotske glave. = Design of two-axis mechanism of robotis head. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Špoljarić, Andreja (2015) Neuronska mreža u učenju kvadriranja brojeva. = Neural network in squaring numbers. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.

Štefanić, Nedeljko and Perica, Mladen and Cajner, Hrvoje and Banić, Marko and Lovrenčić, Kruno and Štefanić, Anja and Gudlin, Mihael and Hegedić, Miro (2015) Leanom upravljana bolnica. = Lean Hospital. In: Lean Spring Summit 2015, 21-23.05.2015., Šibenik, Hrvatska.

Štefančić, Hrvoje (2015) Analitički pristup dinamici kotača uzrokovanoj neravninama na kolniku. = Analytic approach to the wheel dynamics caused by roadway irregularities. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kranjčević, Nenad.

Šubat, Andrej (2015) Računalna dinamika vjetroagregata. = Computational dynamics of wind turbine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.

Šuligoj, Filip and Jerbić, Bojan and Švaco, Marko and Šekoranja, Bojan and Mihalinec, Dominik and Vidaković, Josip (2015) Medical applicability of a low-cost industrial robot arm guided with an optical tracking system. = Medical applicability of a low-cost industrial robot arm guided with an optical tracking system. In: IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2015, 28.09-02.10.2015., Hamburg, Njemačka.

Šutalo, Filip (2015) Optimiranje konstrukcije nosača mobilnog manipulatora. = Optimization of the mobile manipulator construction. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.

Šutalo, Zvonimir (2015) Otprašivanje u pogonu sirove kave. = Dedusting in a row cofee plant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ruševljan, Miroslav.

Šućur, Nada (2015) Analiza dotrajalosti bregaste osovine četverotaktnog motora s unutarnjim izgaranjem. = Failure of camshaft of four-stroke internal combustion engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.

Šušnjar, Mate (2015) Trošenje drobilice za kamen. = Wear of stone crushers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.

Švaco, Marko (2015) Planiranje robotskog djelovanja zasnovano na tumačenju prostornih struktura. = Robot behaviour planning based on interpretation of spatial structures. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Švaić, Vjeran and Lukenda, Željko and Županić, Danijel and Bolarić, Antonio and Jurinjak, Bojan (2015) Dynamics of skin temperature of the knees during physical exercise measured by infrared thermography. = Dynamics of skin temperature of the knees during physical exercise measured by infrared thermography. In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.

Šćurec, Marko (2015) Vizualizacija robotskog lica. = Visualization of robotic face. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.

Ž

Žakula, Tea and Armstrong, Peter and Norford, Leslie (2015) Advanced cooling technology with thermally activated building surfaces and model predictive control. = Advanced cooling technology with thermally activated building surfaces and model predictive control. Energy and buildings, 86. pp. 640-650. ISSN 0378-7788. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 3.

Žalac, Elizabeta (2015) Biokompoziti ojačani morskim školjkama za stomatološke primjene. = Sea shell based biocomposites for dental applications. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.

Žanetić, Ivan (2015) Razvoj podvodnog samohodnog uređaja za nerazorno ispitivanje spremnika. = Development of self-propelled underwater device for nondestructive testing of a vessel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.

Žanić, Vedran and Andrić, Jerolim and Hadžić, Neven (2015) Optimization procedure for liquid natural gas carrier structural design. = Optimization procedure for liquid natural gas carrier structural design. Proceedings of the Institution of Mechanical Engineers. Part M : Journal of Engineering for the Maritime Environment, 229 (1). pp. 14-35. ISSN 1475-0902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 3.

Žanić, Vedran and Andrić, Jerolim and Prebeg, Pero and Pirić, Karlo and Radić, Lukša (2015) Design Support System application to structural design of mega-yacht. = Design Support System application to structural design of mega-yacht. In: 16th International Maritime Association of the Mediterranean Congress, 21-24.09.2015., Pula, Hrvatska.

Žanić, Vedran and Kitarović, Stanislav (2015) Influence of the shear force and distributed load on the longitudinal ultimate strength. = Influence of the shear force and distributed load on the longitudinal ultimate strength. In: 2nd International Conference on Maritime Technology and Engineering - MARTECH2014, 15-17.10.2014., Lisabon, Portugal.

Žganec, Viktor (2015) Simulacijski model proizvodnog sustava. = Simulation model of production system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.

Žiha, Kalman (2015) Stress-Strain Interaction Model of Plasticity. = Stress-Strain Interaction Model of Plasticity. Acta Polytechnica Hungarica, 12 (1). pp. 41-54. ISSN 1785-8860. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 1.

Žmak, Irena and Jakovljević, Suzana and Bernat, Marija (2015) Comparison of Microstructure of the Adriatic Monodonta and the Mediterranean Limpet. = Comparison of Microstructure of the Adriatic Monodonta and the Mediterranean Limpet. In: Matrib 2015. Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić, 25-27.06.2015., Vela Luka, Hrvatska.

Županić, Doris (2015) Zaštita od korozije priobalnih vjetroelektrana. = Corrosion protection of onshore windmills. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.

Županić, Doris and Bolarić, Antonio and Stančić, Mia and Piljek, Denis and Jurinjak, Bojan (2015) Thermal imaging of the outer surface of the Laboratory for engines and vehicles at the Faculty of mechanical engineering and naval architecture. = Thermal imaging of the outer surface of the Laboratory for engines and vehicles at the Faculty of mechanical engineering and naval architecture. In: 12. konferencija o termografiji = 12th conference on thermography, 23.04.2015., Zagreb; Croatia.

Žužul, Josip (2015) Obodna pumpa. = Regenerative pump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.