  |
 | Up a level |
Ababneh, Amer Khalil and Jawarneh, Ali M. and Tarawneh, Mohammad Al and Tlilan, Hitham M. and Duić, Neven (2016) Evaluation of Solar Parabolic Trough Collector for the Application of Seawater Desalination. = Evaluation of Solar Parabolic Trough Collector for the Application of Seawater Desalination. International Review of Mechanical Engineering, 10 (6). pp. 443-451. ISSN 1970-8734. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Ajduković, Ante (2016) Utjecaj temperature na jamičastu koroziju nehrđajućih čelika. = Effect of temperature on pitting of stainless steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Alar, Vesna and Runje, Biserka and Ivušić, Franjo and Horvatić Novak, Amalija and Mihaljević, Morana (2016) Corrosion behaviour of stainless steel in contact with wine and beer. = Corrosion behaviour of stainless steel in contact with wine and beer. Metalurgija, 55 (3). pp. 437-449. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 5.
Alar, Vesna and Žmak, Irena and Runje, Biserka and Horvatić Novak, Amalija (2016) Development of models for prediction of corrosion and pitting potential on AISI 304 stainless steel in different environmental conditions. = Development of models for prediction of corrosion and pitting potential on AISI 304 stainless steel in different environmental conditions. International Journal of Electrochemical Science, 11. pp. 7674-7689. ISSN 1452-3981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 4.
Alar, Vesna and Žmak, Irena and Stojanović, Ivan and Šimunović, Vinko and Čeralinac, Zoran (2016) Abrasion and erosion wear of electrodeposited Ni-SiC nano-composite coatings. = Abrasion and erosion wear of electrodeposited Ni-SiC nano-composite coatings. In: 16th International Conference on New Trends in Fatigue and Fracture - NT2F16, 24-27.05.2016., Hrvatska, Dubrovnik.
Aleksandrov Fabijanić, Tamara and Alar, Željko and Sakoman, Matija (2016) Multilayer gradient PACVD coating on cemented carbides. = Multilayer gradient PACVD coating on cemented carbides. In: World PM2016 Congress/Exhibition, 09-13.10.2016, Hamburg, Njemačka.
Aleksandrov Fabijanić, Tamara and Alar, Željko and Ćorić, Danko (2016) Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides. = Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides. International journal of refractory metals & hard materials, 54. pp. 82-89. ISSN 0263-4368. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Aleksandrov Fabijanić, Tamara and Franz, Mladen and Alar, Željko (2016) Influential factors on hardness uniformity of vickers hardness blocks for high hardness range. = Influential factors on hardness uniformity of vickers hardness blocks for high hardness range. Measurement, 78. pp. 358-365. ISSN 0263-2241. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Aleksandrov Fabijanić, Tamara and Jakovljević, Suzana and Franz, Mladen and Jeren, Ivan (2016) Influence of grain growth inhibitors and powder size on the properties of ultrafine and nanostructured cemented carbides sintered in hydrogen. = Influence of grain growth inhibitors and powder size on the properties of ultrafine and nanostructured cemented carbides sintered in hydrogen. Metals, 6 (9). ISSN 2075-4701. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Alerić, Luka (2016) Stabilnost osteosinteze dorzalnom pločicom na zaključavanje kod prijeloma distalnog radijusa. = Stability of fixation of distal radius fracture using dorsal locking plate. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Andrašec, Josip (2016) Numerička studija vrtloga na vrhu krila. = Numerical study of a wing tip vortex. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Andreu, Javier Felipe and Schneider, Daniel Rolph and Krajačić, Goran (2016) Evaluation of integration of solar energy into the district heating system of the city of Velika Gorica. = Evaluation of integration of solar energy into the district heating system of the city of Velika Gorica. Thermal science, 20 (4). pp. 1049-1060. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Andrić, Jerolim and Pirić, Karlo and Žanić, Vedran and Pirović, Tonči (2016) FEM based structural analysis and optimization of a mega-yacht. = FEM based structural analysis and optimization of a mega-yacht. In: 22nd Symposium on Theory and Practice of Shipbuilding, In Memoriam prof. Leopold Sorta, 6-8.10.2016., Trogir, Hrvatska.
Andrić, Jerolim and Prebeg, Pero and Pirić, Karlo and Kitarović, Stanislav and Stipić, Tomislav and Žanić, Vedran and Čudina, Predrag and Bezić, Ana and Andrišić, Josip (2016) Structural optimization of a bulk carrier according to IACS CRS-BC. = Structural optimization of a bulk carrier according to IACS CRS-BC. In: 22nd Symposium on Theory and Practice of Shipbuilding, In Memoriam prof. Leopold Sorta, 6-8.10.2016., Trogir, Hrvatska.
Andrić, Jerolim and Prebeg, Pero and Pirić, Karlo and Kitarović, Stanislav and Žanić, Vedran and Čudina, Predrag and Bezić, Ana and Andrišić, Josip (2016) FE based structural optimization according to IACS CRS-BC. = FE based structural optimization according to IACS CRS-BC. In: 13th International Symposium on Practical Design of Ships and Other Floating Structures, 4-8.09.2016, Kopenhagen, Danska.
Andrić, Karlo-Josip (2016) Modeliranje energetskih sustava koji sadrže jedinice za proizvodnju energije iz visokih vjetrova. = Modelling of energy systems containing the units for power production from high altitude winds. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Andrić, Marijan and Vrdoljak, Milan (2016) Analiza aerodinamičke interferencije zrakoplova u bliskoj miješanoj formaciji. = Aerodynamic interference analysis of mixed close formation flight. In: Sedmi susret Hrvatskoga društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Androlić, Marin (2016) Izrada vodilja za sintezu biomaterijala u medicinskim konstrukcijama. = Guidelines creation for synthesis of materials in medical designs. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Antić, Domagoj and Lažeta, Zvonimir and Šitum, Željko (2016) Automatic levelling and wireless control of a mobile hydraulic platform with telescopic crane. = Automatic levelling and wireless control of a mobile hydraulic platform with telescopic crane. Ventil, 22 (4). pp. 296-300. ISSN 1318-7279. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Antić, Ivan (2016) Vizijski sustav za prepoznavanje objekata prema boji. = Vision system for object color tracking. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Antolić, Adrian (2016) Zavarivanje laserom. = Laser welding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Antolković, Vjeran (2016) Stroj za usitnjavanje biljnih ostataka. = Biomas chipper. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Ančić, Ivica (2016) Energetska učinkovitost i ekološka prihvatljivost brodskih integriranih energetskih sustava. = Energy efficiency and environmental impact of marine integrated power systems. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šestan, Ante.
Ančić, Ivica and Šestan, Ante (2016) Definition of Capacity in the EEDI for Ro-Ro Passenger Ships. = Definition of Capacity in the EEDI for Ro-Ro Passenger Ships. In: SNAME Maritime Convention 2016, 01-05.11.2016., Bellevue, Washington, SAD.
Ančić, Ivica and Šestan, Ante and Vladimir, Nikola (2016) Energetske i ekološke značajke suvremenih Ro-Ro putničkih brodova. = Energy and ecological characteristics of modern Ro-Ro passenger ships. In: 22. Simpozij "Teorija i praksa brodogradnje" in memoriam prof. Leopold Sorta (SORTA 2016), 06-08.10.2016., Trogir, Seget Donji.
Arland, Josip (2016) Analiza naprezanja i deformacija u toplinski opterećenoj štapnoj konstrukciji. = Analysis of stresses and strains in rod structure subjected to thermal load. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.
Azenić, Adam (2016) Implementacija i validacija modela propagiranja zvučnih valova. = Implementation and validation of acoustic wave propagation model. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Babak, Tatyana and Duić, Neven and Khavin, Gennadii and Boldyryev, Stanislav and Krajačić, Goran (2016) Possibility of heat pump use in hot water supply systems. = Possibility of heat pump use in hot water supply systems. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (3). pp. 203-215. ISSN 1848-9257. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Babić, Damir (2016) Utjecaj kemijskog sastava čelika na svojstva aluminiziranih slojeva. = Influence of chemical composition of steels on properties of aluminized layers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Babić, Domagoj (2016) Utjecaj debljine TiCN prevlake na otpornost abrazijskom trošenju visokolegiranih alatnih čelika za hladni rad. = Influence of TiCN coating thickness on abrasion wear resistance of high alloyed cold work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Babić, Nikola (2016) A-TIG zavarivanje duplex čelika. = A-TIG welding of duplex steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Badurina-Žakan, Ivan (2016) Usporedba konvencionalne i računalne radiografije kod ispitivanja ramenjača krila zrakoplova. = Computed vs. convential radiography for aircraft wing spar inspection. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Bajac, Aleksandra (2016) Ispitivanje ultrazvučnog mjerila protoka. = Testing of ultrasonic flowmeter. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Bajac, Jurica (2016) Kotao za centralno grijanje ložen komadnim drvom. = Hot water boiler fired by wood logs. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Balaton, Antun (2016) Utjecaj usmjerenosti strukture na savojnu čvrstoću drva. = Effect of anisotropy on bending strength of wood. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Baleta, Jakov (2016) Razvoj numeričkih modela u području filma kapljevine na stjenci i Lagrangeovog spreja. = Development of numerical models within the liquid film and Lagrangian spray framework. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Baleta, Jakov and Mikulčić, Hrvoje and Petranović, Zvonimir and Vujanović, Milan and Duić, Neven (2016) Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. = Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications. Energy Conversion and Management, 125. pp. 59-69. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.
Baleta, Jakov and Vujanović, Milan and Pachler, Klaus and Wang, Jin (2016) Development and implementation of multicomponent liquid wall film evaporation model. = Development and implementation of multicomponent liquid wall film evaporation model. In: 11th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 04-09.09.2016., Lisabon, Portugal.
Balić, Dražen and Maljković, Danica and Lončar, Dražen and Schneider, Daniel Rolph (2016) Selection of optimal generation set-up considering the socio economic impact. = Selection of optimal generation set-up considering the socio economic impact. In: 11th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 04-09.09.2016., Lisabon, Portugal.
Balić, Merima and Lucić, Ružica and Mehadžić, Korina and Bago, Ivona and Anić, Ivica and Jakovljević, Suzana and Plečko, Vanda (2016) The efficacy of photon-initiated photoacoustic streaming and sonic activated irrigation combined with QMiX solution or sodium hypochlorite against intracanal biofilm. = The efficacy of photon-initiated photoacoustic streaming and sonic activated irrigation combined with QMiX solution or sodium hypochlorite against intracanal biofilm. Lasers in medical science, 31 (2). pp. 335-342. ISSN 0268-8921. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 7.
Balog, Martin and Viskić, Joško and Krizik, Peter and Schauperl, Zdravko and Šnajdar, Mateja and Stanec, Zlatko and Ćatić, Amir (2016) CP Ti fabricated by low temperature extrusion of HDH powder: application in dentistry. = CP Ti fabricated by low temperature extrusion of HDH powder: application in dentistry. Key engineering materials, 704. pp. 351-359. ISSN 1013-9826. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.
Ban, Marko and Vujanović, Milan (2016) Investigation of Dual-fuel Combustion Properties for CFD Simulation Purposes. = Investigation of Dual-fuel Combustion Properties for CFD Simulation Purposes. In: 11th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES, 04-09.09.2016., Lisabon, Portugal.
Ban, Michael (2016) Oblikovanje postolja za dvoručni robot. = Design of a stand for two-handed robot. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Barbarić, Marina and Guzović, Zvonimir (2016) Optimal design of hydrokinetic turbines for river application. = Optimal design of hydrokinetic turbines for river application. In: 11th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, 04-09.09.2016., Lisabon, Portugal.
Barbarić, Marina and Lončar, Dražen (2016) Energy management strategies for combined heat and electric power micro-grid. = Energy management strategies for combined heat and electric power micro-grid. Thermal science, 20 (4). pp. 1091-1103. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2015). Točan broj autora: 2.
Barkaoui, Alae-Eddine and Boldyryev, Stanislav and Duić, Neven and Krajačić, Goran and Guzović, Zvonimir (2016) Appropriate integration of geothermal energy sources by Pinch approach : Case study of Croatia. = Appropriate integration of geothermal energy sources by Pinch approach : Case study of Croatia. Applied energy, 184. pp. 1343-1349. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.
Barta, Marija (2016) Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja. = Optimization of natural organic matter degradation by UV-based processes. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje and Cajner, Hrvoje.
Bartulić, Ivan (2016) Točnost i preciznost rezultata dimenzionalnih mjerenja kod primjene računalne tomografije. = Accuracy and precision of dimensional computed tomography. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Baržić, Iva (2016) Primjena korelacije digitalne slike za in vitro mjerenje pomaka na svježim kostima. = Application of digital image correlation for in vitro displacement measurement on fresh bones. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Batas-Bjelić, Ilija and Rajaković, Nikola and Duić, Neven (2016) Smart municipal energy grid within electricity market. = Smart municipal energy grid within electricity market. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran.
Batas-Bjelić, Ilija and Rajaković, Nikola and Krajačić, Goran and Duić, Neven (2016) Two methods for decreasing the flexibility gap in national energy systems. = Two methods for decreasing the flexibility gap in national energy systems. Energy, 115 (3). pp. 1701-1709. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Batistić, Ivan (2016) Proračun koeficijenata otpora i tlaka za optjecanje cilindra podkritičnim Reynoldsovim brojem. = Drag and pressure coefficient for subcritical Reynolds number flow around a cylinder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijašević, Dubravko.
Bauer, Branko and Jurica, Maja and Dolinar, Alen and Garašić, Ivica (2016) Utjecaj kemijskog sastava aluminijske legure u lijevanom stanju na kvalitetu spoja zavarenog MIG postupkom. = Influence of chemical composition on the quality of MIG welded As - cast aluminium alloy joint. In: 41. Međunarodna konferencija HDTZ, 8.-11. 06 2016., Opatija, Republika Hrvatska.
Bauer, Branko and Jurica, Maja and Dolinar, Alen and Garašić, Ivica (2016) Utjecaj kemijskog sastava aluminijske legure u lijevanom stanju na kvalitetu spoja zavarenog MIG postupkom. = Influence of Chemical Composition on the Quality of MIG welded As - Cast Aluminium alloy Joint. In: 41. Međunarodna konferencija HDTZ, Zavarivanje - Welding 2016., Opatija, Hrvatska.
Bauer, Branko and Mihalic Pokopec, Ivana (2016) Ljevarstvo i prerada polimera - dio Ljevarstvo. = Casting and polymer processing - part Casting. [Teaching Resource] (Unpublished)
Bačić, Ivana and Otmačić Ćurković, Helena and Ćurković, Lidija and Mandić, Vilko and Šokčević, Zrinka (2016) Corrosion Protection of AISI 316L Stainless Steel with the Sol-Gel Yttria Stabilized ZrO2 Films: Effects of Sintering Temperature and Doping. = Corrosion Protection of AISI 316L Stainless Steel with the Sol-Gel Yttria Stabilized ZrO2 Films: Effects of Sintering Temperature and Doping. International Journal of Electrochemical Science, 11 (11). pp. 9192-9205. ISSN 1452-3981. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 5.
Bašić, Bojan (2016) Karakterozacija vruće valjane okrugle šipke iz čelika 39NiCrMo3. = Characterisation of hot rolled round bar of steel grade 39NiCrMo3. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Bašnec, Matija (2016) Protupožarni premaz. = Fire retardant coating. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Beale, Steven B. and Choi, Hae-Won and Pharoah, Jon and Roth, Helmut and Jasak, Hrvoje and Jeon, Dong Hyup (2016) Open-source computational model of a solid oxide fuel cell. = Open-source computational model of a solid oxide fuel cell. Computer physics communications, 200. pp. 15-26. ISSN 0010-4655. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.
Bedeniković, Zdravko (2016) Mikrostrukturne greške u debelostijenim odljevcima od nodularnog lijeva. = Microstructural defects in heavy section ductile iron castings. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Bednjanec, Filip (2016) Umjeravanje uređaja za mjerenje kružnosti. = Calibration of roundness measuring instrument. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Begedin, Tomislav (2016) Preoblikovanje skladišnog sustava proizvodnog pogona. = Reengineering of production company's storage system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Belošević, Andrija (2016) Fizikalno-kemijska svojstva vodorazrjedivog premaza. = Physical and chemical properties of the waterborne coating. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Benić, Zoran and Piljek, Petar and Kotarski, Denis (2016) Matematičko modeliranje bespilotne letjelice s četiri rotora. = Mathematical Modelling of Unmanned Aerial Vehicles with Four Rotors. Interdisciplinary description of complex systems, 14 (1). pp. 88-100. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Benjak, Mateja (2016) Trošenje noža za kosilicu. = Wear of lawn mover blades. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.
Benković, Dajana (2016) Razrada koncepta solarne bespilotne letjelice. = Assesment of Concept of the Solar Unmanned Vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Benković, Tomislav (2016) Utjecaj temperature medija na iniciranje rupičaste korozije Cr-Ni čelika. = Influence of solution temperature on initiation of stainless steel pitting corrosion. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Beš, Borna (2016) Proračun potpunog izgaranja parafinskih ugljikovodika CnH2n+2. = The calculation of complete combustion of paraffin hydrocarbon fuels, CnH2n+2. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.
Bešenić, Tibor (2016) Implementacija i validacija elektrolitskog modela dva potencijala u numeričkom modelu gorivnog članka. = Implementation and validation of the two-potential electrolyte assembly equations in the computational fuel cell model. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Bešlić, Krešimir (2016) Primjena simulacijskog modeliranja u procesu osnivanja suvremene brodograđevne radionice. = Application of simulation modeling in the design of modern shipbuilding workshop. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Hadžić, Neven.
Beštak, Franjo (2016) Primjena balansiranja i centriranja u održavanju rotacijskih strojeva. = Application of balancing and centering in maintenance of rotating machines. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Bila, Filip (2016) Primjena vakuumske membrane pri obradi otpadne vode tekstilne industrije. = Application of vacuum membrane in the treatment of textile wastewater. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dobrović, Slaven.
Bilandžija, Josip (2016) Značajke modernih izvora struje za MAG zavarivanje. = Characteristics of modern power sources for MAG welding. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Bilušić, Martin and Runje, Biserka (2016) Traceability assurance in optical 3D metrology. = Traceability assurance in optical 3D metrology. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.
Blašković, Marko (2016) Utjecaj položaja bravice ortodontskog aparata na naprezanje u jednokorijenskom zubu. = Stress influence of fixed orthodontic device bracket on single root tooth. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Blašković, Valentino (2016) Sustav leteće kamere za konstrukcijski studio. = Design observatory flying camera support. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Blažević, Nikola (2016) Izrada modularnog 3D pisača. = Development of a modular 3D printer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.
Blažić, Mislav (2016) Ispitivanje i analiza značajki rada dvo-gorivnog motora. = Testing and performance analysis of dual fuel engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Boban, Luka and Soldo, Vladimir and Mandić, Marko (2016) Borehole temperature distribution during Thermal Response Test. = Borehole temperature distribution during Thermal Response Test. In: Energija i okoliš 2016., 26.-28.10.2016., Opatija, Hrvatska.
Bobetić, Marko (2016) Prerada serijskog osobnog automobila za automobilsko natjecanje drift. = Conversion of serial personal vehicle into drift competition vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran and Ormuž, Krunoslav.
Bodrušić, Toni (2016) Rekonstrukcija analizatora ispušnih plinova. = Retrofit of exhaust gas analyser. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Bogdanić, Dino and Landek, Darko (2016) Povećanje otpornosti na abrazijsko trošenje primjenom tvrdih PACVD prevlaka. = Improvement of abrasion wear resistance by using hard PACVD coating. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.
Bogdanović, Drago (2016) Stolni CNC laserski uređaj za graviranje i rezanje. = Desktop CNC laser engraver and cutter. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Bolanča, Antonijo (2016) Osiguravanje kvalitete izgradnje i održavanja plinskog transportnog sustava. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Mudronja, Vedran.
Boldyryev, Stanislav and Krajačić, Goran and Duić, Neven (2016) Cost Effective Heat Exchangers Network of Total Site Heat Integration. = Cost Effective Heat Exchangers Network of Total Site Heat Integration. In: PRES 2016, 27-31.08.2016., Prag, Češka.
Boldyryev, Stanislav and Mikulčić, Hrvoje and Krajačić, Goran and Duić, Neven (2016) Waste heat utilisation of Croatian cement industry accounting Total Site demands. = Waste heat utilisation of Croatian cement industry accounting Total Site demands. Computer Aided Chemical Engineering, 38. pp. 2223-2228. ISSN 1570-7946. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Boldyryev, Stanislav and Mikulčić, Hrvoje and Mohorović, Zoran and Vujanović, Milan and Krajačić, Goran and Duić, Neven (2016) The improved heat integration of cement production under limited process conditions: A case study for Croatia. = The improved heat integration of cement production under limited process conditions: A case study for Croatia. Applied thermal engineering, 105. pp. 839-848. ISSN 1359-4311. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.
Bonačić Bartolin, Petra and Lulić, Zoran (2016) A vehicle emissions and air quality in Zagreb and Koromačno, Croatia. = A vehicle emissions and air quality in Zagreb and Koromačno, Croatia. In: 4th International Symposium on Environmental Management - Towards Circular Economy, 7.-9.12.2016., Zagreb, Hrvatska.
Bosak, Matija (2016) Rekonstrukcija nosača mobilne pumpe u vatrogasnom vozilu. = Adaptation of the mobile pump´s frame in fire fighting vehicle. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Bosnar, Danijel (2016) Analiza Koanda strujanja oko kružnog cilindra. = Analysis of Coanda Jet Flow around a Circular Cylinder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.
Botica, Marko (2016) CMMS sustavi u održavanju zgrada. = CMMS systems in building maintenance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Botić, Slaven (2016) Utjecaj hrapavosti površine na prionjivost PACVD prevlake na tvrdim metalima. = Influence of the surface roughness on the adhesion of PACVD coating on hardmetals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Bošković, Fran (2016) Virtualna elektrana za energetski samodostatne otoke. = Virtual power plant for energy self-sufficient islands. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.
Bošnjaković, Alen and Memić, Haris and Grgec Bermanec, Lovorka and Džemić, Zijad (2016) Implementation of requirements of standard ISO/IEC 17020 in authorized bodies for verification of measuring instruments risk analysis. = Implementation of requirements of standard ISO/IEC 17020 in authorized bodies for verification of measuring instruments risk analysis. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.
Božić, Tomislav (2016) Standardizacija procesa ispitivanja ispravnosti rada transformatora. = The processes standardization of examining validity of transformers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Braun, Teo (2016) Informacijski sustav umjeravanja etalona duljine. = Gauge block calibration information system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.
Bregović, Marko (2016) Istraživanje stanja i trendova ergonomije skladišnih viličara. = Research of state and trends of warehouse forklift's ergonomics. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Brečić, Hrvoje (2016) Projektni indeks energetske učinkovitosti ultra velikog kontejnerskog broda tipa HHI SkyBench™ nosivosti 19000 TEU. = Energy efficiency design index of a HHI SkyBench™ 19000 TEU ultra large container ship. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vladimir, Nikola.
Breški, Tomislav (2016) Analiza naprezanja i deformacija u toplinski opterećenoj konstrukciji. = Analysis of stresses and strains in construction subjected to thermal load. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.
Brlić, Tin and Rešković, Stoja and Jakovljević, Suzana and Jandrlić, Ivan (2016) Distribution control of trace elements in aluminium oxide ceramics by scanning electron microscope equipped with EDS detector. = Distribution control of trace elements in aluminium oxide ceramics by scanning electron microscope equipped with EDS detector. In: MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.
Brozović, Stjepan (2016) Primjena koncepta održive proizvodnje u proizvodnji električnog vozila. = Implementation of the sustainable manufacturing in production of the electric vehicle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Budim, Antonio (2016) Utjecaj stanja površine na korozijsku postojanost nehrđajućeg dupleks čeličnog lijeva. = Effects of surface state on the corrosion resistance of a cast duplex stainless steel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Budić, Roko (2016) Mjerenje brzine i protoka zraka pomoću Prandtl-Pitotove cijevi. = Air velocity and flow measurements using Prandtl type Pitot tube. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Burazer, Frane (2016) Osnivanje sidrenog sustava pomorskog objekta za proizvodnju, skladištenje i istovar ugljikovodika. = Design of mooring system for floating production, storage and offloading (FPSO) vessel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćatipović, Ivan.
Burić, Ivan (2016) Dimenzoniranje sustava za proizvodnju električne energije iz visinskih vjetrova baziranog na Magnusovom efektu. = Dimensioning of a system for power production from high altitude winds based on Magnus' effect. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Butković, Daniel (2016) Računalna tomografija u dimenzionalnom mjeriteljstvu potpomognuta simulacijama. = Simulation-aided computed tomography for dimensional measurements. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Buzjak, Domagoj (2016) Virtualna stvarnost i njezine primjene. = Virtual reality and its applications. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Buzjak, Dražen (2016) Upravljačka jedinica makete dizala. = Control unit for model of elevator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Bušić, Matija and Garašić, Ivica and Kožuh, Zoran and Dolić, Natalija (2016) Analiza zavarenih spojeva izvedenih bazičnom dvostruko obloženom elektrodom. = Analysis of welded joints produced with basic double coated electrode. In: Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.
Bušić, Matija and Kožuh, Zoran and Klobčar, Damjan and Samardžić, Ivan (2016) Friction stir welding (FSW) of aluminium foam sandwich panels. = Friction stir welding (FSW) of aluminium foam sandwich panels. Metalurgija, 55 (3). pp. 473-476. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.
Bušić, Matija and Kožuh, Zoran and Klobčar, Damjan and Surjak, Martin (2016) Friction stir welding of 1,5 mm thin sheets of en aw 6063-t4 aluminium alloy using tool with simplified geometry. = Friction stir welding of 1,5 mm thin sheets of en aw 6063-t4 aluminium alloy using tool with simplified geometry. In: Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.
Bužančić Primorac, Branka (2016) Vjerojatnost sloma trupa oštećenoga tankera za prijevoz nafte. = The structural reliability of damaged oil tanker. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.
Bužančić Primorac, Branka and Parunov, Joško (2016) Review of statistical data on ship accidents. = Review of statistical data on ship accidents. In: Maritime Technology and Engineering, 04-06.07.2016., Lisabon, Portugal.
Caiazzo, Anna and Alujević, Neven and Pluymers, Bert and Desmet, Wim (2016) Active control of turbulent boundary layer sound transmission into a vehicle interior. = Active control of turbulent boundary layer sound transmission into a vehicle interior. Journal of Physics: Conference Series, 744 (1). pp. 1-13. ISSN 1742-6596. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Cao, Ruijie and Tan, Houzhang and Wang, Xuebin and Mikulčić, Hrvoje and Duić, Neven (2016) The research and the engineering demonstration of particles agglomeration in phase transition process improving the collection efficiency of WESP. = The research and the engineering demonstration of particles agglomeration in phase transition process improving the collection efficiency of WESP. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran.
Capparelli, Paolo (2016) Analiza izvedivosti primjene tehnologije RFID u tvornici kabela. = Feasibility analysis of application of RFID technology in the cable factory. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Cardiff, Philip and Tuković, Željko and Jasak, Hrvoje and Ivanković, Alojz (2016) A block-coupled Finite Volume methodology for linear elasticity and unstructured meshes. = A block-coupled Finite Volume methodology for linear elasticity and unstructured meshes. Computers & structures, 175. pp. 100-122. ISSN 0045-7949. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 4.
Cash, Philip and Stanković, Tino and Štorga, Mario (2016) An introduction to experimental design research. = An introduction to experimental design research. In: Experimental Design Research - Approaches, Perspectives, Applications. Springer International Publishing, Switzerland, pp. 3-12. ISBN 78-3-319-33779-1
Cerinski, Damijan (2016) Usporedba različitih konfiguracija repa primjenom metode noseće linije. = Comparison of different tail configurations with application of lifting line method. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Cerovski, Bruno (2016) Aditivi za maziva koja se koriste u vozilima. = Additives for lubricants used in vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.
Cesarec, Davor (2016) Lijevanje vilice od Al legure kokilnim lijevom. = Permanent mold casting of Al alloy fork. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Cho, Dae Seung and Choi, Tae Muk and Kim, Jin Hyeong and Vladimir, Nikola (2016) Structural intensity analysis of stepped thickness rectangular plates utilizing the finite element method. = Structural intensity analysis of stepped thickness rectangular plates utilizing the finite element method. Thin-walled structures, 109. pp. 1-12. ISSN 0263-8231. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Choi, Tae Muk and Vladimir, Nikola (2016) Free vibration analysis of stiffened panels with lumped mass and stiffness attachments. = Free vibration analysis of stiffened panels with lumped mass and stiffness attachments. Ocean engineering, 124. pp. 84-93. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.
Cho, Dae Seung and Kim, Byung Hee and Kim, Jin Hyeong and Vladimir, Nikola and Choi, Tae Muk (2016) Frequency response of rectangular plates with free-edge openings and carlings subjected to point excitation force and enforced displacement at boundaries. = Frequency response of rectangular plates with free-edge openings and carlings subjected to point excitation force and enforced displacement at boundaries. International Journal of Naval Architecture and Ocean Engineering, 8 (2). pp. 117-126. ISSN 2092-6782. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 5.
Cho, Dae Seung and Kim, Byung Hee and Vladimir, Nikola and Choi, Tae Muk (2016) Natural vibration analysis of vertical rectangular plates and stiffened panels in contact with fluid on one side. = Natural vibration analysis of vertical rectangular plates and stiffened panels in contact with fluid on one side. Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, 230 (1). pp. 114-125. ISSN 1475-0902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.
Cho, Dae Seung and Kim, Jin Hyeong and Choi, Tae Muk and Kim, Byung Hee and Vladimir, Nikola (2016) Dynamic analysis of rectangular plate structures with arbitrary edge supports subjected to harmonic point excitation force or enforced boundary displacement. = Dynamic analysis of rectangular plate structures with arbitrary edge supports subjected to harmonic point excitation force or enforced boundary displacement. In: The 6th International Conference on Structural Engineering, Mechanics and Computation SEMC-2016, 05-07.09.2016., Cape Town, South Africa.
Cimerman, Marijan (2016) Uređaj za mjerenje momentne krivulje elektromotora. = Electromotor torque measurement system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.
Cindori, Mihael (2016) Nova metoda za računalno modeliranje atmosferskog graničnog sloja. = A novel method for computational modelling of the atmospheric boundary layer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Franjo.
Cipek, Mihael and Škugor, Branimir and Čorić, Mirko and Kasać, Josip and Deur, Joško (2016) Control variable optimisation for an extended range electric vehicle. = Control variable optimisation for an extended range electric vehicle. International Journal of Powertrains, 5 (1). pp. 30-54. ISSN 1742-4267. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Crnčević, Luka (2016) Mehanička svojstva ortopedskih gipseva. = Mechanical properties of orthopedic casts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Haramina, Tatjana.
Crnčević, Luka and Haramina, Tatjana and Andabak, Anko (2016) Mehanička svojstva ortopedskih gipseva. = Mechanical properties of orthopedic casts. In: 17th International Conference on Materials, Tribology and Recycling MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.
Crvelin, Mihovil Jakov (2016) Hidraulički proračun cirkulacije u isparivaču generatora pare. = Hydraulic fluid flow calculation in a steam generator evaporator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.
Cukrov, Alen and Lugarić, Tomislav and Juretić, Franjo (2016) cfMeshPRO - automatski generator mreže kontrolnih volumena. = cfMeshPRO - An Automatic Finite Volume Mesh Generator. In: Sedmi susret Hrvatskoga društva za mehaniku, 16.-17.06.2016., Split, Hrvatska.
Cvijetić, Gregor and Jasak, Hrvoje (2016) Harmonic Balance Method for Turbomachinery Applications. = Harmonic Balance Method for Turbomachinery Applications. In: 11th OpenFOAM Workshop, 26-30.06.2016., Guimarães, Portugal.
Cvijetić, Gregor and Jasak, Hrvoje (2016) Primjena metode harmonijske ravnoteže za simulacije turbostrojeva. = Harmonic Balance Method for Application in Turbomachinery Simulations. In: Sedmi susret Hrvatskoga društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Cvijetić, Gregor and Jasak, Hrvoje and Vukčević, Vuko (2016) Finite volume implementation of the harmonic balance method for periodic non–linear flows. = Finite volume implementation of the harmonic balance method for periodic non–linear flows. In: 54th AIAA Aerospace Sciences Meeting: AIAA SciTech, 4-8.01.2016., San Diego, Kalifornija.
Dabro, Ante (2016) Prilagodba robota za glodaći ispitni postav. = Robot adaptation for milling testbed. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Daković, Mario and Hegedić, Miro (2016) Risk Management Approaches in Oil and Gas Onshore Construction Projects (Project Management). = Risk Management Approaches in Oil and Gas Onshore Construction Projects (Project Management). In: Mangement of Technology Step to Sustainable Technology, MOTSP 2014, 11-13.06.2014., Bol, Hrvatska.
De Dominicis, Ilaria and Cvijetić, Gregor and Willetts, Mark and Jasak, Hrvoje (2016) Enhanced Turbomachinery Capabilities for foam-extend: Development and Validation. = Enhanced Turbomachinery Capabilities for foam-extend: Development and Validation. In: 11th OpenFOAM Workshop, 26-30.06.2016., Guimarães, Portugal.
Deković, Matko (2016) Utjecaj upotrebe čelika povišene čvrstoće na strukturne dimenzije glavnog rebra tankera. = Influence of using high tensile steels in structural design of midship section of tanker for oil. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Delač, Domagoj (2016) Utjecaj parametara elektroplinskog zavarivanja na mehanička svojstva zavarenog spoja. = Effect of electrogas welding parameters on mechanical properties of welded joint. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Delić, Korana (2016) Tribološka svojstva prevučenih i neprevučenih tvrdih metala. = Tribological properties of coated and uncoated hardmetals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Deng, Shuanghui and Wang, Xuebin and Tan, Houzhang and Mikulčić, Hrvoje and Yang, Fuxin and Li, Zhifeng and Duić, Neven (2016) Thermogravimetric study on the co-combustion characteristics of oily sludge with plant biomass. = Thermogravimetric study on the co-combustion characteristics of oily sludge with plant biomass. Thermochimica acta, 633. pp. 69-76. ISSN 0040-6031. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 7.
Deur, Joško and Milutinović, Milan and Ivanović, Vladimir and Tseng, H. Eric (2016) Modeling of a dry dual clutch utilizing a lever-based electromechanical actuator. = Modeling of a dry dual clutch utilizing a lever-based electromechanical actuator. Journal of dynamic systems, measurement, and control, 138 (9). ISSN 0022-0434. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 4.
Deur, Joško and Čorić, Mirko and Xu, Li and Tseng, Eric Hongtei and Hrovat, Davor (2016) Optimization-based analysis of active suspension authority within integrated vehicle dynamics control systems. = Optimization-based analysis of active suspension authority within integrated vehicle dynamics control systems. In: 13th International Symposium on Advanced Vehicle Control, 13-16.09.2016., München, Njemačka.
Dika, Vladimir (2016) Razvoj tankostjenog plastomernog pakovanja za injekcijsko prešanje. = Development of thin-walled thermoplastic packaging for injection moulding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Godec, Damir.
Doko, Marin (2016) Proporcionalno "droop" upravljanje i koordinacija pretvarača snage spojenih na naponsku sabirnicu istosmjerne mikromreže. = Proportional droop control and coordination of power converters connected to a DC microgrid voltage bus. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Dominković, Dominik Franjo and Bačeković, Ivan and Ćosić, Boris and Krajačić, Goran and Pukšec, Tomislav and Duić, Neven and Markovska, Nataša (2016) Zero carbon energy system of South East Europe in 2050. = Zero carbon energy system of South East Europe in 2050. Applied Energy, 184. pp. 1517-1528. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 7.
Dominković, Franjo (2016) Primjena MIG postupka za aditivnu proizvodnju električnim lukom i žicom. = Application of MIG process for wire arc additive manufacturing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Domitran, Zoran and Žeželj, Dragan and Katana, Branko (2016) Utjecaj kontaktnog pritiska i brzine klizanja na temperaturu i faktor trenje u kontaktu s uzrocima od PET-a. = Influence of contact pressure and sliding speed on the temperature and coefficient of friction in sliding contact between two PET samples. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2). pp. 389-396. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Domjanić, Filip (2016) Upravljački sklop za električnu hvataljku. = Controler for electric gripper. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan and Šekoranja, Bojan.
Domović, Filip (2016) Konstrukcijsko rješenje varijatora s remenom. = Design solution of CVT with belt. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Domović, Matija (2016) Konstrukcijsko rješenje SH varijatora. = Design solution of CVT type SH. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Doračić, Borna (2016) Model reaplikacije za planiranje, razvoj i integraciju pametnih centraliziranih toplinskih sustava u pametne energetske sustave. = Reapplication model for planning, development and integration of Smart district heating systems in Smart energy system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vad Mathiesen, Brian and Krajačić, Goran.
Dorotić, Hrvoje (2016) Tehno-ekonomska analiza implementacije centraliziranog sustava grijanja na biomasu na primjeru grada Ogulina. = Techno-economic analysis of the implementation of a biomass district heating system in the City of Ogulin. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Duić, Neven (2016) Journal of Sustainable Development of Energy, Water and Environment Systems – Volume IV. = Journal of Sustainable Development of Energy, Water and Environment Systems – Volume IV. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (4). pp. 430-431. ISSN 1848-9257. Vrsta rada: Editorial. . Točan broj autora: 1.
Džolan, Ante (2016) Uređaj za otapanje potporne strukture 3D tiskanog modela. = Device for solubilization of the support structure of 3D printed model. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
El Badawi El Najjar, Rachad and Friedl, Michael and Martinec, Tomislav and Ouamer Ali, Mohamed-Islem and Partie, Marcel and Borg, Jonathan and Vajna, Sándor (2016) Distributed IPD Project-based Learning - a PhD Summer School Student's Perspective. = Distributed IPD Project-based Learning - a PhD Summer School Student's Perspective. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.
El Saleh, Adel and Žiha, Kalman and Ljubenkov, Boris and Kodvanj, Janoš (2016) Prema smanjenju neizvjesnosti proračuna strukturne pouzdanosti granične čvrstoće brodskog trupa. = Towards diminution of uncertainties in calculations of structural reliability of ultimate strength of the ship's hull. In: 22. sipmozij Teorija i praksa brodogradnje, 06-08.10.2016., Trogir, Hrvatska.
Ercegovac, Matej (2016) Konstrukcija uređaja za rektifikaciju etanola. = Design of ethanol rectification device. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Ešegović, Dominik (2016) Proračun pneumatskog prsta za zaključavanje manipulatora unutar cijevi parogeneratora. = Stress analysis of pneumatically actuated grippers on manipulator applied throughout the PWR inspection. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor and Bakić, Ante.
Fahad, Asfand and Jakšetić, Julije and Pečarić, Josip (2016) Applications of exponential convexity. = Applications of exponential convexity. Journal of Orissa Mathematical Society, 35 (1-2). pp. 47-64. ISSN 0975-2323. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Fajković, Denis (2016) Metoda transmisijske linije za analizu strujanja krvi u arterijskom stablu. = A transmission line method for the analysis of blood flow in an arterial tree. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.
Farkas, Andrea (2016) Numerička simulacija viskoznog strujanja oko trupa broda. = Numerical simulation of the viscous flow around a ship hull. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Farkas, Andrea and Degiuli, Nastia (2016) Numerička simulacija viskoznog strujanja oko modela broda. = Numerical simulation of the viscous flow around a ship model. In: 22. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta (Sorta 2016), 6-8.10.2016., Trogir-Seget Donji, Hrvatska.
Farkas, Andrea and Parunov, Joško and Katalinić, Marko (2016) Wave Statistics for the Middle Adriatic Sea. = Wave Statistics for the Middle Adriatic Sea. Pomorski zbornik, 52 (1). pp. 33-47. ISSN 0554-6397. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Fatović, Ivan (2016) Analiza postupaka razgradnje nepomičnih pučinskih proizvodnih platformi. = Analyisi of decomissioning of fixed offshore platforms. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Hadžić, Neven.
Ferlin, Simon (2016) Numerička analiza čvrstoće i stabilnosti lista kobilice male jedrilice. = Numerical analysis of keel fin for small sailing boat. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.
Ferlin, Simon and Virag, Lana and Karšaj, Igor (2016) Analiza rasta aneurizme abdominalne aorte na temelju CT snimaka. = Analysis of abdominal aortic aneurysm growth based on CT scans. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Filipović, Eugen (2016) Ispitna mjerna stanica za rashladnike kapljevine. = Testing facility for chillers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Filipović, Ivan (2016) Projektiranje i izrada bežične animatroničke šake. = The design and construction of a wireless animatronic hand. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Filipović, Petar (2016) Oblikovanje srpastih lopatica aksijalnog ventilatora. = Design of sickle blades of axial flow fan. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.
Filipović, Petar and Dominković, Dominik Franjo and Ćosić, Boris (2016) Optimization of the Public Buildings Energy Supply: The Case of the School in Koprivnica. = Optimization of the Public Buildings Energy Supply: The Case of the School in Koprivnica. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15-18.06.2016., Piran, Slovenija.
Findrik, Nick (2016) Konstrukcija mehaničkog pogona visokotlačne pumpe za ubrizgavanje goriva. = Design of mechanical drivetrain of high pressure fuel pump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Finzir, Ivica (2016) Analiza čvrstoće pojednostavljene kompozitne konstrukcije krila opterećene inercijskim silama. = Stress analysis of a simplified composite wing structure loaded with inertial loads. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Firak, Mihajlo and Đukić, Ankica (2016) Hydrogen transportation fuel in Croatia: Road map strategy. = Hydrogen transportation fuel in Croatia: Road map strategy. International journal of hydrogen energy, 41 (31). pp. 13820-13830. ISSN 0360-3199. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.
Franin, Bruno (2016) Numeričko modeliranje zaostalih naprezanja pri zavarivanju. = Numerical modelling of welding residual stresses. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.
Franičević, Marin (2016) Hidraulički sustav kompaktne vakuumske čistilice. = Hydraulic system of a compact vacuum sweeper. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Franz, Viktor (2016) Metode strateškog planiranja. = Strategic planning methods. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Frančeski, Joško (2016) Eksperimentalno i numeričko modeliranje procesa deformiranja epruvete za savijanje u tri točke. = Experimental and numerical modelling of deformation process of specimen under three-point bending test. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Fučić, Erna (2016) Mjerne tehnike vizualnih metoda nerazornih ispitivanja. = Remote visual inspection measurement techniques. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Gadžić, Andrea (2016) Numerička simulacija procesa spreja i analiza utjecaja koeficijenata modela raspadanja goriva. = Numerical simulation of spray process and parametrisation of the atomisation model coefficients. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vujanović, Milan.
Galić, Iva (2016) Svojstva i primjena piezoelektričnih keramika. = Properties and application of piezoelectric ceramics. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Galić, Ivan (2016) Konstrukcija rješenja planetarnog prijenosnika. = Design solution of planet gear. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Galjanić, Anamaria (2016) Idejni projekt hibridnog energetskog sustava putničkog broda. = Preliminary design of passenger ship hybrid system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šestan, Ante.
Garašić, Ivica and Jurica, Maja (2016) Utjecaj zaštitnih plinova na oblik spoja pri MIG/MAG zavarivanju CrNi čelika. = Influence of shielding gas on joint geometry at MIG/MAG welding of Cr - Ni steels. In: 41. Međunarodna konferencija HDTZ, Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.
Garbatov, Yordan and Parunov, Joško and Kodvanj, Janoš and Guedes Soares, Carlos (2016) Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning. = Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning. Marine Structures, 49. pp. 18-30. ISSN 0951-8339. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2016) Brze simulacije pomorstvenosti broda u OpenFOAM-u. = Rapid seakeeping simulations in OpenFOAM. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016, Split, Hrvatska.
Gatin, Inno and Vukčević, Vuko and Jasak, Hrvoje (2016) Coupling of higher order spectral method and computational fluid dynamics. = Coupling of higher order spectral method and computational fluid dynamics. In: 22. simpozij Teorija i praksa brodogradnje (Sorta 2016), 6-8.10.2016., Trogir-Seget Donji, Hrvatska.
Gazdek, Igor (2016) Uređaj za savijanje žice. = Device for wire bending. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Gašparec, Luka (2016) Primjena planova pokusa u cilju procjene sastavnica mjerne nesigurnosti. = The application of design of experiments in estimating measurement uncertainty components. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Gašparović, Goran and Kilkiş, Şiir and Krajačić, Goran and Duić, Neven (2016) Campus and Community Micro Grids Integration of Building Integrated Photovoltaic Renewable Energy Sources - Case Study of Split 3 Area, Croatia - Part A. = Campus and Community Micro Grids Integration of Building Integrated Photovoltaic Renewable Energy Sources - Case Study of Split 3 Area, Croatia - Part A. Thermal science, 20 (4). pp. 1135-1145. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Gašparović, Goran and Klarin, Branko (2016) Techno-economical analysis of replacing Diesel propulsion with hybrid electric-wind propulsion on ferries in the Adriatic. = Techno-economical analysis of replacing Diesel propulsion with hybrid electric-wind propulsion on ferries in the Adriatic. In: 2016 International Multidisciplinary Conference on Computer and Energy Science (SpliTech), 13-15.07.2016., Split, Hrvatska.
Gašparović, Sven (2016) Automatski uređaj za anatomsku prilagodbu osteosintetskih implantata u obliku trake. = Automatic device for osteosynthesis strip adjustment. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Gjuretek, Dominik (2016) Tehnologija zavarivanja aluminijskih oklopljenih sabirnica. = Welding technology of aluminium armoured collectors. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Glavan, Paola and Marinković, Bojan and Ognjanović, Zoran and Umek, Anton (2016) Correctness of the Chord Protocol. = Correctness of the Chord Protocol. In: Information and Knowledge in the Internet of Things - IIKI 2016, 20-21.10.2016., Beijing, Kina.
Gložinić, Marko (2016) Stroj za pranje krumpira. = Potato washing machine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Glumac, Milan (2016) Konstrukcija uređaja za prijenos tereta kod bepilotnih letjelica. = Design of a device for delivery drone cargo manipulation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Golubić, Dino (2016) Utjecaj položaj ruku na aerodinamičke karakteristike skijaša letača. = Aerodynamic characteristics of ski jumper influenced by position of his arms. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozmar, Hrvoje.
Gomerčić, Tomislav and Đuras, Martina and Trbojević Vukičević, Tajana and Kužir, Snježana and Alić, Ivan and Šimunović, Vedran (2016) 3D atlas privjesnog kostura konja - Sveučilišni priručnik za studente veterinarske medicine. = 3D atlas of horse bones limb. Veterinarski fakultet, Sveučilište u Zagrebu, Zagreb, -. ISBN 978-953-8006-09-8
Gorički, Danijel (2016) Elevator za transport kukuruza. = Elevator for corn transportation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Grabar, Igor (2016) Numerički proračun čvrstoće horizontalnog tlačnog spremnika za plin. = Numerical stress analysis of horizontal gas pressure tank. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.
Gracin, Leo and Režek Jambrak, Anet and Juretić, Hrvoje and Dobrović, Slaven and Barukčić, Irena and Grozdanović, Martin and Smoljanić, Goran (2016) Influence of high power ultrasound on Brettanomyces and lactic acid bacteria in wine in continuous flow treatment. = Influence of high power ultrasound on Brettanomyces and lactic acid bacteria in wine in continuous flow treatment. Applied acoustics, 103 (Part B). pp. 143-147. ISSN 0003-682X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 7.
Grbac, Mate (2016) Preinaka mjenjača brzina mopeda Tomos. = Adaptation of the gearbox of the Tomos moped. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Grdić, Alen (2016) Utjecaj prilagodbe modela podacima dimenzionalnih mjerenja kod računalne tomografije. = The impact of data fitting on dimensional computed tomography measurements. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Grdić, Ivana (2016) CMMS sustavi u održavanju zrakoplova. = CMMS systems in aircraft maintenance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Gregov, Jurica (2016) Utjecaj upotrebe čelika povišene čvrstoće na strukturne dimenzije glavnog rebra broda za prijevoz rasutog tereta. = Influence of using high tensile steel in structural design of midship section of bulk carrier. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Grgić, Domagoj (2016) Konstrukcijsko rješenje varijatora s konusnom i tanjurastom tarenicom. = Design solution of CVT with paring of conus and flat plate. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Grgić, Martina (2016) Igračka za razvijanje kognitivnih vještina. = Toy for developing of cognitive skills. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario and Kuterovac Jagodić, Gordana.
Grgurač, Ivan (2016) Primjena standarda ISO 55000 u upravljanju imovinom. = The appliaction of ISO 55000 standard in asset management. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Grilec, Hrvoje (2016) Simulacijski model proizvodnje papirne ambalaže. = Simulation model of paper packaging production. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Grlić, Danijel (2016) Mjerna sposobnost optičkog sustava za očitanje veličine otiska tvrdoće. = Measurement capability of an optical system for reading the hardness indentation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Grubić, Dominik (2016) Konstrukcija prihvata Dieselovog motora na hidrauličku kočnicu SCHENCK D400. = Design of mounting construction for implementation of Diesel engine on hydraulic dynamometer SCHENCK D400. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Grubišić, Izvor and Slapničar, Vedran and Munić, Ivan and Mudronja, Luka (2016) Pomorska baština i praktična edukacija. = Maritime heritage and hands-on education. In: 22. Simpozij Teorija i praksa brodogradnje in memoriam prof. Leopold Sorta (SORTA 2016), 06-08.10.2016., Trogir, Seget Donji.
Gruičić, Kristian (2016) Ravninski model dinamike kotača na kolniku s neravninama. = 2D model of wheel dynamics on roadway with irregularities. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kranjčević, Nenad.
Gudlin, Mihael and Hegedić, Miro and Režek, Robert and Štefanić, Nedeljko (2016) Hospital Pharmacy Layout Optimisation Using Lean Management Principles. = Hospital Pharmacy Layout Optimisation Using Lean Management Principles. In: LEAN Spring Summit 2016, 31.5.-02.06.2016., Šibenik, Hrvatska.
Gungadin, Peevesh Sharma (2016) Idejni projekt sustava za proizvodnju pare na tankeru. = Preliminary design of tanker steam production system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šestan, Ante.
Guć, Luka (2016) Eksperimentalno određivanje karakteristika modela Pelton turbine. = Experimental research of the Pelton turbine model performance curves. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šavar, Mario.
Górski, Piotr and Pospíšil, Stanislav and Kuznetsov, Sergeii and Tatara, Marcin and Marušić, Ante (2016) Strouhal number of bridge cables with ice accretion at low flow turbulence. = Strouhal number of bridge cables with ice accretion at low flow turbulence. Wind and structures, 22 (2). pp. 253-272. ISSN 1226-6116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 5.
Habulan, Marino (2016) Utjecaj nanopunila na mehanička svojstva polimernih kompozita. = Influence of nanoparticles on properties of polymer composite matrix. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Hadžić, Neven and Rudan, Smiljko and Parunov, Joško and Grubišić, Rajko (2016) Zbirka zadataka iz statičke i dinamičke analize brodskih konstrukcija. = Collection of static and dynamic problems in ship structure analysis. Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-36-5
Hadžić, Neven and Tomić, Marko and Matić, Saša (2016) Analytical methods in ship production engineering. = Analytical methods in ship production engineering. In: The 22nd Symposium on Theory and Practice of Shipbuilding, In Memoriam prof. Leopold Sorta, 6-8.10.2016., Trogir.
Hadžić, Neven and Tomić, Marko and Vladimir, Nikola and Senjanović, Ivo (2016) Neki aspekti projektiranja i gradnje velikih plutajućih aerodroma. = Some aspects of mega-floating airport design and production. Pomorski zbornik, Specia (1). pp. 81-99. ISSN 0554-6397. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Hammer, Vedran (2016) Otpornost na trošenje naplataka automobilskih kotača. = Wear resistance of automotive wheel rims. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Haraminčić, Bruno (2016) Proračun konstrukcije roštilja dvodna broda metodom konačnih elemenata. = Structural calculation of double bottom grillage using finite element method. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Prebeg, Pero.
Hegedić, Miro and Opetuk, Tihomir and Đukić, Goran and Drašković, Hrvoje (2016) Life cycle assessment of power transformer-case study. = Life cycle assessment of power transformer-case study. In: Management of Technology – Step to Sustainable Production 2016, 01.-03.06.2016., Poreč, Croatia.
Henč-Bartolić, Višnja and Bončina, Tonica and Jakovljević, Suzana and Panjan, Petar and Zupanič, Franc (2016) Damage caused by a nanosecond UV laser on a heated copper surface. = Damage caused by a nanosecond UV laser on a heated copper surface. Applied surface science, 378. pp. 357-361. ISSN 0169-4332. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.
Hećimović, Marko (2016) Hibridno hlađenje kontejnera za telekomunikacijsku opremu. = Hybrid cooling of container for telecommunication equipment. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Hild, François and Bouterf, Amine and Chamoin, Ludovic and Leclerc, Hugo and Mathieu, Florent and Neggers, Jan and Pled, Florent and Tomičević, Zvonimir and Roux, Stéphane (2016) Toward 4D mechanical correlation. = Toward 4D mechanical correlation. Advanced Modeling and Simulation in Engineering Sciences, 3 (17). pp. 1-26. ISSN 2213-7467. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 9.
Hlapčić, Filip (2016) Proračun godišnjih toplinskih karakteristika solarnog toplovodnog sustava. = Calculation of solar hot water system annual thermal performances. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Hlebec, Hrvoje (2016) Analiza sprege konstrukcijskih parametara za stroja za iskop i transport rudače ugljena uporabom DSM matrice. = Analysis of relations between design parameters for machinery for excavation and transport of ore coal using DSM matrix. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Hlevnjak, Alen (2016) Točkasto elektrootporno zavarivanje raznorodnih čelika. = Resistance spot welding of dissimilar steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Hlušička, Alex (2016) Predobradba bunarske vode bogate huminskim tvarima pomoću ozona. = Ozonation pretreatment of groundwater rich in humic substances. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.
Hoić, Matija and Hrgetić, Mario and Deur, Joško (2016) Design of a pin-on-disc-type CNC tribometer including an automotive dry clutch application. = Design of a pin-on-disc-type CNC tribometer including an automotive dry clutch application. Mechatronics, 40. pp. 220-232. ISSN 0957-4158. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Horgas, Vedran (2016) Termodifuzijski postupak boriranja čelika. = Thermo diffusion process boriding of steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Horvat, Ivan and Dović, Damir (2016) Dynamic method for calculating energy need in HVAC systems. = Dynamic method for calculating energy need in HVAC systems. Transactions of FAMENA, 40. pp. 47-62. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 2.
Horvat, Ivan and Dović, Damir (2016) Dynamic modeling approach for determining buildings technical system energy performance. = Dynamic modeling approach for determining buildings technical system energy performance. Energy conversion and management, 125. pp. 154-165. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.
Horvat, Marko (2016) Studija modela interakcije rotora i statora kod numeričkog određivanja performansi centrifugalnih pumpi. = A study of rotor-stator interaction models for numerical performance prediction of centrifugal pumps. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Horvat, Matija (2016) Analiza pokretljivosti segmenta šake kao podloga za konstruiranje bioničke proteze šake. = Analysis of hand segments mobility as a basis for bionic prosthesis hand design. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Horvat, Nino and Virag, Lana and Karšaj, Igor (2016) Analiza utjecaja mišićnih stanica na ponašanje aorte pomoću konačnih elemenata. = Analysis of smooth muscle cells influence on aorta behaviour using finite elements. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Horvat, Robert (2016) Upravljanje brizgaljkom goriva mjerenjem faktora pretička zraka te mjerenje emisije NOx u motoru s unutarnjim izgaranjem. = Control of fuel injection by measurement of excess air ratio and measurement of NOx emission from internal combustion engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Horvat, Silvestar (2016) Lijevanje kućišta filtera za plin od aluminijeve legure. = Casting of aluminium alloy gas filter housing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Horvat, Tomislav (2016) Povišenje otpornosti na adhezijsko trošenje titanove legure Ti6Al4V primjenom prevlake PACVD TiN. = Increasing resistance to adhesive wear of titanium alloy Ti6Al4V applying coating PACVD TiN. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Horvatić Novak, Amalija and Runje, Biserka (2016) Dimensional measurement with usage of computed tomography method. = Dimensional measurement with usage of computed tomography method. In: 6th International conference Mechanical technologies and structural materials 2016, 22-23.09.2016., Split, Hrvatska.
Horvatić Novak, Amalija and Runje, Biserka and Butković, Danijel (2016) Influence of geometrical magnification on computed tomography dimensional measurements. = Influence of geometrical magnification on computed tomography dimensional measurements. In: The 27th DAAAM International Symposium Intelligent Manufacturing & Automation: Focus on Sustainability, 26-29.10.2016., Mostar, Bosna i Hercegovina.
Hranilović, Matija (2016) Određivanje toplinskih karakteristika podnog konvektora. = Determination of convector thermal characteristics. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Hrgarek, Petar (2016) Mjerna nesigurnost protoka kod mjerila toplinske energije. = Measurement uncertainty of flow in heat meters. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Huklek, Marko (2016) Uporaba simulatora za obuku zavarivača. = Virtual simulator usage on welder training. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Igrec, Bojan and Bosiljevac, Marko and Šipuš, Zvonimir and Babić, Dubravko and Rudan, Smiljko (2016) Fiber-optic vibration sensor for high-power electric machines realized using 3D printing technology. = Fiber-optic vibration sensor for high-power electric machines realized using 3D printing technology. In: Photonics West 2016 - Photonic Instrumentation Engineering III, 14-19.02.2016., San Francisco, SAD.
Ilić, Dražen (2016) Optimizacija prijenosa metala za aditivnu proizvodnju električnim lukom i žicom. = Optimization of metal transfer for Wire and Arc Additive Manufacturing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Im, Hong-Il and Vladimir, Nikola and Malenica, Šime and Cho, Dae Seung and De Lauzon, Jérôme and Ryu, Hong Ryeul (2016) Hydroelastic analysis of 19000 TEU ultra large container carrier. = Hydroelastic analysis of 19000 TEU ultra large container carrier. In: 2016 Annual Spring Meeting of The Society of Naval Architects of Korea (SNAK), 19-20.05.2016., Busan (BEXCO), Korea.
Im, Hong-Il and Vladimir, Nikola and Malenica, Šime and Cho, Dae Seung and Ryu, Hong Ryeul and De Lauzon, Jérôme (2016) Ultimate strength check of HHI SkyBench™ ultra large container ship considering slamming and whipping effects. = Ultimate strength check of HHI SkyBench™ ultra large container ship considering slamming and whipping effects. In: The 13th International Symposium on Practical Design of Ships and other Floating Structures PRADS'16, 04-08.09.2016., Kopenhagen, Danska.
Ivandić, Viktorija (2016) Proces otkrivanja znanja primjenom tehnika rudarenja podataka. = Process of discovering knowledge using data mining techniques. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Ivanek, Tomislav (2016) Utjecaj parametara anodizacije aluminija na strukturu oksidne prevlake. = The influence of anodization parameters on the structure of aluminium oxide layer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stojanović, Ivan.
Ivanišević, Karlo (2016) Proračun toplinskih karakteristika toplovodnog kotla na pelete. = Thermal characteristics calculation of the hot water boiler burning pellets. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Dović, Damir.
Ivančević, Darko and Smojver, Ivica (2016) Explicit multiscale modelling of impact damage on laminated composites – Part I: Validation of the micromechanical model. = Explicit multiscale modelling of impact damage on laminated composites – Part I: Validation of the micromechanical model. Composite structures, 145. pp. 248-258. ISSN 0263-8223. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.
Ivančević, Darko and Smojver, Ivica (2016) Explicit multiscale modelling of impact damage on laminated composites – Part II: Multiscale analyses. = Explicit multiscale modelling of impact damage on laminated composites – Part II: Multiscale analyses. Composite structures, 145. pp. 259-268. ISSN 0263-8223. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.
Ivačić, Mirko (2016) Analiza integracije električne energije iz obnovljivih izvora u energetski sustav otoka Mljeta usporedbom EnergyPLAN i NEPLAN alata za energetsko planiranje. = Analysis of integration of electricity from renewable energy sources into energy system of the island of Mljet by comparison of EnergyPLAN and NEPLAN energy planning tools. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.
Išek, Marko (2016) Umjeravanje visokotlačnog pretvornika tlaka visokog razreda točnosti. = Calibration of hih pressure digital gauge of high accuracy class. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Jager, Dalibor (2016) Projektiranje laboratorijskog stola za umjeravanje plinskih mjerila tlaka. = Design of laboratory bench for calibration of gas pressue gauges. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Jakovac, Filip (2016) Karakterizacija PACVD prevlake na tvrdom metalu. = Characterization of PACVD coating on hardmetal. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Jakovljević, Matko (2016) Analiza analitičkih modela za procjenu vremena povratne vožnje transportnih sredstava. = Analysis of analytical models for evaluation of empty travel time of transporters. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Jakovljević, Suzana (2016) Materials and hip in hip replacement. = Materials and hip in hip replacement. In: HIP A la Carte, 02-03.04.2016., Pula, Hrvatska.
Jakšetić, Julije and Naeem, Rishi and Pečarić, Josip (2016) Exponential convexity for Jensen’s inequality for norms. = Exponential convexity for Jensen’s inequality for norms. Journal of inequalities and applications, 2016 (54). pp. 1-8. ISSN 1029-242X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 3.
Jakšetić, Julije and Pečarić, Josip and Kalamir Smoljak, Ksenija (2016) Some measure theoretic aspects of Steffensen's and reversed Steffensen's inequality. = Some measure theoretic aspects of Steffensen's and reversed Steffensen's inequality. Journal of Mathematical Inequalities, 10 (2). pp. 459-469. ISSN 1846-579X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 3.
Jakšetić, Julije and Pečarić, Josip and Smoljak Kalamir, Ksenija (2016) Measure theoretic generalization of Pečarić, Mercer and Wu-Srivastava results. = Measure theoretic generalization of Pečarić, Mercer and Wu-Srivastava results. Sarajevo journal of mathematics, 12(24) (1). pp. 33-49. ISSN 1840-0655. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Jakšetić, Julije and Soldo, Robert (2016) Zadaci iz matematike s državne mature 2015. u Južnoj Koreji (viša razina). = Suneung-mathematical problems (higher level). Matematičko fizički list, 263. pp. 205-214. ISSN 1332-1552. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Jalušić, Boris (2016) Bezmrežna numerička metoda za modeliranje heterogenih materijala. = Meshless numerical method for modeling of heterogeneous materials. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sorić, Jurica.
Jalušić, Boris and Jarak, Tomislav and Sorić, Jurica (2016) Bezmrežno modeliranje konstrukcija primjenom gradijentne elastične teorije. = Meshless modeling of structures using strain gradient theory. In: Sedmi susret Hrvatskog društva za mehaniku, 16.-17.6.2016., Split, Hrvatska.
Jalušić, Boris and Sorić, Jurica and Jarak, Tomislav (2016) Mixed Meshless Local Petrov-Galerkin Collocation Method for Modeling of Material Discontinuity. = Mixed Meshless Local Petrov-Galerkin Collocation Method for Modeling of Material Discontinuity. Computational mechanics, 1. pp. 1-19. ISSN 0178-7675. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 3. (In Press)
Janković, Danijel (2016) Kontrolni proračun naprezanja zavarene čelične boce za ukapljeni plin. = Control stress analysis of welded steel liquid gas tank. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.
Jarak, Tomislav and Sorić, Jurica (2016) Bezmrežna mješovita MLPG metoda za rješavanje diferencijale jednadžbe visokog reda. = Meshless mixed MLPG method for solving diferential equations of high order. In: Sedmi susret Hrvatskog društva za mehaniku, 16.-17.6.2016., Split, Hrvatska.
Jasak, Hrvoje and Cvijetić, Gregor (2016) Implementation and validation of the harmonic balance method for temporally periodic non–linear flows. = Implementation and validation of the harmonic balance method for temporally periodic non–linear flows. In: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, 13-17.06.2016., Seul, Južna Koreja.
Jačan, Jurica (2016) Ispitivanje otpornosti na erozijsko trošenje tvrdih prevlaka proizvedenih PACVD postupkom. = Erosion wear testing of hard coatings produced by PACVD process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Jačan, Jurica and Landek, Darko (2016) Ispitivanje otpornosti na erozijsko trošenje tvrdih prevlaka proizvedenih PACVD postupkom. = Erosion wear testing of hard coatings produced by PACVD process. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.
Jelić, Ivan (2016) Projekt sustava klimatizacije i hlađenja restorana. = Design of air-conditioning and cooling system for restaurant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smoljan, Darko.
Jerčić, Luka (2016) Hidraulički uređaj za zakretanje kobilice jedrilice. = Hydraulic device for swivelling of the sailboats keel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Jokić, Andrej and Nakić, Ivica (2016) On additive Lyapunov functions and existence of neutral supply rates in acyclic LTI dynamical networks. = On additive Lyapunov functions and existence of neutral supply rates in acyclic LTI dynamical networks. In: 22nd International Symposium on Mathematical Theory of Networks and Systems, 12-15.07.2016., Minneapolis, SAD.
Jokić, Denis (2016) Procjena mjerne nesigurnosti rezultata statičkog vlačnog ispitivanja. = Estimation of measuring uncertenty for results of static tensile testing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Jokić, Marko and Jokić, Andrej and Dogančić, Bruno (2016) Structured spatial discretization of dynamical systems. = Structured spatial discretization of dynamical systems. In: VII European Congress on Computational Methods in Applied Sciences and Engineering, 05-10.06.2016., Kreta, Grčka.
Josipović, Franjo (2016) Katastar emisija necestovnih pokretnih strojeva. = Emission inventory of non road mobile machineries. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Jovan, Ivica (2016) Određivanje utjecaja bočnog nagiba na silu otpora trupa jedrilice klase Optimist. = Determination of influence of roll angle on drag force of sail-boat class Optimist hull. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krizmanić, Severino.
Jozić, Ante (2016) Konstrukcijsko rješenje La Filiere Unicum varijatora. = Design solution of La Filiere Unicum CVT. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Juraga, Ivan and Alar, Vesna and Šimunović, Vinko and Stojanović, Ivan (2016) Prikaz korozijskih oštećenja zavarenih spojeva nehrđajućih čelika. = Overview of stainless steel welded joints corrosion failures. In: 41. Međunarodna konferencija HDTZ, Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.
Juraga, Ivan and Stojanović, Ivan and Kovač, Andrea (2016) Zaštita podvodnog dijela brodskog trupa premazima. = Underwater ship hull coating system. In: 22. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta, 06-08.10.2016., Trogir, Hrvatska.
Juranić, Jasmin and Marjanović, Dorian and Pavković, Neven (2016) Risks in product development: Advancements in recent years. = Risks in product development: Advancements in recent years. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.
Juratović, Vladimir (2016) Integracija vjetroelektrana u energetski sustav Republike Hrvatske. = Integration of wind power plants into Croatian power system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.
Juretić, Hrvoje and Cajner, Hrvoje and Smoljanić, Goran and Ahac, Igor and Ljubas, Davor (2016) Optimiranje koagulacijske predobrade sirove bunarske vode bogate prirodnim organskim tvarima. = Optimization of coagulation pretreatment of raw groundwater rich in natural organic matter. In: II. međunarodni i VI. hrvatski znanstveno-stručni skup Voda za sve, 18.03.2016., Osijek, Hrvatska.
Jurić, Filip (2016) Numerička simulacija procesa spreja i izgaranja. = Numerical modelling of spray and combustion process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vujanović, Milan.
Juriša, Jurica (2016) Konstrukcija četverobrzinskog reduktora za natjecanje Formula student. = Design of a four speed gear transmission for the FSAE competition. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Jurković, Karlo (2016) Reparaturno zavarivanje sivog lijeva. = Repair wlding of gray cast iron. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Jurčević, Marjan (2016) Rutiranje visokoregalnog viličara komisionera u zoni s više prolaza. = Routing of high rack order-picking truck in multi-aisle zone. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Jušić, Dario (2016) Alternativni pogon daske za jedrenje. = Alternative drive for a sailboard. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Kamenar, Jelena (2016) Biomehanički model ljudske šake za rehabilitaciju pacijenata s parezom prstiju. = Biomechanical model of human hand for rehabilitation of patients with finger paresis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Kapo, Faruk (2016) Oblikovanje i 3D printanje implantata "skela" od trikalcij-fosfata. = Designing and 3D printing of tissue scaffolds made of tricalcium phosphate. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, Vienna University of Technology, Institute of Materials Science and Technology. Mentor: Jurčević Lulić, Tanja and Stampfl, Jürgen.
Kasać, Josip and Žilić, Tihomir and Milić, Vladimir and Jokić, Andrej and Lobrović, Mihael (2016) Robust decentralized global asymptotic tracking control of a class of nonlinear mechanical systems. = Robust decentralized global asymptotic tracking control of a class of nonlinear mechanical systems. In: 2016 American Control Conference, ACC 2016, 06-08.07.2016., Boston, SAD.
Katavić, Josip (2016) Poboljšanje slike strujanja u tarnoj pumpi. = Improvement of flow pattern in friction pump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krizmanić, Severino.
Katić, Marko and Baršić, Gorana and Mihaljević, Morana (2016) Comparison of results obtained using Coordinate Measuring Machine, Computed Radiography and Computed Tomography. = Comparison of results obtained using Coordinate Measuring Machine, Computed Radiography and Computed Tomography. In: Annual Meeting on Computed Tomography, 09-12.02.2016., Wels, Austria.
Katulić, Stjepko (2016) Poboljšanje termodinamičke iskoristivosti parnoturbinskog dijela kombiniranog postrojenja primjenom organskih radnih medija. = Thermodynamic efficiency improvement of combined power plant's bottom cycle by using organic working fluids. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.
Kekez, Marko (2016) Razvoj ovjesa bolida Formule Student. = Development of Formula Student race car suspension system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šagi, Goran.
Kelin, Krešimir (2016) Utjecaj šaržiranja dijelova na debljinu i prionjivost PACVD prevlaka. = The influence of part batching on the adhesion and thickness of PACVD coatings. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Keran, Zdenka and Piljek, Petar and Ciglar, Damir (2016) Metal Forming Similarity Theory in Numerical Simulations. = Metal Forming Similarity Theory in Numerical Simulations. Journal for technology of plasticity, 41 (1). pp. 38-45. ISSN 0354-3870. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Keran, Zdenka and Piljek, Petar and Ciglar, Damir (2016) Metal forming similarity theory in numerical simulations. = Metal forming similarity theory in numerical simulations. Journal for technology of plasticity, 41 (1). pp. 38-45. ISSN 0354-3870. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Kerekeš, Nikola (2016) Tribološka analiza materijala cijevi jurišne puške. = Tribologycal analysis of assault rifle barrel materials. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakopčić, Mirko.
Kereković, Snježana (2016) Višeznačnost u jeziku struke. = Polysemy in language for specific purposes. In: Međunarodni znanstveni skup HDPL-a Metodologija i primjena lingvističkih istraživanja, 24-26.04.2015., Zadar, Hrvatska.
Kereković, Snježana and Hudeček, Lana and Mihaljević, Milica (2016) Skupine imenica + imenica u genitivu i pridjev + imenica u znanstvenome nazivlju. = Word combinations head noun + genitive noun and adjective + noun in Croatian scientific terminology. Jezikoslovlje, 17 (1-2). pp. 145-168. ISSN 1331-7762. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Kerolli-Mustafa, Mihone and Mandić, Vilko and Ćurković, Lidija and Šipušić, Juraj (2016) Investigation of thermal decomposition of jarosite tailing waste - A prerequisite for comprehensive jarosite reuse and waste minimization. = Investigation of thermal decomposition of jarosite tailing waste - A prerequisite for comprehensive jarosite reuse and waste minimization. Journal of thermal analysis and calorimetry, 123 (1). pp. 421-430. ISSN 1388-6150. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.
Kerolli-Mustafa, Mihone and Ćurković, Lidija (2016) Analysing the characteristics and application potentials of jarosite waste in kosovo. = Analysing the characteristics and application potentials of jarosite waste in kosovo. Global NEST Journal, 18 (1). pp. 89-97. ISSN 1790-7632. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 2.
Keser, Robert (2016) Blok-spregnuti algoritam za dvo-jednadžbene modele turbulencije. = Block-Coupled Solution Algorithms for 2-equation Turbulence Models. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Kežman, Tomislav (2016) Stroj za ljuštenje krumpira. = Potato peeling machine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Kim, Jang Whan and Jang, Hyunchul and Baquet, Aldric and O'Sullivan, Jim and Lee, Sungwok and Kim, Booki and Jasak, Hrvoje (2016) Technical and Economic Readiness Review of CFD-Based Numerical Wave Basin for Offshore Floater Design. = Technical and Economic Readiness Review of CFD-Based Numerical Wave Basin for Offshore Floater Design. In: Offshore Technology Conference, 2-5.5.2016., Houston, TX, USA.
Kitarović, Stanislav and Andrić, Jerolim and Pirić, Karlo (2016) Hull girder progressive collapse analysis using iacs prescribed and nlfem derived load - end shortening curves. = Hull girder progressive collapse analysis using iacs prescribed and nlfem derived load - end shortening curves. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 67 (2). pp. 115-128. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Kišić, David (2016) Analiza kretnji gornjeg dijela tijela pri rotaciji oko vertikalne osi kao podloga za konstrukciju trenažera trupa. = Analysis of the upper body movement in vertical axis rotation as the basis for the trunk trainer design. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Klanac, Andrija (2016) Optimizacija sustava grijanja stambene zgrade. = Optimization of heating system for residential building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Klobčar, Damjan and Tušek, Janez and Bizjak, Milan and Bušić, Matija (2016) Effect of tig welding with and without active flux on the properties of aisi 304 welded joints. = Effect of tig welding with and without active flux on the properties of aisi 304 welded joints. In: Zavarivanje - Welding 2016, 08. - 11. 06. 2016., Opatija, Hrvatska.
Knezović, Ivan (2016) Karakterizacija metalnih kompozita pomoću računalne tomografije. = Characterisation of metal matrix composites by use of the computer tomography. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Ko, Donghyeong and Park, Junseok and Im, Hong-Il and Jung, Byoung-Hoon and Vladimir, Nikola (2016) Springing effect on fatigue assessment of HHI SkyBench™ ultra large container ships. = Springing effect on fatigue assessment of HHI SkyBench™ ultra large container ships. In: 26th International Ocean and Polar Engineering Conference - ISOPE 2016, 26.06.-01.07.2016., Rodos, Grčka.
Kocelj, Mato (2016) Ublažavanje udarca klipa hidrauličkog cilindra na završetku hoda. = End-stroke damping of piston of hydraulic cylinder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.
Kodba, Bruno (2016) Utjecaj vlažnosti biomase na pogon postrojenja. = Impact of biomass moisture on plant operation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Kokić, Mia (2016) Hvatanje predmeta u slobodnom letu robotom. = Catching object in free fly by robot. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Kolega, Vesna and Mehadžid, Mihaela and Maras, Hrvoje and Rajić, Karlo and Šimek, Tijana and Domac, Julije and Latković, Žarko and Novosel, Tomislav and Barbarić, Marina and Matak, Nikola and Doračić, Borna and Pukšec, Tomislav and Krajačić, Goran and Guzović, Zvonimir and Duić, Neven (2016) Revizija Akcijskog plana energetski održivog razvitka Grada Karlovca. = Revision of the City of Karlovac Sustainable Energy Action Plan. UNSPECIFIED.
Kolovrat, Petar (2016) Upravljanje inverznim rotacijskim njihalom. = Control of rotary inverted pendulum. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.
Komušanac, Ivan and Ćosić, Boris and Duić, Neven (2016) Impact of high penetration of wind and solar PV generation on the country power system load: the case study of Croatia. = Impact of high penetration of wind and solar PV generation on the country power system load: the case study of Croatia. Applied energy, 184. pp. 1470-1482. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Kovarik, Borna (2016) Izrada nelinearnog frekvencijski ovisnog modela dinamičke krutosti nosača motora. = Modeling of the nonlinear frequency dependent engine mount dynamic stiffness. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Kovač, Mia (2016) Karakterizacija biokompozita primjenom skenirajućeg elektronskog mikroskopa. = Characterization of biocomposite in application of scaning electron microscopy. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.
Kovaček, Danijel (2016) Projektiranje robotske didaktičke stanice. = Design of didactic robot cell. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Kovačević, Franko (2016) Analiza čvrstoće različitih topoloških rješenja konstrukcije broda za prijevoz žive stoke. = Structural analysis of different topology concepts of livestock carrier ship. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Andrić, Jerolim.
Kovačević, Mario (2016) Mjerenje brzine ultrazvuka u radnim etalonima. = Ultrasonic velocity measurements in calibration blocks. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Markučič, Damir.
Kovačić, Luka (2016) Numeričko modeliranje sklopa uvlačive kobilice za malu jedrilicu. = Numerical modeling of lifting keel assembly for small sailing boat. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jarak, Tomislav.
Kovačić, Luka and Jarak, Tomislav (2016) Utjecaj raspodjele i udjela pojedinih slojeva na odziv laminatne konstrukcije. = Influence of layers pattern on the response of laminar structure. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.6.2016., Split, Hrvatska.
Kovačić, Saša and Cajner, Franjo and Landek, Darko (2016) Influence of steel substrate on the properties of PACVD gradient multilayer TiCN coating. = Influence of steel substrate on the properties of PACVD gradient multilayer TiCN coating. In: 3rd Mediterranean Conference on Heat Treatment and Surface Engineering, 26-28.09.2016., Portorož, Slovenija.
Kozarac, Darko and Taritaš, Ivan and Vuilleumier, David and Saxena, Samveg and Dibble, Robert W. (2016) Experimental and numerical analysis of the performance and exhaust gas emissions of a biogas/n-heptane fueled HCCI engine. = Experimental and numerical analysis of the performance and exhaust gas emissions of a biogas/n-heptane fueled HCCI engine. Energy (Oxford), 115 (1). pp. 180-193. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.
Kozmar, Hrvoje and Allori, Davide and Bartoli, Gianni and Borri, Claudio (2016) Complex terrain effects on wake characteristics of a parked wind turbine. = Complex terrain effects on wake characteristics of a parked wind turbine. Engineering structures, 110. pp. 363-374. ISSN 0141-0296. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Kozmar, Hrvoje and Babić, Nevio and Večenaj, Željko and Horvath, Kristian and De Wekker, Stephan F. J. and Grisogono, Branko (2016) On turbulent fluxes during strong winter bora wind events. = On turbulent fluxes during strong winter bora wind events. Boundary - layer meteorology, 158 (2). pp. 331-350. ISSN 0006-8314. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 6.
Kozmar, Hrvoje and Buljac, Andrija and Džijan, Ivo (2016) Aerodynamic performance of the underbody and wings of an open-wheel race car. = Aerodynamic performance of the underbody and wings of an open-wheel race car. Transactions of FAMENA, 40 (2). pp. 19-34. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 3.
Kozmar, Hrvoje and Buljac, Andrija and Džijan, Ivo and Korade, Ivan and Krizmanić, Severino (2016) Automobile aerodynamics influenced by airfoil- shaped rear wing. = Automobile aerodynamics influenced by airfoil- shaped rear wing. International journal of automotive technology, 17 (3). pp. 377-385. ISSN 1229-9138. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 5.
Kozmar, Hrvoje and Buljac, Andrija and Pospišil, Stanislav and Kuznetsov, Sergey and Kral, Radomil (2016) Flutter derivatives of the Kao-Pin Hsi cable-supported bridge. = Flutter derivatives of the Kao-Pin Hsi cable-supported bridge. Applied Mechanics and Materials, 821. pp. 172-179. ISSN 1660-9336. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Kozmar, Hrvoje and Buljac, Andrija and Pospíšil, Stanislav and Macháček, Michael and Král, Radomil (2016) Dynamic stability of the Golden Gate Bridge deteriorated by roadway wind barriers. = Dynamic stability of the Golden Gate Bridge deteriorated by roadway wind barriers. In: 8th International Colloquium on Bluff Body Aerodynamics and Applications, 07-11.06.2016., Northeastern University, Boston, Massachusetts, SAD.
Kozmar, Hrvoje and Liščić, Božidar and Hadžić, Neven and Čorić, Većeslav and Tomić, Marko (2016) Pučinska vjetroelektrana u Jadranskom moru - mogućnosti za hrvatsko gospodarstvo. = Offshore wind power plant in the Adriatic Sea - An opportunity for the Croatian economy. In: Hrvatska prirodna bogatstva. Hrvatska akademija znanosti i umjetnosti, Zagreb, pp. 27-44. ISBN 978-953-347-090-0
Krajačić, Goran and Duić, Neven and Vujanović, Milan and Kılkış, Şiir and Rosen, Marc A. and Al-Nimr, Moh’d Ahmad (2016) Sustainable development of energy, water and environment systems for future energy technologies and concepts. = Sustainable development of energy, water and environment systems for future energy technologies and concepts. Energy Conversion and Management, 125. pp. 1-14. ISSN 0196-8904. Vrsta rada: Editorial. Kvartili JCR: Q1 (2016). Točan broj autora: 6.
Krajinović, Matej (2016) Zamjena radne tvari HCFC-22 s propanom R-290 u split rashladnom uređaju. = Retrofitting of R-22 split air-conditioner with natural refrigerant propane (R-290). Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.
Krajna, Tamara and Matković Mikulčić, Katica and Mišetić, Marijana and Raos, Nevia (2016) Librarian and professional ethics in Croatia. = Librarian and professional ethics in Croatia. In: Libraries V4 in the Decoy of Digital Age = Knihovny zemí V4 v nástrahách digitálního věku, 31.05-01.06.2016., Brno, Češka.
Krajnović, Josip (2016) Razvoj programskog alata za simulaciju i analizu performansi bolida Formula Student. = Development of a vehicle performance simulation and analysis tool for Formula Student race car. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Kralj, Petra (2016) Primjena ergonomskih parametara pri utvrđivanju položaja vozača sportskog automobila. = Ergonomic parameters utilization in determination of sports car driver position. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Kralj, Tomislav (2016) Spremnik ukapljenog naftnog plina. = Tank for the storage of liquefied petroleum gas. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Kraljić, Neven (2016) Robotska proizvodnja prirodne i kupcu posebno prilagođene kozmetike. = Robot production of natural and personalised cosmetic. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Kranželić, Josip (2016) Primjena lijepljenja za spajanje metala. = Application of adhesion bonding in metal joining. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Krešimir, Duvnjak (2016) Analiza i usporedba numeričkih metoda pri rješavanju biharmonijske jednadžbe. = Analysis and comparison of numerical methods for solving biharmonic equation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.
Kristović, Pietro (2016) Modeliranje i regulacija tokova snage zemaljske elektrane sustava za eksploataciju energije vjetra na velikim visinama. = Power flow modeling and control of a high altitude wind energy system ground station powerplant. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Krizmanić, Luka (2016) Ispitivanje termostatiranih mjeriteljskih kupelji. = Testing of thermostatic metrology baths. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Krizmanić, Petar (2016) Postupak ispitivanja dimnih plinova. = Tesiting of flue gas. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Krišto, Mate (2016) TIG zavarivanje martenzitnog čelika X3CrNiMo13-4. = TIG welding of martensitic steel X3CrNiMo13-4. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Križanović, Ivan (2016) Ispune zuba u dentalnoj biomehanici. = Intracoronal restoration in dental biomecanics. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Krmelić, Nikola (2016) Matematički model plinske turbine u TETO Sisak. = Mathematical model of power plant Sisak gas turbine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.
Krpan, Stjepan (2016) Sustav za ispitivanje mjerila toplinske energije. = System for testing of heat meters. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Krznar, Nino (2016) Rekonstrukcija 3D pisača za dobavu materijala u obliku granulata kod postupka taložnog očvršćivanja. = Redesign of 3D printer for material supply in the form of granulate in the fused deposition modeling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.
Krznar, Nino and Pilipović, Ana and Šercer, Mladen (2016) Additive manufacturing of fixture for automated 3D scanning - case study. = Additive manufacturing of fixture for automated 3D scanning - case study. Procedia Engineering, 149. pp. 197-202. ISSN 1877-7058. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Kudeljan, Valentino (2016) Maksimiziranje korištenja otpadne topline iz industrijskih zona korištenjem ''Total Site'' metode. = Maximising of waste heat recovery of industrial regions using Total Site approach. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran and Boldyryev, Stanislav.
Kumić, Ivan (2016) Novi postupak difuzijskoga modificiranja površina titanove legure za endoprotetske implantate. = New surface diffusion modification process for endoprosthetic bone implants titanium alloy. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Matijević, Božidar.
Kurtoić, Matija (2016) Rekonstrukcija alata i prihvata na manipulatoru. = Adaptation of the tool and the tool holder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Kuzmić, Nikola (2016) Idejno rješenje uređaja za ispitivanje kompozitnih vratila. = Design concept of a testing device for composite shafts. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Kuznetsov, Sergey and Pospíšil, Stanislav and Macháček, Michael and Michalcová, Vladimíra and Uruba, Václav and Jonáš, Pavel and Kozmar, Hrvoje (2016) Experimental modelling of stratification effects for atmospheric boundary layer using wind tunnel simulation. = Experimental modelling of stratification effects for atmospheric boundary layer using wind tunnel simulation. In: 8th International Colloquium on Bluff Body Aerodynamics and Applications, 07-11.06.2016., Northeastern University, Boston, Massachusetts, SAD.
Kuznetsov, Sergey and Pospíšil, Stanislav and Michalcová, Vladimíra and Kozmar, Hrvoje (2016) Wind-tunnel simulation of the thermally stratified atmospheric boundary layer in complex terrain. = Wind-tunnel simulation of the thermally stratified atmospheric boundary layer in complex terrain. In: 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 11.-13.07.2016., Malaga, Španjolska.
Kuznetsov, Sergey and Ribičić, Matko and Pospíšil, Stanislav and Plut, Mihael and Trush, Arsenii and Kozmar, Hrvoje (2016) Flow and turbulence in the boundary layer wind tunnel controlled using various hardware devices. = Flow and turbulence in the boundary layer wind tunnel controlled using various hardware devices. In: 8th International Colloquium on Bluff Body Aerodynamics and Applications, 07.-11.06.2016., Northeastern University, Boston, Massachusetts, SAD.
Kučinić, Damir (2016) Dimenzioniranje, modeliranje i simulacija servo-hidrauličke pumpe. = Dimensioning, modelling and simulation of servo-hydraulic pump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.
Kušen, Vanja (2016) Iskorištavanje tla kao toplinskog spremnika u sustavu geotermalnih dizalica topline. = Utilization of soil as a heat source for the ground coupled heat pump system. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.
Kušmišević, Matija (2016) Potpora odlučivanju kod razrade projekta ˝Car Sharing˝. = Decision support in project development for Car Sharing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Ladavac, Andrea (2016) Zaštitna svojstva praškaste prevlake na aluminiju. = Protection properties of powder coating applied on aluminium structures. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stojanović, Ivan.
Laješić, Filip (2016) Projekt komore za umjeravanje mjerila relativne vlažnosti. = Design of the relative humidity test chamber. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Larma, Marijana (2016) Primjena digitalne korelacije slike za separaciju modova kod loma kompozitne konstrukcije pri mješovitom opterećenju. = Application of digital image correlation to determine mode partitioning in mixed-mode fracture of composite structure. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, University College Dublin, school of Mechanical and Materials Engineering. Mentor: Tuković, Željko and Ivanković, Alojz.
Leko, Tomislav (2016) Automatsko otključavanje vrata s evidencijom ulazaka. = Automatic door unlock with entries recording. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Crneković, Mladen.
Leljak, Borna (2016) Naprava za injekcijsko prešanje manjih polimernih dijelova. = Device for injection moulding small plastic parts. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Leljak, Vlatko (2016) Izrada tvorevine postupkom taložnog očvršćivanja s više pokretnih dijelova u jednom ciklusu. = Production of multi part product in one cycle with fused deposition modeling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.
Leljak, Zvonimir (2016) Kalibracija vizijskog sustava korištenjem virtualne projekcije. = Calibration of vision system using virtual projection. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan and Šuligoj, Filip.
Lepri, Petra and Večenaj, Željko and Kozmar, Hrvoje and Grisogono, Branko (2016) Seasonal variability of near-ground Bora turbulence. = Seasonal variability of near-ground Bora turbulence. In: 8th International Colloquium on Bluff Body Aerodynamics and Applications, 07.-11.06.2016., Northeastern University, Boston, Massachusetts, SAD.
Lesičar, Tomislav and Sorić, Jurica and Tonković, Zdenko (2016) Large strain, two-scale computational approach using C1 continuity finite element employing a second gradient theory. = Large strain, two-scale computational approach using C1 continuity finite element employing a second gradient theory. Computer methods in applied mechanics and engineering, 298. pp. 303-324. ISSN 0045-7825. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2016) Measure of nonlocal response in multiscale gradient modeling. = Measure of nonlocal response in multiscale gradient modeling. In: 15th International Conference on Fracture and Damage Mechanics, FDM 2016, 14.-16.09.2016., Alicante; Spain.
Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2016) Računalna homogenizacija drugog reda uz primjenu gradijentne teorije na mikrorazini. = Second-order homogenization based on gradient theory at the microlevel. In: Sedmi susret Hrvatskog društva za mehaniku, 16.-17.06.2016., Split, Hrvatska.
Lesičar, Tomislav and Tonković, Zdenko and Sorić, Jurica (2016) Second-Order Computational Homogenization Approach Using Higher-Order Gradients at Microlevel. = Second-Order Computational Homogenization Approach Using Higher-Order Gradients at Microlevel. In: 14th International Conference on Fracture and Damage Mechanics, FDM 2015, 23.-23.09.2015., Budva; Montenegro.
Levak, Gabrijel (2016) Modeliranje zatvaranja zaklopke i predvišanje pojave hidrauličkog udara. = Modeling closing swing check valve and prediction of resulting water hammer. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Džijan, Ivo.
Li, Shuaishuai and Liu, Zihan and Wang, Xuebin and Adeosun, Adewale and Vujanović, Milan and Tan, Houzhang and Duić, Neven and Mikulčić, Hrvoje (2016) Kinetics study on the effect of oxygen concentration on soot oxidation in O2 / Co2 atmosphere at high temperatures. = Kinetics study on the effect of oxygen concentration on soot oxidation in O2 / Co2 atmosphere at high temperatures. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran.
Lijović, Ivan (2016) Traktorski priključak za vađenje krumpira. = Tractor mounted potato harvester. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Lisičak, Ivan (2016) Primjena programa Visual-Weld 11.0 za određivanje optimalne temperature predgrijavanja. = Application of Visual-Weld 11.0 software for determination of optimal preheat temperature. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Lisjak, Nikola (2016) Aerodinamička optimizacija oblika pomoću površinske osjetljivosti korištenjem jednadžbi kontinuiranog adjointa. = Aerodynamic Shape Optimisation Based on Adjoint Surface Sensitivities. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Ličina, Igor (2016) Baza podataka za podršku i praćenje razvojnih projekata. = Database for support and tracing of product development projects. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Liščić, Božidar and Matijević, Božidar and Totten, George Edward and Canale, Lauralice de C.F. (2016) Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil and Canola Oil Based on Temperature Gradients. = Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil and Canola Oil Based on Temperature Gradients. In: The 5th Asian Conference on Heat Treatment and Surface Engineering, 12-14.11.2016., Hangzhou, China.
Liščić, Božidar and Totten, George Edward and Canale, Lauralice de C.F. and Matijević, Božidar (2016) A New Probe to Measure and Evaluate the Real Quenching Intensity Based on Temperature Gradients. = A New Probe to Measure and Evaluate the Real Quenching Intensity Based on Temperature Gradients. In: 23rd IFHTSE CONGRESS, 18-21.04.2016., SAVANNA H, GEORGIA, USA.
Lojen, Stjepan (2016) Primjena heurističkih metoda u mjeriteljstvu. = The use of heuristic methods in metrology. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Lokas, Lea and Runje, Biserka and Alar, Vesna (2016) Evaluation of measurement uncertainty in electrochemical test methods. = Evaluation of measurement uncertainty in electrochemical test methods. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.
Lončar, Ivan (2016) Eksperimentalno određivanje otpora plovila na ljudski pogon. = Experimental determination of the hzman powered craft resistance. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Lončarević, Šimun (2016) Akreditacija postupka ispitivanja motora s unutarnjim izgaranjem. = Accreditation of the process of testing internal combustion engines. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Ložar, Viktor and Slapničar, Vedran (2016) Solution for inter-connecting and supplying Adriatic islands. = Solution for inter-connecting and supplying Adriatic islands. In: SORTA 2016, 6-8.10.2016., Trogir, Seget Donji, Hrvatska.
Lukač, Sandro (2016) Razrada nove metode umjeravanja etalona debljine u Nacionalnom laboratoriju za duljinu. = Development of new method for calibration of feeler gauges in National Laboratory for Length. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Baršić, Gorana.
Lukšić, Domagoj (2016) Konstrukcijsko riješenje varijatora s dvije konusne tarenice. = Design solution of CVT with two conus. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Lulić, Ivan (2016) Primjena TPM-a u opskrbi zrakoplova gorivom. = Application of TPM in the fuel supply of aircraft. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Lund, Henrik and Duić, Neven and Østergaard, Poul Alberg and Mathiesen, Brian Vad (2016) Smart Energy Systems and 4th Generation District Heating. = Smart Energy Systems and 4th Generation District Heating. Energy, 110. pp. 1-4. ISSN 0360-5442. Vrsta rada: Editorial. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Macura, Vladimir (2016) Ispitivanje korozijske postojanosti PACVD prevlaka na alatnim čelicima za topli rad. = Corrosion testing of the PACVD coatings deposited on hot work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Mahović Poljaček, Sanja and Tomašegović, Tamara and Cigula, Tomislav and Donevski, Davor and Jakovljević, Suzana (2016) Accelerated Aging of Photopolymeric Material used in Flexography. = Accelerated Aging of Photopolymeric Material used in Flexography. In: ICMIME 2016: 18th International Conference on Materials, Industrial, and Manufacturing Engineering, 11.-12.4. 2016., Venecija, Italija.
Majdak, Ivan (2016) Korozijska postojanost nanostrukturiranih tvrdih metala. = Corrosion resistance of nanostructured hardmetals. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Majdak, Ivan and Alar, Željko (2016) Korozijska postojanost nanostrukturiranih tvrdih metala. = Corrosion stability of nanostructured hardmetals. In: MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.
Majetić, Dubravko and Brezak, Danko and Kasać, Josip (2016) Zbirka zadataka iz teorije automatskog upravljanja - Jednovarijabilni sustavi. = Collection of problems in control theory: Single-Input Single-Output systems. Udžbenici Sveučilišta u Zagrebu . Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-37-2
Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2016) Zbirka zadataka iz teorije automatskog upravljanja - Viševarijabilni sustavi. = Collection of problems in control theory: Multivariable systems. Udžbenici Sveučilišta u Zagrebu . Fakultet strojarstva i brodogradnje, Zagreb, -. ISBN 978-953-7738-38-9
Majić Renjo, Marijana (2016) Poboljšanje svojstava Al2O3 keramike dodatkom nanočestica ZrO2. = The improvement of Al2O3 ceramics properties by the addition of ZrO2 nanoparticles. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Majić Renjo, Marijana and Ćurković, Lidija and Grilec, Krešimir and Šokčević, Zrinka (2016) Wear performance of slip cast monolithic and composite ceramics. = Wear performance of slip cast monolithic and composite ceramics. In: The 48th International October Conference on Mining and Metallurgy, 28.09.-01.10.2016., Bor, Srbija.
Malić, Mile (2016) Rezultati mjerenja rada na geotermalnoj dizalici topline u režimu hlađenja. = Measured results during cooling mode of the ground source heat pump operation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Mance, Marko (2016) Modeliranje i regulacija pogona električnog vozila opremljenog hibridnim baterijsko-ultrakondenzatorskim sustavom za pohranu energije. = Modeling and control of electric vehicle powertrain equipped with battery-ultracapacitor energy storage system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Mandić, Marko (2016) Planiranje razvoja proizvoda u automobilskoj industriji. = A tool for product development planning in the automotive industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Marjanović, Dorian.
Marchetti-Deschmann, Martina and Ranić, Jelena and Kurtović, Tihana and Prebeg, Pero and Brgles, Marija and Allmaier, Günter and Halassy, Beata (2016) Optimization of tetanus toxoid ammonium sulfate precipitation process using response surface methodology. = Optimization of tetanus toxoid ammonium sulfate precipitation process using response surface methodology. Preparative Biochemistry and Biotechnology, 46 (7). pp. 695-703. ISSN 1082-6068. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 7.
Marinović, Veronika and Ljubas, Davor and Ćurković, Lidija (2016) Effects of concentration and UV radiation wavelengths on photolytic and photocatalytic degradation of azo dyes aqueous solutions by sol-gel TiO2 films. = Effects of concentration and UV radiation wavelengths on photolytic and photocatalytic degradation of azo dyes aqueous solutions by sol-gel TiO2 films. The Holistic Approach to Environment, 7 (1). pp. 3-14. ISSN 1848-0071. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Marinčić, Boško (2016) Proračun čvrstoće i krutosti podvozja Formule Student. = Strength and stiffness analysis of Formula "Student" chassis. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.
Marjanović, Dorian and Štorga, Mario and Škec, Stanko (2016) ALSTOM project report : failure identification and analysis methodology. = ALSTOM project report : failure identification and analysis methodology. ALSTOM EGH project. (In Press)
Markač, Tomislav (2016) Sedimentacija koloidnih Al2O3 suspenzija koje sadrže reciklirani prah;. = Sedimentation of colloid Al2O3 suspension which contain recycled alumina powder. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Markovska, Natasa and Duić, Neven and Vad Mathiesen, Brian and Guzović, Zvonimir and Piacentino, Antonio and Holger, Schlör and Lund, Henrik (2016) Addressing the main challenges of energy security in the twenty-first century – Contributions of the conferences on Sustainable Development of Energy, Water and Environment Systems. = Addressing the main challenges of energy security in the twenty-first century – Contributions of the conferences on Sustainable Development of Energy, Water and Environment Systems. Energy, 115 (3). pp. 1504-1512. ISSN 0360-5442. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 7.
Markulin, Matej (2016) Analiza naprezanja i deformacija u toplinski opterećenoj ljuskastoj konstrukciji. = Analysis of stresses and strains in shell structure subjected to thermal load. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.
Markučič, Joško (2016) Generalizacijsko svojstvo unaprijedne neuronske mreže. = Generalisation property of feed forward neural network. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.
Martinjak, Matija (2016) Numerička simulacija sustava za selektivnu katalitičku redukciju. = Numerical simulation of Selective Catalytic Reduction (SCR) system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vujanović, Milan.
Martić, Ivana and Degiuli, Nastia and Ćatipović, Ivan (2016) Evaluation of the added resistance and ship motions coupled with sloshing using potential flow theory. = Evaluation of the added resistance and ship motions coupled with sloshing using potential flow theory. Brodogradnja : časopis brodogradnje i brodograđevne industrije, 67 (4). pp. 109-122. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Martić, Ivana and Degiuli, Nastia and Ćatipović, Ivan (2016) Towards understanding the ship added resistance in waves. = Towards understanding the ship added resistance in waves. In: 22nd Symposium on Theory and Practice of Shipbuilding, In Memoriam prof. Leopold Sorta (SORTA 2016), 6-8.10.2016., Trogir, Seget Donji, Croatia.
Maruševac, Tena (2016) Priprema ispitivanja značajki eksperimentalnog svežnja alkalnog elektrolizatora. = Procedures for performances investigation of an alkaline electrolyzer stack. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Marušić, Ante and Lončar, Dražen and Batelić, Jakov and Franković, Valdi (2016) Increasing flexibility of coal power plant by control system modifications. = Increasing flexibility of coal power plant by control system modifications. Thermal science, 20 (4). pp. 1161-1169. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 4.
Marušić, Ante and Lončar, Dražen and Chacartegui, Ricardo (2016) High temperature latent heat storage for solar thermal power plants. = High temperature latent heat storage for solar thermal power plants. In: 11th Conference on Sustainable Development of Energy, Water and Environment Systems, 04.-09.09.2016., Lisabon, Portugal.
Maršić, Ivan (2016) Ispitivanje temperaturnih gradijenata mjeriteljskim pećima. = Testing of temperature gradients in metrology furnaces. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Matak, Nikola and Krajačić, Goran and Pilato, Ana Marija (2016) Integrating sustainable energy action plans for island municipalities: case study of Korcula. = Integrating sustainable energy action plans for island municipalities: case study of Korcula. Thermal science, 20 (4). pp. 1037-1048. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Matasić, Ivan and Stojanović, Ivan (2016) Zaštitni premazi s visokim udjelom cinka. = Zinc rich protective coatings. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.
Matejiček, Franjo and Semenski, Damir and Vnučec, Zdravko (2016) Uvod u statiku sa zbirkom zadataka, peto popravljeno izdanje. = Introduction to statics with examples. Strojarski fakultet, Slavonski Brod, -. ISBN 978-953-6048-86-1 (Unpublished)
Matija, Denis (2016) Analiza zaostalih naprezanja pri zavarivanju nelegiranih čelika primjenom programa Visual Weld. = Analysis of residual stresses in welding of unalloyed steels by application of Visual Weld software. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Matijašić, Matija (2016) Projektiranje i analiza točnosti estimatora stanja napunjenosti baterije temeljenog na lineariziranom modelu i Luenbergerovom estimatoru. = Design and accuracy analysis of battery state-of-charge estimator based on linearized model and Luenberger estimator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Matijević, Božidar and Župan, Josip and Pedišić, Ljiljana (2016) Quenching oil selection based on cooling effects of different oils composition. = Quenching oil selection based on cooling effects of different oils composition. In: 3rd Mediterranean Conference on Heat Treatment and Surface Engineering, 26-28.09.2016., Portorož, Slovenija.
Matić, Ante (2016) Utjecaj prethodne toplinske obrade alatnog čelika K490MC na svojstva PACVD prevlake TiN/TiCN. = Influence of the previous heat treatment of tool steel K490MC on the PACVD TiN/TiCN coating properties. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Matić, Saša (2016) Utjecaj postupaka sprezanja na točnost analize brodograđevnog proizvodnog procesa. = Influence of aggregation procedures on accuracy ofthe shipbuilding production process analysis. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Hadžić, Neven.
Matuško, Mario (2016) Uporaba kompozitnih materijala za izradbu nosive konstrukcije vozila Formule Student. = The use of composite materials for making Formula Student car chassis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.
Mačak, Jelena (2016) Metoda vrtložne rešetke za noseću površinu jednostavne geometrije. = Vortex lattice method for the lifting surface with simple geometry. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Mašović, Robert (2016) Proračun radijalnog kliznog ležaja s hidrodinamičkim podmazivanjem. = Calculation of hydrodynamic plain journal bearing. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.
Medić, Ivan (2016) Stroj za čišćenje školjki. = Machine for seashells cleaning. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Medić, Srđan and Groš, Josip and Horvatić Novak, Amalija and Kondić, Živko and Maglić, Leon (2016) Measurement of casting parameters in ZnAlCu3 molds created by additive technology. = Measurement of casting parameters in ZnAlCu3 molds created by additive technology. Metalurgija, 55 (4). pp. 705-708. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 5.
Mezdić, Dražen (2016) Zaštita aluminija i bakra hlapljivim inhibitorima korozije. = Corrosion protection of aluminium and copper with volatile corrosion inhibitors. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Mešić, Dino (2016) Prijedlog poboljšanja konstrukcije pomagala za otvor trbušne stome. = Proposal of design improvements of device for the opening of the abdominal stoma. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Midžić, Ida and Štorga, Mario and Marjanović, Dorian (2016) Validation of the Eco-transformity method. = Validation of the Eco-transformity method. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.
Mihajlović, Aleksandar (2016) Održavanje stabilnih sustava za gašenje požara. = Maintenance of stable fire-fighting system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Mihalic Pokopec, Ivana (2016) Utjecaj brzine hlađenja i dodatka cerija i bizmuta na morfologiju grafita u debelostijenim odljevcima od nodularnoga lijeva. = Influence of cooling rate and addition of cerium and bismuth on graphite morphology in heavy-section spheroidal graphite iron castings. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko and Mrvar, Primož.
Mihaljević, Ivica (2016) Model praćenja učinkovitosti procesa distribucije toplinske energije primjenom načela Lean. = The model for monitoring the efficiency of the process of distribution of heat energy by using Lean principles. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Mihaljević, Morana and Keran, Zdenka and Horvatić Novak, Amalija (2016) The influence of test piece surface roughness on ultrasonic thickness measurements. = The influence of test piece surface roughness on ultrasonic thickness measurements. In: 22. međunarodno savjetovanje o zaštiti materijala i industrijskom finišu, 20.04.2016., Zagreb, Hrvatska.
Mihaljević, Morana and Markučič, Damir (2016) Procjena mjerne nesigurnosti ultrazvučnoga mjerenja debljine stijenke. = Measurement uncertainty estimation of the ultrasonic wall thickness measurements. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.
Mihaljević, Morana and Šimunović, Vedran and Mudronja, Vedran (2016) Detectability analysis of computer radiography by means of computed tomography. = Detectability analysis of computer radiography by means of computed tomography. In: 6th Conference on Industrial Computed Tomography, 09-12.02.2016., Wels, Austria.
Mihoković, Morena (2016) Numerički proračun krutosti osi alata mobilnog manipulatora za inspekciju cijevi parogeneratora u nuklearnim elektranama. = Deformation analysis of manipulator for inspection of PWR nuclear power plants. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor and Bakić, Ante.
Miholić, Matija (2016) Višenamjenski traktorski priključak s funkcijama sakupljanja granja te okretanja i sakupljanja sijena. = Multifunctional tractor mounted branch collector and tedder/rake combination. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Mikec, Ivan (2016) Utjecaj pripreme površine nehrđajućeg čelika na zaštitna svojstva prevlake. = Influence of stainless steel surface treatment on protective properties of coating. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juraga, Ivan.
Miketić, Branimir (2016) Zaštita premazima filtra za vodu za piće. = Coating protection of filter for potable water. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stojanović, Ivan.
Miklaužić, Ivan (2016) Izbor hidrauličkog fluida i njegovo održavanje. = Selection and servicing of hydraulic fluid. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Petrić, Joško.
Mikulaj, Petar (2016) Rashladni sustavi u mljekarskoj industriji. = Refrigation system in dairy industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Mikulandrić, Robert and Boehning, Dorith and Boehme, Rene and Helsen, Lieve and Beckmann, Michael and Lončar, Dražen (2016) Dynamic modelling of biomass gasification in a co-current fixed bed gasifier. = Dynamic modelling of biomass gasification in a co-current fixed bed gasifier. Energy Conversion and Management, 125 (SI). pp. 264-276. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 6.
Mikulić, Antonio (2016) Valna opterećenja oštećenog broda. = Assessment of global vertical loads in damaged ship. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Parunov, Joško.
Mikulić, Iva (2016) Vitka logistika i vitko upravljanje opskrbnim lancem. = Lean logistics and Lean Supply Chain Management. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Mikulić, Matija (2016) Impulsno MAG zavarivanje visokolegiranih Cr-Ni čelika. = Pulse MAG welding of highalloyed Cr-Ni steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Mikulčić, Hrvoje and Cabezas, Heriberto and Vujanović, Milan and Duić, Neven (2016) Environmental assessment of different cement manufacturing processes based on Emergy and Ecological Footprint analysis. = Environmental assessment of different cement manufacturing processes based on Emergy and Ecological Footprint analysis. Journal of Cleaner Production, 130. pp. 213-221. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Mikulčić, Hrvoje and Klemeš, Jiri Jaromir and Duić, Neven (2016) Shaping sustainable development to support human welfare. = Shaping sustainable development to support human welfare. Clean technologies and environmental policy, 18 (6). pp. 1633-1639. ISSN 1618-954X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 3.
Mikulčić, Hrvoje and Klemeš, Jiri Jaromir and Duić, Neven (2016) Special issue section of clean technology and environmental policy dedicated to SDEWES 2015. = Special issue section of clean technology and environmental policy dedicated to SDEWES 2015. Clean Technologies and Environmental Policy, 18 (6). pp. 1631-1632. ISSN 1618-954X. Vrsta rada: Editorial. Kvartili JCR: Q2 (2016). Točan broj autora: 3.
Mikulčić, Hrvoje and Klemeš, Jiri Jaromir and Vujanović, Milan and Urbaniec, Krzysztof and Duić, Neven (2016) Reducing greenhouse gasses emissions by fostering the deployment of alternative raw materials and energy sources in the cleaner cement manufacturing process. = Reducing greenhouse gasses emissions by fostering the deployment of alternative raw materials and energy sources in the cleaner cement manufacturing process. Journal of cleaner production, 136, P. pp. 119-132. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.
Mikulčić, Hrvoje and Von Berg, Eberhard and Vujanović, Milan and Wang, Xuebin and Tan, Houzhang and Duić, Neven (2016) Numerical evaluation of different pulverized coal and solid recovered fuel co-firing modes inside a large-scale cement calciner. = Numerical evaluation of different pulverized coal and solid recovered fuel co-firing modes inside a large-scale cement calciner. Applied Energy, 184. pp. 1292-1305. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.
Mikulčić, Hrvoje and Vujanović, Milan and Duić, Neven (2016) Numerical study of pulverized biomass combustion in an experimental drop tube furnace. = Numerical study of pulverized biomass combustion in an experimental drop tube furnace. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran.
Mikulčić, Martin (2016) Numerička analiza čvrstoće šasije ultra sportskih automobila. = Numerical analysis of strength of supercar chassis. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.
Mikulčić, Neven (2016) Modeliranje i regulacija istosmjernog pogona dizalice naftnog bušaćeg vretena opremljenog servo-hidrauličkom kočnicom. = Modeling and control of the oil-well drill-string hoist DC electrical drive equipped with a servo-hydraulic brake. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Mikšić, Boris and Rogan, Ivan and Alar, Vesna (2016) Primjena hlapljivih inhibitora korozije u zaštiti opreme kod skladištenja i prekomorskog transporta. = Protection of equipment for storage and transport with vapor phase corrosion inhibitors. In: 22. međunarodno savjetovanje o zaštiti materijala i industrijskom finišu, 20.04.2016., Zagreb, Hrvatska.
Milanović, Niko (2016) Aditivi u motornom benzinu i dizelskom gorivu. = Additives in motor gasoline and diesel fuel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.
Milec, Branko (2016) Proračun i čvrstoća elemenata steznog spoja – DIN 7190. = Calculation and strenght of interference fit elements - DIN 7190. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kranjčević, Nenad.
Miler, Daniel and Žeželj, Dragan and Lončarek, Igor (2016) Case Study on CAE Tools: Optimization of a 6-axis Robotic Arm for MAG Welding. = Case Study on CAE Tools: Optimization of a 6-axis Robotic Arm for MAG Welding. In: 3rd International scientific conference - Conference on Mechanical Engineering Technologies and Applications, 07-09.12.2016., Jahorina, Republika Srpska, Bosna i Hercegovina.
Milojević, Filip (2016) Energijska analiza teorijskog Braytonova desnokretnog procesa. = Energy analysis of theoretical Brayton cycle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.
Mićanović, Robert and Rede, Vera (2016) Mehanička svojstva drvno - plastičnih kompozita. = Mechanical properties of wood - plastic composites. In: International Conference on Materials, Tribology, Recycling - MATRIB 2016, 23.-25. 06. 2016., Vela Luka, Hrvatska.
Mičuga, Hrvoje (2016) Sustav upravljanja smjerom leta bespilotne letjelice konfiguracije letećeg krila. = Direction control system for unmanned aircraft with flying wing configuration. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Morić, Mario (2016) Primjena nanočestica u sredstvima za hlađenje, ispiranje i podmazivanje kod postupaka obrade odvajanjem. = Application of nanoparticles in cutting fluids. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Udiljak, Toma.
Mudrinić, Ivan (2016) Višekriterijalno odlučivanje u procesu odabira prostornog rasporeda proizvodnog pogona. = Multi-criteria decision making in selectiona of plant layout. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Mueller, Andreas and Terze, Zdravko (2016) Geometric methods and formulations in computational multibody system dynamics. = Geometric methods and formulations in computational multibody system dynamics. Acta mechanica, 227 (12). pp. 3327-3350. ISSN 0001-5970. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 2.
Mueller, Andreas and Terze, Zdravko and Pandža, Viktor (2016) A Non-Redundant Formulation for the Dynamics Simulation of Multibody Systems in Terms of Unit Dual Quaternions. = A Non-Redundant Formulation for the Dynamics Simulation of Multibody Systems in Terms of Unit Dual Quaternions. In: 12th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, 21-24.08.2016., Charlotte, North Carolina, USA.
Murat, Zrinka (2016) Multisenzorski sustav za indirektni nadzor istrošenosti medicinskih svrdla. = Multisensory system for medical drills wear level monitoring. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.
Muslić, Merima and Maksimović, Vesna and Rede, Vera and Šokčević, Zrinka (2016) Utjecaj dodatka lebdećeg pepela i plastične deformacije na korozijsku otpornost Al-legure. = Influence of fly ash addition and plastic deformation on the corrosion resistance of Al-alloy. In: International Conference on Materials, Tribology, Recycling - MATRIB 2016, 23.-25. 06. 2016., Vela Luka, Hrvatska.
Mustać, Marin (2016) Međulaboratorijska usporedba u području mjerenja tlaka od 0 do 1,5 MPa. = Interlaboratory comparison in the pressure measurement range from 0 up to 1,5 MPa. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Mustać, Stipe (2016) Implementacija osjetnika momenta na eksperimentalni postav u Laboratoriju za motore i vozila. = Implementation of torque transducer on experimental setup in Laboratory of Engines and Vehicles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Nemet, Andreja and Klemeš, Jiří Jaromír and Duić, Neven and Yan, Jinyue (2016) Improving sustainability development in energy planning and optimisation. = Improving sustainability development in energy planning and optimisation. Applied Energy, 184. pp. 1241-1245. ISSN 0306-2619. Vrsta rada: Editorial. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Nemčić, Ivan (2016) Primjena optičkih metoda za određivanje ponašanja bioloških mekih tkiva pri ravninskom dvoosnom opterećenju. = Application of optical methods to asses the material response of soft tissues subjected under in-plane biaxial loading regime. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Nikšić, Ilijana (2016) Konstrukcija sustava hlađenja recirkuliranih ispušnih plinova (EGR) motora s unutarnjim izgaranjem. = Design of cooling system for exhaust gas recirculation (EGR) of internal combustion engine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Novak, Matija (2016) Numerička analiza debelostjenih cijevi kod naglog povećanja tlaka. = Numerical analysis of thick pipes Under rapid increase of pressure. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Skozrit, Ivica.
Novaković, Branko (2016) Relativistic Alpha Field Theory (RAFT): Part I. = Relativistic Alpha Field Theory (RAFT): Part I. Part I . Amazon.com, Seattle, WA, -. ISBN 019025047X
Novaković, Branko (2016) Relativistic Alpha Field Theory (RAFT): Part II. = Relativistic Alpha Field Theory (RAFT): Part II. Part II . Amazon.com, Seattle, WA, -. ISBN 019025047X
Novaković, Branko (2016) Relativistic Alpha Field Theory (RAFT): Part III. = Relativistic Alpha Field Theory (RAFT): Part III. Part III . Amazon.com, Seattle, WA, -. ISBN 019025047X
Novaković, Branko and Majetić, Dubravko and Kasać, Josip and Brezak, Danko (2016) Hamiltonian of multipotential field in nanorobotics. = Hamiltonian of multipotential field in nanorobotics. International Journal of New Technology and Research (IJNTR), 2 (10). pp. 45-51. ISSN 2454-4116. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Novosel, Franjo (2016) Energijsko - eksergijski proračun kondenzatora. = Energy - exergy calculation of condenser. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.
Novosel, Tomislav and Pavičević, Matija and Pukšec, Tomislav and Duić, Neven (2016) Urban regeneration on a neighbourhood level: implementation of fourth generation district heating and cooling concepts on a case study for a southeast european city. = Urban regeneration on a neighbourhood level: implementation of fourth generation district heating and cooling concepts on a case study for a southeast european city. In: 5th International Energy and Sustainability Conference 2016, 30.6.-1.7.2016., Köln, Njemačka.
Novosel, Tomislav and Pukšec, Tomislav and Krajačić, Goran and Duić, Neven (2016) Role of District Heating in Systems with a High Share of Renewables: Case Study for the City of Osijek. = Role of District Heating in Systems with a High Share of Renewables: Case Study for the City of Osijek. Energy Procedia, 95. pp. 337-343. ISSN 1876-6102. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Obradović, Ana (2016) Dizajn i proračun mehaničkog čepa za čepljenje cijevi parogeneratora. = Stress analysis of plugging procedure at PWR nuclear power plant steam generator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor.
Obraz, Robert and Hegedić, Miro (2016) Results of Kaizen methodology implementation in manufacturing. = Results of Kaizen methodology implementation in manufacturing. In: Interdisciplinary Management Research Conference XII, 20-22.05.2016., Opatija, Hrvatska.
Oletić, Alen (2016) Dijagnostika u održavanju automobila. = Diagnostics of car maintenance. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lisjak, Dragutin.
Opetuk, Tihomir (2016) Model uvođenja upravljanja zelenim lancima opskrbe. = Model of green supply chain management implementation. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Orešković, Marko and Čubrilo, Mirko and Essert, Mario (2016) The development of a network thesaurus with morpho-semantic word markups. = The development of a network thesaurus with morpho-semantic word markups. In: XVII EURALEX International Congress: Lexicography and Linguistic Diversity, 06-10.09.2016., Tbilisi, Gruzija.
Osmakčić, Josip (2016) Uređaj za ispitivanje masti za podmazivanje valjnih ležajeva. = Rolling bearing grease testing apparatus. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.
Osman, Krešimir and Pervan, Dražen and Tomaš, Žarko (2016) Methodology for energy efficient design of cooling plants. = Methodology for energy efficient design of cooling plants. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.
Ouled Housseine, Charaf and Malenica, Šime and Vladimir, Nikola and Choi, Byung-Ki (2016) Global hydroelastic analysis of 175K LNG ship. = Global hydroelastic analysis of 175K LNG ship. In: 15e Journées de l'Hydrodynamique, 22-24.11.2016., Brest, Francuska.
Ožbolt, Joško and Tonković, Zdenko and Lacković, Luka (2016) Microplane Model for Steel and Application on Static and Dynamic Fracture. = Microplane Model for Steel and Application on Static and Dynamic Fracture. Journal of engineering mechanics, 142 (2). pp. 1-21. ISSN 0733-9399. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2014). Točan broj autora: 3.
Pajić, Marin (2016) Rashladni procesi u pivarskoj industriji. = Cooling systems in brewery industry. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Pale, Viktor (2016) Implementacija zahtjeva iz regulative EU na sustave grijanja, ventilacije i klimatizacije u Republici Hrvatskoj. = Implementation requirements from EU legislation on hvac systems in Republic of Croatia. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Pamuković, Frane and Golemović, Mirna and Kodvanj, Janoš (2016) Eksperimentalno određivanje mehaničkih svojstava ljudske pupčane vene. = Experimental assessment of mechanical properties of human umbilical vein. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Pandža, Dominik (2016) Naprava za izradu tijela uređaja za mjerenje. = Device for making the body of measuring device. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Pandža, Mario (2016) Stroj za hladno prešanje ulja. = Cold press oil machine. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Pappo, Antonio (2016) Elektrokemijska svojstva nehrđajućih čelika. = Electrochemical properties of stainless steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Parunov, Joško and Rudan, Smiljko and Ćorak, Maro (2016) Structural Reliability Assessment of Stricken Oil Tanker in the Adriatic Sea. = Structural Reliability Assessment of Stricken Oil Tanker in the Adriatic Sea. In: International Conference on Ships and Offshore Structures ICSOS 2016, 31.08.-02.09.2016., Hamburg, Njemačka.
Pasanec, Josip and Ferdelji, Nenad (2016) Analysis of water vapor condensation models at high mass flux densities inside helical tubes. = Analysis of water vapor condensation models at high mass flux densities inside helical tubes. Transactions of FAMENA, 40. pp. 85-94. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 2.
Pavić, Lorenco (2016) Projektiranje kalupa za izradu boca. = Mould design for bottle making. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Pavičević, Matija (2016) Primjena toplinskog spremnika za povećanje učinkovitosti i isplativosti pogona postrojenja u sklopu centraliziranih toplinskih sustava. = Utilization of heat storage for the increase of the efficiency and economic viability of district heating. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Pavičević, Matija and Novosel, Tomislav and Pukšec, Tomislav (2016) Long and short term heat storage optimisation in district heating from an energy planning perspective. = Long and short term heat storage optimisation in district heating from an energy planning perspective. In: Digital Proceedings of the 2th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15-18.06.2016., Piran, Slovenija.
Pavičević, Matija and Novosel, Tomislav and Pukšec, Tomislav and Duić, Neven (2016) Anual heat storage optimisation in urban regeneration projects from an energy planning perspective. = Anual heat storage optimisation in urban regeneration projects from an energy planning perspective. In: Međunarodni kongres Energija i okoliš 2016, 26-28.10.2016., Opatija, Hrvatska.
Pavičević, Matija and Novosel, Tomislav and Pukšec, Tomislav and Duić, Neven (2016) Heat storage sizing and optimization for district heating from an energy planning perspective. = Heat storage sizing and optimization for district heating from an energy planning perspective. In: 4th International Conference on Contemporary Problems of Thermal Engineering, 13.-16.09.2016., Katowice, Poljska.
Pavković, Danijel and Lobrović, Mihael and Hrgetić, Mario and Komljenović, Ante (2016) A design of cascade control system and adaptive load compensator for battery/ultracapacitor hybrid energy storage-based direct current microgrid. = A design of cascade control system and adaptive load compensator for battery/ultracapacitor hybrid energy storage-based direct current microgrid. Energy Conversion and Management, 114. pp. 154-167. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2014). Točan broj autora: 4.
Pavković, Danijel and Sedić, Almir and Guzović, Zvonimir (2016) Oil drilling rig diesel power-plant fuel efficiency improvement potentials through rule-based generator scheduling and utilization of battery energy storage system. = Oil drilling rig diesel power-plant fuel efficiency improvement potentials through rule-based generator scheduling and utilization of battery energy storage system. Energy conversion and management, 121. pp. 194-211. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Pavlica, Nikola (2016) UV-degradacija biorazgradivih polimernih folija. = UV-degradation of biodegradable polymer foils. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.
Pavlinec, Marko (2016) Karakterizacija čeličnog bloka iz rimskog doba. = Characterization of steel bar from Roman times. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Pavličić, Luka (2016) Mjerenje srednjeg promjera navojnih prstena metodom s mjernim čeljustima. = Measurement of pitch diameters of thread rings using V-jag method. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Baršić, Gorana.
Pavlović, Berislav and Kozmar, Hrvoje (2016) Izvještaj o provođenju usporedbenih mjerenja s plinomjerima G100 i G250. = Report on performing comparison measurements with G100 and G250 gas flow meters. In: Iskustva laboratorija u primjeni HRN EN ISO/IEC 17025, 07.-19.04.2016., Poreč, Hrvatska.
Pađen, Ivan (2016) Analiza čvrstoće kompozitne ramenjače aviona za natjecanje Air Cargo Challenge. = Stress analysis of main spar for Air Cargo Challenge airplane. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Pašalić, Ivan (2016) Varijante rješenja novog skladišta u zadanom prostoru. = Alternatives of a new warehouse in defined space. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Pek, Nikola (2016) Utjecaj tehnologija zavarivanja na čvrstoću balistički ojačanog spoja spoja čelika ARMOX 500T. = Influence of welding technology on strenght of balistic reinforced welded joint on ARMOX 500T steel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Penava, Frano (2016) Primjena bambusa pri izradi bicikla. = Application of bamboo in bicycle. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.
Penava, Frano and Jakovljević, Suzana and Alar, Željko (2016) Bamboo bicycle – Past or future? = Bamboo bicycle – Past or future? Interdisciplinary description of complex systems, 14 (1). pp. 70-79. ISSN 1334-4684. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Penavić, Marin (2016) Sustav zamašnjaka za emulaciju inercije vozila. = Flywheel system for vehicle inertia emulation. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Herold, Zvonko.
Peran, Toni (2016) Identifikacija i regulacija elektrohidrauličkog servosustava. = Identification and control of an electro-hydraulic servosystem. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Pereš, Goran (2016) Implementacija konstrukcijskog znanja u 3d model balastnog utega stroja za iskop i transport rudače ugljena. = Design knowledge implementation in 3d model of ballast weight of bucket-wheel stacker/reclaimer for coal ore. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Perić, Mato and Tonković, Zdenko and Garašić, Ivica and Vuherer, Tomaž (2016) An engineering approach for a T-joint fillet welding simulation using simplified material properties. = An engineering approach for a T-joint fillet welding simulation using simplified material properties. Ocean engineering, 128. pp. 13-21. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Perišić, Marija Majda and Martinec, Tomislav and Štorga, Mario and Kanduč, Tadej (2016) Agent-based simulation framework to support management of teams performing development activities. = Agent-based simulation framework to support management of teams performing development activities. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.
Perković, Luka and Novosel, Tomislav and Pukšec, Tomislav and Ćosić, Boris and Mustafa, Manal and Krajačić, Goran and Duić, Neven (2016) Modeling of optimal energy flows for systems with close integration of sea water desalination and renewable energy sources: Case study for Jordan. = Modeling of optimal energy flows for systems with close integration of sea water desalination and renewable energy sources: Case study for Jordan. Energy Conversion and Management, 110. pp. 249-259. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 7.
Perleta, Ivan (2016) Proračun odziva tankostjene konstrukcije primjenom programa otvorenog koda OOFEM. = Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Prebeg, Pero.
Perlić, Domagoj (2016) Modeliranje i upravljanje hibridnim električnim pogonom gradskog autobusa. = Modelling and control of a bus hybrid electric power train. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.
Petljak, Denis (2016) Konstrukcija modula za automatsko ispitivanje tvrdoće. = Design of automated indentation hardness testing machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Staroveški, Tomislav.
Petranović, Zvonimir (2016) Numeričko modeliranje procesa spreja i izgaranja korištenjem Euler Eulerovog višefaznog pristupa. = Numerical modelling of spray and combustion processes using the Euler Eulerian multiphase approach. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vujanović, Milan.
Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2016) Implementation and validation of advanced nozzle-file interface for ELSA spray into the FIRE code. = Implementation and validation of advanced nozzle-file interface for ELSA spray into the FIRE code. UNSPECIFIED.
Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2016) Implementation and validation of advanced nozzle-file mapping into the FIRE code. = Implementation and validation of advanced nozzle-file mapping into the FIRE code. UNSPECIFIED.
Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven (2016) Modelling of the reactive sprays employing the Euler Eulerian multi-continuum approach. = Modelling of the reactive sprays employing the Euler Eulerian multi-continuum approach. In: 27th European Conference on Liquid Atomization and Spray Systems, 03-07.09.2016, Brighton, Ujedinjeno Kraljevstvo.
Petranović, Zvonimir and Edelbauer, Wilfried and Vujanović, Milan and Duić, Neven and Bešenić, Tibor (2016) Implementation and validation of ROI for inlet boundary condition. = Implementation and validation of ROI for inlet boundary condition. UNSPECIFIED.
Petranović, Zvonimir and Gadžić, Andrea and Vujanović, Milan (2016) Numerical simulations of primary breakup process by using the Euler Eulerian multi-fluid approach. = Numerical simulations of primary breakup process by using the Euler Eulerian multi-fluid approach. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 15-18.06.2016., Piran, Slovenija.
Petruša, Jelena (2016) Polimerni kompoziti za oplatu natjecateljskih motocikala. = Polymer Composites in Racing Motorcycle Bodywork. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.
Pevec, Denis (2016) Numeričko modeliranje dinamičkih procesa deformiranja tankih bakrenih limova. = Numerical modeling of dynamic deformation processes of thin copper sheets. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Pezer, Robert and Trapić, Ivan (2016) Atomistic Modeling of Different Loading Paths In Single Crystal Copper and Aluminum. = Atomistic Modeling of Different Loading Paths In Single Crystal Copper and Aluminum. Frattura ed Integrità Strutturale (Fracture and Structural Integrity), 10 (38). pp. 191-197. ISSN 1971-8993. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Pfeifer, Antun and Batas Bjelić, Ilija and Perković, Luka and Duić, Neven and Rajaković, Nikola (2016) Influence of market coupling with large energy markets on the operation of the Serbian energy system. = Influence of market coupling with large energy markets on the operation of the Serbian energy system. In: Mediterranean Conference on Power Generation, Transmission, Distribution and Energy Conversion (MedPower 2016), 6-9.11.2016., Beograd, Srbija.
Pfeifer, Antun and Dominković, Dominik Franjo and Ćosić, Boris and Duić, Neven (2016) Economic feasibility of CHP facilities fueled by biomass from unused agriculture land: Case of Croatia. = Economic feasibility of CHP facilities fueled by biomass from unused agriculture land: Case of Croatia. Energy conversion and management, 125. pp. 222-229. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Picig, Tomislav (2016) Implementacija elektronskog ventila za upravljanje pretlakom u ispušnoj cijevi motora s unutarnjim izgaranjem. = Implementation of the electronic valve for control of exhaust backpressure of internal combustion engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Pilipović, Ana and Valentan, Bogdan and Šercer, Mladen (2016) Influence of SLS processing parameters according to the new mathematical model on flexural properties. = Influence of SLS processing parameters according to the new mathematical model on flexural properties. Rapid prototyping journal, 22 (2). pp. 258-268. ISSN 1355-2546. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Platužić, Marko (2016) Primjena programa Visual-Weld 11.0 za određivanje optimalnog redoslijeda zavarivanja. = Application of Visual-Weld 11.0 software for determination of optimal welding sequence. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Pocrnić, Nikola (2016) Konstrukcija naprave za vježbanje s platformom podesive po visini. = Design of height adjustable exercise platform device. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar and Kostelac, Milan.
Polak, Matej (2016) Usporedba rezultata mjerenja unutarnjih promjera ostvarenih različitim ručnim mjerilima duljine. = Analysis of measurement results of internal diameters using different hand measuring instruments. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Baršić, Gorana.
Polanović, Tihomir (2016) Određivanje mehaničkih svojstava tankih tvrdih prevlaka. = Determination of mechanical properties for thin hard coatings. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Polančec, Mateo (2016) Numerička simulacija toka goriva kroz sapnicu i pojave kavitacije uslijed visokog tlaka ubrizgavanja. = Numerical simulation of fuel flow and cavitation phenomena due to the high pressure fuel injection. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Poljak, Davor and Gudlin, Mihael (2016) Solution to the Problem of Billing Municipal Solid Waste Collection in the City of Zagreb Using Smart Technology. = Solution to the Problem of Billing Municipal Solid Waste Collection in the City of Zagreb Using Smart Technology. In: LEAN Spring Summit 2016, 31.05.-02.06.2016., Šibenik, Hrvatska.
Pongrac, Marko (2016) Materijali za tlačne posude. = Materials for pressure vessels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćorić, Danko.
Popijač, Mario (2016) Energetsko planiranje održivih kvartova u pametnim gradovima. = Energy planning of sustainable districts in the smart cities. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.
Pospíšil, Stanislav and Trush, Arsenii and Kuznetsov, Sergey and Kozmar, Hrvoje and Náprstek, Jiří (2016) Influence of wind angle of attack and isotropic turbulence on wind-induced vibrations of ice-accreted bridge cables. = Influence of wind angle of attack and isotropic turbulence on wind-induced vibrations of ice-accreted bridge cables. In: 8th International Colloquium on Bluff Body Aerodynamics and Applications, 07-11.06.2016., Northeastern University, Boston, Massachusetts, SAD.
Potočki, Eva (2016) Modeliranje razvoja tehnologije temeljem analize patentnih podataka. = Technology development modelling based on the analysis of patents data. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Prajdić, Slaven (2016) Analiza toplinskih tokova između susjednih stanova u višestambenoj građevini. = Analysis of heat between neighboring apartments in a residental building. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.
Prebeg, Karlo (2016) Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice. = Design solution of CVT with two plate. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Prebeg, Pero and Andrić, Jerolim and Plavšić, Maja (2016) Utjecaj granične čvrstoće brodskog trupa na projektiranje glavnog rebra tankera prema harmoniziranim pravilima (IACS CSR BC&OT). = Influence of hull girder ultimate strength to the structural design of a midship section of oil tanker according to harmonized rules (IACS CSR BC&OT). In: 22nd Symposium on Theory and Practice of Shipbuilding, In Memoriam prof. Leopold Sorta-SORTA 2016, 6-8.10.2016., Trogir, Hrvatska.
Prebeg, Pero and Gašparović, Goran and Krajačić, Goran and Duić, Neven (2016) Long-term energy planning of Croatian power system using multi-objective optimization with focus on renewable energy and integration of electric vehicles. = Long-term energy planning of Croatian power system using multi-objective optimization with focus on renewable energy and integration of electric vehicles. Applied Energy, 184. pp. 1493-1507. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Prebeg, Pero and Rudan, Smiljko and Andrić, Jerolim (2016) Evaluation of Surrogate Models of Internal Energy Absorbed by Oil Tanker Structure during Collision. = Evaluation of Surrogate Models of Internal Energy Absorbed by Oil Tanker Structure during Collision. In: 15th International Conference on Computer Applications and Information Technology in the Maritime Industries, 09-11.05.2016., Lecce, Italija.
Premec, Jasmina (2016) Analiza stabilnosti konvolucijskih neuronskih mreža primjenjenih u klasifikaciji slika u svrhu detekcije neispravnosti proizvoda. = Stability Analysis of Deep Convolutional Neural Networks for image classification used in detection of products with defects. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.
Primorac, Ivan and Grilec, Krešimir and Jakovljević, Suzana (2016) Ojačane aluminijske pjene. = Reinforced aluminium foams. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016., Vela Luka, Hrvatska.
Prosinečki, Tomislav (2016) Utjecaj kuta nagiba na pomorstvene karakteristike jedrilice. = Influence of heeling angle on sailing yacht seakeeping characteristics. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćatipović, Ivan.
Prosinečki, Tomislav and Martić, Ivana and Ćatipović, Ivan (2016) Utjecaj kuta nagiba na pomorstvene karakteristike jedrilica. = The influence of heel angel on seakeeping characteristics of a sailing yacht. In: 22. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta (Sorta 2016), 6-8.10.2016., Trogir-Seget Donji, Hrvatska.
Prpić-Oršić, Jasna and Faltinsen, Odd Magnus and Parunov, Joško (2016) Influence of operability criteria limiting values on ship speed. = Influence of operability criteria limiting values on ship speed. Brodogradnja : Teorija i praksa brodogradnje i pomorske tehnike, 67 (3). pp. 37-58. ISSN 0007-215X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Ptičar, Martin (2016) MAG CBT zavarivanje visokolegiranih Cr-Ni čelika. = MAG CBT welding oh highalloyed Cr-Ni steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Pucak, Kristijan (2016) Projektiranje i izrada pneumatskog manipulatora. = The design and manufacturing of a pneumatic manipulator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Pugar, Daniel (2016) Polimer - najzastupljeniji ambalažni materijal današnjice. = Polymer - the most widely used packaging material. In: 20th International Conference on Printing, Design and Graphic Communications Blaž Baromić 2016, 08-10.09.2016., Senj, Hrvatska.
Pugar, Daniel and Haramina, Tatjana (2016) Aktivna i inteligentna ambalaža za pakiranje hrane. = Active and intelligent food packaging. In: 17th International Conference on Materials, Tribology and Recycling MATRIB 2016, 23.-25.06.2016., Vela Luka, Hrvatska.
Pukšec, Mirjana and Jurlina, Martin and Semenski, Damir and Ježek, Damir and Brnčić, Mladen and Karlović, Sven (2016) The Comparison of Biomehanical Characteristics Among Temporal Muscle Fascia, Fascia Lata and Dura Mater. = The Comparison of Biomehanical Characteristics Among Temporal Muscle Fascia, Fascia Lata and Dura Mater. In: The 33rd Danubia Adria Symposium on Advances in Experimental Mechanics, 20-23.09.2016., Portorož, Slovenija.
Puljić, Marko (2016) Prijedlog konstrukcije naprave za jačanje deficitne ramene muskulature. = Design proposal for deficient shoulder muscles strengthening. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Pustički, Daniel (2016) Utjecaj ECAP postupka na mikrostrukturu Al legura. = Influence of ECAP on Al-alloy microstructure. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Putar, Filip and Sorić, Jurica and Lesičar, Tomislav and Tonković, Zdenko (2016) Damage modeling using strain gradient based finite element formulation. = Damage modeling using strain gradient based finite element formulation. In: European Congress on Computational Methods in Applied Sciences and Engineering, 5-.10.06.2016., Hersonissos, Greece.
Putar, Filip and Sorić, Jurica and Lesičar, Tomislav and Tonković, Zdenko (2016) Modeliranje oštećenja primjenom konačnih elemenata višeg reda. = Damage modeling using higher-order finite elements. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Pšenica, Davor (2016) Povečanje efikasnosti uslužnih procesa primjenom alata vizualnog menadžmenta. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Rabuzin, Luka (2016) Rotaciona kosa za male poljoprivredne traktore. = Circular lawn mower for small tractors. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Radanić, Davor (2016) Utjecaj modifikacije Al-Si legure nasvojstva odljevka. = Effect of Al-Si alloy modification on the properties of cast parts. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Radanović, Heni (2016) Pregled tipova i karakteristika termostata. = The review and characteristics of thermostats. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Zvizdić, Davor.
Radiković, Marsel (2016) Ispitivanje adhezivnosti PACVD TiN/TiCN prevlake na alatnim čelicima za hladni rad. = Adhesivity testing of hard PACVD TiN/TiCN coating deposited on cold work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Radonić, Luka (2016) Konsolidacija aluminijskog praha. = Consolidation of Al-powder. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schauperl, Zdravko.
Radočaj, Danijel and Jurica, Maja and Kos, Sebastijan and Pavlic, Tomislav (2016) Programiranje industrijskih robota za potrebe robotiziranog zavarivanja. = Programming of industrial robots for needs of robotic welding. Zavarivanje, 59 (1/2). pp. 5-11. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Radoš, Martina (2016) Plazma rezanje. = Plasma cutting. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kožuh, Zoran.
Radošević, Ivan (2016) Analiza čvrstoće pojednostavljene metalne konstrukcije krila opterećene inercijskim silama. = Stress Analysis of a Simplified Metallic Wing Structure Loaded With Inertial Loads. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smojver, Ivica.
Rajaković, Marko (2016) Mogućnosti i ograničenja grupe e-puck mobilnih robota. = Possibilities and limitation of a group of e-puck mobile robots. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Petar.
Rajaković, Zoran (2016) Matematički model Bloka K u TE-TO Zagreb. = Mathematical model of unit K of power plant "TE-TO Zagreb". Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Čehil, Mislav.
Rakić, Anita and Ljoljo, Dinko and Ljubas, Davor (2016) Tehničke mjere za sprječavanje razmnožavanja bakterija Legionella spp. u sustavima za opskrbu toplom vodom. = Technical measures to prevent the growth of bacteria Legionella spp. in hot water supply systems. Hrvatske vode : časopis za vodno gospodarstvo, 24 (96). pp. 109-118. ISSN 1330-1144. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Rakić, Anita and Ljubas, Davor and Juretić, Hrvoje (2016) Dezinfekcija u sustavima javne vodoopskrbe. = Disinfection of the public water supply. In: II. međunarodni i VI. hrvatski znanstveno-stručni skup Voda za sve, 18.3.2016., Osijek, Hrvatska.
Ranilović, Borjan (2016) Solarna dizalica topline. = Solar assisted heat pump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Ranogajec, Vanja and Deur, Joško (2016) Bond graph analysis and optimal control of hybrid dual clutch transmission shift process. = Bond graph analysis and optimal control of hybrid dual clutch transmission shift process. In: 3rd Biennial International Conference on Powertrain Modelling and Control (PMC2016), 07-09.09.2016., Loughborough, Ujedinjeno Kraljevstvo.
Ranogajec, Vanja and Deur, Joško and Čorić, Mirko (2016) Bond graph analysis of automatic transmission shifts including potential of extra clutch control. = Bond graph analysis of automatic transmission shifts including potential of extra clutch control. SAE International Journal of Engines, 9 (3). ISSN 1946-3944. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Rauch, Martina and Galović, Antun and Virag, Zdravko (2016) Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency. = Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency. Transactions of FAMENA, 40. pp. 1-10. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 3.
Razum, Tomislav (2016) Ispitivanje prionjivosti tvrdih PACVD prevlaka na alatnom čeliku za topli rad. = Adhesivity testing of the hard PACVD coatings applied on hot work tool steel. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Razumić, Andrej (2016) Uvođenje postupka za analizu mjernog sustava u proizvodni proces. = Implementation of the measurement system analysis in the manufacturing process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Rede, Vera and Šokčević, Zrinka and Budim, Antonio (2016) Utjecaj završne obrade na korozijsku otpornost nehrđajućeg dupleks čeličnog lijeva. = Influence of surface finish on the corrosion resistance of duplex stainless steel casting. In: 15 th INTERNATIONAL FOUNDRYMEN CONFERENCE INNOVATION – The Foundation of Competitive Casting Production, 11–13. 5. 2016., Opatija, Hrvatska.
Repar, Karlo (2016) Izrada glazbenog instrumenta bubnja od zelenog kompozita. = Drum as a musical instrument made from green composite. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.
Repar, Karlo and Žmak, Irena (2016) Mehanička svojstva lanom ojačanog zelenog kompozita. = Mechanical properties of flax reinforced green composite. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016., Vela Luka, Hrvatska.
Roenby, Johan and Bredmose, Henrik and Jasak, Hrvoje (2016) A computational method for sharp interface advection. = A computational method for sharp interface advection. Royal Society Open Science, 3 (11). ISSN 2054-5703. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Rohlik, Petar (2016) Koncept iskorištavanja biootpada za proizvodnju biometana. = Biowaste utilization for biomethane production. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Duić, Neven.
Romac, Petar (2016) Konstrukcija intramedularne naprave za distrakcijsku osteogenezu femura. = The design of intramedullary distraction osteogenesis device for femur. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Rončević, Branimir and Bakić, Ante and Kodvanj, Janoš (2016) Numerical and experimental analysis of a frictionless receding contact between cylindrical indenter, layer and substrate. = Numerical and experimental analysis of a frictionless receding contact between cylindrical indenter, layer and substrate. Transactions of FAMENA, 40 (2). pp. 1-18. ISSN 1333-112. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 3.
Ropuš, Ivana and Haramina, Tatjana and Jagdale, Pravin and Tagliaferro, Alberto (2016) Mechanical properties of epoxy based nanocomposites containing MWCNT as a filler. = Mechanical properties of epoxy based nanocomposites containing MWCNT as a filler. In: 4th International Symposium on Environmental Management - Towards Circular Economy, 7-9.12.2016., Zagreb, Hrvatska.
Rorbach, Tomislav (2016) Regulacija struje i brzine vrtnje istosmjernog motora sa serijskom uzbudom za pogon dizalice naftnog bušaćeg vretena. = Current and speed control of a series-wound DC motor for an oil-well drill-string draw-works hoist drive. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Rosi, Bojan and Grašić, Leon and Đukić, Goran and Opetuk, Tihomir and Lerher, Tone (2016) Simulation-based performance analysis of automated single-tray vertical lift module. = Simulation-based performance analysis of automated single-tray vertical lift module. International journal of simulation modelling, 15 (1). pp. 97-108. ISSN 1726-4529. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 5.
Rozing, Goran and Alar, Vesna and Landek, Darko (2016) Poboljšanje triboloških svojstava martenzitnih korozijski postojanih čelika. = Improvement of tribological properties of martensitic stainless steel. In: 22. Međunarodno savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb, Hrvatska.
Rozing, Goran and Alar, Vesna and Marušić, Vlatko and Samardžić, Ivan (2016) Tribocorrosion wear of austenitic and martensitic steels. = Tribocorrosion wear of austenitic and martensitic steels. Metalurgija, 55 (3). pp. 441-444. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.
Rožić, Mateja (2016) Programski paket za robusno optimiranje topologije rešetkastih konstrukcija. = Software package for robust optimization of truss topology. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Andrej.
Rožić, Matija (2016) Traktorski priključak za vađenje kupusa. = Tractor mounted cabbage harvester. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Rožman, Mirko (2016) Značajna plastična deformacija postupkom kutne ekstruzije. = Severe plastic deformation by Equal Channel process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Keran, Zdenka.
Rudan, Smiljko and Volarić, Davor (2016) Fluid structure interaction analysis of a ship collision. = Fluid structure interaction analysis of a ship collision. In: The 7th International Conference on Collision and Grounding of Ships, ICCGS 2016, 15-18.06.2016., Ulsan, Koreja.
Runje, Biserka and Horvatić Novak, Amalija and Alar, Vesna and Medić, Srđan and Bošnjaković, Alen (2016) Examples of measurement uncertainty evaluations in accordance with the revised GUM. = Examples of measurement uncertainty evaluations in accordance with the revised GUM. In: 2016 Joint IMEKO TC1-TC7-TC13 Symposium: Metrology Across the Sciences: Wishful Thinking?, 3-5.08.2016., University of California, Berkeley, California.
Runje, Biserka and Horvatić Novak, Amalija and Mudronja, Vedran (2016) Methods for risk assessment. = Methods for risk assessment. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.
Runje, Biserka and Horvatić Novak, Amalija and Stepanić, Josip (2016) Computed tomography in dimensional metrology and material analysis. = Computed tomography in dimensional metrology and material analysis. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.
Runje, Biserka and Stepanić, Josip and Mihaljević, Morana and Horvatić Novak, Amalija and Kondić, Veljko (2016) Simulation modelling of a company providing two qualitatively different services to market. = Simulation modelling of a company providing two qualitatively different services to market. International journal of simulation modelling, 15 (3). pp. 473-484. ISSN 1726-4529. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 5.
Rupčić, David (2016) Projektiranje robotskog sustava za sklapanje i rasklapanje grebenaste sklopke. = Designing a robotic system for assembly and disassembly cam switches. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Rutz, Dominik and Janssen, Richard and Ugalde, Juan Manuel and Hofmeister, Morten and Sorensen, Per Alex and Jensen, Linn Laurberg and Doczekal, Christian and Zweiler, Richard and Pukšec, Tomislav and Duić, Neven and Doračić, Borna and Sunko, Rok and Sunko, Blaž and Markovska, Natasha and Karanfilovska, Meri and Rajaković, Nikola and Batas-Bijelić, Ilija and Kazagić, Anes and Ademović-Tahirović, Alma and Smajević, Izet and Jerotić, Slobodan and Mladenović, Bojana and Fejzović, Emir and Babić, Amra and Mataradžija, Milada and Kolbl, Mitja and Zrinski, Tomi (2016) Small, modular and renewable district heating & cooling grids for communities in South-Eastern Europe. = Small, modular and renewable district heating & cooling grids for communities in South-Eastern Europe. In: 24th European Biomass Conference and Exhibition, 06.-09.06.2016., Amsterdam, Nizozemska.
Sabljak, Tomislav (2016) Konstrukcijsko rješenje prijenosne skijaške vučnice. = Design solution of removable ski-lifting. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Safari, Ashkan and Tuković, Željko and Cardiff, Philip and Walter, Maik and Casey, Eoin and Ivanković, Alojz (2016) Interfacial separation of a mature biofilm from a glass surface - A combined experimental and cohesive zone modelling approach. = Interfacial separation of a mature biofilm from a glass surface - A combined experimental and cohesive zone modelling approach. Journal of the Mechanical Behavior of Biomedical Materials, 54. pp. 205-218. ISSN 1751-6161. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 6.
Safari, Ashkan and Tuković, Željko and Walter, Maik and Casey, Eoin and Ivanković, Alojz (2016) Mechanical properties of a mature biofilm from a wastewater system: From microscale to macroscale level. = Mechanical properties of a mature biofilm from a wastewater system: From microscale to macroscale level. Biofouling, 31 (8). pp. 651-664. ISSN 0892-7014. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.
Sakoman, Matija and Ćorić, Danko and Aleksandrov Fabijanić, Tamara and Kovačić, Saša (2016) Potential for PACVD coating on hardmetals. = Potential for PACVD coating on hardmetals. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016, Vela Luka, Hrvatska.
Sakoman, Matija and Ćorić, Danko and Vuić, Dario (2016) Load dependece of hardness and fracture toughness values on hardmetals. = Load dependece of hardness and fracture toughness values on hardmetals. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016., Vela Luka, Hrvatska.
Sambolek, Anamarija (2016) Utjecaj tretiranja površine piezo keramike plazmom na adheziju silikona. = The effect of plasma treatment of piezo ceramics on adhesion of silicone. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćurković, Lidija.
Satinović, Antonio (2016) Utjecaj unosa topline na čvrstoću zavarenog spoja aluminijske legure serije 6000. = Influence of heat input on strength of weld joint in aluminium alloy series 6000. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Saxholm, S. and Otal, P. and Altintas, A. and Grgec Bermanec, Lovorka and Durgut, Y. and Hanrahan, R. and Koçaş, I. and Lefkopoulos, A. and Pražák, D. and Sandu, I. and Åetina, J. and Spohr, I. and Steindl, D. and Tammik, K. and Testa, N. (2016) EURAMET.M.P-S9: comparison in the negative gauge pressure range −950 to 0 hPa. = EURAMET.M.P-S9: comparison in the negative gauge pressure range −950 to 0 hPa. Metrologia - Technical Supplement, 53 (1A). pp. 1-48. ISSN 0026-1394. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 15.
Schneider, Daniel Rolph and Guzović, Zvonimir and Duić, Neven and Boldyryev, Stanislav (2016) Energy transition in South East and Central Europe. = Energy transition in South East and Central Europe. Thermal science, 20 (4). XI-XX. ISSN 0354-9836. Vrsta rada: Editorial. Kvartili JCR: Q3 (2015). Točan broj autora: 4.
Segurado, Raquel and Madeira, J.F.A and Costa, Mario and Duić, Neven and Carvalho, Monica G (2016) Optimization of a wind powered desalination and pumped hydro storage system. = Optimization of a wind powered desalination and pumped hydro storage system. Applied Energy, 177. pp. 487-499. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 5.
Seleš, Karlo (2016) Numerička simulacija procesa zavarivanja u velikim konstrukcijama. = Numerical simulation of welding process in large structures. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tonković, Zdenko.
Senjanović, Ivo and Tomić, Marko and Hadžić, Neven and Vladimir, Nikola (2016) Static and dynamic rectangular finite elements for plate vibration analysis. = Static and dynamic rectangular finite elements for plate vibration analysis. International journal for engineering modelling, 29 (1-4). pp. 1-25. ISSN 1330-1365. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4.
Senjanović, Ivo and Tomić, Marko and Vladimir, Nikola and Hadžić, Neven (2016) An analytical solution to free rectangular plate natural vibrations by beam modes – ordinary and missing plate modes. = An analytical solution to free rectangular plate natural vibrations by beam modes – ordinary and missing plate modes. Transactions of FAMENA, 40 (3). pp. 1-18. ISSN 1333-1124. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 4.
Senjanović, Ivo and Vladimir, Nikola (2016) Submarine pressure hull design and the application of gained experience to the design of other pressure structures. = Submarine pressure hull design and the application of gained experience to the design of other pressure structures. In: 53rd Congress of the International Community of Submariners Associations, 24-28.05.2016, Pula, Hrvatska.
Senjanović, Ivo and Vladimir, Nikola and Hadžić, Neven and Tomić, Marko (2016) New first order shear deformation beam theory with in-plane shear influence. = New first order shear deformation beam theory with in-plane shear influence. Engineering structures, 110. pp. 169-183. ISSN 0141-0296. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko (2016) On new first-order shear deformation plate theories. = On new first-order shear deformation plate theories. Mechanics research communications, 73. pp. 31-38. ISSN 0093-6413. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 3.
Senjanović, Ivo and Vladimir, Nikola and Tomić, Marko and Hadžić, Neven and Šoda-Cotić, Stipan (2016) An integral procedure for ship vibration analysis. = An integral procedure for ship vibration analysis. In: 22. Simpozij "Teorija i praksa brodogradnje" in memoriam prof. Leopold Sorta (SORTA 2016), 06-08.10.2016., Trogir, Seget Donji.
Sever, Karlo (2016) Slijedni alat za oblikovanje poluobujmica. = Progressive die in pipe strap forming. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Keran, Zdenka.
Sinanović, Adnan (2016) Primjena keramičkih podloga kod MIG zavarivanja aluminija. = Application of ceramic backing in MIG welding of aluminium. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Sinković, Martin (2016) MAG CBT zavarivanje s trokomponentnim plinskim mješavinama. = MAG CBT welding with threecomponent gas mixtures. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Sjerić, Momir and Kozarac, Darko and Ormuž, Krunoslav (2016) Cycle-simulation turbulence modelling of IC engines. = Cycle-simulation turbulence modelling of IC engines. International journal of automotive technology, 17 (1). pp. 51-61. ISSN 1229-9138. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 3.
Sjerić, Momir and Taritaš, Ivan and Tomić, Rudolf and Blažić, Mislav and Kozarac, Darko and Lulić, Zoran (2016) Efficiency improvement of a spark-ignition engine at full load conditions using exhaust gas recirculation and variable geometry turbocharger - Numerical study. = Efficiency improvement of a spark-ignition engine at full load conditions using exhaust gas recirculation and variable geometry turbocharger - Numerical study. Energy conversion and management, 125. pp. 26-39. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.
Skurić, Ivo (2016) Konstrukcijsko rješenje namatalice ribarskog štapa. = Design solution of fishing reels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Slamek, Saša (2016) Konstrukcija stroja za branje bobičastog voća. = Design solution of a berries harvesting machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Slaninka, Tomislav (2016) Uređaj za utiskivanje žiga. = A device for stamping stamp. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Slavica, Andrej (2016) Proračun profila izgaranja u mogućem području rada HCCI motora. = Calculation of combustion profiles in feasible operating range of HCCI engine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Slaćanin, Ivan (2016) Doprinos dubokog hlađenja poboljšanju svojstava visokolegiranih alatnih čelika za hladni rad. = Contribution of deep cryogenic treatment on the properties of high alloyed cold work tool steels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Slunjski, Mihael (2016) Matematički model kogeneracijskog postrojenja na gorivo iz otpada. = Mathematical model of a cogeneration plant fuelled by RDF. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Schneider, Daniel Rolph.
Smojver, Ivica and Ivančević, Darko (2016) High-velocity impact damage modeling of laminated composites using Abaqus/Explicit and multiscale methods. = High-velocity impact damage modeling of laminated composites using Abaqus/Explicit and multiscale methods. In: Science in the Age of Experience, 23-27.05.2016., Boston, SAD.
Smojver, Vladimir and Štorga, Mario and Potočki, Eva (2016) An extended methodology for the assessment of technical invention evolution. = An extended methodology for the assessment of technical invention evolution. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.
Smoljanić, Goran and Ćeranić, Anja and Juretić, Hrvoje (2016) Izbor membranskih filtara za mjerenje otopljenog organskog ugljika. = Selection of filter membranes for dissolved organic carbon measurement. In: II. međunarodni i VI. hrvatski znanstveno-stručni skup Voda za sve, 18.03.2016., Osijek, Hrvatska.
Smolčić, Ivan (2016) Utjecaj načina šaržiranja obradaka na svojstva PACVD prevlaka. = Professional thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Cajner, Franjo.
Snider, Chris and Škec, Stanko and Gopsill, James and Hicks, Ben (2016) Determining work focus, common language and issues in engineering projects through topic persistence. = Determining work focus, common language and issues in engineering projects through topic persistence. In: 14th International Design Conference (DESIGN 2016), 16.-19.06.2016., Dubrovnik, Hrvatska.
Soldo, Vladimir and Boban, Luka and Borović, Staša (2016) Vertical distribution of shallow ground thermal properties in different geological settings in Croatia. = Vertical distribution of shallow ground thermal properties in different geological settings in Croatia. Renewable energy, 99. pp. 1202-1212. ISSN 0960-1481. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2015). Točan broj autora: 3.
Soldo, Vladimir and Boban, Luka and Grubišić, Toni (2016) Propan kao radna tvar u rashladnim uređajima i dizalicama topline. = Propane as a refrigerant in refrigerating systems and heat pumps. In: 12. međunarodno znanstveno-stručno savjetovanje Energetska i procesna postrojenja, 16.-18.11.2016., Rovinj, Hrvatska.
Soldo, Vladimir and Borović, Staša and Lepoša, Leon and Boban, Luka (2016) Comparison of different methods for ground thermal properties determination in a clastic sedimentary environment. = Comparison of different methods for ground thermal properties determination in a clastic sedimentary environment. Geothermics, 61. pp. 1-11. ISSN 0375-6505. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.
Sremec, Mario and Taritaš, Ivan and Sjerić, Momir and Kozarac, Darko (2016) Numerical investigation of influence of injection timing and knock on dual fuel engine. = Numerical investigation of influence of injection timing and knock on dual fuel engine. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 15-18.06.2016., Piran, Slovenija.
Stanec, Zlatko and Halambek, Jasna and Maldini, Krešimir and Balog, Martin and Krizik, Peter and Schauperl, Zdravko and Ćatić, Amir (2016) Titanium ions release from an innovative titanium-magnesium composite: An in vitro study. = Titanium ions release from an innovative titanium-magnesium composite: An in vitro study. Acta stomatologica Croatica, 50 (1). pp. 40-48. ISSN 0001-7019. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.
Stanić, Mihael (2016) Zaštita aluminijskih legura hlapjivim inhibitorima korozije. = Corrosion protection of aluminum alloys by volatile corrosion inhibitors. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Stančin, Hrvoje (2016) Analiza potrošnje i proizvodnje energije prema Akcijskom planu učinkovitog gospodarenja energijom Općine Mljet. = Analysis of energy demand and supply according to the Sustainable energy action plan of the Mljet Municipality. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.
Staroveški, Mario (2016) Testna pločica za ispitivanje kvalitete tvorevine kod taložng očvršćivanja. = Test plate for testing a quality of the product made with fused deposition modeling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.
Stepanić, Josip and Markučič, Damir (2016) Uspostavljanje sustava osposobljavanja operatera bespilotnih letjelica. = Establishing a system for training the operators of unmanned aerial vehicles. In: 16. Hrvatska konferencija o kvaliteti i 7. znanstveni skup Hrvatskog društva za kvalitetu - međunarodni stručni i znanstveni skup - „Ljudi – temelj uspješnosti sustava upravljanja“, 19-21.05.2016., Poreč, Hrvatska.
Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2016) Managing the process of product development preparation - Ideas assessment and evaluation. = Managing the process of product development preparation - Ideas assessment and evaluation. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.
Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2016) Procjena i odabir ideja u procesu inovacije proizvoda – rezultati empirijskog istraživanja. = Idea assessment and selection in product innovation - The empirical research results. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (6). pp. 1707-1716. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Stevanović, Milan and Marjanović, Dorian and Štorga, Mario (2016) Upravljanje idejama u procesu inovacije proizvoda – rezultati empirijskog istraživanja. = Idea management in product innovation - The empirical research results. Tehnički vjesnik, 23 (5). pp. 1285-1294. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Stilin, Karlo (2016) Povišenje otpornosti na adhezijsko trošenje titanove legure Ti6Al4V plazmatskim nitriranjem. = Increasing adhesive wear resistance of titanium alloy Ti6Al4V by plasma nitriding. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Landek, Darko.
Stipančić, Tomislav and Jerbić, Bojan and Ćurković, Petar (2016) A context-aware approach in realization of socially intelligent industrial robots. = A context-aware approach in realization of socially intelligent industrial robots. Robotics and computer-integrated manufacturing, 37. pp. 79-89. ISSN 0736-5845. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Stiperski, Ivan (2016) Mjerenje točnosti i preciznosti robota. = Measurement of robot accuracy and precision. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Stjelja, Davor (2016) Napredna metoda energijske analize za optimalno rješenje pri obnovi zgrada. = Advanced energy analysis method for optimal building retrofit design. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Stojanović, Ivan and Mikšić, Boris and Juraga, Ivan and Alar, Vesna and Radić Boršić, Ivana (2016) Evaluation of protective performance of co - extruded films with vapor corrosion inhibitor. = Evaluation of protective performance of co - extruded films with vapor corrosion inhibitor. In: The annual event of the European Federation of Corrosion "EUROCORR 2016", 11.-15.09.2016., Montpellier, Francuska.
Stošić, Jakov (2016) Ispitivanje vaga u tehničkom i zakonskom mjeriteljstvu. = Testing of weighing instruments in industrial and legal metrology. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grgec Bermanec, Lovorka.
Strusa, Janko (2016) Mrežni okvir za poslovnu inteligenciju u oblaku. = The framework for business intelligence in the cloud. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Essert, Mario.
Sumpor, Martin (2016) Tehnologija izrade dijelova transportnog modula. = Machining technology of components for transport module. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ciglar, Damir.
Surjak, Filip (2016) Mjerenje pomaka i deformacija na svježim kostima kod in vitro ispitivanja. = Measurement of displecement and strain on fresh bones in in vitro tests. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kodvanj, Janoš.
Surma, Robert (2016) Razvoj prostetičkog pomagala. = Development of prostetic aid. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.
Sušec, Damir (2016) Projektiranje i PLC implementacija proporcionalno-rezonancijskog regulatora za dinamički sustav harmoničkih veličina. = Design and PLC implementation of proportional-resonant controller for a dynamic system with harmonic quantities. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
Sviličić, Šimun (2016) Projektrianje i analiza vibracija rešetkastog nosača podmornice. = Design and vibration analysis of submarine carrier frame. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rudan, Smiljko.
Tadijanović, Imra (2016) Nelinearna analiza prsta za zaključavanje lakog manipulatora u PWR elektranama. = Nonlinear analysis of gripping mechanism on PWR manipulator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Karšaj, Igor and Bakić, Ante.
Tandarić, Karlo (2016) Utjecaj dodatnog materijala na udarni rad loma zavarenog spoja čelika visoke čvrstoće. = Influence of filler material on impact toughness of high strength steel weld joint. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Tanocki, Ela (2016) Proračun odziva broda na valovitom moru. = Response calculation of a ship on sea waves. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćatipović, Ivan.
Temarel, Pandeli and Bai, Wei. and Bruns, Anne and Dhavalikar, S. and Fonseca, Nuno and Gui, X. and Nestegård, A. and Papanikolau, Apostolos and Parunov, Joško and Song, K.H. and Wang, S. (2016) Prediction of wave-induced loads on ships: Progress and challenges. = Prediction of wave-induced loads on ships: Progress and challenges. Ocean Engineering, 119. pp. 274-308. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 11.
Temelini, Giulia (2016) Analiza proizvodnje u tvornici kabela. = Analysis of production in the cable factory. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Terze, Zdravko and Mueller, Andreas and Zlatar, Dario (2016) Angular momentum conserving integration scheme for multibody system dynamics in lie-group setting. = Angular momentum conserving integration scheme for multibody system dynamics in lie-group setting. Annual 2015 of the Croatian Academy of Engineering, 2016. pp. 385-391. ISSN 1332-3482. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 3.
Terze, Zdravko and Mueller, Andreas and Zlatar, Dario (2016) Singularity-free time integration of rotational quaternions using non-redundant ordinary differential equations. = Singularity-free time integration of rotational quaternions using non-redundant ordinary differential equations. Multibody system dynamics, 37 (3). pp. 1-25. ISSN 1384-5640. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Terze, Zdravko and Zlatar, Dario and Vrdoljak, Milan and Pandža, Viktor (2016) Lie Group Forward Dynamics of Fixed-Wing Aircraft With Singularity-Free Attitude Reconstruction on SO(3). = Lie Group Forward Dynamics of Fixed-Wing Aircraft With Singularity-Free Attitude Reconstruction on SO(3). Journal of Computational and Nonlinear Dynamics, 12 (2). pp. 1-11. ISSN 1555-1423. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.
Tišljar, Krešimir (2016) Simulacija tlačnog lijevanja odljevka od Al legure. = Die casting simulation of Al alloy part. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Tomelieh, Samer (2016) Optimizacija sustava skladištenja višestruke dubine. = Optimization of deep-line storage systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Tomić, Matko (2016) Robusno upravljanje generatorom vjetroagregata. = Robust control of wind turbine generator. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kasać, Josip.
Tomić, Tanja and Kožuh, Zoran and Garašić, Ivica and Samardžić, Ivan (2016) Effects of hydrogen upon the properties of thermo mechanical controlled process (TMCP) steel. = Effects of hydrogen upon the properties of thermo mechanical controlled process (TMCP) steel. Metalurgija, 55 (1). pp. 99-102. ISSN 0543-5846. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 4.
Tomić, Tihomir and Dominković, Dominik Franjo and Pfeifer, Antun and Schneider, Daniel Rolph (2016) WtE power plant operation on the energy market under the influence of legislation changes. = WtE power plant operation on the energy market under the influence of legislation changes. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran, Slovenija.
Tomić, Tihomir and Schneider, Daniel Rolph (2016) Sustainability analysis of MSW management system through energy consumption and return approach. = Sustainability analysis of MSW management system through energy consumption and return approach. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran, Slovenija.
Tomić, Tihomir and Ćosić, Boris and Schneider, Daniel Rolph (2016) Influence of legislative conditioned changes in waste management on economic viability of MSW-fuelled district heating system - case study. = Influence of legislative conditioned changes in waste management on economic viability of MSW-fuelled district heating system - case study. Thermal science, 20 (4). pp. 1105-1120. ISSN 0354-9836. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Tomičević, Zvonimir and Kodvanj, Janoš and Hild, François (2016) Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification – Analysis of uniaxial tests. = Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification – Analysis of uniaxial tests. European journal of mechanics. A, Solids, 59. pp. 140-154. ISSN 0997-7538. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Tomičević, Zvonimir and Kodvanj, Janoš and Hild, François (2016) Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification: Analysis of biaxial tests. = Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification: Analysis of biaxial tests. European Journal of Mechanics - A/Solids, 59. pp. 195-209. ISSN 0997-7538. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Tomičević, Zvonimir and Nemčić, Ivan and Kodvanj, Janoš (2016) Određivanje ponašanja svinjske aorte primjenom metode korelacije digitalne slike. = Determination of porcine aorta mechanical behaviour via digital image correlation. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Tomorad, Jura (2016) Grijalica prostora ložena krutim gorivom. = Roomheaters fired by solid fuel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Topić, Angela and Bauer, Branko and Kožuh, Zoran and Knezović, Nikola (2016) Utjecaj zaštitnog plina na geometriju spoja kod laserskog zavarivanja duplex čelika. = Influence of the shielding gas on the geometry of laser-welded joint in duplex stainless steeels. In: 41. Međunarodna konferencija HDTZ, Zavarivanje - Welding 2016, 08.-11.06.2016., Opatija, Hrvatska.
Topić, Marko (2016) Akumulacija rashladnog učinka bankom leda. = Storage of cooling energy through ice bank. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grozdek, Marino.
Topličanec, Domagoj (2016) Konstrukcijsko rješenje uređaja za ispitivanje okvira bicikla. = Design solution of a device for a bicyle frame testing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Tošić, Marina and Lisjak, Dragutin and Kolar, Davor (2016) An overview of optimization models and performance metric in aircraft maintenance. = An overview of optimization models and performance metric in aircraft maintenance. In: Euromaintenance 2016 Conference, 30.05.-01.06.2016., Atena, Grčka.
Tošić, Marina and Ćosić, Predrag (2016) Obrnuti postupak za određivanje broja prolaza i parametara obrade kod uzdužnog tokarenja. = Reverse algorithm for determining the number of cutting passes and cutting conditions in axial turning. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (4). pp. 1139-1145. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 2. (Submitted)
Trapić, Ivan and Pezer, Robert and Sorić, Jurica (2016) Atomističko modeliranje cikličkog opterećenja monokristala bakra. = Atomistic modeling of cyclic loading of copper monocristal. In: Sedmi susreti Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Zagreb.
Tremac, Filip (2016) Utjecaj svojstava toplinskih spremnika na sezonsku učinkovitost geotermalne dizalice topline. = Influence of heat source/sink properties on seasonal efficiency of the ground coupled heat pumps. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir and Boban, Luka.
Trivić, Denis (2016) Grafičko korisničko sučelje za udaljeno upravljanje programabilnim logičkim sklopom. = Graphical user interface for remote control of a programmable logic controller. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Trstenjak, Maja (2016) Podrška odlučivanju pri definiranju redoslijeda operacija. = Decision support in assessment of operations sequencing. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ćosić, Predrag.
Trupina, Ivan (2016) Karakterizacija čelika nepoznatog sastava. = Characterisation of unknown steel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Trupković, Marko (2016) Naprava za pozicioniranje komponenata poprečnog nosača podvozja. = Device for positioning components undercarriage cross member. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Trčak, Andrija (2016) Implementacija konstrukcijskog znanja u 3D računalni model kabelske kutije transformatora. = Implementation of the design knowledge in 3D computer model of transformer's cable box. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bojčetić, Nenad.
Turk, Filip (2016) Određivanje prionjivosti premaza elektrokemijskom impedancijskom spektroskopijom. = Determination of coating adhesion using electrochemical impedance spectroscopy. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Vesna.
Ule, Damjan (2016) Topološko optimiranje nosača kotača bolida Formule Student. = Topology optimization of Formula Student race car upright. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šagi, Goran.
Ulyev, Leonid and Boldyryev, Stanislav and Vasilyev, Mihail and Zebeshev, Temirkhan and Khusanov, Alisher (2016) Reducing energy consumption and reducing CO2 emissions of coke plant. = Reducing energy consumption and reducing CO2 emissions of coke plant. Environmental problems, 1 (2). pp. 133-144. ISSN 2414-5955. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Ulyev, Leonid and Vasilyev, Mihail and Maatouk, Abbas and Duić, Neven and Khusanov, Alisher (2016) Total Site Integration of Light Hydrocarbons Separation Process. = Total Site Integration of Light Hydrocarbons Separation Process. Chemical Engineering Transactions, 52. pp. 1-6. ISSN 1974-9791. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 5.
Urbaniec, Krzysztof and Mikulčić, Hrvoje and Duić, Neven and Lozano, Rodrigo (2016) SDEWES 2014 - Sustainable Development of Energy, Water and Environment Systems. = SDEWES 2014 - Sustainable Development of Energy, Water and Environment Systems. Journal of cleaner production, 130. pp. 1-11. ISSN 0959-6526. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Uroić, Tessa and Horvat, Marko and Jasak, Hrvoje (2016) Numerički proračun strujanja u centrifugalnoj pumpi. = Numerical simulation of a centrifugal pump. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Vale, Carlo (2016) Analiza Strategije održivog razvoja - Zeleni plan Istre i izgradnje bloka C termoelektrane Plomin. = Analysis of the Strategy for sustainable development - Green Plan of Istria and construction of the block C of the Thermal Power Plant Plomin. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.
Varga, Josip (2016) Sunčani fotonaponski sustavi integrirani u pročelje poslovne zgrade. = Service building integrated solar photovoltaic systems. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.
Vedriš, Matija (2016) Određivanje elastičnih parametara materijala gumenog elementa rastojnika-prigušivača. = Determining of spacer-damper rubber element elastic material parameters. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Wolf, Hinko.
Vidak, Josip (2016) Trošenje dentalnih svrdala. = Wear of dental burs. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jakovljević, Suzana.
Vidaković, Josip and Jerbić, Bojan and Šuligoj, Filip and Švaco, Marko and Šekoranja, Bojan (2016) Simulation for robotic stereotactic neurosurgery. = Simulation for robotic stereotactic neurosurgery. In: 27th DAAM International Symposium On Intelligent Manufacturing And Automation, 26-29.10.2016, Mostar, Bosna i Hercegovina.
Viderščak, Dalibor (2016) Materijali dijelova mobilnog telefona. = Materials of mobile phone components. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Grilec, Krešimir.
Vidić, Tomislav (2016) Stroj za automatsko sklapanje rekuperatora topline. = Machine for heat recovery device automatic assembling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Vidović, Ivan (2016) Utjecaj usitnjavanja zrna al legure na svojstva odljevaka. = Effect of al alloy grain refinement on the properties of cast part. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Bauer, Branko.
Vidović, Matko (2016) Projekt grijanja poslovne zgrade sustavom s dizalicom topline. = Design of commercial building heating system with heat pump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Smoljan, Darko.
Vidranski, Denis (2016) Primjena programa Visual-Weld za određivanje optimalnog unosa topline. = Application of Visual-Weld software for determination of optimal heat input. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Vijinigiri, Tejaswi and Kumawat, Kamal and Matijević, Božidar (2016) Effect of carbon thermodynamic activity in steels on boride layer growth. = Effect of carbon thermodynamic activity in steels on boride layer growth. In: International conference MATRIB 2016. Materials, Tribology, Recycling, 23-25.06.2016., Vela Luka, Hrvatska.
Vinceković, Luka (2016) Analiza proizvodnje električne energije iz sunčanih elektrana u Republici Hrvatskoj. = Analysis of electricity production from the solar power plants in Republic of Croatia. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krajačić, Goran.
Vindiš, Marko (2016) Primjena programa Visual-Weld za određivanje toplinskog ciklusa pri zavarivanju aluminija. = Application of Visual-Weld software for determination of aluminium welding thermal cycle. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Vindiš, Matija (2016) Rekonstrukcija referentnog etalona sile nazivne vrijednosti 1000 N. = Reconstruction of a reference force standard with the nominal capacity of 1000 N. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Alar, Željko.
Virag, Lana and Righi, Boris and Horvat, Nino and Karšaj, Igor (2016) Ispitivanje biološkog utjecaja tromba na fiziformnu aneurizmu. = Analysis of thrombus biological influence on fusiform aneurysm. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Virag, Zdravko and Galović, Antun and Živić, Marija (2016) Simulacija brzog hlađenja plinske boce. = Simulation of rapid discharge from a gas cylinder. In: 7. Međunarodni skup o prirodnom plinu, toplini i vodi, 28. - 30. 9. 2016., Osijek, R. Hrvatska.
Vitasović, Matej (2016) Optimiranje strukture neuronske mreže s radijalnim baznim funkcijama primjenom algoritma roja čestica. = Particle swarm optimisation of radial basis function neural networks. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Brezak, Danko.
Vitez, Nikola (2016) Robotsko praćenje kontura korištenjem senzora sile. = Robot contour-tracking with force feedback. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Vitić, Petar (2016) Analiza stabilnosti mjeriteljskih značajki državnog etalona za hrapavost RH Perthen. = Analysis of the stability of metrological characteristics for Croatian national roughness standard Perthen. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Baršić, Gorana.
Vjekoslav, Vrbljanin (2016) Analiza kritičnih parametara kretnji glave i vrata za konstruiranje zaštitne opreme. = Critical parameters analysis of gead and neck movement for the design of protective equipment. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Vjencislav, Barać (2016) Frekvencijska stabilizacija lasera za mjeriteljstvo duljine. = Frequency stabilisation of lasers for lenght metrology. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, Institut za fiziku, Zagreb. Mentor: Katić, Marko.
Vladimir, Nikola and Malenica, Šime and De Lauzon, Jérôme and Senjanović, Ivo and Im, Hong-ll and Choi, Byung-Ki and Cho, Dae Seung (2016) Structural design of ultra large ships based on direct calculation approach. = Structural design of ultra large ships based on direct calculation approach. Pomorski zbornik, Specia (1). pp. 63-79. ISSN 0554-6397. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 7.
Vladimir, Nikola and Senjanović, Ivo and Malenica, Šime and Ouled Housseine, Charaf and Choi, Byung-Ki and Im, Hong-Il (2016) Spectral fatigue analysis of liquefied natural gas carrier structural detail. = Spectral fatigue analysis of liquefied natural gas carrier structural detail. In: International Conference on Design & Construction of LNG Ships, 26-27.10.2016., London, UK.
Vlah, Daria (2016) Nadogradnja uređaja za umjeravanje mjernih traka. = Upgrading the device for calibration of the measurement tapes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štorga, Mario.
Vlah, Lorena (2016) Razvoj programske aplikacije za vizualizaciju relacija. = Development of software tool for relation visualization. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Vlašić, Borna Krešimir (2016) Utjecaj promjena parametara ovjesa na dinamičko ponašanje bolida Formula Student. = Impact of suspension parameter changes on Formula Student race car dynamic behaviour. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Vlašić, Deni (2016) Numerička simulacija pokusa slobodne vožnje modela brodskog vijka. = Numerical simulation of the open water test for marine propeller model. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Degiuli, Nastia.
Vlašić, Deni and Degiuli, Nastia and Martić, Ivana (2016) Numerička simulacija pokusa slobodne vožnje modela brodskog vijka. = Numerical simulation of the open water test for marine propeller model. In: 22. simpozij Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta (Sorta 2016), 6-8.10.2016., Trogir-Seget Donji, Hrvatska.
Volarić, Filip (2016) Određivanje utjecaja uzdužnog nagiba i urona kobilice na silu otpora trupa jedrilice klase Optimist. = Determination of influence of pitch angle and keel depth on drag force of sail-boat class Optimist hull. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krizmanić, Severino.
Vrdoljak-Colo, Roko (2016) Projekt sustava grijanja i hlađenja stambene zgrade. = Design of heating and cooling system for residential building. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Vrsalović, Ladislav and Paić, Tomislav and Alar, Vesna and Stojanović, Ivan and Jakovljević, Suzana and Gudić, Senka and Smoljko, Ivana (2016) The effects of surface treatment AISI 316L welded joints on its corrosion behaviour in chloride solution. = The effects of surface treatment AISI 316L welded joints on its corrosion behaviour in chloride solution. Kovové materiály, 54 (3). pp. 167-174. ISSN 0023-432X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q4 (2016). Točan broj autora: 7.
Vuger, Petar Krešimir (2016) Mjerenja na solarnoj dizalici topline. = Performance measurement of solar heat pump. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Vuilleumier, David and Taritaš, Ivan and Wolk, Benjamin and Kozarac, Darko and Saxena, Samveg and Dibble, Robert (2016) Multi-level computational exploration of advanced combustion engine operating strategies. = Multi-level computational exploration of advanced combustion engine operating strategies. Applied energy, 184. pp. 1273-1283. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.
Vujanović, Milan and Petranović, Zvonimir and Wilfried, Edelbauer and Duić, Neven (2016) Modelling spray and combustion processes in diesel engine by using the coupled Eulerian-Eulerian and Eulerian-Lagrangian method. = Modelling spray and combustion processes in diesel engine by using the coupled Eulerian-Eulerian and Eulerian-Lagrangian method. Energy conversion and management, 125. pp. 15-25. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Vukres, Igor (2016) Emisije motornih vozila pogonjena ukapljenim naftnim plinom. = Emissions of motor vehicles propelled by liquefied petroleum gas. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lulić, Zoran.
Vukčević, Vuko (2016) Numericko modeliranje spregnutog potencijalnog i viskoznog strujanja za primjenu u pucinskoj i brodskoj hidrodinamici. = Numerical modelling of coupled potential and viscous flow for marine applications. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jasak, Hrvoje.
Vukčević, Vuko and Cvijetić, Gregor and Gatin, Inno and Jasak, Hrvoje (2016) The harmonic balance method for temporally periodic free surface flows in marine hydrodynamics. = The harmonic balance method for temporally periodic free surface flows in marine hydrodynamics. In: 11th OpenFOAM Workshop, 26-30.06.2016., Guimaraes, Portugal.
Vukčević, Vuko and Jasak, Hrvoje (2016) Decomposition model for naval hydrodynamic applications, Part I: Computational method. = Decomposition model for naval hydrodynamic applications, Part I: Computational method. Ocean Engineering, 121. pp. 37-46. ISSN 0029-8018. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2.
Vukčević, Vuko and Šojat, Borna and Gatin, Inno and Jasak, Hrvoje (2016) Validation and Verification of Seakeeping in OpenFOAM. = Validation and Verification of Seakeeping in OpenFOAM. In: Simpozij Teorija i praksa brodogradnje, 06-08.10.2016., Trogir, Seget Donji, Hrvatska.
Vukšić, Svetlana (2016) Upravljanje utjecajem na okoliš. = Environmental management. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Vučetić, Damira (2016) Brod za rasuti teret s dvobokom nosivosti 25000 dwt. = 25000 dwt double hull bulk carrier. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Slapničar, Vedran.
Vučković, Krešimir and Galić, Ivica and Čular, Ivan (2016) A numerical model for estimation of spur gear tooth bending fatigue life. = A numerical model for estimation of spur gear tooth bending fatigue life. In: 16th International Conference on New Trends in Fatigue and Fracture NT2F16, 24-27.05.2016., Dubrovnik, Hrvatska.
Wang, Jin and Cui, Pei and Vujanović, Milan and Baleta, Jakov and Duić, Neven and Guzović, Zvonimir (2016) Effects of surface deposition and droplet injection on film cooling. = Effects of surface deposition and droplet injection on film cooling. Energy Conversion and Management, 125. pp. 51-58. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.
Wang, Xuebin and Deng, Shuanghui and Tan, Houzhang and Adeosun, Adewale and Vujanović, Milan and Yang, Fuxin and Duić, Neven (2016) Synergetic effect of sewage sludge and biomass co-pyrolysis: a combined study in thermogravimetric analyzer and a fixed bed reactor. = Synergetic effect of sewage sludge and biomass co-pyrolysis: a combined study in thermogravimetric analyzer and a fixed bed reactor. Energy Conversion and Management, 118 (15). pp. 399-405. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 7.
Wuetrich, C. and Alisic, S. and Altintas, A. and van Andel, I. and InMook, C. and Eltwail, A. and Farár, P. and Hetherington, P. and Koçaş, I. and Lefkopoulos, A. and Otal, P. and Pražák, D. and Sabuga, W. and Salustiano, R. and Sandu, I. and Sardil, M. and Saxholm, S. and Setina, J. and Spohr, I. and Steindl, D. and Testa, N. and Vámossy, C. and Grgec Bermanec, Lovorka (2016) Comparison in gas media (absolute and gauge mode) in the range from 25 kPa TO 200 kPa (EURAMET.M.P-K8). = Comparison in gas media (absolute and gauge mode) in the range from 25 kPa TO 200 kPa (EURAMET.M.P-K8). Metrologia - Technical Supplement, 53. ISSN 0026-1394. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2015). Točan broj autora: 23.
Xiong, Yingying and Tan, Houzhang and Wang, Yibin and Mikulčić, Hrvoje and Duić, Neven and Xu, Weigang and Wang, Xuebin (2016) The recovery of water from flue gas in coal-fired power plants by using fluoroplastic heat exchanger. = The recovery of water from flue gas in coal-fired power plants by using fluoroplastic heat exchanger. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran.
Zadrija, Josip (2016) Zahtjevi iz regulative EU na sustave GVK i njihova implementacija u Hrvatskoj. = Requirements from EU legislation on HVAC systems and their implementation in Croatia. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Balen, Igor.
Zagorec, Ivica and Hegedić, Miro (2016) Lean Implementation Status Measurement. = Lean Implementation Status Measurement. In: LEAN Spring Summit 2016, 31.05.-02.06.2016., Šibenik, Hrvatska.
Zahboune, Hassan and Zouggar, Smail and Krajačić, Goran and Sabev Varbanov, Petar and Elhafyani, Mohammed and Ziani, Elmostafa (2016) Optimal hybrid renewable energy design in autonomous system using Modified Electric System Cascade Analysis and Homer software. = Optimal hybrid renewable energy design in autonomous system using Modified Electric System Cascade Analysis and Homer software. Energy conversion and management, 126. pp. 909-922. ISSN 0196-8904. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 6.
Zajec, Marko (2016) Konstrukcijsko rješenje lake građevinske dizalice. = Design solution of a lightweight construction winch-lift. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Zanchi, Vedran (2016) Energijsko - eksergijski proračun zagrijača i ovlaživača zraka. = Energy - exergy calculation of air heater and humidifier. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.
Zeba, Josip (2016) Numerička analiza Stockbridgeovog prigušivača. = Numerical analysis of Stockbridge damper. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.
Zgurić, Mislav (2016) Analiza deformacija pri zavarivanju austenitnih Cr-Ni čelika primjenom programa Visual Weld. = Analysis of distortion during welding of austenitic Cr-Ni steels by application of Visual Weld software. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Zhao, Guoying and Pinte, Gregory and Alujević, Neven and Depraetere, Bruno and Sas, Paul (2016) Adaptive-passive control of structure-borne noise of rotating machinery using a pair of shunted inertial actuators. = Adaptive-passive control of structure-borne noise of rotating machinery using a pair of shunted inertial actuators. Journal of intelligent material systems and structures, 27 (12). pp. 1584-1599. ISSN 1045-389X. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 5.
Zidarić, Karlo (2016) Primjena praškom punjene žice za zavarivanje raznorodnih čelika. = Application of flux cored wire for welding of dissimilar steels. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Zimak, Antonija (2016) Analiza utjecaja okvira okretnog postolja na okoliš kroz cijeli životni ciklus. = Environmental impact assessment of bogies. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Zorc, Davor (2016) Internet of Things (IoT) in Industrial engineering education. = Internet of Things (IoT) in Industrial engineering education. In: 8th International Conference on Management of Technology – Step to Sustainable Production (MOTSP 2016), 01-03.06.2016., Rovinj, Republika Hrvatska.
Zrakić, Igor (2016) Eksperimentalna analiza svojstava materijala za taložno očvršćivanje. = Experimental analysis of properties of materials for fused deposition modeling. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.
Zrinušić, Mateja (2016) Zaštita hlapljivim inhibitorima korozije. = Corrosion protection with vapor corrosion inhibitors. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stojanović, Ivan.
Zrnić, Dino (2016) Analiza uzgona kombinacije tijelo-noseća površina. = Lift analysis for the body-lifting surface arrangement. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Zubić, Alen and Bojčetić, Nenad and Žeželj, Dragan (2016) Integracija privatnih društvenih mreža u PLM sustave. = Integration of private social network in PLM systems. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2). pp. 611-616. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Zubić, Alen and Bojčetić, Nenad and Žeželj, Dragan and Flegarić, Stjepan (2016) A tool for visualization of CAD model component relations using DSM. = A tool for visualization of CAD model component relations using DSM. In: 14th International Design Conference (DESIGN 2016), 16-19.06.2016., Dubrovnik, Hrvatska.
Zvonimir, Matić (2016) Kaskadne dizalice topline u industriji. = Cascade heat pumps in industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Soldo, Vladimir.
Østergaard, Poul Alberg and Duić, Neven (2016) Editorial - International Journal of Sustainable Energy Planning and Management Vol 11. = Editorial - International Journal of Sustainable Energy Planning and Management Vol 11. International Journal of Sustainable Energy Planning and Management, 11. pp. 1-2. ISSN 2246-2929. Vrsta rada: Editorial. . Točan broj autora: 2.
Ćeranić, Anja (2016) Izbor membranskih filtara za mjerenje otopljenog organskog ugljika. = Selection of filter membranes for dissolved organic carbon measurement. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.
Ćorić, Danko (2016) Svojstva i primjena titana i njegovih legura (Prvi dio). = Properties and Application of Titanium and Titanium Alloys (First Part). Zavarivanje, 59 (5/6). pp. 125-131. ISSN 0044-1902. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 1.
Ćorić, Danko and Majić Renjo, Marijana and Ćurković, Lidija and Žmak, Irena (2016) Indentation fracture toughness of Y-TZP dental ceramics. = Indentation fracture toughness of Y-TZP dental ceramics. In: 16th International Conference on New Trends in Fatigue and Fracture NT2F16, 24-27.05.2016., Dubrovnik, Hrvatska.
Ćosić, Stanislaw (2016) Osiguranje kvalitete zavarenih spojeva u brodograđevnom proizvodnom procesu. = Welding joints quality insurance during shipbuilding production process. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Hadžić, Neven.
Ćulić, Luka (2016) Analiza strujanja u modelu ispusta plinskih turbina pri velikoj cirkularnoj komponenti brzine. = Analysis of fluid flow in gas turbine EGH model subjected to large circular component of velocity. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krizmanić, Severino.
Ćurić, Pere (2016) Upravljanje složenim projektima. = Complex project management. Master's thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Ćurković, Lidija and Bačić, Ivana and Otmačić-Ćurković, Helena and Šokčević, Zrinka (2016) GDOES analysis of sol-gel ZrO2 thin films on austenitic stainless steel. = GDOES analysis of sol-gel ZrO2 thin films on austenitic stainless steel. In: 15th International Foundrymen conference innovation – The Foundation of Competitive Casting Production, 11-13.05.2016., Opatija, Hrvatska.
Ćurković, Lidija and Jukić, Mirela and Šipušić, Juraj and Šokčević, Zrinka (2016) Sorption kinetics of ionic dye from aqueous solution on biomass fly ash. = Sorption kinetics of ionic dye from aqueous solution on biomass fly ash. In: 2nd International and 6th Croatian Scientific and Professional Conference Water For All, 18.03.2016., Osijek.
Ćurković, Lidija and Ljubas, Davor and Marinović, Veronika and Babić, Sandra and Čizmić, Mirta and Majić Renjo, Marijana (2016) Photocatalytic degradation of methyl orange by sol-gel TiO2 films. = Photocatalytic degradation of methyl orange by sol-gel TiO2 films. In: The 48th International October Conference on Mining and Metallurgy, 28.09.-01.10.2016., Bor, Srbija.
Čabradi, Bojan and Ćurko, Daria and Jurčević Lulić, Tanja and Domljan, Danijela (2016) Design of the school chair mechanism for dynamic sitting. = Design of the school chair mechanism for dynamic sitting. In: Proceedings of the 6th International Ergonomics Conference Ergonomics 2016 - Focus on Synergy, 15.-18.06.2016., Zadar, Hrvatska.
Čabraja, Kristijan (2016) Mikrostruktura balistički ojačanog zavarenog spoja čelika ARMOX 500 T. = Microstructure of balistic reinforced welded joint on ARMOX 500 T steel. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Garašić, Ivica.
Čadež, Luka (2016) Razrada metode umjeravanja promjera kontrolnih prstena u Nacionalnom laboratoriju za duljinu. = Development of method for diameter calibration of ring gauges at National laboratory for length. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Baršić, Gorana.
Čarapina, Matej (2016) Senzori sila i momenata i njihova primjena. = Force and torque sensors and their applications. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kunica, Zoran.
Čataj, Roman (2016) Hladnjak ulja za transformator. = Oil cooler for transformer. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Švaić, Srećko.
Čehil, Mislav and Katulić, Stjepko and Schneider, Daniel Rolph (2016) A novel method for finding optimal heat recovery steam generator heat exchangers layout. = A novel method for finding optimal heat recovery steam generator heat exchangers layout. In: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES, 15.-18.06.2016., Piran, Slovenija.
Čizmić, Mirta and Ljubas, Davor and Ćurković, Lidija and Babić, Sandra (2016) Photolytic and photocatalytic degradation of pharmaceuticals. = Photolytic and photocatalytic degradation of pharmaceuticals. In: 2nd International and 6th Croatian Scientific and Professional Conference Water for all, 18.03.2016., Osijek.
Čiča, Damjan (2016) Analiza kvalitativnih varijabli. = Analyses of qualitative variables. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Runje, Biserka.
Čok, Bruno (2016) Mapiranje uslužnih procesa. = Mapping of services processes. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Štefanić, Nedeljko.
Čorić, Mirko and Deur, Joško and Kasać, Josip and Tseng, Hongtei Eric and Hrovat, Davor (2016) Optimisation of active suspension control inputs for improved vehicle handling performance. = Optimisation of active suspension control inputs for improved vehicle handling performance. Vehicle System Dynamics, 54 (11). pp. 1574-1600. ISSN 0042-3114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 5.
Čorić, Mirko and Deur, Joško and Xu, Li and Tseng, Eric Hongtei and Hrovat, Davor (2016) Optimisation of active suspension control inputs for improved vehicle ride performance. = Optimisation of active suspension control inputs for improved vehicle ride performance. Vehicle system dynamics, 54 (7). pp. 1004-1030. ISSN 0042-3114. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q2 (2016). Točan broj autora: 5.
Čular, Ivan (2016) Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem. = Stress cycle in thin rimmed spur gear tooth root. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.
Čulina, Jerko (2016) Analiza performansi bespilotne letjelice HUSZ Tern. = Performance analysis for the unmanned aerial vehicle HUSZ Tern. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Đukić, Ankica and Barbir, Frano and Duić, Neven (2016) Hydrogen and fuel cells: A preface to the special issue section on “The 14th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), 27 September-2 October, Dubrovnik, Croatia”. = Hydrogen and fuel cells: A preface to the special issue section on “The 14th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), 27 September-2 October, Dubrovnik, Croatia”. International Journal of Hydrogen Energy, 41 (31). pp. 13797-13799. ISSN 0360-3199. Vrsta rada: Editorial. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Đukić, Ankica and Güttler, Ivan and Pašičko, Robert (2016) Perspectives of Hydrogen Automotive Applications in Croatia. = Perspectives of Hydrogen Automotive Applications in Croatia. In: Energy, Transportation and Global Warming. Green Energy and Technology . Springer, Cham, Switzerland, pp. 433-445. ISBN 978-3-319-30126-6
Đukić, Goran and Opetuk, Tihomir and Tone, Lerher (2016) An integrated model of storage and order-picking area layout design. = An integrated model of storage and order-picking area layout design. In: International Conference on Industrial Logistics: Logistics and Sustainability, ICIL 2016, 28.09.-01.10.2016., Krakow, Poljska.
Đuranović, Matej (2016) Energijsko-eksergijski proračun peći na pelete. = Energy-exergy calculation of a pellet stove. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galović, Antun.
Đurasević, Sanijo (2016) Progrijavanje troslojne ravne stijenke. = Heating of three - layer flat wall. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Boras, Ivanka.
Šafarić, Krešimir (2016) Rekonstrukcija sustava za robotsko sklapanje termoregulatora. = Reconstruction of the system for robotic assembly of the thermoregulator. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jerbić, Bojan.
Šajfar, Ante (2016) Četverostupnjevani mjenjač manevarske dizelmehaničke lokomotive. = Four speed gearbox of the maneuvering diesel-mechanical locomotive. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kostelac, Milan.
Šantek, Denis (2016) Konstrukcijsko rješenje glodalice sa zakretnom glavom. = Design solution of a swivel head milling machine. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žeželj, Dragan.
Šego, Neven (2016) Analiza odabranih performansi helikoptera s koaksijalnim rotorom. = Selected performance analysis for the helicopter with coaxial rotor. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vrdoljak, Milan.
Šercer, Davor (2016) Zaštita energetskog transformatora premazima. = Coating protection of power transformers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Stojanović, Ivan.
Šilec, Luka (2016) Runilica za kukuruz. = Corn sheller. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Šilovinac, Andrea (2016) Uređaj za ispitivanje maziva za valjne ležajeve. = Rolling bearing lubricant test rig. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Vučković, Krešimir.
Šimeg, Lana (2016) Izrada kalupa za ispitna tijela na bazi polimera. = Mould making for test specimens of plastic based materials. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Žmak, Irena.
Šimpović, Ilija (2016) Simulacijski model procesa proizvodnje radijatora. = Simulation model of radiator manufacturing process. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Đukić, Goran.
Šimunek, Josip (2016) Razvoj modela umjetne srčane cirkulacije. = Development of MOCK circulatory system. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.
Šimunić, Nikola and Jurčević Lulić, Tanja (2016) Stability analysis of dental guides. = Stability analysis of dental guides. In: Ergonomics 2016 - Focus on Synergy, 15.-18.6.2016., Zadar.
Šimunović, Vinko and Juraga, Ivan and Kurtela, Marin (2016) Prikaz slučaja korozijskog oštećivanja aluminijskih spremnika za vodu. = Case histories of corrosion damage on aluminium water tanks. In: 22. Savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016", 20.04.2016., Zagreb.
Škec, Stanko and Štorga, Mario and Antonić, Ivana (2016) Analysis of information behaviour in product development context. = Analysis of information behaviour in product development context. In: 14th International Design Conference (DESIGN 2016), 16.-19.06.2016., Dubrovnik, Hrvatska.
Škec, Stanko and Štorga, Mario and Tečec Ribarić, Zlatka (2016) Primjena uzorkovanja rada na aktivnosti razvoja proizvoda. = Work sampling of product development activities. Tehnički vjesnik, 23 (6). pp. 1547-1554. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 3.
Škrapić, Filip (2016) Dinamika i regulacija procesa otplinjavanja. = Deaeration process dynamics and control. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Lončar, Dražen.
Škrtić, Antonio (2016) Konstrukcija električnog pogona visokotlačne pumpe za ubrizgavanje goriva. = Design of electrical drivetrain of high pressure fuel pump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Škugor, Branimir (2016) Modeliranje i optimalno punjenje floteelektričnih dostavnih vozila. = Modeliranjei optimalno punjenje flote električnih dostavnih vozila. Doctoral thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Deur, Joško.
Škugor, Branimir and Deur, Joško (2016) Delivery vehicle fleet data collection, analysis and naturalistic driving cycles synthesis. = Delivery vehicle fleet data collection, analysis and naturalistic driving cycles synthesis. International Journal of Innovation and Sustainable Development, 10 (1). pp. 19-39. ISSN 1740-8822. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 2.
Škugor, Branimir and Deur, Joško (2016) A bi-level optimisation framework for electric vehicle fleet charging management. = A bi-level optimisation framework for electric vehicle fleet charging management. Applied Energy, 184. pp. 1332-1342. ISSN 0306-2619. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 2. (In Press)
Škugor, Branimir and Deur, Joško and Ivanović, Vladimir (2016) Dynamic programming-based design of shift scheduling map taking into account clutch energy losses during shift transients. = Dynamic programming-based design of shift scheduling map taking into account clutch energy losses during shift transients. In: SAE 2016 World Congress and Exhibition, 12-14.4.2016., Detroit, MI, United States.
Škugor, Toni (2016) Konstrukcijsko rješenje varijatora s parom tanjurastih i konusnih tarenica. = Design solution of CVT with paring of flat plates and conus wheels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Galić, Ivica.
Škurić, Vanja and De Jaeger, Peter and Jasak, Hrvoje (2016) Model kontakta s efektima podmazivanja za simulacije postupka hladnog valjanja. = Lubricated contact model for cold metal rolling processes. In: Sedmi susret Hrvatskog društva za mehaniku, 16-17.06.2016., Split, Hrvatska.
Šnajdar Musa, Mateja and Marić, Gojko and Grilec, Krešimir (2016) Nanoindentation of closed cell Al alloy foams subjected to different heat treatment regimes. = Nanoindentation of closed cell Al alloy foams subjected to different heat treatment regimes. Composites Part B: Engineering, 89. pp. 383-387. ISSN 1359-8368. Vrsta rada: Editorial. Kvartili JCR: Q1 (2016). Točan broj autora: 3.
Šokčević, Tomislav (2016) Prijedlog konstrukcije za osiguranje podesivog kontakta s pedalom bicikla. = Design proposal for ensuring adjustable bicycle pedal contact. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Sušić, Aleksandar.
Šolić, Sanja and Godec, Matjaž and Schauperl, Zdravko (2016) EBSD analiza acikularnog i bainitnog ferita u zavarima čelika iso 3183 x80m u ovisnosti o udjelu co2 u zaštitnom plinu pri mag zavarivanju. = EBSD Analysis of accicular and bainite ferrite in ISO 3183 X80M steel dependingof CO2 content in shielding gas in MAG welding. In: 41st CWS International conference Welding - Zavarivanje 2016, Opatija, Hrvatska.
Šolić, Sanja and Godec, Matjaž and Schauperl, Zdravko and Donik, Črtomir (2016) Improvement in abrasion wear resistance and microstructural changes with deep cryogenic treatment of austempered ductile cast iron (ADI). = Improvement in abrasion wear resistance and microstructural changes with deep cryogenic treatment of austempered ductile cast iron (ADI). Metallurgical and Materials Transactions A, 47 (10). pp. 5058-5070. ISSN 1073-5623. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 4.
Špoljar, Marko (2016) Ispitivanje kompozitnih tvorevina za primjenu u automobilskoj industriji. = Testing of composite product for application in automotive industry. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pilipović, Ana.
Špoljarić, Andreja (2016) Grafičko sučelje u prikazu generalizacijskog svojstva unaprijedne neuronske mreže. = Neural network graphical interface in demonstration of feed forward neural network generalisation property. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Majetić, Dubravko.
Šprljan, Pavle and Jurišić, Goran and Bibić, Goran and Geceg, Tomislav and Lovrić, Hrvoje and Pavković, Danijel and Cipek, Mihael (2016) Comparative analysis of drilling equipment (Market survey). = Comparative analysis of drilling equipment (Market survey). UNSPECIFIED.
Šprljan, Pavle and Jurišić, Goran and Bibić, Goran and Geceg, Tomislav and Lovrić, Hrvoje and Pavković, Danijel and Cipek, Mihael (2016) Control system concepts for drill-string and mud pump electrical drives for straight drilling operations. = Control system concepts for drill-string and mud pump electrical drives for straight drilling operations. UNSPECIFIED.
Šprljan, Pavle and Jurišić, Goran and Bibić, Goran and Geceg, Tomislav and Lovrić, Hrvoje and Pavković, Danijel and Cipek, Mihael (2016) Control system design, verification and stability analysis for drill-string and mud pump electrical drives for drilling operations. = Control system design, verification and stability analysis for drill-string and mud pump electrical drives for drilling operations. UNSPECIFIED.
Šprljan, Pavle and Jurišić, Goran and Bibić, Goran and Geceg, Tomislav and Lovrić, Hrvoje and Pavković, Danijel and Cipek, Mihael (2016) Design and verification of simulation models for drill-string and mud pump electrical drives for straight drilling operations. = Design and verification of simulation models for drill-string and mud pump electrical drives for straight drilling operations. UNSPECIFIED.
Šprljan, Pavle and Jurišić, Goran and Bibić, Goran and Geceg, Tomislav and Lovrić, Hrvoje and Pavković, Danijel and Cipek, Mihael (2016) Modeling of drill-string drives for rotational and longitudinal motion during vertical drilling. = Modeling of drill-string drives for rotational and longitudinal motion during vertical drilling. UNSPECIFIED.
Štahan, Valentino (2016) Bežično upravljanje hodajućeg robota pokretanog umjetnim pneumatskim mišićima. = Wireless control of a walking robot driven by pneumatic artificial muscles. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Šitum, Željko.
Štefanić, Nedeljko and Veža, Ivica and Štefanić, Anja and Brnadić, Tomislav (2016) Industry 4.0: From SMART Factory to SMART Hospital. = Industry 4.0: From SMART Factory to SMART Hospital. In: LEAN Spring Summit 2016, 31.05.-02.06.2016., Šibenik, Hrvatska.
Štefančić, Hrvoje (2016) Pasivni dinamički prigušivač vjetrom uzrokovanih vibracija. = Passive dynamic damper for wind-induced vibrations. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jokić, Marko.
Štivić, Josip (2016) Sustavi filtracije motornog benzina i dizelskog goriva. = Filtration systems for gasoline and diesel engine fuels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.
Štorga, Mario and Škec, Stanko and Martinec, Tomislav and Perišić, Marija Majda (2016) Monitoring, measurement and simulation of individual and teamwork performance in collaborative product development and design. = Monitoring, measurement and simulation of individual and teamwork performance in collaborative product development and design. In: Human Life Design (HLD) International Symposium JAIST 2016, 26-29.03.2016., Kanazawa, Japan.
Štrbac, Hrvoje (2016) Projekt postrojenja za pripremu kotlovske napojne vode. = Design of boiler feed water treatment plant. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Juretić, Hrvoje.
Šušak, Ivan (2016) Proračun naprezanja glavčine kotača prednjeg ovjesa bolida Formule student FSB RT04. = Stress analysis of a wheel carrier of front suspension of Formula student FSB RT04 car. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Kozarac, Darko.
Švaco, Marko and Jerbić, Bojan and Stiperski, Ivan and Dlaka, Domagoj and Vidaković, Josip and Šekoranja, Bojan (2016) T-Phantom: a new phantom design for neurosurgical robotics. = T-Phantom: a new phantom design for neurosurgical robotics. In: 27th DAAAM International Symposium On Intelligent Manufacturing And Automation, 26-29.10.2016., Mostar, BiH.
Žarko, Marko (2016) Određivanje naprezanja u Ahilovoj tetivi kod skoka s mjesta. = Determination of the stress in the achilles tendon during standing jump. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Jurčević Lulić, Tanja.
Ždravac, Antonio (2016) Analiza induciranog otpora pri strujanju oko stražnjeg krila natjecateljskog automobila. = Analysis of induced drag in flow over rear wing of race car. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Krizmanić, Severino.
Žiha, Kalman (2016) Relating fracture mechanics and fatigue lifetime prediction. = Relating fracture mechanics and fatigue lifetime prediction. Materials Science & Engineering A, 651. pp. 167-176. ISSN 0921-507793. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q1 (2016). Točan broj autora: 1.
Žiher, Ante (2016) Analiza prikladnosti različitih vrsta ogrjevnog drva u obliku drvne sječke kao goriva za male i srednje kotlove. = Analysis of the suitability of different firewood species in the form of wood chips as a fuel for small and medium boilers. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Ljubas, Davor.
Živić, Josip (2016) Analiza pulsirajućeg strujanja u krvnim žilama. = Analysis of pulsatile flow in blood vessels. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Virag, Zdravko.
Živić, Marija and Galović, Antun and Avsec, Jurij and Holik, Mario (2016) Exergy analysis of a Brayton cycle with variable physical properties and variable composition of working substance. = Exergy analysis of a Brayton cycle with variable physical properties and variable composition of working substance. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (3). pp. 801-808. ISSN 1848-6339. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. Kvartili JCR: Q3 (2016). Točan broj autora: 4.
Živković, Dario (2016) Simulacija promjene opterećenja Francisove hidrauličke turbine. = Simulation of Francis hydraulic turbine load variation. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Tuković, Željko.
Živčić, Ivančica (2016) Analiza mikrostrukture keltskog mača. = Microstructure analysis of the Celtic sword. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Rede, Vera.
Žmak, Irena and Filetin, Tomislav and Unkić, Faruk (2016) Ductile iron microstructure prediction based on melt thermal analysis using artificial neural networks. = Ductile iron microstructure prediction based on melt thermal analysis using artificial neural networks. In: The 48th International October Conference on Mining and Metallurgy, 28.09.-01.10.2016., Bor, Srbija.
Žmak, Irena and Schauperl, Zdravko and Grilec, Krešimir (2016) Inženjerstvo materijala – temelj inovativne ekonomije. = Materials engineering – the basics of innovative economy. In: International Conference on Materials, Tribology, Recycling, MATRIB 2016, 23-25.06.2016., Vela Luka, Hrvatska.
Žmak, Irena and Vurnek, Vjekoslav and Šundrica, Jadran (2016) Flexural modulus of polyester Resin/Miscanthus×giganteus biocomposites. = Flexural modulus of polyester Resin/Miscanthus×giganteus biocomposites. In: 16th International Conference on New Trends in Fatigue and Fracture - NT2F16, 24-27.05.2016., Hrvatska, Dubrovnik.
Žulić, Antun (2016) Kanalokopač s rotorom pogonjen traktorom. = Tractor mounted rotary ditcher. Master's thesis (Bologna) , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Neven.
Župančić, Ivan (2016) Projektiranje elektromotornog servopogona osi obradnog sustava zasnovano na istosmjernom servomotoru male snage. = Design of machining tool axis electrical servodrive based on low-power DC servomotor. Undergraduate thesis , Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, UNSPECIFIED. Mentor: Pavković, Danijel.
